IGS-6325-20S4C4X Industrial Layer 3 Managed Switch features 14 100/1000Mbps SFP ports, 4 shared TP ports, 10 100/1000/2500Mbps SFP ports, 4 10G SFP+ ports and Layer 3 IP routing in a 1U case. With 10Gbps uplink, the IGS-6325-20S4C4X can handle extremely large amounts of data in a secure topology linking to an industrial backbone or high capacity servers.
The IGS-6325-20S4C4X is capable of providing non-blocking switch fabric and wire-speed throughput as high as 158Gbps in the temperature range from -40 to 75 degrees C.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
11. 11 / 49
Product Key Features
IGS-6325-
20S4C4X
AC + 2 DC
Redundant
Power Input
G.8032
ERPS Ring
1588 PTPv2
&
Modbus TCP
Multiple
1G and 10G
Fiber Slots
Hardware
Layer 3 Routing
Cybersecurity
-40~75°C
&
Fanless
12. 12 / 49
Product Features – Layer 3 Routing
Layer 3 Routing
Routing interface provides per VLAN routing mode
Supports maximum 128 VLAN interfaces
Supports maximum 128 routing entries
IPv4/IPv6 hardware static routing
IP Domain A
192.168.1.x
IP Domain B
192.168.2.x
Data
Data
14. 14 / 49
Industrial Cybersecurity Switch
Build Cybersecurity Network to Minimize Security Risks
The IGS-6325 Series comes with enhanced cybersecurity to fend off cyberthreats
and cyberattacks.
The IGS-6325 Series supports SSHv2, TLS and SSL protocols to provide strong
protection against advanced threats.
Reliable Cybersecurity Switch to Protect Your PoE Network
Strengthen
TLS/SSH
Encryption
15. 15 / 49
Product Features
Fault Alarm
The feature can alert the users when there is something wrong with the
switches.
16. 16 / 49
Digital Input
Digital Input offers detection of device status via sensing login
signal.
17. 17 / 49
Digital Output
Digital Output offers detection of Power/Port failure, and then
output logic signal of High/Low voltage to trigger the external
device.
18. 18 / 49
Product Features
Wide-ranging Redundant Power Designs
AC power input and power switch
• 100~240V AC; 50/60Hz
DC power input and power switch
• 36~60V DC power input
• 1A@24V relay alarm for power down
and port down
AC Power Input DC Power Input
19. 19 / 49
Industrial Protocols
Others
Loop protection to avoid broadcast loops
Supports ERPS (Ethernet Ring Protection Switching)
IEEE 1588 and Synchronous Ethernet network timing
Provides port mirror (many-to-1)
Modbus TCP
20. 20 / 49
ITU-T G.8032 ERPS
Redundant Ring, Fast Recovery for Critical Network Applications
Complies with ITU-T G.8032 standard
10ms recovery time
21. 21 / 49
Management Features
Full Management
IPv4/IPv6 dual stack
IPv6 IP address/NTP management
Standard-based management
• Console/Telnet command line interface
• Web switch management
• SNMP v1, v2c, and v3 switch management
• SSH/SSL secure access
SNMP trap for device Link Up/Link Down status monitoring
User Privilege levels control
22. 22 / 49
CLI Benefits
Console command is Cisco-like, which allows users to make it
work easier.
23. 23 / 49
Layer 2 Features
VLAN
IEEE 802.1Q tagged VLAN
Up to 256 VLAN groups, out of 4096 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Private VLAN Edge (PVE)
MAC-based/Protocol-based/IP subnet-based/Voice VLAN
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
BPDU Guard enhances switch network reliability, manageability and
security
24. 24 / 49
Layer 2 Features
Quality of Service
8 priority queues on all switch ports
Traffic Classification by:
• 802.1p CoS
• ToS/DSCP/IP Precedence of IPv4/IPv6 packets
• IP TCP/UDP port number
• Typical network applications
Ingress shaper and egress rate limit per port bandwidth control
Strict Priority and Weighted Round Robin (WRR) CoS policies
Traffic policing on the switch port
DSCP remarking
25. 25 / 49
Security Features
Security
Network Access Authentication Mechanism
• IEEE 802.1x Port-based/MAC-based network access authentication
• IEEE 802.1x authentication with guest VLAN
• RADIUS/TACACS+ users access authentication
Access Control List (ACL)
• IP-based filtering to permit or deny traffic
• MAC-based filtering to permit or deny traffic
Management Source MAC/IP address binding to prevent unauthorized
intruder
DHCP Snooping to filter untrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC
address to IP address binding
IP Source Guard prevents IP spoofing attacks
26. 26 / 49
Management Tool Features
Management Tools
Four RMON groups (history, statistics, alarms and events)
Built-in Trivial File Transfer Protocol (TFTP) client
Firmware upload/download via HTTP/TFTP
DHCP Relay and option82
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP)
SFP-DDM (Digital Diagnostic Monitor)
Cable Diagnostic technology provides the mechanism to detect and
report potential cabling issues
PLANET Smart Discovery Utility for deployment management