Presentation fwt en
•Download as PPTX, PDF•
0 likes•702 views
This document discusses wind energy production in Ukraine. It details the production facilities of Fuhrlander AG, including workshops and warehouses for manufacturing wind turbine components. It then provides specifications for the FL2500 2.5MW wind turbine model, such as its 98.2m height, 100m rotor diameter, and operational temperature range. Finally, it outlines the logistics and service support for wind turbines in Ukraine, including transportation of parts, erection of turbines, service staff levels by region, spare parts warehouses, and dispatching offices that monitor wind parks.
Report
Share
Report
Share
Recommended
What's possible with CENOS Platform?
CENOS Platform - a simple 3D simulation desktop software for induction heating. Our platform connects the best of community-backed open source tools into one seamless user experience with simple interface for induction heating and hardening applications: - induction coil heating
- single-shot hardening
- scanning heating
- high frequency heating (surface impedance)
- DC applications.
CNC Tool Health Assessment @2019 PyCon
設備連網是工業4.0重要的一環，設備連網後我們如何讀得懂設備的語言?面對大量的高頻數據如何處理?怎麼將數據應用在工業現場?這次的演講將為大家介紹如何使用Python實作上述的課題，以CNC為範例，利用信號處理方法解析高低頻數據，並比較Supervised、Unsupervised方法的應用等，同時分享sample code。
58517990 estimating-resi-building
This document provides an estimate of construction costs for residential buildings of different sizes and structures. It gives material and labor rates to estimate costs for single-story and double-story load-bearing structures from 30-300 square meters. Specific costs are given for a 75 square meter single-story building and an 80 square meter building. Construction costs include estimates for materials like bricks, cement, sand, aggregates, as well as labor costs for masons, carpenters, painters and other workers. Additional costs are allotted for water supply, plumbing, drains and electrical wiring. Total construction costs per square foot are provided.
Why solar...???
1. The document analyzes the monthly electricity consumption of small, heavy, and total loads for a home over one year.
2. It finds that small loads like fans consume less power but are used more, while heavy loads consume more power but are used less.
3. Putting the small loads on a solar energy system and keeping the heavy loads powered by the grid could save a significant amount on the home's annual electricity bills.
Engage with...Nema
With over 60 years experience operating across the aerospace and defence industries, NEMA Ltd is at the forefront of the design and manufacture of high speed motors/generators. With its aerospace standard AS 9100 accreditation, NEMA designs, develops, manufactures, repairs and overhauls Electric Motors, Electro-Mechanical Assemblies and components including springs and pressings.
In this webinar, recorded in June 2021, the NEMA team share more about how they:
- develop technology for blue chip aerospace companies, holding customer specific quality approvals including: Airbus UK, Heroux Devtek, BAE Systems, GE Aviation Systems, AIM Aviation, UTC Aerospace, Martin Baker, Hawker Beechcraft, & Leonardo
- have established partnerships with leading academic institutions, including the University of Nottingham & Newcastle University, on UK and European funded initiatives aimed at reducing aircraft emissions
- see potential opportunities for collaboration within the PEMD community in the future
GE Small Scale Lng solutions
This document discusses small to mid-scale liquefied natural gas (LNG) solutions using modular designs. It provides throughput capacities for various standard LNG plant sizes ranging from 0.25 to 2.0 million metric tons per annum. The modular designs allow for simplified, reduced risk installation. Standard modules include gas processing equipment, liquefaction systems, control systems, and utilities.
Recommended
What's possible with CENOS Platform?
CENOS Platform - a simple 3D simulation desktop software for induction heating. Our platform connects the best of community-backed open source tools into one seamless user experience with simple interface for induction heating and hardening applications: - induction coil heating
- single-shot hardening
- scanning heating
- high frequency heating (surface impedance)
- DC applications.
CNC Tool Health Assessment @2019 PyCon
設備連網是工業4.0重要的一環，設備連網後我們如何讀得懂設備的語言?面對大量的高頻數據如何處理?怎麼將數據應用在工業現場?這次的演講將為大家介紹如何使用Python實作上述的課題，以CNC為範例，利用信號處理方法解析高低頻數據，並比較Supervised、Unsupervised方法的應用等，同時分享sample code。
58517990 estimating-resi-building
This document provides an estimate of construction costs for residential buildings of different sizes and structures. It gives material and labor rates to estimate costs for single-story and double-story load-bearing structures from 30-300 square meters. Specific costs are given for a 75 square meter single-story building and an 80 square meter building. Construction costs include estimates for materials like bricks, cement, sand, aggregates, as well as labor costs for masons, carpenters, painters and other workers. Additional costs are allotted for water supply, plumbing, drains and electrical wiring. Total construction costs per square foot are provided.
Why solar...???
1. The document analyzes the monthly electricity consumption of small, heavy, and total loads for a home over one year.
2. It finds that small loads like fans consume less power but are used more, while heavy loads consume more power but are used less.
3. Putting the small loads on a solar energy system and keeping the heavy loads powered by the grid could save a significant amount on the home's annual electricity bills.
Engage with...Nema
With over 60 years experience operating across the aerospace and defence industries, NEMA Ltd is at the forefront of the design and manufacture of high speed motors/generators. With its aerospace standard AS 9100 accreditation, NEMA designs, develops, manufactures, repairs and overhauls Electric Motors, Electro-Mechanical Assemblies and components including springs and pressings.
In this webinar, recorded in June 2021, the NEMA team share more about how they:
- develop technology for blue chip aerospace companies, holding customer specific quality approvals including: Airbus UK, Heroux Devtek, BAE Systems, GE Aviation Systems, AIM Aviation, UTC Aerospace, Martin Baker, Hawker Beechcraft, & Leonardo
- have established partnerships with leading academic institutions, including the University of Nottingham & Newcastle University, on UK and European funded initiatives aimed at reducing aircraft emissions
- see potential opportunities for collaboration within the PEMD community in the future
GE Small Scale Lng solutions
This document discusses small to mid-scale liquefied natural gas (LNG) solutions using modular designs. It provides throughput capacities for various standard LNG plant sizes ranging from 0.25 to 2.0 million metric tons per annum. The modular designs allow for simplified, reduced risk installation. Standard modules include gas processing equipment, liquefaction systems, control systems, and utilities.
Capacity building 2010 day 1 wind energy in morocco
The document discusses wind energy potential and development in Morocco. It notes that Morocco has excellent wind resources along its northern and southern coasts, with average wind speeds between 7.5-11 m/s. Key points include Morocco's large wind energy potential of 7936 TWh/year, the development of wind atlases and measurement stations to assess this, and feasibility studies being conducted for wind farm projects. Existing wind farms discussed include the 50 MW El Koudia El Baida farm and the 60 MW Cap Sim farm near Essaouira.
Capacity building 2010 day 1 wind energy in morocco
The document discusses wind energy potential and development in Morocco. It notes that Morocco has excellent wind resources along its northern and southern coasts, with a total potential of 7936 TWh/year. Several wind farms have been built, including a 50 MW farm in Tetouan and a 60 MW farm in Essaouira. Plans are in place to build additional large wind farms totaling 1333 MW by 2012. Successful development of wind energy requires long-term wind measurements, feasibility studies, installation and maintenance of measurement stations, and use of software to assess energy production potential.
Безпілотники
The document describes various categories of unmanned aerial vehicles (UAVs) based on their range, altitude, endurance, and weight. It then provides details on specific UAV models developed at the Research and Production Center of Unmanned Aviation "Virage" including the M-7, M-7D, M-7V5, M-10 "Eye", M-6 "Lark", and PK-07 Polikopter. Technical specifications, payload capacities, flight durations, and intended uses are given for each UAV model.
New Star Plasma Brochure
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Wind Energy Trends in Germany - Silke Luers, deutsche wind guard
Wind Energy Trends in Germany presentation bu - Silke Luers, deutsche wind guard at IEA Task 26 Cost and Value of Wind energy seminar
present_noera.ppt
This document provides information on Ansaldo Energia's facilities, products, and worldwide installed base. It has three main campuses in Italy for manufacturing gas turbines, static parts, and blades. It is a leader in steam and gas turbines, turbogenerators, and thermal and hydro power plants. As of 2009, it has over 177 GW of installed power worldwide across its gas turbines, steam turbines, hydrogenerators, and other products located in over 30 countries. The document provides breakdowns of its product lines, service portfolio, and worldwide customer reference lists.
The future of renewable energy
This document presents information on X-Wind technology, an airborne wind energy system that uses tethered kites to harness wind power. Key points:
- X-Wind plants combine well-known technologies like kites, generators, and track systems to generate electricity from wind in a more efficient manner than conventional wind turbines.
- Kites are able to fly at higher altitudes where wind speeds are greater, allowing the systems to generate power over 90% of the time compared to 10-40% for traditional wind turbines.
- Initial test flights in 2012 were successful in producing energy. The technology aims to make wind power comparable in cost to fossil fuels and provide grid stability benefits through dispatchable generation.
The future of renewable energy
This document presents information on X-Wind technology, an airborne wind energy system that uses tethered kites to harness wind power. Key points:
- X-Wind plants combine well-known technologies like kites, generators, and track systems to generate electricity from wind at higher altitudes with stronger and more consistent winds.
- The technology is 3 times more efficient than conventional wind turbines and can operate up to 90% of the time, with operational costs comparable to fossil fuels.
- A prototype plant has been in operation since 2012 at a test site in northern Germany. Market studies show the technology has potential for large-scale renewable energy production.
- Developers are seeking partners for manufacturing,
Normand Cutter
The Normand Cutter is a 127.5 meter offshore construction vessel built in Norway. It has a large 1,600 square meter working deck area rated to carry 10 tons per square meter, making it suitable for various offshore and deepwater tasks including subsea construction. The vessel is equipped with three heavy work class remotely operated underwater vehicles certified for depths up to 3,000 meters and a 300 ton active heave compensated crane for lifting operations. Propulsion is provided through a diesel-electric system with multiple engines and generators.
Mihelič - Performanse novog iverača u čišćenju rečnog korita
Međunarodno savetovanje "Šumsko inženjerstvo Jugoistočne Evrope - stanje i izazovi", 28-30. oktobar 2015, Goč, Srbija
Nordica_Spec_2016-esite pieni versio
The Nordica is a multipurpose icebreaker vessel owned by Arctia Offshore. It has a length of 116 meters and was built in 1994. It is equipped for offshore installation tasks like pipe and cable laying using its 160 tonne crane. The Nordica has excellent icebreaking capabilities due to its two azimuth thrusters powered by 15MW of electricity. It is suited for operations in polar regions and can break ice up to 1.2 meters thick.
B3 - KS ORKA: Joint Venture Kaishan China & Hugar Orka Iceland
Eirikur Bragason, CEO, KS Orka
Iceland Geothermal Conference 2018 - Breaking the Barriers
24 - 27 April, 2018, Harpa, Reykjavík
Jawaid Ahmed (1)
Jawaid Ahmed is seeking a dynamic position that provides exposure to different markets. He has over 6 years of experience as a Field Service Technician and Floor Hand. His responsibilities have included ensuring proper threading and torque of casing and tubing, operating torque monitoring systems, running various completion equipment, and assisting with rig operations. He is proficient in English and Urdu and holds certifications in rig passing and safety.
Keruigroup - Catalogo de Productos Eléctricos
Estimada red, les comparto toda la gama de productos de la división Eléctrica y Electrónica Industrial de Keruigroup. Ofrecemos financiamiento desde 60 días a 2 años. Proyectos CAPEX, OPEX a todo nivel. Si tienes otros productos que quieras traer de China en contenedores, somos los indicados con los mejores beneficios. Interesados contactarme.
Principles of wind turbines
This document provides an overview of wind turbines, including:
1. Wind turbines convert kinetic energy from wind into mechanical power via rotating blades and a shaft, which then generates electricity through a generator. Multiple wind turbines comprise a wind farm connected to electrical networks.
2. Common wind turbines have horizontal shafts, and are designed for wind speeds between 5-18 m/s at heights of 50-200 meters. Design power ranges from 2-5 MW.
3. Leading countries for wind power production are China, USA, Germany, Spain, UK, France, Italy, Sweden, Denmark, and Netherlands.
Zeroth presentation GROUP-B1,TWO WHEELER DRIVE FORKLIFT WITH SWEEPING MACHINE...
This document summarizes a project to develop a VR operated two-wheeled forklift. The objectives are to reduce human effort, make carrying loads easier, save time to increase productivity, and keep the working environment clean. The forklift will have three main parts: a two-wheel drive mechanism with individual electric motors, a fork lift mechanism to lift and move goods on pallets, and a sweeping mechanism to clean surfaces using a motor-driven shaft and chain. The expected results are reducing human effort, saving time, easy transportation of materials, and creating a cleaner working environment. The total estimated budget is 12,100 INR.
Underground Mining Technology.pptx
This document discusses trends in coal mining technology and the need for more advanced underground mining techniques. It notes that around 60% of global coal production comes from underground mines. In India, production from underground mines is declining while open-cast mining is increasing. As shallow reserves are exhausted, underground mining will need to ramp up. Current conventional underground mining techniques will not be sufficient. The document outlines some mechanized underground mining technologies already in use in India like continuous miners and longwall mining. It provides details on continuous miner packages used in India and shares AIDA's sales pitch for various proven mining technologies ready for adoption like man riding systems, telemonitoring, and active paste fill.
Nh90 brochure 2016
The NH90 is a multi-role military helicopter that can perform naval and tactical missions. It has two main versions: the NH90 NFH for naval missions like anti-submarine warfare and the NH90 TTH for tactical transport. The NH90 is designed to be deployable worldwide on ships or from land bases with capabilities like all-weather flight, aero-transportability, and amphibious operations. It utilizes advanced technologies like composite materials, fly-by-wire controls, and integrated mission systems. The NH90 is produced through a European partnership and has a global customer base conducting missions like anti-piracy, search and rescue, and troop transport.
Poster
1) The document describes a 8 MW reference wind turbine that was designed as part of an EU project to facilitate offshore wind research.
2) Key specifications of the 8 MW turbine are provided, including its power curve, thrust curve, dimensions, weights, and maximum design loads.
3) The 8 MW turbine was validated by engineers and is intended to serve as a standard reference point for research between existing 5 MW and 10 MW reference turbines.
coal mining training report
coal mining india, coal mining method, wcl ,coal ppt ,coal mining method, coal mining, coal mining india,training report, mining engineering, mining india, coal mine ,coal india
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
More Related Content
Similar to Presentation fwt en
Capacity building 2010 day 1 wind energy in morocco
The document discusses wind energy potential and development in Morocco. It notes that Morocco has excellent wind resources along its northern and southern coasts, with average wind speeds between 7.5-11 m/s. Key points include Morocco's large wind energy potential of 7936 TWh/year, the development of wind atlases and measurement stations to assess this, and feasibility studies being conducted for wind farm projects. Existing wind farms discussed include the 50 MW El Koudia El Baida farm and the 60 MW Cap Sim farm near Essaouira.
Capacity building 2010 day 1 wind energy in morocco
The document discusses wind energy potential and development in Morocco. It notes that Morocco has excellent wind resources along its northern and southern coasts, with a total potential of 7936 TWh/year. Several wind farms have been built, including a 50 MW farm in Tetouan and a 60 MW farm in Essaouira. Plans are in place to build additional large wind farms totaling 1333 MW by 2012. Successful development of wind energy requires long-term wind measurements, feasibility studies, installation and maintenance of measurement stations, and use of software to assess energy production potential.
Безпілотники
The document describes various categories of unmanned aerial vehicles (UAVs) based on their range, altitude, endurance, and weight. It then provides details on specific UAV models developed at the Research and Production Center of Unmanned Aviation "Virage" including the M-7, M-7D, M-7V5, M-10 "Eye", M-6 "Lark", and PK-07 Polikopter. Technical specifications, payload capacities, flight durations, and intended uses are given for each UAV model.
New Star Plasma Brochure
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
Wind Energy Trends in Germany - Silke Luers, deutsche wind guard
Wind Energy Trends in Germany presentation bu - Silke Luers, deutsche wind guard at IEA Task 26 Cost and Value of Wind energy seminar
present_noera.ppt
This document provides information on Ansaldo Energia's facilities, products, and worldwide installed base. It has three main campuses in Italy for manufacturing gas turbines, static parts, and blades. It is a leader in steam and gas turbines, turbogenerators, and thermal and hydro power plants. As of 2009, it has over 177 GW of installed power worldwide across its gas turbines, steam turbines, hydrogenerators, and other products located in over 30 countries. The document provides breakdowns of its product lines, service portfolio, and worldwide customer reference lists.
The future of renewable energy
This document presents information on X-Wind technology, an airborne wind energy system that uses tethered kites to harness wind power. Key points:
- X-Wind plants combine well-known technologies like kites, generators, and track systems to generate electricity from wind in a more efficient manner than conventional wind turbines.
- Kites are able to fly at higher altitudes where wind speeds are greater, allowing the systems to generate power over 90% of the time compared to 10-40% for traditional wind turbines.
- Initial test flights in 2012 were successful in producing energy. The technology aims to make wind power comparable in cost to fossil fuels and provide grid stability benefits through dispatchable generation.
The future of renewable energy
This document presents information on X-Wind technology, an airborne wind energy system that uses tethered kites to harness wind power. Key points:
- X-Wind plants combine well-known technologies like kites, generators, and track systems to generate electricity from wind at higher altitudes with stronger and more consistent winds.
- The technology is 3 times more efficient than conventional wind turbines and can operate up to 90% of the time, with operational costs comparable to fossil fuels.
- A prototype plant has been in operation since 2012 at a test site in northern Germany. Market studies show the technology has potential for large-scale renewable energy production.
- Developers are seeking partners for manufacturing,
Normand Cutter
The Normand Cutter is a 127.5 meter offshore construction vessel built in Norway. It has a large 1,600 square meter working deck area rated to carry 10 tons per square meter, making it suitable for various offshore and deepwater tasks including subsea construction. The vessel is equipped with three heavy work class remotely operated underwater vehicles certified for depths up to 3,000 meters and a 300 ton active heave compensated crane for lifting operations. Propulsion is provided through a diesel-electric system with multiple engines and generators.
Mihelič - Performanse novog iverača u čišćenju rečnog korita
Međunarodno savetovanje "Šumsko inženjerstvo Jugoistočne Evrope - stanje i izazovi", 28-30. oktobar 2015, Goč, Srbija
Nordica_Spec_2016-esite pieni versio
The Nordica is a multipurpose icebreaker vessel owned by Arctia Offshore. It has a length of 116 meters and was built in 1994. It is equipped for offshore installation tasks like pipe and cable laying using its 160 tonne crane. The Nordica has excellent icebreaking capabilities due to its two azimuth thrusters powered by 15MW of electricity. It is suited for operations in polar regions and can break ice up to 1.2 meters thick.
B3 - KS ORKA: Joint Venture Kaishan China & Hugar Orka Iceland
Eirikur Bragason, CEO, KS Orka
Iceland Geothermal Conference 2018 - Breaking the Barriers
24 - 27 April, 2018, Harpa, Reykjavík
Jawaid Ahmed (1)
Jawaid Ahmed is seeking a dynamic position that provides exposure to different markets. He has over 6 years of experience as a Field Service Technician and Floor Hand. His responsibilities have included ensuring proper threading and torque of casing and tubing, operating torque monitoring systems, running various completion equipment, and assisting with rig operations. He is proficient in English and Urdu and holds certifications in rig passing and safety.
Keruigroup - Catalogo de Productos Eléctricos
Estimada red, les comparto toda la gama de productos de la división Eléctrica y Electrónica Industrial de Keruigroup. Ofrecemos financiamiento desde 60 días a 2 años. Proyectos CAPEX, OPEX a todo nivel. Si tienes otros productos que quieras traer de China en contenedores, somos los indicados con los mejores beneficios. Interesados contactarme.
Principles of wind turbines
This document provides an overview of wind turbines, including:
1. Wind turbines convert kinetic energy from wind into mechanical power via rotating blades and a shaft, which then generates electricity through a generator. Multiple wind turbines comprise a wind farm connected to electrical networks.
2. Common wind turbines have horizontal shafts, and are designed for wind speeds between 5-18 m/s at heights of 50-200 meters. Design power ranges from 2-5 MW.
3. Leading countries for wind power production are China, USA, Germany, Spain, UK, France, Italy, Sweden, Denmark, and Netherlands.
Zeroth presentation GROUP-B1,TWO WHEELER DRIVE FORKLIFT WITH SWEEPING MACHINE...
This document summarizes a project to develop a VR operated two-wheeled forklift. The objectives are to reduce human effort, make carrying loads easier, save time to increase productivity, and keep the working environment clean. The forklift will have three main parts: a two-wheel drive mechanism with individual electric motors, a fork lift mechanism to lift and move goods on pallets, and a sweeping mechanism to clean surfaces using a motor-driven shaft and chain. The expected results are reducing human effort, saving time, easy transportation of materials, and creating a cleaner working environment. The total estimated budget is 12,100 INR.
Underground Mining Technology.pptx
This document discusses trends in coal mining technology and the need for more advanced underground mining techniques. It notes that around 60% of global coal production comes from underground mines. In India, production from underground mines is declining while open-cast mining is increasing. As shallow reserves are exhausted, underground mining will need to ramp up. Current conventional underground mining techniques will not be sufficient. The document outlines some mechanized underground mining technologies already in use in India like continuous miners and longwall mining. It provides details on continuous miner packages used in India and shares AIDA's sales pitch for various proven mining technologies ready for adoption like man riding systems, telemonitoring, and active paste fill.
Nh90 brochure 2016
The NH90 is a multi-role military helicopter that can perform naval and tactical missions. It has two main versions: the NH90 NFH for naval missions like anti-submarine warfare and the NH90 TTH for tactical transport. The NH90 is designed to be deployable worldwide on ships or from land bases with capabilities like all-weather flight, aero-transportability, and amphibious operations. It utilizes advanced technologies like composite materials, fly-by-wire controls, and integrated mission systems. The NH90 is produced through a European partnership and has a global customer base conducting missions like anti-piracy, search and rescue, and troop transport.
Poster
1) The document describes a 8 MW reference wind turbine that was designed as part of an EU project to facilitate offshore wind research.
2) Key specifications of the 8 MW turbine are provided, including its power curve, thrust curve, dimensions, weights, and maximum design loads.
3) The 8 MW turbine was validated by engineers and is intended to serve as a standard reference point for research between existing 5 MW and 10 MW reference turbines.
coal mining training report
coal mining india, coal mining method, wcl ,coal ppt ,coal mining method, coal mining, coal mining india,training report, mining engineering, mining india, coal mine ,coal india
Similar to Presentation fwt en (20)
Capacity building 2010 day 1 wind energy in morocco
Capacity building 2010 day 1 wind energy in morocco
Capacity building 2010 day 1 wind energy in morocco
Capacity building 2010 day 1 wind energy in morocco
Wind Energy Trends in Germany - Silke Luers, deutsche wind guard
Wind Energy Trends in Germany - Silke Luers, deutsche wind guard
Mihelič - Performanse novog iverača u čišćenju rečnog korita
Mihelič - Performanse novog iverača u čišćenju rečnog korita
B3 - KS ORKA: Joint Venture Kaishan China & Hugar Orka Iceland
B3 - KS ORKA: Joint Venture Kaishan China & Hugar Orka Iceland
Zeroth presentation GROUP-B1,TWO WHEELER DRIVE FORKLIFT WITH SWEEPING MACHINE...
Zeroth presentation GROUP-B1,TWO WHEELER DRIVE FORKLIFT WITH SWEEPING MACHINE...
Recently uploaded
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our desired pressure
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Recently uploaded (20)
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our d...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Presentation fwt en
- 2. World Wind Energy, GW
- 3. Fuhrlander AG and Fuhrlander windtechnolodgy in world
- 4. Wind potential map of Ukraine Average wind speed : V < 4,5 m/s V = 4,5 m/s V < 5,0 m/s V = 5,0 m/s
- 5. Production workshop Production of the nacelle : • length - 114 m • width - 24 m • area - 2736 sq.m. Production of rotor hub : • length - 30 m • width - 24 m • area - 720 sq.m. Main warehouse : • length - 18 m • width - 48 m • area - 864 sq.m. Additional warehouse : • length – 24,5 m • width - 18 m • area - 441 sq.m.
- 6. Wind turbine capacity 2,5 MW FL2500 Technical characteristics : 1. Rated power - 2500 kW. 2. Height to the rotor axis - 98,2 m. 3. Rotor diameter, – 100 m. 4. Starting wind speed - 3,5 m/s. 5. Rated wind speed - 11,5 m/s. 6. Shutdown at speed of a wind– 25 m/s. 7. Operation at t from -20°С to +40°С. 8. Sound power - 104,5±2 dBA. 9. Range of number of turns - 9,4 - 16,5 rpm. 10. Rated number of turns of a rotor - 14,4 rpm. 11. The angle of the nacelle - 5°. 12. Transfer number of a gear box - 79,2. Ø 100 m 98,2 m
- 7. Production of wind turbine FoundationTower 94,2 m Hub 34 000 kg Nacelle 95 000 kg
- 8. Blades Wind turbine capacity 2,5 MW
- 9. Logistics, freight scheme Kramatorsk Parts of wind turbines Service Transportation to the wind park Suppliers
- 10. Logistics
- 11. Logistics
- 12. Erection
- 13. Erection
- 14. Centers of service support
- 15. Service staff Composition of service staff South region: • 15 peoples (in 2012); • 33 peoples (in 2013). Eastern region: • 15 peoples (in 2012); • 35 peoples (in 2013).
- 16. Warehouse of spare parts and consumables The high-tech warehouse: • more then 300 titles of part; • consumables; • fuels and lubricants ; • crane and loading equipment.
- 17. Dispatching office Workplace Workplace Workplace Reporting Dispatcher on duty Server SQL/VPN Wind park 1 Dispatcher on duty Wind park 2 Wind park n+1