IGT-2205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with two 10/100/1000BASE-T RJ45 copper port and two 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-2205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
9. 9
Gigabit
Ethernet
Fast
Ethernet
Unmanaged Managed
Industrial DIN-rail Ethernet Converter
Products Family
IGT-805AT
• 10/100/1000T
• 100/1000X
• 12 to 48V DC
New Phase-in
Available
IFT-802T / IFT-802TS15 / IFT-805AT
• 1 10/100BASE-T RJ45
• 1 100BASE-FX SC interface for IFT-802T
• 1 100BASE-FX SC interface for IFT-802TS15
• 1 SFP port for IFT-805AT
• -40 to 75 degrees C
IGT-815AT
• 10/100/1000T
• 100/1000X
• LFP DIP switch
• 9~48V DC, AC 24V
• Compact-sized
PoE+ and PoE++
IGTP-80xT Series
• 10/100/1000T PoE+
to 100/1000X
• 12~48V DC, AC 24V
IGTP-815AT
• 10/100/1000T
• 30W 802.3at PoE+
• 100/1000X SFP
• 48~56V DC
• Compact-sized
IGT-905A
• 10/100/1000T
• 1000X SFP
• Web and SNMP Managed
• 12 to 48V DC
IGUP-1205AT / IGUP-2205AT
• 2 port 802.3bt PoE++ out
• 2 100/1000X SFP
• 12~56V DC power booster
IGUP-805AT
• 1 port 802.3bt PoE++ out
• 1 100/1000X SFP
• 12~56V DC power booster
IGT-1205AT
• 1 10/100/1000T
• 2 100/1000X
• Redundant fiber port
• 12 to 48V DC
IGT-2205AT
• 2 10/100/1000T
• 2 100/1000/2500X
• DIP switch
• Redundant fiber port
• 12~48V DC, AC 24V
10. 10
Model IGT-1205AT IGT-2205AT
Photo
Hardware Specifications
RJ45 Port 1 x 10/100/1000BASE-T Port 2 x 10/100/1000BASE-T Port
SFP Port 2 x 100/1000BASE-X Ports 2 x 100/1000/2500BASE-X Ports
DIP Switch
DIP-1: SFP Port 5 1000BASE-X (default) / 100BASE-FX
DIP-2: SFP Port 6 1000BASE-X (default) / 100BASE-FX
DIP-3: Switch mode / Fiber Redundancy mode
DIP-On: Fiber Redundancy mode
DIP-Off (default): Switch mode
Dimensions 32 x 87 x 135mm
Power Requirement DC 12~48V or AC 24V, Redundant power
Installation DIN-rail kit and wall-mount ear
Case IP30 metal case
Protection 6KV ESD
Temperature -40~75 degrees C
Comparison Table
11. 11
Comparison Table
Model IGT-1205AT IGT-2205AT
Photo
Switch Specifications
Switch Processing Scheme Store-and-Forward Store-and-Forward
MAC Address Table 1K 4K
Flow Control
Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Switch Fabric 6Gbps 18Gbps
Throughput (Packet per
second)
4.46Mpps@64bytes 8.93Mpps@64bytes
Maximum Transmit Unit 9K bytes 12K bytes
Auto MDI / MDIX Yes Yes
13. 13
Product Overview
LEDs
• Power 1/2 and Alarm
2 x 100/1000/2500BASE-X
SFP ports
2 x 10/100/1000BASET
RJ45 port
★ Although 2.5G LED is a bi-color light,
the actual color is close to Amber.
14. 14
Product Overview
6-pin Removable Terminal Block /
12~48V DC or 24V AC
redundant power input
DIP Switch
Case
Grounding
1 2 3 4 5 6
Power 1 Alarm Power 2
+ - + -
19. 19
Product Benefits
As required by customers
Up to
2.5G
Increased Bandwidth
Fiber-optic Link
Extends the Range of
Network Deployment
Plug & Play
Cost Effectiveness
DIP Switch
Redundant Fiber Port
IGT-2205AT
23. 23
Redundant Link Fiber
(Disable)
Product Features
Advanced Fiber Redundancy
When Primary-Port is active at a time, the Backup-Port is blocked.
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically.
When Primary-Port is back to link-up, the traffic will swap from Backup-Port to Primary-Port.
Rapid Fiber Redundancy
Link Fail
Primary Link Fiber
(Forwarding)
Redundant Link Fiber
(Forwarding)
Primary Link Fiber
(Disconnected)
24. 24
Extends the Range of Network Deployment
Distance extends up to 240km
Cascaded Fiber Optic Link
120km
120km
25. 25
Product Features
Hardware
2 x 10/100/1000BASE-T RJ45 ports, auto MDI/MDI-X
2 x 100/1G/2.5GBASE-X SFP interfaces (Port-1 and Port-2)
12K bytes jumbo frame
14Gbps switch fabric
4K MAC address table, auto-aging
-40 to 75 degrees C operating temperature
IP30 metal case
6KV DC Ethernet ESD protection
DIN-rail and wall-mount designs
DC 12~48V or AC 24V, redundant power with reverse polarity protection
28. 28
Applications
Redundancy Applications
The IGT-2205AT provides rapid fiber redundancy of link for highly critical Ethernet applications.
The redundant mode supports auto-recover function. If the destination port of a packet is link-down, it
will forward the packet to the other port of the backup pair.
Rapid Fiber Redundancy
29. 29
BluBoxx Communication Pvt. Ltd.
102/B, Surekha Apartment, Pune Satara Road,
Pune-411037. Maharashtra, India.
Tel: +91-7875432180, Email: sales@bbcpl.in
www.bbcpl.in