IGS-5225-24P4S, a new industrial Layer 2+ managed Gigabit Switch, features 24 10/100/1000Mbps IEEE 802.3af/at PoE injector ports and 4 shared SFP ports, and supports static Layer 3 routing in a 1U case. With a total switch fabric of 48Gbps, the IGS-5225-24P4S can handle large amounts of data in a secure topology linking to an industrial backbone or high-capacity servers.
The IGS-5225-24P4S is capable of providing non-blocking switch fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts user-friendly “Front Access” design for easy wiring and maintenance of the IGS-5225-24P4S when placed in the cabinet.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
10. 10 / 48
Product Overview
24 10/100/1000BASE-T PoE+ RJ45 Ports
• IEEE 802.3af/at
• 36-watt PoE output
RS232-to-RJ45 Console Interface
• Management and setup
4 100/1000BASE-X mini-GBIC/SFP slots
• Shared with Port-21 to Port-24
• Compatible with 100BASE-FX SFP
2 x Digital Input (DI) and Digital Output (DO)
Dual DC 48~56V Power Input
11. 11 / 48
Product Overview
IP30 metal case
• Fanless design
Case grounding
19-inch rack-mountable design
12. 12 / 48
Diagram
Fanless design IP30 metal case protection 19-inch, 1U rack-mountable
13. 13 / 48
IGS-5225-24P4S
48~56V DC
Redundant
Power Input
400-watt
PoE Budget
4 RJ45/SFP
Combo
2 Digital Input
&
Digital Output
-40~75
degrees C
24 x Gigabit
PoE+
G.8032
E.R.P.S.
Ring
Key Feature
15. 15 / 48
Wide-ranging Redundant Power Designs
DC power input and power switch
• 48~56V DC power input
• 1A@24V relay alarm for power down and port down
Power Input
DC Power Input
16. 16 / 48
Fault Alarm
OR
The IGS-5225-24P4S supports a Fault Alarm feature which can alert the users when there is
something wrong with the switches. With this ideal feature, the users would not have to waste
time to find where the problem is. It will help to save time and human resource.
17. 17 / 48
Digital Input Configuration
Digital Output Configuration
Digital Input & Digital Output
18. 18 / 48
Digital Input
Digital Input offers detection of environment device status via sensing login signal
from high to low or from low to high, and then system is going to log message to
local, remote log server, or alarm message via SNMP trap or SMTP with
customized error message.
19. 19 / 48
Power Failure
Alarm is
triggered
Port Failure
Alarm is
triggered
Digital Output
Digital Output offers the detection of the IGS-5225-24P4S power failure or port
failure, and then outputs logic High/Low signal to trigger the performance of the
external device.
20. 20 / 48
ITU-T G.8032 E.R.P.S.
Redundant Ring, Fast Recovery for Critical Network Applications
Complies with ITU-T G.8032 standard
50ms recovery time
25. 25 / 48
Advanced Intelligent Power/PD Management Functions
PD Alive Check
E-mail/SNMP Trap Event Alert
Over Temperature Protection
Scheduled Power Recycling
PoE Power Schedule
PoE Usage Status Graphics
PoE Port Sequence
Intelligent PoE Management Functions
26. 26 / 48
Intelligent Powered Device Alive-Check
The IGS-5225-24P4S can be configured to monitor connected PD (Powered
Device) status in real time via ping action.
Once the PD stops working and responding, the IGS-5225-24P4S will resume the
PoE port power and bring the PD back to work.
PD Status
Good!
……
Alarm Notification PD is Back
Alive!
PD Alive Check
Check alive status for 3 times
Restart PoE device if without response
27. 27 / 48
Real-time Event Alarm
SNMP Trap/Syslog/Email notification
• PoE Port Link Fault Alarm
• Temperature Threshold Alarm
• PoE Usage Alarm
SNMP Trap
Receiver
Syslog Server
Email Server
PoE IP
Surveillance
Warning
Warning
Link FAILED
Event Alarm
29. 29 / 48
PoE Schedule is a PoE management function where PoE device is
scheduled to turn on or turn off, thus saving electricity rate.
4 Profiles
Per Hour & Min.
setting
PoE Schedule
Per Week
Day setting
Daily Work
Daily Work
Power Consumption
Off-Business
Hours
Off-Business Power Saving
31. 31 / 48
Hardware
24 x 10/100/1000BASE-T RJ45 ports with 802.3af/at PoE injector function
4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with
100BASE-FX SFP
48Gbps/non-blocking switch fabric
Dual 48V~56V DC redundant power (>53V DC for PoE+ output recommended)
Maximum 400-watt PoE budget
Supports PoE power up to 36 watts for each PoE port
2 digital input and digital output
IP30 metal case protection
-40 to 75 degrees C operating temperature
9K bytes jumbo frame
8K MAC address entries
19-inch rack-mountable design
Hardware Features
32. 32 / 48
Full Management
IPv4/IPv6 dual stack
IPv6 IP address/NTP/DNS management
Standard-based management
• Web-based
• Telnet
• SNMP v1 and v2c
• Console Command Line
Security Authentication for Secure Management
• SSH
• SSL
• SNMPv3
SNMP RMON 1 and 2 for in/out network traffic and event monitoring
SNMP trap for device Link Up/Link Down status monitoring
User Privilege levels control
Management Features
33. 33 / 48
VLAN
IEEE 802.1Q tagged VLAN
Up to 255 VLAN groups, out of 4095 VLAN IDs
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
Private VLAN Edge (PVE)
MAC-based/Protocol-based VLAN/Voice VLAN
Spanning Tree Protocol
STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol)
BPDU Guard and BPDU Filtering enhance switch network reliability, manageability and
security
E.R.P.S (Ethernet Ring Protection Switching)
Complies with ITU-T G.8032 standard
Recovery time < 50ms
Layer 2 Features
34. 34 / 48
Security
Network Access Authentication Mechanism
• IEEE 802.1x Port-based authentication for user identity control
• MAC-based authentication for easy deployment
• RADIUS/TACACS+/Local profile
Access Control List (ACL)
• IP-based filtering to permit or deny traffic
• MAC-based filtering to permit or deny traffic
Management Source MAC/IP address binding to prevent unauthorized intruder
DHCP Snooping to filter untrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP
address binding
IP Source Guard prevents IP spoofing attacks
Security Features
35. 35 / 48
Management Tools
Four RMON groups (history, statistics, alarms and events)
IPv6 IP address/NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
Firmware upload/download via HTTP/TFTP
DHCP Relay
DHCP Option82
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP)
SFP-DDM (Digital Diagnostic Monitor)
Cable Diagnostic technology provides the mechanism to detect and report potential
cabling issues
PLANET Smart Discovery Utility for deployment management
Management Tool Features