1. ABDUL JABBAR
MECHANICAL FOREMAN
Mob. #: +0094775436298
E-mail: jabbarafi@yahoo.com
Career objective
Looking for a scintillating organization that will drive and quench my skills to
the best and offer me a position requiring radical and creative thinking where
continuous growth through learning are indefatigable issues through which I
contribute extensive experience, training, and skills in the areas of exposure .
AcademicProfile
+2 from Al-Arshad Vidhyalayam - Srilanka
ProfessionalExperience
I. Mechanical & Civil Supervisor
DDCS Project, Aramco - Dhahran, Saudi Arabia.
Company : AICCO
Project : DDCS Project
Client : SNC Lavalin
Designation : Mechanical & Civil Supervisor
Duration : September 2011 to january 2014
DUTIES&RESPONSIBILITIES
Coordinating all modifications with the Mechanical and Technical
Departments.
Responsibility for the health, safety and welfare for all activities that are
mechanical in nature
Responsible for the piping material procurement and management system
activities of the project covering materials (mechanical) ordering
procurement proper storing inventory control and all related documentation
2. Supervise activities inclusive of fabrication, piping installation, pressure
testing and pre commissioning.
Monitoring and conducting material inspection for piping, structural and
equipments as per standards, codes and process standard specifications.
Identifying piping and equipment location as per general arrangement
drawing and prepare the measurement.
Monitor and witness pressure test of pipelines according to the piping class,
test limits and required pressure.
Preparation of Pressure test (hydro, pneumatic, and service test) packages
and ensure clearing of punch items prior to pressure test.
Preparing the punch lists (before and after pressure test) for the test packages.
Assisting inspection and testing procedure of piping system.
Coordinate with construction, testing group, and QC department in the
preparation of test requirement of each test pack and facilitate close out of
any outstanding punch items before and after pressure test.
Coordinate with client inspector for final inspection.
Monitor and supervise reinstatement.
II. Mechanical Foreman.
JESCO Project, Juabil – Saudi Arabia
Company : AICCO
Project : JESCO Project
Client : DANIELI
Designation : Mechanical Foreman
Duration : October 2009 to August 2011.
DUTIES&RESPONSIBILITIES
Coordinate work teams directly in order to maintain high standards of
performance, quality and safety
Checking all Isometric drawing and GA Piping / field installation and
establish the necessary logistics.
Attend weekly meeting and monthly analysis works progress.
Motivate workers to attain the production schedules.
Monitoring progress and distribution of daily tasks, necessary tools and
materials needed, with particular emphasis on compliance with specific
safety rules and quality standards, ensuring the necessary logistics for each
team of work.
Highlighting and solving of any technical or organizational problems at the
team level in terms of location and setting priorities in the works execution
under direct supervision of the site manager.
3. Checking the piping field installation to ensure that quality of materials used
and workmanship are according to drawing specification.
Conducting visual inspections and dimensional measurements for marking,
cutting, welding and positioning for all piping spools, according to the
quality of materials before assembly and erection.
Checking the all prefabricated pipe spools, as dimension and quality so that
they comply with isometric drawings as well as with the actual situation on
site to meet the specific requirements of the project and beneficiary.
Take decision necessary to ensure quality of execution and record of
documents.
Supervise for proper installation of piping, using the specified types of
supports.
Modify the prefabricated spools when necessary, based on isometric
drawings, technical specification and as build situation.
Assign on fabrication and erection of pipes per teams and choosing the
optimal location per specified coordinates.
Providing technical assistance for ongoing work at all subordinate teams.
Inspection of materials and equipment received before use so that they
coincide with the technical documentation as quality and quantity.
Checking as build situation, making the necessary corrections and do report
of all non-conformities or changes required by the customer also remedial
proposals at designer, so that documents should be reviewed and approved
at time.
Perform the final check of all completed pipeline routs (quality, dimensions,
components, etc.) before carry out test pack and teaching work at home
customer.
III. Mechanical Technician.
IBN Hayan Plastic Product Company, Juabil – Saudi Arabia
Company : AFI
Project : TAYF Project
Client : SABIC
Designation : Mechanical Technician
Duration : May 2008 to September 2009.
DUTIES&RESPONSIBILITIES
Check equipment and operating systems and correct wherever necessary.
Ensure mechanical operations, standards and controls are maintained at high
quality.
Resolve motor, pump, conveyor and hydraulic problems.
4. Ensure high level technical support to lower level technicians.
Show expertise in working with team and independently.
Comply with company safety guidelines and procedures.
Repair and perform preventive maintenance as per established standards.
Use hand tools like power tools equipment daily.
Comply with company and customer regulations and policies.
Handle personal tools for job including up-to-date documented personal tool
lists.
Handle time accounting ad complete work order.
Manage positive customer and employee relations.
Work all shifts flexibly when job demands.
IV. Mechanical Fitter.
Riyadh Refinery, Saudi Aramco – Riyadh, Saudi Arabia.
Company : BIN QUARYA
Project : Riyadh Refinery – Shut down Works
Client : Saudi Aramco
Designation : Mechanical Fitter.
Duration : October 2006 to April 2008.
DUTIES&RESPONSIBILITIES
Cut, thread, and hammer pipe to specifications, using tools such as saws,
cutting torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according
to specifications, by welding, brazing, cementing, soldering, and threading
joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks,
using brackets, clamps, tools or welding equipment.
Inspect, examine, and test installed systems and pipe lines, using pressure
gauge, hydrostatic testing, observation, or other methods.
Measure and mark pipes for cutting and threading.
Lay out full scale drawings of pipe systems, supports, and related equipment,
following blueprints.
5. Plan pipe system layout, installation, or repair according to
specifications.
Select pipe sizes and types and related materials, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Cut and bore holes in structures, such as bulkheads, decks, walls, and
mains, prior to pipe installation, using hand and power tools.
Modify, clean, and maintain pipe systems, units, fittings, and related
machines and equipment, following specifications and using hand and
power tools.
Install automatic controls used to regulate pipe systems.
Turn valves to shut off steam, water, or other gases or liquids from
pipe sections, using valve keys or wrenches.
Remove and replace worn components.
Inspect work sites for obstructions and to ensure that holes will not
cause structural weakness.
Operate motorized pumps to remove water from flooded manholes,
basements, or facility floors.
V. Mechanical Fitter.
AL Qassim Cement Factory, – Saudi Arabia
Company : AL-SHAHRANI
Project : AL Qassim Cement Factory
Client : MASACO
Designation : Mechanical Fitter.
Duration : April 2004 to August 2006.
DUTIES&RESPONSIBILITIES
Assists workers in performance of tasks, such as riveting, welding, bolting,
and chipping, using portable power tools.
Performs other duties as described under Supervisor any industry Master
Title.
May be designated according to activity of workers supervised as Supervisor,
Riveting.
6. Coordinates activities of work crews engaged in erecting structural steel.
Marks locations for new rivet holes to rectify errors.
PC Skills
Microsoft Office.
Skills
Strong communication skills with people of all levels and roles.
Driven to learn and apply new ideas.
Recognized as creative and practical problem solver.
Unique ability to adapt quickly to new technologies, challenges and
changing environments.
Experienced in balancing priorities for short term and long-range
goals.
Ability to coordinate multiple projects and meet deadlines under
pressure.
PersonalProfile
Father’s name : Abdul Jabbar.T
Marital status : Married, Male
Birth Date : March 06, 1983
Languages : English, Hindi, Malayalam & Tamil
Passport Number : N3689998
Nationality : Sri Lanka.
DECLARATION
I, Abdul Jabbar hereby declare that information and facts stated herein and
above are true and correct to the best of my knowledge and belief.
(Abdul Jabbar)