POE-E304 is a 1-port 95W 802.3bt PoE++ to 4-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE applications.
The POE-E304 can obtain a maximum of 95-watt PoE power from IEEE 802.3bt PoE input port and supplies a maximum of 65-watt PoE power budget to four PoE output ports, extending the simultaneous transmission distance of both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to 200 meters.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
3. 3 / 34
PoE Introduction
Definition of Power over Ethernet Standard
2003
2009
2019
4. 4 / 34
PoE Introduction
PoE – Power over Ethernet
PoE technology describes a system to safely transfer electrical power,
along with data, to remote devices over standard UTP in an Ethernet
network.
It does not require modification of existing Ethernet cabling
infrastructure.
• IEEE 802.3bt PoE, up to 95 watts
• IEEE 802.3at PoE, up to 30 watts
• IEEE 802.3af PoE, up to 15.4 watts
• PoE Equipment
– PSE (Power Source Equipment)
– PD (Powered Device)
5. 5 / 34
PoE Introduction
PSE (Power Source Equipment)
Inject Power over Ethernet
PD (Powered Device)
Get power over Ethernet cable
PoE Switch PoE Injector Hub PoE Injector
Wireless AP
IP Camera VoIP Phone PoE Splitter
6. 6 / 34
PoE Introduction
The Limitation of UTP Cable
TIA/EIA 568b1: Maximum segment length of 100 meters (328 feet).
PoE installation:
PSE
PD
Power
Data
100 meters
A cable length of only 100 meters is not able to meet a wide
range of IP Surveillance/Wireless AP deployments.
7. 7 / 34
PSE
PD
Power
Data
100 meters
PSE
PD
Power
Data
100 meters
POE-E304
PoE Introduction
The PoE Extender Solution
Extends Cat5e/6 UTP cabling distance to 200 meters
8. 8 / 34
The PLANET PoE Extenders Family
Point to Point Point to Multipoint
Ultra/IEEE
802.3bt
IEEE
802.3at
IEEE
802.3af
POE-E101
• 1 x 15.4W PD port
• 1 PSE port
• Fast Ethernet
• 0~50 degrees C
POE-E201
• 1 x 30W PD port
• 1 PSE port
• Gigabit Ethernet
• 0~50 degrees C
IPOE-E174
• 1 x 60W PD port
• 4 PSE ports
• Gigabit Ethernet
• -40~75 degrees C
• IP30 metal case
IPOE-E172
• 1 x 95W PD port
• 2 PSE ports
• Gigabit Ethernet
• -40~75 degrees C
• IP63 rating
New Phase-in
Available
POE-E202
• 1 x 30W PD port
• 2 PSE ports
• Gigabit Ethernet
• 0~50 degrees C
POE-E304
• 1 x 95W PD port
• 4 PSE ports
• Gigabit Ethernet
• 0~50 degrees C
9. 9 / 34
Product Overview
Front Panel
1-port 10/100/1000T data + power input
• IEEE 802.3bt or 4-pair Power over Ethernet Plus end-span/mid-span PD
• Supports PoE input power up to 95 watts
• Embedded LEDs on RJ45 port for speed, LNK/ACT
4-port 10/100/1000T data + power output
• IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE
• Up to 2 IEEE 802.3af/802.3at devices powered with PoE power up to 32 watts
• Embedded LEDs on RJ45 port for speed, LNK/ACT, PoE-in-Use
10. 10 / 34
Product Overview
Front Panel
Power
• To indicate the device is power on
11. 11 / 34
Product Overview
Rear Panel
DC jack
• One DC power jack
Ground
Power Requirement
• PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within
50V-56V DC
• External DC: 50V-56V DC
13. 13 / 34
Product Benefits
As required by customers
No external power
cable installation
required
Desktop-size
metal case
Plug & Play
Cost Effectiveness
Breaking RJ45 100m
limitation – PoE
Extender Solution
POE-E304
14. 14 / 34
Product Benefits
Simple installation
Plug and Play
15. 15 / 34
Product Benefits
Connect the UTP cable from 95W
802.3bt PoE injector/switch to PoE
IN port of POE-E304
Connect the UTP cables from
PoE Out ports of POE-E304 to
802.3af/at PDs
16. 16 / 34
Product Features
Hardware
5 10/100/1000BASE-T RJ45 interfaces
• 1-port Data + Power input
– Complies with IEEE 802.3bt Power over Ethernet end-span and mid-span
PDs
– Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span
PD
– Supports PoE input power up to 95 watts
• 4-port Data + Power output
– Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span
PSE
– Up to 4 IEEE 802.3af/802.3at devices powered
– Supports PoE power up to 32 watts for each PoE port
17. 17 / 34
Product Features
Hardware
No external power cable installation required
Metal desktop size, wall mountable
LED indicators for power-in-use LED, Power LED and LNK/ACT LED
(10/100/1000Mbps)
0 ~ 50 degrees C operating temperature
Plug & Play installation
Power Requirements
PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage
within 50V-56V DC
External DC: 50V~56V DC
18. 18 / 34
Product Features
Power over Ethernet
PoE In port, IEEE 802.3bt or 4-pair 802.3at PoE+
PoE In port power pin assignment:
• 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
• 1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
PoE Out port, IEEE 802.3af/at Power over Ethernet Plus end-span PSE
PoE Out port power pin assignment, 1/2 (+), 3/6 (-)
Auto detects powered device and consumption levels
Extends the range of PoE to an additional 100 meters (328ft.)
19. 19 / 34
Product Features
Power over Ethernet
Power Source PoE Output Budget Max. Number of PDs supported
IEEE 802.3bt
PoE++ PSE
65 watts max.
Class 4 PD@25-watt 2 units
Class 3 PD@15-watt 4 units
Class 2 PD@7-watt 4 units
IEEE 802.3at PoE+
PSE
25 watts max.
Class 4 PD@25-watt 1 unit
Class 3 PD@15-watt 1 unit
Class 2 PD@7-watt 3 units
PLANET External
55V DC
65 watts max.
Class 4 PD@25-watt 2 units
Class 3 PD@15-watt 4 units
Class 2 PD@7-watt 4 units