1. BEHNAM NIKOUEI - Resume (Electrical Engineer)
Page 1 of 3
BEHNAM NIKOUEI
Solgårdsvej 4 st. th, 2942 Skodsborg, Denmark
Email: b.nikouei@gmail.com
Contact no: +45 50 11 92 37
Expected Salary: Negotiable
Availability: One-month notice
Willing to relocate and travel
SUMMARY
Skilled electrical engineer who is passionate about electrical system integration. Currently
have the challenging and exciting task of developing the LV & Utility Design; responsible
for implementation of the SCADA, HV equipment, and HV Cable installation for offshore
substations.
 More than Six years of professional experience in various aspects of electrical
engineering in oil and gas, petrochemical and renewable energy industries,
 Passionate about learning; thrive in complex engineering environments where
complex array of systems are integrated into a solution. Highly motivated when
working with highly technical solutions for electrical distribution,
 Experienced in basic and detailed design, procurement, installation, commissioning
and startup of substations and electrical plant,
 Competent user of software such as AutoCAD, ECAD, ETAP, EPLAN,
DIALUX, DOCWIN, and PSCAD,
 Fluent in English and Persian, also basic Danish.
WORKING EXPERIENCES
DATE POSITION EMPLOYER
June
Present
2015 Electrical Power and Utility
Design
Dong Energy wind power
(Copenhagen)
http://www.dongenergy.com
Areas of responsibility:
 Preparation of technical mechanical and electrical specifications / requirements
for engineering, fabrication and installation contract,
 Perform cable lists, consumption lists and control panel lists to the EPC
projects,
 Preparation of concept design such as single line, load list, power study and etc.
For LV electrical, utility and mechanical systems,
 Preparation of philosophy for protection and redundancy for the LV electrical
systems,
 Review, the detail design and improve the design. Short circuit and selectivity
study, cable sizing, panel design.
Achievements:
 Completed initial design drawings for LV distribution boards in 2 weeks,
resulting in review and issue for construction drawings being completed ahead
of schedule.
 Improve projects specification, concept design resulting in costing and quality
in main while reduce the overall time schedule. Resulted in 10% cost saving on
LV utility equipment.

2. BEHNAM NIKOUEI - Resume (Electrical Engineer)
Page 2 of 3
Projects:
 Gode Wind 1 and 2 offshore wind farm.
 Race Bank 1 and 2 offshore wind farm
 Walney 3 and 4 offshore wind farm
 Hornsea 1 offshore wind farm
DATE POSITION EMPLOYER
June
October
2013
2014
Electrical Design Engineer
Sepahan Beyond Research (SBR)
http://www.sbr-co.net
Areas of responsibility:
 Performed Network Study on Transmission from topside to consumers,
harmonics, load flow, earth faults, short circuit, steady state,
 Created design verification plans / procedures and conduct tests for design
validation,
 Prepared all types of electrical drawings, including single line diagrams,
interconnection diagrams, and cable schedules using AutoCAD and Eplan,
 Performed electrical equipment sizing calculations such as electrical system
analysis, UPS sizing, cable sizing, capacitor bank sizing, lightning calculations
and lighting calculation,
 Prepared detailed installation drawings for all electrical and instrumentation
equipment and systems,
 Support site / installation team activities and vendor document review.
Projects:
 Gol-e-Gohar II Pelletizing Plant,
 Wastewater treatment plant for Sepahan Oil Company.
Achievements:
 Completed design drawings for LV switchboards panel, earthing and lightning,
lighting, cable routing drawing and project specification in 42 weeks, resulting
in review and issue for construction drawings being completed ahead of
schedule,
 Improve drawing and costing for projects.
DATE POSITION EMPLOYER
May
September
2009
2011
Electrical Engineer / Electrical
Design engineer
Regal Petrochemical Company
http://www.regalpetro.com/
Areas of responsibility:
 Ensuring the technical success of the projects while taking into account
(and/or optimizing) the technical, quality and schedule requirements and the
cost frame,
 Responsible for design and engineering activities in preparing the
following: substation Equipment Layouts, review of vendor inputs and
schematics and design of the LV/MV switchgear arrangements, lighting and

3. BEHNAM NIKOUEI - Resume (Electrical Engineer)
Page 3 of 3
small power distribution design and engineering activities and preparing
drawings,
 Vendor Document review for Electrical Primary/ Secondary Equipment
FAT report. SAT Report Preparation/Verification and Method of statement
Preparation for Commissioning.
Project Completed:
 Nafis agro industrial company,
 Regal petrochemical company, Regal petrochemical expansion plant
(160000 ton/year).
Achievements:
 Improve the project quality and reduce the cost,
 Improve time schedule for delivery documentation and finalize the project
more than 15%.
DATE POSITION EMPLOYER
April
April
2008
2009
Electrical Commissioning
Engineer
GS Engineering & Construction
http://www.gsenc.com/
Areas of responsibility:
 Receives Project documentation and understands scope of work and what is
required,
 Testing and commissioning of south pars at Oil & Gas field,
 Responsible to supervisor of substation,
 Responsible for test and running the motors in the fields,
 Responsible for preparing the technical and operation report,
 Responsible for running the preventive maintenance of electrical equipment,
 Running the troubleshooting, Solo run test, rotation test and loop check.
Project Completed:
 South Pars Gas Field development phase 9 & 10 in Iran.
Achievements:
 making improvements to, and offering advice about, operational procedures,
 scheduling and coordinating work to tight deadlines.
EDUCATION QUALIFICATIONS
DATE DEGREE UNIVERSITY
September
March
2011
2013
Master of Electrical Engineering
(Power)
Malaysia Tenaga Nasional University
(UNITEN)
September
January
2003
2005
Bachelor of Science in Electrical
power
Azad University of Iran.