1. ARIEL L. AWAYAN
Objective: Information profile: To be parts of globally competitive company and to
enhance further my knowledge in my expertise.
Scope of Responsibilities:
More than twenty years of experience in supervising all aspects of the Piping and
Structural works ensuring that is carried out in accordance with the relevant Company
and Statutory requirements. Co-ordinate and direct all the activities to the Fabrication
Contractor and Fabrication Personnel which includes structural fabrications, pipe fitting,
marine fabrications and welding activities in able to meet execution plan. Ensure that
safety policies and procedures are adhered to consistently, minimizing risk to personnel.
Handle all classes of pipes and structural steels to be used for fabrication and erection
of pipe racks, jackets and modules. Requesting all the materials needed for all drawings
received. Coordinate with other supervisors in order to know the work of priority. Support
the review and swift resolution of Site Queries and Technical deviation request. Ensure
that all construction aspects of the project on the site are supervised in a safe and
efficient manner.
Position Competencies:
Action Oriented - Enjoys working hard; is action oriented and full of energy for the
things sees as challenging
Dealing with Ambiguity - Can effectively cope with change; can decide and act without
having the total picture;
Approachability - Easy to approach and talk to; spends extra effort to put others at
ease; can be warm, pleasant, and gracious; is sensitive to and patient with the
interpersonal anxieties of others;
Informing - Provides the information people need to know to do their jobs and to feel
good about being a member of the team or unit; provides individuals information so that
they can make accurate decisions; is timely with information
44-B, As – is, Bauan
Batangas, Philippines 4201
Tel.: +639391461323
E-Mail Add.: arielga123@yahoo.com.ph

2. Listening - Practices attentive and active listening; has the patience to hear people out;
can accurately restate the opinions of others.
Planning - Accurately scopes out length and difficulty of tasks and projects; anticipates
and adjusts for problems and roadblocks; evaluates results
Problem Solving - Uses rigorous logic and methods to solve problems with effective
solutions; looks beyond the obvious and doesn’t stop at the first answers;
EXPERIENCES;
10/1213 – 07/02/15 ERSAI Caspian contractor LLC
Saipem Branch” Republic of Kazakhstan
Ersai Fabrication Yard
Structural Pre-Fabrication Supervisor
DUTIES
• Inspect work progress, equipment, or construction sites to verify safety or to
ensure that specifications are met.
• Analyzed engineering documentation (Drawings, Procedures - Specification -
Quality Control Plan)
• Jack case and leg erection, including alignment.
• Pipe rack and steel structural buildings erection.
• Undertake inspection & monitoring activities in accordance with relevant standard
to ensure compliance with Project Procedures, Specifications and International
Codes.
• Monitor and manage the structural works in term of time and quality to achieve
Project targets.
• Ensure that the manpower, equipment, tools, materials and design necessary to
support schedule will be available.
21/05/13 – 16/10/13 SAIPEM Astrakhan
Astrakhan Russia
Filanovsky Projectt
Mechanical Plant Supervisor
DUTIES:
Supervise contractor the fabrication and installation of platform to be used in offshore.
Report all the anomalies of the contractor to the project in charges. Do some inspection
in able to monitor if the contractor are following to project procedures at complying to
the project specification.
In offshore I am in charges in installation of piles and do the cutting and fit-up the add
on pile to the lead piles 84” pipe. Fabricate some special tools that necessary in the
project. Supervise the dismantling or transportation frame that use for navigation of the
platform. Coordinate to the project superintendent for what are the missing materials
and consumables. Perform every day toolbox talk and implement safety procedures.
12/11/2010 - 20/05/13 ERSAI Caspian contractor LLC
“Saipem Branch” Republic of Kazakhstan

3. Offshore Division
Pre-Fabrication Supervisor
DUTIES:
Plan and coordinate the production efforts of direct supervisors under his supervision
and motivate them to accomplish the work safely, correctly and efficiently. Provides
liaison between field engineers and crafts to ensure construction complies with
drawings and specifications. Implement scheduling/planning, cost controls and
equipment systems.
•Read and understand drawings, contract plans and specifications.
•Examine/inspect field conditions and identify problems, inaccuracies, and cost saving
measures that arise or that may be encountered. Take corrective actions as needed.
•Understand and implement lockout/tag out procedures in a safe manner.
•Form and lead an effective area or discipline team, delegate responsibilities and set
goals.
•Develop and maintain open communications with crews, Field Engineers/Coordinators,
Safety QA/QC and clients.
•With the involvement of with general foremen/foremen, developed and maintain a plan
and schedule of work based on the project master plan;
•Ensure that the manpower, equipment, tools, materials and design necessary to
support schedule will be available.
•Promote concern for the safety and welfare of all employees.
•Monitor the unit man-hour performance report on a weekly basis.
•Inform the supervisors of the productivity needs.
20/05/2001 – 11/11/2010 ERSAI Caspian contractor LLC
“Saipem Branch” Republic of Kazakhstan
Ersai Fabrication Yard
Piping Pre-Fabrication Supervisor
DUTIES;
To plan project activities and ensure:
- deadlines are met
- allocate activities and resources
- monitor project progress
- interface with QC, Safety, Engineering, Procurement
- estimated costs/ manpower are not exceeding
- achieve target margins on jobs & productivity is maintained to its highest standard
- overall housekeeping of the respective areas of work
- discipline and adherence to the polices of company by the taskforce
Check daily the work progress and inspect completed work to ensure conformity with
established standard. Inspect work performed if complying with established
specifications and standards.

4. Review weekly schedules and coordinate running of schedules through Project
Coordinators daily.
Take proactive approach in reducing scrap levels by analyzing daily and weekly scrap
data by equipment and focusing resources on effective changeovers and consistent
machine set up and operation.
09/05/2000 – 31/10/2000 TMP MDK Equatorial Guinea
Piping Supervisor
DUTIES
Assigned in Project Completion Team as in charge for certification department
(contractor side), preparing all necessary documents in order the system and sub
system be cleared and certified.
Complete Request for Inspection (RFI) for:
• Test Package release records
• Pressure test records
• Pretest components removal
• Pressure recording charts
• Pretest check lists
• Punch lists
• Pipe cleaning and flushing reports
• Post test reinstatement
• Bolt tensioning records
Carried out TRI PARTY WALK DOWN together with Project Development Team and
commissioning representatives prior to final inspection and hand over.
Cleared all technical punch lists while the system is in trial period.
04/07/1999 – 15/11/1999 Atlantic Gulp and Pacific Batangas Philippines
Piping Supervisor
DUTIES
Handle erection of fabricated spools in certain areas such as: pipe racks, compressor
area and trunk line inlet manifold. Supervise all piping works and support installations in
accordance with the installation and welding procedures. Ensured that all the drawings
on hand were all in latest revision such as isometric general arrangement and
orthographic. Monitor all arriving spools and fabricated steel in able to prepare a day
ahead plan. Arrange for and ensure that tools, equipment, spare parts and other
materials are available and working at all times and initiates list of spare parts and
materials for replenishment of stock. Perform toolbox meeting.
Directly reports to superintendent / section engineers responsibilities for quality of
workmanship. Coordinating with other designated project personnel-in–charge
regarding supply and demand. Verify and ensure that all materials received complied
with their specifications and standards. Recommend to implement new system of idea

5. and work technology that can help to increase the production of the responsible area.
Relays unsolved problems encountered to superintendent or his designated assistant
for their immediate action. Raise site query for the agreed solution.
11/01/1997 – 05/02/1999 “Saipem” Dammam Saudi Arabia
Pipe Fitter Foreman
DUTIES
Completes pre-fabrication, assemble piping and structural members, and report any
anomalies or interference to the superior. Inform any construction variations, providing
the superior with all data for approval and accounting of extra items. Received work
orders and determines priorities based on work schedules and commitments, determine
extent of work and other requirements, obtain appropriate materials, special tools and
equipment as required, assign tradesmen to the various jobs and provide necessary
technical instructions.
Receive drawings, material list and instructions required for work. Inspects documents
and collects materials. Check that materials are complying with specifications and report
any missing item in order to complete the job. Divides materials for use during pre-
fabrication and use during assembly, cut down and assemble piping during pre-
fabrication. Ensure quality and speed of work - delays will result in a loss of production.
Assist to developing work pack quantities and planning, fabrications. Coordinating the
works and the team, relates to the Supervisor, and responsible for the performance of
the team. During Supervisor absence I replace him for short periods. Provide Tool Box
Talks (TBT) and JSA as required by the nature of the job. Ensure the preparation of the
tools to perform the task and activity.
03/08/1996 – 04/01/1997 V. Magnaye Construction Manila Philippines
Structural Foreman
DUTIES
Supervise activities and lead the erectors team. Segregate fabricated steels as per
prints receive prior for erection. Ensure that the equipment used for the job is safe for
use, in a good state of maintenance and provided with the required protections. Keep
the work areas tidy and clean. Perform emergency duties as may be directed. Ensure
that only certified gear is used during lifting operations.
20/01/1996 – 26/06/1996 “CCC” (Sal) Doha Qatar
Charge Hand Piping
DUTIES
Supervise activities and lead the pipe fitters team. Checks the work carried out by other
pipe operators, upon the superior’s request ensuring total compliance with quality and
safety procedures and standards. Carries lay out marking, pre-fabrication and assembly
activities for carbon steel, alloy steel and stainless steel piping, etc. In charge on ground
assembly of fabricated spools prior for erection.

6. 02/09/1991 – 22/12/1995 “NGCC” Rahima Saudi Arabia
Fabricator / Line Checker
DUTIES
Perform line checking and tracking of line in able to identify which are missing in the
whole test pack. Do the punch listing and record the findings in able to extend the punch
to construction department. Coordinate to testing group when the punches are cleared.
Calculate pipe runs to include water, pneumatic, lube and hydraulic oil,
steam vents and drains, install all kinds of valves and fittings. Work on Small
Bore, Large Bore, carbon grades and P Grades, etc. Fit up and align pipe
fittings as per ASME B 31.1 code welding. Capable to read isometric and
optometric drawing. Intimate with rigging and lifting plans and procedures.
Certified rigger of Saudi Aramco.
Personal Data:
Married to Hayde Awayan
Mechanical Engineering graduate
Pass in Bossiet training course
Pass in H2S training course
Permit Issuer and Receiver

7. 02/09/1991 – 22/12/1995 “NGCC” Rahima Saudi Arabia
Fabricator / Line Checker
DUTIES
Perform line checking and tracking of line in able to identify which are missing in the
whole test pack. Do the punch listing and record the findings in able to extend the punch
to construction department. Coordinate to testing group when the punches are cleared.
Calculate pipe runs to include water, pneumatic, lube and hydraulic oil,
steam vents and drains, install all kinds of valves and fittings. Work on Small
Bore, Large Bore, carbon grades and P Grades, etc. Fit up and align pipe
fittings as per ASME B 31.1 code welding. Capable to read isometric and
optometric drawing. Intimate with rigging and lifting plans and procedures.
Certified rigger of Saudi Aramco.
Personal Data:
Married to Hayde Awayan
Mechanical Engineering graduate
Pass in Bossiet training course
Pass in H2S training course
Permit Issuer and Receiver