1. HARIS HAKIM
Jalan Kramat Sentiong Masjid No E 102
Jakarta Pusat, Jakarta - Indonesia
Phone: 08561066149  E-Mail: harishakim14@gmail.com
DoB: September, 14th 1990
Male, Indonesian.
Objective
A position in Electrical Engineering, especially in Power System, with interest in design of electrical
power system, system protection, distribution and transmission.
Education
Electrical Engineering – Universitas Indonesia 2008 – 2012
Majoring in Power System Engineering – GPA : 3.13 out of 4.00
Organizational Record:
Badan Eksekutif Mahasiswa FTUI 2011 Head of Human Resource Development Division
Ikatan Mahasiswa Elektro FTUI 2010 President
SMAN 21 Jakarta 2005 – 2008
Working Experience
PT ABB Sakti Industry | http://www.abb.com - July 2016 – Now -
Job Title : Electrical Engineer / Proposal Engineer
Main Activities :
Prepare technical and commercial proposal for bidding/tendering New Facility, Revamp and Upgrade Oil
& Gas and Petrochemical Project.
Provide technical solution and support for sales team during bidding/tendering and or execution of the
project.
To explore new project or opportunities from customer, client or potential client.
Provide technical support for Installation, Start-up, Commissioning of Electrical Equipment and technical
query’s issue on site
PT Synergy Engineering | http://www.ptsynergy.co.id - January 2016 – July 2016 -
Job Title : Electrical Engineer
Main Activities :
Prepare project proposals and Detailed Engineering Design (DED) deliverables documents and activities for
Oil and Gas Conceptual Design, FEED, New Facility, Revamp and Upgrade Project in accordance with the
contract, client specifications and industry standards.
To do Discussion, Meeting and Coordination with client or vendor, Interdisciplinary Check/Info, Vendor
Quotation & Document Review and communicates & coordinates project activities with project engineer,
procurement, management, and others.
Provide technical support for Installation, Start-up, Commissioning of Electrical Equipment and technical
query’s issue on site
PROJECT INVOLVED
Project : General Project Support Services
Client : PT Tropik Energi Pandan
Responsibilities :
 Perform as Electrical Field Engineer / Project Engineer
 Monitoring Installation and Client Inspection of Electrical Equipment
 Monitoring Progress of Pre-Commissioning

2.  Communicates and coordinates project activities with Client, Main Contractor, project engineer,
management and others as needed.
(February 2016 – July 2016)
Project : Jasa Konsultansi Pipeline Onshore Offshore FSRU RU IV Cilacap
Client : Pertamina Hulu Energi Offshore North West Java (PHE ONWJ)
Responsibilities :
 Prepare electrical calculation report documents (UPS Load List, UPS Sizing Calculation)
 Prepare electrical equipment specification (LV Switchgear/MCC, UPS, LV Motor, Mechanical
Package)
 Prepare electrical drawings (Electrical Overall Single Line Diagram, UPS Single Line Diagram,
Interconnection Diagram, Lightning Protection)
 Check and review document and drawing which prepare by designer (Electrical Legend and
Symbols)
(March 2016 – April 2016)
Project : Technical Services Contract for Blanket Engineering Services
Client : Pertamina Hulu Energi Offshore North West Java (PHE ONWJ)
Responsibilities :
 Prepare electrical calculation report documents (Electrical Load List, Electrical Cable Sizing
Calculation, Lighting Calculation, Power System Study)
 Prepare electrical drawings (Electrical Overall Single Line Diagram, UPS Single Line Diagram,
Hazardous Area Clarifications)
 Check and review document and drawing which prepare by designer (Electrical Cable
Schedule, Electrical Lighting and Small Power Panel Schedule, Electrical Cable Tray/Ladder
Layout, Electrical Switchgear Room Layout, Power and Control Cable Layout, Lighting Layout,
Grounding and Lightning Protection Layout)
 Prepare electrical datasheet (LV Switchgear/MCC Datasheet, Power and Control Cable
Datasheet, Lighting and Small Power Panel Datasheet)
 Prepare Electrical Material Take-off
(February 2016 – Mei 2016)
Project : Provision of Blanket Engineering Services
Client : Pertamina Hulu Energy West Madura Offshore (PHE WMO)
Responsibilities :
 Prepare electrical calculation report documents (Electrical Load List)
 Prepare electrical drawings (Electrical Overall Single Line Diagram, UPS Single Line Diagram)
(January 2016 – February 2016)
PT Tripatra Engineering and Constructions | http://www.tripatra.com - Nov 2012 – Jan 2016 -
Job Title : Electrical Engineer
Main Activities :
Prepare project proposals and Detailed Engineering Design (DED) deliverables documents and activities for
Oil and Gas New Facility, Revamp and Upgrade Project in accordance with the contract, client
specifications and industry standards.
To do Discussion, Meeting and Coordination with client or vendor, Interdisciplinary Check/Info, Vendor
Quotation & Document Review and communicates & coordinates project activities with project engineer,
procurement, management, and others.
Provide technical support for Installation, Start-up, Commissioning of Electrical Equipment and technical
query’s issue on site

3. PROJECT INVOLVED
Project : Jangkrik Floating Production Unit
Client : ENI
Responsibilities :
 Modelling Electrical Power System Design, Analyzing the respective result of Power System
Software Simulation (Load Flow, Short Circuit, Motor Starting, Harmonic, Transient Stability & Re-
acceleration study, Protection & Coordination and Arc Flash) and Producing Report from the
Analysis.
 Provide technical support for purchasing Electrical Equipment (Generator, Switchgear,
Transformer, UPS and Power Distribution Board).
 Provide technical support for preparing project document (Load List/Load Balance document,
Single Line Diagram & Schematic and Load Shedding Study Report).
 Prepare team check review for vendor document (Generator, Switchgear, Transformer, Motor
and Cable).
(January 2014 – Now)
Project : Musi Timur
Client : Indo Turbine / Pertamina EP
Responsibilities :
 Assigned as Technical Support & Consultant for Indoturbine Detail Design Engineering Team.
 Prepare scope of work and man-hour estimation for Electrical Engineering Team.
 Prepare and monitoring Project Schedule.
 Review project deliverables which prepared by Indoturbine’s Engineering Subcontractor (Basic
Design, Specification, Datasheet, Drawing, Equipment Sizing & Calculation, Electrical Study and
Material Take Off).
 Prepare Technical Bidding Analysis for Electrical Equipment (Generator, Switchgear, AC&DC UPS
and Cable).
 Prepare Vendor Document Review for vendor drawing and document (Generator, Switchgear,
AC&DC UPS and Cable).
 Communicates and coordinates project activities with project engineer, management and
others as needed.
(November 2014 – March 2015)
Project : EPC 1 Banyu Urip
Client : Mobil Cepu Limited (Subsidiary of Exxon Mobil)
Responsibilities :
 Modelling Electrical Power System Design, Analyzing the respective result of Power System
Software Simulation (Load Flow, Short Circuit, Motor Starting, Harmonic, Transient Stability &
Reacceleration study, Protection & Coordination and Arc Flash) and Producing Report from the
Analysis.
 Provide technical support for purchasing Electrical Equipment (Generator, Switchgear,
Transformer, Is-Limiter, ECMS, UPS and Power Distribution Board).
 Provide technical support for preparing project document (Load List/Load Balance document
and Single Line Diagram & Schematic).
 Prepare Electrical Load Shedding Study Report.
 Prepare Cable Sizing & Cable Schedule Document.
 Prepare Project Query / Technical Query.

4.  Prepare document relates to project deliverables (Datasheet, Material Take-off, Request for
Quotations and Technical Bidding Analysis).
 Prepare team check review for vendor drawing and document (Generator, ECMS, Is-Limiter,
Switchgear, Transformer, Motor, Cable and Cable Tray and Ladder).
 Provide support and answer for technical query’ issues on site. (Installation, Start-up and
Commissioning of Electrical Equipment).
 FAT LV & MV Switchgear, LV & MV Cable, Heat Tracing and Cable Tray & Ladder.
(January 2013 – April 2015)
Proposal : Karaha
Client : Pertamina Geothermal Energy (PGE)
Responsibilities :
 Prepare Load List/Load Calculation, Electrical Sizing Equipment (Generator, Transformer,
Switchgear, UPS and Cable) and Single Line Diagram.
 Prepare BQ of Electrical Equipment (Generator, Transformer, Switchgear, UPS, Cable and Tray &
Ladder and Bulk Material)
 Prepare Technical Summary Narration and Man-Hour Estimation
(December 2012 – February 2013)
Proposal : Kamojang
Client : Pertamina Geothermal Energy (PGE)
Responsibilities :
 Prepare Load List/Load Calculation, Electrical Sizing Equipment (Generator, Transformer,
Switchgear, UPS and Cable) and Single Line Diagram.
 Prepare BQ of Electrical Equipment (Generator, Transformer, Switchgear, UPS, Cable and Tray &
Ladder and Bulk Material)
 Prepare Technical Summary Narration and Man-Hour Estimation
(March 2013 – May 2013)
Skill
Softwares Skill : Language Skill:
Microsoft Office Bahasa Indonesia (Native)
ETAP (Electrical Transient Analyzer Program) English (Professional)
SKM Power Tools – System Analysis
Luxicon
Dialux
Contact Reference
Name : M. Ganason
Relationship : Electrical Engineer - Lead Project at PT Tripatra Engineering and Constructions
Phone : +60124313412
E-mail : ganason3412@gmail.com
Name : Nopran Adriansyah
Relationship : Electrical Engineer - Lead Project at PT Tripatra Engineering and Constructions
Phone : +6281536011500
E-mail : nopran@yahoo.co.uk