English SMA - Procedure Text (How to make origami crane)
1.
2.
3.
4. SOSIAL FUNCTION :
To tell how make the origami crane
MATERIAL :
A Square sheet of paper
5. 1.
2. Unfold, and fold in half the other way.
Fold the paper in half, into a rectangle.
6. 1. Unfold your rectangle. Turn the paper over and fold in half
into a triangle. You should see the back of your paper. Unfold
and repeat along the other diagonal.
2. Unfold your paper and turn it back over. You should see the
diagonal creases create”valley” and the perpendicular creases
create”mountains”
1
2
7. 3. Bring the corners together. Allow the valley creases to meet in
the middle.
4. Align the square. By flattening
two opposite sides, you should
find yourself with a square that
is open on the bottom. Make
sure your square is rotated so
that the opening is on the
bottom, as shown in the
picture.
8. 5. Bring the right corner of the top flap to the middle crease, so
that the lower right edge lines up with the crease.
6. Repeat this action on the left, so that the top looks like a kite
9. 7. Fold down the top corner to
make the crease lie along the
horizontal line created in the
previous two steps.
8. Unfold. In doing so, you return
to having a square with an
opening facing down.
10. 9. Take the bottom corner of the
square and start to fold it up
along the horizontal crease you
made in the previous two steps.
10. As you fold, note the four diagonal
creases on the inside that you made
earlier. You will need to reverse the two
creases on the upper flap. To reverse a
crease, fold it in the opposite direction
that it naturally folds.
11. 11. Bring the outer edges to the middle
and flatten, so that you have a
diamond.
12. Turn your paper over, and
repeat the previous five steps.
12. 13. Fold the edges to the
middle crease.
14. Repeat on the other side
13 14
13. 15. Take the bottom tip of the top flap
and fold it up to the top corner. Turn
over and repeat on the other side.
16. Fold the right flap over to the left (in the same
manner as turning the page of a book). Turn
over and repeat on the back. Now the head and
tail are nestled in between what will become the
wings.
14. 17. Fold the wings down so that they
are perpendicular to the body,
head and tail.
18. Fold the tip of the head down.
15. 19. Pull the head and tail out so that they line up with the
outer edges of the body.