useful for anyone at home/office.....based on info in publications.

1. By
Energetic Dr.Bala
www.visionunlimited.in

2. Fan at home
• Use light
weight/high power
fans.
• Use electronic
regulators for less
cost
• Avoid rewinding
motors
• Clean fan blades
often
• Apply oil in the fan

3. Grinder at home
• Use high power
motors in the
grinders
• See that your
grinders have nylon
belts
• Use the grinder to
the full power and
energy
• Clean the grinder
often and apply oil in

4. AC at home
• Select an appropriate size
of the AC unit according
to the room size.
• Close the doors of the
rooms with AC
• Clean the filters of the AC
frequently
• See that there is no air
going out of the room
• Keep the AC always in 25
deg C.
• When you replace your old
AC always look for AC with
Star mark for better
power and energy…

5. Iron box at home
• Never iron the
clothes one by one…..
Try and plan for
more clothes at a
time.
• Switch off the Iron
Box then and there.

6. Refrigerator at home
• Always keep the Fridge little
away from the wall and let
there by some ventilation.
• Avoid opening and closing of
doors of the fridge.
• Avoid keeping hot/warm
products in the fridge… wait
for the products to come to
room temperature…
• Defrost often to avoid ice
formation…
• Buy “Star” marked fridges for
power save
• Adjust the thermostat
instrument of the fridge
according to the room or
outside temperature

7. Motor pumps at home
• Use high power motor
pumps for efficiency
• Use PVC pipes/avoid
GI pipes
• Avoid water leakages
in the pipes
• Add capacitors in the
water pump motor
• Avoid water tank over
flowing… use relevant
instruments to
indicate the same….

8. Water heaters at home
• Avoid water leakages
in the water pipes
• Try solar heaters if
possible
• Try to put on safety
cover on to hot
water pipes…

9. Computers at home
• When not in use switch off
computers.
• If a PC runs for 24 hrs, it
consumes more electricity
than the AC
• Put on monitor of the PC
when not required or not in
use
• Sleep mode
computers/monitors save
40% power
• Switching on/off of the PC
according to requirement
saves power and provides