Fallacy Summary And Application Essay

Fallacy Summary and Application Essay
Abstract
An argument is fallacious when it contains one or more logical fallacies. A logical fallacy is an argument that contains a mistake in reasoning (2002).
When using critical thinking to make decisions, an individual or group needs to be aware of logical fallacies and how they relate to decision–making.
Logical fallacies can be used to manipulate a situation and if a person or group does not recognize logical fallacies, the person or group can be
manipulated during the decision–making process. This paper will discuss three common logical fallacies and how they can be used in the
decision–making process between management and subordinates in a business setting.
... Show more content on Helpwriting.net ...
The Nizkor Project describes a hasty generalization as a fallacy that is committed when a person draws a conclusion about a population based on a
sample that is not large enough (www.nizkor.org). The managers that were involved in the discussion group stated that the entire staff should have their
Internet access removed because they were all misusing at time, or would at some point in the future. Because only a few individuals have actually
misused the company resource, it was hasty generalization by the managers to state that all of the employees have or would misuse the company's
Internet access.
The subordinates responded to the managers' use of the hasty generalization fallacy, with a fallacy of their own. The subordinates stated that if the
company removed a tool such as Internet access that is used to complete company business, what would the managers remove next. The phones, office
supplies, or possibly their computers? The subordinates stated that if their Internet access were removed, they would eventually be unable to do their
jobs. The subordinates to form their argument for not removing Internet access from the staff used the slippery slope fallacy. The logical fallacy
known as the slippery slope occurs when we claim, without sufficient evidence, that a seemingly harmless action, if taken, will lead to a disastrous
outcome (2002).
The managers having listened
... Get more on HelpWriting.net ...

Lab Report Discussion Essay
The purpose of this lab was to create an experiment to test samples of plastic–like cylinders, to see if the different masses had an effect on the density
of the objects. The original hypothesis was if the mass of the substance increased there would be no effect on its density.
As seen in the data analysis, the average density was 1.7 (g/mL), with only a negligible 0.1 (g/mL) difference across all four masses of the substance.
Furthermore in the data, if the mass of the substance increased, the volume increased proportionally with it. This information ultimately supports our
hypothesis. As addressed during classroom lectures, the relationship between the two variables is most likely explained by the fact that density is a
ratio. It would be logical to assume that while the mass and volume increase at the same rate, the division of mass by volume would result in nearly the
same number. ... Show more content on Helpwriting.net ...
However, while the accuracy of the calculated average density is unknown, it was very precise, given the negligible 0.1 (g/mL) inconsistency.
Possible sources of errors could result from inaccurate following of the procedure, or a lack of good time management. These would result in human
errors such as rushing and taking inaccurate measurements, both which would result in flawed raw data. This could be remedied by carefully
following each step in the procedure and slowing down movements to reduce measurement error. However, do not believe we had many flaws in the
execution of our

It240 Appendix F Essay
Associate Level Material
Appendix F
Vocabulary Table
Define five of the key terms listed in the Vocabulary Table.
|Term |Definition |
|Windows |Whichever of several microcomputer operating systems or environments presenting a|
| |graphical user interface |
|Processor |A piece of a computer, such as the central processing unit, that preforms |
| |calculations or other ... Show more content on Helpwriting.net ...
|
|Windows manager |is system software that controls the placement and appearance of windows within a|
| |windowing system in a graphical user interface. |
|Object manager |is a subsystem implemented as part of the Windows Executive which manages Windows|
| |resources |
|Device driver |In computing, a device driver or software driver is a computer program allowing |
| |higher–level computer programs to interact with a hardware device. |
|FAT |is a computerfile system architecture now widely used on many computer systems |
| |and most memory cards, such as those used with digital camera |
|FAT32 |In order to overcome

WK 1 DQ 1 Essay
Introduction
This paper intends to discuss the role of epistemology in research while defining knowledge as fact or fiction in society which constantly changes. The
writer intends to utilize various methods of acquiring knowledge in both the natural tangible and intangible world composition. The end result may
offer the reader a better understanding of the influences and formulation of a management research problem of knowledge itself.
Epistemology and Knowledge
What is knowledge? Easterby–Smith et al. (2012, p. 21) note that epistemology is inquiring via various methods regarding the composition of nature in
both physical and social worlds. Knowledge itself can be described on what insight is gained from the situation regardless if the ... Show more content
on Helpwriting.net ...
How we know what we know
How do we know what we know? The upbringing of an individual, experiences, communication, research, observation, feedback and awareness are all
particulars of how knowledge is gained and transferred. It is of note that every individual is unique therefore fact and fiction will be perceived in
various manners. Theories and philosophies often are taken into consideration when management research formulation or problems occur. Van Gich
(2002) compares the epistemology disciplines in science as modern physics versus social sciences. Both of these methods have evolved with our ever
changing society. Van Gich (2002, p. 201) mentions that Scientists believe knowledge should be considered 'objectively' without being persuaded by
any extenuating circumstances such as people or place whereas philosophers tend to argue that knowledge should be subjective to perception and
thought analysis. Easterby–Smith et al. (2012) note there has been a long standing tension in the conduction of management research. Should
management research lead to an epistemological stance? The writer believes that every situation is unique applying objective concepts in certain
circumstances and subjective concepts in others. Both concepts may be utilized in certain cases.
Conclusion
It is quite possible to gain knowledge from both tangible and intangible characteristics of our every changing society today. The variables depend on the
intended outcome. Epistemology in management

History Of Xerox's Quality Management Strategy Implemented...
In this argument I will exhibit information pertaining to the history of Xerox. The environmental issues which challenged the organization, and how
the organization overcame those issues. I will also argue that the quality management strategy implemented by Kearns the former CEO of Xerox is also
applicable to other organizations. Critical information will also be conveyed on the Xerox organization subsequent condition to the resignation of
Kearns. Augmenting further, an illustrative situation will also be explained where I was the recipient of a damaged product from a retail store of
which the story manager handled promptly. History and Environmental Challenges of Xerox of the 1960s Xerox, Inc. is an innovative printer
manufacturing... Show more content on Helpwriting.net ...
earned $ 1 billion in profits" (p.31). This is a candid illustration of an organization that was cognizant of a product that was demand by customers; and
thus subsequently, erected a product of quality that met the satisfaction of those customers. Henceforth, since the Xerox 914 was the first plain paper
copier with patented rights to the Xerox, Inc. the organization enjoyed great competitive advantage to other innovative organizations in its industry.
However, organizations have to be careful in implementing radical steps that will inhibit competitors from manufacturing products of similar quality.
Mulcaster (2009) states that, "firms that are considering expanding their market share through means of strategy implementation, product improvement,
and aggressive marketing in order increase sales and benefit from profits will be challenged by competitors to gain market share" (para. 1).
Consequently, other innovative competitors that occupied the same industry as Xerox, Inc. challenged the Xerox, Inc. for monopolizing the market.
Therefore, the Xerox, Inc. was faced with two critical challenges from the external environment; one of those challenges originating from its
competitors, and the other challenge in the form of government sanctions as it pertains to patented rights being extended for long periods. Noteworthy,
is the fact that during the 1970s competitive organizations such as IBM and

The Difference between Discs and Disks
Contents 1.Introduction 2 2.Background 2 3.Literature Review3 I.Medium3 II.Access Type3III.Storage Types44.The difference between a "Disk"
and a "Disc"5 5.Rotation Speed and Track Layout5 6.Current Usage5 7.Future Use6 8.Summary7 Introduction Technology changes so rapidly. It is
sometimes really hard to believe that the laptops, tablets, smartphones and touchpads that we use today are descendants of the supercomputer that
once used to occupy the whole room. During a press conference many years ago, Bill Gates offered his opinion that anything greater than 500MB
of hard drive memory would be pointlessly unnecessary. But as the time passed and the technology advanced bringing much more new valuable
stuff, there echoed a voice, more or less a chaos, "You have insufficient memory!". Memory management had many issues that different researchers
came across but above all is the memory size that fills up within no time and we are again in search of more memory to store our data which we
can't afford to lose. In the past days, computers used to store data in their Random Access Memory (RAM) that was surely not enough to store large
amount of data and was even volatile (temporary). This was the reason Disks were introduced and now are widely used in our daily life. Background
In 1928, Fritz Pfleumer developed the first magnetic tape recorder, which then

Logical Data Model
Part 2: Logical Data Model and its DBMS Products:
2.1 Logical Data Model:
A logical data model is a data model for a particular problem are presented related to a specific data management technology. Without being specific
to a particular DBMS product, it describes the data as much as details (Watt and Eng 2014). As we mentioned before, there is another type of DBMS
involved in the logical data model such as hierarchical data model and network data model, which will be discussed in the following.
2.2 Hierarchical data models and its products:
Hierarchical data model suggests that if the relationships between data in the database are established that one data item could be described as the
subordinate of another one. Products based on ... Show more content on Helpwriting.net ...
(Microsoft 2011).
2.3 Network data models and its products:
Network DBMS is a database that describes a flexible way of presentation in forms of objects and their relationships, which was created by Charles
Bachman and improved into standard form in 1961(Watt and Eng 2014).
The Frist product based on network data model is Raima Database Manager (RDM). RDM is an embedded database management system that can be
used in embedded systems. It was created by Raima Company in 1984 and it was one of the first microcomputer network model database management,
which is provided for C language applications (RAIMA 2017). The most recent functions involve database–mirroring use to support highly available
(HA) systems, database replication, multi–version concurrency with read–only transactions and etc. (RAIMA 2017). RDM Server includes the
following functional features. First, it is a kind of transaction file server that supports the processing and managing of database files on a given
medium (RAIMA 2017), which can also be considered as a database controller. Second, its database unions provide a consistent view of various
identically structured databases(RAIMA 2017), which providing a single appearance of the large database. This could increase the processing
capacity. Another feature could be introduced is encryption (RAIMA 2017). RDM requires all data to be encrypted before it is transferred through a
network and enter the database files, which ensure the security of the

Essay on Intel's Strategy for the 1990s
Case II–13: Intel Corporation В– Strategy for the 1990s Is Intel still a technology leader? How well do the three corporate macro strategies outlined
in the case serve to guide Intel through the 1990s? INTEL'S STRATEGY Intel's strategy in 1990 is to be the architectural leader in microprocessors, a
proprietary, high profit margin business. This implies an emphasis on design skills and the ability to implement design architectures. They also want to
continue as the leader in transistor density. This implies the continued importance of process technology skills associated with "line width reduction".
Intel wants to be a world class manufacturer. This is particularly important because their corporate strategy is to be the sole... Show more content on
Helpwriting.net ...
In his view, high volume semiconductor manufacturers learn more quickly than low volume producers. Part of this learning capability is due to the
close linkages they have with equipment vendors. The implication of Parker's view is that Intel is now a technology follower because of relatively
weak linkages with equipment supplier. To improve Intel's technology leadership, they must improve these linkages. Barrett believes that Intel is a
technology leader and that manufacturing improvements have accelerated since the exit from the DRAM business. He attributes this to improved
engineering techniques, not advances in process equipment. He agrees with Chou that high volume manufacturing is not critical to success. This view
is somewhat contradicted by selectively staying in the EPROM business В– a high volume, commodity business. Upon further examination, however,
his belief is that EPROMS are not critical because they provide advantages for learning, but because they provide a critical link between Intel and its
competitive environment. Staying in a commodity business allows Intel to learn how to lower unit costs and to use this knowledge across all of its
products. These three senior managers have different views of Intel's position and the changing nature of the industry. Parker's view suggests that a
volume product such as

Westminster Business Case Study
Westminster is a global health product manufacturer that was initially founded as a family enterprise in the year 1903 ("Current Issues in Method and
Practice", 2011). Over time its aggressive innovation and development of healthcare products have seen its current position as the world largest
healthcare products manufacturing company. A recognition of their unique company name and logo is evident globally. Its regional offices are situated
in the Pacific Rim, Europe, and America. These offices facilitate production and distribution in the overseas. Its domestic operations comprise of three
distinct companies that are owned wholly by Westminster and are concerned with the manufacture and distribution of unique lines of a commodity ...
Show more content on Helpwriting.net ...
The three companies sell in the latter category. This trend is expected to remain constant into a foreseeable future. A significant change is not
anticipated in the pattern. According to "Approximately 70% of domestic consumer sales volume is concentrated with 10% of Westminster 's
customers". However, a natural growth in the private–label non–prescription drugs and consumer health competitors may alter product sales
composition. Co–efficient private–label manufacturers lead to huge retail accounts greater profit margins and the will to produce private labelled
products ("THE WESTMINISTER PARLIAMENT AND NORTHERN IRELAND BUSINESS", 2013).
The successive study reveals that the senior management believes that the vast accounts affect the increment of commitment to enhanced supply chain
efficiency. The administration has indicated significant customer improvements through maintenance and increase in the sales volume the company
generates from the critical accounts. The company research suggests that formulation of a supply chain that involves collaboration with its large
customers is now a competitive necessity. In many situations, strong retailers demand the latter and at times can dictate relationship arrangement. The
company, therefore, has to ensure significant consideration to create unique supply chain, several powerful customers. It would be wise for
Westminster to establish leadership positions within

Case Study on вЂњSolar Feeder for Strategic Management
Q1. Identify the broad and specific problem of the company?
Answer:
The solar feeder is innovative tool, which is to avert squirrels from taking the birdseed by electronic shock. The solar feeder company is a distinctive
wind on the typical bird feeder, which is resembled a typical birdhouse, but it houses feed instead.
The main problem for the company had no long term road map like
пѓјwhich markets to compete
пѓјHow to compete (competitive Approaches)
пѓјHow to operate on a day to day basis (Meet organizational objectives) and no business model whether revenues and costs make viable business sense.
The most significant issue facing management is the lack of a business preparation and a logical tactic and objectives. They ... Show more content on
Helpwriting.net ...
Answer:
The suggestion for the company
1.Developing a strategic vision
2.Setting Objectives:
Feeder Company must set some target regarding Profits, revenue, margins. SDI 's will need to improve its accounting in order to accurately assess the
achievement of these goals. The high cost of SDI products was mainly due to its low production volume. There are investors with sufficient capital
interested in investing in SDI. There is no cash–flow statement, the income statement has no non–cash items like depreciation, and the balance sheet has
no entry for. To accomplish this, the company should conduct quality audit to its suppliers. Improve production execution and delivery SDI must
redesign the solar feeder so that it is easy to manufacture.
3.Crafting(Expertise) Strategy

X SDI does not have a good purchasing and quality control procedure to control quality of incoming raw materials. SDI needs additional outside
investors. The ABA members had grown 300% in the 1990s. The company was unable to sell its products to retailers at a lower price.
X SDI does not have a good purchasing and quality control procedure to control quality of incoming raw materials. SDI needs additional outside
investors. The ABA members had grown 300% in the 1990s. The company was unable to sell its products to retailers at a lower price.
4.Implementing and executing the strategy
5.Evaluate monitor and implement corrective adjustments

Advantages Of Enterprise Content Management And IBM CMOD
White Paper
Enterprise Content Management and IBM CMOD
July 2015
Table of Contents
Abstract1
1. Introduction to Enterprise Content management1
1.1 Why do we need ECM................................................................................................................1
2.ECM and IBM CMOD1
2.1 Features of IBM CMOD2
3.How CMOD works2
3.1 Different Objects of CMOD............................................................................................................3
3.2 Additional features of CMOD............................................................................................................5
4.Conclusion..5
5. References6
Abstract
1. What is Enterprise Content Management?
Enterprise Content Management is the strategies method and tools used to capture manage , store, preserve and deliver content and documents related to
... Show more content on Helpwriting.net ...
An OnDemand system has one library server and one or more object servers. An object server can operate on the same server or node as the library
server or on a different server or node than the library server.
OnDemand client programs operate on personal computers running on Windows. Using the client program, users can construct queries and search for
reports, retrieve documents from OnDemand, view, print, and fax copies or pages of documents, and attach electronic notes to pages of a document.

OnDemand servers manage control information and index data, store and retrieve documents and resource group files, and process query requests from
OnDemand client programs. The documents can reside on disk, optical, and tape storage volumes.
When a user submits a query, the client program sends a search request to the OnDemand library server. The library server returns a list of the
documents that match the query to the user. When the user selects a document for viewing, the client program retrieves a copy of the document from
the object server where the document is stored, opens a viewing window, and displays the document.
Report and

Information system has become as universal in our daily...
Information system has become as universal in our daily business activities as human resource management, marketing, finance or any other major
business functions. Information system play vital role to provide management with control over their data and to operate successful businesses. They
make up a significant field of study in business administration and management, and this is the most business imperatives that include in a course in
information system. If we want to understand information system and functions, first we need to be sure on the concepts of a system. A good
foundation of understanding is to give a clear definition: Information system is defined technically as a set of organized components which collect,
store distribute... Show more content on Helpwriting.net ...
MIS generate information to support day–to–day decision making that is needed to managers and business professionals. The role of the managers of
management information system (MIS) is to concentrate to the organization's information and technology systems. The MIS manage investigates
business problems then designs and maintains computer applications to have solutions to the organization's problems. A management information
system sometimes is called a management reporting system (MRS). MIS generates four basic types of reports that help managers:
1–Periodic scheduled reports
2–Exception reports
3–Demand reports and responses
4–Push reporting
Example1:
Example2:
3.A Decision support systems.
Decision support systems (DSS) refer to an interactive computer–based systems that are collected and presented data from the range of sources,
generally for business matters. (DSSs) are information systems designed to help and promote users reach a decision when a decision–making situation
arises.
Features:
Decision Support Systems use data from internal or external sources. Internal sources of data comprise sales, manufacturing, inventory, or financial
data from a companies' database. Data from external sources might include trends of population, interest rates, and costs of new housing construction
or price of new materials. Users of a DSS, often managers, can control data used in the DSS to help with decisions. Some decision

Using An Activity Base Costing ( Abc ) System
While all three costing method would work for a newly existing company in various areas, the actual costing method would be best for the first few
years. The reason for this rationale, is that the company is new to the business environment and it would take some time for managers to acclimate
their operations and production levels. As time passes, managers will have to change their strategy to the normal costing to avoid losing consumers to
its competitors. Firms' have to be able to reduce costs for their products and services, without losing the quality of the products (Apak, 2012).
Anderson & Dekker (2009) added that as the value of products and services increases, firms' find it difficult to manage complex areas of operations, ...
The ABC system can then apply the cost to modifying an original vehicle to the specifications of the customer. While an ABC system is beneficial for
most manufacturing firms, the system does have some advantages and disadvantages that managers should take into consideration (Blocher et al, 2013).
Advantages
Activity costs – the system is designed to monitor costs of each activity of a firm, for correlation with industry standards and ongoing activity costs and
cost reduction.
Better profitability – the system is designed to monitor consumer activities for overhead cost, to help managers understand which consumers are
costing the firm more in overhead and less in profits.
Process improvement – the system monitors distribution channels also, for overhead cost. In some cases, overhead cost from certain distributors are
not worth the overhead.
Improved planning – the system allows managers to determine whether or not it is best for the firm to produce a product or have another firm produce it.
Cost of unused capacity – the system helps managers to determine the where to reposition resources, depending upon the margin of various products at
various locations.
Disadvantages
Cost volume – the ABC system works best with a large number of cost activities and continually running a cost analysis to maintain each activity.
Therefore, for some small firms or firms with a few product lines will not benefit as well from the system.

Current Capability Set Fielding Field
Current capability set fielding along with future fielding 's including Bradley engineering change proposal (ECP), Armored Multi–Purpose Vehicle
(AMPV) Engineering, Manufacturing, and Development (EMD), and full rate production (FRP) radio variants are the Army 's answer to brigade
combat team modernization. The tactical environment is the tip of the spear, a challenging space where effectiveness, survivability, and sustainability
provide the keys to success. That success is becoming increasingly reliant on data. Data drives our missions, from operations, intelligence, and fires, to
other areas such as medical and logistics. Consumption of data is being fueled by the introduction of new communication systems. Warfighter
information tactical (WIN–T) has begun to bring this data down to the Brigade and Battalion level with the Point of Presence (POP), and the
Battalion and Company level with the Soldier Network Extension (SNE). New radio waveforms are providing conduits for data down to the tactical
edge. WIN–T and Handheld, Manpack, and Small Form Fit (HMS) radios are being integrated into Infantry Brigade Combat Team (IBCT) vehicle
platforms now. The Mid–Tier Networking Vehicular Radio (MNVR) is just around the corner in FY17. The tactical infrastructure is leveraging these
new communications capabilities to move data throughout all levels of the mission space. The Internet Protocol (IP) is the principal communications
protocol being used to move data throughout the Army 's

Emc Grabs Procedure
This script is provided as a means to collect system and/or software configuration for investigations by EMC.
To Install :
Extract the tar file into a suitable directory using following command,
command: tar –xvf emcgrab_<os>_<version>.tar
Please ensure that your filesystem has at least 500M free of disk space for temporary files that may be generated during its processing.
If running ECC 5.x the resulting tar file could be very large.
Please NOTE:
1. The script will prompt the user with a warning message should it detect less than 25M remaining on the file system every time the script runs the file
system check routine. Each time the user will have the option of continuing or aborting the script.
2. The script ... Show more content on Helpwriting.net ...
This is normal.
Host : HP–UX
If BCV and / or RDF2 devices are presented to the host and they are in a
'Not Ready' state, then ioscan may timeout.
Module Support :
Module : clariion (Clariion Storage)

Automatic Detection : AIX, SunOS, HP–UX and Linux
This requires Navisphere commands to be installed on the host platform.
The IP addresses will be automatically detected for any SP where devices are visible to the host. You can define additional IP addresses through the
use of the –clariionIP command line option
Module : dru (EMC Open Migrator/LM) (Optional)
Runs stormigrator commands, lists configured sessions and collects logs for last 14 days. No known issues.
Module : ecc (EMC Control Center) (Optional)
Predominately configured to collect ECC 5.x

Using Medical Record Systems And How Electronically Stored...
2.Describe 4 limitations to traditional (paper–based) medical record systems and discuss how electronically stored data can overcome each limitation.
Pg 50. a)Pragmatic and logistical issues: Can I find the data when I need them? Can I find the medical record in which they are recorded? Can I
find the data within the record? Can I find what I need quickly? Can I read and interpret the data once I find them? Can I update the data reliability
with new observations in a form consistent with the requirements for future access by me or other people? The patient's paper chart may be
unavailable when the health care professional needs it. It may be in use by someone else at another location; it may have been misplaced despite the...
When a chart is unavailable, the health care professional still must provide patient care. Thus, providers make do without past data, basing their
decisions instead on what the patient can tell them and on what their examination reveals. They then write a note for inclusion in the chart–when the
chart is located. In a large institution with thousands of medical records, it is not surprising that such loose notes often fail to make it to the patient's
chart or are filed out of sequence so that the actual chronology of management is disrupted in the record. When patients who have chronic or frequent
diseases are seen over months or years, their records grow so large that the charts must be broken up into multiple volumes. When a hospital clinic or
emergency room orders the patient's chart, only the most recent volume typically is provided. Old but pertinent data may be in early volumes that are
stored offsite or are otherwise unavailable. Alternatively, an early volume may be mistaken for the most recent volume, misleading its users and
resulting in documents being inserted out of sequence.pg 392 inaccessibility/unavailability. In contrast, many users, including patients, can read the
same electronic record at once. So it is never unavailable. With today's secure networks, clinicians and patients can access a patient's EHR from

Honda Bv Advantage
Tiny crossover SUVs are making a significant statement, delivering utility for a small cost. The Honda HR–V is one of a growing breed of subcompact
models, prized for its cabin offering a unique seat management system. Best Value Honda offers the HR–V in three trims with standard front–wheel
drive and available all–wheel drive. We chose the front–wheel drive HR–V EX with a starting price of $23,395 (including a $975 destination charge
and $800 for the automatic transmission) as our "best value" model. Consider all–wheel drive if you live where wintry conditions prevail, otherwise
hold back from making the $1,300 upgrade. Besides the EX trim, you'll find LX and EX–L Navi trims. The base model comes with such features as
17–inch alloy... Show more content on Helpwriting.net ...
With just the driver present, we found the engine sufficient, but with additional passengers onboard, it labors. Further, we discovered that even with the
CVT operating in manual mode and working with prearranged "gears" that wasn't enough. The HR–V supplies a surprisingly smooth ride despite its
size. Handling is hardly its strong suit, while its average 31 mpg rating is quite good – this means you can upgrade from your Fit without a tinge of
SUV guilt. Interior and Exterior Style–wise, the HR–V offers a tidy, if not quirky package. We like some of the individual parts, such as the grille and
profile, but put it all together and the exterior seems busy, even disjointed. That said, give Honda big marks for standard alloy wheels and the
tucked–in rear door handles. We're just not sure what Honda had in mind when tying various and discordant design elements together. Where the
exterior delivers a controversial design, the interior is comparatively tame. Happily, the two–screen arrangement still found in some Honda models is
absent. Even so, the base five–inch screen seems too small, even for this model. Touchscreen controls dominate and that means if you fiddle with the
audio volume your hands are on the screen and that may cause a distraction. Kudos to Honda for its Magic Seat management system. It isn't like any
other seating arrangement in this segment, making it possible to bring along gear that doesn't seem as if it

Marketing Plan For Penguin Wholesalers Essay
INTRODUCTION AND BACKGROUND Logistics is a process by which an item is moved from its point of creation or production to the point at
which it is used as planned by a company, a government or similar institutions. The items moved within a network could be Dangerous Goods,
foodstuffs, ammunition, electronics, building cranes and whole host of other products. Time and financial considerations are considered when making
these plans as are government regulations that guide the movement of items within a network. Penguin Wholesalers is a Whangarei based company
that was established in 1975.It has since morphed from an ice making company into a Transport and Warehousing enterprise that services the
northland region of New Zealand. And because its warehouse specialises primarily in the storage of foodstuffs, it is recognised as a Food Grade
Facility. With a diverse range of products stored inside it, from meats to butter to cooking spices, the warehouse is partitioned and temperature
controlled. Logistical warehouses usually start off with a small number of clients and as the business grows, changes are made to accommodate the
expansion. The Penguin Wholesalers warehouse has an operational set–up that works well when stock volumes are low but struggles to maintain
efficiency with high volume. This project has been chosen to standardise operations in a way that works efficiently regardless of the stock volumes as
it manages a resource constraint – space. RESEARCH QUESTION

Cornell Hospitality Report
Cornell Hospitality Report, a well–respected publication in the hotel industry wrote the following in a 2010 report; We wanted to explore the impact
of customer reviews on hotel bookings. To explore this question, we asked our respondents to rate their likelihood of choosing a hotel if they see either
a negative or a positive comment about the hotel within their category of interest. We found a surprisingly similar trend for all categories of hotels and
for both male and female respondents. In short, men and women are equally likely to stay away from a hotel with negative comments and equally
likely to choose a hotel if they see positive comments (McCarthy, 2010). There is a strong indication that hoteliers who want to be successful in the
new competitive landscape can disregard online reviews at their own peril. According to the paper, a 2010 study by Mckinsey and Co. claimed that
"word of mouth is the primary factor behind twenty to fifty percent of all purchasing decisions" and that "marketing–induced consumer–to–consumer
word of mouth generates more than twice the sales of paid advertising in categories as diverse as skincare and mobile phones." Considering the
previously presented evidence, I believe any hotel that plans to be successful should be actively engaged in managing online reviews. In addition to
this, they should focus strongly on top review websites such as TripAdvisor and Google to ensure they are involved in actively managing their online
reputation.
The

Strengths And Weaknesses Of Nettap
Introduction
Emind is one of the most trusted names in cloud infrastructure research and consultancy worldwide. Since the "dawn of Amazon cloud" we have been
helping businesses large and small establish secure and scalable IT operations on the public cloud. We integrate with many third party companies and
whenever possible, we conduct research and test these different platforms to understand how these can support our customers better.
In our latest testing we investigated NetApp's ONTAP data management platform. The storage solution aims to simplify storing and moving data within
an enterprise–grade cloud. Essentially, ONTAP takes NetApp's well known enterprise storage virtual array offering to the Amazon cloud to support
enterprise specific ... Show more content on Helpwriting.net ...
Using the Redis database gave us the opportunity to run the tests many times in close frequency.
1. Testing network failure: We cut the network and blocked all traffic to the primary storage instance while continuing to write to the Redis database
test instance. The ONTAP standby storage node quickly took over for the primary instance and we were notified that ourenvironment was not healthy.
The system remained functional for the duration of the test.
2. Testing instance failure – Next we stopped the primary storage instance. We got a warning notice that our action might result in a loss of ephemeral
data. The standby instance quickly stepped in and took over for the first one and no loss of service was experienced.
3. Testing failure communicating withthe Mediator – Next we blocked access to the mediator instance. The volumes were still available. ONTAP
notified us that the environment wasn't healthy and when we restored it back the Mediator the system continued as normal.
4. Testing Mediator failure – We then stopped the instance at the mediator. The volumes were still available. ONTAP notified us that the environment
wasn't healthy and when returning it back the Mediator the system continued as normal. There was no loss of

ACC 561 Final Exam
ACC 561 Final Exam
Copy this link to your browser and download
http://www.finalexamguide.com/ACC–561–Final–Exam–2–73.htm
1) According to the Financial Executives Institute, one function of controllership is _____.
2) Performance reports _____.
3) Budgets _____.
4) Ethical accountants are important to society because _____.
5) According to the Institute of Management Accountants' Statement of Ethical Professional
Practice, the standard of competence includes:
6) According to the Institute of Management Accountants' Statement of Ethical Professional Practice, the standard of objectivity includes _____.
7) Which scorecard function is associated with making non–routine decisions?
8) _____ is the field of ... Show more content on Helpwriting.net ...
20) Which of the following is not a cost driver of customer services costs?
21) Which value chain function would include the cost of computer–aided design equipment and cost to develop the prototype of a product?
22) Walnut Corporation sells desks at $480 per desk. The costs associated with each desk are as follows: Total fixed costs for the period are $456,840.

The contribution margin per desk is
23) Hug Me Company produces dolls. Each doll sells for $20.00. Variable costs per unit total $14.00, of which $6.25 is for direct materials and $5.25
is for direct labor. If total fixed costs are $435,000, then the break even volume in dollars is _____.
24) If the sales price per unit is $100, the unit variable cost is $75, and total fixed costs are $150,000, then the break even volume in dollar sales
rounded to the nearest whole dollar is _____.
25) _____ of approximating cost functions does not involve the analysis of past costs.
26) In relation to a cost function, the term reliability means_____.
27) The _____ method of measuring cost functions is the least reliable.
28) _____ is a name for a system that first accumulates overhead costs for each of the activities of an organization, and then assigns the costs of
activities to the products, services, or other cost objects that caused that activity.
29) The change from traditional costing to activity–based costing

Graduate Level Writing Analysis And Development Plan
Graduate–Level Writing Analysis and Development Plan
Communication in writing skills for the past six weeks were standards information on different sorts of sources for rapidly flowing needs of today's
writers. This form of writing shows the role of strategies in writing on subjects. It demonstrated contracts between oral communication and written
communication. The main ideas in this course discovery, objectives, critical thinking, and tension, valuing course resources time management, and
cooperating with others (Giordano 2012). However, the skills for effective writing produce volumes of master's level for the required resources in this
way.
Week One, Week Two, Week Four, and Fifth week Individual Assignments. The strengths I have is formulating an outline and word count, and using
the APA styles in composition. The organizational style of the introduction and conclusion were good with no deductions, which meets count
requirements that meets academic audience. It seems to organize and mostly likely to see. The paper provided words within a text and lead to greater
understanding and enjoyment of the reader. Yet, using more references would have fortified the credibility of my personal beliefs that had points
deducted. While the characteristics of graduate writing are clearly discussed, there are not specific other forms of writing listed for comparison,
weakening, the requirement details. According to Aas, the elements and plagiarism sections

Windows File System Lab Report
The purpose of this lab activity is to get one used to the basics of Windows file systems including RAID, Disk Spanning and Dynamic Disks. We also
worked on Linux machine to explore the processes of file system by working through LVM (Logical Volume Management).
We started by launching the Domain Controller server FluxWinDC01 instance and a new instance FluxWindowsFSLab with additional four Elastic
Block Store (EBS) drive storage. After remotely connecting to the Domain Controller, we access the AD DS by launching server manager and
clicking AD Users and Computers to add Williard Johnson as a Domain Admin user. We connect to the new windows instance, but as a new instance
one will "Get Windows Password" and change it after logging in as an ... Show more content on Helpwriting.net ...
To create a logical volume filesystem, we run "lvcreate –L 500M –n mylv0 VG0" to create 500MB volume size named mylv0. "ll /dev/mapper" is run
to list content of /dev/mapper. We run "mkdir /mnt/lvm" and "mkfs–t ext4 /dev/mapper/VG)–mylv0" to create a mount point for the volume and create
file system on it respectively. We run "mount–t ext4 /dev/mapper/VG0–mylv0 /mnt/lvm/ " to mount the device. Then, we test the file system by
accessing the system and creating a backup if the configuration folder.
We change the directory to ubuntu home directory to extend the logical volume and see its effect on content of the logical volume. "lvextend –L +16G
/dev/mapper/VG0–mylv0" is run to extend extend the volume to 16GB and we check the disk space running "df –h" but the volume is still listed as its
original size. "resize2fs /dev/mapper/VG0–mylv0" is run to fix this. We run vgdisplay to find that 8GB is left in the volume group.
To reduce file system, we run "umount /mnt/lvm" and use "fsck –f /dev/mapper/VG0–mylv0" to force a file system check. "resize2fs /dev/mapper
/VG0–mylv0 500M" is used to shrink the file system and "lvreduce –L 16G /dev/mapper/VG0–mylv0" is used to reduce the system to go back to
500MB. The file system is then remounted by running "mount –t ext4 /dev/mapper/VG0–mylv0 /mnt/lvm". "lvcreate –L 500M –s –n mysnap0 /dev
/mapper/VGO–mylv0" is run to take backup of the

Operating System Differences
UNIX/Linux, Mac, Microsoft Windows Operating System Differences University of Phoenix Abstract This paper will elaborate on the major
differences of the main Operating Systems (OS), which are UNIX/Linux, MacВ®, MicrosoftВ® WindowsВ®. The areas of discussion for this paper
will be on Memory Management, Process Management, File Management, and Security for each operating system. Operating Systems (OS) for a
computer is the main processing software program used to allow the computer processor to communicate with the software and hardware I/O devices.
Computers as SUN, SUSE use UNIX/Linux operating system, MacВ® (Macintosh) computer uses Apple operating system, and Personal Computers
(PC)... Show more content on Helpwriting.net ...
Mac is a personal computer usage environment not needing as much memory for operating system, but for the software execution and data storage.
Windows is also a personal computer environment with a server type environment growing in use. This memory management is both needing large
sections of memory for data and operating systems transferring. Along with the processor speed, memory management is one of the most important
parts of computer operation. The operating systems also rely on process management. Computers today have developed from running single program
capability and running run one program at a time to having the ability to run multiple programs at the same time. They are also able to use multiple
threads to provide more than one task to be run at the same time. Processes were created to help manage the execution of the programs. A process is
defined as a unit of work in a modern time–sharing system during the execution of a program. There are five states that a process may be in new,
running, waiting, ready, and terminated. Only one process can be running on a processor and the other processes are in a ready and waiting state.
Operating systems use processes to execute the system code, which executes and runs the main programs to process and operate the computer.
Operating systems may use the state of a process in different ways. A process

Aix Commands You Should Not Leave Home Without
AIX commands you should not leave home without Page 1 of 15 AIX commands you should not leave home without Level: Intermediate Shiv Dutta,
Senior Software Engineer, IBM 06 May 2003 Updated 24 Oct 2006 Do you ever feel you wish you could answer some of your own questions when
you work with AIXВ® and your System pв„ў server? Do you ever feel you could save time by not having to call on the support professionals all the
time? Well, wish no more. Shiv Dutta discusses some of the AIX commands that answer those questions and tells you how to enlarge the list of such
answers. Introduction As you know, AIXВ® has a vast array of commands that enable you to do a multitude of tasks. Depending on what you need to
accomplish, you use only a... Show more content on Helpwriting.net ...
What are the values of attributes for devices in my system? To list the current values of the attributes for the tape device, rmt0, type: lsattr–l rmt0 –E
To list the default values of the attributes for the tape device, rmt0, type: lsattr –l rmt0 –D To list the possible values of the login attribute for the TTY
device, tty0, type: lsattr –l tty0 –a login –R To display system level attributes, type: lsattr –E –l sys0 How many processors does my system have? http:/
/www.ibm.com/developerworks/aix/library/au–dutta_cmds.html 03/12/2007 AIX commands you should not leave home without Page 4 of 15 To
display the number of processors on your system, type: lscfg | grep proc How many hard disks does my system have and which ones are in use? To
display the number of hard disks on your system, type: lspv How do I list information about a specific physical volume? To find details about hdisk1,
for example, run the following command: lspv hdisk1 How do I get a detailed configuration of my system? Type the following: lscfg The following
options provide specific information: –p Displays platform–specific device information. The flag is applicable to AIX 4.2.1 or later.–v Displays the
VPD (Vital Product Database) found in the customized VPD object class. For example, to display details about the tape drive, rmt0, type: lscfg –vl
rmt0 You can obtain very similar information by running the prtconf command. How do I find out

Building Phase Of The Construction Phase
The database consolidation infrastructure build phase also referred to as the construction phase is a daunting phase where multiple factors will be
under consideration depending on the system requirements associated with the databases and supporting applications including storage, CPU, cache,
RAM and most importantly elastic scalability for future growth or database retirement. Furthermore, considerations of migrating to the Cloud at a
future date cannot be bypassed or overlooked. 1.8.1Addressing Risks in the Build Phase
Proactive risk management is crucial during this Phase because it represents the pinnacle of potential chaos in the project's life cycle. Managing risks
during this Phase begins with updating the status of risks while the infrastructure is being built, and ensuring that risk management plans are current.
To identify new risks, the task lists from the Envisioning and Planning phases must be reviewed to discover areas of high risk in the build phase. If
any item on these lists is unaccounted, it could present itself as a risk during this Phase. The following text must be reviewed to identify risks
associated with the operating system and the DB layers.
1.8.2The Operating System Layer
Issues related to the operating system layer will occur when a database is moved from a non–Oracle or a non–CDB environment into a CDB
environment.
1.8.3The DB Layer
The most significant risk is that of undetected data conversion errors associated with different versions of

What Is Lean Management And The Practical Concepts Within It
Introduction
The purpose of the assignment is to demonstrate an understanding of lean management and the practical concepts within it. Lean management is an
approach used to strategize development planning and improving targets, while delivering value to customers. Although company leaders may be
enthused and conversant frequently they lack the ability to empower people to respond effectively to customer needs and competitive threats.
Implementing a lean management system it shows how to support a company's transformation by linking strategic management to companywide
activities that furthers the corporate vision. Lean management is about operating the most efficient and effective organisation possible with least cost
and zero waste (Thomas L. Jackson, 1996). In order to analyse this in a more in depth this assignment will examine Subway's operational management.
Operation management is the activity of managing the resources which create and deliver the product and services.
1.About Subway Subway is one of the largest fast food restaurants in the world that mainly sells sandwiches and salads. It is one of the fastest
growing franchises with 44,447 outlets in 111 countries. Despite the difference in sizes and location of each individual store, Subway demonstrates to
have simple operations means customers can have the same sandwich and experience in the independent of geographical location. Subway's brand
target market is adults between the ages of 16 and 39.
Subway

Grace Hospital Case Study
Grace Hospital is a 450–bed acute care hospital. Maria Stevens, the Vice President of Nursing has made many strides in improving quality of care
and patient services over the last several years. She has improved the nursing service and has also improved the patient environment. Grace Hospital
is recognized as an excellent care facility. Maria Stevens has recently noted a decline in the physical plant. This included many aspects of the facility
including chipping paint and poor and neglected landscaping. She wishes to improve the physical facility and enlist the help of Bradley Walters, Vice
President of Marketing. Bradley Walters tells Maria Steven has for last several years attempted the same improvements but the CEO, Todd Davis has
refused, since there was no return on the investment and the hospital has a good financial position.
4. A list of what you think are the 10–15 most important facts/factors in the case. 1. Failing Physical Plant 2. Perception of the facility by patients,
families and visitors entering facility 3. The chipping paint make the facility look dirty 4, The last facility update was 15 yrs prior, therefore the
hospital looks outdated 5. "Old medicine is practiced behind old walls" (facility status as noted in #4) 6. The CEO, is unwilling to invest in the
facility 7. CEO is unwilling in past to respond from a marketing standpoint to the requests of the VP for marketing to

Cost Management : Cost Behavior
INTRODUCTION
The first part of the report will focus on the cost behavior and how this will benefit the company when it comes to profit making, as the company
managers do not clearly understand the relationship between business activities and the costs of those activities. It will then go on to discuss cost
function and how it can be derived for this company.
The last part of this report will focus into the company's profit and how it can be predicted in relation to the changes in volume, costs and prices. It will
look into the Cost Volume Profit analysis to do so in regards to the company selling multiple products. The report will conclude with the assumptions of
CVP analysis.
ISSUE 3A
Cost Behavior:
Cost behavior is the way in which different production costs are affected by the change in the level of production. Cost behavior categorizes costs
into three types; namely fixed costs, variable costs and semi variable. Fixed costs are those, which will not change with the level of activity but within
the relevant range. Fixed costs are going to be incurred even at zero production (e.g. rent expense). However, fixed costs per unit decrease with
increase in production (Wong 2014).
Variable costs are those that change with the level of productions i.e. the total variable cost increase when more units are produced and vice versa.
Semi–variable costs have properties of both fixed and variable costs due to presence of both variable and fixed components in them. An example of

Case Study : An It Service Business 's Attempt For Improve...
The case study in hand focuses on an IT service business's attempt to improve its business potential and decrease support costs per call by
incorporating six sigma DMAIC process. The process will aid the managers to identify key problems that are adversely affecting the company's
growth. Based on the data purchased from the clearinghouse, management team noticed that improving the process measures especially wait time in
call center could significantly increase new account growth. A champion was assigned to take responsibility for the new project and a team leader and
key team members were identified. Define: The goal and scope of the six sigma project is to increase the call center's industry–measured customer
satisfaction rating ... Show more content on Helpwriting.net ...
Analysis: In order to decide whether to reject or accept the hypothetical causes for higher support costs, the team used multi–vari charts to test. The
chart, call type is X and support costs is Y, revealed that problems and changes criteria looked more expensive to service. In the chart, where call
type and day of the week are X's and support costs is Y, showed Mondays and Friday standout as more costly. With these insights, the next step for
team was to discover lower factors which were really driving the Y. Fish bone tells the team that the driving factor of staff availability and why the
variation on Mondays and Fridays is so wide. Y–to–X tree highlighted that the team should view the staffing/call volume as a ratio. Cause–and–effect
matrix raises web–to–phone issue that was not measured initially. Having deeper understanding about what might be the driving factors for Y, the
team is going to use statistical tools to verify the critical X's. The charts where day of the week is X and call volume/staffing ratio is Y indicated that
Fridays and Mondays are understaffed. The ANOVA table showed that the influence of callbacks on a call's wait time is statistically significant.
Improve: The team identified staffing, web service percentage, transfers and callbacks as areas where improvement could be

Performance Of Data Processing Together On Relational...
In this proposed method, first we will be analyzing the performance of data processing individually on relational databases and Hadoop framework
by taking a collection of sample datasets. After evaluating the performance of each system, we will be working on a new method of data processing
by combinedly using both the computational powers of RDBMS and Hadoop frameworks. We will be using same experimental setup and
configurations for analyzing data.
The relational databases require a well–defined schema of the data being stored in the database. Relational databases use structured query language,
query operations can be performed on data stored in the database to extract the required information. SQL provides the user with commands like ...
But there are few significant differences comparing them."[7] This new model has no set of protocols clearly defined. With the development of these
type of new models, support for data analytics in RDBMS can be provided.
The traditional RDBMS can only process data which has well–defined structure. To process unstructured data using RDBMS, there should be a new
database design implemented and development of new query language with a set of defined protocols. There are many new database design methods
being proposed to increase the computational power in traditional RDBMS, which can be used for processing unstructured data.
The time taken for analyzing the dataset is calculated. This time can vary depending on the size of data. The larger the size, the time taken for
analyzing the data increases.
In Hadoop environment, data from various sources is first loaded and stored in the HDFS framework from the local file system. Map Reduce
provides supports distributed and parallel I/O scheduling, it is fault tolerant and supports scalability and has inbuilt processes for status and
monitoring of heterogeneous and large datasets as in Big Data. To fetch data from Hadoop File System, MapReduce program is used which is
written in Java. The MapReduce program is executed and run in the system. The MapReduce program can be written in many ways as required by the
programmer which is used for analyzing the data in different ways. The Mapper function can be run as

Disadvantages Of Storage Virtualization
STORAGE VIRTUALIZATION Storage virtualization is the process of grouping physical storage from multiple storage networks so it is unique.
Storage Virtualization is the process of presenting a logical view of the physical storage resources to the hosts. Cloud storage is the other name for
storage virtualization. It hides the internal working of the storage devices from the host application. The management and storage of data is easily
carried out using facilities like backing up data, archiving data and also recovering data in case of failure in less time. These facilities are made
possible by SAN (Storage area network) which is used to implement storage virtualization. San is a high speed sub network which consists of shared
storage devices. Storage virtualization allows to automatically expand and reduce the storage... Show more content on Helpwriting.net ...
This separation provides greater flexibility to manage the storage. The virtualization system provides the logical space for data storage and also maps
it to the actual physical location. There can be various layers of virtualization and mapping so the output of one layer can be passed on to the other
higher layers. Virtualization maps between front–end and back–end resources where the back–end refers to a logical unit number that is not presented
to the host system and the front–end refers to logical unit number that is presented to a host system. The actual form of mapping depends on the
implementation. In block based storage a single block of information is addressed using a LUN identifier and an offset which is known as logical block
addressing. The virtualization software maintains the mapping information of virtualized storage. The mapping information is called as metadata and
is stored in mapping table. Some implementations do not use mapping table instead they use algorithms to calculate the location for storage. Dynamic
methods can be used for this

Cost Volume Profit Analysis Essay
Cost volume profit analysis is a logical extension of marginal costing it is based on the principals of classifying the operating expenses into fixed &
variable. Now a day it has become a powerful instrument in the hands of powerful instrument in the hands of policy makers to maximize profits.
Earning of the maximum profit is the ultimate goal of almost all business undertakings. The most important factor influencing the earning of profit is
the level of production. CVP analysis examines the relationship of costs & profit to the volume of business to maximize profits there may be changes
in the level of production due to many reasons, such as competition, introduction of new products, trades depression or boom, increased demand for the
product, scare resources, change in the selling prices of products etc. in such cases management must study the effect on profit on a/c of the changing
levels of production a number of techniques can be used as an aid to management in this respect one such technique is the CVP.
OBJECTIVE OF STUDY
пЃ¶To identify the effect of breakeven point for multiple products and ascertain which product is as advantages.
пЃ¶To study the P/v ratio and Margin of safety of the company's all products.
пЃ¶Find out effect of changes in ... Show more content on Helpwriting.net ...
According to the, "Colin Drury CVP analysis is based on the relationship between volume and sales revenue, cost and profit in the short run the short
run normally being a period of one year, or less in which the output b of a firm is restricted to that available from the current operating capacity. The
Cost Volume Profit analysis is a management accounting tool to show the relationship between these ingredients of profit planning. The entire gamut
of profit planning is associated with CVP interrelationship. A widely used technique to study CVP relationship is break even analysis. It is concerned
with the study of revenues and costs in relation to sales total costs will be

Technology Innovation In Information Technology
Team AC4S brings Innovation to USCIS The (–– removed HTML ––) understands Information Technology (IT) infrastructures are becoming more
complex, virtualized, distributed, and diverse – in effect the data center has lost its walls – but organizations like USCIS need to innovate and exert the
same control over this virtualized, distributed world without walls as they would exert over prior models of IT. Our years of experience have taught us
Two areas of innovation the Team AC4S can lead USCIS into the future are the Software Defined Data Center and Cognitive Computing. Artificial
Intelligence (Cognitive Computing) in the Data Center The growing complexity of network infrastructures has increased the demand for intelligent...
Through collaboration with the USCIS key stakeholders and Industry, Team AC4S will work to an innovative approach to collecting event analytics
and rapid searching of event data in conjunction with other logs, performance metrics; providing insights into what events are most common and when,
to determine where efficiencies can be made in USCIS daily operations Our innovative approach to Enterprise Network Management will allow USCIS
to: Maximize Service Availability. Leverage hundreds of out
–of–the–box integrations, with included domain intelligent event reduction rules, to manage
the entire IT and Network infrastructure. Reduce Operational Costs. Consolidate NOCs, tools and management sources into a single pane–of–glass and
integrated management infrastructure. Improve Staff Productivity. Utilize normalization, de–duplication, aggregation, correlation capabilities, as well
as time, device, and service based event reductions. Seamless navigation based on common Graphical User Interface (GUI) architecture delivers
task–based workflows that represent common operations used to perform operations and service management actions. Minimize human intervention.
Exchange information between peer systems and automate maintenance actions and procedures. Increase Confidence. Leverage proven

Mechanical Ventilation
Mechanical ventilation, MV, is the most useful life–saving procedure used in the Intensive Care Unit. Despite the fact that Mechanical Ventilation has
numerous advantages , and many lives are saved by using variety techniques of MV, it has multiple complications. Adverse effects of MV rarely
related to ventilator itself. In most cases they are associated with potential adverse physiologic effects such as impairment of renal or hepatic function,
decreased cardiac output, gastric distension, increased intracranial pressure, and unintended respiratory alkalosis. Examples of equipment related
complications are failure of using humidifiers to properly heat the inspired gases, failure of ventilator to cycle, and failure of safety alarms to... Show
more content on Helpwriting.net ...
High Frequency Ventilation, HFV, with its small tidal volumes appears to be ideal for ventilation within the safety zone. Dr, Alison Froese,
pulmonologist, assumes that there is a window in the Pressure–Volume relation, the area between a lower zone of atelectasis and an upper zone of
overdistention. If possible, ideally, Tidal Volume should fit within this area. We can achieve that by setting PEEP level above the lower inflection point
and reducing Plateau Pressure to avoid over inflation. In diseased lung, the safe window may be too small to harbor conventional tidal volume. When
the patient is attached to HFOV, some aspects should be mentioned. Through careful observation we can detect early evidence of changing disease or
adverse effects. Auscultation during HFOV may be difficult, but very useful. For instance, reduced breath sounds can indicate pneumothorax or
endotracheal tube displacement when the tube is too low. Humidification and warming of inspiratory gases are necessary to prevent necrotizing
tracheobronchitis. In the article "High frequency oscillatory ventilation in children: an overview", the authors use data gained through systematic
professional literature review and current studies to provide the information about different modes of HFV, and to summarize the current knowledge
about advantages of HFV. It

Case Study : ' My Assigned Parts '
'My Assigned Parts' пѓ Introduction 3. Why does it need to be solved? The issue need to be solved as it's a peak hot summer where there is a much
greater need for such products i.e. Air conditioners, as it fulfil the basic need of customers to provide them comfort in hot weather circumstances.
Whereas, the unavailability of spare parts shows company's inadequate services for their customers and leads to a negative impact on company's
reputation and other potential losses. Providing better after sale services having standard maintenance is the key factor to attain customer satisfaction
and become prestigious company in the business market. 4. Key Issues There are several key issues: пѓ Attacking of insects on circuit boards.
пѓ Unavailability of spare parts. пѓ Intolerable and prolonged replacement of defective parts. пѓ Technician inaccessibility delay due to holidays. 5.
Research Scope In today 's fast paced environment, manufacturing flexibility is extensively recognized as a critical component to accomplish a
competitive advantage in the marketplace. Characterized by increasing product variety and short product life cycles and, it become apparent as a key
competing weapon. It reflects the ability of organizations to acknowledge the changes in their customers ' needs, as well as to unanticipated changes
develop from competitive pressures. [1] Problems mentioned in the case study will be resolved by frequent availability of spare parts, standard
maintenance,

Early Goal-Directed Resuscitation
Furthermore, prompt infusion of antimicrobial agents ought to be priority and this may require extra vascular access ports (Dellinger, et al., 2008).
Early goal–directed resuscitation has confirmed to improved survival for emergency department patients presenting with septic shock in a randomized,
controlled, single–center study. Resuscitation lessen 28–day death rate (Dellinger, et al., 2008). In a reviewed conducted by Dellinger, et al., (2012)
advocated administering one litre of crystalloid or 300–500ml of colloid more than 30 minutes, to accomplish a central venous pressure (CVP) of 8
mm Hg to 12 mm Hg. Volumes ought to be increased if there are huge indications of hypoperfusion (Dellinger, 2014).
My Second clinical priority intervention management for Mr L sepsis is the ... Show more content on Helpwriting.net ...
Therefore, Mr L was administered oxycodone 5 mg/paracetamol 1000 mg PRN. According to Hayes & Gordon (2015) pain relief and management is
very important for Mr L. Pain can prevent Mr L from performing activities of daily living, this can have serious effect on Mr L and this can cause
depression or anxiousness and the ability to for the patient to want to end his life (Hayes & Gordon 2015). GRN should focus their clinical
assessment based on body region to help determine the cause of Mr L pain. GRN should also do regular evaluation by using pain scale to effectively
monitor and to determine if there are any changes to Mr L. GRN need to review Mr L pain plan, and consult with a pain specialist about other options
that would promote relief without complicating the current medication therapy prescribed for Mr L. Because

The Credibility Of Action Research In A Short Film
The majority of research was conducted through productive interviews. With limited worthwhile information existing online, the internet proved to be
unreliable and an insufficient source of information, due to information being brief in most articles and only basic information existing. As interviews
proved to have greater credibility, useful and reliable information, a majority of key findings were derived from interview sources. As a means of
ensuring the credibility of research action research was conducted through the making of a short documentary which gave support to unequivocal
findings made during interviews. During the production of the film information which seemed untrustworthy or unrealistic was detected through the
action research, ... Show more content on Helpwriting.net ...
With additional research the film could have been to the standard of a professional filmmaker and the final film could have been finalised at a much
higher quality. As the research focused on production of a short film, the outcome format is ideal for aspiring filmmakers, due to the structure of the
film following that of a short film. The film gives brief and precise overviews of major topics which are most important in the production of a short
film. Each scene is brief and gives insight into each stage of the filmmaking process and the processes involved. To ensure the establishment of the
film's messages, each finding is placed into an individual scene with concise and precise information. Through the use of action research the credibility
of the film is made apparent, with obvious knowledge of filmmaking being presented. The key findings were made apparent through the use of red text
which indicated to the audience of the key finding. Key findings were limited in the duration of their presentation. This resulted in each key finding
only consisting of a single scene in which the finding is concisely explained. Variations in findings resulted in some scenes being shortened due to
amount of information. Although key findings with less supportive evidence was emphasised to assert importance. Weaker key findings

Advantages And Disadvantages Of ERP In The Erp Cloud
ADVANTAGES AND CHALLENGES IN HAVING THEIR ERP IN THE CLOUD erp cloud The general topic in IT today wheels is ERP in the
cloud. Proof of this is that although many companies have already migrated in recent years, the hosting of ERP in the cloud is one of the major trends
in IT in 2016, according to research conducted by PortalERP. For companies that are at the stage of mapping the pros and cons– or rather, the
advantages and challenges of migrating the ERP to the cloud – we have prepared this article summarizes the main topics from the perspective of the
experts I: Vantanges having ERP cloud Resource Scale: When ERP is hosted in the cloud, hiring resources is no longer a problem, because the server
may have its capacity increased quickly, without the usual limitations that exist when the ERP is in the data center... Show more content on
Helpwriting.net ...
As the company has internal know–how to do, we must consider that the project requires an extra effort to be hardly embedded in the schedule of the
existing staff. The company then has the challenge of hiring more people or outsource it. This choice is vital, as a cloud project must follow certain
procedures to be foolproof. A poorly executed project, which does not take into account all the elements involved, can bring tremendous headaches.
environmental management: no different from the migration project, the environmental management extra effort demands that often do not fit the
current team, because the professional did maintaining a physical server is not the same that it is prepared to manage an environment cloud. Normally,
the same team that ran the project is responsible for the management, whether internal and external. In addition to managing the server environment,
the management of the cloud environment involves safety concerns, contingency, connectivity, and others that require deep knowledge of the

Fallacy Summary And Application Essay

Recommended

Recommended

More Related Content

Similar to Fallacy Summary And Application Essay

Similar to Fallacy Summary And Application Essay (9)

More from Toni Christensen

More from Toni Christensen (20)

Recently uploaded

Recently uploaded (20)

Fallacy Summary And Application Essay