OMIJIE ehinomen prince Reviewed cv

PERSONAL DETAILS:
Name : OMIJIE EHINOMEN PRINCE
Nationality : NIGERIAN
Mobile Number : +234-8184297532 / 08036591890
Email Address : omijieehinomenprince@gmail.com
Contact Address : No 1 Inegbenebor Lane off Imade Street off Sapele
Road Benin City Edo State, Nigeria.
SUMMARY OF EXPERIENCE
Omijie Ehinomen Prince is a QAQC/Material Control & Preservation Engineer with
over 8years of Quality Control Inspection / Material handling activities both on welding,
piping Fabrication, excavation, corrosion control (painting/coating & blasting) With a
depth knowledge in construction activities mainly in the production of Barge, Piping &
manifolds, pressure vessels, pipeline and its related activities, Tanks and Steel
Structures with applicable codes, standards and specification such as ASME VIII & IX,
AWS D1.1, API 1104, etc
EDUCATIONAL QUALIFICATION:
Enugu State University of Science and Technology (EUST).
MSC in Metallurgical/Material Corrosion Engineering……………...……..…………..…. (On going)
Enugu State University of Science and Technology. (EUST).
B. Eng. (2nd class Hon.) Material/Metallurgical Engineering……………................................ (2005)
Annunciation Catholic College (ACC) Irrua......................................................... (1997)
Elders Stand Primary School, Warri...................................................................... (1990)
PROFESSIONAL & INTERNATIONAL CERTIFICATION:
(1) MoodyInternationalLtd (Nigeria)
Certified Welding Inspector (AWS.CWI)…….…………………............. (Dec-2012)
(2) Trinity Institute of NDT Technology
i. Certified Radiographical film Interpretation (RT)………...…… (Oct-2012 )
ii. Certified Visual Testing (VT)…….…...……………………...…. (Oct-2012 )
iii. Certified Magnetic Particle Testing (MPT)…………………..... (Oct-2012 )
iv. Certified Liquid Penetrating Testing (PT) ……………..…....… (Oct-2012 )
(3) Patrice Top Trio Nig. Ltd.
Certified (Internal) QMS on ISO 9001:2008………….………………... (Aug.2013)
(4) Gennesaret Resources Nigeria Limited
CURRICULUM VITAE

Basic Health & Safety Training……………………………………………. (May-2015)
(5) Instituted Of Safety Professional Of Nigeria (ISPON)……………………….(Jun. 2016)
HSE Level III
PROFESSIONAL TRAININGS
(1) API-1104/ASME IX and international Codes Interpretation. course
(Zakhem Lagos)………...………………………….…………….…….… (Dec.-2012)
(2) Blasting, Painting & Coating Inspection. Course.
(Shell Port Harcourt)……………………………………...................….. (April 2013)
(3) Quality Assurance & Metallurgy of Weld. Course.
(PTI Warri) Shell program………………………………………….…… (August-2014)
PROJECT WORK WRITTEN AND SUPPERVISE:
1. Method statement for pipeline installation at Ovia river-crossings:
(on Expansion of Escravos-Lagos Gas Pipeline Phase II)
Approved for costruction by NNPC 2014
2. Method statement for pipeline installation at Ikpoba River 2 crossing:
Approved for costruction by NNPC 2014
3. Method statement for earth road crossing at KP50 to KP97.
Approved for costruction by ZAKHEM Construction 2013
4. The relationship between casting speed and porosity formation in billets
(at Delta steel company Limited Ovwian-Aladja)
Approved by Enugu state universty of science & Technology 2005
COMPUTER PROFICIENCY:
Programme Development Tools (Basics, Cobol, Fortran) Word processor (MS
word for windows) Spread sheet (MS excel for windows) Presentation and
graphics (power point and Corel draw).

PROFESSIONAL WORKING EXPERIENCE:
Date : From May 2016 to Aug. 2016.
Company : DESICON Engineering Nig. Ltd
Position : QAQC Coodinator
Project : SPDC 48’’ Emergence Repair Project.
Location : Lagos/PH/Forcados.
Role & Responsibilities:
- Supervises the quality control function/activities of the project, including quality
control inspection schedules and the collection of quality records
- Ensures the avaliability of quality records and documents
- Supports the manager in dealing with the client for all quality matters.
- Assesses the implementation of the quality plan and quality control plans on the
site.
- Allocates quality control personnel to the various areas of site activity.
- Supervises inspection, reports and the documentation issued by inspectors and
file the required quality records.
- Supports the construction roles in the management and control of subcontractors
- Evaluates the qualifications of welders and non destructive test-NDT technicians
with regard to the activities assigned.
- Evaluates the qualifications of inspection personnel.
- Supports and/or execute to all the internal/external audits
- Coordinates the relevant Tracking systems for correct identification of materials
- Supervises the correct equipment calibration management activities.
- Supports the Welding & Non Destructive Test-NDT qualification activities.
- Cooperates to issue the Welding Procedures (WP)
- Cooperate with the Project Quality Manager to analyses of non-conformities.
- Checks the completeness and conformity to specified applicable requirements,
standards and/or directives
- Cooperates in Event Report Management and for all the implementation of
relative corrective actions.
- Systematically records the non-confrmity or event reports issued identify
apprpriate corrective actions.
- Ensures that the tests, controls and inspections are carried out and that
perssonnel have access to all required project documentation.
- Monitors the progress of quality- related site activities.
- Makes site personnel aware of and trainee them on quality topics.

Date : From June 2015 until Date.
Company : DESICON Engineering Nig. Ltd
Position : QAQC Supervisor
Project : Odidi ELPS Gas Project.
Location : Warri, Delta State.
- Supervises the quality control function/activities of the project, including quality
control inspection schedules and the collection of quality records
- Ensures the avaliability of quality records and documents
- Supports the manager in dealing with the client for all quality matters.
- Assesses the implementation of the quality plan and quality control plans on the
site.
- Allocates quality control personnel to the various areas of site activity.
- Supervises inspection, reports and the documentation issued by inspectors and
file the required quality records.
- Supports the construction roles in the management and control of subcontractors
- Evaluates the qualifications of welders and non destructive test-NDT technicians
with regard to the activities assigned.
- Evaluates the qualifications of inspection personnel.
- Supports and/or execute to all the internal/external audits
- Cooperate with the Project Quality Manager to analyses of non-conformities.
- Cooperates in Event Report Management and for all the implementation of
relative corrective actions.
- Systematically records the non-confrmity or event reports issued identify
apprpriate corrective actions.
- Makes site personnel aware of and trainee them on quality topics.

Date : From June 2013 to June 15.
Company : Safety2000 Nig. Ltd (Zakhem Construction Nig Ltd)
Position : Project Engineer / QAQC Lead
Project : Expansion of Escravos-Lagos Gas Pipeline Phase II
Location : Edo State
- Administration of Project Plan.
- Planning & coordinating of all the different crews coordinators.
- Coodinating between our client and Subcontractors.
- Administration of production chart to as-attain joints welded, joints coated and the
total kilometer lowered & backfilled.
- Oversee all document and making sure that Iso standard is followed.
- Mapping out the different operating channels and thier line of reporting.
- Drawing the project plan to meet with the project approved date.
- Preparation of daily work schedule & also interpreting to client
- Writting and reviewing of work method statement.
- Provide QA/QC services to support design, procurement, fabrication,
construction, installation, commissioning, operational readiness and initial
operation.
- Fully knowledgeable of the work scope and associated HSE risks, Work
procedures, Method Statements, Quality and HSE requirements from the
Contractor and required level of supervision.
- Daily Quality Control Monitoring, Verification and Reporting of daily work
progress
- Verification of Contractor's compliance with the procedures, specifications, HSE,
and Quality requirements.
- Ensure the Contractor's Equipment and tools are adequate and properly
calibrated.

- Issue queries, raise non-conformances and site instructions and enforce
corrective actions.
- Issue site instructions to contractor as agreed with the project engineer.
- Provide feedback on performance including HSE performance monitoring and
verification of compliance with Contract HSE Plan
- Coordinating and supervising all personnel on site
- Providing Daily / Weekly / Monthly reports
- Support HSE Officers in UA/UC identification and sharing learning
- Permit to Work (PTW) Management
- Maintain all required documentation, records, certifications, training and
inspection reports.
- Propose strategies to improve / modify Contractor's performance, if necessary
- Assess and report potential showstoppers (community problems, material supply,
interfaces etc)
- Materials and Equipment control / status reports
-
Date : From Jan 2013 to June 2013.
Company : Safety2000 Nig. Ltd (Zakhem Construction Nig Ltd)
Position : QA/QC / Material Control & Preservation Coordinator
Project : Expansion of Escravos-Lagos Gas Pipeline Phase II
Location : Edo State
- Administration of production chart to as-attain joint welded, joint RT condition and
joint okay for blasting & coating.
- Review quality Assurance Manual and quality control procedure.
- Planning & coordinating all the different crews activities.
- Coodinating between NDE and Subcontractors for Location and priority of
weldment.
- Reveiw daily welding report from the different Crews and verify accuracy and
competeness.

- Visual and Dimensional inspection of all created hold-points in Accordance with
ITP: from material receipt, fabrication, hydro test, sand and grit blasting, painting
to documentation and dispatch.
- Assist the welding Inspectors in the field in daily activities of inspection and
documentation.
- Makes site personnel aware of and trainee them on quality topics
Date : From Oct. 2012 Jan 2013
Company : SDEM ERTECTOR NIG. LTD
Position : Material Control / QAQC Engineer.
Project : Gas Turbine power plant (GTPP) Geregu Phase II.
Location : Ajaokuta, Nigeria.
- Administered Standards, Codes, Specifications and Government Regulations as
it is applicable and required by the Project
- Ensured integrity of materials, consumable, welded structure and equipment to
avert service failure and danger to crew
- Planning & coordinating shop floor activities.
- Reduced welds production cost to a barest minimum by effective coordination
and control of project welding procedures qualifications, welder performance
qualifications, destructive and non destructive tests.
- Checking weld preparations/route gaps, tolerance &visual inspection of
completed weldment of welding techniques involved with SMAW, TIG, SUB ARC
(SAW) & MIG
- Visual and Dimensional inspection of all created hold – points from material
receipt, fabrication, hydro test, sand and grit blasting, painting to documentation
and dispatch.
- Liaise with client representatives.
- Strictly adhere to instructions and working to meet targets.
- Preparation of Daily Welding Records.

Date : From Oct. 2009 to Sept. 2012.
Company : NET-WORK OIL & GAS LTD
Position : QA/QC /Material Control & Preservative Engineer.
Project : Integrated Gas Handling Facilities.
Location : Benin Edo State.
 Taking of daily welding report & other reports
 Visual Inspection of welds
 Preparation of welded joint for NDT (RT, MPI & DPI)
 Review of Radiographs and Lamination checks
 Marking of failure welded joint for repair
 Spoon of drawings & Supervision of workshop/field fabrication
 Preparation of inspection record. Etc
 Welders’ Qualification
 Verification of material certificates
 Verification of test package piping P&ID and Isometric ‘’As Built’’
Drawings.
 Review test package documentation for above ground piping systems.
Date : From NOV.2008 to Feb 2006.
Company : TLK NIG. Ltd
Position : Welding Materials/Welding Inspector
Project : FABRICATION OF TWO (2) CRUDE STORAGE TANK & THE
PIPING CONNECTION AT NPDC OREDO FLOW STATION
Location : Ologbo Edo State
 Material receipt inspection,
 Weld consumable certification and storage,
 Conducting procedure and welder qualification test,
 Carried out dimensional check on fabricated spools in conformance with the
specification.
 Monitor and ensure welding parameters are to WPS,
 Carried out welds visual inspection,
 Prepare daily inspection report and raising of NDE request.
 Visual Inspection of welds
 Dimensions, Inspection & Controls
 Consumable, Inspection & Controls

 Welders’ Qualification
 Writing of Reports
 Material reception and control
PROJECT : Ogharaefe to Oredo 12inch 20km. Sch. 80. Crude Oil Pipeline
Replacement Project (Nigerian Petroleum Development
Company)
POSITION:- Welding Inspector
DATE: June 2004 – Feb 2006
KEY ROLESAND ACTIVITIES:-
- Reviewed welding procedures
- Reviewed NDT procedures
- Checked project equipment/materials
- Checked calibration certificates of equipment
- Checked certification of NDT personnel
- Participated in the planning of work site safety
- Supervised welder qualification test
- Reviewed radiographs
- Witnessed mechanical test
- Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges
and elbows before use
- Carried out Holiday Detector Test on the coated pipes and the rapped welded joints
- Marked out weld defects
- Prepared repair list of welds with defects
- Witnessed penetrant, magnetic particle and vacuum pump tests
- Proof read and signed NDT and welding reports
- Monitored hydrostatic test on both the flow lines and different types of valves on well he
ad manifold and the flow station manifold, and signs off the charts
- Monitored the entire Tie in’s, Road crossings, and thrust boring on the line
- Prepared daily and monthly progress reports
- Compiled and submit monthly reports
REFERENCES:
Eng. Paul Eguavoen Aibueku
Head of Mechanical / Fabrication Dept.
Net-work Oil & Gas Nig. Ltd

08071590326
Eng. Momohsanni Lawal
Project / QAQC Coordinator.
Zakhem Construction Nig. Ltd
Obayantor yard
08072462702 / 08035948431
Mr. Inyang Udoma
Construction Manager
Obayantor yard
08076233819 / 08033012037
Mr. Ardem margossian
Project Manager
08090933510
Eng. Shegun
QAQC Manager
Linkso Nig. Ltd
Lagos
08032961596

OMIJIE ehinomen prince Reviewed cv

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to OMIJIE ehinomen prince Reviewed cv

Similar to OMIJIE ehinomen prince Reviewed cv (20)

OMIJIE ehinomen prince Reviewed cv