1. SHAIK NAVEED BASHA
D-No: 18-4-44, Markendaya Street, Tenali, Guntur dist, A.P,
Email id:naveedbasha65@gmail.com
CAREER OBJECTIVE:
Looking for a suitable position in Engineering
strong technical contribution can be given for the fulfilment of organization goals along with the
development of professional skills.
ACADEMIC QUALIFICATION:
• B-Tech in Mechanical Engineering,
Andhra Pradesh, India (2009-2013)
Percentage: 67.85
• HVAC (Design and Drafting): M E P Centre, Ameerpet, Hyderabad
2013).
• Intermediate, Narayana junior college, Vijayawad
Percentage:85
• Secondary school examination,
Percentage:89
WORK EXPERIENCE:
BIOLOGICAL E LIMITED, Shameerpet,
CAPEX Projects (Process Equipments and Utilities)
Desig: Executive
Project-1(Blending suit 4):
Performed Installation and operational qualification
and took active part in their preparation
Autoclave of 1200l capacity
Project-2(Filling Line 3):
Performed Installation and operational
part in their preparation for filling machine of 20
distribution systems of capacity 5KL and flow rate of
Depyrogenation tunnel of output capacity 600
SHAIK NAVEED BASHA
treet, Tenali, Guntur dist, A.P, India, Pin code: 522201, Ph no: 91 9505907464,
Email id:naveedbasha65@gmail.com
position in Engineering/Process Design in utilities and process equipments
strong technical contribution can be given for the fulfilment of organization goals along with the
Mechanical Engineering, Jawaharlal Nehru Technological University, Kakinada(GMRIT),
2013).
M E P Centre, Ameerpet, Hyderabad, Andhra Pradesh, India
arayana junior college, Vijayawada, Andhra Pradesh, India (2007
Secondary school examination, Nehru Niketan High school, Tenali, Andhra Pradesh
, Hyderabad. (Since Dec 2013 to till date)
(Process Equipments and Utilities):
Performed Installation and operational qualification as per the approved
and took active part in their preparation for the equipments like Blending vessels of 50 Lit
Performed Installation and operational qualification as per the approved protocols and took active
illing machine of 20 viles/min capacity, Purified water and water for injection
distribution systems of capacity 5KL and flow rate of 4.5 m3
/hr, PFS machine of fill
of output capacity 600 viles/min and sterilize at 300°c,
Pin code: 522201, Ph no: 91 9505907464,
in utilities and process equipments where
strong technical contribution can be given for the fulfilment of organization goals along with the
Jawaharlal Nehru Technological University, Kakinada(GMRIT),
, Andhra Pradesh, India (September
(2007-2009).
Nehru Niketan High school, Tenali, Andhra Pradesh, India (2006-2007).
as per the approved protocols
vessels of 50 Lit capacity,
qualification as per the approved protocols and took active
viles/min capacity, Purified water and water for injection
filling capacity 0.2 to 3 ml,

2. Project-3(Block-A):
Performed Installation and operational qualification as per the approved protocols and took active part
in their preparation for Pre-Treatment RO water system of capacity 20 m3
/hr which treats the bore well
water and increases it’s quality to meet with required specifications.
Took active part with vendor in performing activities like Hydro test, Passivation, Boroscopy and
Radiography for newly installed clean utility pipe lines
Performed Installation and operational qualification as per the approved protocols and took active part in
their preparation for oxygen generation system capable of producing oxygen at a rate of 15 Nm3
/min at 3.5
bar pressure. Process chiller of 150 Tr capacity and Air compressor capable of delivering air of 215 cfm at 8
bar pressure.
Performed Installation and operational qualification as per the approved protocols and took active
part in their preparation for Purified water generation system of 1000 LPH capacity which treats potable
water to generate purified water, Pure steam generator of 300 Kg/hr capacity, Multi Effect Distillation Still to
generate water for injection at 800 LPH capacity.
Qualification of Bio-kill tank system of capacity 5 KL which treats the effluent to reduce the bio burden
and discharge the bio-waste.
Project-4(QC Lab-2):
Performed Installation and operational qualification as per the approved protocols and took
active part in their preparation for Purified water generation system of 500 LPH capacity which treats
potable water to generate purified water, Pure steam generator of 250 Kg/hr capacity, Pure steam cooler of
50 LPH to generate WFI.
Performed Installation and operational qualification as per the approved protocols and took
active part in their preparation for sterile autoclave of 1200L capacity and decontamination autoclave of
800L capacity along with performance qualification.
Along with all the above also qualified the black utilities such as compressed air(process and instrument),
plant steam
Project-5(Pertussis expansion block):
Took active part with vendor in performing activities like Hydro test, Passivation, Boroscopy and
Radiography for newly installed clean utility pipe lines while commissioning
Performed Installation and operational qualification as per the approved protocols for Process chiller of
75 Tr capacity and Air compressor capable of delivering air of 215 cfm at 8 bar pressure.
Performed Installation and operational qualification as per the approved protocols and took active
part in their preparation for Purified water storage and distribution system of 2000 L capacity and Pure
steam generator of 250 Kg/hr capacity, Multi Effect Distillation Still to generate water for injection at 800
LPH capacity and WFI cooler of 40 LPH capacity

3. Design work:
• Played a vital role in solving onsite problems and changes to the actual design to match the site
conditions and meet peak load demand along with the organization requirements which are as per
ASME BPE 2012.
• Performed Chilled water load calculations to be supplied foe AHU’s and the pipe line size calculations
to meet the peak load demand
• Addition of chilled water supply pump to existing distribution system to meet the peak load demand
of all equipments in terms of both flow rate and pressure.
• Preparation of P&ID ‘s of chilled water generation systems.
ACADAMIC PROJECT DETAILS:
• Mini project had been completed on study of superheaters used in boilers of thermal power plant
their type and purpose of using them in Visakhapatnam steel plant, Vizag.
• Main project had been done on Design and fabrication of Induction based metal melting furnace
which is of capacity 3KW and capable of melting metal of 20Kg whose melting point should be less
than 1000°
c.
TECHNICAL SKILLS:
• Knowledge in design software’s like AutoCAD.
• Capable of creating programmable excel worksheets.
• Sound Knowledge in programming software’s like C and JAVA.
• Knowledge in codes and standards of ASTM.
• Knowledge on codes used for process piping mainly ASME B31.3 and ASME BPVC.
• Troubleshooting of process related problems.
• Updation of P&ID’s of process equipments and utilities.
CO-CIRCULAR ACTIVITIES:
• A paper presentation on Antimatter at a national level event conducted at GMRIT, Rajam.
• A paper presentation on Hydrogen in I C Engines at a national level event conducted at GMRIT,
Rajam.
• A paper presentation on Ocean Thermal Energy Conversion at a national level event conducted at
ANITS, Vizag
• A workshop on Robotics was attended which was conducted at SRKR Engineering College,Bheemavar.
• Attended a national level seminar on ‘Insight to Manufacturing Technology’ by Prof.P.N Rao.
• Qualified in PGDC CET 2013 conducted by NPTI.
STRENGTHS:
• Capable of working in groups.
• Highly motivated and goal oriented.

4. PERSONAL DETAILS:
Father name : Mr Shaik Habeeb Basha.
Father’s occupation : Business
Date of Birth : 21-08-1992.
Gender : Male
Marital status : Single.
Languages known : English, Hindi, Telugu and Urdu.
Nationality : Indian
Religion : Islam
Hobbies : Preparing documentaries, short films and dancing.
PASSPORT DETAILS:
Passport no : L6001775 Date of issue : 12/11/2013
File no : HY6061052047313 Date of expiry : 11/11/2023
DECLARATION:
I hereby declare that the information provided above by me is true as of my knowledge and belief.
Place:
Date: (SK NAVEED BASHA.).