Shuzworld Workflow and Cost Analysis

Shuzworld Analysis
Shuzworld Analysis: Workflow, Cost, Staffing
JGT2 Decision Analysis, Task 1
Introduction: Shuzworld is a national retailer based in Omaha, Nebraska that focuses on selling
shoes, boots, and sandals. In addition, the company produces its own line of products that include
work boots, sandals, rubber boots, and rainwear; along with sport and adventure footwear
(MindEdge, 2014). The purpose of this report is to provide recommendations based on several
analyses involving the company's workflow, costs associated with a new product line, and the
staffing plan at the Shanghai plant. A. Workflow: Shuzworld produces Rugged Wear Work Boots at
its Shanghai production facility using an 8–step process and an assembly line of 8 ... Show more
content on Helpwriting.net ...
Another benefit to increased communication between workers is increased job satisfaction and
productivity (Heizer, 2011). A1. Justification: The streamlined, 5–workstation production line layout
was selected bases on an analysis of Shuzworld's assembly line data at its Shanghai production
facility. The 5–workstation assembly line was achieved by using the assembly line balancing tool,
which is designed to minimize the imbalance between machines and/or personnel while meeting the
amount of output required. Using the data from the assembly schedule provided by the Shanghai
production facility, the cycle time (takt time) and the minimum number of workstations was
calculated in preparation for using the assembly line balancing tool. The cycle time indicates how
often a unit needs to be completed in order to reach the target goal by dividing the number of
available minutes per day by the number of units required. The assembly line operates 40–hours a
week and is budgeted to produce 6 work boots an hour. So the cycle time is calculated as follows:
Production time available per day: = (40 hours / 5 days) x 60 minutes per day = (40 / 5) x 60 = 8 x
60 = 480 minutes Units required per day: = 6 work boots an hour x 8 hours a day = 6 x 8 = 48 work
boots Cycle time = Production time available per day / Units required per day = 480 minutes / 48
work boots = 480 /
... Get more on HelpWriting.net ...

Essay On Object Oriented Approach
LESSON 1: FUNDAMENTAL OF OBJECT–ORIENTED PROGRAMMING LEARNING
OBJECTIVES AND OUTCOMES Introduction to object– oriented approach Basic concepts of
object–oriented programming Benefits of OOP Applications of OOP How java differs from C and
C++ Java character set Keywords, identifiers, literals, operators, separators INTRODUCTION
Object–oriented approach was developed in late 1950's in MIT to overcome the drawbacks of
procedural– oriented approach. Ii is commonly known as OOPS. Now, it has become most preferred
programming approach by software engineers to solve real world complex problems. The traditional
procedural languages solve problems in terms of the structure of the computer i.e. memory bits and
bytes, array, decision, loop rather than thinking in terms of the problem which is to be solved. Some
of the noticeable drawbacks of traditional procedural–oriented programming languages such as C,
Fortran, Cobol and Pascal are: Procedural–oriented programs are designed by functions which are
less reusable and not well encapsulated. Global variables and other functions are also need to be
referenced while using same function for other program. This makes reusability of functions very
difficult in procedural– oriented programming. Procedural languages are not suitable of high–level
abstraction for solving real life problems. Traditional procedural–languages separate the data
structures and algorithms of the software entities. To overcome these problems

Object Oriented Programming Essay
Designing a Class Tutorial for C++ OOP (Object Oriented Programming) The modern programming
is based on the concept that "program little and use more". The object oriented programming
languages are playing a vital role in the industry of development. The OOP introduced following
concepts: Split a program into set of tasks and sub–tasks Develop functions for these tasks And
reuse these functions with little or less modifications This lead a new term "Reusability", which
means that you have to write a function once and use the function again and again by calling the
Object of that Class in which the function is present. You can also further implement the Class by
adopting the rules provided by OOP. C++ is a good example of object oriented programming.
Features of OOP There are many features of OOP, but the most common features are: Encapsulation
Inheritance Polymorphism Abstraction Contracts Class The class is capsule that is used to
encapsulate an abstract data type. When you define a class, you define a blueprint for a data type.
The class itself does not defines data, its only gives the name concerning with the objects. However
a class contains one or more than one objects. These objects are the operations which a class
performs. In short, a class provides blueprints of objects. The basic syntax for a class is: Objects
Objects are the actual operations and functions that a class performs. Each object has its own
characteristics/properties/attributes and

The Differences And Similarities Between C + And Java
C++ and Java came into view to be exceptionally almost identical programming languages. While
there is a lot of usual syntax allocation between the two languages, there are also some very
considerable unusual features in both programming languages. Martin (1997) states C++ and Java
programming languages differ allot in many aspects and features. More specifically, this is to aware
especially to amateurs who would use this specific programming languages their main differences
and functions. There is a variance between C++ and Java programming languages in terms of
multiple inheritance, class types and array declaration. C++ is a very fast and well built language.
The focus of this language is, building code that will run on a specific machine ... Show more
content on Helpwriting.net ...
C++ work exceedingly well for a system with limited hardware capabilities where the programmer
needs precise control over how the system will work and raw speed is of the utmost performance.
This could be very critical for some networking applications, especially in embedded systems or
other very distinct uses. First, multiple inheritance is an important feature in C++ and programmers
believe that it is a very good structuring tool. To acquire directly from more than one class is usually
called multiple inheritance. Using this method for programmers would be a trial because failure to
use this method correctly will cause errors in coding a certain program. Next, Java supports classes,
but does not support structures or unions. All classes in Java ultimately inherit from the object class.
This is significantly different from C++ where it is possible to create inheritance trees that are
completely unrelated to one another. Lastly, defining an array is needed in C++ but not in case of
Java at the time of array declaration, when declaring an array in C++. Declaration of arrays in
programming is a prime factor where programmers must be accurate and specific on building their
codes and so that executing their codes will not be a big deal for a program to

Java As A Programming Language
Java : Introduction Java as a programming language is one that was designed in a time when the
distribution of information was rapidly increasing. Its original purpose was to be used in a home
entertainment controller for the television, however it was much too advanced for the industry (The
History of Java Technology), and so java moved on to a much more capable, and growing internet.
Java's uses aren't just restricted to the internet though, Java is/was produced to be easily distributed
and implemented among many platforms. Java was produced with a set of goals in mind. One of its
most noteworthy and successful goals was to be portable/ cross platform. Java owes a good amount
of its success to its object oriented core, as well as being built upon its familiarity with the c
languages among other things. Java like all programming languages are judged based on their
writability, readability, reliability and overall cost. Literature Review Java is an all–around language
with it being one of the most used language of 2014 (TIOBE Software: The Coding Standards
Company) it was even used in Google's android operating system (Rosenblatt, Seth) which is home
to 84% of the mobile operating system market share (IDC: Smartphone OS Market Share). Java has
the flexibility to be used in all fields; cross platform and able to be ported over to other systems. As I
mentioned earlier Java was originally made for a television remote and evolved from that point, Java
had evolved

Escalations: A Case Study
Escalations: a) Time lines for emptying procedure of U–bill and US pouches from CDP to meet
R&D timelines (it is not consistent between time frame that impact R&D timelines) b) Follow
designated location to return the empty pouches, departmental bags and Main branch bags. (CDP
operators not showing any attempt to return the content to R&D as a part of their responsibility). c)
Prep operators and R&D operators should be treated as per CIBC values. (When prep operator
receives any pouch/departmental bag with red ties, prep operator call R&D operator to cut the ties
for them.) d) E–sat issue. Suggestion: a) CDP management required to certain timelines for prep
operators to return the empty pouches to marshalling except bags received as late.

What Is Unobservable?
knowledge of it.[11] The things or facts of world A have properties and may interact, but those
properties and interactions are by definition unobservable. Because they cannot be observed and are
given to us only in thought, the facts in A were called by Kant noumena, or things–in– themselves
(Ding an sich). The view that there exists such an unobservable yet real world is called metaphysical
realism.[11] The belief that no such world exists, or is at least meaningless because unobservable, is
called anti–realism.[11] The present work assumes the existence a real, external world. The problem
of establishing its existence and its properties is known as the problem of the external world.[12]
Area B, conjoined with A at interface 1, is the empirical world, also known as the world of
appearance. It is a fabricated world, made up of machine–derived images or representations of the
facts of external world A. These representations in B are observable and knowable. They are
manifest to the senses, but may or ... Show more content on Helpwriting.net ...
Our aim in doing so was to define the structure and lawful behavior of the material world by
imposing upon it boundary conditions. Nevertheless, having combined the two theories, we find that
what we have achieved thus far is not a theory of physics but a merely a theory of how one acquires
knowledge of the physical world by successive representations, a machine–made representation at
interface 1 and a mental one at interface 2. We set out to produce an objective description of the
behavior of the facts of the physical world, but instead all we have got so far is a model of how
those facts are transformed into subjective mental images. As such our model is as much
epistemological as it is metaphysical. Clearly work remains if we are to achieve our objective of
revealing the source of physical law. To meet our objective,

History of C Essay
History of: Origins and Examples
Essay written by DaMonMayers
Origins of C
What are C and OOP?
C is an advanced, high–level programming language ("Computer languages") that is used to develop
powerful applications for Microsoft® Windows®, many Linux environments, and other well–
known and widely used operating systems. C is quickly becoming the standard language for
commercial software development (Oualline).
OOP, an abbreviation for object–oriented programming is simply code that "attempts to place a new
layer of abstraction between the programmer and the data he is working with ... this layer will help
the programmer develop better code more quickly than he could do before." (McHale). OOP
languages must include four ... Show more content on Helpwriting.net ...
The first implementation arose in 1958 and quickly became the standard for expressing algorithms.
Algol was most widely used in the academic community, which thusly led to its widespread usage.
P: begin integer h, i; real array A[1:5], B[1:5, 1:2]; for i := 1 step 1 until 5 do
A[I] := 6 – i; h := 1
Loop: if h *= 5 then begin B[h,1] := 1;
B[h,2] := 5 + 3 * (h – A[h]); h := h + 1; go to Loop end end P
(Parsons)
The similarity between such modern languages as Pascal and Modula–2 and Algol proves it
influential to the programming community, even today. Algol also introduced the concept of "free–
format," a concept that allows programmers to arrange the code any way they want (assuming the
syntax is correct) (Parsons). This concept proves itself useful today in making source code easier to
read and eliminating the problem of "spaghetti code" (code written in an unreadable fashion, or
strung together as spaghetti is).
Simula67
Simula67 was developed by the Norwegian armed forces (Kristen Nygaard and Ole–Johan Dahl at
the Norwegian Computer Center) and was the first of its kind to use classes (as class is defined by "a
program unit containing both data and associated functions") (Overland, 3). Its development was
initiated between 1961 and 1967. SIMULA I, appearing first in 1964, was designed as a system

The Effect Of Angular Momentum On Classical Mechanics
INTRODUCTION
We know the importance of Angular Momentum in Classical Mechanics; the total angular
momentum of an isolated physical system is a constant of the motion. For example, if a point
particle P, of mass m, is moving in a central potential (one which depends only on the distance
between P and a fixed point O), the force to which P is subjected is always directed towards O. Its
moment with respect to O is consequently zero, and the angular momentum theorem implies that
derivative of L (Angular momentum of P with respect to O) with respect to time is zero.
This fact has important consequences: the motion of the particle P is limited to a fixed plane (the
plane passing through O and perpendicular to the angular momentum L); moreover, this motion
obeys the law of constant areal velocity (Kepler's Second Law).
All these properties have their equivalents in Quantum Mechanics. With the angular momentum L of
a classical system is associated with an observable L, actually a set of three observables, Lx, Ly, and
Lz, which correspond to the three components of L in a Cartesian Frame. These three observables
commute with the Hamiltonian H for a particle in the central potential V(r). This property simplifies
the determination and classification of eigenstates of H.
Quantization of Angular Momentum: the component, along a fixed axis, of the intrinsic angular
momenta are quantized, which enables us to understand atomic magnetism, the Zeeman Effect, etc.
We shall denote by

Decision Analysis Task 1
JGT2 Decision Analysis
Task 1
A.) Recommendation on how to improve current workflow.
It is my recommendation that Shuzworld change their facilities layout to create a better workflow.
You can accomplish this by breaking the current structure and reorganizing the workstations to
accomplish tasks in a more time efficient manner and maximizing an employees' time spent on the
product. Utilizing the Case Study we can surmise that each eight hour shift must produce forty–eight
work boots. 8 hours times 60 minutes equals 480 minutes. 480 minutes (The Work Shift) divided by
48 (the number of work boots required) equals 10. One work boot must be completed in 10 minutes
to meet production goals. Let's take a look at the steps involved ... Show more content on
Helpwriting.net ...
The company can make a determination using this information to price the sandals competitively
while providing the largest profit margin. The learning curve can be used and is based on the
assumption that as people continue to perform a task that will become more proficient at it and will
become more efficient as well. The coefficient approach of analyzing this learning curve seemed to
be the best option in this scenario. You can use a simple formula to calculate the hours needed for
each grouping my multiplying the required time of the first grouping by the coefficient of the
grouping you are trying to discover. This tool provided the most simple means to discover the
required hours of each grouping.
C. Staffing Plan Recommendations The assignment method was used in determining ways that the
schedule can be change to maximize production while reducing idle time, completion time, and
potentially labor costs. Using the information that was provided, Operator A will cost $10.00 for the
first job, $11.00 for the second, $9.00 for the third, and $10.00 for the fourth. Operator B will cost
$12.00 for the first job, $9.00 for the second job, $8.00 for the third, and $8.00 for the fourth.
Operator C similarly will cost $11.00 for the first, $11.00 for the second, $11.00 for the third, and
$9.00 for the fourth. Last, Operator D will cost $11.00 for the first, $11.00 for the second, $9.00 for
the third, and $10.00 for the fourth. While

ECT114 Week3 Homework Essay
ading Summary
These are the automatically computed results of your exam. Grades for essay questions, and
comments from your instructor, are in the "Details" section below.
Date Taken:
7/24/2014
Time Spent:
5 h , 44 min , 39 secs
Points Received:
20 / 26 (76.9%)
Number of Attempts:
0
Question Type:
# Of Questions:
# Correct:
Multiple Choice
15
12
Matching
1
1
Grade Details – All Questions
Question 1.
Question :
(TCO 3) Determine the Boolean expression at TP1 with respect to the corresponding inputs.
Student Answer:
Instructor Explanation:
TP1 is the output of an OR gate. The Boolean operator for the OR gate is + and the inputs are A and
B. Refer to Chapter 3 of the textbook for more information.
Points ... Show more content on Helpwriting.net ...

Points Received:
2 of 2 Comments:
Question 10.
Question :
(TCO 3) Determine the correct output waveform for the circuit below.
Student Answer:
YOptionA
YOptionB
YOptionC
YOptionD Instructor Explanation:
Y should be HIGH (when A = 0 AND B = 1) OR (when C NAND = 1). YOptionD is the only
waveform that meets those criteria.
Points Received:
2 of 2 Comments:
Question 11.
Question :
Student Answer:
TP1 is the output of an XOR gate. The Boolean operator for the AND gate is  and the inputs are A
and B. Refer to Chapter 3 of the textbook for more information.
Points Received:
1 of 1 Comments:
Question 12.
Question :
Student Answer:
TP2 is the output of an XNOR gate. The Boolean operator for the XNOR gate is , the XNOR gate
requires an inversion bar over the entire expression, and the inputs are C and. Refer to Chapter 3 of
the textbook for more information.

Points Received:
1 of 1 Comments:
Question 13.
Question :
(TCO 3) Determine the VHDL assignment statement at X with respect to the inputs.
Student Answer:
X <= (A XOR B) OR NOT (NOT B OR C);
X <= (A XOR B) OR (NOT B NOR C);
X <= (A XOR B OR NOT B OR

A Note On The And Refinements
A. Aggregations and Refinements:
Let us analyze the case when the Roll–up procedure encounters a 0:n association Ti –> Ti+1
(Algorithm 2). To generate a virtual attribute vi, the Roll–up procedure applies 1) an aggregation
operator Agg to an attribute aj and 2) a refinement operator Ref for the comparison of any attribute
ak to a quantity c. Aggregation operators summarize the information contained in Ti+1, while the
refinement operator is a filter on the rows used for the aggregation. The roles of Agg and Ref
executed in lines:11–14 of Algorithm 2 can be clarified in terms of the following SQL query
Select T1.pk, Agg(T2.aj) From T1
Join T2 on T1.pk = T2.fk
Where T2.ak Ref c
Group by T1.pk
For e.g., Ti is Customer, Ti+1 is Purchase Pur, aj = Pur.return, ak = Pur.online, Agg = AVG, Ref =
EQUALS, and c = 1, the query builds a virtual attribute vi equal to the proportion of returned online
purchases (vi = AVG(Pur.return) WHERE Pur.online = 1) made by the same customer. Note that this
attribute is a class spoiler, because it uses information on future returns. To avoid this problem, the
average needs to be computed on prior purchases. Since n:n associations are not allowed, each
record in table Ti+1 is used to build the virtual attribute of exactly one record in each preceding
table. Thus, before the Roll–up procedure starts, it is possible to add a virtual attribute curDate to
each table in the path, which is the threshold to use (in our case, it is the value of T0.date).

Tour Operator
Tour Operator
Table of contents
1. Introduction 3
2. The role tour operator 3
3. Different Type of Tour Operators 3
a. The Domestic Operators 3
b. The Incoming Tours Operators 3
c. Mass Market tour operators 3
d. Specialist tour operators 3
e. Independent tour operator 3
4. Forces affecting on tour operators 4
a. External 4
b. Internal: 4
5. Package Holiday or Inclusive Tour 4
a. Inclusive tour Product Transport 4
b. Inclusive tour Product–Accommodation 4
c. Inclusive Tour Product Transfer and extra 4
6. Planning, marketing and negotiating package tours 5
a. Market research 5
b. Negotiating 5
1. Airline Negotiation 5
2. Accommodation negotiations 5
3. Transfers and Ancillary services Negotiations 6
7. Associated ... Show more content on Helpwriting.net ...
Management, leadership, communication and organisational culture are also major forces.
5. Package Holiday or Inclusive Tour
According to Holloway(2009) "Inclusive tour" is the product that tour operators offer to customer
by packaging combination of series of integrated travel services which consist of an
accommodation, transport and other services as transfer and extras. By buying in bulk the operators
are able to offer this package at a cheaper price than the customer could obtain themselves.
Therefore the operators are able to create and give to the customer an "inclusive Tour" in a
competitive price.

Package holidays include tailor made holidays with ancillary products and services.
a. Inclusive tour Product Transport
Consists of a seat on charter or scheduled flight, Place on ferry, Cabin on a cruise ship, Train seat,
Coach seat.
b. Inclusive tour Product–Accommodation
Hotels: motels, and taverns
Villas and apartments
c. Inclusive Tour Product Transfer and extra
Coach transfer, taxi transfer,
Overseas representative
Excursion
Insurance
Care hire
6. Planning, marketing and negotiating package tours
To plan a package holiday companies has to allow time for contracting hotels and airlines and other
services, and this normally takes 12 and 18 months before the first projected departure.
"Planning, negotiating, contracting, marketing and successfully administering a package holiday is a
complex management task and

Analysis Of The Software Language And Tools Used In The...
This chapter is about the software language and the tools used in the development of the project.
The platform used here is .NET. The Primary languages are C#, VB, and J#. In this project C# is
chosen for implementation. 5.2. DOTNET 5.2 .1 INTRODUCTION TO DOTNET Microsoft .NET
is a set of Microsoft software technologies for rapidly building and integrating XML Web services,
Microsoft Windows–based applications, and Web solutions. THE .NET FRAMEWORK The .NET
Framework has two main parts: 1. The Common Language Runtime (CLR). 2. A hierarchical set of
class libraries. 5.2.3 MANAGE CODE MANAGED CODE is a meta data. This provides a
guaranteed secure execution and interoperability. 5.2.4 MANAGE DATA With Managed Code
comes Managed ... Show more content on Helpwriting.net ...
There are also efficient means of converting value types to object types if and when necessary. The
set of classes is pretty comprehensive, providing collections, file, screen, and network I/O,
threading, and so on, as well as XML and database connectivity. The class library has a number of
namespaces, having different functionalities, with minimum dependency between them.
LANGUAGES SUPPORTED BY .NET The multi–language capability of the .NET Framework and
Visual Studio .NET enables developers to use their existing programming skills to build all types of
applications and XML Web services. The .NET framework supports new versions of Microsoft's old
favorites Visual Basic and C++ (as VB.NET and Managed C++), but there are also a number of new
additions to the family. Managed Extensions for C++ and attributed programming are just some of
the enhancements made to the C++ language. Managed Extensions simplify the task of migrating
existing C++ applications to the new .NET Framework. C# is Microsoft's new language. It's a C–
style language that is essentially "C++ for Rapid Application Development". Unlike other
languages, its specification is just the grammar of the language. It has no standard library of its own,
and instead has been designed with the intention of using the .NET libraries as its own. Microsoft
Visual J# .NET provides the easiest transition for Java–language developers into the world of

Chapter 2— Auditing It Governance Controls
Chapter 2– Auditing IT Governance Controls
TRUE/FALSE
1. To fulfill the segregation of duties control objective, computer processing functions (like
authorization of credit and billing) are separated.
2. To ensure sound internal control, program coding and program processing should be separated.
3. Some systems professionals have unrestricted access to the organization's programs and data.
4 . IT governance focuses on the management and assessment of strategic IT resources
5. Distributed data processing places the control IT recourses under end users.
6. An advantage of distributed data processing is that redundant tasks are greatly eliminated
7. Certain duties that are deemed incompatible in a manual system ... Show more content on
Helpwriting.net ...
|data corruption caused by program errors |
|d. |system crashes |
6. Which is the most critical segregation of duties in the centralized computer services function?
|a. |systems development from data processing |
|b. |data operations from data librarian |
|c. |data preparation from data control |
|d. |data control from data librarian |
7. Systems development is separated from data processing activities because failure to do so
|a. |weakens database access security |
|b. |allows programmers access to make unauthorized changes to applications during execution |
|c. |results in inadequate documentation |
|d. |results in master files being inadvertently

Basic Applications Of Stl
# std::vector
The Standard Template Library(STL) provides several useful containers and algorithms built in to
C++. These powerful tools help prevent the developer from reinventing the wheel. The vector is one
such container provided by STL.
The ```std::vector``` is a sequence container that supports random access of data like an array.
However, vectors can dynamically resize themselves when more data needs to be inserted. Thus
they allow very efficient data access and relatively efficient adding or removing of elements from
the end.
**Creating a vector object**
```C++
#include (–– removed HTML ––)
#include (–– removed HTML ––) int main(){ std::vector (–– removed HTML ––) vec_name1;
//Creates an empty vector of integers ... Show more content on Helpwriting.net ...
This can be done using the "[]" operator. However one must always be careful not to access an index
greater than or equal to the size of the vector. Doing so results in a segmentation fault, causing the
application to terminate.
**Dynamically resizing the vector**
```C++
vec_name2.push_back(25); //Increases the size of the vector by 1 and sets the last element to 25
vec_name2.pop_back(); //Deletes the last element from the vector and reduces the size of the vector
by 1
```
Vectors support dynamic resizing when elements are added or removed from the end of the vector.
This can be done using the push_back and pop_back methods.
The push_back method is used to dynamically add elements to the end of the vector.
`vec_name2.push_back(25)` pushes 25 to the end of the vector. The size of the vector increases by 1
after this operation.
The pop_back method is used to dynamically remove elements from the end of the vector.
`vec_name2.pop_back()` removes the last element from the vector. The size of the vector decreases

by 1 after this operation.
**Iterating through all the elements of the vector**
```C++
for(int i=0; i<vec_name2.size(); i++){ // vec_name2.size() returns the number of elements in the
vector. std::cout<<"The value at the "<<i<<"th index is : "<<vec_name2[i]<<'n'; }
```
Vectors can be iterated through the same way as an array. A for loop is used

The Basic Level For A Good Programmer
Abstract of the Project: The compilers are the softwares which translates the computer language
(source code) into a language more basic to the machine level. The languages such as C, C++, etc
are some famous compilers. In this project, the main concept was about the understanding of
compilers but the best way to explain was with the help of famous and easy Object Oriented
Programming language C++.
The project gives the vivid and simple view of C++ from the most basic level to the required high
level for a good programmer. The project can be treated as a book on C++ in simple language by the
student & for the student. The project later on comprises of topics from the basic level – Identifiers
and keywords, Data types, operators and types of operators then to an upper level – Operator
Overloading, Polymorphism, Inheritance, Encapsulation, Constructors and Destructors, Inline
functions, etc. All the topics are discussed precisely and in simple language with suitable examples.
1. Introduction:
A compiler is a computer program that translates a computer program written in one computer
language (source language) into an equivalent program written in another computer language (target
language). Interpreter is similar to compiler but interpreter compiles line by line while compiler
compiles as a whole. Examples: C, C++, BASIC, COBAL, etc. The C programming language has
been used for last few decades for almost all the applications. Recently, the C++ with Object
Oriented

Lab Report
In this project, C. Elegans are hermaphrodite worms that will be used since they are easy to maintain
in lab, as well as have short life cycles. The gene that the project attempted to knockdown in C.
Elegans with RNAi treatment is the unc–22 gene. RNAi disrupts gene expression in the presence of
double stranded RNA (dsRNA) that is complementary to target gene sequence. The unc–22 gene
codes for a muscle protein called twitchin in wild–type worms. The Unc–22 is required for muscle
regulation and maintenance in C.Elegans. To verify that the RNAi treatment worked, would check
the unc–22 mRNA levels in the worms, in addition to phenotype observation. The goal of this
project is to determine the effect of the RNAi targeting the gene unc–22 in C. Elegans through
visual observation of worm ... Show more content on Helpwriting.net ...
B. Methods –refer to lab manual pages 90–100– The HT115(DE3) bacteria contains the gene for
viral RNA polymerase, T7 Polymerase, which is controlled by lac promoter and operator. Lac
operator will be repressed until IPTG is added to bacteria. The bacteria has ampicillin resistance
gene and can either have no RNAi insert (control plate) or PCR product that is a portion of target
gene (unc–22). With two T7 promoters, the PCR product will be transcribed by the T7 polymerase.
Therefore, a double stranded RNA (dsRNA) product is produced from the plasmid, once IPTG is
added to activate the lac operator of T7 polymerase. The dsRNA can be delivered to the worms in
many ways, but in this particular experiment, the bacteria containing plasmid for dsRNA is fed to
the worms. The dsRNA is able to move throughout cells in worms by the pore created by SID–1

National Cranberry Cooperative
Case Report: National Cranberry Cooperative Fill in your name in the header. Please read the
Course Syllabus for guidelines on collaboration in assignments: Below, write your answers to
Guiding Questions 1–4. The case is due at the beginning of class on January 29 (Wednesday). Please
submit only one document per group. We will discuss the answers in class. You may want to print
out your answers and charts for your reference during the class discussion. Some additional
information about National Cranberry follows. Not necessarily all of this information is relevant to
your answers. You may assume that: On an average "busy" day 18,000 bbl arrive over the 12–hr
period (7 am to 7 pm). This is based on a typical busy day in September. ... Show more content on
Helpwriting.net ...
First of all, purchasing a light meter and hiring an operator would reduce large amount of
unnecessary cost incurred from cranberries that are misidentified by the chief berry receiver. The
case reports that half of 450,000 bbls of berries were misidentified as No.3. Since $1.50 was paid for
every No.3 berries, we can say that $337,500 was overpaid. Assuming that the cost of this system is
about $40,000 and the cost of full–time skilled operator is about $34,944 (as a straight–time pay rate
for the full–year employee) per year, we can calculate the return on investment in the light meter
system. The return would be 4.503 ($337,500/$74,944). Even though, the operator gets paid more
than the amount above, the return on the investment would still be positive. Secondly, purchasing
one additional dryer would cost $60,000. Then, the process capacity would increase to 800 bbls/hr.
The dry berries (375bbls/hr) and the wet berries (800bbls/hr) would now sum up to 1175 bbls/hr,
which will increase the utilization rate of separators to 97.91%. The resulting increase in flow rate
could reduce the overtime labor as much as $78,000 (assuming 12,000 over time hours of all
workers * $6.5/hr) and the return on the investment would be 0.3 (18,000/60,000). Thirdly,
purchasing the fifth Kiwanee Dumper had increased the capacity by 600

Components Programming And Object Oriented Programming...
1. INTRODUCTION:
C++ programming language is one of the well designed and widely accepted object oriented
programming language. It was called that C++ programming language is an enhanced version of C
language with some extra keywords. It is improved and reliable form of C language.
C++ programming language has various properties due to which it becomes quite popular:–
⦁ It supports all features of both structure programming and object oriented programming language.
⦁ It provides the easiest way to handle the data hiding and encapsulation with the help of powerful
keywords such as class, private, public, and protected.
⦁ In this programming language we have to understand the meaning of various terms such as
objects, class, data abstraction and encapsulation, inheritance (one of the most powerful concept),
polymorphism, data binding, and message passing etc.
⦁ It also provides overloading of operators and functions.
⦁ C++ focuses on function and class templates for handling parameterized data types.
Advantagses of C++ :–
⦁ C++, the object oriented language provides a standard class library that can be extended by the
users, thus saving a lot of coding and debugging effort.
⦁ Object oriented language greatly enhance the possibility of reuse.
⦁ It also provides many other advantages in the production and maintenance of software such as
shorter development times, high degree of code sharing and malleability.
These advantages make OOPs an important technology for building

Home Work 1.2.6
Home Work –1 2.9) Write a single statement or line that accomplishes each of the following a) Print
the message "Enter two numbers". Answer: std::cout<< "enter two numbers"; b) Assign the product
of variables b and c to variable a Answer: int a=b*c; c) State that a program performs a payroll
calculation (i.e., use text that helps to document a program) Answer: // program performs a payroll
calculation (or) /*program performs a payroll calculation*/ d) Input three integer values from the
keyboard into integer variables a, b and c. Answer: std::cin>>a>>b>>c; 2.11) Fill in the blanks a)
What arithmetic operations are on the same level of precedence as multiplication?__________ ...
Show more content on Helpwriting.net ...
Reason: C++ applies the operators in arithmetic expression in precise order determined by these
rules of Operator precedence. b) When parentheses are nested, which set of parentheses is evaluated
first in an arithmetic expression? Answer: Inner most parentheses Reason: Parentheses are used to
specify the order of evaluation. Expressions within the parentheses are evaluated first. If parentheses
are nested, the inner most parentheses is evaluated first. c) A location in the computer's memory that
may contain different values at various times throughout the Execution of a program is called a
variable. 2.12) Answer x=2,y=3 a) cout<<<< "x="; Answer : x= d) cout<< "x="<<<< "="<>x>>y;
Answer : nothing h) //cout<< "x+y=" <<< "n"; Answer :

Nimrod: A new Programming Language
Numerous amounts of companies and individuals write code to make large and small projects more
efficient and easier to fathom. In 2014, Nimrod became a new systems programming language.
Nimrod, a new language with a high metaprogramming support, which is programming, but its
basically writing code that writes code. Also generics and exception tracking built in, with optional
garbage collection. Nimrod is compatible to compile with C, C++, Objective–C, or Java Script.
"Generic programming is a style of computer programming is which algorithms are written in terms
of to–be–specified–later that are the instantiated when needed for specific types provided as
parameters". In other words, it is occupying or reusing an algorithm and changing its
implementations. Garbage collection is an automatic memory management and heap allocation that
developments and distinguishes dormant memory block and reallocates storage for recycle. The
initial job of garbage collection is to reduce or eliminate memory lost. This will create more
memory; thus, running the program more efficient. Nimrod is competing with the top computer
language in the world, C programming being the main rival. Andreas Rumpf is the creator of
Nimrod programming language. He created this programming language during his leisure time.
Andreas Rumpf works for a top private company. During his career, Andreas persistently
endeavored to construct his own start–up, which would permit him to program in Nimrod full–time.
Over

hnt travel & tourism
BTEC National Level 3 Travel and Tourism 2010
13
Unit 13: Tour Operations
Unit 13 Tour Operations
Unit 13 Overview
10 Credits
Tour operators play a very important role in travel and tourism, by arranging the package holidays
that are such an important feature of life in the 21st century. Tour operators are at the forefront of
today's travel and tourism sector, seeking out new destinations and holiday experiences to satisfy the
ever–changing needs and expectations of travellers. They work in partnership with airlines,
hoteliers, car hire companies and a variety of other travel service suppliers to package their holiday
products. Tour operators sell holidays through travel agents and direct to the public,
with ... Show more content on Helpwriting.net ...
– see textbook pages 38–44
Tour operators work in partnership with many travel and tourism companies and organisations when
developing and selling their holidays. Complete the following chart with details of the main ways in
which tour operators work with travel agents, accommodation providers, ancillary service providers,
surface transport operators, tourist attractions, airlines and regulatory bodies.
Travel and tourism industry
Travel agents
Links with tour operators
Hotels and other accommodation providers Ancillary service providers
Surface transport operators (e.g. coach companies, taxi firms)
Tourist attractions

Airlines
Regulatory bodies
© Travel and Tourism Publishing Ltd. 2010
www.tandtpublishing.co.uk
8
BTEC National Level 3 Travel and Tourism 2010
Unit 13: Tour Operations
Activity CD13.3 – The Legal Framework of Tour
Operations
Need help with this? – see textbook pages 44–47
Match up the correct description to each of the examples of tour operations legislation listed in the
table below. For example, if you think that contract

DIGITAL DESIGN THROUGH VERILOG
www.jntuworld.com
Code No: L0422
Set No. 1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. II Sem., I Mid–Term Examinations, Jan/Feb – 2011
DIGITAL DESIGN THROUGH VERILOG
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
I
Choose the correct alternative:
1.
Verilog HDL is used to model
A) An Analog System
B) A Digital System
2.
3.
C) A Discrete System
[
]
D)All the above
Which of the following is not an white space character
A) t

B) n
C) b
D) s
$stop is used for
A) break point
[
D) terminate the program
B) start point
C) initial point
[
D
L
R
O
]
]
4.
To provide interface by which a module can ... Show more content on Helpwriting.net ...
10.
J
C) A Discrete System
[
]
D)All the above
Which of the following is not an white space character
A) t
B) n
C) b
D) s

$stop is used for
A) break point
[
D) terminate the program
B) start point
C) initial point
[
Cont......2
www.jntuworld.com
]
]
www.jntuworld.com
Code No: L0422
:2:
Set No. 2
II
Fill in the blanks
11.
To represent physical connection between structural elements __________data type can be used.
12.
Implicit continuous assignment of delay can be used in ____________ modeling.
13.
Sequential blocks in behavioral modeling are specified with __________, _________Keywords.
14.

Delay associated with a gate output transition to a '1' from other value is called _________delay.
15.
__________is used to verify design in real–life environment with real system software running on
system 16.
Delay associated with a gate output transition to the high impedance value (Z) from other value is
called ____________
17.
Event based timing control is possible with _____________modeling
18.
In Verilog, with respect to gate delay's, which delay is the minimum of all delays ___________
19.
Process of converting a high–level description of design into an optimized gate level representation
is called _____________
20.
Delay associated with a gate output transition to a '0' from another value is called __________
D
L
R
O
W
U
J
T
N
–oOo–
www.jntuworld.com

www.jntuworld.com
Code

Essay about Doc. Unix
1. You have just finished a 25–page paper that you have written using Emacs.The file containing the
paper is called /assignments/data_sources. After your instructor has briefly looked at the paper, she
recommends that you change all instances of the reference
"data is" to "data are" before you submit it.Which of the following commands can you use to locate
these references in the file for a quick assessment of how much you have to change?
a. find – i 'data is' /assignments/data_sources
b. test /assignments/data_sources "data is"
c. grep "data is" /assignments/data_sources
d. scan –t data is /assignments/data_sources
2. You are interested in determining the number of words in your /assignments/ data_sources file
mentioned in Question ... Show more content on Helpwriting.net ...
window ls –a
d. dir < display
13. You are creating a file to send over the Internet via a satellite connection that only allows you to
send files under 250 KB.Which of the following commands enables you to determine the number of
bytes in the file before you try to send it?
a. cat –s
b. tr –b
c. counter –k
d. wc –c
14. In the command sed –f fixit notes > instructions, what is "fixit"?
a. a script file
b. an operator
c. a function
d. a formatting interpreter
15. When you design a record layout, you should do which of the following?
a. identify each field by data type
b. plan to delimit fields using a dash
c. identify each field by name
d. store only fields relevant to the record's purpose
16. What sed command option enables you to append new text to a file?

a. p
b. –n
c. a
d. |add
17. Your boss has two salary scale files, salary and salary1, and wants to compare their contents side
by side to see if there are any differences in the files.Which of the following commands should he
use?
a. diff –S salary > salary1
b. comm salary salary1
c. uniq salary < salary1
d. sed ––comp salary salary1
18. When you use the pr command how can you limit the output to only a screen full of text to view.
(Choose all that apply.)
a. Maximize your terminal window to hold 24 lines.
b. Pipe the output into more.
c. Use the –l 23 option.
d. Pipe the less command into the more command.
19. When you use the Awk printf capability, what does the dollar sign ($) represent?
a. a field

Operation Eagle Claw, And It Was A Failure
November 4th 1979American personnel at the US embassy are taken hostage in Teheran, Iran. The
United States had never faced a hostage situation like this before. It did not have the Joint Special
Operations Task Force trained in planning the mission or the resources for low visibility clandestine
missions. The mission to save the hostages is called Operation Eagle Claw, and it was a failure. This
mission on the other hand highlighted areas in the military that need tobe improved, and when the
country required to carry out special operation missions in the future those resources would be there
and ready.
Militant student, followers of the Ayatollah stormed the Embassy and took all personnel hostage.
This was the second time in 1979 the embassy was taken and only a few people remained behind its
gates. The students only planned to take the hostages for a few days, hopping that the United States
would return the ousted Shah, to face trial. When the US refused, to return the Shah, the stalemate
began, and the students held the hostages for 444 days.
The US realized that the hostages are not being released as before, and a rescue mission was needed
to secure their freedom. A group was quickly put together to plan the rescue. Dubbed Operation Rice
Bowl, flag officers from every branch of the military, began to plan the mission and gather
intelligence. The officers of the planning, operations ensured that every branch of the military would
have a piece of the mission; no

Comp230-Intro to Scripting Essay
Week 1 Week 1 – Quiz A 1. The name of the service that controls the queue of print jobs with the
Window NET command is ______. SPOOLER 2. Which of the following Windows commands will
shutdown and restart your computer in 2 minutes? Shutdown –r –t 120 3. Which Windows shutdown
command switch is sued to log off the current user of the local computer? –l 4. Which one of the
following Windows AT commands specifies an action that will take place at 3:00 p.m.? At 15:00
command 5. From the Start/Run dialog, the command used to open the 32–bit Windows command
prompt is ______. cmd 6. The Windows CLI command used to turn off the display of the current
command in a batch file is ______. @command Week1 – Quiz B 1. Which ... Show more content on
Helpwriting.net ...
ServiceName? DELETE 2. The netsh command that will set the IP Address of the interface name
"NIC" to 192.168.100.10 255.255.255.0 with a metric of 1 is _____. netsh interface ip set address
"NIC" source=static 192.168.100.10 255.255.255.0 1 3. Which of the following Windows
commands will shutdown and power down the computer FileServer in 2 minutes? shutdown –s –m
FileServer –t 120 4. Which one of the following Windows AT commands specifies an action that
will take place at 3:00 p.m.? at 15:00 command 5. The Windows CLI command that is used to
display the search path for the executable files is _____. path 6. The Windows CLI command used
to turn off the display of the current command in a batch file is _____. @command Week 1 – Quiz
G 1. Which one of the following Windows NET commands will allow other computers to access the
C:Data directory under the share name UserData? NET SHARE UserData=C:Data 2. The netsh
command that will set the IP Address of the interface name "NIC" to a DHCP supplied IP address is
_____. netsh interface ip set address "NIC" source=dhcp 3. Which Windows shutdown command
switch is used to log off the current user of the local computer? –1 4. Which Windows shutdown
command switch is used to shutdown and turn off a local or remote computer? /s 5. From the
Start/Run dialog, the command used to open the 32–bit Windows command prompt is _____. cmd 6.
The Windows CLI command

Mat 540 Final Paper
1. Why does the following program output –1? #include #include #include void main(){
system("cls"); long a = 2147483647; printf("%d", a); } 2. Write a program to calculate and display
the y intercept of a point lying on a straight line using printf() (only one is allowed) and arithmetic
operators where slope is 4, x coordinate is –1, and y coordinate in –6. a. Without using variables. b.
With variables. 3. Write a program to calculate and display the slope of a straight line between two
points i.e. (–2, 4) and (1, 2) respectively in a two–dimensional plane using the printf() (only one is
allowed) and arithmetic operators. a. Without using variables. b. With variables. 4. Write a program
to calculate and display the result of a second order equation where ... Show more content on
Helpwriting.net ...
You can use the last two digits of your registration number as the value of x. a. Without using
variables. b. With variables. 5. Write a program to determine discriminant (using appropriate
arithmetic operators) of a second order equation where the values of constants a, b, and c are 1, 6,
and 5 respectively. (Hint: use nested ternary operators). Display Message Condition There are two
real roots. Where the value of discriminant > 0 There is one real root. Where the value of
discriminant = 0 There are two complex roots. Where the value of discriminant < 0 a. Without using
variables. b. With variables. 6. Generate the following truth table using logical operators: A B AND
OR NAND NOR 0 0 0 0 1 1 0 1 0 1 1 0 1 0 0 1 1 0 1 1 1 1 0

Types Of Conbols And Definition
C CONSTANTS
These are also known as literals and are defined as the fixed values. This means they cannot be
altered. They may be floating type, integer type, character type etc. It may also be defined as
Variables, but there values cannot be changed.
The string literals are written in the double quotes. These characters may be plain characters or may
be escape characters also.
Defining Constants
 The #define Preprocessor
It is one of the way to define constants as...
#define value of identifier
Example illustrating as....
#include
#define VARIABLE ONE 20
#define VARIABLE TWO 60
#define NEWLINE 'n' int main() { int ADD; ADD = VARIABLE ONE + VARIABLE TWO;
printf("value of ADD : %d", ADD); printf("%c", NEWLINE);
return ... Show more content on Helpwriting.net ...
Just as in case of mathematics we can make calculations, similarly here also we can do same. It may
also be noted that it is one of the simplest task that the C programming performs. There are
following types of operators as...
 Arithmetic Operators
It performs the simple mathematical addition, subtraction, division, modulus, multiplication,
incremental and decrement operators. Example illustrating it as....
#include int main()
{
int a = 11; int b = 110; int c ; c = a + b; printf("addition is %dn", c ); c = a – b; printf("subt. is
%dn", c ); c = a * b; printf("multip. c is %dn", c ); c = b / a; printf("div. is %dn", c ); c = a % b;
printf("modulus is %dn", c ); c = a++; printf("inc. is %dn", c ); c = a––; printf("decr. is %dn", c );
}

Result...
sum is 121 sub. is –99 multip. is 1210 div. is 10. modulus is 0 inc. is 12 dec. is 10
 Relational Operators
This simply relates the operators as which includes greater than, less than, not equal to, greater than
or equal to, less than or equal to as....
#include int main()
{
int a = 21; int b = 10; int c ; if( a == b ) { printf("a is equal to bn" ); } else { printf("a is not equal to
bn" ); } if ( a < b ) { printf("a is less than bn" ); } else { printf("a is not less than bn" ); } if ( a > b )
{ printf("a is greater than bn" ); } else { printf("a is not greater than bn" ); }

What Is Procedural Programming Paradigm
Task 1
What is Procedural Programming Paradigm?
In Information Technology(IT) jargon Programming is termed as an innovative process where the
computer receives instructions how to perform a task as per the requirement or solving a specific
problem.
The various ways of attending to the process of programming is known as programming paradigms.
Majority of programming language comes under one paradigm; contrary to this one could observe
some languages having elements of multiple paradigms. Paradigm is a way where a specific code is
arranged. A code comprises various commands or instructions there in relation to functions and or
procedures.
Most vital programming paradigms can be listed as Procedural paradigms and the object – oriented
paradigms.
Key ... Show more content on Helpwriting.net ...
When a particular programme is taken into consideration you may find variables in it. This variable
will be mainly applicable or belongs to that particular function and this is called a local variable.
When variables are need within and outside the function is known to be a global variable.
Produces
Produces are some times called sub programme, routine or method which relates to sequence of
orders to carry out the task.
The main types of Programming Paradigm.
Out of the vast numbers of programming paradigms that are available, the following are know to be
some of the main types.
1. Functional
2. Logical
3. Imperative
4. Object oriented
Functional
In this type of programming which are considered as a subset of declarative programming. The use
of expressions take place and programs created using this paradigm use functions based on the
particular input or the instructions which are provided to the computer.
Eg: Haskell
Logical
Logical paradigm use steps or instructions where are based on solving problems such as
computation as automated reasoning over a body of

Chapter 8 Microbial Genetics
Microbiology: An Introduction, 11e (Tortora/Case) Chapter 8 Microbial Genetics 8.1 Multiple
Choice Questions 1) A gene is best defined as A) a segment of DNA. B) three nucleotides that code
for an amino acid. C) a sequence of nucleotides in DNA that codes for a functional product. D) a
sequence of nucleotides in RNA that codes for a functional product. E) a transcribed unit of DNA.
Answer: C Skill: Recall 2) Which of the following pairs is mismatched? A) DNA polymerase –
makes a molecule of DNA from a DNA template B) RNA polymerase – makes a molecule of RNA
from an RNA template C) DNA ligase – joins segments of DNA D) transposase – insertion of DNA
segments into DNA E) DNA gyrase – coils and twists DNAAnswer: ... Show more content on
Helpwriting.net ...
B) phosphate. C) deoxyribose. D) thymine. E) The answer cannot be determined based on the
information provided. Answer: C Skill: Recall 21) The damage caused by ultraviolet radiation is A)
never repaired. B) repaired during transcription. C) repaired during translation. D) cut out and
replaced. E) repaired by DNA replication. Answer: D Skill: Recall Table 8.2 Codon on mRNA and
corresponding amino acid |UUA |leucine |UAA |nonsense | |GCA |alanine |AAU |sparagine | |AAG
|lysine |UGC |cysteine | |GUU |valine |UCG, UCU |serine | 22) Refer to Table 8.2. If the sequence of
amino acids encoded by a strand of DNA is serine–alanine–lysine–leucine, what is the order of
bases in the sense strand of DNA? A) 3' UGUGCAAAGUUA B) 3' AGACGTTTCAAT C) 3'
TCTCGTTTGTTA D) 5' TGTGCTTTCTTA E) 5' AGAGCTTTGAAT Answer: B Skill: Analysis 23)
Refer to Table 8.2. If the sequence of amino acids encoded by a strand of DNA is serine–alanine–
lysine–leucine, the coding for the antisense strand of DNA is A) 5' ACAGTTTCAAT. B) 5'
TCTGCAAAGTTA. C) 3' UGUGCAAAGUUA. D) 3' UCUCGAAAGUUA. E) 3'
TCACGUUUCAAU. Answer: B Skill: Analysis 24) Refer to Table 8.2 The anticodon for

L.E.S. Inc
L. E. S., Inc.
I. Problem What will the company do to meet its objectives regarding increasing the volume of
production and its quality at a much lower cost?
II. Areas of Concern
1. L. E. S. Inc.
a. A large U.S. company engaged in the manufacture and sales of a wide range of electrical
products;
b. The manufacturing operations are organized on a divisional basis: power and transmission,
electrical components, and small appliances; and,
c. There are 13 supervisors, 4 of which have more than 2 years in service and 2 of these have
supervisory training.
2. Martin Collins
a. The Manufacturing Manager for six years;
b. An MBA, 44 years of age and responsible for Worcester Plant; and,
c. Reports to the divisional vice president in ... Show more content on Helpwriting.net ...
This will jeopardize quality of the products since operators may have do not have enough expertise
in running the production like their existing employees;
b. If in case these operators do not have enough skills or experience, It is hard to train to become
efficient when the supervisors themselves did not have training and are considered not that efficient
as expected; and,
c. This is an additional cost.
3. To reorganize existing resources.
Advantages:
a. Division of labor will attend immediate / day–to–day concerns and long–term development;
b. This will create sense of direction for the company and will establish organized procedures on
their daily productions or operations;
c. There will be a focus on quality and volume of output;
d. Everything will be documented so that when there will be problems, the next person who will
deal the problem will be aware of it.
Disadvantage:

a. Adjusting period for everyone will take place which will somehow affect production.
IV. Recommendation Given the alternatives and the evaluations, it is best if the company will
reorganize its existing resources. In this way, procedures will be organized and problems with their
corresponding solutions will be documented. It will be easier both for the supervisors and operators
to act when they will encounter the same problem. Furthermore, the management will know who
will be responsible for the delay of production or the reason

Operators Should Be Allowed To Ride On PIV
c. No additional personnel other than the operator shall be permitted to ride on PIVs unless an
original equipment manufactured additional seat is available. d. Arms or legs are prohibited from
being placed between the uprights of the mast or outside the running lines of the vehicles. e. When a
PIV is left unattended, load engaging means shall be fully lowered, controls will be neutralized,
power shut off, and brakes set. Wheels will be blocked if the vehicle is parked on an incline. f. A
safe distance shall be maintained from the edge of ramps or platforms while on any elevated dock or
platform. Where possible, yellow lines will be painted to designate a safe distance. PIVs will not be
used in any other manner than what they are designed to be used for. g. The operator will not ...
Show more content on Helpwriting.net ...
Operators will not carry anything on the overhead guard. e. Operators will ensure vehicle
sound/illuminating warning devices are operational. f. Operators will yield right of way to
pedestrians, emergency vehicles, and avoid pedestrian lanes. g. Operators will drive cautiously on
uneven or slippery surfaces. h. Operators will ensure the load is pointed uphill where the gradient is
greater than 10 percent. i. Operators will ensure fire protection equipment is carried with the vehicle
and is in proper working order. j. Operator will immediately report any accident to their supervisor,
the Safety Officer/Fleet Manager for investigation/follow–up. Pre–start Requirements (Operators) a.
Operator will verify that all brakes, controls, gauges, lights, seat belts, and routine operational
features are in proper working order. These items shall be examined before and after each use.
Defects when found shall be immediately reported to the supervisor for repair. b. Operator will
remove vehicle from service any time it is found to be in need of repair, defective, or in any way
unsafe. The vehicle will be taken out of service until it has been restored to safe operating

Aal Model 610 Joa Case Study
2. Summarize the use of the AAPL Model 610 JOA and discuss how joint operations are paid for. Be
sure and discuss Exhibit C dealing with COPAS. The AAPL form 610 is an agreement between
operators and non–operators in a JOA and is about the operations, the role and the responsibilities of
the participants. The operators are responsible for the cost of operations and send a bill to the non–
operators depending on the share of responsibilities. For major expenditures, the operator needs an
AFE from the non–operator. The Exhibit C of the Agreement dealing with COPAS details the
accounting procedures to follow during the joint operations. 3. Summarize the use of Farmout
agreements including their purpose and how they help save a lease from termination.

Entanglement and Quantum Mechanics
Entanglement is one of the most fundamental and yet unintuitive concepts in quantum mechanics.
Maximally entangled two–qubit states, often called Bell states, where shown to violate classical
(local) correlation properties [33, 34] and are an essential building block for quantum
communication and distributed quantum computation. Unfortunately, such entangled states are also
difficult to generate and sustain as interaction with a noisy environment typically leads to rapid loss
of their unique quantum properties. In the context of QSC, such an entanglement has been generated
exploring various types of interactions such as direct qubit–qubit interaction [35, 36], coupling to a
common cavity mode [37] or photon–mediated interactions for qubits embedded in a waveguide
[38].
In this context, remote entanglement of spatially separated quantum systems have important im–
plications in addressing the scaling problem for quantum information processing. Indeed, as a
solution to this scaling issue, we propose here to follow a modular approach where the quantum
information is encoded, protected and locally manipulated in small units consisting of a few cavity
modes or/and few qubits and the communication between modules is ensured through quantum
teleportation techniques. Sharing of a pair of entangled subsystems between two modules is central
for these teleportation pro– tocols. While the isolation of the modules simplifies the scaling by
avoiding any undesired cross–talk between the

Career Assessment Paper
Michael Iemma
Professor Heeter
BUSN 101
04 June 2011
Career Assessment Paper In order for me to complete this career assessment paper, I initially took an
Interest Inventory survey. Upon completing this process, it revealed that my personality profile
score was (I, C, A). These three letters represented my strengths and interests in determining which
career field would best suit me. The letter "I" represents the personality of investigating. This
includes people who like to observe, learn, investigate, analyze or solve problems. Some of the
careers that are associated with this include: Chemist, doctor, investigator, and engineer. The second
letter, "C" from my profile score represents the personality trait of being ... Show more content on
Helpwriting.net ...
The entering of data is an important part of the computer operator's daily routine. Computer
operators may also have to take calls from customers complaining of computer system issues. The
computer operator will diagnose the problem and then walk the individual through how to fix the
situation. Should further help be needed, the computer operator will contact the necessary parties or
advise the customer how to do so on their own. There are a few traits which will come in handy in
relation to the role of a computer operator. One trait which all computer operators should possess to
aid them in their line of work is well–rounded computer knowledge. Computer operators have a
wide array of duties which they must take part in on a daily basis. Computer operators should also
be good communicators. This is due to the fact that computer operators will often have to deal with
other individuals such as clients, coworkers and supervisory staff members. A computer operator
must also be an inventive thinker. The computer operator will have to solve problems every now and
again. With that being the case, one who fills this job role must be able to exhibit good problem
solving skills in an inventive manner which will resolve any issues that may arise. Also, a computer

Int Oddbits ( Void )
int oddBits(void) { int one = 0x49; int two = one | one<<< 17; return three;
}
int sign(int x) { /*negative and all the way right*/ return ((!x^1)|(x >> 31));
}
int byteSwap(int x, int n, int m) { /*shifts by bytes*/ int n1 = n<<<< n1) & x; int mB = (0xFF <<
m1) & x; int both = (0xFF << n) | 0xFF << m; /*bytes back*/ int nBB = (nB>>n) & 0xFF; int mBB
= (mB >> m) & 0xFF; /*new position*/ int nBBB = nBB<<<<<<>8&0xFF; int three =
x>>16&0xFF; //int four = x>>24&0xFF;// int five = one<<<>24)&0xFF; int b = (x>>8)&0xFF00;
int c = (x<< wrote:
/*
* CS224 Data Lab, Fall 2016 * * * * bits.c – Source file with your solutions to the Lab. * This is the
file you will hand in to your instructor. * * WARNING: Do not include the header; it confuses the
dlc * compiler. You can still use printf for debugging without including * , although you might get a
compiler warning. In general, * it 's not good practice to ignore compiler warnings, but in this * case
it 's OK. */
#if 0
/*
* Instructions to Students: * * STEP 1: Read the following instructions carefully. */
You will provide your solution to the Data Lab by editing the collection of functions in this source
file.
INTEGER CODING RULES: Replace the "return" statement in each function with one or more
lines of C code that implements the function. Your code must conform to the following style: int
Funct(arg1, arg2, ...) { /* brief description of how

Polaroid Case Study Essay
BACKDROP
Polaroid is manufacturer of photographic equipment, accessories and related items used in instant
photography. The organization was divided into two main divisions – The Consumer Photography
Division and the Technical and Industrial Division with each of these divisions contributing around
40% of Polaroid's revenues of $ 1.3 billion in 1984.
The company produced two main types of films:
1. The peel apart film which required the user to physically pull the film out of the camera and,
2. The integral film, which came out of the camera automatically.
The integral films were manufactured in the R2 building at the Waltham Massachusetts site. The
operations at R2 included production of sheet metal springs, ... Show more content on
Helpwriting.net ...
This precluded the possibility of finding defects which would occur with imprecisely functioning
cameras.
GREENLIGHT
The project objective was quality monitoring costs reduction while at the same time improving the
quality of the product. The improvements in quality control processes were focused along with
reducing the number of samples. The plan consisted of three distinct elements:
1. Statistical process control would be adapted as processes in control and capable of producing
within specifications would produce more consistent quality.
2. Production operators would be given the process control tools that the process engineering
technicians had been using and in conjunction with sampling would be expected to make disposition
decisions themselves.
3. Quality control auditors would concentrate on training operators and operationalizing
specifications on their new products.

The statistical process control system involving both acceptance sampling and automated process
control was to be implemented. SPC involved testing for productions within a pre–specified range.
If the production went beyond the range, the production process had to be shut down maintenance
was to be called to perform maintenance and recalibration. As a part of the process, the operators
were to take six random measurements of a process characteristic during the course of their shift and
then plot the mean measured value.
This

Nt1330 Unit 1 Assignment
I started this Unit 1: by Learning Guide unit overview introduction to the java programming that
introduction to the operation of a computer. Introduction to java, the java virtual machine, and the
java development and run time environments:  Read the learning guide and reading Assignments.
 Downloaded and install the JDK package and the Net beans integrated development.  Test the
software installation and make sure it is work for me properly.  Participated in the Discussion
Assignment that given and post, comment and rate in the Discussion forum.  Completed and
submitted the given programming Assignment and submitted.  Tested myself by taking the given
self–quiz  Completed recommended reading assignments, learned the basic java code writing,
used Net beans, and write my first java program Hello World application. In addition, flowed by
watching unit 1 optional video lectures, and had much great idea and took the resources ... Show
more content on Helpwriting.net ...
++, // Increment operator Aside from the basic arithmetic operators, Java also includes a unary
increment operator (++) and unary Increment operators by one For example, the expression, Count
= count + 1; //increment the value of count by 1 Is equivalent to, Count++; The increment operators
can be place an operand. When used before an operand, it causes the variable to be incremented by
1, and then the new value is used in the expression in which it appears. For example, int a = 10, int b
= 3; int c = 0; c = ++b + a; //will result to c = 4+10 = 14 && // is a logical and operator that if both
the operands are non– zero, then the condition becomes TRUE. ! = // Relational operators compare
two values and determine the relationship between those Values. The output of evaluation is the
Boolean values true or false Examples Public class Relational

Shuzworld Workflow and Cost Analysis

Recommended

Recommended

More Related Content

Similar to Shuzworld Workflow and Cost Analysis

Similar to Shuzworld Workflow and Cost Analysis (20)

More from Brenda Thomas

More from Brenda Thomas (20)

Recently uploaded

Recently uploaded (20)

Shuzworld Workflow and Cost Analysis