Use Office Equipment

Use Office Equipment
Unit 221 Use office equipment 1.Know about different types of office equipment and its uses. 1.1
Identify different types of equipment and their uses. There are many different types of office
equipment in our work. The main one found in the offices are: –telephone– we use it to make and
receive a phone calls –printers– to print document and work papers –shredder– to shred important
notes, paper work –computers– we use them to many work related tasks. Word processor programs
are used to type up notes and minutes and to produce reports and communications, while
spreadsheet programs will be used in account keeping. Computers allow access to the Internet,
which provides both internal and external communication tools in the form ... Show more content on
Helpwriting.net ...
Disposing of waste cost company a lot of money. The bigger company the bigger bill. Also wasted
electricity cost a lot of money. We produce too much waste and we need to reduce this and recycle
whatever we can. And let's not forget about environment. Much of our waste ends up in landfill
sites. As the waste breaks down, it gives off carbon emissions, which is bad for the environment. By
reducing waste, a business can reduce its carbon footprint, which will help to decrease the negative
impact that the business has on the environment. 4. Know about the different types of problems that
may occur when using equipment and how to deal with them. Sometimes when we use office
equipment we may have different types of problems. They can delay our work or even make it
impossible to finish. We must know how to deal with them to be able work as effectively as
possible. 4.1 Give examples of equipment problems. We can have many different problems when we
use office equipment. They may be caused by technical problems or simply they can be caused by
us. For example, one of the possible problems can be problems with printer. We can run out with
toner, or paper, or paper can comes out of the printer very creased. Or computer, we can have lot of
problems with it. Computer can crashed or we can forget to save our files and we will lose them, or
some programs can refuse to work. As we can see when we use office equipment we may occur
many different
... Get more on HelpWriting.net ...

Personal Protective Equipment Essay
Many work environments depend on the proper use of personal protective equipment (PPE) to keep
workers safe. Although healthcare environments may be the first industry that comes to mind,
people who work with hazardous chemicals, dangerous machinery or equipment, and others all
require specific articles of PPE to stay safe.
Keeping PPE on hand and in excellent condition, however, is only a portion of the safety protocol.
Using and removing equipment correctly, at the right place and at the right time, is also required to
minimize the risk of employee injury or contamination.
Different types of PPE are designed to offer employees different types of protection. Those who
work with machinery are likely to require gloves as well as eye and ear protection at a minimum.
Those who work in healthcare environments may require anything from a basic respirator and
gloves to full ... Show more content on Helpwriting.net ...
Studies have confirmed the need for improvement in training procedures to help employees learn
how to adequately protect themselves. When full protective equipment is required, all parts of the
body must be completely shielded due to the risk of exposure to infected blood or bodily fluids.
Training employees to follow specific guidelines, such as the following for healthcare facilities, will
help to minimize the risk of contamination:
Studies verify that when workers are taught how to properly remove their PPE at an appropriate
time and place, positive changes tend to quickly become habits. Workers naturally want to protect
themselves but often need instruction on how to achieve that goal.
Once you have determined which types of PPE are needed and have provided your employees the
proper training to correctly use them, maintaining that usage over time will be the mark for true
success. PPE itself will need maintenance and replacement and the workers involved will require
periodic bouts of refreshment in safety

Personal Protective Equipment At Work Regulations 1992
Health and safety regulations
The Personal Protective Equipment at Work Regulations 1992
The main features of the regulation are to:
Ensure that suitable personal protective equipment (PPE) is provided from the employer free of
charge "wherever there are risks to health and safety that cannot be adequately controlled in other
ways." The PPE must be 'suitable and correct' for the risk in question, and include protective face
masks and goggles, safety helmets, gloves, air filters, ear defenders, overalls and protective
footwear.
Responsibilities that are placed upon the employer and the employees
Employer
Provide the correct personal protective equipment (PPE) that is adequate for each individual
depending on the job role / location to maintain

Executive Summary : The Heavy Equipment Manufacturing...
Executive Summary–R1
The heavy equipment manufacturing industry, more commonly referred to as "machinery
manufacturing," includes construction equipment, mining equipment, and agricultural machinery.
Construction machinery includes earthmoving equipment, concrete equipment and road equipment
such as cranes, loaders, draglines, mixers, pavers, and excavators that can be used in the building
and mining industries. Agricultural equipment generally refers to compact tractors, combine
harvesters, and other farm equipment, while the mining equipment market includes underground
mining equipment, portable drilling rigs and parts, crushing machinery, and other screening,
washing, and combination equipment.
The global machinery market had revenues of $243.8B in 2012, an 8.1% increase over the previous
year and compound annual growth rate of 4.6% from 2008–2012. Asia–Pacific accounts for 38.9%
of the global machinery market with total revenues of $94.8B, while the Americas make up 36.4%.
The US alone makes up 22% with $54.1B virtually equivalent to Europe's $54.2B.
The US machinery market was valued at $54.1B in 2012 and is expected to increase to $76.4B in
2017. This would be an increase of 41.3% over a five year period. During the period of 2008–2012,
the US machinery market realized a 4.2% compound growth rate. The construction machinery
segment was the market's most lucrative in 2012, with $32.1B in total revenues and accounting for
59.3% of the US market's overall value. The

Personal Protective Equipment Program
Safety Program Personal Protective Equipment Page 1 of 3
ABC Corporation
SAFETY PROGRAM
PERSONAL PROTECTIVE EQUIPMENT PROGRAM
Effective Date:
Safety Program Personal Protective Equipment Page 2 of 3
1. 1. Purpose 1.1. The purpose of this program is to limit injury or impairment to any part of the
body through absorption, inhalation, or physical contact by providing personal protective
equipment, including personal protective equipment for eyes, face, head, and extremities. PPE shall
be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by
reason of hazards of processes ... Show more content on Helpwriting.net ...
Responsibilities
5.1. Mark will maintain the Personal Protective Equipment Program at the location.
5.2. John will provide training to employees regarding the basis of the Personal Protective
Equipment Program.
5.3. Stacy will maintain documentation, such as employee training records.
5.4. Joshua must perform a hazard assessment and equipment selection for this location, complete
Document 132.2, Written Certification, and complete Document 132.3, Equipment Selection.
5.5. John will be available on site to answer questions concerning the Standard or any potential
injury or impairment. In addition, they may contact ABC Risk Management for any additional
information about the Standard and compliance.
5.6. Joshua must be shown a demonstration of proper use of PPE from the employee before the
employee can perform work.
5. Action Steps 6.1. Perform a hazard assessment and complete Document 132.2, Written
Certification, and 132.3, Equipment Selection.
6.2. Train employees using Personal Protective Equipment Training Script & Overheads.
6.3. Complete training records for documentation purposes.
6.4. Training

Chemotherapy Personal Protective Equipment
When handling a chemotherapy product personal protective equipment is vital in preventing
exposure to hazardous materials. Personal protective equipment includes: a long sleeve gown, with a
closed front and elasticized cuffs, googles or protective glasses with side shields, protective gloves
and closed shoes. The gown should be made of impermeable material and be disposable or have the
ability to be laundered at a facility that handles gowns that are used when preparing handled
materials. A different gown should be used daily. The gloves must be chemotherapy gloves made of
nitrile. Chemotherapy drugs generates some of the most hazardous waste in the medical field.
Proper disposal is vital. There is two different types of chemotherapy waste,

Baseball Equipment History
The History of Baseball Equipment Did you know that baseball was once called "the national
pastime?" So many people played the game as a child, or played softball. Baseball is also a
democratic game which means that players could be successful with average height and weight. The
equipment of baseball, bats, balls and gloves, has changed in many ways over the years. Baseball
has been around since before the American Civil War. (State, © 2000–2014)
The bat over time has evolved from wood to aluminum. The first baseball bat came in all shapes and
sizes. Kids experimented by making their own bats and testing them in games to see how they
would perform. In 1859, a bat could be no bigger than 2.5 diameters and in 1869; they ... Show
more content on Helpwriting.net ...
In 1870, the purpose of the baseball glove was to prevent injury from catching the baseball. The
baseball gloves were mostly just a leather pad. At the time, most people didn't use a baseball glove
or players might call them out by saying "softy!" Today in baseball, all players must have a glove to
play baseball. The gloves we use today have a pocket to make it easier to catch the ball. Also the
baseball glove has more padding so it doesn't hurt that much when you catch a 70 mph ball. There
are many different baseball gloves such as a first baseman's mitt, infielder's gloves, (which covers
second baseman, shortstop, and third baseman) outfielder gloves, pitcher, and catcher's mitt. The
first baseman's glove looks like a catcher's mitt but it's a little longer for an easier catch of infielder's
throws and has less padding, and a shallower pocket. The infielder's glove is designed a little smaller
with a shallower pocket for more flexibility. The outfielder's glove is larger and longer, it is roughly
a 12–inch glove that features deeper pockets. The pitcher's mitt is a lot like an infielder's glove,
except it has no holes. Without the holes, the batter can't see the pitch that will be thrown. The
catcher's mitt is built for protection, support, and durability. (Sports, 2014

Osha 's Ppe Standards ( Personal Protective Equipment ) Essay
In accordance with the OSHA's PPE standards (Personal Protective equipment), an assessment of a
motor vehicle garage was performed to identify if there were hazards present that would affect the
employees. Based on the assessment, applicable PPE's were selected for the affected employees.
The following are the guidelines that were used for the process. Survey The first step of the
assessment involved surveying the garage (workshop). This included a walk–through with the
purpose of identifying sources of hazards in areas of question such as paint shop, body shop, and
storage unit among others. Particular attention was given to the primary hazard categories that
include: penetration, impact, heat, compression, harmful dust and fumes, light and impact. These
categories were used as basis on which the sources of hazards were identified. Sources The survey
identified hazards to emanate from the following areas. The paint shop where chemical exposures
were high as a result of the fumes generated when painting cars. It was identified that paint fumes
are very toxic and could result in chronic medical conditions when employees are not well
protected. The body shop was the second area that was identified for hazards. There were numerous
machinery and many tools of work that were heavy, sharp, and dangerous. Especially the vehicle
lifts, car rampsand, and other socialized tools. These presented possible injuries resulting from
collusions and falling objects. The body workshop was a

Elements Of A Personal Protective Equipment Program
Personal Protective Equipment Program
The following report answers questions on a Personal Protective Equipment (PPE) Program project.
It will briefly describe the different components of a PPE Program for a company called ABC
Plastics and outline the elements of a typical program.
Scope and Description of the PPE Program
ABC Plastics Company will access the workplace to identify and evaluate the hazards present or
potential hazards likely to be present which requires the use of Personal Protective Equipment
(PPE). If the hazards are present or likely to be present, we will as far as it is reasonably practicable
remove or eliminate the hazards or exposure through engineering control. Where this is not feasible,
we will select the type of PPE that will protect the employee, require that the PPE is used by the
employee and communicate the selection decision to the employees.
The purpose of this PPE program is to protect our employees by ensuring that the workers are
trained on the use, and maintenance of the appropriate PPE. We will ensure that the PPE is provided,
used, and maintained in a sanitary and reliable condition due to the potential hazards from
workplace processes.
As part of the Health and Safety Orientation we will ensure that all employees and contractors are
initially trained in the use of the PPE relevant to their area of occupational responsibility, primary
work area and assigned task at the time of hire. Ongoing and refresher training in PPE will be made

Heavy Equipment Operator
"If you can't play the guitar and sing in Nashville, you might as well just be a construction worker"
(Patrick Carney). This quote is said by the drummer for the "The Black Keys" in reference to
someone who can't sing or play the guitar. A heavy equipment operator is a valuable asset to any
construction crew.He'll help dig the foundation, unload the truck, move earth and dig pipe lines.
These are some things a heavy equipment operator does on the job site. Being a heavy equipment
operator is an excellent job choice because it allows one to work on different equipment, earn a solid
pay, and have a good work environment. Being a heavy equipment operator allows one to work on
different types of heavy equipment. One of the many equipment they ... Show more content on
Helpwriting.net ...
Many people think construction workers don't get paid well. Well that's true if you're a unskilled
tradesman. Luckily only the skilled tradesmen are allowed to work on the heavy equipement. The
salary for a heavy equipment operator is between $28,824 and $71,124(Career overview). That
means they get paid $12.75 to $28.29 an hour(Career overview). Heavy equipment operators are
lucky they get paid vacation. They can be relaxing on a beach and still get paid. They can't do that
,it's like used for if their wife is having a child they can stay home and help take care of their wife
and kid. Like any other job they get workers comp so if they get hurt on the job. They can still get
the money they deserved while while they are recovering. Equipment operator get bonus pay once in
awhile. Whenever the boss man feels generous, it's close to a holiday or the crew has been doing a
good job. The bonus pay is between $o.oo to $2,071(Bureau of labor statistics). They also get paid
overtime. The overtime pay range is between $18.op to $39.40 an hour(Career on stop). Since there
is a pay tax some of their money is taken in out of their pay. A final benefit of being a heavy
equipment operator is there is a good work environment.Equipment operators work the regular
construction hours 6 to 5 or 8 to 6. Those are pretty long hours. Some people enjoy those hours
those hours are rugged doing some physical

Baseball Equipment History
Every sport starts with basic equipment, player, and ground rules. The most important of them all is
the equipment because without them the sports will not existence or involve being different from
other sports. The equipment should be very pacific with purpose and that is how the equipment will
transform to a better and more soothing object. It will take time, effort to make sure the object will
fit the sport, and it will not conflict with the players' performance. There are many reasons an
equipment transformed to be better like increasing players' performance, protection against injuries,
fitting into more competitive leagues, or adopting to the field sitting while playing the sport. In the
essay, I will be taking you though, the evolution ... Show more content on Helpwriting.net ...
In order to score a point a player most hit the ball to the other side and run. Having a ball in baseball
pitch is required to have a game or practice going. The baseball ball might be dangerous to players
that bat. According to article Aluminum Gets More Mettle by Iozzle stated, "Pitchers are three times
as likely to be injured by balls hit by non–BBCOR metal bats as by balls hit with wooden ones. To
meet the standard, which will go nationwide in high schools next year, companies need to make
their aluminum bats more rigid" ("Sec.") If the pitcher throws, the ball to bat that is non–BBCOR;
they are more likely to be injured by a fast bounced ball from the bat. There will be changes made to
the bat not the baseball ball because the ball is sit to be the symbol of the

Golf Equipment
CASE STUDY #4 1. What are the defining characteristics of the golf equipment industry? What is
the industry like?
Even though golf had grown to be a sizable part of the U.S. economy, the golf equipment industry
was faced with serious troubles in 2008. The convergence of a variety of serious hazards to the
industry had caused the retail value of the golf equipment industry to decline from approximately $4
billion in 2000 to about $3 billion in 2003. Golf equipment sales had rebounded to an estimated $3.8
billion in 2007, but many threats to the industry continued to exist. The number of golfers in the
United States had declined from 27.5 million in 1998 to 22.7 million in 2007. The number of rounds
of golf played in the United States ... Show more content on Helpwriting.net ...
| Ping Golf | 20 endorsement contracts with PGA Tour golfer, 12 LPGA Tour members. | Nike Golf |
17 PGA Tour members, Tiger Woods for club, shoes and apparel. |
c) Equipment manufactures have moved to competing on price due to challenges with differentiation
brought on by new USGA and R&A rules. While Callaway Golf, TaylorMade, Ping, Titleist and
Cobra Golf tightly controlled retail prices, Nike Golf is the only brand that uses different strategy
with the lowest price charge that came from an uncontrolled retail price.
The competitive force that seems to have the greatest effect on industry attractiveness is the
bargaining power of the golf's governing organizations. USGA and R&A limitation to the
innovations affects the whole industry from the technology advancement manufacturers to the
declining numbers of golfers. The restrictions to the high technology advancement of golf
equipment decline a large number of recreational golfers. The manufacturer who tried to continued
produce the equipments that against USGA's rules had face with the failure because golfers did not
dare to buy any products that against the USGA's regulations. USGA and R&A limitation to the
innovations force the overall industry and each company to find its own strategic in order to
compensate with the USGA.
The competition in the golf equipment industry is fierce among rivals in this industry. The
competition weapons that are being used are centered on the technological

Is Firefighter Equipment Safe Enough Essay
Is Firefighter Equipment Safe Enough? Firefighter equipment is constructed of some of the most
high tech material that has been created in order to keep the firefighter as safe as possible.
Constantly new items are made that are proven to be better than the last. Their equipment protects
them from a lot. They are equipped with oxygen to breathe when in a smoky building; they have
extremely large knee pads to crawl on the ground with because smoke rises so that is where the
visibility is the best; they have coats and pants to protect them from the heat and also to help prevent
them from getting cut on any sharp materials they may encounter; they have steel toed boots so if
anything drops they won't get hurt; and they have helmets to protect their heads. However, even
though it seems like everything is perfect some equipment can use some tweaking. My brother, Alex
Paris, a firefighter in Prince William County said, "I think the equipment we have today is very safe
maybe almost too safe because it is causing us to go further in the fire and not being able to feel the
heat. In the past firefighters used their ears as sensors to determine when it was too hot and time to
back out but now we have nomex hoods that prevent us from doing this." When I asked him if there
were any concerns he had with it he said, "I would like to have a facemask with increased visibility
in very smoky conditions. I would also like knee pads that are thicker and easier to move around in
because in most

Describe The Importance Of Health And Safety Equipment...
You must have adequate equipment when working in an office environment. Without these you
cannot perform an effective and productive work. Alongside computers, printers,
scanners/photocopiers, telephone/telephone headsets and office furniture, you can also find a
franking machine may be needed, office health and safety equipment and office stationery.
Stamps franking machines saves you time, create a professional image at a lower price than the
conventional postage. It prints pre–paid postage onto your envelopes and labels in–house. It can
process huge volumes of mail quickly and accurately. The franking machines have a scale to weigh
the envelope or parcel and prints the postage label. These are normally toped up with credit and
businesses ... Show more content on Helpwriting.net ...
If your employees get injured, the employer has the responsibility for making sure that they receive
immediate attention.
Therefore, office health and safety equipment has to be placed as listed: alarm and surveillance
equipment, fire extinguisher, safety procedure signs, fire warden vest, first aid kit. In the event of a
Fire, detailed procedure for the building can be found in the Kitchen. The safety signs objectives are
to reduce risks, dangerous substances are marked and gives you directions to exits.
Office stationery – one of the multitudinous types of office stationery we use is the paper. There is
different types of paper we use in a business environment. Some paper has to be compatible with the
type of printer you are using.
You could have copier and printer paper, speciality paper, coloured paper, computer paper, paper
rolls, index paper (these could be laminated). We must be aware of the impact of wasting paper as
this will not only protect the environment, it will also save money. The businesses has to ensure that
the paper they buy is used in the most appropriate way, reducing wasteful consumption and that they
use the same paper in sort of different

Evolution Of Football Equipment
Over the course of a 144–year–old game, the equipment used in the sport of football has evolved
tremendously. For my research paper, I am going to talk about the specifics of how such equipment
has evolved, why it has evolved, and how it has or hasn't benefited those participating. The most
relevant equipment evolutions that will be discussed will be the shoulder pads, face mask, mouth
guards, pants, and helmets. The one piece of equipment from that list that will be touched upon the
most will be the helmet as it brings upon the ethical concern of concussions in the game. I will talk
about how these technological advances are made to improve upon safety, but safety may just be
from the choice of the players. With regards to specific rules

Equipment Safety Essay
Introduction
Contractors are responsible for the safety of their employees and the people near or at the work
place. Part of their job is to ensure that equipment, materials, and the work environment is safe as
well as make sure that the guidelines are being followed. In a construction site, it is important to be
cautious around heavy equipment and power tools. When operating equipment while working at a
construction site, protecting your body is very necessary. Creating a good work environment is also
very important. This means all of the construction workers work together and looks out for one
another to make sure the job is done right. These topics will be further explained.
Personal protection
Eye and Face Protection
Safety glasses or ... Show more content on Helpwriting.net ...
Gloves should fit snugly.
Head Protection
Hard hats are used where there is a potential for objects falling from above and getting a bump to
the head from objects, or of accidental head contact with electrical hazards. Hard hats are replaced
after a heavy blow or electrical shock and should be maintained in good condition. Long hair should
be tied back so that it doesn 't make contact with power tools and jewellery should be removed (just
like in class).
Heavy equipment safety
Crane Safety
Cranes are mainly used for lifting heavy things and transporting them to other places. Cranes are
restricted from operating within 10 feet of any electrical power line to ovoid collision. Many crane
fatalities occur when the boom of a crane or its load line contact an overhead power line. Load
capacities, operating speed and instructions are posted and are visible to the operator of the crane for
reference. Crane machinery and also other rigging equipment are inspected daily before using it to
make sure that it is in good condition. Guardrails, hand holds and steps are provided for safe and
easy access to and from all areas of the crane. Only properly trained and qualified operators are
allowed to work with hoisting and rigging equipment.
Forklifts
Forklifts have two prongs at the front that can be slid under heavy loads and then raised up for
moving and stacking materials. Forklift truck operators are capable of operating these

A Brief Look at a Legionnaire's Equipment
A brief look at a legionnaire's equipment
Very few empires throughout history have rivaled the resplendence and sheer size of the Roman
Empire at its peak. The height of the empire was achieved in the year 117 ad with a size of 6.5
million sq. km. One of the defining factors that allowed the romans to have such successful
conquests and to maintain such a large empire is the standardization of equipment that its troops had
to abide by. The quality of the equipment was another factor that played a role in their success.
Roman weaponry
Each roman soldier was fitted with similar equipment, the primary weapon of each was their
Gladius they also had a Pugio for their spare weapon. Depending on the era they would have had 6
plumbata's clipped to the inside of their shield or Pilum on their back for throwing.
A Gladius is a short sword ranging from 50 to 60 cm long. Gladii were double edged with a sharp
point for thrusting, making them very versatile weapons. Their hilts were composed of bone or
hardwood usually and knobbed to increase the soldiers grip on the weapon. In combat soldiers
primarily used their weapons for stabbing at stomach height, but could inflict grisly injury's as a
slashing weapon as well. The Gladius was used for many years before finally being replaced
towards the end of the Roman Empire by the Spatha.
During the later years of the Roman Empire the Gladius was replaced with the Spatha. A Spatha
measured .75 to 1m long which allowed for a longer reach for the

Property, Plant, and Equipment
Property, Plant and Equipment
Property, Plant and Equipment I– Nature of Accounting Issues
Businesses purchase and use a variety of fixed assets, such as equipment, furniture, tools,
machinery, buildings, and land. These fixed assets are long–term or relatively permanent assets.
Also, they are tangible assets because they exist physically. They are owned and used by the
business and are not offered for sale as part of normal operations. Perhaps the most descriptive titles
these assets are known under are plant assets or property, plant and equipment. Depending on the
industry, the plant assets of a business can be a significant part of its total assets. That is why the
accounting for these long–term assets has important ... Show more content on Helpwriting.net ...
This basically means that IFRS is not setting certain rules to be followed and are instead giving
guidance in the form of principles.
We now want to look into the International Accounting Standards Board and framework for the
preparation and presentation of financial statements. The conceptual frameworks are split into five
categories and are in the following order: the objective of financial statements; underlying
assumptions; the qualitative characteristics that determine the usefulness of information in financial
statements; the definition, recognition, and measurement of the elements from which financial
statements are constructed; and the concepts of capital and capital maintenance (Ankarath 11). The
standards under IFRS are beginning to become much more popular across the world for several
different reasons. The International Financial Reporting Standards are currently being used by at the
very least 100 countries and "[was] expected that by 2011, more than 150 countries [would] have
adopted them" (Ankarath 1). We happen to find this important because it seems that a lot of
countries are starting to adopt IFRS to report their financial statements. One of the reasons why
many countries made the switch over to IFRS is because "the decision of the U.S. SEC to allow
foreign private issuers to list their securities on U.S.

The Growth Of Technological Equipment
Individuals around the world love the concept of innovating and creating a better world for
generations to come. Throughout history, the way of life for individuals drastically improved due to
transformative individuals. "The standard of living of the people of the United States doubled in the
first half of the twentieth century... The outstanding cause... is the growth of technological
equipment" (Ogburn 386). Businesses were and still are allowed to grow economically as a result of
the increased productivity mainly from the rapidly growing development in technology. Technology
allows individuals to achieve results in a shorter time period but more importantly, the internet
grants the power to share the information and to connect with others about one 's efforts. Because of
this, it also expands the boundless knowledge of the possible billions of people. However, to use the
given knowledge requires an extra step and some may not know which direction to take the steps in.
The current lifestyle of many individuals requires many to figure out and use information for him or
her self, which may discourage individuals from using technology. Although some individuals do
not enjoy the idea and use of technology, the internet has positive effects on society which include:
the internet increases info availability, serves as an entertainment resource, creates jobs, allows the
government to protect the people, provides better communication, and enhances business and
educational

Construction Equipment Leasing
Are you a small or medium sized construction contractor? Have you been wanting to take on larger
and more lucrative contracts, only to be thwarted by a lack of necessary equipment? It can be
frustrating when you lack the necessary resources to take on a particular contract, but this is
something that can be solved in a variety of ways. Here are some reasons why construction
equipment leasing can be right for you:
Low initial investment: With some large pieces of equipment, you could be looking at spending
several hundred thousand dollars if you decide to purchase them. If your business is still relatively
small, you may be unable to secure a loan to help you purchase additional equipment. As a result,
cash outflow in that amount could mean the difference between your business doing okay while
growing or needing to lay off people for lack of funds. With construction equipment leasing, the up
front cost will be much lower. ... Show more content on Helpwriting.net ...
However, while it may sound good in theory to offer something like third story or higher gutter
cleaning and repairs, the reality may be that nobody in your area is interested in such a thing. If you
purchased a cherry picker to help you clean and repair those gutters, you'd now be stuck with the
cost of the equipment. With construction equipment leasing of that same cherry picker, there is no
obligation to continue the lease once the initial term is up.
Always keep newer equipment: If you purchase all of your equipment, chances are that you'll be
stuck with an aging model for years until you can afford another purchase. On the other hand,
leasing construction equipment allows you to always have the latest model of equipment on hand.
You can set up your lease so that you can exchange your equipment for the latest model every year.
This can give your business a fresh and updated look, potentially attracting even more

Depreciation and New Equipment
Point of View
This case study is discussed from Paperco, Inc. point of view of whether they should avail the tax
benefits and cost savings in replacing the mechanical drying equipment.
Recommendation
Based on the analysis below in this memo, Paperco should purchase new mechanical drying
equipment now in advance in anticipation of the passage of new tax legislation. Purchasing the
equipment now maintains a positive Net Present Value for the capital project if the legislation is not
enacted, or if the new legislation is enacted and the capital project is contracted early enough so that
it is grandfathered in. With tax legislation grandfathered, the project gets the benefit of the new
lower corporate tax rate and the old ACRS ... Show more content on Helpwriting.net ...
Paperco would retain all tax credits due to the fact the machine has been in service for 84 months,
and use a 5–year ACRS depreciation model for the new equipment. This option has a positive NPV
of $2,619,745.
Option II in which the new tax proposal is enacted. The new equipment is installed in December
1986. Paperco signs a binding contract soon enough to be "grandfathered", this allows Paperco to
receive the 8% tax credit and use ACRS depreciation. At the same time, their tax rate would fall to
34%. Paperco would benefit from this more favorable "grandfathered" tax approach. Option II has a
positive NPV of $3,414,104.
Option III in which the new tax proposal is enacted and Paperco installs the new equipment in
December 1986, but they do not sign a binding contract in time to be "grandfathered" and receive
the 8% investment tax credit and use ACRS depreciation. The company will use MACRS and a
depreciation period of 7 years. The NPV of the project with this timing and structure is $3,228,044.
Without the "grandfathered" tax allowance, the new tax legislation makes the project unattractive
based on lower Net Present Value.
Calculations
Re–affirmation
There are three options available to Paperco, Inc. with respect to this capital investment:
Option I: New legislation is passed and Paperco

Equipment In Vietnam War
In the vietnam war they used heavy duty equipment like tank."M48 Patton medium tank, M551
Sheridan, Centurion main battle tank (Australia). The American used a few Sherman M4A3–M4A6
medium tanks in Vietnam (The M4 Sherman medium tank was the most common Allied tank used
in World War II.) However, by the time the Korean War had ended, the Americans had, for the most
part, replaced the Sherman with more modern tanks. The North Vietnamese Army and the Viet Cong
were supplied with Soviet tanks: the T–34/85 medium tank, which was first used during World War
II, the T–54 main battle tank and the PT–76 light amphibious tank. The Chinese supplied the North
Vietnamese with the the Type 59 main battle tank (their version of the T–54), the Type 62 light ...
Show more content on Helpwriting.net ...
Two PT–76s were destroyed by M48s. A third PT–76 exploded when it struck a mine"
(https://www.tanks.net/vietnam–war–tanks/index.html).They also used trucks like"M–151
MUTT,M422A1 MIGHTY–MITE 1/4 TON TRUCK,M718 AMBULANCE,M–38A1 JEEP,UAZ–
469,M–561 GAMA GOAT,M–35A1C DROPSIDE,M818 5 TON TROOP/CARGO TRUCK"
(http://www.militaryvehicles.com/site_pages/vietnam_war.html).In the vietnam war trucks and tanks
where a very key roll in taking over land.In the war they had to find a way to take down planes so
they made anti aircraft guns"Anti–aircraft guns and ammunition constituted the bulk of the early
Chinese and Soviet air defense assistance, a mixture of heavy (85–130mm), medium (57mm) and
light (23mm) artillery with associated search and fire–control radars. The heavy artillery would
harass the incoming flights, and the medium and light artillery would concentrate on the lead aircraft
as the American planes approached their target. Hundreds of men and women, even high school
students, entered air defense training in what the Vietnamese and their allies feared was a race
against time"(http://www.historynet.com/13703647.htm)"Throughout the Army's history, artillery,
the "King of Battle," has played an important, often decisive, role on the

Weapons and Personal Protective Equipment Essay
Weapons and Personal Protective Equipment
Debra McCain
University of Phoenix
Concepts of Physical and Personal Protection–CJA/585
Morris Cotton
January 18, 2010
Weapons and Personal Protective Equipment When protecting individuals from others that may
wish to do them harm, kidnap them, or just be near them because they think that the person he or she
is stalking is theirs in some way it is important to protect oneself first. In today's world of popularity
of movie stars and political figures it has become more increasingly important for those individuals
to hire personal protective agents. For an agent to do the best job that they can they must first protect
him or herself or he or she will not be able to protect his or her ... Show more content on
Helpwriting.net ...
This decision should also apply to the person who is under protection. Not all people that are being
protected will require the use of such drastic equipment but by using other equipment can decrease
their vulnerability.
Use of Force
The use of force has always been a questionable tactic in law enforcement and security fields.
Everyone always questions how much force is needed, was the force justifiable and could the officer
have done something differently to deter the use of force. By teaching officers and protection agents
what is the appropriate level of force and in what situations force can be stronger will help to
prevent unnecessary questioning by the public and the media. Most agencies have guidelines and
policies that outline the use of force. These guidelines describe the escalating continuum that is
appropriate for officers and agents to use.
The use of force continuum is designed into five separate levels. Level one is the simple presence of
an officer or agent. The agent is non–threatening and professional, and the mere presence of the
agent is to act as deterrence for an attacker. Level two is the verbalization level. This is when an
agent uses verbal commands such as please step back, stop, or do not move to make the individual
to stop his or her approach. This is a non–physical stage and is used to let the attacker know that
there is someone present to stop him or her if he or she continues. Level

Appropriate Personnel Protective Equipment (PPE)
Appropriate personnel protective equipment (PPE) is critical to ensure that health workers do not
contract the diseases when assisting infected patients. In order to ensure that health workers are not
infected, timely availability of high quality protective equipment cannot be over emphasized. Since
UNICEF supported the government of Sierra Leone in establishing and maintaining an
uninterrupted supply of protective clothing and accompanying technologies such as gloves, masks,
aprons, etc for the health care workforce during the EBOLA outbreaks, using new PPE. An
assessment to evaluate the effectiveness of PPE to personnel against EBOLA will be conducted. The
outcome of the assessment should include the following; 1. The number of health workers ... Show
more content on Helpwriting.net ...
Number of community health workers who were infected by EBOLA virus 4. Frequency of use of
PPE by health personnel. Based on the findings from the assessment, corrective measures can be put
in place to ensure that health workers do not contact the virus when on duty. If the number of health
workers who were competent in proper use of PPE and they used it as per manufacture's instructions
and still contracted the virus, then they may a need to asses the PPE to ensure that it is of high
quality to protect personnel from infection. This can be achieved through working with regulatory
authorities, WHO and stringent regulatory authorities to ensure that manufactures who supply PPE
are certified. Future PPE should be acquired from manufacture's whose PPE meet the required
specifications for EBOLA PPE. Since EBOLA is transmitted through blood and other body fluids,
PPE which does resistant to fluid penetration should be used in order to prevent infection of health
workers. A pool of selected certified suppliers who meet the specifications can be identified for
future outbreak response. It is important to have a pool to ensure that in case of outbreaks, the right

Personal Protective Equipment At Work Regulations 1992 (PPE)
Personal Protective Equipment at Work Regulations 1992 (PPE)
PPE stand for Personal protective equipment, this would refer to clothing, goggles, the equipment
that they would require within their environment. PPE is equipment law that will protect the workers
and customers against health or safety risks at work. I feel that this regulation is extremely important
because in the period of 1996/97 to 2002/03 1.1 million that involve PPE, this is where an
investigation has found there is a deficiency or there is a comment regarding the PPE in the report.
This regulation would require that the employer needs to provide safe equipment, within welding
and fabrication this would include: Items such as clothing, thick protective clothing because burns

Victoria Heavy Equipment Case Essay
Victoria Heavy Equipment's most recent organization has been lacking effective communication
practices amongst all of its divisions. The company has been suffering from lack of clear goals in
measurable terms, for its divisions. The idea of each division functioning as an independent unit,
whether it being cost or profit center, is a remarkable beginning. However, clear goals and key
measurable need to be set for each center, which in our case have been overlooked. As a result,
many of these centers have over spent, resulting in over expenditures, something we can definitely
not afford with anticipated slower market.
Brian Walter Jr. had a great vision of not turning into "bureaucratic, quantitatively, grey–suited
manager ...", yet the ... Show more content on Helpwriting.net ...
This clearly indicates miscommunication between R&D and Finance.
In addition, better communication was required at time of design of LTM–1000 between marketing
and ultimately our customers to first of all build what our customers wanted. Rather than creating a
monster that was assumed was what our customers would buy. Second, should there existed an
effective communication guidelines between finance, marketing and R&D at the time, we possibly
could have convinced LTM 1000's target customer to foot the bill for some of development and
prototype costs. I am quite aware that LTM 1000 was on Brian's Want–List which could not have
been disregarded but with better consultation with other departments, it could have turned into a
more sellable product rather than a successful crowd–magnet.
First step is to set, agree and emphasize on our hard goals as a team. These goals are not expected to
be too different form the ones set by Brian for V.H.E. After that, each division is expected to present
their SWOT or a similar analysis for their individual center. Once these tasks have been completed,
each individual center manager and I can set and agree on hard goals for that division along with a
specific strategy to reach those goals. For example, the goal of reducing waste, including, high level
inventory will be on the hard goals list for all profit centers. Profit sharing plan will be re–written to
reward

Scott Equipment Organization
Scott Equipment Organization
Jaime Grettenberg
FIN 419
February 25, 2013
Kristine Donnelly
Scott Equipment Organization Many businesses use debt financing to achieve their financial goals.
Debt financing is raising operating capital by borrowing. Scott Equipment Organization is
investigating various combinations of short–term and long–term debt financing in financing their
assets. Short–term debt financing has a maturity of one year or less; whereas, long–term debt
financing has a maturity of more than one year. Short–term debt is usually used to increase the
amount of available working capital that can assist the company with its day–to–day operations,
such as purchasing a required piece of equipment or to pay suppliers. ... Show more content on
Helpwriting.net ...
For Scott Equipment to continue trading, they have to be in a position to meet their immediate
obligations.
Current Ratio Current ratio is type of liquidity ratio. It is a financial tool used to measure a
company's ability to pay off its short–term debts with its short–term assets. A company's current
ratio is expressed by dividing its current assets by its current liabilities. A higher current ratio means
the company is more capable of paying off its debts. If the current ratio is under one, this suggests
the company is unable to pay off its obligations if they were due at that point (Investopedia, 2013).
Companies that have trouble collecting money for its receivables or have long inventory turnovers
can run into liquidity problems because they are unable to lessen their obligations.
In Scott Equipment's case all three financial policies show the company to be in good financial
health. Aggressive, moderate, and conservative show a current ratio of higher than one. However,
the conservative policy is the highest ratio meaning that the conservative approach has the most
liquidity and the greatest ability of paying off its short–term debts with its short–term assets.
Profitability VS Risk Risk is defined as the probability that a company will become insolvent and
will not be able to meet its obligations when they become due for payment. The profitability versus

Manufacturer of Ball Sports Equipment
Manufacturer of ball sports
How is Wilson's tennis racket different from other company's tennis racket? Wilson's tennis racket
differs from other company's tennis racket in the sense that no other company has been as influential
and intimately involved in the shaping the game of tennis (Wilson.com). Wilson is the true
American icon in the world of sports equipment (Wilson.com). Wilson has grown to be the world's
leading manufacturer of ball sports equipment, but originally their company started in 1915 by
Thomas E. Wilson. Wilson & Co. was originally named Thomas E. Wilson Company named after
the president of the company Thomas E. Wilson. The name was changed to Wilson & Co. after
Thomas E. Wilson left the company (Wikipeadia.com). The first tennis racket produced by Wilson
was produced in 1949 (tennisracketsuk.com). It was made out of laminated wood, with heads of
around 65 inch sq. In 1960s, Wilson produced the T2000 which was made out of steel that featured a
wire wound around the frame to make string loops (tennisracketsuk.com). In 1975 aluminum tennis
racket were introduced. This material was lighter than steel and allowed the construction of the
oversized tennis rackets. This racket made the tennis player hit with more spin or slice on the ball
with their 100+ in sq head sizes (tennisracketsuk.com). 1980's was the introduction to the first
graphite tennis rackets. Graphite tennis racket turnout to be lighter and stiffer that allowed player

Equipment Depreciation
Purchasing equipment is one of the biggest expenses that small businesses and start–ups face. The
IRS allows you deduct most or all of these expenses. This in turn helps you recoup the cost
associated with running your business. Moreover, by taking this deduction when you prepare your
tax return, it lowers your overall tax bill. In some cases, especially for small businesses, the
deductions could result in a refund.
There are different ways to expense business equipment when filing taxes, which can often lead to
confusion. If you're unsure how the deductions will affect your business, hiring a tax accountant is a
good idea. Mistakes or miscalculations when filing your tax return could trigger an IRS audit. A
professional can lessen the stress and time constraints during the tax preparation season.
Types of Equipment Your Can Expense
Business equipment is ... Show more content on Helpwriting.net ...
For instance, furniture, office equipment, vehicles, computers, business software, and machinery
would all fall under equipment depreciation. These tangible items for your business are considered
capital assets since they are used to make a profit.
Understanding Section 179 Deduction
Under Section 179, the IRS allows you to deduct the full price of the equipment you purchased or
leased during the year. By taking this deduction, you are essentially deducting the full cost of the
equipment from your company's gross income.
Your company must have a taxable income before you can use the 179 deduction. Additionally,
there is a cap on the deduction set at $500,000 that you can claim. There is also a maximum of
$2,010,000 for business equipment expenses during the year that Section 179 is claimed. Most small
business will not spend this amount on equipment during the early years of being in business, which
is why this deduction is so valuable.
Section 179

Chouinard Equipment Case Study
Chouinard Equipment, an outdoor gear and climbing equipment company, was founded by Yvon
Chouinard, a mountaineer that went into the business of running stores not necessarily for profit but
for the environment (Cortina, 2017). The Patagonia labeled was first created in 1973 (Cortina,
2017). Patagonia committed to donating to environmental groups. Since 1985, the company has
made $79 million (Cortina, 2017). The values of Patagonia's brand are to tell people what the
company stands for. The elements of the Patagonia's environmental philosophy are to: lead an
examined life, clean up the environment through environmental assessment program, do the penance
of the organization, support civil democracy, do good and to influence other companies. Chouinard
business was like no other business. The culture of this organization is built for the people of the
organization. The culture of the organization encourages employees to enjoy life, if employees can
maintain a suitable atmosphere. This company allows employees to be individuals without strict
stipulations. Patagonia's business incentive makes sure employees have time to pursue sports and try
out new gear (Farrell, Hirts &Farrell, 2009). The organization also offers free yoga, organic café,
free scooters and skateboards and hiking trails (Schulte, 2014). Because of the great incentives,
turnover at Chouinard is minimal and employees are loyal to this organization (Schulte, 2014).
Patagonia pampers its works while making a profit. This organization is not built upon values that
devalue associates or deprive associates of personal life. Associates are allowed to do the things that
are loved while making a difference in the environment. This is an organization that puts family in
its priorities and is one of the first companies in America to offer on–site child care (Schulte, 2014).
By doing so the organizations is doing something for employees that is accessible for families. Child
care today is so expensive and it also time consuming for many. On a daily basis, trying to get kids
to and from daycare requires too much time. This company has an on–site child development center
which allows parents to bring children to work hassle free. The company also offers

Mountain Equipment Co-Op
The following report documents 5 different areas of focus pertaining to the following company
"Mountain Equipment Co–op", Please enjoy...
Marketing Management Orientation:
The Societal Marketing concept is the orientation best exemplified by Mountain Equipment Co–Op
(MEC). This is evident in the following ways: The company's mission statement clearly outlines that
passion is what drives their company, even over profit. The passion to continue to look for ways to
protect our wild spaces and reduce the ecological footprint of their business. MEC separates itself
from other outdoor retailers through its eco–friendly product line and superior focus on corporate
social responsibility. They urge society to count on them to act with integrity ... Show more content
on Helpwriting.net ...
The monetary fee is just clever business practice, the real idea behind this is to let the "potential
market" know that MEC truly values your business and would like you to become apart of our
business structure going forward. Lastly, Mountain Equipment Co–op has undertaken many
business initiatives to solidify customer loyalty from top to bottom of the organization. Back in
1997, they introduced a free of charge online gear swap where members could recycle used outdoor
gear. In 2007, MEC opened the first accredited "Green" LEED(The Leadership in Energy and
Environmental Design) distribution center in Surrey, British Columba. LEED encourages and
accelerates global adoption of sustainable green building and development practices. In 2008, MEC
developed and launched a series of annual national paddling and biking expositions. Its been clearly
defined that MEC takes a very "Green" approach when it comes to business, this is something that
directly plays into that target market. A self–propelled wilderness–oriented recreation goer would
certainly buy into such strong values and ultimately stick by that company.
Segmentation Variables:
One of Mountain Equipment Co–op's key main marketing strategies is one of product leadership
through supporting price, promotion and distribution strategies. This allows them to gain loyalty
from their customer's year after year. MEC is a retail co–operative owned by those who shop at their
stores.

Emergency Equipment Log
This coaching and counselling is initiated to identify less than acceptable work performance in the
following areas: Checking of emergency equipment logs. Charge nurse duties emphasize the
importance of ensuring proper operation of emergency equipment daily with verification of
operability via signature on emergency equipment logs. This has been neglected Refrigerator logs
have been neglected and not routinely checked per policy requirement. M300s are not filled out
properly, frequently they are illegible, and the M.D. is often not notified as required. Failure to
properly complete these forms causes a delay in handoff of such paperwork to the administrative
departments who need this information. Failure to provide interdisciplinary ... Show more content
on Helpwriting.net ...
When informed that the M300s needed to be corrected, you stated, "I have been doing them as early
as the dinosaurs and the Flintstones." Further, "this has not been a problem before." It is important to
note that although things may have been done one way, progress and growth hinges on receptivity to
change. Also, overtime hours have been addressed to convey that overtime hours worked must
reflect the accomplishment of tasks. Fiscal responsibility is expected and demanded, and overtime
hours cannot be arbitrarily consumed to make up for the time that should have been spent during the
shift. All overtime hours must be approved by the Nurse Manager beforehand. Overtime will be
approved as long as the work is complete and commensurate with the time spent to accomplish the
task. Accordingly, work should be coordinated to accomplish as much as possible during shift hours.
This coaching/counseling is to provide the opportunity to improve and correct the aforementioned
discrepancies. As a team, we want to avoid punitive censorship by governing entities. As a team, it
is imperative that we avoid punitive censorship by governing entities such as JCAHO, DHEC, and

The Safety Of Military Equipment
Aircraft Loadmaster Many people wonder how military vehicles,cargo, people, and other military
equipment ever made it from one place to another without being seen and how this action is pulled
off so smoothly. If people only knew more about the military, they would be wonderless. The
transporting of military equipment is so unique and detailing that if you're not precise even the
smallest mistake can ruin the entire operation. The loading of the planes are varied depending on the
cargo, but wait a second who loads the planes? This is the job of an Aircraft Loadmaster. They
perform multiple procedures which ensure that the planes are loaded properly so that the passengers
make it to their destination safely, develop a positive outcome from loading an aircraft by taking the
procedures extremely cautiously, and making history. Procedures such as recording the weight of
cargo, determines the amount of cargo and passengers or troops to be loaded and proper placement
in aircraft and computes load and cargo distribution are few of the many essentials of being Air
Loadmaster. First off by pursuing this career you would need a minimum of a high school diploma
or a GED with 15 college credits and an ASVAB score of at the minimum 36 point to the 99 point
test. The ASVAB stands for "Armed Services Vocational Aptitude Battery." Its a multiple choice
question test given by the United States Military Entrance Processing Command used to determine
if an individual is qualified to attend

Describe The Importance Of The Equipment When Working In...
When working in a salon it is important for you to take responsibility in the way you behave in
maintaining a healthy and safe environment, in order for this to be achieved I would ensure that
when moving around in the salon I not run or rush but walk so this reduces the risk of me falling or
slipping and injuring myself but also I will not be putting others at risk of harm or injury. I would
ensure that I am confident to use the equipment correctly and ensure that all the relevant checks
have been carried out to ensure it is safe to use on clients. Before using any products I will be
looking at the manufacturers'

Biomedical Equipment Specialists
A Biomedical Equipment Specialist is someone who is responsible for servicing and maintaining the
medical equipment. Biomedical Equipment Specialist has a huge responsibility to keep up with all
medical equipment in hospitals, clinics, and other facilities. Their duties for their job have many
responsibilities. Their responsibilities are important to the patients. Some medical equipment help
keep patients alive or to monitor them. Biomedical Equipment Specialist are highly skilled and
provide a duty that helps ensure that medical equipment is fully functional, and safe.
There are requirements for a Biomedical Equipment Specialist in the military is listed as a Medical
Equipment Repairer. The training that is required is ten weeks of basic combat training and forty one
weeks of advanced individual training. This training also includes a practice test in repairing and
replacing equipment parts. Part of that time is spent in the classroom and the other part is in the
field. To qualify for the advanced individual training, the applicant must pass the ASVAB test with a
107 in aptitude area EL. The applicant must also have a normal color vision as well. These
applicants must be able to install, inspect, maintain, calibrate, repair, modify, and even design
biomedical equipment and support systems to make sure they adhere to stringent medical standard
guidelines. Biomedical Equipment Technicians also educate and advise staff on basic physiological
principles, theory of operation,

The Components Of The Right Equipment
right equipment is one thing but also having the correct substances is vital. As in manufacturing
most of the equipment are mechanical controlled systems, alongside with electronics they 'll consist
of actuators, mechanisms, motors, valves and other mechanical parts . So essential substances can be
lubrication to ensure seamless and flawless functionality to coating the equipment to avoid rust or
corrosions depending on what products are being produced.
Transportation: Transportation is essential. 8/10 cases raw materials, essential ingredients, and many
useful items are procured from other facilities, transportation is vital. From the costs for rent or
ownership of the vehicles to the fuel maintenance of them also.
Research and ... Show more content on Helpwriting.net ...
Uncertainty in Manufacturing:
What does this mean? Uncertainty in manufacturing is when the fate of a company or a product is
not certain. This can be due to the reputation the company has or the product produced has failed to
gain popularity. Quality of the product is vital, consumers expect to buy products with the intention
that it will be reliable. For an example the games console Atari Jaguar which was released in the
early 1990 's. Featuring a 64 bit system it was very powerful for its time, and was significantly
cheaper then rivals. So to the average person you 'd think this would have been a huge success.
However in the marketing campaigns the slogan "Do The Maths" was used as a sales tactic,
unfortunately this lead to potential customers being made redundant, this was seen as a cheeky ploy
on Atari 's part. The design was not ergonomic, the control pad was simply too big and consisted of
loads of buttons which rendered the feel of the pad uncomfortable. Furthermore a very small
selections of game were made to run on Atari 's firmware, the console also didn 't have a great
software to run in the first place. Unfortunately the console was a failure and also led to Atari 's
demise. So by looking at that example, that was believed to be a huge success but since little

Golf Equipment
CASE STUDY #4 1. What are the defining characteristics of the golf equipment industry? What is
the industry like? Even though golf had grown to be a sizable part of the U.S. economy, the golf
equipment industry was faced with serious troubles in 2008. The convergence of a variety of serious
hazards to the industry had caused the retail value of the golf equipment industry to decline from
approximately $4 billion in 2000 to about $3 billion in 2003. Golf equipment sales had rebounded to
an estimated $3.8 billion in 2007, but many threats to the industry continued to exist. The number of
golfers in the United States had declined from 27.5 million in 1998 to 22.7 million in 2007. The
number of rounds of golf played in the United States ... Show more content on Helpwriting.net ...
The USGA and R&A have announced the limitation on many aspects even though there is little
evidences that technological advance of golf equipment will lower the score. The regulations that
enforce rules on club head size and performance also increase the profitability to shaft
manufacturers. The USGA allowed interchangeable shaft which mean that golfers can install
different shafts into the driver head to have different launch characteristics. So the differentiation of
golf club changes toward the compatibility with shafts. The skilled core golfers might have strong
preference for a particular shaft and select golf club based on which club is compatible with their
preferred shaft. The introduction of new regulation will also have an effect on the industry
competition as the competition will shift from technological capabilities to price competition and
endorsement contracts. b) The number of Golf players and their frequency of playing The trends of
golf playing are going down because of many factors or reason, the several reasons are: * Difficulty
of the game which disappointed the existing players and make them quit playing * Lack of free time
the play and practice from many reasons * Health concern and injury from playing * High playing
fee These factors are accountable for the declining trends of golf industry and will reduce

Earth Moving Equipment
Introduction
Earth moving equipment are the machines human make to replace the hard work from the human;
the machines made by humans to perform digging; grading; leveling; removing; etc to earth moving
from one side to the other side. There is Bulldozer, excavator, grader, loader, roller, forklift, tractor,
bobcat, and truck, etc.
Earth moving equipment is replacing the hard tough work; back break jobs to easy jobs for the
workers. Machines do a lot better than the human force. They can do a big job in the short time. So
the time can be save and finish the job earlier, leading to the economic affect. They run by the power
machines, so they do not need a lot of people in the same task. Most of the equipment can be used at
any time, ... Show more content on Helpwriting.net ...
The special task of this machine is digging.
In the early age when the human tools are just the picks, shovels. With the basic tools, men must
work very hard to tackle the job. Now the machines are in place after time to time to refine, the
excavator 322B appears to help. This unit is used to replace the manpower by machine, with the
circle rate very fast; it can do the job better on the field. It can dig or pick up a huge amount of dirt
and ship it aside. It can break the rock to the small pieces to level the surface in a limit time. The
machine can handle a job equal to 200–man power in daily work.
This machine was built to counteract the need of huge digging job around the field. It operates with
the other earth moving machines such as dump truck, loader, etc
We can see this machines every where: around the field, in the habour, in city, on the side of the
road. Perhaps it is busy digging sand, breaking down rock, digging the drain lines, and lifting a
piece of concrete. Really, it is a great machine.
The machine is run by tracks. The speed is up to 5.5 km/hr. The huge arm attaches to the body of the
unit. With the hydraulic system, the arm can stretch out, fold in, lift high in the sky, and dig deep
into the surface of the earth. With the special basket located on the tip of the arm, it can dig deep
into the ground, pick up soil then swing around to unload to the truck located

Occupational Safety and Health and Safety Control Equipment
QCF641 | Conforming to General Health, Safety and Welfare in the Workplace | 1.4 | State why and
when health and safety control equipment, identified by the principles of protection, should be used
relating to types, purpose and limitations of each type, the work situation, occupational use and the
general work environment, in relation to:– collective protective measures– personal protective
equipment (PPE)– respiratory protective equipment (RPE)– local exhaust ventilation (LEV). | 1.5 |
State how the health and safety control equipment relevant to the work should be used in accordance
with the given instructions. | 1.6 | State which types of health, safety and welfare legislation, notices
and warning signs are relevant to ... Show more content on Helpwriting.net ...
| 4.6 | Describe how to apply principles of equality and diversity when communicating and working
with others. |
QCF643 | Moving, Handling and Storing Resources in the Workplace | 1.3 | Describe the different
types of technical, product and regulatory information, their source and how they are interpreted. |
1.4 | State the organisational procedures developed to report and rectify inappropriate information
and unsuitable resources and how they are implemented. | 1.5 | Describe how to obtain information
relating to using and storing lifting aids and equipment. | 2.1 | Describe their responsibilities under
current legislation and official guidance whilst working:– in the workplace, in confined spaces,
below ground level, at height, with tools and equipment, with materials and substances, with
movement/storage of materials and by manual handling and mechanical lifting. | 2.2 | Describe the
organisational security procedures for tools, equipment and personal belongings in relation to site,
workplace, company and operative. | 2.3 | Explain what the accident reporting procedures are and
who is responsible for making the reports. | 2.4 | State the appropriate types of fire extinguishers
relevant to the work.QCF641. 3.7 | 2.5 | Describe how and when the different types of fire
extinguishers, relevant to the given occupation, are used in accordance with legislation and official
guidance.QCF641. 3.7 & 3.8 | 3.4 |

Use Office Equipment

Recommended

Recommended

More Related Content

Similar to Use Office Equipment

Similar to Use Office Equipment (20)

More from Brenda Thomas

More from Brenda Thomas (20)

Recently uploaded

Recently uploaded (20)

Use Office Equipment