Ahmed is seeking an international opportunity where he can fully utilize his skills. He has a B.Sc. in mechanical power engineering and experience in various power plant roles over 10+ years, including gas turbine operation and maintenance, commissioning, and advisory services. His technical skills include turbines, HRSGs, compressors, and plant equipment. He is proficient in English, Microsoft Office, and has leadership experience.

1. OBJECTIVE
CURRICULUM VITAE
Ahmed Wahba Mohamed Elhamamssy
Cell Phone:
+2 01091199038
Personal E-Mail: - shahd20055@yahoo.com
Work E-Mail: - ahmed.wahba@ge.com
Alias: - 605002256
Seeking an opportunity in an international entity where I could embark upon challenging
responsibilities enabling full and optimal application of my abilities and aspirations, working in
an environment where I would be able to grasp new skills as well as develop my professional
business behavior.
EDUCATION
Diploma: - In Power Plants (Gas Turbine Engine
Maintenance) Date of Obtaining Degree: - J u n e 2012
Overall Grade: - Very Good (76. 5%)
Graduation Project Grade: - Excellent
University: - MANSORA
B.Sc:- Mechanical Power Engineering
Faculty: - Engineering
University: - MANSORA
University Location: - MANSORA, Egypt
Date of Obtaining Degree: - May 2007
PERSONAL DATA
Military State : finished
Date of Birth : 07/06/1984
Nationality : Egyptian
Marital State : Married
Address : Egypt - Damietta - Kafr saad
Current Address: Assiut

2. TRAINING
September 2013 1.SPPA-T3000 Simulator
Location: SIEMENS Quad3-University street –Orlando-
Florida-USA.
2. Gas Turbine operation Siemens SGT6-5000F (5)
Location: Qurayyah IPP - Saudi Arabia
3. Steam Turbine Familiarization Siemens SST 6-4000(DN)
Location: Qurayyah IPP - Saudi Arabia
4. Atlas-Copco Gas compressor training
Location: Qurayyah IPP - Saudi Arabia
Location: Qurayyah IPP -
Saudi Arabia
Location: GE Office –
Egypt July 2016
5. GCB(Generator circuit breaker)
Location: Qurayyah IPP - Saudi Arabia
6. HRSG system
Location: Qurayyah IPP - Saudi Arabia
7. Vibration Monitoring system.
Location: Qurayyah IPP - Saudi Arabia
8.IOSH Managing safely awareness
Authorized IOSH Trainer -185623
Mostafa Khalil

3. WORK EXPERIENCE
October2015 till now * O&M Advisory Services leader:-
West Assiut –Egypt
combined cycle Power
Station (8x125Mw) GTs GE
9E.
My duties include:
1. Advise and make recommendations to Owner
Representative concerning the requirements for
operations and maintenance of the Facility.
2. Advise and make recommendations to the
Owner Representative on the performance and
recording of periodic operational checks and
tests of Facility equipment in accordance with
Owner’s requirements.
3. Advise and make recommendations to Owner
Representative regarding requirements for
environmental, health and safety compliance
management.
4. Recommend a maintenance strategy based on
a Reliability Based Maintenance program and
monitor effectiveness of the preventative
maintenance program.
5. Coordinate and facilitate the preventive
maintenance program for the Facility including
assist in outage planning.
6. Assist site staff to implement a comprehensive
set of operations and maintenance procedures
covering all aspects of operation.

4. 7. Analysis of inventory management, critical
spare parts and recommendations to maintain
optimum spares stock.
8. Make recommendations to Owner for any
identified areas of improvement that will result in
lower cost operation or increased efficiency and
output.
 Summary of progress against targets.
 Information related to the Work scope
reasonably required by Owner.
 Report immediately to Owner verbally,
(written report within 24 hours) of any
incident, as they become aware of it, occurring at
the plant and relating to health &safety that in
their opinion requires immediate response.
Reference:-
Kevin Hagan
Senior O&M/Station Manager, PWR-PGS-MEA
Middle East Africa
kevin.hagan@ge.com
Mobil : 00447920711039

5. May 2013 till October2015
First National Operation and
Maintenance Co. Ltd (NOMAC)
*May 2013 till Present
*Shift coordinator and CCR: -
Qurayyah QIpp combined cycle
(6x 700 Mw) PowerStation –Saudi Arabia
Performing:
-Six Modules Each Module Consists Of
A) Two Siemens combustion Gas Turbine produce
231MW type SGT 5000F (5)
B) Two BHE horizontal type heat recovery steam
(HRSG)
C) One Siemens steam turbine 231MW type SST 6-
4000(DN) HP AND LP steam lines
D) Chiller system which contain two phase each phase
contain:
1- One Thermal Energy Storage tank.
2-Ten working Secondary Chilled Water Pumps
3-Eight chiller modules
E) Gas Station which contains:-
1- Two Emergency shut-down (ESD) valves
2-Dry scrubber
3-Two Filter separators
4-Gas metering station
5-Thirteen gas compressor type Atlascopco
6-Seven Dew Point heater type
7-PRV area contains seven lines.
* Commissioning and startup Engineer
I attend all Construction and commissioning works such
as:-
- Lube oil, Liquid fuel and Gas Fuel system
commissioning.
-Heat run test and solo run test for pumps.
-Gas and steam turbine commissioning and startup
procedure and all there tests.
-12HRSG`S steam blowing.
-All BOP commissioning and startup procedure.
-All groups tests such as performance test, RTR test and
NDC test etc.
3

6. October 2011 – Feb. 2013
Egyptian Maintenance Company
(EMC)
Position:
Senior mechanical maintenance engineer
Responsibilities:
1. Daily checkup for all rotating equipment.
2. Corrective maintenance for [centrifugal pumps –
centrifugal compressors –screw compressors –
liquid ring compressors – centrifuges – high speed
– Vertical submersible pumps – gear pumps]
3. Preventive maintenance( weekly - monthly - 3
monthly - 6 monthly – yearly) for [centrifugal
pumps – centrifugal compressors –screw
compressors – liquid ring compressors –
centrifuges – high speed (sundyne) pumps –
vertical submersible pumps – multistage pumps –
gear pumps]
4. All trouble shooting for pumps.
5. All trouble shooting for compressors.
6. All trouble shooting for centrifuges.
7. Managing all plant technicians' time sheets,
attendance, overtime and shift schedules.
8. Carrying out all jobs risk assessment.
9. Following the condition monitoring and vibration
analyses reports & predictive maintenance for all
rotary equipment.
4

7. May2012 till 30 September
2012
East Delta Electricity
Production Co. (EDEPC).
Damietta Combined Cycle
Power Station
Position:
Senior Shift Supervisor Engineer
Responsibilities:
-Three Modules Each Module Consists Of
• 145MW GEC ALSTHOM Steam Turbine.
• 500 ton / hr BORSIG HRSG.
• Gas Turbine 135MW Operation engineer
(SIEMENS SGT5-2000E (V94.2)).
-Operating & controlling equipment through D.C.S
(Westinghouse).
* Ensure plant is running at optimal level, by
reading trends and paying attention to detail to
notice possible problems before they happen.
* Report all plant upset conditions during Shift
engineers.
* Operating & controlling equipment through
ovation system control (EMERSON process
management company)
October 2010 till 30 Marsh 2011
East Delta Electricity
Production Co. (EDEPC).
Damietta Combined Cycle
Power Station
Position:
Operating & monitoring plant auxiliaries.
Responsibilities:
Operating & monitoring plant auxiliaries like:
 Instruments & service air compressors (2
stages, 9 bars, with dryer).
 Diesel generators (2.4 M.W., 6.3
Caterpillar).
 Intake & water pump house and its D.C.S.
control.
 Closed cooling water, service water &
Circulate water.
 conditioning system (chiller).
 Operation in oil separators
5

8. April 2008-September 2010
East Delta Electricity
Production Co. (EDEPC).
Damietta Combined Cycle
Power Station
Position:
Operation engineer Siemens gas turbine
Responsibilities:
Operating & monitoring 135M.W gas turbine units
SIEMENS SGT5-2000E (V94.2).
 Operation and monitoring performance of
SIEMENS SGT5-2000E (V94.2) single shaft
single casing – twin vertical combustion
chambers-135MW base load unit gas
turbine.
 Carry out starting, normal operation,
Shut-down and stand still.
 Trouble shooting analysis.
 Analyze gas turbine faults and upsets
investigate and recommend solutions.
 Monitoring all readings of pressure,
temperature, flow rate, vibration, valve
position, liquid levels and power generated.
 Taking all steps to restore the normal
Operating condition in case of readings
change due to causes not associated with
The mode of operation.
SKILLS
Computer Skills
 Excellent knowledge of Microsoft Windows (Vista, XP, 2000, ME, 98).
 Excellent knowledge of Office (Word, Excel, PowerPoint).
 Excellent knowledge of Internet applications.
Key Characteristics
Analytical, Organized Excellent communication skills
Fast learner Problem-solving oriented
Highly-motivated
Time management
Work under pressure &Team Worker
Leadership and Decision making
LANGUAGES
 Arabic: Mother tongue
 English : Excellent spoken, read, listen and written
6

9. INTERESTS & ACTIVITES
Professional Interests
 Researching new technologies
 Open source software
 Utilization of current technologies to design possible solutions for current and future
problems
Hobbies
 Playing football.
 Reading
Availability : I’m able to start work after 30 days of announcement
As : Full Time
With my best regards and my wishes to be one of your successful team
AHMED
7