THe deadline to convert GHS labeling and the new SDS requirements is fast approaching: June 1, 2015. It's time to understand GHS. This webinar will cover everything you need to know about GHS ompliance. This include:
Written Program and Plan Updates
Labeling with Hazard Warnings and Pictograms
Employee Training Requirements
3. 1.All lines are muted, use the chat panel for tech
issues.
2. Q&A at the end using questions tab in the
“Chat” panel. Unanswered questions will be
answered via email after the webinar.
3.Webinar recording and slides will be emailed to
you tomorrow morning.
Share With the Audience
4. Meet Your Presenter
• Rick Foote is the Industrial Services
Manager at Triumvirate Environmental.
Rick has over 25+ years of EH&S
experience. He is an OSHA 501
Instructor and has spoken at many
conference including ASSE Regional
Conference and Northern New England
Safety and Health Conference.
9. Why is GHS Needed?
No country has the ability
to identify and specifically
regulate every hazardous
chemical product
Adoption of requirements
for information to
accompany the product
helps address protection
needs
10. Why is GHS Needed?
Countries with systems
that address these
needs have adopted
different requirements
for hazard definitions.
Impacts protection and
trade,
11. Why does OSHA want this?
OSHA's Hazard Communication Standard
(HCS) has performance-oriented requirements
for labels and safety data sheets.
Change addresses domestic concern.
Users would prefer standard.
13. Major Revisions to the HCS
Safety Data
Sheets
Information and
Training
Refined
definitions of
flammable liquids
and toxicity
14. Benefits
Increase quality and consistence
Estimated to prevent 43 fatalities and 521
injuries and illness per year
Estimated annualized cost reductions and
productivity gains are $507 million annually
17. New Flammable Liquid
Deleted term
“Combustible Liquid”
Flammable liquid means
any liquid having a
flashpoint at or below
199.4 [deg]F (93 [deg]C).
18. New Flammable Liquid
Category 1 shall
include liquids
having
flashpoints
below 73.4F and
boiling point at or
below 95F.
Category 2 shall
include liquids
having
flashpoints
below 73.4F and
a boiling point
above 95F
Category 3 shall
include liquids
having
flashpoints at or
above 73.4 F
and at or below
140F.
Category 4 shall
include liquids
having
flashpoints
above 140F and
at or below
199.4F
19. Health Hazard Group
Classes
• Carcinogenicity
• Reproductive toxicity
• Specific target organ toxicity
single exposure
• Specific target organ toxicity
repeated exposure, and
• Acute toxicity
• Skin corrosion/irritation
• Serious eye damage/eye
irritation
• Respiratory or skin
sensitization
• Germ cell mutagenicity
• Aspiration hazard
20. Physical Hazard Group
Classes
• Explosives
• Flammable gases/aerosols
• Oxidizing gases
• Gases under pressure
• Flammable liquids/solids
• Self-reactive substances and
mixtures
• Corrosive to metals
• Pyrophoric liquids/Solids
• Self-heating substances and
mixtures
• Substances and mixtures
which, in contact with water,
emit flammable gases
• Oxidizing liquids/Solids
• Organic peroxides
34. Safety Data Sheets
The safety data sheet should
provide comprehensive
information about the chemical
that allows employers and
workers to obtain concise,
relevant and accurate
information that can be put in
perspective with regard to the
hazards, uses and risk
management of the chemical
product in the workplace. Must
contain 16 sections.
35. Hazard and Precautionary
Statements
DANGER Formaldehyde
May Cause
Cancer
Causes Skin,
Eye, and
Respiratory
Irritation
Authorized
Personnel Only
Hazard Statements describe
the hazards associated with
a chemical
Precautionary Statements:
recommended measures that
should be taken to protect
against hazardous
exposures, or improper
storage or handling of a
chemical
37. Training Requirements
Modified training requirements have been included in the final
rule in order to address the new label elements and SDS format
required under this revised standard.
38. Training Requirements
OSHA estimates that employee training will take up to:
One Hour per
production
employee in
most industries
Thirty minutes
in occupations
exposed to a
few hazardous
chemicals and
types of
hazards
Ten minutes
per employee
in some
occupations
where GHS-
type
pictograms are
already in use
39. Dates to Remember
• June 1 2015
• June 1 2016
Other OSHA Regulations Affected
• Laboratory Standard
• Hazardous Waste Operations and
Emergency Response
• Spray finishing
• Welding Cutting and Brazing
Other US Agencies Effected
• DOT
• EPA
• CPSC
42. Thank You For Attending!
Expect a copy of this presentation
tomorrow
Please respond to our survey
You will receive a special offer
from us
Attend future webinars here.