Submit Search
Upload
IRJET - Mechanical and Wear Properties of Friction Stir Welding of Aluminium Alloys
•
0 likes
•
14 views
IRJET Journal
Follow
https://www.irjet.net/archives/V7/i4/IRJET-V7I4108.pdf
Read less
Read more
Engineering
Report
Share
Report
Share
1 of 5
Download now
Download to read offline
Recommended
IRJET - Characteristics of Butt Joint Produced by Friction Stir Welding Process
IRJET - Characteristics of Butt Joint Produced by Friction Stir Welding Process
IRJET Journal
IRJET- Friction Stir Welding of AA5052& AA6061 Aluminium Alloy by using T...
IRJET- Friction Stir Welding of AA5052& AA6061 Aluminium Alloy by using T...
IRJET Journal
An Experimental Investigation on Mechanical Properties of Friction Stir Weldi...
An Experimental Investigation on Mechanical Properties of Friction Stir Weldi...
IRJET Journal
O046058993
O046058993
IJERA Editor
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
IRJET Journal
A Novel Method for Joining of Aluminium Alloy AA6061 Plates by Friction Stir ...
A Novel Method for Joining of Aluminium Alloy AA6061 Plates by Friction Stir ...
IRJET Journal
Experimental Investigation for Mechanical Properties of Aluminium Alloy Al 60...
Experimental Investigation for Mechanical Properties of Aluminium Alloy Al 60...
IRJET Journal
IRJET- Optimization and Characterization of Dissimilar Welding of AA5083 & AA...
IRJET- Optimization and Characterization of Dissimilar Welding of AA5083 & AA...
IRJET Journal
Recommended
IRJET - Characteristics of Butt Joint Produced by Friction Stir Welding Process
IRJET - Characteristics of Butt Joint Produced by Friction Stir Welding Process
IRJET Journal
IRJET- Friction Stir Welding of AA5052& AA6061 Aluminium Alloy by using T...
IRJET- Friction Stir Welding of AA5052& AA6061 Aluminium Alloy by using T...
IRJET Journal
An Experimental Investigation on Mechanical Properties of Friction Stir Weldi...
An Experimental Investigation on Mechanical Properties of Friction Stir Weldi...
IRJET Journal
O046058993
O046058993
IJERA Editor
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
IRJET Journal
A Novel Method for Joining of Aluminium Alloy AA6061 Plates by Friction Stir ...
A Novel Method for Joining of Aluminium Alloy AA6061 Plates by Friction Stir ...
IRJET Journal
Experimental Investigation for Mechanical Properties of Aluminium Alloy Al 60...
Experimental Investigation for Mechanical Properties of Aluminium Alloy Al 60...
IRJET Journal
IRJET- Optimization and Characterization of Dissimilar Welding of AA5083 & AA...
IRJET- Optimization and Characterization of Dissimilar Welding of AA5083 & AA...
IRJET Journal
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET Journal
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
IRJET Journal
Optimization of Process Parameters of Tool Wear in Turning Operation
Optimization of Process Parameters of Tool Wear in Turning Operation
IJERA Editor
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
IRJET Journal
An Experimental Analysis and Optimization of Process Parameters on Friction S...
An Experimental Analysis and Optimization of Process Parameters on Friction S...
IRJET Journal
Ds34728732
Ds34728732
IJERA Editor
Ijebea14 215
Ijebea14 215
Iasir Journals
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IJERD Editor
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET Journal
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
IRJET Journal
ijaerv10n68spl_104
ijaerv10n68spl_104
Cyril Mathew Samuel
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
IRJET Journal
Finite element modeling and bending stress analysis of non standard spur gear
Finite element modeling and bending stress analysis of non standard spur gear
eSAT Journals
Artigo inox parâmetros 304
Artigo inox parâmetros 304
Dejean Machado
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
IRJET Journal
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
IRJET Journal
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
ijiert bestjournal
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET Journal
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
IRJET Journal
Investigation of turning process to improve productivity mrr for better sur...
Investigation of turning process to improve productivity mrr for better sur...
IAEME Publication
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
IRJET Journal
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
IRJET Journal
More Related Content
What's hot
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET Journal
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
IRJET Journal
Optimization of Process Parameters of Tool Wear in Turning Operation
Optimization of Process Parameters of Tool Wear in Turning Operation
IJERA Editor
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
IRJET Journal
An Experimental Analysis and Optimization of Process Parameters on Friction S...
An Experimental Analysis and Optimization of Process Parameters on Friction S...
IRJET Journal
Ds34728732
Ds34728732
IJERA Editor
Ijebea14 215
Ijebea14 215
Iasir Journals
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IJERD Editor
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET Journal
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
IRJET Journal
ijaerv10n68spl_104
ijaerv10n68spl_104
Cyril Mathew Samuel
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
IRJET Journal
Finite element modeling and bending stress analysis of non standard spur gear
Finite element modeling and bending stress analysis of non standard spur gear
eSAT Journals
Artigo inox parâmetros 304
Artigo inox parâmetros 304
Dejean Machado
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
IRJET Journal
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
IRJET Journal
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
ijiert bestjournal
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET Journal
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
IRJET Journal
Investigation of turning process to improve productivity mrr for better sur...
Investigation of turning process to improve productivity mrr for better sur...
IAEME Publication
What's hot
(20)
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Prediction of Angular Distortion in TIG Welded Stainless Steel 202 She...
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
IRJET- Selection for Better and Increased Tool Life by the Use of HSS Cutting...
Optimization of Process Parameters of Tool Wear in Turning Operation
Optimization of Process Parameters of Tool Wear in Turning Operation
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
IRJET- Analysis and Comparison of Friction Stir Welding on Various Aluminum A...
An Experimental Analysis and Optimization of Process Parameters on Friction S...
An Experimental Analysis and Optimization of Process Parameters on Friction S...
Ds34728732
Ds34728732
Ijebea14 215
Ijebea14 215
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET- Optimization Machining Parameters in a Turning Operation of Steels to ...
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
IRJET - Effect of Groove Angle on Tensile Strength and Micro-hardness of AISI...
ijaerv10n68spl_104
ijaerv10n68spl_104
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
IRJET - Mathematical Modelling to Predict Bead Geometry and Shape Relationshi...
Finite element modeling and bending stress analysis of non standard spur gear
Finite element modeling and bending stress analysis of non standard spur gear
Artigo inox parâmetros 304
Artigo inox parâmetros 304
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
IRJET- Prediction of Angular Distortion in GTA Welded Stainless Steel 304 Pla...
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
Study and Analysis of the Fatigue Behaviour of Friction Stir Butt Welded Dis...
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
OPTIMIZATION OF CUTTING PARAMETERS FOR CUTTING FORCE IN TURNING OF AISI 904L...
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
Experimental Investigations of Friction Stir Welding (FSW) on Al 6061 : A Cas...
Investigation of turning process to improve productivity mrr for better sur...
Investigation of turning process to improve productivity mrr for better sur...
Similar to IRJET - Mechanical and Wear Properties of Friction Stir Welding of Aluminium Alloys
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
IRJET Journal
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
IRJET Journal
Experimental Analysis on TIG welding process parameters of SS304 By Using Tag...
Experimental Analysis on TIG welding process parameters of SS304 By Using Tag...
IRJET Journal
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...
IJAEMSJORNAL
30120130405027
30120130405027
IAEME Publication
Optimisation of Process parameter for Friction Stir Welding of Aluminium allo...
Optimisation of Process parameter for Friction Stir Welding of Aluminium allo...
IRJET Journal
Optimization of FSW Process Parameter to Achieve Maximum Tensile Strength of ...
Optimization of FSW Process Parameter to Achieve Maximum Tensile Strength of ...
IRJET Journal
Experimental Analysis on Wire Arc Additive Manufacturing
Experimental Analysis on Wire Arc Additive Manufacturing
IRJET Journal
IRJET- Analysis of Dimpled Sheet and its Optimization using Taguchi Method
IRJET- Analysis of Dimpled Sheet and its Optimization using Taguchi Method
IRJET Journal
IRJET- Determination of Formability Index of Sheet Metals
IRJET- Determination of Formability Index of Sheet Metals
IRJET Journal
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET Journal
An Investigation on Effect of Welding Speed on Strength of Welded Joint using...
An Investigation on Effect of Welding Speed on Strength of Welded Joint using...
IRJET Journal
Friction stir welding of aluminium 5086 alloys
Friction stir welding of aluminium 5086 alloys
eSAT Journals
Optimization of Process Parameters of Friction Stir Welding for Similar He-30...
Optimization of Process Parameters of Friction Stir Welding for Similar He-30...
IRJET Journal
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
IJERA Editor
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
IJERA Editor
Design and Experimental study of Friction stir welding of AA6061-T6 Alloy for...
Design and Experimental study of Friction stir welding of AA6061-T6 Alloy for...
IRJET Journal
Optimizing the process parameters of friction stir butt welded joint on alumi...
Optimizing the process parameters of friction stir butt welded joint on alumi...
eSAT Publishing House
Multi objective Optimization of TIG welding AA6061 alloy using response surfa...
Multi objective Optimization of TIG welding AA6061 alloy using response surfa...
IRJET Journal
IRJET- Experimental Investigation of Wear Rate using Alternating Material for...
IRJET- Experimental Investigation of Wear Rate using Alternating Material for...
IRJET Journal
Similar to IRJET - Mechanical and Wear Properties of Friction Stir Welding of Aluminium Alloys
(20)
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
Experimental Investigation of Welding Parameters for A MIG Welding With SS304...
Experimental Analysis on TIG welding process parameters of SS304 By Using Tag...
Experimental Analysis on TIG welding process parameters of SS304 By Using Tag...
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...
Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A ...
30120130405027
30120130405027
Optimisation of Process parameter for Friction Stir Welding of Aluminium allo...
Optimisation of Process parameter for Friction Stir Welding of Aluminium allo...
Optimization of FSW Process Parameter to Achieve Maximum Tensile Strength of ...
Optimization of FSW Process Parameter to Achieve Maximum Tensile Strength of ...
Experimental Analysis on Wire Arc Additive Manufacturing
Experimental Analysis on Wire Arc Additive Manufacturing
IRJET- Analysis of Dimpled Sheet and its Optimization using Taguchi Method
IRJET- Analysis of Dimpled Sheet and its Optimization using Taguchi Method
IRJET- Determination of Formability Index of Sheet Metals
IRJET- Determination of Formability Index of Sheet Metals
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
IRJET- Experimental Analysis of Aluminium Alloys for Aerospace Applications
An Investigation on Effect of Welding Speed on Strength of Welded Joint using...
An Investigation on Effect of Welding Speed on Strength of Welded Joint using...
Friction stir welding of aluminium 5086 alloys
Friction stir welding of aluminium 5086 alloys
Optimization of Process Parameters of Friction Stir Welding for Similar He-30...
Optimization of Process Parameters of Friction Stir Welding for Similar He-30...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Effect of Process Parameters of Friction Stir Welded Joint for Similar Alumin...
Design and Experimental study of Friction stir welding of AA6061-T6 Alloy for...
Design and Experimental study of Friction stir welding of AA6061-T6 Alloy for...
Optimizing the process parameters of friction stir butt welded joint on alumi...
Optimizing the process parameters of friction stir butt welded joint on alumi...
Multi objective Optimization of TIG welding AA6061 alloy using response surfa...
Multi objective Optimization of TIG welding AA6061 alloy using response surfa...
IRJET- Experimental Investigation of Wear Rate using Alternating Material for...
IRJET- Experimental Investigation of Wear Rate using Alternating Material for...
More from IRJET Journal
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
IRJET Journal
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
IRJET Journal
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
IRJET Journal
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
IRJET Journal
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
IRJET Journal
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
IRJET Journal
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
IRJET Journal
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
IRJET Journal
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
IRJET Journal
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
IRJET Journal
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
IRJET Journal
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
IRJET Journal
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
IRJET Journal
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
IRJET Journal
React based fullstack edtech web application
React based fullstack edtech web application
IRJET Journal
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
IRJET Journal
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
IRJET Journal
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
IRJET Journal
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
IRJET Journal
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
IRJET Journal
More from IRJET Journal
(20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
React based fullstack edtech web application
React based fullstack edtech web application
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Recently uploaded
Biology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptx
DeepakSakkari2
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
KurinjimalarL3
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur High Profile
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
RajaP95
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZTE
Internship report on mechanical engineering
Internship report on mechanical engineering
malavadedarshan25
Current Transformer Drawing and GTP for MSETCL
Current Transformer Drawing and GTP for MSETCL
DeelipZope
main PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfid
NikhilNagaraju
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
João Esperancinha
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
9953056974 Low Rate Call Girls In Saket, Delhi NCR
IVE Industry Focused Event - Defence Sector 2024
IVE Industry Focused Event - Defence Sector 2024
Mark Billinghurst
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
ranjana rawat
chaitra-1.pptx fake news detection using machine learning
chaitra-1.pptx fake news detection using machine learning
misbanausheenparvam
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
Suhani Kapoor
Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.
eptoze12
Study on Air-Water & Water-Water Heat Exchange in a Finned Tube Exchanger
Study on Air-Water & Water-Water Heat Exchange in a Finned Tube Exchanger
Anamika Sarkar
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
soniya singh
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentation
GDSCAESB
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
Soham Mondal
Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...
VICTOR MAESTRE RAMIREZ
Recently uploaded
(20)
Biology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptx
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
Internship report on mechanical engineering
Internship report on mechanical engineering
Current Transformer Drawing and GTP for MSETCL
Current Transformer Drawing and GTP for MSETCL
main PPT.pptx of girls hostel security using rfid
main PPT.pptx of girls hostel security using rfid
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
IVE Industry Focused Event - Defence Sector 2024
IVE Industry Focused Event - Defence Sector 2024
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANVI) Koregaon Park Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
chaitra-1.pptx fake news detection using machine learning
chaitra-1.pptx fake news detection using machine learning
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
Oxy acetylene welding presentation note.
Oxy acetylene welding presentation note.
Study on Air-Water & Water-Water Heat Exchange in a Finned Tube Exchanger
Study on Air-Water & Water-Water Heat Exchange in a Finned Tube Exchanger
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentation
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...
IRJET - Mechanical and Wear Properties of Friction Stir Welding of Aluminium Alloys
1.
INTERNATIONAL RESEARCH JOURNAL
OF ENGINEERING AND TECHNOLOGY (IRJET) E-ISSN: 2395-0056 P-ISSN: 2395-0072 VOLUME: 07 ISSUE: 04 | APR 2020 WWW.IRJET.NET © 2020, IRJET Impact Factor value:7.34 ISO 9001:2008Certified Journal | Page 518 MECHANICAL AND WEAR PROPERTIES OF FRICTION STIR WELDING OF ALUMINIUM ALLOYS Dr. D Santha Rao , P.D.S.K. Prasad, M. Megha Shyam, G. Chandu, K. Bala Murali Reddy ------------------------------------------------------------------------------------- ***------------------------------------------------------------------------- Abstract : The welding is the process of joining similar metals and dissimilar metals by melting the material with or without the use of filler material. Aluminum alloys are the major applications in welding process like aerospace industries, ship building industries. Friction stir welding is a novel technique for production of joints in solid state. The various process parameters are spindle speed, feed, load and geometry of the tool. The joining of similar Aluminum Alloys was carried out using friction stir welding (FSW) techniques are rotational speed, transverse speed, tool geometry. In this process aluminum alloy butt joint are prepared using Friction stir welding with varying process parameters are rotation speed, transverse speed by keeping constant load and tool geometry. The mechanical properties such as tensile strength, hardness and impact strength were evaluated. The microstructures of joints were analyzed using optical microscope and scanning electron microscope. The wear properties were also analyzed using pin and disk apparatus. Index Terms - Component, formatting, style, styling, insert. KEYWORDS: Conical Plane Tapered Tool, Tensile Strength, Impact Strength, Hardness, Microstructure, Wear Strength, Friction Stir Welding. 1. INTRODUCTION Friction stir welding (FSW) is a relatively new joining process that has been used for high production since 1996. Because melting does not occur and joining takes place below the melting temperature of the material, a high-quality weld is created. This characteristic greatly reduces the ill effects of high heat input, including distortion, and eliminates solidification defects. Friction stir welding also is highly efficient, produces no fumes, and uses no filler material, which make this process environmentally friendly. The joining of similar Aluminium Alloys was carried out using friction stir welding (FSW) technique and the process parameters were optimized using Taguchi orthogonal design of experiments. The rotational speed, transverse speed, tool geometry and ratio between tool shoulder diameter and pin diameter were the parameters taken into consideration. The optimum process parameters were determined with reference to tensile strength of the joint. The predicted optimal value of tensile strength was confirmed by conducting the confirmation run using optimum parameters. This study shows that defect free, high efficiency welded joints can be produced using a wide range of process parameters and recommends parameters for producing best joint tensile properties. The other properties like hardness, impact strength, wear and corrosion of the welded joint will be estimated. The joining of similar Aluminium Alloys was carried out using friction stir welding (FSW) technique and the process parameters were optimized using Taguchi orthogonal design of experiments. The rotational speed, transverse speed, tool geometry and ratio between tool shoulder diameter and pin diameter were the parameters taken into consideration. The optimum process parameters were determined with reference to tensile strength of the joint. The predicted optimal value of tensile strength was confirmed by conducting the confirmation run using optimum parameters. This study shows that defect free, high efficiency welded joints can be produced using a wide range of process parameters and recommends parameters for producing best joint tensile properties. The other properties like hardness, impact strength and wear of the welded joint will be estimated. 2. IDENTATIONS The base materials selected for this investigation were AA5083 aluminium alloys plate of 6 mm thickness having chemical composition and mechanical properties shown in the Table I In the present study, sheets of size 140mm x 70mm of AA5083 were cut for welding by FSW.
2.
INTERNATIONAL RESEARCH JOURNAL
OF ENGINEERING AND TECHNOLOGY (IRJET) E-ISSN: 2395-0056 P-ISSN: 2395-0072 VOLUME: 07 ISSUE: 04 | APR 2020 WWW.IRJET.NET © 2020, IRJET Impact Factor value:7.34 ISO 9001:2008Certified Journal | Page 519 Aluminium - balance Chromium - 0.05-0.25% max Copper - 0.1% max Iron - 0.4% max Magnesium - 4.0 to 4.9% Manganese - 0.4 to 1.0% Silicon - 0.4% max Titanium - 0.15% max Zinc - 0.25% max 3. FIGURES AND TABLES Fig 3.1: conical plane tapered too Table 3.2: process parameters of the tool TOOL SPEED [rpm] FEED PER DEPTH[mm] TILT ANGLE[deg] 560 20 1 710 30 1 900 40 1 1120 50 1 1400 60 1
3.
INTERNATIONAL RESEARCH JOURNAL
OF ENGINEERING AND TECHNOLOGY (IRJET) E-ISSN: 2395-0056 P-ISSN: 2395-0072 VOLUME: 07 ISSUE: 04 | APR 2020 WWW.IRJET.NET © 2020, IRJET Impact Factor value:7.34 ISO 9001:2008Certified Journal | Page 520 Fig 3.3: welding method In FSW process heat generated by friction between the surface of the plates and the contact surface of a special tool, composed of two main parts are shoulder and pin. Shoulder is responsible for the generation of heat and for containing the plasticized material in the weld zone, while pin mixes the material of the components to be welded, thus creating a joint. This allows for producing defect-free welds characterized by good mechanical and corrosion properties. Fig 3.4: welding specimens
4.
INTERNATIONAL RESEARCH JOURNAL
OF ENGINEERING AND TECHNOLOGY (IRJET) E-ISSN: 2395-0056 P-ISSN: 2395-0072 VOLUME: 07 ISSUE: 04 | APR 2020 WWW.IRJET.NET © 2020, IRJET Impact Factor value:7.34 ISO 9001:2008Certified Journal | Page 521 These specimens are cut by requirement tests by manual vertical CNC machine with ASTM standards of FSW process. The alloys are fine structure it can be performed by the process which can be processed some other properties with the help of process parameters. Fig 3.5: cutting specimens for testing The mechanical properties of a material are those which affect the mechanical strength and ability of a material to be molded in suitable shape. Some of the typical mechanical properties of a material include 1. Tensile strength 2. Impactstrength 3. Hardness test 4. Microstructure 5. Wear test 4. CONCLUSIONS 1. The Analysis of Variance for the ultimate tensile strength result concludes that the designis the most significant parameter with a percentage of 67.91%. 2. The Analysis of Variance for the yield strength result concludes that the tool design is the most significant parameter with a percentage of 21.03%. 3. The Analysis of Variance for the % of elongation result concludes that the tool design is the most significant parameter with a percentage of 23.76%. 4. The Analysis of Variance for the Impact Strength result concludes that the tool desion is the most significant parameter with a percentage of 30%.
5.
INTERNATIONAL RESEARCH JOURNAL
OF ENGINEERING AND TECHNOLOGY (IRJET) E-ISSN: 2395-0056 P-ISSN: 2395-0072 VOLUME: 07 ISSUE: 04 | APR 2020 WWW.IRJET.NET © 2020, IRJET Impact Factor value:7.34 ISO 9001:2008Certified Journal | Page 522 5. The optimum combination of parameters obtained from the main effect plot for mean is process parameters of tool design of taper cylindrical, Different welding speeds (mm/min). The aluminum plates were welded using rounded profile tool at a speed of 560 rpm to 1400 rpm with different feeds. The welded plates were first sectioned according to the specific test specimen dimensions are noticed, the following tests which were performed on the welded plates are as given below: Destructive Testing is conducted as below UTM (Universal Testing Machine) , Hardness Testing , Impact Testing, Hardness testing, microstructure testing, Wear testing were noticed in the alloy on FSW in the second joint. Since the second phase particles were not discernible by optical microscopy. Density of precipitates has decreased as a result of coarsening; Grain boundary precipitates have also coarsened. The effects of process and tool parameters on macrostructure of the friction stir welded joints. Table 5: Mechanical properties of FSW specimens S.NO MATERIAL HARDNESS[ppm] ELONGATION[%] TENSILE STRENGTH[Pa] IMPACT STRENGTH[joules] 1 BASE MATAL 96.5 23.36 287.765 30 2 SAMPLE-1 83.5 2.88 142.883 8 3 SAMPLE-2 84.8 6.80 232.373 8 4 SAMPLE-3 85.9 4.80 138.745 10 5 SAMPLE-4 85.8 2.60 139.983 16 6 SAMPLE-5 87.9 6.76 224.023 12 The wear test should be done on highest tensile and lowest tensile strength it will gives no loss occurs in the specimens. Wear of metals occurs by plastic displacement of surface and near-surface material and by detachment of particles that form wear derbis. Table 6: Mechanical properties of wear strength S NO MATERIAL ROTATION SPEED[rpm] WEAR STRENGTH[volume loss] 1 BASE METAL 650 VOLUME LOSS 2 SAMPLE 2 710 VOLUME LOSS 3 SAMPLE 3 900 VOLUME LOSS 5. REFERENCES [1] P. Murali Krishna, N. ramanaiah and K. Prasada Rao, “Optimization of process parameters for Friction Stir Welding of Dissimilar Aluminium alloys (AA2024-T6 and AA6351-T6) by using Taguchi Method,” International Journal of Industrial Engineering Computations 4 (2013) pp. 71-80. [2] C. W. Tan, Z. G. Jiang, L. Q. Li, Y. B. Chen, and X. Y. Chen, “Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding”, Materials and Design, 51, pp. 466-473, (2013). [3] Scialpi, L.A.C. De Filippis, P. Cavaliere, “Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminum alloy”, Journals for Materials and Design, Volume 28 (2007) 1124-1129 DOI:10.1016/j.matdes.2006.01.031 [4] Karthick, K.R.; Samuela, L.C.; Saravanan, M.; and Balachandar, K. (2014). An experimental investigation on friction stir welding of dissimilar aluminium alloys AA2014-T6 and AA6063-O. National Weld Meet, NWM2014, Kilakarai,India [5] A. Simar, T. Pardoen, B. de Meester, Influence of friction stir welding parameters on the power input and temperature distribution in aluminium alloys, 5th International FSW Symposium; Metz, France 14-16 September 2004.
Download now