1. CURRICLUM VITAE
1 PERSONAL DATA
Name : D’Amato Massimiliano
Date of Birth : 01/05/1962
Location : Via Roma 23B
17041 Altare (SV)
Telephone : 019 / 584805 (Home)
02 / 39223370 (Office)
340/2285730 (Company Mobile)
2 SCHOOL QUALIFICATION
Diploma of Secondary School Education.
III Lev. NDT SNT-TC1A metodi RT – UT – MT – PT – VT
3 ADDITIONAL COURSES & TRAINING
1984 - Software programming course by COBOL language, at Istituto Preparazione
Impiego of Savona.
1984 - Course of Non-destructive examinations (UT & RT methods) at Gilardoni
S.p.A. of Mandello Lario (CO).
1985 - Course of Metallurgy and Technologies of Weldings at the company
TECNICONTROL S.r.l. of Savona, held by Ing. Bettini of Istituto Italiano
della Saldatura (IIS)
1985 - Course of Non-destructive examinations (four methods) at
TECNICONTROL S.r.l. of Savona, held by Ing. Bettini (III level CIC-PND,
four methods) and by Mr. Andreone (III level CIC-PND MT – PT methods),
with subsequent award of the II level (Operative).
1987 - Course of Metallurgy applied to welding processes, with specific references
to the results of the mechanical tests and chemical analysis, at CPM S.p.A. of
Genoa / Voltri, held by Ing. Massa of Istituto Italiano della Saldatura (IIS)
1992 - Course of Non-destructive examinations (four methods) at Foster Wheeler
Italiana S.p.A. di Corsico (MI), held by Mr. M. Galli (III level CIC-PND four
methods), with subsequent award of the II level (Inspector).
1992 - Advanced Course for Pressure Vessel inspector at Foster Wheeler Italiana
S.p.A. of Corsico (MI), held by Ing. Lautieri (Director of ISPESSL Bergamo
site).
1993 - Course of Quality Assurance Auditors, at Foster Wheeler Italiana S.p.A. of
Corsico (MI), held by Ing. Passarini and by Mr, Coin of EBASCO.
1993 - Course of General Project Management and Personnel Management, at
Foster Wheeler Italiana S.p.A. of Corsico (MI), held by F.W.I. Managers
together with academic professors of “UNIVERSITA’ BOCCONI”.
1994 - Master course to the norme ISO 9001 , at Foster Wheeler Italiana S.p.A. of
Corsico (MI), held by Ing. Povoleri (F.W.I. Q.A. Manager).
2. 1997 - Master course of Non-destructive examinations (four methods), at Foster
Wheeler Italiana S.p.A. of Corsico (MI), held by Ing. Lautieri (Director of
ISPESSL Bergamo site), to obtain the re-certification to comply with the new
rules of the European Norm N° 473.
1997 - Couse for “Q.A, Internal Auditors” at Foster Wheeler Italiana S.p.A. of
Corsico (MI), held by Ing. Serpieri technical consultant for the company
QSA of Genoa.
1998 - Course related to “Health & Safety of inspection activities at source”, at
Foster Wheeler Italiana S.p.A. of Corsico (MI), held by the company A&S
(Ambiente & Sicurezza) of Milano.
2001 - Attendane to several seminars related to the application of the new european
norm for Pressare Equipments (PED)
2003 - Basic course to the Enterprise Quality Management System against the rules
of the new norm ISO 9000 (Vision 2000), held by Ing. Colombo, with
subsequent award of “Q.A. AUDITOR” both for internal and for external
(suppliers) audits.
2004 - Advanmced Course for the application of the rules of 97/23/CE Directive
(PED) organized by Consorzio Europeo Certificazione (CEC), held by
several teachers as for Mr. A. Fugazzi (Member of the Europea Committee
for PED).
2005 - Professional Course as Plant Inspector of industrial systems (Oil & Gas –
Chemical) against the requirements necessary for 'the application of Directive
97/23/EC (PED) organized by the European Consortium Certification (CEC)
2005 - Professional Course "Fundamentals of Project Management" at
TECNIMONT S.p.A. , held by outside consultants of the Polytechnic of
Milan.
2007 - Seminar related to the use of “Phased Array” & “Toft” technique for welding
check in pressure equipments at IIS Genoa site.
2008 - Seminar related to the use of high alloy materials in chemical plants (high or
low temperature design conditions) at IIS Genoa site.
2008 - Seminar on Management & Control of Complex Projects, at IPMA Milan
site.
2009 - Seminar on internal cladding in pressure equipments, at IIS Genoa Site.
2010 - Seminar on the Principle and Contents of ISO 9001-2008
2012 - Training course for workers subject to Low & high risk (according to
Legislative Decree N. 81/2008)
2013 - Training course on Safety in confined Spaces and use of PPE (Personal
Protective Equipment) Category III to prevent accident in work at height.
2013 Training course of TOFD & PHASED ARRAY technique,
to obtain the Inspection Level II certification.
2014 Advanced English course for student Level “C2” (45 hours total) at British
Council
3. 2015 - Advanced Course for preparation to substain the exams of III Lev. SNT-
TC1A of RT – UT – PT – MT – VT methods.
4 WORK EXPERIENCES
02/84 – 05/86 Recruited by TECNICONTROL S.r.l. of Savona, as a technician in
charge of internal Quality Control Dept. for preparation of N.D.T.
technical specifications, and perform inspection of Pressure Vessels
and naval welding & construction.
06/86 – 09/87 Recruited by C.P.M. of Genova / Voltri, as inspector (welding &
assembly) of Pressure Vessels and resident quality assistant at naval
yards and pipelines
10/87- 01/88 Recruited as external consultant by the company SIGE S.r.l. of
Genoa / Bolzaneto, as resident inspector at naval yards
02/88 – 03/89 Recruited as external consultant by the company MOODY
TOTTRUP S.r.l. of Genoa, as quality assistant for review and
acceptance of the Q.C. certification relevant to the construction of the
Off-Shore Drilling Rig SAIPEM “SCARABEO 5” manufactured by
FINACANTIERI yard of Genoa / Sestri Ponente.
At the same time I’ve also performed inspections at source on the
quality of manufactured goods to be installed on the construction
above.
04/89 – 12/89 Recruited by the company FINCANTIERI S.p.A. (Merchant Ship
Division) yard of Genoa / Sestri Ponente, as technical employee in
the Qualty Assurance Team specifically formed for “SCARABEO
5” Project, with also tasks for Exp./Insp. at source of manufactured
goods to be installed on the construction above.
01/90 – 09/90 Transferred to the Central Technical Office FINCANTIERI in
Trieste and involved in the definition and drawing-up of the technical
specifications for working processing and production (welding &
assembly) relevant to the construction of the Off-shore Drilling Rig
“SANA”.
10/90 – 12/90 Returned to Genoa yard assigned to the Quality Assurance Dept. to
develop the new operating procedures for internal testings to apply
during the construction of SANA drilling Rig.
01/91 – 4/02 Recruited by FOSTER WHEELER ITALIANA S.p.A. of Corsico
(MI), as Project Exp. / Insp. Co-ordinator.
Since Mid ’93 to the entire ’94 appointed as deputy manager for the
co-ordination of activities (Procurement area) aimed to obtain ISO
9001 certification.
Since the beginning of ’98 assigned to cover a new corporate position
as “PROJECT MATERIAL MANAGEMENT COORDINATOR” to
unify in one person the follow-up of all Procurement activities
(supplier qualification, purchasing, expediting, inspection and
shipping) relevant to a single project
This position directly refers to the Project Manager or Director and
the final Client to define the actions needed to keep the fixed
operative objectives.
4. 05/02 – 05/06 Recruited by TECNIMONT S.p.A. of Milano as Project Exp. / Insp.
Co-ordinator
This position is placed at the same level of the Procurement Co-
ordinator and directly refers to the Project Manager or Director to
define the actions needed to keep the fixed operative objectives; the
final Client is normally involved for information only.
Following a reassessment of internal skills, and to reach an
optimization of the external activities, the original position was
modified in Testing Group Leader, changing the scope of work from
a material management focused on a singular project to a global
involvement on the management of all material purchased for all
active projects divided by category (Machinery – Pressure Vessel –
Piping – Electrical & Instrumentation).
06/06 – today Recruited by SIIRTEC NIGI S.p.A. of Milano, as Material
Management Coordinator and later on appointed as Manager of
Exp/Insp. Dept. for all projects in charge of Process Plant and
Package Division.
This position is directly linked to the director of the Project
Execution and it is fully integrated in the company general system of
Procurement & Material management with the main scope to
guarantee a constant monitoring of the procurement activities against
the job schedule and field erection program
5 LANGUAGES
ENGLISH : Professional
FRENCH : Scholastic
F IRMA