Magdy hussine cv

Magdy Hussine
Commissioning and start up leader engineer
With a B.Sc. and upper gradual diploma degree in mechanical engineering and 21 years'
experience in fossil fuel power plants from testing through start up and operation, Mr.
Hussine is an expertise in this filed. He has also the complete knowledge and experience
in electrical, I&C, firefighting, HVAC and hydrogen generation systems start-up and
operation requirements. He is capable to prepare and put in order the complete turnover
packages for different systems and to execute their performance testing. He has very
high managerial and communication skills beside his technical capabilities.
PERSONAL INFORMATION: -
Name : Magdy Hussine Hammid
Date of Birth : 4th
May 1967
Marital Status : Married
Nationality : Egyptian
Religion : Moslem
Military Service : Done
Passport no : a08646632
Place of Issue : Egypt - Assiut
Date of Issue : 14/02/2013
Date of Expiry : 13/02/2020
Language : Arabic / English
Technical Qualification : Field, Control, Shift charge, and Senior Eng.
Professional Experience : Thermal Power Plant
Present Job : SAMSUNG C&T Commissioning and start-up
team leader
CURRENT ADDRESS: -
Country : Egypt
Address : Asyut
Mobile Phone : +201097498565
Email : magdyhussine109@yahoo.com
magdyhussine@gmail.com
EDUCATION: -
Freelancer 1/13 Magdy Hussine - CV

1. Post graduate Diploma of Mechanical Engineering in Thermal Power Engineering
with general grade very good in June 2001 from Assiut University.
2. B.Sc. of Mechanical Eng. In Thermal Power Engineering with General Grade Pass
in May 1993 from Assiut University.
TRAINING COURSES:
1. Advanced training of operation power station in Abu-Kerr thermal power plant.
2. Training course in North Cairo training centre.
3. In-site training in Assiut power plant.
4. M.S. project 2007course in New Horizons computer learning centre.
5. Excel 2007 course in New Horizons computer learning centre.
6. Word 2007 course in New Horizons computer learning centre.
7. Power Point course in Assiut power plant.
COMPUTER SKILLS:
1. Dos, Windows 95, 98, Me, 2000, Xp, Vista, Seven and Windows 8
2. M.S. Project
3. Microsoft office
4. Windows applications.
5. Fortran
Control Systems Experience:
1. Ovation 3.5.0
2. ALSBA 6.2.4.0
3. SPPA-T3000
4. ABB INDUSTRIAL IT- PGP version 4.1 service pack 3.
5. Yokogawa Centum CS 3000.
6. ABB INDUSTRIAL IT - 800XA SV5.1
7. Xp teleperm (TXP)
8. TLan – 90 PCV 4.3C(QNX)
9. Tosbac7/40E
LANGUAGE CAPABILITIES:
• Arabic (native language)
• English (fluent)
EXPERIENCE RECORD:
Date : 22/4/2015 – 06/9/2015
Employer : METKA
Project : SAMRA Phase 3 (SEPCO) (450 MW) PROJECT POWER PLANT IN
Jordan
Job title: Reliability and Performance/Shift Charge Engineer/Operation
Trainer
Job Description :
 Spearheaded the entire operations of 450 MW power plant.
 Making daily technical reports about the unit's abilities & efficiencies for the
commissioning manager.
 Modification, finalizing and testing the plant logic.
 Testing the one pushbutton starting up after making the required modification.
 Performing Equipment change over and tests.

 Successfully Participated executed plant performance test and enhance unit
efficiency.
 Successfully executed reliability test.
 Monitored plant performance regularly and recommended changes to enhance the
efficiency of the plant operations.
 Conducted field “walk-down” activity to identify & analyze corrective and
preventive action.
 Monitoring plant parameters, trouble shooting, first line maintenance activities,
isolations and de-isolations of plant equipment.
 On site operation trainer for the client stuff.
 Receive and carry out instructions from the Project management.
 Maintain files and records of instructions, memoranda, etc. in good order.
 Keep records of operations, faults, switching, forced signals conditions, etc.
 Hands over the plant from maintenance in line with the operation schedules and
requirements.
 Responding effectively to operational demands and assist in achieving safe and
efficient generation.
 Start up, synchronize, lead and shut down units as required.
 In case of system disturbance, normalization of system through safe and
accepted switching procedures.
 Perform all switching that can be done from the control room.
Plant Description:
Samra electric power company (SEPCO) 1150 MW project is approximately 35 km north
of Amman on the outskirt of Alhashmia/Zarka city in Jordan. The facility is a 2 x 2 x 1
combined cycle configuration consisting of:
 Two ALSTOM GT13E2 gas turbine
 Two ALSTOM HRSG triple pressure reheat cycle
 One ALSTOM VLB - HCY050/1 - ALM - MCG250 / NE33GA Steam Turbine 148.2 MW
two casing triple pressure reheat
 Direct air cooled condenser
______________________________________________________________________
Date : 8/6/2013 – 31/3/2015
Employer : SAMSUNG C&T
Project : QURAYYAH IPP 4100 MW PROJECT POWER PLANT IN KSA
Job title: COMMISSIONING, START-UP and OPERATION TEAM LEADER
Job Description :
 Applying the project Commissioning Plan in the execution of the work
 Lead and coordinate Commissioning activities.
 Lead and coordinate Operation activities.
 Reporting to the SAMSUNG C&T Commissioning manager.
 Conducts meeting with commissioning manager to review testing, commissioning
progress and HSE conformance on daily and occasionally more frequent basis as
well as meetings with the vendors to resolve any equipment related problems.
 Analyses and addresses critical areas of progress/delays in testing and
commissioning.
 Ensures that all safety and precautionary requirements and procedures are
followed during the commissioning process in line with the commissioning
schedule.
 Supervises logistics administration, field engineering, material approvals,
coordination with Client, planning, Progress monitoring & cost control.
 Managing and coordination with different subcontractors working at site

 Mobilizes manpower as per the commissioning schedule. Coordinates with other
departments/ agencies to resolve interface problems.
 Carries out a detailed assessment of the work involved in the individual group as
well as discipline with respect to the commissioning and assess the available
resources and possible constraints in the execution
 Carries out detailed analysis of plant commissioning, assessing the requirements
of special tools /temporary facilities/equipment required for pre-commissioning
and commissioning, prepare Equipment/Tools list and initiate procurement.
 Balancing between schedule, quality, cost and customer satisfaction.
 Conduct commission ability reviews of project documents
 Study the engineering / technical documents/vendor information and prepare
procedure for systematic and sequential pre-commissioning /commissioning /
startup of plant.
 Prepares commissioning schedule based on the quantum of job and duration for
each activity as well as prioritize system requirements.
 Creates elaborate commissioning plan including the scope of commissioning
activities, duration for each, scope of interlinked activities, resources available,
commissioning material requirements as well as availability of tools and
machinery
 Making commissioning procedure for condensate system, feed water system,
demine water system, closed cooling system, firefighting system, fuel oil system,
fuel gas system, chlorination system, water treatment system, desalination
system, GT inlet air chiller system, compressed air system, draining system,
HP/LP bypass systems and lube & lifting & hydraulic oil systems.
 Independently conducting construction progress inspections.
 Independently conducting commissioning inspections and execute
commissioning tests based on documented procedures
 Ensures all construction activities are completed prior to taking up the system for
commissioning.
 Participates in pre-construction Engineering reviews and project planning.
 Participates in management of change for engineering and construction of the
project.
 Follows construction progress and participates in solving construction and
installation problems.
 Supervise and perform flushing, chemical cleaning and steam bow.
 Supervise steam/water sampling system, safety (relief) valves, flue gas analyzing
system, chemical cleaning Vendors …etc.
 Review or approve implement a Testing and Commissioning Plan, Method
Statements, Testing and Commissioning Reports and/or validate or invalidate
testing and commissioning results for this discipline.
 Leading the pre commissioning the (Start-up) steam blowing.
 Arranges to prepare a check/punch list of jobs after a pre-commissioning run and
ensures their progressive clearance.
 Participate in performance test.
 Participate and leading the reliability test.
 Managing all aspects of pre-commissioning, commissioning and operation
checkout, through initial energizing, startup of the new process and associated
systems.
 Planning of 'on site' activities and allocation of available manpower on a daily
basis.
 Supervise and making CCC documents for plant handover.
 Receiving from client and managing how to clear punch items for handing over.
Plant Description:

The Qurayyah IPP 4000 MW project is approximately 100 km south of the Port of
Dammam on the coast in the Eastern Province of the Kingdom of Saudi Arabia. The
facility is a 2 on 1 combined cycle configuration consisting of:
 Twelve (12) Siemens SGT6-PAC 5000F gas turbine generating units (GTGs).
 Twelve (12) BHI HRSG (328T/H, 89BARS) HP, (46T/H, 8BARS) LP, Staggered,
natural circulation type with horizontal gas turbine exhaust gas flow through
vertical tube heat transfer sections heat recovery steam generators (HRSGs).
 Rotor Air Cooler Kettle Boiler (RACKB) contains a single stage Kettle Boiler.
 Six (6) Siemens SST6-4000 steam turbine generators (STGs).
 Six (6) BHI Seawater cooled condensers.
 241 x 3 M³/H Desalination plant.
 95 x 3 M³/H Demine plant
 Six (6) Bypass deaerator
 Three (3) x50% HYOSUNG Deaerator feed water pump per each module.
 Three (3) x50% TORISHIMA Feed water pump per each module.
 Two (2) x100% HYOSUNG Condensate extraction pumps per each module.
 Twelve (12) x 100% HYOSUNG GOODSPRINGS circulating pump.
 Two (2) Stellar Energy (SE) GT inlet air cooling (TIAC) 46144 TR.
Leave reason: End of Project.
______________________________________________________________________
Date : 1/10/2011 – 31/3/2013
Employer : ANSALDO CALDAIA
Project : ABU-QIR POWER PLANT IN EGYPT
Job title: COMMISSIONING, START-UP and OPERATION TEAM MANAGER
Job Description :
 Reporting to the Ansaldo Commissioning manager.
 Conducts meeting with contractors, consultant’s designers, and asset holder
department(s),as and when necessary, to review testing, commissioning progress
and HSE conformance on daily and occasionally more frequent basis as well as
meetings with the vendors to resolve any equipment related problems.
commissioning.
 Ensures that all safety and precautionary requirements and procedures are
followed during the commissioning process in line with the commissioning
schedule.
 Supervises logistics administration, field engineering, material approvals,
coordination with Client, planning, Progress monitoring & cost control.
 Mobilizes manpower as per the commissioning schedule. Coordinates with other
departments/ agencies to resolve interface problems.
 Carries out a detailed assessment of the work involved in the individual group as
well as discipline with respect to the commissioning and assess the available
resources and possible constraints in the execution
 Carries out detailed analysis of plant commissioning, assessing the requirements
of special tools /temporary facilities/equipments required for pre-commissioning
and commissioning, prepare Equipment/Tools list and initiate procurement.
 Study the engineering / technical documents/vendor information and prepare
procedure for systematic and sequential pre-commissioning /commissioning /
start up of plant.
 Prepares commissioning schedule based on the quantum of job and duration for
each activity as well as prioritize system requirements.

 Creates elaborate commissioning plan including the scope of commissioning
activities, duration for each, scope of interlinked activities, resources available,
constraints regarding the same, as well as availability of tools and machinery
 Making commissioning procedure for air and flue gas system, fuel oil system, fuel
gas system, feed-water and steam system, soot blower system and auxiliary
steam system.
 Ensures all construction activities are completed prior to taking up the system for
commissioning.
 Analyses the scope as per contract and battery limit /guarantees
project.
 Supervise and perform flushing, chemical cleaning and pass water of piping.
 Supervise steam/water sampling system, safety (relief) valves, flue gas analyzing
system, chemical cleaning, etc Vendors.
 Pre commissioning the (Start-up) Boiler steam blowing.
systems.
basis.
 Provides technical as well as manpower support to client during initial operation
Plant Description:
2x650 Mw steam power plant in EGYPT ALEXANDRIA ABU-QIR including:
 ANSALDO 2067 T/Hr SH flow, 1729 T/Hr RH flow, front & rear burners low NOX
burner TEA-BA dual fired (N.G./HFO) drum type, natural water circulation, reheat
boiler with 2 x 50%FD/GR fans, air heater, Soot blowers, CEMS, etc.
 MITSUBISHI STG with HP, IP and LP cylinders, H2 cooled Generator and see water
cooled Condenser with HP, LP Steam Bypass systems.
 BOP including 8 Stage regenerator feed water heaters, Circulating water, 2x 50%
TFWP and 1x 30% MFWP for start-up, Closed cooling water, Compressed air, EDG,
Fuel handling, Ball cleaning and H2 production Systems.
Leave reason: End of Project.
______________________________________________________________________
Date : 1/2/2011 – 30/9/2011
Employer : EGYPTROL
Project : HEAD OFFICE
Job title: MECHANICAL COMMISSIONING, OPERATION and START-UP
LEADER ENGINEER
Job Description :
 Support company stuff that supplied to other companies.
 Making commissioning procedure for gas turbine auxiliaries, boilers and its
auxiliaries, Desalination plant, CLOSED COOLING system, service water system
and power plants various systems
 Preparing commissioning bidders.
 Participates in getting ISO9001-2008 CERTIFICATE
______________________________________________________________________
Date : 4/12/2010 – 8/12/2010

Employer : ABB ENERGIETECHNIC
Project : DOHUK GAS POWER STATION
Job title: OPERATION and START-UP MANAGER ENGINEER
Job Description :
 Reporting to the site manager.
 Planning the various commissioning activity.
 Conducts meeting with contractors, consultant’s designers and asset holder
department(s),as and when necessary, to review testing and commissioning
progress on daily and occasionally more frequent basis.
commissioning.
 Ensure the setting up of safety and precautionary requirements.
project.
 Supervising pre operational, operational and load performance activities.
 Making on-site training for client engineers.
Plant Description:
4 x125 MW Simple cycle power project in IRAQ KURDISTAN DOHUK including:
 GE Gas turbine frame 9E
 Water-to-Air-Cooled 9A4 Generator with Brushless Excitation
Leave reason : Death of my son
______________________________________________________________________
Date : 20/3/2010 – 30/11/2010
Employer : NEM
Project : EL-ATF POWER STATION PROJECT
Job title: MECHANICAL COMMISSIONING TEAM LEADER, OPERATION and
START-UP MANAGER ENGINEER
Job Description :
 Reporting to the Commissioning manager.
 Conducts meeting with contractors, consultant’s designers and asset holder
department(s),as and when necessary, to review testing and commissioning
progress on daily and occasionally more frequent basis.
commissioning.
project.
 Supervise and perform flushing, chemical cleaning and pass water of piping.

 Supervise chemical dosing system, steam/water sampling system, safety (relief)
valves, flue gas analyzing system vendors.
 Pre commissioning the (Start-up) Boiler steam blowing.
 Inspection for de-aerator feed water tank, steam silencers, ducts, internal and
external insulation, expansion joints, bumpers, hangers, pipe support and steel
structure.
systems.
 Commissioning of condensate preheat recirculation pumps and putting it in
service.
 Conducting the function test for motorizing and control valves.
 Startup HRSG for Blow out and normal operation.
 Putting into service the two HRSG’s.
 Supervising pre operational, operational and load performance activities.
 Complete reliability run and performance test as per the client’s request.
 Responsible for managing Facilities Performance Test in line with design
parameters.
 Participates in tuning all controllers to get units to optimum performance.
 Trip testing and interlocks.
 Testing the set values of ERV, relief valves, automatic opening and closing for
motorizing valves and annunciation.
 Assists in setting up of necessary mechanism for prompt complaint rectification
during defects liability period
 Production and submission of all work permits relating to commissioning and
operation activities.
basis.
 Participates in communicates with all project stake holders in a logical,
systematic and timely manner.
 Completes necessary documentation for project turnover to client.
 Plant handover at the end of contract.
 Making on-site training for client engineers.
 Develops the Punch list Management Process with the Owner and consultant.
 Supervises witnessing and certification of system/equipment during mechanical
completion tests, guarantee runs.
 Assists in managing smooth handing-over of facilities to the Asset Holder
Plant Description:
1x750 MW combined cycle power project in EGYPT DAMANHOUR ATF including:
 2x250 MITSUBISHI Gas turbine, H2 Cooled generator.
 Two NEM HEAT RECOVERY natural circulating 2 x 340 T/Hr, 128 Bar, 566 C˚ each
comprising HP system, reheater system, IP system, LP system, condensate
preheat system, steam/water sample system, flue gas analyzing system (CEM),
one de-aerator including feed water storage tank, chemical dosing system, and
two condensate preheat recirculation pumps
 1x250 ANSALDO ENERGAIA Steam turbine, H2 Cooled generator.
______________________________________________________________________
Date : 11/11/2009 – UP to 1/3/2010
Employer : ABB ENERGIETECHNIC AG
Project : Barrage Cheliff M.A.O. WATER PUMPING PLANT

Job title: MECHANICAL COMMISSIONING TEAM LEADER AND OPERATION
MANAGER ENGINEER
Job Description :
 Reporting to the site manager.
 Making heat run test for all motors and pumps.
 Making flushing for pipelines.
 Making operation procedure for the plant to feed water treatment 5 km away and
sending water to storage 9 Km away.
 Leading 9 Km pipelines filling without auto vent valves.
Plant Description :
68400 m3/hr water pumping project at ALGERIA / MOSTAGANEM / ARZUE /ORAN
(M.A.O.) including:
 5 Flowserve pumps, 5700 m3/hr capacity and 203 m head to supply water to a
reservoir located at 5 km distance and 271 m height for providing water to Oran at
150 km distance.
 7 Flowserve pumps, 5700 m3/hr capacity and 156 m head to supply water to
Kerrada Dam located at 7 km distance and 92 m height for storage.
____________________________________________________________________________
Date : 1/7/2009 – 10/11/2009
Employer : TOSHIBA (TPSC/TTC)
Job title: MECHANICAL COMMISSIONING TEAM LEADER AND OPERATION
MANAGER ENGINEER
Job Description :
 Prepare procedure and schedule for systematic and sequential pre
commissioning / commissioning / start-up/ operation of plant from the
engineering / technical documents / vendor information.
 Reporting to the site and project manager.
 Holds regular review meetings with the consultant and client.
 Supporting cp101 in reliability test for Gas turbine.
 Making heat run test for all motors and pumps.
 Making flushing for Potable water system, raw water system, air conditioning, fuel
oil system, circulated water system, sump pump, condensate system, feed water
system, chemical cleaning for the condensate and feed water systems.
 Complete reliability run and performance test as per the client’s request.
 Delivers Training to Operators and Maintenance team, ensures operators training
level is adequate.
 Ensures that allocated commissioning systems reach milestone targets in due
time as per schedule, and considering multi disciplines vision...
 Participates in pre-construction Engineering reviews and project planning
project.
 Controls and validates tests results.
 Signs Tests sheets.

basis.
 Requests and defines Permit to Work and related documentation for
commissioning activities.
 Follows project schedule targets.
 Prepares and reviews Commissioning documentation (procedures, method
statements).
 Managing all aspects of pre-commissioning, commissioning and checkout,
through initial energizing, heat-up and startup of the new process and associated
systems.
 Communicates with all project stake holders in a logical, systematic and timely
manner.
 Completes necessary documentation for project turnover to manufacturing.
Plant Description : As described before
______________________________________________________________________
Date : 3/4/2009 – 30/6/2009
Employer : EGYPTROL as subcontractor for TOSHIBA (TPSC/TTC)
Job title : MECH. COMMISSIONING MANAGER ENGINEER
Job Description :
 Leading the commissioning team for the commissioning of combined cycle
operation with the mechanical works contract (CP-118) –Toshiba plant systems &
services Co.
 Making flushing for closed cooling system, Demi water system, service water
system, firefighting system, air compressor system, service gas system and
lubrication water system
______________________________________________________________________
Date : 15/1/2008 - 3/4/2009
Employer : UPPER EGYPT ELECTRICITY PRODUCTION COMPANY (UEEPC).
Project : ASSIUT THERMAL POWER STATION
Job title : OPERATION MANAGER
Job Description :
 Lead and coordinate station operation activities.
 Manage and prioritize workloads.
 Make analyses for operation trouble-shooting.
 Prepare procedure for systematic and sequential pre commissioning /
commissioning / start-up of plant after maintenance from the engineering /
technical documents / vendor information.
 Supervise work according to routine maintenance schedules for plant and
equipment.
 Ensure the setting up of safety and precautionary requirements and procedures
are followed before, during and after maintenance.
 Making daily technical reports about the unit's abilities & efficiencies for
Operation Manager.
 Team leader & coordinator of operation activities schedules with other internal
departments and with the dispatch centre.
 Provide effective support to the team to maximize the contribution made to the
plant objectives.

 Delegates effectively and creates a work climate where people succeed and
empowers people to take action.
 Demonstrates the ability to influence events and achieve objectives to time and
budget.
 Holds regular review meetings with the maintenance departments to resolve any
equipment related problems
 Trainer for operation engineers.
Plant Description:
2 x 312 MW steam power plant in EGYPT / ASIUT including:
 MITSUBISHI ball firing dual fired (N.G. /HFO) drum type, forced circulation, reheat
boiler with 2 x 50% FD /GR fans, air heater, Soot blowers, etc.
 ANSALDO front & rear burners dual fired (N.G./HFO) drum type, natural water
circulation, reheat boiler with 2 x 50%FD/GR fans, air heater, Soot blowers, etc.
 Toshiba STG with H, IP and LP cylinders, H2 cooled Generator and FRANCO TOSI
river water cooled Condenser with C.H. ZIKESCH GMBH. HP, SULZER LP Steam
Bypass systems.
 ANSALDO STG with H, IP and LP cylinders, H2 cooled Generator and river water
cooled Condenser with REXROTH HP/LP Steam Bypass systems.
 BOP including 7 Stage regenerator feed water heaters, Circulating water, 2x 50%
MFWP and 1x 100% TFWP, Closed cooling water, Compressed air, EDG, Fuel
handling, Ball cleaning, Aux Boiler and TELEDYNE ENERGY H2 production
Systems.
____________________________________________________________________________
Date : 14/10/2007–14/1/2008
Employer : KOCH/SIEMENS CONSORTIUM.
Project : AL-NASERRIA POWER PLANT EXTENSION
Job title : START UP /SHIFT CHARGE ENGINEER.
Job Description :
 Responsible for conducting plant start-up activities during the shift
 Maintain efficient power plant stability during performance, reliability and grantee,
tests
Plant Description :
3X115 Combined Cycle Plant in Syria DAMASCUS comprising:
 3 Fiat Avio gas turbine, 115 Mw each
 One Siemens Steam Turbine 150 Mw with HP & LP casing.
 Siemens Air Cooled Generator.
 HP & LP bypass system,
 Direct contact jet condenser cooled by dry air cooling tower.
 NEM HRSG with HP & LP drums and forced recirculation pumps.
 BOP including: HP & LP feed water pumps, RO Demi plants, Condensate polisher,
Raw and sanitary water systems, etc.
____________________________________________________________________________
Date : Nov 2006–Oct 2007
Employer : Upper Egypt Electricity Production Company (UEEPC)
Project : Assiut Thermal Power Station
Job title : OPERATION MANAGER
___________________________________________________________________________
Date : March 2001–Nov 2006

Job title : SHIFT CHARGE ENGINEER
Job Description :
 Making daily technical reports about the unit's abilities & efficiencies for Head of
Operation department.
 Supervise and distribute work during the shift.
 Receive and carry out instructions from the power station management.
 Brief, instruct and train subordinate staff according to instructions issued.
 Issue switching instructions prior to issuing a permit to work if the Operation
Engineer does not issue them.
 Carry out/supervise and ensure that safe and proper switching is carried out.
 Issue Permit-to-Work, Sanction-for-Test and Limitation-of-Access in accordance
with regulations.
 Carry out switching as authorised by the management.
 Maintain files and records of instructions, memoranda, etc. in good order.
 Supervise personnel safety and report all hazardous events and accidents.
 Report verbally, and in writing, any faults that have occurred.
 Keep records of operations, faults, switching, hydrological conditions, etc.
 Attend to faults that have occurred in order to rectify them himself or call for
assistance as soon as possible (with due regard to instructions issued).
 At shift change, inform the next shift about the current operating situation,
orders, issued Permits-to-Work and any other matters that are necessary to know
for the operation of the power station.
 Hands over the plant from maintenance in line with the operation schedules and
requirements.
 Anticipating and responding effectively to operational demands and assist in
achieving safe and efficient generation.
 Achieve/exceed operational expectation, maintain power plant stability and assure
station’s operation efficiency.
 Connect & Disconnect Electrical Circuit.
 Administrative executive for the shift.
___________________________________________________________________________
Date : April1994 – March 2001
Job title : OPERATOR SHIFT ENGINEER
Job Description :
 Supervising casual labourers, entrepreneurs’ staff, etc.
 Checking round the plant according to instructions, taking readings of
instruments, gauges, etc.
 Lubricating, cleaning, adjusting and carrying out minor maintenance work on
equipment and machinery, as specified in the scheduled maintenance chart or as
instructed by the Shift Charge Engineer.
 Assisting the Shift Charge Engineer and the Control Room Technician with
operation of switching apparatus that cannot be remotely controlled from the
Control Room, trouble-shooting, etc.
 Assisting the Shift Charge Engineer in operational duties outside the Control
Room.
 Reporting abnormal observations, faults, etc. to the Shift Charge Engineer.
 Carrying out any other duties or instructions delegated.
 Making quality decisions and exercise sound judgment.

 Control of active and reactive power, voltage, current, temperature, etc. according
to settings.
 Start up, synchronize, lead and shut down units as required.
 In case of system disturbance, normalization of system through safe and
accepted switching procedures.
 Perform all switching that can be done from the control room.
 Monitor, control, record and report indications, alarms, trips, faults and
abnormalities observed.
‫ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ‬
Additional Work:-
 In long maintenance period works as assistant maintenance engineer in parallel
with my basic work.
 Co-operating with Mitsubishi Company in internal chemical cleaning of 1085
Ton/hour water tube boiler.
 Working in external chemical cleaning of super heaters & reheaters of 1085
ton/hour steam generator.
 Working in internal chemical cleaning of condenser tube side.
References
Name Email Company Position Telephone
George Ioannou George.Ioannou@metka.gr
METKA COMMISSIONING
MANAGER
+302102709234
+306948250805
Nicole Roy
Nicol.roy@samsung.com
nroy11@gmail.com
SAMSUNG COMMISSIONING
MANAGER
+966515087805
Robert Taylor
bobandsunyang@hotmail.com
Robert.w.taylor@worleyparsons.com
Worley
parsons
COMMISSIONING
MANAGER
+966 13807 9827
+966503897540
Mathew Bird mattbird26@hotmail.com SAMSUNG
Mechanical
Commissioning
Manager
+447452370362
MR. FERDINAND
SLUPINA
ferdinand.slupina@cosinus-phi.com COSINUS
PHI
HR MANAGER +491703203142
MR. FRANK
HAENTSCHEL
frank.haentschel@de.abb.com
ABB COMMISSIONING
MANAGER
+496213818204
MR. ROBERT
PENTEN
pentenr@aol.com
NEM OPERATION
MANAGER
+441777704170
MR. THOMAS
SCHOLZ
thomas.scholz11@freenet.de
NEM COMMISSIONING
MANAGER
+306949210414
MR. KANAI
SADAMICHI
kanai.sadamichi@toshiba-tpsc.co.jp
TOSHIBA SITE MANAGER
+81455007611

Magdy hussine cv

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (6)

Similar to Magdy hussine cv

Similar to Magdy hussine cv (20)

Recently uploaded

Recently uploaded (18)

Magdy hussine cv