WGS-4215-8T2S, an innovative, Industrial 8-port 10/100/1000T + 2-port 100/1000X SFP Wall-mount Managed Switch, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-4215-8T2S is able to operate reliably, stably and quietly in any environment without affecting its performance.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
9. 9 / 51
Product Overview
Front Panel of WGS-4215-8T2S
12V~48V DC Plug in
12~48V, AC 24V 3-pin
Terminal Block Connector
4 x 10/100/1000BASE-T RJ45
4 x 10/100/1000BASE-T RJ45
2 x 100/1000X SFP Slots
LED
Displays
10. 10 / 51
Product Overview
Front Panel of WGS-4215-8P2S
48V~56V DC Plug in
48~56V, 3-pin Terminal
Block Connector
4 x 10/100/1000BASE-T 802.3at PoE+ RJ45
4 x 10/100/1000BASE-T 802.3at PoE+ RJ45
2 x 100/1000X SFP Slots
LED
Displays
13. 13 / 51
Product Benefits
Specially designed to be installed in:
Control cabinet
Wall enclosure
Automation control panel
Brand-new L2/L4 Managed Switch Form Factor
Innovative Wall-mount Installation
IoT Generation for Small Ethernet Networking
Quick, Safe and Easy Network Deployment
14. 14 / 51
Product Benefits
Powerful Hardware
Redundant power design with 12~48V DC/24V AC and
12~48V DC jack power input (WGS-4215-8T_4215-8T2S)
Design with 48~56V and 48~56V DC jack power input
(WGS-4215-8P2S)
Operating temperature: -40 ~ 75 degrees C
Fanless design with IP30 metal case
15. 15 / 51
Advanced Intelligent Power/PD Management Functions
Product Benefits
PD Alive Check
Scheduled Power Recycling
PoE Port Sequence
PoE Power Schedule
WGS-4215-8P2S
16. 16 / 51
Product Benefits
Intelligent Powered Device Alive Check (WGS-4215-8P2S)
The WGS-4215-8P2S can be configured to monitor connected PD
(Powered Device) status in real time via ping action.
Once the PD stops working and responding, the WGS-4215-8P2S will
resume the PoE port power and bring the PD back to work.
PD Status
Good !!
……
PD is Alive
Back again!
17. 17 / 51
Product Benefits
PoE Schedule (WGS-4215-8P2S)
PoE Schedule is a PoE management function for administrator to turn on
or turn off PoE device, thus saving electricity.
4 Profiles
Per Hour & Min.
Setting
Daily Work
Power Consumption Off-Business Power Saving
Off-Business
Hours
Daily Work
Per Week
Day Setting
18. 18 / 51
Product Benefits
Brand-new L2/L4 Managed Switch Form Factor
The WGS-4215-8T/WGS-4215-8T2S/WGS-4215-8P2S is specially designed to
be installed in a narrow environment, such as wall enclosure or weak
electric box.
“Front Access” design makes the installing, cable wiring and
maintenance very easy for technicians to manage.
19. 19 / 51
Product Benefits
IoT Generation for Small Ethernet Networking
Centralized Power Distribution for PoE Networking
20. 20 / 51
Product Benefits
Next Generation Slim Type Switch
Depth: 56mm
Depth: 25mm
Winner
25mm
Depth: 43.5mm
21. 21 / 51
Product Benefits
Innovative Wall-mount Installation
The WGS-4215-8T/WGS-4215-8T2S/WGS-4215-8P2S’s fixed wall
mounting, magnetic wall mounting or DIN rail installation enables its
efficient use of enclosure.
Fixed wall
mounting
DIN rail
mounting
Magnetic mounting
with wall enclosure
22. 22 / 51
Product Benefits
Quick, Safe and Easy Network Deployment
Its magnetic wall-mount installation enables its efficient use of enclosure
space, thereby making its usability more flexible.
Mount it immediately without utility.
27. 27 / 51
Product Key Features
WGS-4215-8T2S
Operating Temp.
-40~75°C
IPv4/IPv6
Management
24V AC
12V~48V DC
Dual
Power Input
STP
RSTP
MSTP
8-Port
10/100/1000
BASE-T
2-Port SFP
100/1000X
Dual Speed
(WGS-4215-8T2S)
Flat-type
Design
28. 28 / 51
Product Features
Hardware (WGS-4215-8T_WGS-4215-8T2S)
Front access and fanless design
6KV DC contact discharge, 8KV DC air discharge
for ESD protection (WGS-4215-8T)
6KV ESD/6KV EFT protection (WGS-4215-8T2S)
Power Dual-Input (Auto Failover)
Hardware Power Auto Failover
High Availability Network System
Polarity Protection
Wide-ranging Power Input
24V AC/12V ~ 48V DC input
Terminal block wiring or φ5.5 DC plug
Right for home (12V), Car/Bus (24V) or
Telecom (48V DC)
29. 29 / 51
Product Key Features
WGS-4215-8P2S
Operating Temp.
-40~75°C
IPv4/IPv6
Management
48V~56V 3-pin
Terminal Block &
DC Jack
Power Input
PD Alive Check
PoE Schedule
8-Port
10/100/1000
802.3at PoE+
BASE-T
2-Port SFP
100/1000X
Dual Speed
Flat-type
Design
30. 30 / 51
Product Features
Hardware (WGS-4215-8P2S)
Compact, flat and rugged IP30 metal case
Wall-mounted, front access and fanless design
48~56V DC wide power input range
6KV DC contact discharge, 8KV DC air discharge for ESD protection
Performance
10/100/1000BASE-T auto-negotiation and auto MDI/MDI-X
16/20Gbps switch fabric
8K MAC address table size
10K jumbo frame size
Flow control for full duplex operation and back pressure for half
duplex operation
31. 31 / 51
Product Features
Power over Ethernet (WGS-4215-8P2S)
Complies with IEEE 802.3at/af PoE end-span PSE
8 10/100/1000Mbps copper ports with built-in PoE+ injector
48~56V DC, 30.8 watts of PoE+ output per port (depending on
the power supply )
Auto detects powered device and consumption levels
PoE power budget control
Circuit protection prevents power interference between ports
PoE Budget 200 watts
PoE Ability Number of Class 1 PDs, <3.8W 8
Number of Class 2 PDs, <6.5W 8
Number of Class 3 PDs, <12.9W 8
Number of Class 4 PDs, <25.5W 7
32. 32 / 51
Product Features
PoE Sequential Power
The WGS-4215-8P2S has PoE sequential power up function to avoid
damage to power supply.
30W
30W
30W
30W
Power On
30W
30W
30W
30W
33. 33 / 51
Product Features
VLAN
IEEE 802.1Q tagged VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Supports Protected Port
Supports GVRP
Management VLAN
Spanning Tree Protocol
STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol)
34. 34 / 51
Product Features
Multicast
Supports IPv4 IGMP Snooping v1, v2 and v3
Supports IPv6 MLD Snooping v1 and v2
IGMP Querier mode support
IGMP Snooping filtering
MLD Snooping filtering
Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
4 trunk groups, up to 2/8 ports per trunk group
35. 35 / 51
Product Features
Quality of Service
Ingress/Egress Rate Limit per port bandwidth control
8 priority queues on all switch ports
Traffic Classification
• 802.1p CoS
• IP DSCP of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS
policies
DSCP remarking
Voice VLAN
36. 36 / 51
Product Features
Security
Storm Control support
• Broadcast/Unknown unicast/Unknown multicast
Authentication
• IEEE 802.1X Port-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• Built-in TACACS+ client to cooperate with the TACACS+ servers
MAC Security
• Static MAC
• Source/Destination MAC filtering
• Port Security for sourcing MAC address entries filtering
DHCP Snooping
DoS
37. 37 / 51
Product Features
ACL
MAC-based Access Control Entries (ACE)
MAC-based Access Control List (ACL)
IPv4/IPv6 Access Control Entries (ACE)
IPv4/IPv6 Access Control List (ACL)
LLDP
RMON
RMON Event
RMON Alarm
RMON History
39. 39 / 51
Applications
Industrial Area Switch for Data Collection and Forwarding
The WGS-4215-series providing 8 10/100/1000Mbps interfaces with auto MDI/MDIX
feature, is equipped with 8K MAC address table size. The WGS-4215-series can perform
wire-speed packets transfer without the risk of packet loss. With the slim-type IP30 metal
case, it is ideal for the most heavy industrial demanding environments.
40. 40 / 51
Applications
Industrial Area Switch for Data Collection and Forwarding
The WGS-4215-series supporting 10K jumbo packet can handle
large amounts of data transmission linking to a backbone switch
or high-power servers.
41. 41 / 51
Applications
Security Building Automation Switch
The WGS-4215-series restrict network access by denying packets based
on source and destination IP address, TCP/UDP ports or defined typical
network applications.
42. 42 / 51
FTTX/MAN Applications
With 2 dual-speed SFP slots built in, the deployment distance of the WGS-4215-
8T2S/WGS-4215-8P2S can be extended up to 120 kilometers.
To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for
ISPs, and FTTB (Fiber to the Building), the WGS-4215-8T2S/WGS-4215-8P2S can be
connected to different units, offices, floors, houses and departments.
Applications
43. BluBoxx Communication Pvt. Ltd.
102/B, Surekha Apartment, Pune Satara Road,
Pune-411037. Maharashtra, India.
Tel: +91-7875432180, Email: sales@bbcpl.in
www.bbcpl.in