This document provides an overview and instructions for the ZQ500 Series mobile printers. It includes details on the printers' technology such as their smart battery, direct thermal printing, thermal shutdown protection, and support for QR codes, Bluetooth, NFC, and iPhone/iPad. The document reviews the printers' accessories, maintenance, troubleshooting, specifications, and programming languages. It contains setup instructions for loading media, connecting the printers, and setting up the software, as well as guidelines for battery safety, charging, and extending battery life.
Keras is a high level framework that runs on top of AI library such as Tensorflow, Theano, or CNTK. The key feature of Keras is that it allow to switch out the underlying library without performing any code changes. Keras contains commonly used neural-network building blocks such as layers, optimizer, activation functions etc and keras has support for convolutional and recurrent neural networks. In addition keras contains datasets and some pre-trained deep learnig applications that make it easier to learn for beginners. Essentially Keras is democrasting deep learning by reducing barrier into deep learning.
Keras is a high level framework that runs on top of AI library such as Tensorflow, Theano, or CNTK. The key feature of Keras is that it allow to switch out the underlying library without performing any code changes. Keras contains commonly used neural-network building blocks such as layers, optimizer, activation functions etc and keras has support for convolutional and recurrent neural networks. In addition keras contains datasets and some pre-trained deep learnig applications that make it easier to learn for beginners. Essentially Keras is democrasting deep learning by reducing barrier into deep learning.
Suggestions:
1) For best quality, download the PDF before viewing.
2) Open at least two windows: One for the Youtube video, one for the screencast (link below), and optionally one for the slides themselves.
3) The Youtube video is shown on the first page of the slide deck, for slides, just skip to page 2.
Screencast: http://youtu.be/VoL7JKJmr2I
Video recording: http://youtu.be/CJRvb8zxRdE (Thanks to Al Friedrich!)
In this talk, we take Deep Learning to task with real world data puzzles to solve.
Data:
- Higgs binary classification dataset (10M rows, 29 cols)
- MNIST 10-class dataset
- Weather categorical dataset
- eBay text classification dataset (8500 cols, 500k rows, 467 classes)
- ECG heartbeat anomaly detection
- Powered by the open source machine learning software H2O.ai. Contributors welcome at: https://github.com/h2oai
- To view videos on H2O open source machine learning software, go to: https://www.youtube.com/user/0xdata
Applying your Convolutional Neural NetworksDatabricks
Part 3 of the Deep Learning Fundamentals Series, this session starts with a quick primer on activation functions, learning rates, optimizers, and backpropagation. Then it dives deeper into convolutional neural networks discussing convolutions (including kernels, local connectivity, strides, padding, and activation functions), pooling (or subsampling to reduce the image size), and fully connected layer. The session also provides a high-level overview of some CNN architectures. The demos included in these slides are running on Keras with TensorFlow backend on Databricks.
Introduction to Adaptive Resonance Theory (ART) neural networks including:
Introduction (Stability-Plasticity Dilemma)
ART Network
ART Types
Basic ART network Architecture
ART Algorithm and Learning
ART Computational Example
ART Application
Conclusion
Main References
https://telecombcn-dl.github.io/dlai-2019/
Deep learning technologies are at the core of the current revolution in artificial intelligence for multimedia data analysis. The convergence of large-scale annotated datasets and affordable GPU hardware has allowed the training of neural networks for data analysis tasks which were previously addressed with hand-crafted features. Architectures such as convolutional neural networks, recurrent neural networks or Q-nets for reinforcement learning have shaped a brand new scenario in signal processing. This course will cover the basic principles of deep learning from both an algorithmic and computational perspectives.
MIRZO ULUG‘BEK NOMIDAGI O‘ZBEKISTON MILLIY UNIVERSITETI JIZZAX FILIALI.,
“AXBOROT TIZIMLARI VA TEXNOLOGIYALARI” KAFEDRASI., SUN’IY INTELLEKT.
s.b.ergashev@gmail.com
S.B. Ergashev
A brief introduction of Artificial neural network by exampleMrinmoy Majumder
A simple introduction with a solved example about artificial neural networks.Beginners can use this tutorial to gain a basic understanding about the ANN architecture and the process by which ANN model is developed for practical problem solving.The example in the tutorial describe the way ANN models are developed.ANN is widely popular and used in various artificial intelligence and internet of things projects.
Overview on Optimization algorithms in Deep LearningKhang Pham
Overview on function optimization in general and in deep learning. The slides cover from basic algorithms like batch gradient descent, stochastic gradient descent to the state of art algorithm like Momentum, Adagrad, RMSprop, Adam.
Object classification using CNN & VGG16 Model (Keras and Tensorflow) Lalit Jain
Using CNN with Keras and Tensorflow, we have a deployed a solution which can train any image on the fly. Code uses Google Api to fetch new images, VGG16 model to train the model and is deployed using Python Django framework
Suggestions:
1) For best quality, download the PDF before viewing.
2) Open at least two windows: One for the Youtube video, one for the screencast (link below), and optionally one for the slides themselves.
3) The Youtube video is shown on the first page of the slide deck, for slides, just skip to page 2.
Screencast: http://youtu.be/VoL7JKJmr2I
Video recording: http://youtu.be/CJRvb8zxRdE (Thanks to Al Friedrich!)
In this talk, we take Deep Learning to task with real world data puzzles to solve.
Data:
- Higgs binary classification dataset (10M rows, 29 cols)
- MNIST 10-class dataset
- Weather categorical dataset
- eBay text classification dataset (8500 cols, 500k rows, 467 classes)
- ECG heartbeat anomaly detection
- Powered by the open source machine learning software H2O.ai. Contributors welcome at: https://github.com/h2oai
- To view videos on H2O open source machine learning software, go to: https://www.youtube.com/user/0xdata
Applying your Convolutional Neural NetworksDatabricks
Part 3 of the Deep Learning Fundamentals Series, this session starts with a quick primer on activation functions, learning rates, optimizers, and backpropagation. Then it dives deeper into convolutional neural networks discussing convolutions (including kernels, local connectivity, strides, padding, and activation functions), pooling (or subsampling to reduce the image size), and fully connected layer. The session also provides a high-level overview of some CNN architectures. The demos included in these slides are running on Keras with TensorFlow backend on Databricks.
Introduction to Adaptive Resonance Theory (ART) neural networks including:
Introduction (Stability-Plasticity Dilemma)
ART Network
ART Types
Basic ART network Architecture
ART Algorithm and Learning
ART Computational Example
ART Application
Conclusion
Main References
https://telecombcn-dl.github.io/dlai-2019/
Deep learning technologies are at the core of the current revolution in artificial intelligence for multimedia data analysis. The convergence of large-scale annotated datasets and affordable GPU hardware has allowed the training of neural networks for data analysis tasks which were previously addressed with hand-crafted features. Architectures such as convolutional neural networks, recurrent neural networks or Q-nets for reinforcement learning have shaped a brand new scenario in signal processing. This course will cover the basic principles of deep learning from both an algorithmic and computational perspectives.
MIRZO ULUG‘BEK NOMIDAGI O‘ZBEKISTON MILLIY UNIVERSITETI JIZZAX FILIALI.,
“AXBOROT TIZIMLARI VA TEXNOLOGIYALARI” KAFEDRASI., SUN’IY INTELLEKT.
s.b.ergashev@gmail.com
S.B. Ergashev
A brief introduction of Artificial neural network by exampleMrinmoy Majumder
A simple introduction with a solved example about artificial neural networks.Beginners can use this tutorial to gain a basic understanding about the ANN architecture and the process by which ANN model is developed for practical problem solving.The example in the tutorial describe the way ANN models are developed.ANN is widely popular and used in various artificial intelligence and internet of things projects.
Overview on Optimization algorithms in Deep LearningKhang Pham
Overview on function optimization in general and in deep learning. The slides cover from basic algorithms like batch gradient descent, stochastic gradient descent to the state of art algorithm like Momentum, Adagrad, RMSprop, Adam.
Object classification using CNN & VGG16 Model (Keras and Tensorflow) Lalit Jain
Using CNN with Keras and Tensorflow, we have a deployed a solution which can train any image on the fly. Code uses Google Api to fetch new images, VGG16 model to train the model and is deployed using Python Django framework
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
2. 2
ZQ500 Series User Guide
Table of Contents
Proprietary Statements..............................................5
Document Conventions..............................................7
Introduction to the ZQ500™ Series Printer..............8
ZQ500 Series Technology...........................................9
Smart Battery.....................................................................................9
Printing Technology.........................................................................10
Direct Thermal..................................................................................10
Thermal Shutdown...........................................................................11
QR Code.............................................................................................11
Made for iPhone (MFi).....................................................................11
Near Field Communication (NFC)..................................................11
ZQ500 Seires Overview.............................................12
Getting Ready to Print..............................................14
Installing the Battery.......................................................................14
Battery Safety...................................................................................15
Charger Safety..................................................................................15
Charging Status Indicators................................................................................16
Battery Health Indicator.....................................................................................16
SC2 Dimensions..................................................................................................17
Model UCLI72-4 Quad Charger (AC18177-5)................................17
AC Power Adapter (included in kit p/n P1031365-024 for all
ZQ510 Printers).................................................................................19
Vehicle Cradle (P1063406-029) & 4-Bay Power Station (P1063406-027)......20
Loading Media Procedure..................................................................................22
Printer Status Icons.........................................................................24
Buttons..............................................................................................25
Power Up Sequences..........................................................................................25
Run Time Sequences without LED Flashes.......................................................26
LED’s..................................................................................................26
Alerts..................................................................................................26
Power Save Mode............................................................................27
Sleep Mode.......................................................................................27
Segmentation Mode.......................................................................28
Draft Mode.......................................................................................28
3. 3
ZQ500 Series User Guide
Verify Printer is Working.................................................................28
Printing a Configuration Label...........................................................................29
Connecting the Printer....................................................................29
Cable Communication........................................................................................30
Wireless Communications with Bluetooth..................................31
Bluetooth Networking Overview...................................................31
WLAN Overview...............................................................................34
Setting Up the Software.................................................................35
Near Field Communication (NFC).................................................35
ZQ500 Series Accessories...............................................................37
Belt Clip...............................................................................................................37
Hand Strap...........................................................................................................37
Shoulder Strap....................................................................................................38
Soft Case.............................................................................................................38
Exoskeleton.........................................................................................................39
Mag Card Reader.................................................................................................40
Preventive Maintenance..................................................................41
Extending Battery Life........................................................................................41
General Cleaning Instructions............................................................................41
Troubleshooting........................................................44
Front Control Panel..........................................................................44
Printer Status Indicators.................................................................44
Troubleshooting Topics...................................................................45
Troubleshooting Tests.....................................................................47
Printing a Configuration Label...........................................................................47
Communications Diagnostics............................................................................47
Specifications............................................................52
Printing Specifications........................................................................................52
Memory and Communications Specifications..................................................52
Label Specifications............................................................................................53
CPCL Font and Bar Code Specifications and
Commands................................................................54
ZPL Font and Bar Code Specifications and
Commands................................................................55
Communication Port.......................................................................56
USB......................................................................................................................56
Physical, Environmental and Electrical Specifications..............56
4. 4
ZQ500 Series User Guide
ZQ500 Series Accessories..............................................................59
Appendix A
USB Cables.......................................................................................60
Appendix B
Alert Messages.................................................................................61
Appendix C
Media Supplies.................................................................................62
Appendix D
Maintenance Supplies.....................................................................62
Appendix E
Serial Number and PCC Number Locations.................................63
Appendix F
Battery Disposal...............................................................................64
Product Disposal..............................................................................64
Appendix G
Using Zebra.com..............................................................................65
Appendix H...............................................................67
Product Support...............................................................................67
Index...................................................................................................68
7. 7
ZQ500 Series User Guide
Document Conventions
The following conventions are used throughout this docu-
ment to convey certain information:
Cautions, Important, and Note
Caution • Warns you of the potential for electrostatic discharge.
Caution • Warns you of a potential electric shock situation.
Caution • Warns you of a situation where excessive heat could cause
a burn
Caution • Advises you that failure to take or avoid a specific action
could result in physical harm to you.
Caution • Advises you that failure to take or avoid a specific action
could result in physical harm to the hardware.
Important • Advises you of information that is essential to complete a
task.
Note • Indicates neutral or positive information that emphasizes or
supplements important points of the main text.
8. 8
ZQ500 Series User Guide
Introduction to the ZQ500™ Series Printer
Thank you for choosing our Zebra®
ZQ500™ Series Mobile
Printer. You will find this rugged printer will become a produc-
tive and efficient addition to your workplace thanks to its inno-
vative design and state of the art features. Zebra Technologies
is the leader in industrial printers with world-class support for
all of your bar code printers, software, and supplies.
This user’s guide gives you the information you will need
to operate the ZQ510 and ZQ520 printers. These print-
ers use some of the latest technologies such as Near Field
Communication (NFC) and Made for iPhone®
(MFi). MFi print-
ers provide Apple co-processor (MFi) support which allows an
Apple device such as an iPhone or iPad®
to authenticate and
connect over Bluetooth®
.
These printers use CPCL and ZPL programming languages.
To create and print labels using the CPCL and ZPL languag-
es, refer to the Programming Guide for CPCL and ZPL (p/n
P1012728-008). See Appendix G for instructions on how to ac-
cess manuals on zebra.com.
ZQ500 Series Software Utilities:
•Zebra Net Bridge™ : printer configuration, fleet manage-
ment
•Zebra Setup Utility: single printer configuration, quick set-
up
•Zebra Designer Pro: label design
•Zebra Designer Drivers: Windows®
driver
•OPOS Driver: Windows driver
•Multiplatform SDK
(These utilities can be found on the Zebra website at
http://www.zebra.com/us/en/support-downloads.html.
See Appendix G.)
9. 9
ZQ500 Series User Guide
Unpacking and Inspection
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in the
Getting Ready to Print section) and inspect the media com-
partment for damage.
In case shipping is required, save the carton and all packing ma-
terial.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the shipping
company. Zebra Technologies Corporation is not responsi-
ble for any damage incurred during shipment of the printer
and will not cover the repair of this damage under its warran-
ty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.
ZQ500 Series Technology
The ZQ500 Series printers use several technologies made pop-
ular in other Zebra Mobile Printer product lines.
Smart Battery
The ZQ500 Series battery pack is a high capacity, smart Lithium
Ion battery that contains electronics which allow the printer to
monitor its operating parameters. Among these are the number
of charge cycles it has undergone and its date of manufacture.
Using these parameters, the printer’s software can monitor the
battery’s condition and alert the user when to recharge or remove
the battery from service.
Operating Temperature Charging Temperature Storage Temperature
-200
C to +550
C
(-4o
F to 131o
F)
00
C to +400
C
(32o
F to 104o
F)
-250
C to +650
C
(-13o
F to 149o
F)
The ZQ510 and ZQ520 printers will only function properly with genuine
Zebra smart battery packs.
10. 10
ZQ500 Series User Guide
The smart battery’s health has three states: GOOD, REPLACE,
and POOR. The battery health factor determines whether or not
the printer can operate and what is communicated to the user via
the display.
# of Charge Cycles Health Power-up Message
<300 GOOD None
>300 but <550 REPLACE “Battery Diminished
Consider Replacing” *
>550 but <600 REPLACE “Warning-Battery
is Past its Useful Life” **
>600 POOR “Replace Battery
Shutting Down” ***
* Warning accompanied by three beeps in rapid succession.
** Warning accompanied by a series of three double beeps in
rapid succession.
*** Warning will flash on and off and be accompanied by
beeping at a rate of once per second. After 30 seconds the
printer will shut down.
Printing Technology
The ZQ500 Series printers use the Direct Thermal method to
print human readable text, graphics and barcodes. It incorporates
a sophisticated print engine for optimal printing under all opera-
tional conditions.
Direct Thermal
Direct thermal printing uses heat to cause a chemical reac-
tion on specially treated media. This reaction creates a dark mark
wherever a heated element on the printhead comes in contact
with the media. Since the printing elements are arranged very
densely at 203 d.p.i. (dots per inch) horizontal and 200 d.p.i. ver-
tical, highly legible characters and graphic elements may be
created a row at a time as the media is advanced past the print-
head. This technology has the advantage of simplicity, as there
is no requirement for consumable supplies such as ink or ton-
er. However, since the media is sensitive to heat, it will gradually
loose legibility over long periods of time, especially if exposed to
environments with relatively high temperatures.
_
_
_
11. 11
ZQ500 Series User Guide
Thermal Shutdown
The ZQ500 Series printers have a thermal shutdown feature
whereby the printer hardware will detect a printhead over-tem-
perature condition at 65o
C. The printer will automatically stop
printing until the printhead cools down to 60o
C. Printing will then
recommence without a loss of label data or without any degrada-
tion of print quality.
QR Code
The QR barcode includes human readable text (URL) which
links the user to printer information and short videos on topics
such as buying supplies, features overview, loading media, print-
ing a configuration report, cleaning instructions, and accessory
information. (See Page 13 for each printer’s URL address.)
Made for iPhone (MFi)
ZQ500 Series printers support communication with Apple de-
vices running iOS 5 or later over a standalone Bluetooth 4.0 radio
and the BT3.0 radio included with the 802.11n (dual) radio.
Near Field Communication (NFC)
A passive NFC tag with the Bluetooth printer address will pro-
vide instant access to printer-specific information via an NFC-
enabled smartphone. The ZQ500 Series printers are also active
NFC devices that can not only collect information but exchange
that information with other compatible devices.
12. 12
ZQ500 Series User Guide
ZQ500 Series Overview (ZQ510 Shown)
2
7
9
6
1
4
3
8
5
10
11
(Not present in Linerless.
Scraper present instead)
4
1. Platen Roller
2. Black Bar Sensor
3. Media Support Disks
4. Tear Bar
5. Media Cover Button
6. Media Cover
7. Printhead
8. Gap Sensor
9. Strap Post
10. USB Port
11. DC Input
12. Power Button
13. Control Panel
14. Belt Clip Opening
15. Select Button
16. Paper Feed Button
12 13 14 15 16
13. 13
ZQ500 Series User Guide
+MXXXXXXXXXXXX +MXXXXXXXXXXXX
20 18
17
19
20
21 21
17. Battery
18. Docking Contacts/Cover
19. QR Code
20. MAC Address/Bluetooth ID Labels
21. Mounting Points
22. Zebra Print TouchTM
Icon NFC)
22
9
Note: Tapping the Zebra Print TouchTM
icon with a Near Field
Communication (NFC) enabled smartphone will provide instant
access to printer-specific information. For more information about
NFC and Zebra products, go to http://www.zebra.com/nfc.
Bluetooth pairing applications via NFC is also possible. Please see
Zebra Multi-platform SDK for more information.
Note: Scanning the QR code with a smartphone will provide printer-
specific information at www.zebra.com/zq510-info and
www.zebra.com/zq520-info.
14. 14
ZQ500 Series User Guide
Getting Ready to Print
Battery
Installing the Battery
Important • Batteries are shipped in sleep mode to preserve their
maximum capacity while in storage prior to initial use. Plug the
battery into the Smart Charger 2 or Quad Charger (see Pg. 17) to wake
it up before using for the first time.
1. Locate the battery compartment on the bottom of the
printer.
2. Insert the battery into the printer as shown in Figure 1. (It
is not possible to insert the pack in an incorrect orienta-
tion.)
3. Rock the battery into the compartment as shown until it
locks in place.
When the battery is first installed, the control panel indica-
tors may briefly turn on and then go off which indicates the
battery is not fully charged.
Figure 1: Installing the Battery (ZQ510 Shown)
+MXXXXXXXXXXXX +MXXXXXXXXXXXX
15. 15
ZQ500 Series User Guide
Battery Safety
Caution • Avoid accidental short circuiting of any battery. Allowing
battery terminals to contact conductive material will create a short
circuit which could cause burns and other injuries or could start a
fire.
Important • Always refer to the Important Safety Information data
sheet shipped with each printer and the Technical Bulletin shipped
with each battery pack. These documents detail procedures to
ensure maximum reliability and safety while using this printer.
Important • Always dispose of used batteries properly. Refer to
Appendix E for more battery recycling information.
Caution • Use of any charger not approved specifically by Zebra for
use with its batteries could cause damage to the battery pack or the
printer and will void the warranty.
Caution • Do not incinerate, disassemble, short circuit, or expose to
temperatures higher than 65o
C (149o
F).
Charger Safety
Do not place any charger in locations where liquids or metallic
objects may be dropped into the charging bays.
16. 16
ZQ500 Series User Guide
The Smart Charger-2 (SC2) is a charging system for use with
the 2-cell lithium-ion smart battery used in the ZQ510 printers.
Charging Status Indicators
The SC2 uses a LED indicator to indicate the charge state in
either Green, Yellow, or Amber as detailed below.
DC Power Input Indicator Battery Status
Present Green Battery not present
Present Green Fully charged
Present Yellow Charging
Present Amber Fault
Present Off Present and Battery
Health = POOR
There will also be a battery charging graphic to indicate that
this LED is the charging status indicator .
Battery Health Indicator
The SC2 features a tri-color (Yellow/Green/Amber) LED to in-
dicate the health of the battery pack. An evaluation of the bat-
tery health begins upon insertion of the battery in the charger
and results in the appropriate LED being illuminated as shown
below. The LED will remain illuminated as long as input power
is applied.
Battery Indicator Health Status
None or non-smart Off
Smart battery present Green GOOD
Smart battery present Yellow CAPACITY DIMINISHED
Smart battery present Flashing yellow PAST USEFUL LIFE
Smart battery present Amber UNUSABLE-REPLACE
(discard per Instructions in
Appendix E
Note • For detailed information on the SC2, refer to the
Smart Charger 2 User Guide (p/n P1040985-001).
Smart Charger-2 (SC2) Single Battery Charger (P1027407)
17. 17
ZQ500 Series User Guide
Figure 2: Smart Charger-2 (SC2)
Height Width Length
65.1 mm (2.56 in.) 101.5 mm (4 in.) 120.9 mm (4.75 in.)
SC2 Dimensions
Charge Status Icon Health Status Icon
Model UCLI72-4 Quad Charger (AC18177-5)
The UCLI72-4 Quad Charger is designed to charge up to four (4)
ZQ500 Series battery packs simultaneously. Batteries must be re-
moved from the printer to be charged in the Quad Charger.
1. Ensure that the charger has been installed properly per the
Quad Charger instruction manual. Ensure that the power indi-
cator on the front panel is on.
2. Plug a battery pack into any one of the four charging bays as
shown in Figure 5, noting the orientation of the battery pack.
Slide the battery pack into the charging bay until it stops and
then rock the battery pack back until it snaps into place. The
amber indicator directly under the battery being charged will
turn on if the battery is properly inserted.
Smart Battery
Charge Status
LED Indicator
Health Status
LED Indicator
18. 18
ZQ500 Series User Guide
Quad Charger Cycle Times :
Battery Status ZQ510
Battery 80% Charged 1.5 Hrs.
Battery Fully Charged < 5 Hrs.
Note • These times are for completely discharged batteries.
The indicators under the battery will allow you to monitor the
charging process per the table below:
Amber Green Battery Status
On Off Charging
On Flashing
80% charged (O.K.
to use)
Off On Completely Charged
Flashing Off Fault-Replace
Battery
Important • A fault condition is caused by a problem with the battery.
The charger may indicate a fault because the battery is too hot or cold
to charge reliably. Try to charge the battery again when it returns to the
room’s ambient temperature. If the amber indicator starts flashing on
the second attempt, the battery should be discarded. Always dispose of
batteries in a proper manner as described in Appendix F.
Figure 3: Quad Charger
Charger Bay
Amber
Indicator
Green
Indicator
Power Indicator
Power Supply
1. Slide Battery Pack
into Charger bay.
2. Rock Battery Pack into place.
19. 19
ZQ500 Series User Guide
Battery packs which are only partially discharged will take less
time to reach their charged state. Batteries which have reached
80% of their charge capacity may be used, however, it is rec-
ommended that you allow the batteries to reach a full charge to
maintain maximum battery life.
The UCLI72-4 Quad Charger has a safety feature which stops charging a
battery after six hours regardless of its charge state. If not fully charged,
it might be indicative of a battery that needs to be replaced.
Use care when installing the UCLI72-4 Quad Charger so that you do not
block the ventilating slots on the top and bottom covers. Ensure that the
charger is plugged into a power source which will not accidently be
turned off if you will be charging batteries overnight.
AC Power Adapter (included in kit p/n P1031365-024 for all
ZQ510 Printers)
Figure 4: Charging the Battery Pack with the AC Power Adapter)
ZQ510 AC
Adapter
DC Input
AC Power Cord
(varies with
geographic
location)
20. 20
ZQ500 Series User Guide
Vehicle Cradle (P1063406-029)
The ZQ500 Series Vehicle Cradle provides a means to mount a
ZQ510 and ZQ520 printer in a vehicle while at the same time pro-
viding charging power to the battery. The Vehicle Cradle features
USB connectivity to allow the user to connect a laptop or tablet
to the cradle.
Battery Eliminator (P1063406-032)/Battery Eliminator Vehicle
Cradle (P1063406-028)
The ZQ500 Series Battery Eliminator allows a vehicle based
mobile printer user to operate the printer without the use of a
battery. The Battery Elimnator Vehicle Cradle enables the user
to mount a ZQ500 Series printer in a vehicle without the use of a
battery.
4-Bay Power Station (P1063406-027)
The ZQ500 4-Bay Power Station allows a total of four (4) ZQ510
or ZQ520 printers to be docked and charged. The Power Station
provides battery charging power while still maintaining all of the
printer’s functionality.
Note • For detailed information on accessories, refer to the ZQ500VC
User Guide (P1071204-001), the ZQ500 4-Bay Power Station User Guide
(P1071266-001), the Battery Eliminator User Guide (P1071365-001), and
the Battery Eliminator Cradle User Guide (P1073631-001).
• Open the protective cover on the ZQ510 printer to expose
the DC input charger jack.
• Connect the appropriate AC power cord for your location to
the adapter and then plug the power cord into an AC recep-
tacle.
• Plug the barrel plug from the P1029871 AC adapter into the
charger jack on the printer.
• The printer will power up and begin charging. The printer
can be left on or turned off at this point. Charging will contin-
ue in either state.
Note • Batteries are shipped in sleep mode to preserve their maximum
capacity while in storage prior to initial use. Plug the battery into the
Smart Charger 2 or Quad Charger (see Pg. 17) to wake it up before using
for the first time.
While it’s possible to charge the battery when using the printer, charge
times will increase under this condition.
21. 21
ZQ500 Series User Guide
Before docking the printer on either the Vehicle Cradle or the
4-Bay Power Station, you must remove the docking contacts
cover located on the bottom of the printer. To remove the cov-
er, firmst remove the battery, and then use a small screwdriver or
coin to detach the cover and expose the docking contacts.
+MXXXXXXXXXXXX+MXXXXXXXXXXXX+MXXXXXXXXXXXX+
Figure 5: Docking and Un-Docking the Vehicle Cradle
1
2
Figure 6: Docking and Un-Docking the 4-Bay Power Station
2
1
1
2
22. 22
ZQ500 Series User Guide
Loading the Media in the ZQ500 Series Printers
The ZQ500 Series printers are designed to print either continu-
ous (receipt) media or label stock.
Loading Media Procedure
1. Open the printer (Refer to Figure 7).
•Press the Media Cover Button on the side of the printer as
shown in “1” below. The Media Cover will open automatical-
ly.
•Rotate the Media Cover back completely as shown in “2”, ex-
posing the media compartment and adjustable media sup-
ports.
Figure 7: Opening the Printer
1
Media Cover
Media Cover
Button
Media
Compartment
Media Supports
23. 23
ZQ500 Series User Guide
2. Pull the media supports apart as shown in Figure 8 be-
low. Insert the roll of media (in the orientation shown) between
the supports and let the supports secure the media in place. The
supports will adjust themselves to the width of the media, and
the media roll should be able to spin freely on the supports.
Figure 8: Loading Media
3. Close the Media Cover until it clicks into place and the me-
dia will advance as shown .
4
24. 24
ZQ500 Series User Guide
Operator Controls
The ZQ510 and ZQ520 feature a control panel with buttons for
the Power On/Off and Media Feed functions, as well as a display
for providing information regarding printer functions (Fig. 9). The
menu displays a single row of icons used to indicate printer sta-
tus. The LCD also displays acknowledged alerts and non-acknow-
leged alerts. Acknowledged alerts have a single response option
which requires the user to press the “Select” button.
Figure 9: Control Panel
Printer Status Icons
Indicates the status of several printer
functions
Select Button
Press to select a menu
choice on the LCD
Power Button
Press to turn unit on.
Press again to turn
unit off.
Feed Button
Press to advance the media one
blank label or a software deter-
mined length of journal media.
Printer Status Icons
DC
Bluetooth
WiFi Connection
WiFi Signal
Strength
Error
Data
Media
Cover Open
Battery
Battery Eliminator
Power Save Mode
Draft Mode
25. 25
ZQ500 Series User Guide
Icons for Power Save Mode and Draft Mode are also dis-
played on the control panel in place of the Media Out Icon. When
the printer is in Power Save Mode and is not in a media out con-
dition, the Power Save icon shall display. When the printer is in
Power Save Mode and also in a media out condition, the Media
Out icon will be displayed instead of the Power Save icon. This is
due to the fact that the printer is not running when there is a media
out condition. If the printer is in both Power Save Mode and Draft
Mode, the Power Save icon will be displayed.
When the printer is in Draft Mode due to a user setting, the Draft
Mode icon will be displayed. However, when the printer is in Draft
Mode and in a media out condition, the blinking Media Out icon
will be displayed.
Buttons
The User has the ability to use the three button interface on the
ZQ510 and ZQ520 with the following Power Up and Run Time se-
quences.
Power Up Sequences
Sequence
#
Function Keys Button
1 Two Key Report Hold down Feed button
while pressing the Power
button
2 Config Label then
Network Label
Hold down Select button
while pressing the Power
button
3 Forced Download Hold down the Select and
Feed buttons while pressing
the Power button
4 Causes the unit to
turn on or off or to
enter Sleep Mode
Power Button
26. 26
ZQ500 Series User Guide
Run Time Sequences without LED Flashes
Sequence # Function Keys Button
1 Two-key and ZPL
Config
Hold down Feed
button and Select
button for 3 seconds
2 Repeated Feed
Events
Feed button
3 Wake (if in Sleep
Mode)
Power button or
Select button
LED’s
The ZQ500 Series printers feature a tri-colored LED ring locat-
ed around the Power button which shows the state of the battery
during charging processes (as shown below).
Power On/Charged Battery
Power On/Battery Eliminator Plugged In
Battery Charging (Yellow LED Ring)
Sleep Mode (Blinking Green LED Ring)
Battery Fault (Red LED Ring)
Alerts
The control panel has the ability to display various alerts to the
user in the form of Acknowledged Alerts, Non-Acknowledged
Alerts, and Error Alerts.
An Acknowledged Alert displays over the printer status icons
and requires user input to be cleared, i.e. press the Select button
to clear such an alert.
(( ))
BATTERY LOW
LED showing
battery fault
Acknowledged
Alert
27. 27
ZQ500 Series User Guide
A Non-Acknowledged Alert also displays over the printer status
icons, but in this case it does not require user input to be cleared.
The alert will automatically be cleared after being displayed for
five (5) seconds.
Error Alerts also appear over the printer status icons and require
no user input via the front panel to be cleared, but they do require
the user clearing the error condition by other means. The Error
Alert will remain on the display until the error condition is cleared.
Power Saving Features
The ZQ500 Series printers have a few key features designed to
extend the life of the battery. These features are described below.
Sleep Mode
The Sleep Mode feature is a way the printer conserves battery
life whereby the printer will automatically go into a “sleep” state
after two (2) minutes of inactivity. When the printer is in this state
there will be no content displayed on the LCD in addition to no
backlight. The printer will indicate Sleep Mode by a slow blinking
green LED ring around the Power Button (See Page 26).
If the Power Button is pressed for less than three (3) sec-
onds (<3), then the printer will enter Sleep Mode.
If the Power Button is pressed for more than three (3) seconds
(>3), then the printer will execute a soft power down.
In order to “wake up” the printer, the user must press the Power
or Select buttons for less than three (3) seconds, or the print-
er will wake up on its own when communication is initiated via
Bluetooth. If the Power Button is pressed for more than three (3)
seconds, the printer will wake up and shut down completely.
28. 28
ZQ500 Series User Guide
To enable or disable Sleep Mode, send the power.sleep.en-
able command to the printer using Zebra Setup Utilities (ZSU)
and set it to either “on” or “off”. (The default setting is “on”.) To set
the time after which the printer will enter Sleep Mode, send the
power.sleep.timeout (in seconds) to the printer using the ZSU.
Power Save Mode
Power Save Mode refers to a state the printer will enter when
the battery is under duress. Under normal operation with a
healthy fully charged battery, the printer will load the entire print-
head while printing a line of data.
As the battery’s health declines (due to low voltage or cold tem-
perature) the printer will change its printing strategy in a way that
breaks up the print line into smaller segments that it can print
safely without shutting down the battery. In this mode the user
may experience slower printing.
The Power Save icon will be displayed on the LCD as this is
occurring and the printer may have an audible sound change due
to the altered motor step rate while in this mode.
Draft Mode
The user can configure the printer to print in Draft Mode via
SGD command media.draft _ mode (default is “off”), which op-
timizes the printer for text-only printing. While in Draft Mode, print
speed increases from 4 inches per second (ips) to 5 ips with ap-
proximately a 22% reduction in optical density. When a printer is
in this user setting, a Draft Mode icon will be displayed. If the
printer is in both Power Save mode and Draft Mode, the Power
Save icon will display. If the printer is in Draft Mode during a me-
dia out condition, the blinking Media Out icon will be displayed.
Note • For an explanation and a list of all SGD commands, please refer to
the Programming Guide (p/n P1012728-xxx) at:
http://www.zebra.com/us/en/support-downloads.html
Note • For detailed information on sending SGD commands to the printer
using Zebra Setup Utilities, please refer to the Wireless Configuration for
802.11n and Bluetooth Radios for Link-OS Mobile Printers (p/n P1048352-
001) at: http://www.zebra.com/us/en/support-downloads.html
29. 29
ZQ500 Series User Guide
Connecting the Printer
The printer must establish communications with a host terminal
which sends the data to be printed. Communications
occur in four (4) basic ways:
• ZQ500 Series printers can communicate by cable via either
a standard USB 2.0 or micro USB protocols. USB drivers are in-
cluded in the Zebra Designer Driver which can be downloaded
from www.zebra.com/drivers.
• By means of a wireless LAN (Local Area Network) per
802.11 specifications. (Optional)
• By means of a Bluetooth short range radio frequency link.
• WinMobile®, Blackberry®, and Android® devices use
standard Bluetooth protocol.
• ZQ500 Series printers are compatible with iOS devices,
therefore printing via Bluetooth to an Apple® device is possi-
ble.
Verify Printer is Working
Before you connect the ZQ500 Series printer to your computer,
make sure that the printer is in proper working order. You can do
this by printing a configuration label using the “two key” method.
If you can’t get this label to print, refer to the “Troubleshooting”
section of this manual.
Printing a Configuration Label
1. Turn the printer off. Load the media compartment with
journal media (media with no black bars printed on the back).
2. Press and hold the Feed Button.
3. Press and release the Power button and keep the Feed
button pressed. When printing starts, release the Feed button.
The unit will print a line of interlocking “x” characters to ensure
all elements of the print head are working, print out the version of
software loaded in the printer, and then print the report.
The report indicates model, serial number, baud rate, and more
detailed information on the printer’s configuration and parameter
settings. (Refer to the Troubleshooting section for sample print-
outs and a further explanation on how to use the configuration la-
bel as a diagnostic tool.)
30. 30
ZQ500 Series User Guide
Figure 10: Cable Communication with PC
LAN
USB Communications Cable
to PC
The small 5-pin connector on the USB cable plugs into the
printer, and the connectors are keyed to ensure correct align-
ment. Do not try to force the cable if it does not plug in as this
could damage the pins.
The other end of the cable plugs into the USB port on a com-
puter as shown in Figure 10. The ZQ500 Series printers are
configured with the USB Open HCI interface allowing them to
communicate with Windows®
based devices.
USB drivers are included in the Zebra Designer Driver which
can be downloaded from the Zebra website.
Cable Communication
Caution • The printer should be turned off before connecting or
disconnecting a communication cable.
The standard cable connection for the ZQ500 Series printers is
USB. The USB port provides 500mA to the A/B port when in host
mode and can connect a printer to a PC via a Type A plug to Micro
B plug. The cable has a plastic twist lock cap that provides strain
relief and locks the cable into the printer housing (see below).
Refer to Appendix A for part numbers.
Twist Lock. Rotate in a clock-
wise direction to lock cable
in place.
31. 31
ZQ500 Series User Guide
Wireless Communications with Bluetooth
Bluetooth is a worldwide standard for the exchange of data be-
tween two devices via radio frequencies. This form of point- to-
point communication does not require access points or other
infrastructure. Bluetooth radios are relatively low powered to help
prevent interference with other devices running at similar radio
frequencies. This limits the range of a Bluetooth device to about
10 meters (32 feet). Both the printer and the device it communi-
cates with must follow the Bluetooth standard. Other than con-
ditions specified elsewhere in this manual, only one of the radio
options can be installed in the printer at one time and the anten-
na used for these transmitters must not be co-located or must not
operate in conjunction with any other antenna.
Bluetooth Networking Overview
Each Bluetooth enabled ZQ500 Series printer is identified by
a unique Bluetooth Device Address (BDADDR). This address re-
sembles a MAC address whereby the first three bytes are ven-
dor, and the last three bytes are device (e.g. 00:22:58:3C:B8:CB).
This address is labeled on the back of the printer via a barcode
for ease of pairing. (See Page 34.) In order to exchange data, two
Bluetooth enabled devices must establish a connection.
Bluetooth software is always running in the background, ready
to respond to connection requests. One device (known as the
master or the client) must request/initiate a connection with an-
other. The second device (the slave or the server) then accepts or
rejects the connection. A Bluetooth enabled ZQ500 Series printer
will normally act as a slave creating a miniature network with the
terminal sometimes referred to as a “piconet”.
Discovery identifies Bluetooth devices that are available for pair-
ing whereby the master device broadcasts a discovery re- quest
and devices respond. If a device is not discoverable, the master
cannot pair unless in knows the BDADDR or has previously paired
with the device.
Bluetooth 2.1 or higher uses Security Level 4 Secure Simple
Pairing (SSP), a mandatory security architecture that features four
(4) association models: Numeric Comparison, Passkey Entry, Just
Works (no user confirmation), and Out of Band (pairing info trans-
mitted OOB, e.g. via Near Field Communication).
32. 32
ZQ500 Series User Guide
Figure 11: Bluetooth Security Modes
Security Mode 1
If a BT>/= 2.1 device is pairing
with a BT</= 2.0 device, it falls
back to BT 2.0 compatibility
mode and behaves the same as
BT 2.0. If both devices are BT
>/= 2.1, Secure Simple Pairing
must be used according to the
BT spec.
Security Mode 2
If a BT >/= 2.1 device is pairing
with a BT </= 2.0 device, it falls
back to BT 2.0 compatibility
mode and behaves the same as
BT 2.0. If both devices are BT
>/= 2.1, Secure Simple Pairing
must be used according to the
BT spec.
Security Mode 3
If a BT >/= 2.1 device is pairing
with a BT </= 2.0 device, it falls
back to BT 2.0 compatibility
mode and behaves the same as
BT 2.0. If both devices are BT
>/= 2.1, Secure Simple Pairing
must be used according to the
BT spec.
Security Mode 4: Simple Secure Pairing
Simple Secure Pairing: a new security architecture introduced supported in BT >= 2.1.
Service-level enforced, similar to mode 2. Mandatory when both devices are BT >= 2.1.
There are four association models currently supported by mode 4. Security requirements for
services must be classified as one of the following: authenticated link key required, unauthen-
ticated link key required, or no security required. SSP improves security through the addition
of ECDH public key cryptography for protection against passive eavesdropping and man-in-
the-middle (MITM) attacks during pairing.
Numeric Comparison Passkey Entry Just Works Out of Band (OOB)
Designed for situation
where both devices are
capable of displaying
a six-digit number and
allowing user to enter
“yes” or “no” response.
During pairing, user
enters “yes” if number
displayed on both devic-
es matches to complete
pairing. Differs from
the use of PINs in
legacy (BT<=2.0)
pairing because the
number displayed for
comparison is not used
for subsequent link key
generation, so even if it
is viewed or captured by
an attacker, it could not
be used to determine
the resulting link or
encryption key.
Designed for situation
where one device has
input capability but no
display (e.g. keyboard),
while other device has
a display. The device
with a display shows a
six-digit number, then
the user enters this
key on the device with
input. As with numeric
comparison, the six-dig-
it number is not used in
link key generation.
Designed for situation
where one (or both) of
the pairing devices has
neither a display nor
keyboard for entering
digits (e.g. Bluetooth
headset). It performs
authentication step 1
in the same manner as
as numeric compar-
ison, but the user
cannot verify that both
values match, so MITM
(man-in-the-middle) pro-
tection is not provided.
This is the only model
in SSP that does not
provide authenticated
link keys.
Designed for devices
that support a wireless
technology other than
Bluetooth (e.g. NFC)
for the purposes of
device discovery and
cryptographic value
exchange. In the case
of NFC, the OOB model
allows devices to pair
securely by simply tap-
ping one device against
the other, followed by
the user accepting the
pairing via a single
button push. Security
against eavesdropping
and MITM attacks is
dependant on the OOB
technology.
Each mode, except for Just Works, has Man-In-The-Middle
(MITM) protection, meaning no third device can view the data be-
ing passed between the two devices involved. The SSP mode is
usually negotiated automatically based on the capabilities of both
the master and slave. Lower security modes can be disabled via
the bluetooth.minimum _ security _ mode SGD. The
bluetooth.minimum _ security _ mode SGD sets the lowest
security level at which the printer will establish a Bluetooth con-
nection. The printer will always connect at a higher security lev-
el if requested by the master device. To change the security
mode and security settings in the ZQ510 printer, use Zebra Setup
Utilities.
33. 33
ZQ500 Series User Guide
Figure 12: Bluetooth Minimum Security Modes
BT Version of Master Device (>2.1)
bluetooth.minimum_security_mode=1 Secure Simple Pairing
Just Works/Numeric Comparison
bluetooth.minimum_security_mode=2 Secure Simple Pairing
Just Works/Numeric Comparison
bluetooth.minimum_security_mode=3 Secure Simple Pairing
Numeric Comparison
bluetooth.minimum_security_mode=4 Secure Simple Pairing
Numeric Comparison
bluetooth.bluetooth_PIN
Not Used
bluetooth.minimum _ security _ mode sets the lowest security
level at which the printer will establish a Bluetooth connection. The
printer will always connect at a higher security level if requested by the
master device.
The ZQ500 Series printers also feature bonding for Bluetooth.
The printer caches pairing info so devices stay paired through
power cycles and disconnects. This eliminates the need to re-
pair on every connection establishment.
The bluetooth.bonding SGD is on by default.
Note • For detailed information on Bluetooth, please refer to the
Bluetooth Wireless User Guide (P1068791-001) at:
http://www.zebra.com/us/en/support-downloads.html
In addition, the ZQ500 Series printers support Near Field
Communication (NFC) technology. Using the “Print Touch” fea-
ture located on the side of the printer, end-users can automati-
cally connect via Bluetooth from a handheld device that supports
NFC technology. The NFC tag has the printer’s BDADDR encod-
ed in a URL on the tag. Simply touching the NFC handheld device
to the “Print Touch” icon on the printer will connect and pair the
handheld device to the printer.
34. 34
ZQ500 Series User Guide
WLAN Overview
ZQ500 Series printers can be equipped with a Dual Radio op-
tion, meaning a radio that uses both the industry standard 802.11
protocols and Bluetooth 3.0. All radios units are shipped with
the 802.11n radio enabled (default) and the BT radio disabled.
However, users have the option to enable BT if they wish to use
the dual feature. They will have the FCC ID number on the serial
number label on the back of the unit.
•ZQ500 Series Wireless Network Printers with the Zebra
802.11 WLAN radio module can be identified by the text
“Wireless Network Printer” on the serial number label on the back
of the printer.
•These printers allow communication as a node within a wire-
less local area network (WLAN). Methods of establishing commu-
nications to the printer will vary with each application.
More information and LAN configuration utilities are included
in the Zebra Net Bridge™ program (version 2.8 and later). Zebra
Setup Utilities (ZSU) can also be used to configure WLAN com-
munications settings. Both Net Bridge and ZSU may be download-
ed from the Zebra Web site.
In order to obtain the Bluetooth address or the Wireless LAN
address, use a mobile computer to scan the Bluetooth barcode
or the WLAN barcode on the bottom of the printer where shown
in Figure 13.
Figure 13: BT/WLAN Communications
+M
XXXXXXXXXXXX
+M
XXXXXXXXXXXX
Wireless LAN Barcode
Bluetooth Barcode
35. 35
ZQ500 Series User Guide
Setting Up the Software
ZQ500 Series printers use Zebra’s CPCL and ZPL Programming
languages which were designed for mobile printing applications.
CPCL and ZPL are fully described in the ZPL Programming Guide
(p/n P1012728-008) available on-line at www.zebra.com/manuals.
You can also use Designer Pro, Zebra’s Windows®
based label
creation program which uses a graphical interface to create and
edit labels in either language.
Refer to Appendix G for tips on downloading the Designer Pro
application from Zebra’s Web site.
Near Field Communication (NFC)
Much like Bluetooth and Wi-Fi technologies, Near Field
Communication (NFC) allows wireless communication and data
exchange between digital devices like smartphones. Yet NFC uti-
lizes electromagnetic radio fields while technologies such as
Bluetooth and Wi-Fi focus on radio transmissions instead.
NFC is an offshoot of Radio Frequency Identification (RFID), with
the exception that NFC is designed for use by devices within close
proximity to each other, i.e. a smartphone and a ZQ500 Series
printer. NFC allows these devices to establish communication
with each other by touching them together or bringing them into
proximity, usually no more than 7.62 centimeters (3 inches). Three
forms of NFC technology exist: Type A, Type B, and FeliCa. All are
similar but communicate in slightly different ways. FeliCa is com-
monly found in Japan.
Devices using NFC may be active or passive. A passive device,
such as a ZQ500 Series printer with an NFC tag, contains informa-
tion that other devices can read but does not read any information
itself. An active device, such as a smartphone, can read the infor-
mation on the printer’s NFC tag, but the tag itself does nothing ex-
cept transmit the info to authorized devices.
Active devices can read information and send it. An active NFC
device, like a smartphone, would not only be able to collect infor-
mation from NFC tags, but it would also be able to exchange infor-
mation with other compatible phones or devices. An active device
could even alter the information on the NFC tag if authorized to
make such changes.
36. 36
ZQ500 Series User Guide
Figure 14: Near Field Communication (NFC) Pairing
http://www.zebra.com/nfc
Note • Tapping the Zebra Print TouchTM
icon with a Near Field
Communication (NFC) enabled smartphone will provide instant access to
printer-specific information. For more information about NFC and Zebra
products, go to http://www.zebra.com/nfc.Bluetooth pairing applications
via NFC is also possible. Please see Zebra Multi-platform SDK for more
information.
To ensure security, NFC often establishes a secure channel and
uses encryption when sending sensitive information.
37. 37
ZQ500 Series User Guide
ZQ500 Series Accessories
Belt Clip
The ZQ510 and ZQ520 printers come with a plastic Belt Clip
(p/n P1063406-040) as a standard feature.
To use:
1. Slide the plastic Belt Clip securely onto your belt (Fig. 15).
2. Insert the hook on the belt clip into the opening of the
printer’s front bumper as shown.
Figure 15: Using the Belt Clip
Hand Strap
The ZQ500 Series Hand Strap accessory (p/n BT16899-1) attach-
es to the front posts of the printer to provide the user with a con-
venient and secure method of carrying the printer. To attach the
Hand Strap to the printer:
1. Attach one swivel snap hook to its corresponding post on
the front of the printer (Fig. 16).
2. Attach the opposite end of the strap to its corresponding
post on the front of the printer where shown.
Figure 16: Using the Hand Strap
Strap Post
Swivel Snap Hook
38. 38
ZQ500 Series User Guide
Shoulder Strap
A Shoulder Strap accesory (p/n P1063406-035 ) is also offered
to provide another option for comfortably carrying the ZQ510 and
ZQ520 printers. Similar to the Hand Strap, the shoulder strap at-
taches to the two (2) strap posts on the front of the printer via
rugged swivel snap hooks as shown in Fig. 17. The strap is easily
adjustable up to 56 inches from end to end.
Figure 17: Using the Shoulder Strap
ZEBRAZQ520
Strap Post
Swivel Snap Hooks
Adjustable Clip
Soft Case
The ZQ500 Series printers have an environmental Soft Case op-
tion (P1063406-037/-038) that helps protect the printer, while also
allowing the user to carry it from their belt. The paper path is left
open to maintain printing capability and the controls are visible
and accessible while in the case. D-Ring connectors allow for at-
tachment to the shoulder strap option.
39. 39
ZQ500 Series User Guide
Figure 18: Using the Exoskeleton
Exoskeleton
In order to provide extreme ruggedness for the ZQ500 Series
printers, they come with an optional hard case, or “Exoskeleton”
(p/n P1063406-043/-044). This case features a clam shell design
whereby the printer is placed securely inside and the Exoskeleton
is clamped shut. The Exoskeleton comes with a shoulder strap for
easy portability.
All printer ports are inaccessible while the printer is in the hard
case, but the printer control buttons can still be used (Fig. 18).
The user will also be able to mount and charge the printer on the
ZQ500 Series Vehicle Cradle and 4-Bay Power Station while in the
hard case.
Note • Since linerless printers don’t have the reverse tear bar feature
which allows media to be torn both upwards and downwards, it is
recommended that linerless printers not be used with the Exoskeleton.
Linerless media can only be torn down and the Exoskeleton is not resistant
to the adhesive of the linerless media.
Swivel Latch
Control Panel Buttons
40. 40
ZQ500 Series User Guide
Mag Card Reader
The ZQ500 Series printers can be equipped with optional
Magnetic Stripe reader (p/n P1063406-036). The magnetic stripe
card reader allows the user to swipe magnetic stripe cards such
as credit cards through a slot in the printer and then read and pro-
cess the data contained in the card. The Mag Card reader is ca-
pable of reading all three (3) tracks simultaneously, but can be
configured to read two (2) tracks if desired. The reader also fea-
tures an audio indicator to alert users of a successful card swipe.
The Mag Card reader can be encrypted by working with Zebra’s
Professional Services team and getting a key loaded.
The Mag Card reader is installed by removing the existing front
bumper of the printer and replacing it with the Mag Card reader
(as illustrated in Fig. 19 below).
Figure 19: Installing the Mag Card Reader
1. 2.
3. 4.
Bi-directional
swiping capability
T4.7 +/- 1 in. lb.
Note • For a complete list of accessories, see ZQ500 Series Accessories
on Page 59.
41. 41
ZQ500 Series User Guide
Preventive Maintenance
Extending Battery Life
•Never expose the battery to direct sunlight or temperatures
over 65° C (149° F).
•Always use a Zebra charger designed specifically for Lithium-
Ion batteries. Use of any other kind of charger may damage the
battery.
•Use the correct media for your printing requirements. An au-
thorized Zebra re-seller can help you determine the optimum me-
dia for your application.
•If you print the same text or graphic on every label, consider
using a pre-printed label.
•Choose the correct print darkness, and print speed for your
media.
•Use software handshaking (XON/XOFF) whenever possible.
•Remove the battery if the printer won’t be used for a day or
more and you’re not performing a maintenance charge.
•Consider purchasing an extra battery.
•Remember that any rechargeable battery will lose its ability
to maintain a charge over time. It can only be recharged a finite
number of times before it must be replaced. Always dispose of
batteries properly. Refer to Appendix E for more information on
battery disposal.
General Cleaning Instructions
Caution • Avoid possible personal injury or damage to the printer. Never
insert any pointed or sharp objects into the printer. Always turn off the
printer before performing any cleaning procedures. Use care when
working near the tear bars as the edges are very sharp.
Warning • The printhead can get very hot after prolonged printing. Allow
it to cool off before attempting any cleaning procedures.
Only use a Zebra cleaning pen (not supplied with the printer) or a cotton
swab with alcohol for cleaning the printhead.
Caution • Use only cleaning agents specified in the following tables.
Zebra Technologies Corporation will not be responsible for damage
caused by any other cleaning materials used on this printer.
42. 42
ZQ500 Series User Guide
ZQ500 Series Cleaning
Area Method Interval
Printhead Use a Zebra cleaning pen or
70% isopropyl alcohol on
a cotton swab to clean the
print elements from end to
end (the print elements are
located in the thin gray line
on the printhead).
After every five rolls of
media (or more often,
if needed). When using
linerless type media,
cleaning is required after
every roll of media.
Platen Surface (Linered
and Linerless)
Rotate the platen roller and
clean it thoroughly with
the cleaning pen or 70%
isopropyl alcohol and a
cotton swab (Fig. 20a/Fig.
20b).
After every five rolls of
media (or more often, if
needed) Linerless media
requires more frequent
cleaning, i.e. after every roll.
Scraper (Linerless Units
Only)
Use a cleaning pen to clean
scraper on linerless units.
(Fig. 20b)
After every five rolls of
media (or more often, if
needed).
Tear Bars Clean thoroughly with
the cleaning pen or 70%
isopropyl alcohol and a
cotton swab. (Fig. 20a)
As needed
Printer Exterior Water-dampened cloth
or 70% Isopropyl alcohol
wipe.
As needed
Printer Interior Brush/air blow. Ensure the
Bar Sensor and Gap Sensor
windows are free of dust.
(Fig. 20a)
As needed
Interior of units with
Linerless Platens
Clean thoroughly with
the cleaning pen or 70%
isopropyl alcohol and a
cotton swab. (See Fig. 20b
for specific target areas for
interior cleaning.)
After every five rolls of
media (or more often, if
needed).
43. 43
ZQ500 Series User Guide
Figure 20a: Cleaning the ZQ500 Series Printers (Linered)
Platen Roller
Gap Sensor
Bar Sensor
Printhead
Elements
Tear Bar
Tear Bar
Figure 20b: Cleaning the ZQ500 Series Printers (Linerless)
Media Support Disks
Media Supports
Printer Frame
Scraper
Platen Roller
Platen Holder
Printhead
Elements
44. 44
ZQ500 Series User Guide
Troubleshooting
Front Control Panel
If the printer is not functioning properly, refer to the table below
to determine the state of the LED indicator ring located around the
Power button.
Green Yellow Red Indication
Solid Off Off Charged Battery
Battery Eliminator
in Use
Off Solid Off Battery Charging
Blinking Off Off Sleep Mode
Off Off Solid Battery Fault
Printer Status Indicators
The printer’s control panel displays multiple icons which indi-
cate the status of various printer functions. Check the indicator
status and then refer to the Troubleshooting topic referenced on
the following pages to resolve the problem.
Icon Status Indication
On Bluetooth link established
Grayed Out Inactive
Blinking Receiving printer data
Not Present No WLAN radio detected
Antenna Blinking Looking for AP
Antenna Blinking/1 Parenthesis
Solid
WLAN Associated/Attempting Authen-
tication
Antenna and 2 Parentheses Solid WLAN Associated and Authenticated
Antenna and 2 Parentheses
Blinking
Receiving Data
4 Bars 802.11 Signal Strength >75%
3 Bars 802.11 Signal Strength </=75%
2 Bars 802.11 Signal Strength </= 50% but
>25%
1 Bar 802.11 Signal Strength </= 25%
0 Bars No signal strength
Not Present No error condition
Blinking Error condition (excluding Latch Open
or Media Out)
45. 45
ZQ500 Series User Guide
DC
Icon Status Indication
Blinking Data processing in progress
Steady No data being received
Blinking Out of media
Steady Media present
Blinking Media cover open
4 Bars >80% charged
3 Bars 60%-80% charged
2 Bars 40%-60% charged
1 Bar 20%-40% charged
0 Bars Low Battery
On Battery Eliminator present
(Replaces Battery icons)
On
(Media Out icon Off)
Printer in Segmentation Mode
On
(Media Out icon Off)
Printer in Draft Mode
Troubleshooting Topics
1. No power:
•Check that battery is installed properly.
•Recharge or replace battery as necessary.
•If using battery eliminator, ensure that it is connected properly
to power source
Always dispose of batteries properly. Refer to Appendix F for more
information on proper battery disposal.
2. Media does not feed:
•Be sure media cover is closed and latched.
•Check spindle holding media for any binding.
•Ensure label sensor is not blocked.
3. Poor or faded print:
•Clean print head.
•Check quality of media.
46. 46
ZQ500 Series User Guide
4. Partial or missing print:
•Check media alignment.
•Clean print head.
•Ensure media cover is properly closed and latched.
5. Garbled print:
•Check baud rate.
6. No print:
•Check baud rate.
•Replace battery.
•Establish RF Link and/or restore LAN associativity.
•Invalid label format or command structure. Place printer in
Communications Diagnostic (Hex Dump) Mode to diagnose prob-
lem.
7. Reduced battery charge life:
•If battery is older than 1 year old, short charge life may be due
to normal aging.
•Check battery health.
•Replace battery.
8. flashing:
•Flashing Data icon is normal while data is being received.
9. or flashing:
•Check that media is loaded and that the media cover is closed
and securely latched.
10. Communication error:
•Check baud rate.
•Replace cable to terminal.
11. Paper jam:
•Open head release latch and media cover.
•Remove and reinstall media.
47. 47
ZQ500 Series User Guide
Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration fol-
low these steps:
1. Turn the printer off. Load the media compartment with
journal media (media with no black bars printed on the back).
2. Press and hold the Feed Button.
3. Press and release the Power button and keep the Feed
button pressed. When printing starts, release the Feed button.
Communications Diagnostics
If there is a problem transferring data between the comput-
er and the printer, try putting the printer in the Communications
Diagnostics Mode (also referred to as the “DUMP” mode). The
printer will print the ASCII characters and their text represen- ta-
tion (or the period ‘.’, if not a printable character) for any data
received from the host computer.
12. Blank LCD screen:
•Make sure printer is turned on.
•No application loaded or application corrupted: reload pro-
gram.
•Check LED ring around Power button to see if it’s blinking yel-
low. indicating the printer is in sleep mode. Press Power or
Select buttons to “wake up” the printer.
13. Magnetic Strip Card Won’t Read
•Ensure card is inserted with the magnetic stripe facing in the
correct direction.
•Check card for excessive wear or damage to the magnetic strip.
14. No NFC Connectivity
• Ensure smartphone is positioned 3 inches (7.62 cm) or closer
to the Print Touch icon on the side of the printer.
48. 48
ZQ500 Series User Guide
To enter Communications Diagnostics Mode:
1. Print a configuration label as described above.
2. At the end of the diagnostics report, the printer will print:
“Press FEED key to enter DUMP mode”.
3. Press the FEED key. The printer will print: “Entering DUMP
mode”.
Note • If the FEED key is not pressed within 3 seconds, the printer will
print “DUMP mode not entered” and will resume normal operation.
4. At this point, the printer is in DUMP mode and will print
the ASCII hex codes of any data sent to it, and their text represen-
tation (or “.” if not a printable character).
Additionally, a file with a “.dmp” extension containing the
ASCII information will be created and stored in the printer’s
memory. It can be viewed, “cloned” or deleted using the Net
Bridge application. (Refer to the Net Bridge documentation for
more information.)
To terminate the Communications Diagnostics Mode and re-
turn the printer to normal operations:
1. Turn the printer OFF.
2. Wait 5 seconds.
3. Turn the printer ON.
Contacting Technical Support
If the printer fails to print the configuration label, or you en-
counter problems not covered in the Troubleshooting Guide, con-
tact Zebra Technical Support. Technical Support addresses and
phone numbers for your area can be found in Appendix H of this
manual. You will need to supply the following information:
•Model number and type (e.g. ZQ510)
•Unit serial number (Found on the large label on the back of the
printer, also found in the configuration label printout.
•Product Configuration Code (PCC) (15 digit number found on
the label on the back of the unit)
49. 49
ZQ500 Series User Guide
Figure 21a: ZQ500 Series Configuration Label (ZQ510 Shown)
Printhead Test
Identifies Printer
as a ZQ510
MFi Supported
Printer Serial
Number
50. 50
ZQ500 Series User Guide
Figure 21b: ZQ500 Series Configuration Label (cont.)
802.11 radio option /n
installed. This section
details the radio’s
network settings
Network Information
Scan QR code to go to
ZQ500 Series product
support website
Peripherals Installed
51. 51
ZQ500 Series User Guide
Figure 21c: ZQ500 Series Configuration Label (cont.)
Flash and RAM Memory
Installed
Maximum Label Size
Resident Human Readable
Fonts Installed
Files loaded in printer
memory (includes pre-
scaled or scalable fonts)
52. 52
ZQ500 Series User Guide
Specifications
Note • Printer specifications are subject to change without notice.
Printing Specifications
Parameter ZQ510 ZQ520
Print Width Max 72 mm (2.83 in.) Max 104 mm (4.09 in.)
Print Speed 101.6 mm (4 in.)/second @
12% max density
88.9 mm (3.5 in.)/second @
12% max density
76.2 mm (3 in.)/second @ 16%
max density (linerless media)
76.2 mm (3 in.)/second @ 16%
max density (linerless media)
Printhead Burn
Line to Tear Edge
Distance
4.8 mm (0.18 in.) +/- 0.5 mm
(0.02 in.)
4.8 mm (0.18 in.) +/- 0.5 mm
(0.02 in.)
Printhead Life 600,000 inches Mean Time to
Failure of output at 18% densi-
ty at 20C using virgin media
600,000 inches Mean Time to
Failure of output at 18% densi-
ty at 20C using virgin media
Print Density 203 dots/in. or better 203 dots/in. or better
Memory and Communications Specifications
Parameter ZQ510 ZQ520
Flash Memory 512 MB 512 MB
RAM Memory 256 MB 256 MB
Standard
Communications
USB (Micro AB on the go) USB (Micro AB on the go)
Wireless
Communication
Dual Mode Bluetooth
2.1+EDR/4.0 Low Energy
Dual Mode Bluetooth
2.1+EDR/4.0 Low Energy
Dual Radio (BT 3.0/802.11
a/b/g/n)
Dual Radio (BT 3.0/802.11
a/b/g/n)
53. 53
ZQ500 Series User Guide
Label Specifications
Parameter ZQ510 ZQ520
Media Width 35 mm (1.38 in.) to
80 mm (3.15 in.)
70 mm (2.75 in.) to
113 mm (4.45 in.)
Media Length 12.5 mm (0.5 in.) minimum 12.5 mm (0.5 in.) minimum
Black Bar Sen-
sor to Printhead
Burnline Dis-
tance
16 mm (0.62 in.) +/-
0.6 mm (0.02 in.)
0.62 in. (16 mm) +/-
0.6 mm (0.02 in.)
Media Thick-
ness
0.058 mm (0.002 in.) to
0.161 mm (0.006 in.)
0.058 mm (0.002 in.) to
0.161 mm (0.006 in.)
Max Tag Thick-
ness
0.139 mm (0.005 in.) 0.139 mm (0.005 in.)
Max Roll Outer
Diameter
51 mm (2.0 in.) 57 mm (2.25 in.)
Inner Core
Diameters
19 mm (0.75 in.) standard
12.5 mm (0.5 in.) optional*
19 mm (0.75 in.) standard
12.5 mm (0.5 in.) optional*
Black Mark
Location
Centered on media roll Centered on media roll
Black Mark
Dimensions
L: 2.4 mm to 11.0 mm (0.09 in.
to 0.43 in.)
W: 12.7 mm (0.5 in.)
L: 2.4 mm to 11.0 mm (0.09 in.
to 0.43 in.)
W: 12.7 mm (0.5 in.)
Note • Customers who want to use the 12.5 mm (0.5 in.) core size will be
required to uninstall the media disks and install new media support disks
(p/n P1063406-025).
54. 54
ZQ500 Series User Guide
CPCL Font and Bar Code Specifications and Commands
Standard Fonts 25 bit-mapped fonts; 1 scalable font (CG Trimvirate
Bold Condensed*) *Contains Monotype UFST from
downloadable optional bit-mapped & scalable fonts via
Net Bridge software.
Available Optional Fonts Optional International character sets: Chinese 16 x 16
(trad), 16 x 16 (simplified),24 x 24 (simplified); Japa-
nese 16 x 16, 24 x 24
Linear Bar Codes Avail-
able
Barcode (CPCL Command)
Aztec (AZTEC)
Codabar (CODABAR, CODABAR 16)
UCC/EAN 128 (UCCEAN128)
Code 39 (39, 39C, F39, F39C)
Code 93 (93)
Code 128 (128)
EAN 8, 13, 2 and 5 digit extensions (EAN8, EAN82,
EAN85, EAN13,
EAN132, and EAN135)
EAN-8 Composite (EAN8)
EAN-13 Composite (EAN13)
Plessey (PLESSEY)
lnterleaved 2 of 5 (I2OF5)
MSI (MSI, MSI10, MSI1110)
FIM/POSTNET (FIM)
TLC39 (TLC39)
UCC Composite A/B/C (128(Auto))
UPCA, 2 and 5 digit extensions (UPCA2 and UPCA5)
UPCA Composite (UPCA)
UPCE, 2 and 5 digit extensions (UPCE2 and UPCE5)
UPCE Composite (UPCE)
MaxiCode (MAXICODE)
PDF 417 (PDF-417)
Datamatrix (using ZPL emulation) (DATAMATRIX)
QR Code (QR)
2-D Bar Codes Available RSS:
RSS-14 (RSS-Subtype 1)
RSS-14 Truncated (RSS-Subtype 2)
RSS-14 Stacked (RSS-Subtype 3)
RSS-14 Stacked Omnidirectional
(RSS-Subtype 4)
RSS Limited (RSS-Subtype 5)
RSS Expanded (RSS-Subtype 6)
Rotation Angles 0°, 90°, 180°, and 270°
55. 55
ZQ500 Series User Guide
ZPL Font and Bar Code Specifications and Commands
Standard Fonts 15 bit-mapped fonts; 1 scalable font (CG Trimvirate
Bold Condensed*) Downloadable optional bit-
mapped & scalable fonts via Net Bridge software.
Available Optional Fonts Zebra offers font kits covering multiple languages in-
cluding Simplified and Traditional Chinese, Japanese,
Korean,
Hebrew/Arabic, and others.
Linear Bar Codes Available
2-D Bar Codes Available
Barcode (CPCL Command)
Aztec (^B0)
Codabar (^BK)
Codablock (^BB)
Code 11 (^B1)
Code 39 (^B3)
Code 49 (B4)
Code 93 (^BA)
Code 128 (^BC)
DataMatrix (^BX)
EAN-8 (^B8)
EAN-13 (^BE)
GS1 DataBar Omnidirectional (^BR)
Industrial 2 of 5 (^BI)
lnterleaved 2 of 5 (^B2)
ISBT-128 (^BC)
LOGMARS (^BL)
Micro-PDF417 (^BF)
MSI (^BM)
PDF-417 (^B7)
Planet Code (^B5)
Plessey (^BP)
Postnet (^BZ)
Standard 2 of 5 (^BJ)
TLC39 (^BT)
UPC/EAN extensions (^BS)
UPC-A (^BU)
UPC-E (^B9)
Maxi Code (^BD)
QR Code (^BQ)
Rotation Angles 0°, 90°, 180°, and 270°
56. 56
ZQ500 Series User Guide
Communication Port
USB
Physical, Environmental and Electrical Specifications
Parameter ZQ510 ZQ520
Weight w/ battery 1.38 lbs. (22 oz) 1.72 lbs. (27.5 oz)
Temperature
Operating: -20 °C to 55 °C (-4
°F to 131 °F)
Operating:-20 °C to 55 °C
(-4 °F to 131 °F)
Storage: -30 °C to 66 °C
(-22 °F to 150.8 °F)
Storage: -30 °C to 66 °C
(-22 °F to 150.8 °F)
Charging: 0 °C to 40°C
(32 °F to 104 °F)
Charging: 0 °C to 40°C
(32 °F to 104 °F)
Relative Humidity Operating: 10% to 90%
non-condensing
Operating: 10% to 90%
non-condensing
Battery
Smart Battery (2 cell or 4 cell)
Lithium-Ion, 7.4
VDC (nominal);
2.45 AHr min.
Smart Battery (2 cell or 4 cell)
Lithium-Ion, 7.4
VDC (nominal);
2.45 AHr min.
Intrusion
Protection (IP)
Rating
IP54 (with and without
optional
environmental case)
IP54 (with and without
optional
environmental case)
PIN 5 PIN 1
PIN 1: VBUS
PIN 2: DM(-)
PIN 3: DP(+)
PIN 4: ID
PIN 5: GND
57. 57
ZQ500 Series User Guide
Figure 22: ZQ510 Overall Dimensions
Height
LengthWidth
61 mm
(2.40 in.)
119 mm
(4.68 in.)
149 mm
(5.86 in.)
58. 58
ZQ500 Series User Guide
Figure 23: ZQ520 Overall Dimensions
Height
Width Length
158 mm
(6.22 in.)
67 mm
(2.63 in.)
155 mm
(6.10 in.)
59. 59
ZQ500 Series User Guide
ZQ500 Series Accessories
Part # Description
P1063406-025 KIT, Acc .5” Media Disk Support, ZQ500 Series
P1063406-026 KIT, Acc Swivel Lock Adapter, ZQ500 Series
P1063406-027 KIT, Acc 4-BAY Power Station, ZQ500 Series
P1063406-028 KIT, Acc Battery Eliminator Cradle, ZQ500 Series
P1063406-029 KIT, Acc Vehicle Cradle, ZQ500 Series
P1063406-030 KIT, Acc DC-DC vehicle adapter, open ended, 12~24V
P1063406-031 KIT, Acc DC-DC vehicle adapter, CIG, 12~24V
P1063406-032 KIT, Acc Battery Eliminator, ZQ500 Series
P1063406-033 KIT, Acc Power Adapter for Mobile Battery Eliminator,
12~48V, Cigarette Lighter
P1063406-034 KIT, Acc Convert Cable, 6 inch, ZQ500 Series
P1063406-035 KIT, Acc Rugged Shoulder Strap with Metal Clips, 56 inch
P1063406-036 KIT, Acc Mag Card Reader, ZQ500 Series
P1063406-037 KIT, Acc Soft Case, ZQ510
P1063406-038 KIT, Acc Soft Case, ZQ520
P1063406-039 KIT, Acc 2-roll Media Storage Case
P1063406-040 KIT, Acc Belt Clip, ZQ500 Series
P1063406-041 KIT, Acc D-Ring Adapter Belt Attachment Strap, ZQ500
Series
P1063406-042 KIT, Acc RAM Arm Mounting Plate, ZQ500 Series
P1063406-043 KIT, Acc Exoskeleton Case with Shoulder Strap, ZQ510
P1063406-044 KIT, Acc Exoskeleton Case with Shoulder Strap, ZQ520
P1063406-045 KIT, Acc Micro,USB,B, to,USB,A,Plug,1.8M, ZQ500 Series
P1063406-046 KIT, Acc Micro,USB,B to USB,A,Plug, 3.5M, ZQ500 Series
P1063406-047 KIT, Acc Micro,USB,A to USB,A, Rec., ZQ500 Series
AC18177-5 Model UCLI72-4 Quad Battery Charger (US line cord, see
Sales for others)
BT16899-1 Hand Strap
P1031365-024 KIT ACC QLn AC Adapter US (type A) cord
P1031365-059 KIT ACC QLN220/QLN320 Spare Battery Smart
P1031365-063 Kit ACC SC2 Li-ION Smart Charger, US (type A) cord
P1031365-069 KIT, Acc QLn2/3 and ZQ500 Series Spare Extended Battery
60. 60
ZQ500 Series User Guide
Appendix A
USB Cables
Part Number P1069394;
MICRO,USB,A,TO,USB A, REC
Part Numbers P1069329-001/-002;
Note • Visit the Zebra website at: www.zebra.com/accessories for a
listing of interface cables for all Zebra mobile printers.
CONNECTOR A
CONNECTOR B
PIN 4
PIN 1
PIN 1
PIN 5 CONNECTOR B
5 POSITION USB
MICRO TYPE A
SIGNAL COLOR
CONNECTOR A
4 POSITION USB
TYPE A RECEPTACLE
PIN 1 VBUS RED PIN 1
PIN 2 USB D- WHITE PIN 2
PIN 3 USB D+ GREEN PIN 3
PIN 5 GROUND BLACK PIN 4
MICRO,USB,B,TO,USB,A,PLUG,1.8M/3.5M
CONNECTOR ACONNECTOR B
PIN 4
PIN 1
PIN 1
PIN 5
CONNECTOR B
5 POSITION USB
MICRO TYPE B
SIGNAL COLOR
CONNECTOR A
4 POSITION USB
TYPE A PLUG
PIN 1 VBUS RED PIN 1
PIN 2 USB D- WHITE PIN 2
PIN 3 USB D+ GREEN PIN 3
PIN 5 GROUND BLACK PIN 4
61. 61
ZQ500 Series User Guide
Appendix B
Alert Messages
The ZQ500 Series printers will display the following alert mes-
sages to inform the user of various fault conditions that might oc-
cur with the ZQ510 and 520 printers.
Message Text Line One Text Line Two
HeadOverTemp PRINT HEAD OVERTEMP PRINTING HALTED
HeadMaintenanceNeeded HEAD MAINTEN. NEEDED PRINTING HALTED
BatteryHealthReplace BATTERY DIMINISHED CONSIDER
REPLACING
BatteryHealthNearDeath WARNING - BATTERY IS PAST USEFUL
LIFE
BatteryHealthShutdown REPLACE BATTERY SHUTTING DOWN
BatteryAuthenticationFail BATTERY FAILED REPLACE BATTERY
BatteryOverTemp CHARGING TEMP FAULT MUST BE 0-40°C
BatteryUnderTemp CHARGING TEMP FAULT MUST BE 0-40°C
BatteryChargeFault CHARGING FAULT REPLACE BATTERY
DownloadingFirmware DOWNLOADING FIRMWARE
BadFirmwareDownload DOWNLOAD FAILED PLEASE REBOOT
WritingFirmwareToFlash FIRMWARE WRITING TO FLASH
Mirroring LOOKING FOR UPDATES PLEASE WAIT...
MirroringApplication RECEIVING FIRMWARE DO NOT POWER
OFF!
MirroringCommands MIRRORING COMMANDS
MirroringFeedback SENDING FEEDBACK PLEASE WAIT...
MirrorProcessingFinished MIRROR PROCESSING FINISHED
WlanInvalidChannels WIRELESS ERROR INVALID CHANNEL
WlanInvalidSecurityMode WIRELESS ERROR INVALID SECURITY
PauseRequest PRINTER PAUSED
CancelAll ALL JOBS CLEARED
CancelOne ONE JOB CLEARED
OutOfMemoryStoringGraphic OUT OF MEMORY STORING GRAPHIC
OutOfMemoryStoringFont OUT OF MEMORY STORING FONT
OutOfMemoryStoringFormat OUT OF MEMORY STORING FORMAT
OutOfMemoryStoringBitmap OUT OF MEMORY STORING BITMAP
AckAlertTooManyUsbHostDevices TOO MANY MASS STORAGE DEVICES
AckAlertUnsupportedUsbHostDevice UNSUPPORTED USB HOST DEVICE
AckAlertUnsupportedUsbHostFilesystem UNSUPPORTED USB HOST FILESYSTEM
62. 62
ZQ500 Series User Guide
Appendix C
Media Supplies
To insure maximum printer life and consistent print quality
and performance for your individual application, it is recom-
mended that only media produced by Zebra be used.
Advantages include:
• Consistent quality and reliability of media products.
• Large range of stocked and standard formats.
• In-house custom format design service.
• Large production capacity which services the needs of
many large and small media consumers including major
retail chains world wide.
• Media products that meet or exceed industry standards.
For more information go the Zebra website (www.zebra.com)
and select the Products tab, or refer to the CD included with the
printer.
Appendix D
Maintenance Supplies
In addition to using quality media provided by Zebra, it is
recommended that the printer be cleaned as prescribed in the
maintenance section. The following item is available for this
purpose:
• Cleaning Pen (12 pack): p/n 105950-035
63. 63
ZQ500 Series User Guide
Appendix E
Serial Number and PCC Number Locations
ZQ510
7.4V (7,4) 15A中
Made In China
This product is covered by one or more Zebra US patents
This Class B digital apparatus complies with Canadian ICES - 003
Modelo
Model Thermal Label Printer
Impressora de etiqueta térmica
Rated Input Voltage Max Current
Fabricado na China Tensão nominal de entrada Corrente Max
XXXXSYYWWNNNNNS/N:
XXX-XXXXXXXX-XXPCC:
ZQ520
7.4V (7,4) 15A中
Made In China
This product is covered by one or more Zebra US patents
This Class B digital apparatus complies with Canadian ICES - 003
Modelo
Model Thermal Label Printer
Impressora de etiqueta térmica
Rated Input Voltage Max Current
Fabricado na China Tensão nominal de entrada Corrente Max
XXXXSYYWWNNNNNS/N:
XXX-XXXXXXXX-XXPCC:
ZQ510
(Bottom View)
ZQ520
(Bottom View)
Serial #
Barcode
PCC
Barcode
Serial #
Barcode
PCC
Barcode
64. 64
ZQ500 Series User Guide
Appendix F
Battery Disposal
The EPA certified RBRC® Battery Recycling
Seal on the Lithium-Ion (Li-Ion) battery supplied
with your printer indicates Zebra Technologies
Corporation is voluntarily participating in an
industry program to collect and recycle these
batteries at the end of their useful life, when taken out of ser-
vice in the United States or Canada. The RBRC program provides
a convenient alternative to placing used Li-Ion batteries into the
trash or the municipal waste stream, which may be illegal in your
area.
Important • When the battery is depleted, insulate the terminals with
tape before disposal.
Please call 1-800-8-BATTERY for information on Li-Ion battery
recycling and disposal bans/restrictions in your area.
Zebra Technologies Corporation’s involvement in this program
is part of our commitment to preserving our environment and
conserving our natural resources.
Outside North America, please follow local battery recycling
guidelines.
Product Disposal
The majority of this printer’s components are
recyclable. Do not dispose of any printer compo-
nents in unsorted municipal waste. Please dispose
of the battery according to your local regulations,
and recycle the other printer components according-
to your local standards.
For more information, please see our web site at:
http://www.zebra.com/environment.
65. 65
ZQ500 Series User Guide
Appendix G
Using Zebra.com
The following examples illustrate the search function on Zebra’s
website for finding specific documents and downloads.
Example 1: Find the ZQ500 Series User Guide.
Go to http://www.zebra.com/us/en/support-downloads.html
Select the appropriate printer from the Printer Support dropdown menu.
Click on the Manuals tab and select the desired language from the drop-
down menu.
At the resulting screen, select “ZQ500 Series User Guide (en)” or
Download to view.
Select Printer
(e.g. ZQ520)
Select Language
(e.g. English)
66. 66
ZQ500 Series User Guide
Example 2: Find the ZebraNet Bridge Enterprise download page:
Go to http://www.zebra.com/us/en/products-services/software.html and
click on ZebraLink under Software in the Products and Services section.
Click on “Download” in the Downloads section where shown to access
the latest version of software.
Select ZebraNet
Bridge Enterprise
Click on “Download”
67. 67
ZQ500 Series User Guide
Appendix H
Product Support
When calling with a specific problem regarding your printer,
please have the following information on hand:
• Model number/type (e.g. ZQ520)
• Unit serial number (refer to Appendix E)
• Product Configuration Code (PCC) (refer to Appendix E)
In the Americas contact:
Regional Headquarters Technical Support Customer Service Dept.
Zebra Technologies Corporation
475 Half Day Road, Suite 500
Lincolnshire, Illinois 60069 U.S.A.
T: +1 847 634 6700
Toll Free: +1 866 230 9494
F: +1 847 913 8766
T: +1 877 275 9327
F: +1 847 913 2578
Hardware:
ts1@zebra.com
Software:
ts3@zebra.com
For printers, parts, media,
and ribbon, please call your
distributor, or contact us.
T: +1 877 275 9327
E: clientcare@zebra.com
In Europe, Africa, the Middle East, and India contact:
Regional Headquarters Technical Support Customer Service Dept.
Zebra Technologies Europe Limited
Dukes Meadow
Millboard Road
Bourne End
Buckinghamshire SL8 5XF, UK
T: +44 (0)1628 556000
F: +44 (0)1628 556001
T: +44 (0) 1628 556039
F: +44 (0) 1628 556003
E: Tseurope@zebra.com
For printers, parts, media,
and ribbon, please call
your dis tributor, or
contact us.
T: +44 (0) 1628 556032
F: +44 (0) 1628 556001
E: cseurope@zebra.com
In the Asia Pacific region contact:
Regional Headquarters Technical Support Customer Service Dept.
Zebra Technologies Asia Pacific
Pte. Ltd.
120 Robinson Road
#06-01 Parakou Building
Singapore 068913
T: +65 6858 0722
F: +65 6885 0838
T: +65 6858 0722
F: +65 6885 0838
E: (China)
tschina@zebra.com
All other areas:
tsasiapacific@zebra.com
For printers, parts, media,
and ribbon, please call your
distributor, or contact us.
T: +65 6858 0722
F: +65 6885 0836
E: (China) order-csr@zebra.
com
All other areas:
csasiapacific@zebra.com
68. 68
ZQ500 Series User Guide
Index
Symbols
4-Bay Power Station 20
A
Accessories 3, 4, 37, 40, 59
AC Power Adapter 19
AC Power Adapter (included in kit
p/n P1031365-024) 19, 20
Alerts 26
Appendix A, USB Cables 60
Appendix B, Alert Messages 61
Appendix C, Media Supplies 62
Appendix D, Maintenance Supplies
62
Appendix E, Serial Number and PCC
Number Locations 63
Appendix F, Battery Disposal 64
Appendix G, Using Zebra.com 65
Appendix H, Product Support 67
B
Battery, extending life 41
Battery, health 16
Battery, installing 14
Battery pack
Smart Battery, features 9
Battery, safety 15
Battery Safety Guidelines 19
Belt Clip 3, 37
Bluetooth 30
Bluetooth, networking 31
Bluetooth, security modes 32
C
Cable Communication 29
Charger, battery
UCLI72-4 Quad Charger 17
charging times 18
front panel indicators 18
Charger Safety 15
Charger Safety Guidelines 15
Communication Port 56
Communications Diagnostics 47
Configuration Label, printing 28
Configuration Label, sample 49
Connecting the Printer 29
CPCL Font and Bar Code Specifica-
tions and Commands 54
D
Dimensions, ZQ510 57
Dimensions, ZQ520 58
Document Conventions 7, 41
Draft Mode 28
Dual Radio 34
E
Exoskeleton 3, 39, 59
G
General Cleaning Instructions 41
Getting Ready to Print 14
H
Hand Strap 3, 37, 38, 59
I
Installing the Battery 14
Introduction to the ZQ500™ Series
Printers 8
L
LED’s 26
M
Made for iPhone (MFi) 11
Mag Card Reader 3, 40, 59
Media, loading 22
69. 69
ZQ500 Series User Guide
N
Near Field Communication (NFC) 11
NFC Tag 13
O
Operator Controls 24
P
Power Save Mode 27
Power Up Sequences 25
Preventive Maintenance 3, 41
Printer Status Icons 24
Printer Status Indicators 44
Printing Method
Direct Thermal 10
Programming language
CPCL 8
Q
QR Code 11
Quad Charger, cycle times 18
Quad Charger, UCLI72-4 17
R
Run Time Sequences 26
S
Segmentation Mode 27
Shoulder Strap 3, 38, 59
Sleep Mode 27
Smart Battery 9
Smart Charger-2 (SC2) Single Battery
Charger 16
Soft Case 3, 38, 59
Specifications, label 53
Specifications, memory and commu-
nications 52
Specifications, physical, environmen-
tal and electrical 56
Specifications, printing 52
T
Technical Support, contacting 48
Thermal Shutdown 11
Troubleshooting 44
Troubleshooting, topics 45
Troubleshooting, tests 47
V
Vehicle Cradle 20
Verify Printer is Working 28
W
WLAN, overview 34
Z
ZQ500 Series Overview 12
ZQ500 Series Technology 9
ZPL Font and Bar Code Specifications
and Commands 55
70. 70
ZQ500 Series User Guide
Zebra Technologies Corporation
475 Half Day Road, Suite 500
Lincolnshire, IL 60069 USA
T: +1 847.634.6700 or +1 800.423.0442