1. BOBBY MCCLURE
6633 McCrary Road Ext. Semmes, AL 36575
Phone: (334) 830-5017
________________________________________________________________
OBJECTIVE: Looking to get with a stable company where the work is
steady and offers the opportunity for advancements in skilled trades.
EDUCATION:
Alabama Southern Community College GED (1997)
EXPERIENCE:
March 2015-present
NCCCO Cerfified Crane Operator
Power, Incorporated
Theodore, AL
• used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges
rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed rigged skid pans and heavy tools
• cranes operated: from 50 ton rt to 130 ton rt
January 2015-March 2015
NCCCO Cerfified Crane Operator
TNT Crane & Rigging
Norco, LA
• used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges

2. rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed rigged skid pans and heavy tools
• cranes operated: from 50 ton rt to 130 ton rt
March 2014-January 2015
NCCCO Certified Crane Operator
Dacatoah West Crane Service
Williston, North Dakota
• setting base pads for pump jack units and putting pumping jack units
together
• setting signs
• setting ac units
• performing wireline operations
• breaking down cranes and moving cranes
• loading and unloading various sizes of tanks
• loading, unloading, and setting compressor buildings
• weight adjustments, setting rotoflex, setting concrete pads
• two dual crane lifts
• performing resets of pump jacks and resets of rotoflex
• loading and unloading equipment off of 18 wheeler trucks
January 2014-March 2014
NCCCO Small & Large Mobile Hydraulic Crane Operator
Zachry Construction Corporation
Corpus Christi, Texas
• moving cranes to location of job
• setting up cranes, hoisting up materials, tools, and equipment
• breaking down cranes and moving cranes
• small maintenance on cranes such as greasing: booms, winches, cables,
ball &blocks, load line cables
• pulling exchanger bundles using aerial exchanger bundle extractor and
reinstallation of exchanger bundles
• cranes operated: from 8 ton carry deck to 350 ton truck crane
November 2013-December 2013
NCCCO Small & Large Mobile Hydraulic Crane Operator
PTS Travelers

3. Tioga, North Dakota
• moving cranes to location of job
• setting up cranes, hoisting up materials, tools, and equipment
• breaking down cranes and moving cranes
• small maintenance on cranes such as greasing: booms, winches, cables,
ball &blocks, load line cables
• cranes operated: from 8 ton carry deck to 350 ton truck crane
September 2013-November 2013
NCCCO Small & Large Mobile Hydraulic Crane Operator
Power Incorporated
Theodore, AL
• moving cranes to location of job
• setting up cranes, hoisting up materials, tools, and equipment
• breaking down cranes and moving cranes
• small maintenance on cranes such as greasing: booms, winches, cables,
ball &blocks, load line cables
• cranes operated: from 8 ton carry deck to 350 ton truck crane
July 2013-September 2013
Iron Worker, NCCCO Certified Crane Operator
KBR
Orange, TX
• used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges
rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed rigged skid pans and heavy tools
• cranes operated: from 50 ton rt to 130 ton rt
May 2013-June 2013
NCCCO Certified Crane Operator
CB&I
Westwego, LA
• relief operator

4. • set up and operated fifteen ton carry deck
• set up and operated fifteen ton broderson neck breaker
• set up and operated sixty ton crane
• performed daily inspections on cranes
• moved cranes to proper location
• scouted locations for set up of cranes
• helped perform preparation of crane pads for safe operation of cranes
• cranes operated: from 8 ton carry deck to 90 ton rt
May 2013-May 2013
NCCER Certified Rigger
GA West
Calvert, AL (shut down)
• lead rigger
• planning of critical and heavy lifts
• flagging cranes
• basic rigging
• moving and setting up of cranes
• breaking down and setting up of cranes
• swinging and stowing jibs and stingers
September 2012-May 2013
Bus Driver, 15 Ton Carry Deck Operator, Critical Lift,
Heavy lift, NCCER Certified Rigger
KBR(Chevron)
Pascagoula, MS
• lead rigger
• planning of critical and heavy lifts
• flagging cranes
• basic rigging
• moving and setting up of cranes
• breaking down and setting up of cranes
• swinging and stowing jibs and stingers
June 2012-September 2012
Heavy lift, Ironworker, NCCER Boilermaker,
NCCER Certified Rigger/Forklift,/Lull Operator
LPR Erectors (TK Stainless)
Calvert, AL

5. • used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges
• rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed rigged skid pans and heavy tools
January 2012- June 2012
Heavy lift, Ironworker, NCCER Boilermaker/NCCER Certified
Rigger,
Forklift, Lull Operator
Lenzing Fibers
Axis, AL
• used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges
• rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed rigged skid pans and heavy tools
December 2011-January 2012
Ironworker/NCCER Certified Rigger
Performance Contractors Inc (LNG Plant)
Pascagoula, MS
• rigged and installed pipe into pipe rack using chain falls, comealongs, and
rigging
July 2011-present
Millwright/roll builder, Overhead Crane Operator
Sms Millcraft
Axis, AL
• assemble and rebuild drive rolls, idler rolls, and foot rolls for bow
segments, molds, and benders for steel mill
• cranes operated: overhead crane 50 metric tons
February 2011-April 2011, reduction of force
NCCER Certified Rigger, NCCER Certified Boilermaker
Performance Contractors Inc (Chevron Pascagoula Plant)
Pascagoula, MS

6. • used hoists, lift trucks, hand tools, and power tools
• blinded valves from three quarters inch to thirty-six inch
• performed final bolt up and high torque on all valves and flanges
• rigged valves, flanges, pipes, and miscellaneous demo to be taken out
and installed
• rigged skid pans and heavy tools
August 2010-October 2010, reduction of force
NCCER Certified Rigger
HMIS(ThyssenKrupp Steel)
Mt. Vernon AL
• used hoists, lift trucks, hand tools, and power tools
• moved machinery and equipment using hoists, dollies, rollers, and trucks
• erected towers, hung cables, and set sheaves on top of towers
• rigged heavy tower sections and helped connect them using various types
of rigging
• rigged light to medium steel structures for connection
March 2010-August 2010, reduction of force
Boilermaker. Iron worker, NCCER Certified Rigger
Performance Contractors Inc(Chevron)
Irvington, AL
• helped hydro test piping
• performed hy torque flange duties using hy torque wrenches
• worked as a connector erecting pipe racks and filled in iron on top of an
existing structure. Most steel was erected using a crane, but at times had
to use bull rigging methods using chain falls, come-a-longs, beam clamps,
endless chokers, and rigging of that nature.
• used hoists, lift trucks, hand tools, and power tools
• rigged and installed large heavy pieces of pipe up to 54 inches in diameter
using bull rigging methods
• performed blinding and installation of pipes to tanks and vessels
• rigged and flew skid pans
March 2010-March 2010, seasonal work, reduction of
force
Iron worker, Millwright, Rigger, Structural Welder

7. Zachry Construction Corporation(International Paper)
San Antonio, TX
• performed basic iron working duties such as bolting up and connecting
iron of various sizes of steel
• used hoists, lift trucks, hand tools, and power tools
• constructed foundation for machines using hand tools, and building
materials such as cement and steel
• aligned machines and equipment using hoists, jacks, hand tools, squares,
rules, and plumb bobs
• assembled machines and bolted, welded, riveted, and other wise fastened
them to foundation and other structures
• lubricated machines and equipment
• installed new motors and pumps
• stick welded various types of braces and lifting luges
September 2009-January 2010, job completed, reduction of
force
Fabricator, Welder
Longs Roofing and Sheet Metal
El Dorado, AR
• read blue prints for fabrication of project
• fabricated various types of metal and steel
• fabbed tacked and welded out projects using stick and mig welding
• used various types of machinery for fabrication such as metal shear, press
break, hole puncher, etc
• drilled, tapped, and threaded bolt holes for fabrication
• used hoists, lift trucks, hand tools, and power tools in fabrication of jobs
May 2009-July 2009, seasonal work, reduction of force
Iron worker, Rigger
J. Christy Construction(Lion Oil)
El Dorado, AR
• performed basic duties of iron working such as bolting up and connecting
of steel on miscellaneous iron
• performed rigging on light to medium iron for pipe racks and structural
supports
March 2009-April 2009, seasonal work, reduction of force
Iron worker, Millwright, Rigger, Structural Welder

8. Zachry Construction Corporation(International Paper)
San Antonio, TX
• performed basic duties of iron working such as bolting up and connecting
of steel on existing and new iron
• performed rigging on light to heavy pieces of pipe to be set in pipe racks
• moved machinery and equipment using hoists, dollies, rollers, and trucks
• aligned machines and equipment using hoists, jacks, hand tools, squares,
rules, and plumb bobs
• lubricated machines and equipment
• changed out bearings on motors and pumps
• installed new motors and pumps
• used stick and mig to make quality welds on column splices, connection
clips(new and old), base plates, and other structural members
February 2009-March 2009, seasonal work, reduction of
force
Iron worker, Structural Welder
International Paper Co.(Zachry Construction Corporation)
Augusta, GA
• worked as a connector erecting fill in iron on top of existing structures and
replacing old steel with new steel
• performed basic duties of iron working such as bolting up and connecting
on miscellaneous iron
• used stick and mig to make quality structural welds on connection clips
and base plates
December 2008-February 2009, seasonal work, reduction of
force
Iron worker, Structural Fitter, Structural Welder
Zachry Construction Corporation(International Paper)
San Antonio, TX
• performed basic duties of iron working such as bolting up and connecting
on miscellaneous iron
• performed structural fits and welds on various connection clips, base
plates, x braces, and column splices

9. • fabricated, fit, and welded hand rails with stick
December 2007-February 2008, seasonal work, reduction of
force
Iron worker, Rigger
G.A. West & Co., Inc (Olin Chemical)
Chunchula, AL
• performed basic iron working duties such as bolting up and connecting of
steel
• performed basic rigging duties such as simple two point picks on i-beams
for connection
September 2008-December 2008, job completed, reduction
of
force
Iron worker, Millwright, Rigger, Structural Welder
Burke's Mechanical, Inc. (Louisiana Pacific)
Brent, AL
• worked as a connector erecting pipe racks, fill in iron on top of existing
structure. Most of it was erected by using a crane, but sometimes had to
use bull rigging methods such as chain falls, come-a-longs, etc.
• erected miscellaneous iron such as structured decks, pipe supports, x
braces, etc
• installed new motors and pumps
• assembled machines and bolted to the structures from which they were to
be placed
• moved machinery and equipment using hoists, dollies, rollers, and trucks
• performed small repairs and lubricated machines and equipment
• aligned machines and equipment using hoists, jacks, hand tools, squares,
rules, and plumb bobs
• used hoists, lift trucks, hand tools, and power tools
• welded with stick on various types of steel such as connection clips,
column splices, i-beams, base plates, hand rails of various sizes, and all
types of braces
March 2008- September 2008, job completed, reduction of
force
Iron worker, Rigger, Structural Welder
Louisiana Pacific( The Teaford Company)
Thomasville, AL

10. • worked as a connector and bolted up iron on and around heater and
precipitater
• performed basic rigging on the ground of red iron to be hung for heater
and precipitater
• used stick and mig to make quality welds on the iron that was hung
around heater and precipitater inside and out
• used stick and mig to make quality seal welds inside and outside on the
hoppers on a conveyor line
July 2007- September 2007 seasonal work, reduction of
force
Iron worker, Millwright, Rigger, Structural Welder
Alabama River Newsprint Company(Burke's Mechanical
Inc.)
Perdue Hill, AL
• worked as a connector erecting pipe racks, fill in iron on top of existing
structure. Most of it was erected by using a crane, but sometimes had to
use bull rigging methods such as chain falls, come-a-longs, etc.
• erected miscellaneous iron such as structured decks, pipe supports, x
braces, etc
• installed new motors and pumps
• assembled machines and bolted to the structures from which they were to
be placed
• moved machinery and equipment using hoists, dollies, rollers, and trucks
• performed small repairs and lubricated machines and equipment
• aligned machines and equipment using hoists, jacks, hand tools, squares,
rules, and plumb bobs
• used hoists, lift trucks, hand tools, and power tools
• welded with stick on various types of steel such as connection clips,
column splices, i-beams, base plates, hand rails of various sizes, and all
types of braces
May 2006-May 2007
Iron worker, Millwright, Rigger, Structural Welder
Mercedes-Benz Plant(Burke's Mechanical Inc.)
Vance, AL
• worked as a connector erecting pipe racks, fill in iron on top of existing
structure. Most of it was erected by using a crane, but sometimes had to
use bull rigging methods such as chain falls, come-a-longs, etc.

11. • erected miscellaneous iron such as structured decks, pipe supports, x
braces, etc
• installed new motors and pumps
• assembled machines and bolted to the structures from which they were to
be placed
• moved machinery and equipment using hoists, dollies, rollers, and trucks
• performed small repairs and lubricated machines and equipment
• aligned machines and equipment using hoists, jacks, hand tools, squares,
rules, and plumb bobs
• used hoists, lift trucks, hand tools, and power tools
• welded with stick on various types of steel such as connection clips,
column splices, i-beams, base plates, hand rails of various sizes, and all
types of braces
CRANES OPERATED:
8 ton broderson carrydeck
15 ton broderson carrydeck
15 ton broderson neckbreaker
30 ton grove rt
35 ton grove rt

12. 60 ton grove rt
65 ton tadano rt
80 ton grove rt
90 ton grove and link belt rt
100 ton three axle link belt rt
130 ton grove rt
150 ton grove rt
165 ton grove truck crane
275 ton grove truck crane
350 ton grove truck crane
LICENSE:
Aerial Lift Certified
Boom Truck Certified
Forklift Certified
Hy-Torque Certified
High Speed Grinder Certified
NCCER Certified Rigger
NCCER Certified Boilermaker
NCCCO Cerfified Crane Operator
Class A CDL
SECURITY:
Criminal Background Check-Current
OSHA-10 Card-Current
SAFETY COUNCIL-Current
TWIC-Current
DOT Physcial-Current