What's possible with CENOS Platform?

•Download as PPTX, PDF•

1 like•228 views

CENOS Platform - a simple 3D simulation desktop software for induction heating. Our platform connects the best of community-backed open source tools into one seamless user experience with simple interface for induction heating and hardening applications: - induction coil heating - single-shot hardening - scanning heating - high frequency heating (surface impedance) - DC applications.

Engineering

Possibilities with CENOS Platform
simulation
Applications, Physical control, Results

Contents
3
Applications
Physical control
Results

1. Scanning
4
• Simple and complex motion
• Controllable velocity
• Complex workpiece hardening

5
• Uniform heating
• Fast calculation for axial-symmetric geometries
• Rad/s control
2. Rotation

6
• Fast HF (300 kHz to multiple MHz) case calculation
• Precise JH estimation at high frequencies
• Current density distribution
3. HF Simulation

7
• Choke heating
• Link structure improvements
4. DC link choke (DC line choke)

8
• Adjustable geometry
• Optimal parameter solutions
• Overnight sequence running
5. Design optimization

10
• Constant and dynamic parameters
• Current (amplitude) control
• Voltage control
• Frequency control
1. Power control

11
• Carbon steels
• Magnetic steels
• Temperature dependent
properties
• Customizable materials
• Extensive material library
2. Materials

14
• Temperature at point
• Temperature over line
• Time dependent plots
2. Temperature dynamics

15
• Generator power requirements
• Inductor inductance
3. Energy statistics
Domain: workpiece
Time
Active Power
[W]
Magnetic Energy
[J]
Induced Current.Real
[A]
Induced Current.
Imaginary [A]
Induced Current.
RMS [A]
1 169689.3906 0.984987 -19308.6582 -1590.401489 13699.51953
2 95613.51563 0.934306 -19272.01758 -1578.540894 13673.01074
3 91314.07031 0.784908 -19281.50391 -1543.946655 13677.72266
4 86741.70313 0.661708 -19536.25391 -1488.04248 13854.23145
5 81290.51563 0.508186 -19645.32227 -1367.611206 13924.96094
Domain: c1...
Time
Active Power
[W]
Apparent Power
[VA]
Magnetic Energy
[J]
Induced Current.
Real [A]
Induced Current.
Imaginary [A]
Voltage.Real
[V]
Voltage.Imaginary
[V]
Voltage.RMS
[V]
1 20850.89063 1520770.125 0.181283 0 0 -58.7896 -757.998596 537.673401
2 20849.83984 1520279.25 0.181287 0 0 -58.460293 -757.779663 537.499817
3 20842.77148 1513710.25 0.181333 0 0 -56.267925 -754.66272 535.177368
4 20847.58203 1505146.75 0.181467 0 0 -53.881233 -750.556274 532.14978
5 20849.69141 1500635.5 0.181523 0 0 -51.355831 -748.482727 530.554749

About
CENOS was developed by a team of experienced PhDs, engineers and software developers with a simple vision
of bringing sharing economy to the engineering world, saving engineers time and accelerating innovations.
Visit our site to learn more: www.cenos-platform.com
16
Dr. phys. Mihails Scepanskis
CEO and co-founder of CENOS LLC
10+ years of scientific and
engineering career, former
researcher at Argonne National
Laboratory and University of
Latvia, 19 peer-reviewed
publications
Dr. phys. Vadims Geza
Chief Scientist at CENOS LLC
10+ years in induction heating,
former researcher at Leibnitz
University of Hanover, simulation
expert in numerous industrial
projects

1. The applicant Zhang Chengyang is applying for a 6-credit conservation research grant from September to May to build a thermal model and power-limiting system to control the temperature of an electrical vehicle motor. 2. The project aims to build a thermal model through simulation and experiments to estimate the temperature of critical motor components, develop a power-limiting system to control torque based on temperature, and verify the model and system with experiments. 3. The experiments will use sensors to measure the temperature of a 1.5kW induction motor powered by a variable speed drive under different loads from a fan, compare estimated and actual temperatures, and test performance with and without the power-limiting control.

Modeling and Optimization of Cold Crucible Furnaces for Melting Metals

Fluxtrol Inc.

http://fluxtrol.com Cold Crucible Furnaces (CCFs), widely used in multiple special applications of melting metals, oxides, glasses and other materials [1], are essentially 3D devices and their modeling is a complicated task. Multiple studies of CCFs have been made for their optimization, but their electrical efficiency is still low; for metals approximately 25-30% andeven lower. Fluxtrol, Inc., made an extensive study of electromagnetic processes of CCFs using computer simulation and laboratory tests. This study showed that electrical efficiency of CCFs may be strongly improved by means of optimal design of the whole system with use of magnetic flux controllers. Theoretical results had been confirmed by laboratory tests on mockups and by industrial tests with real melting processes. The presentation contains a description of the computer modeling procedure and major findings. They form a basis for optimal design of electromagnetic systems of CCFs.

Presentation fwt en

Yuri Shevchenko

This document discusses wind energy production in Ukraine. It details the production facilities of Fuhrlander AG, including workshops and warehouses for manufacturing wind turbine components. It then provides specifications for the FL2500 2.5MW wind turbine model, such as its 98.2m height, 100m rotor diameter, and operational temperature range. Finally, it outlines the logistics and service support for wind turbines in Ukraine, including transportation of parts, erection of turbines, service staff levels by region, spare parts warehouses, and dispatching offices that monitor wind parks.

Mathematical modelling of steam turbine

ssusera970cc

- The document discusses the mathematical modeling of a steam turbine unit. It describes how steam turbines work by converting the high pressure and temperature steam into rotational energy via multiple turbine stages. - It presents the equations used to model the steam turbine as a transfer function based on the continuity equation and assumptions about steam flow and density relationships. The turbine torque is also modeled as proportional to the steam flow rate. - Block diagrams show the typical multi-stage configuration of a steam turbine with high, intermediate, and low pressure sections, each modeled as first-order lag systems.

Links to ansys_for_website

hunterbevanrg

Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to allow for detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and multi-physics tools like ANSYS and Icepak are being developed to simplify and accelerate integrated magnetic, thermal, and stress analysis calculations.

Low Frequency Electromagnetics Training with ANSYS Maxwell

SIMTEC Software and Services

This document outlines a tentative training agenda for an ANSYS Maxwell introduction training taking place in Zagreb, May 2019. The agenda includes 7 lectures covering topics such as Maxwell magnetostatics, electrostatics, eddy currents, magnetic transients, parametric analysis, and multiphysics simulations. Each lecture is accompanied by a hands-on workshop applying the concepts to examples such as calculating force, capacitance, magnetic fields at different frequencies, rotational motion in an actuator, parametric analysis of a coil and slug, and electromagnetic-mechanical coupling.

Electromagnetics and Electronics Simulation Training Agenda

SIMTEC Software and Services

This document outlines the tentative agendas for three introductory training sessions on electronics and electromagnetics simulation using ANSYS software: SIwave, HFSS, and Maxwell. Each session includes morning and afternoon blocks with lectures and workshops covering various simulation topics like import processes, s-parameters, impedance profiles, signal integrity, electromagnetic interference, eigenmodes, meshing, optimization, transient analysis, magnetostatics, electrostatics, eddy currents, magnetic transients, parametric analysis, and multiphysics coupling. Coffee breaks separate the morning and afternoon portions.

Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to enable detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and ANSYS multi-physics software simplify and expedite complex motor design simulations and analysis.

Mini scada system for monitoring pv and wind installation in meteorology stat...

slmnsvn

This thesis project involves developing a system to monitor the operation of photovoltaic (PV) power stations. The key objectives are to provide real-time monitoring of plant status, enable supervision and control of plant operations, serve as a maintenance tool, and provide easy data visualization dashboards. The methodology will involve designing and building a system to monitor metrics like array voltage, current, power, module temperature, ambient temperature, irradiance, and irradiation from the PV stations. It will also include alarms to detect any faults with the solar cells. Important aspects that should be covered include elements of PV systems, controlling and monitoring PV performance, and evaluating results.

Mini scada system for monitoring pv and wind installation in meteorology stat...

slmnsvn

This document presents a mini SCADA system for monitoring PV and wind installations in meteorology stations. It describes the methodology used, including sensors to measure temperature, wind speed and direction, humidity, atmospheric pressure and more. It also covers calculations for wind turbine output power based on speed and area, and solar panel output based on load, penetration factor, and panel specifications. MATLAB programs were designed to calculate wind and solar output. Problems faced included a lack of equipment and long shipping times.

Spin Seminario L'Aquila

Spin Applicazioni Magnetiche

This document outlines an automatic procedure for designing and analyzing electric traction motors through multi-disciplinary analysis. It describes performing initial sizing and sensitivity analysis to explore different motor configurations. Key analyses include computing various loss mechanisms like AC proximity losses, investigating short circuits and demagnetization, verifying mechanical strength, and performing advanced thermal and vibration analyses. The goal is to optimize the motor design through this process to reduce losses, vibrations, and noise while ensuring adequate life, reliability, and performance.

23 presentation kenny supsi mar17

Sandia National Laboratories: Energy & Climate: Renewables

The document discusses methods for characterizing PV module performance under different light intensities (irradiances) and temperatures according to IEC 61853-1 standards. It describes indoor testing methods using solar simulators with mesh filters or masks to vary irradiance levels, as well as outdoor methods using a tracker with mesh filters or fixed installation. Results showed agreement within 3% between indoor and outdoor measurements and less than 5% deviation for fixed outdoor installation. Mesh filtering techniques showed promise but have limitations at low irradiances.

04 winter(ptb), status and outlook of photo class

Sandia National Laboratories: Energy & Climate: Renewables

E funda general information on element iron

ENDEAVOUR INTERNATIONAL

Iron is the 26th element with an atomic number of 26 and atomic weight of 55.845. It has a density of 7870 kg/m3 as a solid and a melting temperature of 1811.15 K and boiling temperature of 3134.15 K. Some key mechanical properties of solid iron include a modulus of elasticity of 193.053 GPa and a Poisson's ratio of 0.29. Thermally, iron has a thermal expansion coefficient of 1.180/K as a solid and a heat capacity of 449 J/kg-K at 298.15 K.

What's possible with CENOS induction heating simulation?

Martins Vilums

Simulation allows for modeling of complex heating processes including: - Scanning motions and controlled heating of workpieces - Rotational motions and calculation of induced currents at high frequencies - Optimization of choke designs and materials properties Results of simulations include: - Visualization of hardened zones and temperature distributions over time - Statistics on energy usage and component properties like inductor inductance

Three phase BLDC motor

Anoop S

Final Evaluation

Shahroz Ali

Parabolic dish solar concentrator systems were designed, fabricated, and tested at varying concentration ratios to investigate their performance. The concentrators had diameters of 0.9m and focal lengths of 1.02m. Testing was conducted at concentration ratios of 10.38, 20.76, and 31.15 using 1, 2, and 3 concentrators respectively. Higher concentration ratios resulted in shorter times to achieve steam production and higher steam pressures. Concentration ratios of 20.76 produced steam in under 30 minutes, with pressures up to 1.9 bars. Overall, increasing the concentration ratio improved the thermal efficiency and steam output of the parabolic dish concentrator system.

3.-Invar.pdf

Nafir Anas

This document describes two types of high ampacity conductors: STACIR and STACIR/TW. STACIR conductors have an inner core of aluminum-clad invar steel surrounded by a layer of super thermal resistant aluminum alloy wires. STACIR/TW conductors have a similar design but with the aluminum alloy wires arranged in two layers separated by invar steel wires. Tables provide the specifications for various conductor sizes, including their construction, dimensions, weight, current capacity, and mechanical strength. These conductors can operate at higher temperatures than conventional conductors, carrying more than 100% greater current.

ABB POLIM-S..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

Shape memory alloy (ni tinol)

sandeshdhurve

This document presents research on rapid manufacturing of nitinol shape memory alloy (SMA) springs using lasers. It discusses depositing ni-ti powder on titanium plates using high-power laser deposition to manufacture leaf springs. CAD models were created of a parallel manipulator using SMA helical and leaf springs. Analysis using ANSYS studied the actuation behavior of the SMA springs with respect to temperature changes and the parallel manipulator's 3-DOF movement. Results showed the springs deflecting under applied forces and temperature changes according to SMA material properties.

Refrigeration cycle ppt by iit Delhi faculty

netekob911

This document discusses refrigeration systems, including theoretical and field refrigeration cycles. It analyzes the ideal vapor compression refrigeration (VCR) cycle by examining refrigerant flow rate, compressor power consumption, and coefficient of performance (COP) under varying conditions. Tables show properties like temperature, pressure, density and viscosity at different altitudes according to the standard atmosphere. It also covers cooling loads on aircrafts and using engine bleed air for aircraft refrigeration systems.

ABB MWK High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

Thorne & Derrick International

Magnetic circuit experiment 1

Karimi LordRamza

The document summarizes an experiment on magnetic circuits. The objectives are to obtain the B-H curve for a transformer and determine total magnetic flux. The experiment involves building magnetic circuits with transformers and measuring voltage, current and flux values. Magnetic circuit theory is described involving analogies to electrical circuits such as Ohm's law, Kirchhoff's laws and applying techniques like mesh and nodal analysis to solve complex magnetic circuits. Results tables show magnetic field and flux measurements for the transformer circuits.

ABB MWD High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

Thorne & Derrick International

ABB POLIM-I..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

3nd presentation

Project Guru

The document summarizes the objectives, assumptions, and analysis methodology for a project studying the seismic response of multi-story reinforced concrete flat slab structures with varying plan aspect ratios and slenderness ratios. The objectives are to calculate seismic design forces, study responses in seismic zone IV, determine safe aspect and slenderness ratios, and perform analysis using ETABS. Models are defined for 5 groups of aspect ratios from 1 to 5 and slenderness ratios ranging from 0.48 to 3.32 over 3 to 11 story buildings. Response spectrum analysis is used to analyze sample structures and modal periods, frequencies, and participation factors are presented.

ABB POLIM-H..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

Atmosphere: Properties and Standard Atmosphere | Flight Mechanics | GATE Aero...

Age of Aerospace

For Video Lecture of this presentation: https://youtu.be/DqaoNt0LoIE The topics covered in this session are, Properties of Atmosphere, International Standard Atmosphere (ISA) definition and derivation, ISA Chart. The formula for obtaining ISA Chartar completely derived from basic equations. Attention! "Gate Aerospace Engineering aspirants", A virtual guide for gate aerospace engineering is provided in "Age of Aerospace" blog for helping you meticulously prepare for gate examination. Respective notes of individual subjects are provided as 'Embedded Google Docs' which are frequently updated. This comprehensive guide is intended to efficiently serve as an extensive collection of online resources for "GATE Aerospace Engineering" which can be accessed free of cost. Use the following link to access the study material https://ageofaerospace.blogspot.com/p/gate-aerospace.html

Inverted Energy: Diesel Generator Set Replacement

Inverted2019

We built Inverted Energy to be a facilitator in the global shift towards future mobility and energy storage. With a mission to accelerate the world's transition to sustainable energy, we have developed commercially advanced clean energy technologies, promotion sustainability by working with organisations in building energy storage projects with innovative technologies to move India forward. With the rising cost of fuel and levels of pollution, diesel generator sets are no longer a viable option. However, once combined with energy storage - it can become a cost effective option and also contribute to a clean environment. We aim to democratise energy access through innovation in energy storage technology. #GoBeyond the Ordinary

What's hot

Links between Motor-CAD and ANSYS

Bhavik Shah

Motor-CAD can automatically transfer geometry, material properties, excitations, and boundary conditions to Maxwell for electromagnetic analysis. Electromagnetic results from Maxwell can be imported into Motor-CAD for efficiency mapping and thermal analysis over duty cycles. Motor-CAD geometry can also be exported to ANSYS Workbench and CFD tools like Fluent to enable detailed flow and heat transfer modeling to validate and calibrate Motor-CAD's convection formulations. Links between Motor-CAD and ANSYS multi-physics software simplify and expedite complex motor design simulations and analysis.

Mini scada system for monitoring pv and wind installation in meteorology stat...

slmnsvn

Mini scada system for monitoring pv and wind installation in meteorology stat...

slmnsvn

Spin Seminario L'Aquila

Spin Applicazioni Magnetiche

23 presentation kenny supsi mar17

Sandia National Laboratories: Energy & Climate: Renewables

04 winter(ptb), status and outlook of photo class

Sandia National Laboratories: Energy & Climate: Renewables

E funda general information on element iron

ENDEAVOUR INTERNATIONAL

What's hot (7)

Links between Motor-CAD and ANSYS

Mini scada system for monitoring pv and wind installation in meteorology stat...

Spin Seminario L'Aquila

23 presentation kenny supsi mar17

04 winter(ptb), status and outlook of photo class

E funda general information on element iron

Similar to What's possible with CENOS Platform?

What's possible with CENOS induction heating simulation?

Martins Vilums

Three phase BLDC motor

Anoop S

Final Evaluation

Shahroz Ali

3.-Invar.pdf

Nafir Anas

ABB POLIM-S..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

Shape memory alloy (ni tinol)

sandeshdhurve

Refrigeration cycle ppt by iit Delhi faculty

netekob911

ABB MWK High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

Thorne & Derrick International

Magnetic circuit experiment 1

Karimi LordRamza

ABB MWD High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

Thorne & Derrick International

ABB POLIM-I..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

3nd presentation

Project Guru

ABB POLIM-H..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Thorne & Derrick International

Atmosphere: Properties and Standard Atmosphere | Flight Mechanics | GATE Aero...

Age of Aerospace

Inverted Energy: Diesel Generator Set Replacement

Inverted2019

Thermal Dynomamoter Study

Sean Clark

Electric discharge machining with analysis of variance

PBR VITS

Virtualmech energy CSP presentation

César Hoyos Martín

This document summarizes the services of a technology-focused company that provides computational mechanics and simulation tools. They offer modeling, simulation, analysis, optimization and evaluation across various technical areas including multiphysics simulation, multibody dynamics, and total design. Their methodology uses commercial and research simulation packages along with custom software development. They can help companies with product design, validation, independent engineering and operational improvements through simulation.

Energy conservation Activites of thermal power plant

MANOJ KUMAR MAHARANA

This document provides an analysis of energy usage at a power plant and recommendations for improving energy efficiency. It analyzes key performance metrics like turbine heat rate and auxiliary power consumption. It then provides several recommendations in areas like standardizing maintenance practices, improving boiler efficiency, reducing steam leakages, adopting new technologies like VFDs, managing reactive power, and reducing lighting consumption. Specific examples estimate energy and cost savings from installing VFDs on fans and replacing lighting with more efficient bulbs. The goal is to standardize operations and maintenance to maximize the efficiency and output of existing equipment.

Water Power FDR Presentation

Nicholas Clements

This document describes the design and testing of a hydroelectric generator that harnesses energy from water pressure in city pipes. It discusses two housing designs tested, as well as scaled turbine and generator designs. Test data shows the scroll housing design produced more consistent power. Optimization of gap distance, resistance, and flow rate helped maximize power output of up to 2.3 Watts. Further development ideas include testing at higher flow rates and improving resistance dynamics. The project aims to extract usable electricity from domestic water systems without interrupting service or requiring maintenance.

Similar to What's possible with CENOS Platform? (20)

What's possible with CENOS induction heating simulation?

Three phase BLDC motor

Final Evaluation

3.-Invar.pdf

ABB POLIM-S..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Shape memory alloy (ni tinol)

Refrigeration cycle ppt by iit Delhi faculty

ABB MWK High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

Magnetic circuit experiment 1

ABB MWD High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Pr...

ABB POLIM-I..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

3nd presentation

ABB POLIM-H..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arreste...

Atmosphere: Properties and Standard Atmosphere | Flight Mechanics | GATE Aero...

Inverted Energy: Diesel Generator Set Replacement

Thermal Dynomamoter Study

Electric discharge machining with analysis of variance

Virtualmech energy CSP presentation

Energy conservation Activites of thermal power plant

Water Power FDR Presentation

Recently uploaded

Casting-Defect-inSlab continuous casting.pdf

zubairahmad848137

basic-wireline-operations-course-mahmoud-f-radwan.pdf

NidhalKahouli2

Computational Engineering IITH Presentation

co23btech11018

Manufacturing Process of molasses based distillery ppt.pptx

Madan Karki

CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT

jpsjournal1

The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been referred to as the "New Great Game." This research centres on the power struggle, considering geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil politics, and conventional and nontraditional security are all explored and explained by the researcher. Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role in Central Asia. This study adheres to the empirical epistemological method and has taken care of objectivity. This study analyze primary and secondary research documents critically to elaborate role of china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade, pipeline politics, and winning states, according to this study, thanks to important instruments like the Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study, China is seeing significant success in commerce, pipeline politics, and gaining influence on other governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai Cooperation Organisation and the Belt and Road Economic Initiative.

22CYT12-Unit-V-E Waste and its Management.ppt

KrishnaveniKrishnara1

Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...

IJECEIAES

Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network

Heat Resistant Concrete Presentation ppt

mamunhossenbd75

Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt

KrishnaveniKrishnara1

Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications. Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.

学校原版美国波士顿大学毕业证学历学位证书原版一模一样

171ticu

原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700 留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才

KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions

Victor Morales

Properties Railway Sleepers and Test.pptx

MDSABBIROJJAMANPAYEL

Comparative analysis between traditional aquaponics and reconstructed aquapon...

bijceesjournal

The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.

Recycled Concrete Aggregate in Construction Part II

Aditya Rajan Patra

Engine Lubrication performance System.pdf

mamamaam477

DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL

gerogepatton

As digital technology becomes more deeply embedded in power systems, protecting the communication networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3) represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities. Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network (CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to train and test our model. The results of our experiments show that our CNN-LSTM method is much better at finding smart grid intrusions than other deep learning algorithms used for classification. In addition, our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection accuracy rate of 99.50%.

International Conference on NLP, Artificial Intelligence, Machine Learning an...

gerogepatton

International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.

132/33KV substation case study Presentation

kandramariana6

Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...

IJECEIAES

Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to precisely delineate tumor boundaries from magnetic resonance imaging (MRI) scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The model is rigorously trained and evaluated, exhibiting remarkable performance metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical image analysis and enhance healthcare outcomes. This research paves the way for future exploration and optimization of advanced CNN models in medical imaging, emphasizing addressing false positives and resource efficiency.

ML Based Model for NIDS MSc Updated Presentation.v2.pptx

JamalHussainArman

Recently uploaded (20)

Casting-Defect-inSlab continuous casting.pdf

basic-wireline-operations-course-mahmoud-f-radwan.pdf

Computational Engineering IITH Presentation

Manufacturing Process of molasses based distillery ppt.pptx

CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT

22CYT12-Unit-V-E Waste and its Management.ppt

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...

Heat Resistant Concrete Presentation ppt

Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt

学校原版美国波士顿大学毕业证学历学位证书原版一模一样

KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions

Properties Railway Sleepers and Test.pptx

Comparative analysis between traditional aquaponics and reconstructed aquapon...

Recycled Concrete Aggregate in Construction Part II

Engine Lubrication performance System.pdf

DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL

International Conference on NLP, Artificial Intelligence, Machine Learning an...

132/33KV substation case study Presentation

Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...

ML Based Model for NIDS MSc Updated Presentation.v2.pptx

What's possible with CENOS Platform?

1. Possibilities with CENOS Platform simulation Applications, Physical control, Results

2. What is simulation? 2

3. Contents 3 Applications Physical control Results

4. 1. Scanning 4 • Simple and complex motion • Controllable velocity • Complex workpiece hardening

5. 5 • Uniform heating • Fast calculation for axial-symmetric geometries • Rad/s control 2. Rotation

6. 6 • Fast HF (300 kHz to multiple MHz) case calculation • Precise JH estimation at high frequencies • Current density distribution 3. HF Simulation

7. 7 • Choke heating • Link structure improvements 4. DC link choke (DC line choke)

8. 8 • Adjustable geometry • Optimal parameter solutions • Overnight sequence running 5. Design optimization

9. 9 Physical control

10. 10 • Constant and dynamic parameters • Current (amplitude) control • Voltage control • Frequency control 1. Power control

11. 11 • Carbon steels • Magnetic steels • Temperature dependent properties • Customizable materials • Extensive material library 2. Materials

12. 12 Results

13. 13 • Hardening profile filters • 2D/3D hardened zone visualization 1. Hardened profile

14. 14 • Temperature at point • Temperature over line • Time dependent plots 2. Temperature dynamics

15. 15 • Generator power requirements • Inductor inductance 3. Energy statistics Domain: workpiece Time Active Power [W] Magnetic Energy [J] Induced Current.Real [A] Induced Current. Imaginary [A] Induced Current. RMS [A] 1 169689.3906 0.984987 -19308.6582 -1590.401489 13699.51953 2 95613.51563 0.934306 -19272.01758 -1578.540894 13673.01074 3 91314.07031 0.784908 -19281.50391 -1543.946655 13677.72266 4 86741.70313 0.661708 -19536.25391 -1488.04248 13854.23145 5 81290.51563 0.508186 -19645.32227 -1367.611206 13924.96094 Domain: c1... Time Active Power [W] Apparent Power [VA] Magnetic Energy [J] Induced Current. Real [A] Induced Current. Imaginary [A] Voltage.Real [V] Voltage.Imaginary [V] Voltage.RMS [V] 1 20850.89063 1520770.125 0.181283 0 0 -58.7896 -757.998596 537.673401 2 20849.83984 1520279.25 0.181287 0 0 -58.460293 -757.779663 537.499817 3 20842.77148 1513710.25 0.181333 0 0 -56.267925 -754.66272 535.177368 4 20847.58203 1505146.75 0.181467 0 0 -53.881233 -750.556274 532.14978 5 20849.69141 1500635.5 0.181523 0 0 -51.355831 -748.482727 530.554749

16. About CENOS was developed by a team of experienced PhDs, engineers and software developers with a simple vision of bringing sharing economy to the engineering world, saving engineers time and accelerating innovations. Visit our site to learn more: www.cenos-platform.com 16 Dr. phys. Mihails Scepanskis CEO and co-founder of CENOS LLC 10+ years of scientific and engineering career, former researcher at Argonne National Laboratory and University of Latvia, 19 peer-reviewed publications Dr. phys. Vadims Geza Chief Scientist at CENOS LLC 10+ years in induction heating, former researcher at Leibnitz University of Hanover, simulation expert in numerous industrial projects

17. www.cenos-platform.com

What's possible with CENOS Platform?

Recommended

Recommended

More Related Content

What's hot

What's hot (7)

Similar to What's possible with CENOS Platform?

Similar to What's possible with CENOS Platform? (20)

Recently uploaded

Recently uploaded (20)

What's possible with CENOS Platform?