1. Habeeb Ahmad
Merbah near NBF Bank Fujairah, UAE.
Tel # +971507670137, +971543784715
PK # +923437220690, +923161464596
E-mail: engr.habeeb2011@gmail.com
Career Objective
Seeking the position in a reputed organization where I can provide my expertise in
analyzing the Engineering skills, Pro-Actively contribute and promote process improvement in the organization. I
am a motivated, passionate and hard working person, always strives to achieve the best possible.
Qualification
 2012 B.Sc.(Chemical Engineering) 1st
Division ( 82.4%) Bahaudin Zakariya University Multan.
 2005 F.Sc. (Pre Engineering) 1st
Division (65.2%) from the Central Degree College Bosan Road
Multan.
 2003 S.Sc. 1st
Division (78.3 %) from Govt. Comprehensive School Multan.
Professional Apexes:
 Track record for meeting timelines and exceeding expectations.
 Commended for top notch organizational skills.
 A keen knowledge of Engineering for helping in process improvement and new designing.
 Confident public speaker, able to establish rapport with audience and convey information with clarity
and enthusiasm.
 An organized and conscientious self starter, able to strategize and prioritize effectively to accomplish
multiple tasks and stay calm under pressure.
 A detail oriented process engineering professional providing through and skillful administrative support
to senior executives and promoting team cohesiveness.
 A creative, resourceful and flexible, able to adapt to changing priorities and maintain a positive attitude
and strong work ethics.
Work Experience
Emirates Sembcorp water and Power supply
Worked as Plant Operator (March 2016 to Present)
• Managed all the field responsibilities.
• Working on PLC and DCS system to achieve the operation goal within safety measure.
• Responsible for 5 MSF units having capacity 12.5 MIGD each and RO system with capacity of 37.5 MIGD.
• Perform the responsibilities of start-up and shut down.
• Isolate the equipment for PM Job and check the ongoing jobs performance.
• Coordinate with control room in case of trouble shooting and emergency.
• Check the seawater intake system with pre-treatment.
• Perform the duties on equipment change over on regular basis.
• Check and operate four chiller units to get cooling for the whole plant.
• Check all the equipment running conditions and their parameters according to the design.
• Perform all the activities on potable plant to get the final value according to the standard before storing.
• Check the quality of water in pre-treatment units like Coagulation tank, DMF, DAF, Cartridge filter.
• Check and confirm the performance of all racks with each vessel.
• Check the entire chemical dosing system and their effectiveness through lab coordination.
• Check all the working condition according to the design and safety point of view.

2. • Take the different reading of pressure, temperature and other parameters, put them in a log sheet.
Hydraforce Services LLC
Worked as Project Engineer (September 2014 to Janvery 2016)
• Responsible for project objectives by reviewing project proposals and plans; conferring with
management.
• Execute project schedule by studying project plan and specifications; calculating time requirements;
sequencing project elements.
• Controls project costs by approving expenditures and execute the project with time saving.
• Responsible to handle complete project of chemical cleaning of pipelines.
• Responsible for safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Worked on hydraulic pipelines commissioning, also performed the flushing and pressure testing.
• Supervise the manufacturing of hydraulic power units and cylinder, also perform pressure testing.
• Contributes to team effort by accomplishing related results as needed.
• Keep in touch with client and supplier, follow all the PO’s and material required in every project.
• Performing the responsibilities of admin and sales to support our team to get good business.
• Follow all the rules and regulation according to ISO 14001 and ISO 9001.
Chemical Kinetics Water Treatment
Worked as Operation and Maintenance Engineer (July 2013 August 2014)
• Regular testing of water samples usually located in Analyzer Equipment with parameters like silica level,
phosphate, nitrite, iron, chloride, chlorine, total hardness, total suspended solids, turbidity, alkalinity,
conductivity, pH, zinc, iron dispersant, scaling inhibitors, BOD ,COD for waste water projects (ETP).
• Responsible for maintenance of boiler, turbine, cooling tower, water treatment RO and waste water
treatment plant.
• Provide on-site testing with instrument being used such as spectrophotometer, conductivity and PH
meters.
• Provide Reverse Osmosis Membrane Cleaning by the use Aquatreat, Unitor Proprietary Chemicals.
• Ensuring & recommending the proper application of chemicals into the clients’ Equipment through
regular monitoring of chemical dosing pumps and chemical tanks.
• Responsible for all sales of chemicals and give suggestions to client for better function of their
equipment.
• Keen communicator with excellent relationship management, colleagues, client and supplier.
Shahtaj Sugar Mill
Worked as Utility Engineer (January 2012 to June 2013)
• Responsibilities for all site utilities and aided as technical engineering resource for site utilities.
• Responsible for implementing the preventive maintenance of water treatment and waste water
treatment plant (ETP) equipments like pumps, blower, filtering systems, dissolve air flotation equipment,
motor controls, PLC, constant pressure pumps etc.
• Responsible for implementing the sampling and water analysis for boiler water, condensate recovery,
potable water, process water and wastewater treatment plant.
• Responsible for operation and maintenance of cooling tower, boiler, turbine, Water treatment, RO plant
and waste water treatment.

3. • Keen interest in water treatment especially the reverse osmosis plant.
• Responsible for operation and maintenance of wastewater plant, conducted process adjustments and
change of flow and managed the daily operation.
• Manage and help to analyze influent and effluent samples, daily laboratory analyses will be done in an
on-site lab.
• Commissioning of all the plant activities and perform the responsibilities of team leader.
• Responsible for plant start-up, shut down and check all the activities going on in different shifts.
Personal Traits:
 Believe in the work. Theme “Work Is Worship”
 Excellent grasping power and technical skills.
 Have Good Communication Skills.
 Positive attitude and enthusiastic in team work.
 Team Work Spirit and Motivation.
 Abilities to make other understand own viewpoint.
Personal Information
 Father Name : Hafiz Saeed Ahmad
 Date Of Birth : 2nd
June 1986
 Marital Status : Married
 Nationality : Pakistani
 Passport No. : MA1168281
 Visa Status : Employee
Skills:
 Excellent in spoken and written in Arabic, English and Urdu.
 Staff Training and Development.
 The ability to work across multiple sites.
 Understanding technical policies, manuals and blueprints.
Final Year Project
• Production of Jet Fuel 100,000 bbl/day.
• Energy Balance and Mass Balance calculation for Equipments
• Design Major Parts of Refinery Including Centrifugal Pump, Heat Exchanger, Reflux Drum, Pre Flash
Tower, Furnace, and Distillation Column, Electrostatic Coalesce, Caustic Settler, Salt Filter.
Computer Skills
Windows, Microsoft Office, Internet Surfing, C++ Language
INTERNSHIP
• Six week internship in PARCO Refinery, kot-Addo Pakistan.
• Six week internship experience in PEPSI Cola, Multan Pakistan.
Reference
Will be provided if necessary.

4. Declaration:
All the given details are updated and true to my knowledge and I can produce the documents whenever it will be
required.