1. Billy A. Burk IV
▪ 3041 N 17th
AVE. ▪ Milton, FL 32583
▪ Phone: (850) 313-0551
▪ Email: drewburk1226@gmaill.com
KEY QUALIFICATIONS:
Knowledge of engineering practices
Well versed in quality assurance and control programs
Ability to work with and support other departments
Strong verbal and written communication skills
Administrative skills and ability to manage and supervise personnel
Capable of reading and understanding applicable manufacturer’s manuals, drawings, graphs and
blueprints
Knowledge of codes applicable to construction, inspection, and repair of refinery fixed equipment
Experience with piping, pressure vessels, tank and heat exchangers
SPECIFIC INSPECTION KNOWLEDGE:
Structural steel inspection
Welding inspection
Civil - Concrete and epoxy grout inspections
Tubbing Installation and Handling
Chemical Seal
Shaft Concrete Liner
Shaft Steel
Piping and Valve systems
HRS- Heat recovery system towers; including internal systems
FAT- Final absorbing towers; including internal systems
Expansion joints and duct work
Fire brick inspections
Converters; including internal systems
Hot heat interpass heat exchangers and Cold heat interpass heat exchangers; including internal
Drying towers; including internal systems
Sulfur burners; including internal systems
Plant Stacks
Mist eliminators
Acid pump tanks; including internal systems
CERTIFICATIONS AND SKILLS:
ASNT Level 2 NDT appointed in VT- Visual inspection and Visual test inspection
ASNT Level 2 NDT appointed in PT- Liquid Penetrant Testing and inspection
ASNT Level 2 NDT appointed in RT- Film Interpretation
Certified to operate, troubleshoot, repair and inspect sm5kw - sm80kw steam generators
Certified to operate, troubleshoot, repair and inspect multi-station digital thermostatic valves
Proficient in Microsoft Word and Microsoft Excel; Type 40 WPM
Extensively trained in safety with certificates
Chemical Seal Water Control Installation Specialist
2. Tubbing Installation
Probe Hole Survey and Data Logging
Oil Water Separator Plant Operator
H2S Alive: Cert # 2758269
Hilti Qualified Operator Cert # 5090933
Windsor Probe Operator: Civil Testing
JLG/High reach trained
First Aid
Safe Start
Avanti Chemical Grouting Certified
Authorization to Blast No.7236
EMPLOYMENT HISTORY:
BAB Mechanicals - Navarre, FL December 2008 – 2012
Position: Co-Owner/Sub-contractor
Burk Mechanicals have been contracted for an array of jobs including.
Consulting services
Quality Assurance/Quality Control services
Welding inspection services
Non-Destructive Testing services in methods PT/VT/RT/UT/MT
Structural steel inspection service
Electro Mechanical inspection services
Bonded piping inspection services
Fiberglass inspection services
Concrete inspection services
Steam generator inspections services
Multi-station digital and non-digital thermostatic valve inspection services
BAB Mechanicals - Navarre, FL May 2009 -2012
Position: QA/QC Manager/Co-Owner
I was able to implement a quality control program that insured all new construction was built to
meet code and manufactures/ client’s specifications.
Analyzed existing QA/QC practices and identified areas for improvement
Met with the construction team, management and contractors to align QA/QC requirements and
goals
Insured all welding procedures correct and met all requirements and code
Insured all concrete met requirements and codes
Insured all piping and all piping fit up met requirements and code
Insured all Electro Mechanical equipment meet requirements and code
Insured all acid area grouting met requirements and code
Insured all pumps and valves met requirements and code
Insured all structural steel were installed correctly, safely and in accordance with all requirements
and code
Insured all Non Destructive Testing in Radiographic Film interpretation met all requirements and
code
Insured all Non Destructive Testing in PT/Liquid penetrant test met all requirements and code
Insured all Non Destructive Testing in VT/Visual test inspection met all requirements and code
Insured all Non Destructive Testing in MT/Magnetic particle testing met all requirements and code
Insured all Non Destructive Testing in UT/Ultrasonic testing met all requirements and code
Insured contractors met all requirements and codes, to keep project on budget and on
time/schedule
3. Associated Mining Construction - Saskatchewan Canada June 2012 – August 2015
Position: QA/QC Supervisor
Observe current site QA/QC practices
Assist in assessment of existing QA/QC systems and organization and provide company with
recommendations to optimize QA/QC procedures that are in compliance with all engineering
documents, policies and specifications
Liaise with project supervision and management as well as with contractors and clients, to gather
information on QA/QC practices and requirements
Provide assistance in tracking all nonconformance issues and monitor remediation efforts
Insured contractors met all requirements and codes, to keep project on budget and on
time/schedule
Provide timely and meaningful reports to management with appropriate situation remediation
recommendations when nonconformance issues are discovered
Analyze construction plans to ensure that construction meets or exceeds QA/QC requirements
established by drawings, specifications and manufacturer requirements
I was able to implement a quality control program that insured all new construction was built to
meet code and manufactures/ client’s specifications.
Analyzed existing QA/QC practices and identified areas for improvement
Met with the construction team, management and contractors to align QA/QC requirements and
goals
Insured all welding procedures correct and met all requirements and code
Insured all concrete met requirements and codes
Tubbing installation and Inspection
Shaft liner installation and Inspection
Align and setup of shaft curb ring and forms
Bore Hole Survey and Data Logging
Oil Water Separator Plant Operator
Chemical Seal Preparation and installation
Managed Concrete Batch Plant Operations
Responsible for Client Turnover Packages
Insured all piping and all piping fit up met requirements and code
Insured all Non Destructive Testing in PT/Liquid Penetrant test met all requirements and code
Insured all Non Destructive Testing in VT/Visual test inspection met all requirements and code
Insured all Non Destructive Testing in MT/Magnetic particle testing met all requirements and code
Insured all Non Destructive Testing in UT/Ultrasonic testing met all requirements and code
Insured contractors met all requirements and codes, to keep project on budget and on
time/schedule
Associated Mining Construction – Saskatchewan, Canada September 2015 – Present
Position: Shaft Engineering Technician
Knowledge in Grout curtain programs
Survey Standpipe locations
Standpipe Installation and Water control grouting
Probe Hole Survey and Data Logging
Standpipe water flow testing
Shaft Barrel surveying for tights
Shaft Bench measurements and survey
Bench Mark up for drilling bench for blast
Load bench and sequence Drift Shot detonators
Tie in Drift Shots and Log all detonators
Program BCU and Engage Blast
Align and setup shaft curb ring and forms
Shaft Services installation and QA-QC
4. Steady Bracket Installation and alignment
Align level and survey shaft liner plates
Monitor shaft air ventilation systems
Shaft Concrete installation
Monitoring Concrete Pours Air / Temperature / Slump / Density
Back wall Grouting with Cementitious Grout
Back wall Grouting with Chemical Grout (AV-100 and AV-160)
Grouting and abandoning Margo Plugs
Grouting set up on surface and underground Cementitious Grout
Grouting set up on surface and underground for Chemical Grout
Shaft Grouting data logging and mapping
Testing and Mixing of Chemical Grout
Leveling Plate installation
Grouting Leveling Plate
Shaft Tubbing setup and installation
Monitored Installation of Rebar Hitch and Matting
Salt-set setup and installation
Align and survey Shaft Salt-sets
Tensioning of Salt-sets
EDUCATION:
Navarre High School- Navarre, FL Graduated: May 2008
Pensacola Junior College- Pensacola, FL August 2008 - May 2009
Studied: Information Technology & Mechanical Science
Pensacola State- Pensacola, FL August 2009 – March 2010
Studied: Administration
Harris University - Bradenton, FL Graduated: June 2012
Associate of Applied Science Degree - Business Administration