1.
Sheet’s 1 of 4
Curriculum Vitae – QA/QC Mechanical Inspector (Rotating Equipment)
(Plant & Equipment Inspector)
Full Name: Mohammed Ferdous Rahman
Phone No. : Saudi Arabia +966 571481140 Bangladesh +88 01716 854811
Email: ferdous7@icloud.com or ferdous.rahman@bonatti.it
Saudi Aramco: (SAP # 70009815)
A] Career Objective:
To be in association with a dynamic and Professional Company where in Quality, hard work and efficient work is
recognized to secure the career growth. To work hard and give the best from the utmost skill I possess and dedicate
myself to the company and its needs.
B] Capability:
An incisive result‐oriented professional having well command over execution of all types of works, analytical ability &
Problem solving skills and professional at all times. With over 15 years project experience, in Bangladesh and abroad at
Gulf under client of Saudi Aramco, YASREF and Sabic United etc.
C] Discipline: QA/QC Inspector (Mechanical /Plant & Equipment), QA/QC Inspector (P&E), NDT
Coordinator, Executive (Technical), NDT Engineer,
D] Summary : I have proven project team leadership skills, conversant with all facets of pressure equipment
Inspection techniques and methods. Strong knowledge of international Codes and Standards
Practices and processes. I have held such roles as Senior Plant Inspector/Senior Inspector/
QA/QC Inspector and NDT Coordinator in the Petrochemical and Refinery industries with a
construction back ground in Oil and Gas sector.
QA/QC role in the construction, erection, installations & alignment of various Rotating & Static
Equipment auxiliary equipment in petrochemical plant, Industrial Plant. QC inspection, surveillance
and review/ signed‐off ITR as per project specification, QCP/ITP that complies on international
Codes/Standards and practices. Constantly striving to improve Plant Reliability by identifying on‐
stream inspection Opportunities incorporating Visual, NDT & advanced Inspection technologies to
achieve this goal. The preparation of pressure equipment inspection scopes for planned turnarounds
and online inspection Opportunities. To coordinate, monitor, and maintain effective documentation
system throughout the project. Excellent knowledge with computer preparing documentation.
E] Bonatti S.p.A Branch:
Designation : QA/QC Mechanical Inspector (Static & Rotating Equipment)
Client : United Sabic Petrochemical Ltd.
Contractor : Linde (Sub Con. Bonatti Spa Saudi Arabia Branch)
Service Period : Jan’ 2015 to May’ 2015
Project : United C02 Utilization Project
Responsibility: Responsible for project material inspection including all vendor equipment’s; installation and
alignment of Mechanical equipments (Rotating & Static) i.e. Columns vessels, plate frame &
tube exchangers, Adsorber, dryer, CO Reactor, Water Separator, Wet Air compressor
package, Blower, pumps & CO2 Loading facilities. Rotating equipments Lube oil, & auxiliary
seal system, skid mounted equipment, etc inspection activities and progress in assembling of
parts and each component according to the Code, Standard and dealer/ vendor equipment
specification.
F] Bonatti S.p.A Arabia Branch:
Designation : QA/QC Inspector (Mechanical, Rotating Equipment)
Contractor : Bonatti Spa Saudi Arabia Branch
Service Period : May’ 2008 to Dec’ 2014
Projects : Optimize Production in Mubarraz Area.
Projects : Replace and Upgrade Six Electric Motors
Projects : Upgrade Abu Ali Plant Project.
Projects : Yanbu Export Refinery Project. (YASREF)
Responsibility:
Responsible for project material inspection including all vendor equipment’s; installation and
alignment of Mechanical equipments (Rotating & Static) i.e. vessels, exchangers, field erected tanks,
drums, air filter, Dosing package, Hydrocarbon and Nitrogen Package, De‐aerating System, Heaters,

2.
Sheet’s 2 of 4
water cooling system and rotating equipment i.e. Steam turbine boiler units, Drive motors, centrifugal
Pumps, i.e. injection, compressors, lube oil, & auxiliary seal system, Utility water and Instrument air
service, skid mounted equipment, etc inspection activities and progress in assembling of parts and
each component according to the Code, Standard and dealer/ vendor equipment specification.
Installation of equipment such as, WOSEP, Booster and Shipper Pumps, Motors, various Skids,
lube/seal oil unit injection Pumps, Valves, Air surge drums, Vertical & Horizontal Vessels, Compressors,
Through knowledge with international standards such as ASME IX, B31.1, B31.3, B31.4, AWS D1.1, API
1104, API 650, API 510, API 570, API 686, and ASTM Standard. Co‐ordination of inspection activities
relating to pressure equipment, process piping, and above ground, storage tanks. Under the client of
Saudi Aramco and SIEMENS. Surveillance pipeline and piping inspection at fabrication shop and site
such activities include pressure testing (hydro test and pneumatic leak testing)
G] Bonatti S.p.A Branch:
Designation : QA/QC Inspector (Mechanical /Plant & Equipment)
Client : Saudi Aramco
Contractor : Bonatti Spa Saudi Arabia Branch
Project : Mothballing for GOSP‐1, GOSP‐2, and GOSP‐6 (Additional Scope)
Responsibility: Monitor and conduct inspection on various Equipment Scheduled for Mohtballing.
Ensuring that all the required procedure of preservation was followed per equipment.
Coordinate with the Operation Personnel of SAUDI ARAMCO and PMT about the daily
activities of Mothballing. Review all MSDS of all preservation media arrived at site against
the P.O requirement. Prepare tracking list for all the Equipment Mothballed on daily basis
with all the inputs included like the gauge pressure of Nitrogen on vessels and exchanger
being preserves and submit to SAUDI ARAMCO for review and approval.
H] Dipon Gas Company Ltd:
Designation : QA/QC Inspector (Plant & Equipment)
Client : Chevron Bangladesh Ltd.
Contractor : Dipon Gas Company Ltd.
Project : Bibiyana Gas Development Project.
1 Jul 06 to April 08: I Have Assigned to Accomplish the Quality Control of Fabrication Work
at Gas Process Plant, Under the Company Chevron Bangladesh Ltd.
Responsibility:
Ensure the at site relating on project work, inspection, testing and documentation conforms to
requirements on the function of QC Inspector Monitoring the Tie‐In joints during shutdown and
valves & vessel service inspection as per the code requirement responsible for the control of all
inspection and test equipment. To coordinate, monitor and maintain efficient documentation
system throughout the project. Responsible for preparation, compilation and submission of
project final documentation to clients.
I] Bangladesh Foundry & Engineering Works Ltd:
Contractor : Bangladesh Foundry & Engineering Works Ltd (BFEW)
Project : Bibiyana Gas Development Project.
1 Aug. to Nov’ 05 : Gang way fabrication Rig pad Installation & wire house fabrication etc. Nov, 05 to Jun 06, NPS
30” & 6” Pipeline from Musai Valve Station to South Pad part B This Covers 21km. At total 42 km
Pipeline fabrication at 3 valve station Also 14 small river crossing & 2 highway roads cross.
J] Dipon Gas Co. Ltd:
Designation : QA/QC Inspector (Plant & Equipment)
Client : Unocal 76 Bangladesh Ltd.
Contractor : Dipon Gas Co. Ltd
Project : Moulvibazar Gas Process Plant. & MB‐4, Pipeline Project.
1 Jan, to May, 05 : I Have been the Quality Control of Fabrication work Gas Process Plant, Under the Company
Unocal 76 Bangladesh Ltd. (Chevron) ensures QA/QC activity for fabrication &
Installation at MB gas Plant
K] Daewoo Engineering & Construction Company Ltd:
Designation : NDT Coordinator
Client : Agip Gas Bv Ltd.
Class : Lloyds Register of Shipping
Contractor : Daewoo Engineering & Construction Company Ltd.

3.
Sheet’s 3 of 4
Project : Wafa Gas Process Plant
21
Dec’ 02 to Nov’ 04 : In wafa gas plant as a NDT Coordinator for until finish project and I have a
Earn good Mane & fame for my hard labor, sincerely and full dedication to the duties I am fully
enquiry with substantial knowledge of running an office and working site
L] Western Marine Services Ltd.:
Designation : Executive (Technical)
Duration : 15 December 2000 to 14 November, 2002
Scope of Work : During my service tenure in Western Marine Services Limited.
I was did the Non destructive test RT, UT, MT, PT of the respective unit’s Radiographic test of
crude oil Storage tank (Capacity 50000M
3
) at eastern Refinery in Chittagong, Bd. Under the
company shell Bangladesh Ltd.
Client : Eastern Refinery in Chittagong
Project : Crude oil Storage tank (Capacity 50000M
3
)
Client : Shell Bangladesh Ltd.
Project : Gas Process Plant at Chittagong. Ultrasonic Thickness/ Inspection of internal
surface corrosion of gas Process plant & pipeline.
Gas drilling point on rig at offshore. Inspection of internal surface corrosion of
gas pipeline & Drilling Equipment.
Client : Chaittagong Dry Dock Ltd.
Consultant : Lloyds Register of Shipping/ Germanisher Lloyd, Bureau Veritas, and
Indian Register of shipping
Project : NDT Inspection and Thickness gauging hall plate as per Class
Requirement
M] Zenith Test & Inspection Services Ltd.
Designation : Executive (Technical)
Duration : 7July 1999 to 14 November, 2001
Scope of Work : I was assigned to accomplish the Non destructive test RT, UT, Ultrasonic thickness gauging more
& more ship Vessel etc. at outer anchorage & dry dock yard enter satisfaction of caption of these
vessels and under the various Class requirement Lloyd’s register of shipping, Germanisher Lloyd,
Bureau Veritas, Indian Register of shipping, as and required by the competent authority.
Client: Shell Bangladesh Ltd.
Project Gas drilling point on rig at offshore Inspection of internal surface. Corrosion of gas pipeline
& Drilling Equipment.
Client : Chaittagong Dry Dock Ltd.
Lloyds Register of Shipping/ Germanisher Lloyd, Indian Register of shipping, NDT Inspection and
Thickness gauging Hall plate as per Class Requirement
N] Bangladesh Industrial X‐ray:
Designation : NDT Engineer
Duration : 1 March 1999 30th June, 1999 I carried out the NDT Inspection in various projects in Bangladesh
Client : Edmunt Nuttal Ltd.
Project : Bhairab‐Ashugonj Bridge Project UT, MT, & PT Inspection of inter. surface welding of casing Pipe
Client : Bangladesh Roads & highway Corporation Ltd.
Project : Habigonj Gas Pipeline project
Client : Siemens Company Ltd BD.
Project : 60MW combine power plant DC‐10 Air buses Inspection of internal extension rod of Air buses
Client : Zia international Airport Bangladesh.
O] The Bengal Electric Ltd. & China International Water & Electric Corporation Consortium
Designation : NDT Engineer
Project : Ghorshal 210MW Thermal power plant,
Client : Bangladesh Power Development Board
Duration : 5th May 1997 to 30th December 1998
Scope of Work : I have performed the examination of RT & carried out
The RT operation in various Projects in Bangladesh along with 210MW Thermal power plant
Ghorshal, Bd. I Have worked in the Rashidpur gas Field Ltd.

4. Sheet’s 4 of 4
P] Qualification: Education and Professional Courses and Certification:
 Dec, 1997 Diploma In Engineering (Mechanical)
Bangladesh Technical Education Board Dhaka.
 April 1994 Secondary School Certificate
Rajshahi Education Board Bangladesh.
Q] Professional Courses and Certification for Proficiency:
 Jul 2011 ‐Certificate of Non Destructive Testing
Ultrasonic Testing ASNT Level –II, Certificate No: FCE/UT/271/F/11
 Jul 2011 ‐Certificate of Non Destructive Testing
Radiographic Testing Level –II, Certificate No: FCE/RT/270/F/11
 Jul 2011 ‐Certificate of Non Destructive Testing
Magnetic Particle Testing Level –II, Certificate No: FCE/MPT/273/F/11
 Jul 2011 ‐Certificate of Non Destructive Testing
Dye Penetrant Testing Level II, Certificate No: FCE/PT/272/F/11
R] Others Qualification / Seminars attended:
I] Computer Literacy operating system
II] Microsoft word
III] Spread sheet analysis MS Excel
IV] Attend Workshop training in Bangladesh Railway workshop at Saidpur.
V] Attend a training positive Alloy Material Indicator (PAMI) in Libya.
VI] Attend a training Health Environment and Safety (HES) under the company Chevron.
VII] Attend training for Handling & Assembly of fiberglass reinforced thermosetting resin pipe (RTR)
VIII] Attend a training ISO 9001: 2008 Management quality system
S] During Service Experience in aboard:
 Gulf : Sabic United C02 Utilization Project
: Yanbu Export Refinery Project. (YASREF)
: Abu Ali Plant Project. Bonatti SpA Ltd. Under the Client of Saudi Aramco
: Motors Project. Bonatti SpA Ltd. Under the Client of Saudi Aramco
: Optimize Production in Mubarraz area. Bonatti SpA Ltd. Under the Client of Saudi Aramco
 Libya : Gas process plant at Sahara desert at Libya. For two years. Daewoo Engineering & C Co, Ltd.
Under The client Agip Gas Bv Ltd.
 India : Special 4th survey measurement of thickness gauging on Halda port At Kolkata in India
under the Indian Register of Shipping. At Kolkata in India under the Indian Register of Shipping.
 Myanmar : Special 4th survey measurement of thickness Gauging on Rangyun port in Maynmar under the
Class Germanisher Lloyd.
T] Reference : Professional references and academic credentials will be furnished upon require.
U] Personal Particular’s:
Nickname : Ferdous
Birth Date : 5 July 1978
Passport No. : A 0712829 (Expiry 6th
Jun’ 2015)
Profession : Mechanical Engineer
Occupation : QA/QC Mechanical Inspector (Rotating & Static)
Marital Status : Married
Native : Bangladesh
Home Address : House# 112/113, Islamiya High School Street, Block “Ta” Mirpur‐6,
Dhaka‐1216, Bangladesh.
M. Ferdous Rahman