This document provides an overview and description of the IGS-6325-24P4X and IGS-6325-24P4S industrial managed switches. The switches provide 24 Gigabit Ethernet ports that support PoE+, 4 SFP/SFP+ ports, layer 3 routing, quality of service, security features, and management functions. They are suitable for applications including surveillance, transportation, building automation, and energy.
13. 13 / 62
Product Features
Layer 3 Routing
Supports maximum 128 VLAN interfaces
Supports maximum 128 routing entries
IPv4/IPv6 hardware static routing
IP Domain A
192.168.1.x
IP Domain B
192.168.2.x
Data
Data
IP Domain C
192.168.3.x
Data Data
15. 15 / 62
Industrial Cybersecurity Switch
Build Cybersecurity Network to Minimize Security Risks
The IGS-6325 series comes with enhanced cybersecurity to fend off
cyberthreats and cyberattacks.
It supports SSHv2, TLS and SSL protocols to provide strong protection
against advanced threats.
17. 17 / 62
Searching
ONVIF Feature
ONVIF Support
One click to search and show all of the ONVIF devices
Upload floor images to switch to know where the location of each
surveillance device is.
Get real-time surveillance’s information and online/offline status
Allows PoE reboot control
18. 18 / 62
Adding Done
4
Searching ONVIF Devices
1
Show All ONVIF Devices
2 Adding All ONVIF Devices
3
ONVIF – Search and Add
One click to search, show and add all of the ONVIF devices
19. 19 / 62
Get real-time surveillance’s information and online/offline status
Allows PoE reboot control
Online/offline status
Online/offline status
Real-time information
Access/reboot/delete
ONVIF – Device List
20. 20 / 62
ONVIF – Floor Map
Upload map images to switch
Know the location of each surveillance device being deployed
Real-time surveillance’s information and snapshot
21. 21 / 62
Intelligent PoE Management Functions
Advanced Intelligent Power/PD Management Functions
PD Alive Check
E-mail/SNMP Trap Event Alert
Over Temperature Protection
Scheduled Power Recycling
PoE Power Schedule
PoE Usage Status Graphics
PoE Port Sequence
22. 22 / 62
Real-time power device status
Monitor connected PD status; if
disconnected, the PoE port power can
be resumed immediately to bring the
PD back to work.
PoE devices are scheduled to turn off
or on for saving electricity while not in
use.
Unique PoE+ Management
Real-time
PoE Status
PoE Schedule for
Energy Saving
PD Alive Check
23. 23 / 62
Event Alarm
Real-time Event Alarm
SNMP Trap/Syslog/Email notification
• PoE Port Link Fault Alarm
• Temperature Threshold Alarm
• PoE Usage Alarm
PoE IP
Surveillance
Link FAILED
25. 25 / 62
Power Input
Redundant Power Design
PWR1 & PWR2 48~56V DC redundant power input
1A@24V relay alarm for power down and port down
Reverse power polarity protection
Connective fixed terminal block for primary and backup power
26. 26 / 62
OR
Fault Alarm
The IGS-6325 series supports a Fault Alarm feature which can alert
the users when there is something wrong with the switches. With
this ideal feature, the users would not have to waste time to find
where the problem is. It will help to save time and human resource.
27. 27 / 62
Digital Input Configuration
Digital Output Configuration
Digital Input & Digital Output
28. 28 / 62
Digital Input
Digital Input offers detection of device status via sensing login
signal from high to low or from low to high. When the door is
detected to be opened, an alarm messaging will be sent out via
SNMP trap or SMTP.
29. 29 / 62
Power Failure Trigger
Alarm Port Failure
Trigger
Alarm
Digital Output
Digital Output offers detection of IGS-6325 series power failure or
port failure, and then output logic signal to trigger an alarm.
30. 30 / 62
ITU-T G.8032 ERPS
Redundant Ring, Fast Recovery for Critical Network Applications
Complies with ITU-T G.8032 standard
Recovery time of 10ms
31. 31 / 62
ERPS Ring
Up/Down Link
Advantages of 4 Fiber Interfaces
The switch with 2 fiber interfaces cannot make ERPS Ring and
Up/Down Link happen at the same time like the diagrams shown
below.
32. 32 / 62
Advantages of 4 Fiber Interfaces
The IGS-6325-24P4X/IGS-6325-24P4S with 4 long-distance fiber
interfaces can make ERPS Ring and Up/Down Link happen at the
same time as the diagram shown below.
ERPS Ring
Uplink
Downlink
33. 33 / 62
IEEE 1588 PTPv2
1588 Precision Time Protocol for Industrial Computing Networks
The IGS-6325 series is intended for Telecom and Carrier Ethernet
applications, supporting MEF service delivery and timing over packet
solutions for IEEE 1588 and Synchronous Ethernet.
PTP PTP
PTP
PTP
34. 34 / 62
Management Features
Full Management
IPv4/IPv6 dual stack
IPv6 IP address/NTP/DNS management
Standard-based management
• Web-based
• Telnet and Console Command Line
• SNMP v1 and v2c
35. 35 / 62
Management Features
Full Management
Security Authentication for Secure Management
• SSH
• SSL/TLS
• SNMPv3
SNMP RMON 1 and 2 for in/out network traffic and event monitoring
SNMP trap for device Link Up/Link Down status monitoring
User Privilege levels control
36. 36 / 62
Layer 2 Features
Quality of Service
8 priority queues on all switch ports
Traffic Classification by:
• 802.1p CoS
• IP TOS/DSCP/Precedence of IPv4/IPv6 packets
• IP TCP/UDP port number
• Typical network applications
Ingress Shaper and Egress Rate Limit per port bandwidth control
Strict Priority and Weighted Round Robin (WRR) CoS policies
Traffic-policing on the switch port
DSCP Remarking
37. 37 / 62
Layer 2 Features
Multicast
Supports IGMP Snooping v1, v2 and v3
Supports MLD Snooping v1 and v2
Querier mode support
IGMP Snooping filtering
MLD Snooping filtering
MVR (Multicast VLAN Registration)
Supports Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
14 trunk groups, up to 16 ports per trunk group
Up to 32Gbps bandwidth (full duplex mode)
38. 38 / 62
Security Features
Security
Network Access Authentication Mechanism
• IEEE 802.1x Port-based authentication for user identity control
• MAC-based authentication for easy deployment
• RADIUS/TACACS+/Local profile
Access Control List (ACL)
• IP-based filtering to permit or deny traffic
• MAC-based filtering to permit or deny traffic
Management Source MAC/IP address binding to prevent unauthorized
intruder
DHCP Snooping to filter untrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC
address to IP address binding
IP Source Guard prevents IP spoofing attacks
39. 39 / 62
Management Tool Features
Management Tools
Four RMON groups (history, statistics, alarms and events)
IPv6 IP Address/NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
Firmware upload/download via HTTP/TFTP
DHCP Relay/DHCP Option82
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP)
SFP-DDM (Digital Diagnostic Monitor)
Cable Diagnostic technology provides the mechanism to detect and
report potential cabling issues
PLANET Smart Discovery Utility for deployment management
40. 40 / 62
Applications
Provides up to 24 PoE+ ports to make the installation of IP cameras
or wireless AP easier and more efficient.
41. BluBoxx Communication Pvt. Ltd.
102/B, Surekha Apartment, Pune Satara Road,
Pune-411037. Maharashtra, India.
Tel: +91-7875432180, Email: sales@bbcpl.in
www.bbcpl.in