The document summarizes information about CONNEX surge arresters, which are metal-enclosed, fully insulated surge protection devices used for outdoor and offshore switchgears and transformers. The arresters contain metal oxide resistors and silicone rubber insulation, provide IP66 protection, and limit overvoltages to prevent equipment damage. Selection of an appropriate arrester requires matching its continuous operating voltage, residual voltage, and TOV characteristic to the protection levels and insulation coordination of the protected equipment.
This document provides information on high voltage current limiting fuse links type CEF-S, including:
1. An overview of CEF-S fuses and their ability to interrupt fault currents within 100ms for protection.
2. Tables with the technical specifications, dimensions, and catalog numbers for CEF-S fuses in various voltage classes.
3. Time-current characteristic curves showing pre-arcing times and maximum breaking currents.
4. A fuse selection table to determine the appropriate fuse rating for transformers of different voltages and power ratings.
This document contains technical specifications and details for solar panels and batteries. It includes the specifications of a 170 Watt monocrystalline solar panel including its dimensions, weight, electrical characteristics, and limited warranty. It also contains diagrams of solar cell components and explanations of solar cell operation. Further sections provide information on battery types including lead-acid, lithium-ion, and comparisons between chemistries. Calculations related to battery sizing are presented as well.
The document summarizes information about CONNEX surge arresters, which are metal-enclosed, fully insulated surge protection devices used for outdoor and offshore switchgears and transformers. The arresters contain metal oxide resistors and silicone rubber insulation, provide IP66 protection, and limit overvoltages to prevent equipment damage. Selection of an appropriate arrester requires matching its continuous operating voltage, residual voltage, and TOV characteristic to the protection levels and insulation coordination of the protected equipment.
This document provides information on high voltage current limiting fuse links type CEF-S, including:
1. An overview of CEF-S fuses and their ability to interrupt fault currents within 100ms for protection.
2. Tables with the technical specifications, dimensions, and catalog numbers for CEF-S fuses in various voltage classes.
3. Time-current characteristic curves showing pre-arcing times and maximum breaking currents.
4. A fuse selection table to determine the appropriate fuse rating for transformers of different voltages and power ratings.
This document contains technical specifications and details for solar panels and batteries. It includes the specifications of a 170 Watt monocrystalline solar panel including its dimensions, weight, electrical characteristics, and limited warranty. It also contains diagrams of solar cell components and explanations of solar cell operation. Further sections provide information on battery types including lead-acid, lithium-ion, and comparisons between chemistries. Calculations related to battery sizing are presented as well.
Seraphim Solar provides high-quality solar photovoltaic modules that are certified for safety, reliability, and performance. Their SRP-6PB series modules come in 260-275W sizes and have passed stringent testing requirements. Seraphim offers strong linear power output warranties up to 25 years and guarantees 97.5% of the module's nameplate power output during the initial years of use.
This document provides details about various types of circuit breakers and protective devices, including: Miniature Circuit Breaker (MCB), Molded Case Circuit Breaker (MCCB), Motor Protection Circuit Breaker (MPCB), Residual Current Circuit Breaker (RCCB), Surge Protective Device (SPD), Magnetic Contact (MC), and Over Load Relay (OLR). It lists specific models and their rated currents for each type of device.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in small spaces or areas that are difficult to access. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in difficult to access spaces. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document describes the CW Brass Gland with Integral Earth 419CE Series industrial cable gland. It is a brass cable gland suitable for steel wire armored cables. It has an outer seal that grips the cable sheath and provides weatherproof and waterproof sealing. The gland also has a three-part armor locking system and integral earth connection that complies with safety standards. It is available in various sizes to accommodate different cable diameters and configurations.
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cables providing environmental sealing, while the A2 kit is for unarmored cables providing a seal on the outer sheath. Tables provide specifications for each kit type, including materials, temperature rating, cable details, and ordering information.
This document provides specifications for a NP 100-12 12V100AH sealed lead-acid battery. The battery has a floating life of up to 8 years and capacities ranging from 75AH to 104AH depending on the discharge rate. It measures 409mm x 176mm x 225mm and weighs 30.63kg. The battery can be used for telecommunications, UPS, solar, and wind power systems. It has gelled electrolyte, ABS plastic components, and can withstand over 350 deep cycles at 100% discharge or over 2200 cycles at 30% discharge.
The document describes an E1W brass gland kit for securing cables. The kit includes a brass gland, brass earth tag, zinc plated steel locknut, and PVC shroud. It is suitable for circular steel-armored plastic or rubber sheathed cables and provides an IP66 waterproof and weatherproof seal. The kit is available in sizes ranging from 6.3mm to 75mm to accommodate different cable diameters.
This document provides specifications for various magnet yoke and coil unit configurations for an ironless synchronous motor. It includes dimensions, weights, electrical parameters like current and resistance, thermal properties, and mechanical details. Performance metrics like force, speed, and power loss are given for different motor sizes from UL3 to UL15 under various operating conditions. Approvals information and references to additional resources are also included.
This document provides information on the CW Aluminium Gland with Integral Earth 454CE Series industrial cable glands from Prysmian Cables & Systems. The glands are for aluminium wire armour cable, have an aluminium indoor/outdoor design with earth bonding connection, and grip the sheath of circular aluminium single wire armoured or plastic/rubber sheathed cables. Technical data includes IP66 rating, temperature range of -20°C to +90°C, and earth connection compliance. Details of gland and accessory sizes are also listed.
The CW integral earth gland kit provides brass cable glands and an earth bonding connection for steel wire armored cables. It is suitable for indoor and outdoor use in various climates. The kit contains glands for cable diameters ranging from 11.6mm to 99.5mm, and ensures IP66 waterproofing. The integral earth connection is rated for high fault currents up to 43.3kA.
This document provides specifications for the NP 200-12 12V200AH gelled lead-acid battery. The battery has a floating life of up to 8 years, dimensions of 523mm x 240mm x 245mm, and weighs 56.33kg. It has a charge voltage of 14.4-14.6V for cycle use and 13.6-13.8V for float use. The document also provides charts showing the battery's constant current discharge rates at various voltages and temperatures as well as its applications which include telecommunications, UPS, solar, and wind power systems.
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
This document provides an overview of electrical solutions offered by Panduit, including:
1) Cable ties in various styles, materials, and sizes for bundling, mounting, and identifying cables.
2) Cable accessories like wiring ducts, raceways, abrasion protection, and cable management products.
3) Connectors for terminals, power, and grounding applications.
4) Labeling systems, markers, and lockout/tagout safety solutions.
The document describes Panduit's extensive line of cable ties and provides charts for selecting the appropriate tie for an application based on required functions, material properties, and performance needs.
Cembre A-M range of copper tube cable lugs to terminate stranded copper conductors feature contained palms for circuit breakers with reduced space terminal blocks - the contained palm width lug allows an immediate and easier cable termination. The cable lug barrel is provided with an internal taper to ease the introduction of the conductor - Cembre copper cable lugs are annealed to guarantee optimum ductility and are tin-plated. Cembre ring tongue terminals with contained palms suit 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm and 300sqmm.
The document describes heavy duty copper tube terminals of the 2A-M series. The terminals are made from high purity copper tube and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The terminals are electrolytically tin plated to prevent atmospheric corrosion. The document also provides specifications and dimensions for various terminal sizes.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Seraphim Solar provides high-quality solar photovoltaic modules that are certified for safety, reliability, and performance. Their SRP-6PB series modules come in 260-275W sizes and have passed stringent testing requirements. Seraphim offers strong linear power output warranties up to 25 years and guarantees 97.5% of the module's nameplate power output during the initial years of use.
This document provides details about various types of circuit breakers and protective devices, including: Miniature Circuit Breaker (MCB), Molded Case Circuit Breaker (MCCB), Motor Protection Circuit Breaker (MPCB), Residual Current Circuit Breaker (RCCB), Surge Protective Device (SPD), Magnetic Contact (MC), and Over Load Relay (OLR). It lists specific models and their rated currents for each type of device.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in small spaces or areas that are difficult to access. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in difficult to access spaces. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document describes the CW Brass Gland with Integral Earth 419CE Series industrial cable gland. It is a brass cable gland suitable for steel wire armored cables. It has an outer seal that grips the cable sheath and provides weatherproof and waterproof sealing. The gland also has a three-part armor locking system and integral earth connection that complies with safety standards. It is available in various sizes to accommodate different cable diameters and configurations.
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cables providing environmental sealing, while the A2 kit is for unarmored cables providing a seal on the outer sheath. Tables provide specifications for each kit type, including materials, temperature rating, cable details, and ordering information.
This document provides specifications for a NP 100-12 12V100AH sealed lead-acid battery. The battery has a floating life of up to 8 years and capacities ranging from 75AH to 104AH depending on the discharge rate. It measures 409mm x 176mm x 225mm and weighs 30.63kg. The battery can be used for telecommunications, UPS, solar, and wind power systems. It has gelled electrolyte, ABS plastic components, and can withstand over 350 deep cycles at 100% discharge or over 2200 cycles at 30% discharge.
The document describes an E1W brass gland kit for securing cables. The kit includes a brass gland, brass earth tag, zinc plated steel locknut, and PVC shroud. It is suitable for circular steel-armored plastic or rubber sheathed cables and provides an IP66 waterproof and weatherproof seal. The kit is available in sizes ranging from 6.3mm to 75mm to accommodate different cable diameters.
This document provides specifications for various magnet yoke and coil unit configurations for an ironless synchronous motor. It includes dimensions, weights, electrical parameters like current and resistance, thermal properties, and mechanical details. Performance metrics like force, speed, and power loss are given for different motor sizes from UL3 to UL15 under various operating conditions. Approvals information and references to additional resources are also included.
This document provides information on the CW Aluminium Gland with Integral Earth 454CE Series industrial cable glands from Prysmian Cables & Systems. The glands are for aluminium wire armour cable, have an aluminium indoor/outdoor design with earth bonding connection, and grip the sheath of circular aluminium single wire armoured or plastic/rubber sheathed cables. Technical data includes IP66 rating, temperature range of -20°C to +90°C, and earth connection compliance. Details of gland and accessory sizes are also listed.
The CW integral earth gland kit provides brass cable glands and an earth bonding connection for steel wire armored cables. It is suitable for indoor and outdoor use in various climates. The kit contains glands for cable diameters ranging from 11.6mm to 99.5mm, and ensures IP66 waterproofing. The integral earth connection is rated for high fault currents up to 43.3kA.
This document provides specifications for the NP 200-12 12V200AH gelled lead-acid battery. The battery has a floating life of up to 8 years, dimensions of 523mm x 240mm x 245mm, and weighs 56.33kg. It has a charge voltage of 14.4-14.6V for cycle use and 13.6-13.8V for float use. The document also provides charts showing the battery's constant current discharge rates at various voltages and temperatures as well as its applications which include telecommunications, UPS, solar, and wind power systems.
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
This document provides an overview of electrical solutions offered by Panduit, including:
1) Cable ties in various styles, materials, and sizes for bundling, mounting, and identifying cables.
2) Cable accessories like wiring ducts, raceways, abrasion protection, and cable management products.
3) Connectors for terminals, power, and grounding applications.
4) Labeling systems, markers, and lockout/tagout safety solutions.
The document describes Panduit's extensive line of cable ties and provides charts for selecting the appropriate tie for an application based on required functions, material properties, and performance needs.
Cembre A-M range of copper tube cable lugs to terminate stranded copper conductors feature contained palms for circuit breakers with reduced space terminal blocks - the contained palm width lug allows an immediate and easier cable termination. The cable lug barrel is provided with an internal taper to ease the introduction of the conductor - Cembre copper cable lugs are annealed to guarantee optimum ductility and are tin-plated. Cembre ring tongue terminals with contained palms suit 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm and 300sqmm.
The document describes heavy duty copper tube terminals of the 2A-M series. The terminals are made from high purity copper tube and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The terminals are electrolytically tin plated to prevent atmospheric corrosion. The document also provides specifications and dimensions for various terminal sizes.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
400 Series Interface B Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface B bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
200 Series Interface A Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface A bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
The document discusses the 33/11 kV substation in Indiranagar, Lucknow. Key details include:
1) The substation receives power at 33kV from the main grid and contains transformers that step down the voltage to 11kV.
2) It has a total transformer capacity of 160MVA split between four transformers connected in parallel.
3) The substation contains equipment like circuit breakers, current transformers, lightning arrestors to monitor and regulate power flow.
4) Power is distributed from the substation through six 33kV feeders and multiple 11kV feeders to the surrounding Indiranagar area.
This document provides information on Power-plus sealed lead acid batteries for various applications. Key details include:
- The batteries have a design life of 12 years and comply with various industry standards. They come in capacities from 35AH to 230AH.
- They use absorbed glass mat (AGM) technology and have a non-spillable, valve regulated lead acid design that requires no water additions.
- Applications include telecommunications, emergency lighting, UPS systems, and solar photovoltaic systems. The document provides specifications on voltage, temperature ranges, and discharge times at different currents.
The document discusses deposition rates, electrode efficiency, and electrode weld metal recovery, which are different metrics for measuring welding consumables. Deposition rate is the rate at which weld metal is deposited, while electrode efficiency is the percentage of filler metal that is deposited. Electrode weld metal recovery allows calculating the percentage of welding consumable that will end up in the finished weld. Tables provide the weight of weld metal deposited per meter for common weld geometries like triangles and rectangles at different thicknesses.
OzLinc Industries supply a variety of buttweld, hose, clamps, fittings, valves and pipe to the Australian mining, fire fighting, infrastructure and marine industries.
This document provides current ratings and voltage drop data for various types and sizes of electric cables. It includes tables with information on:
- Current carrying capacities and voltage drops for PVC insulated cables in different installation configurations, ranging from 1.0 to 300 mm2 conductors.
- Correction factors for adjusting cable ratings based on ambient temperature.
- Ratings for flexible cords, mineral insulated cables, fire performance cables, and armored cables.
- Safety warnings for proper cable installation according to industry standards.
The tables supply electrical contractors and engineers with technical specifications for correctly sizing cables for different applications according to the latest UK wiring regulations.
The document provides information about IE4 efficiency class motors produced by CG Power and Industrial Solutions Ltd., including:
- Performance data for their Apex series motors in the IE4 efficiency class with efficiencies up to 96.7%, power factors up to 0.9, and other technical specifications.
- Descriptions of the benefits of IE4 class motors such as highest efficiencies, early payback on investment due to energy savings, and reliable operation due to lower bearing temperatures.
- Applications that would benefit from IE4 class motors including conveyor belts, presses, textile machines, pumps, fans, and mills.
This document describes two types of high ampacity conductors: STACIR and STACIR/TW. STACIR conductors have an inner core of aluminum-clad invar steel surrounded by a layer of super thermal resistant aluminum alloy wires. STACIR/TW conductors have a similar design but with the aluminum alloy wires arranged in two layers separated by invar steel wires. Tables provide the specifications for various conductor sizes, including their construction, dimensions, weight, current capacity, and mechanical strength. These conductors can operate at higher temperatures than conventional conductors, carrying more than 100% greater current.
This document provides current ratings and voltage drop data for various types and sizes of electric cables. It includes tables with information on:
- Current carrying capacities and voltage drops for PVC insulated cables in different installation configurations, ranging from 1.0 to 300 mm2 conductors.
- Correction factors for adjusting cable ratings based on ambient temperature.
- Ratings for flexible cords and mineral insulated cables.
- Notes on installation standards and conditions that affect cable performance, such as ambient temperature and grouping.
The tables are designed to help electricians select appropriately sized cables to safely carry loads in compliance with industry regulations like BS 7671.
POWER-plus PBC 2V-Series are valve regulated lead acid (VRLA) gel batteries designed for long-term backup power applications. They have a maintenance-free design with gel electrolyte technology, providing reliable performance, safety, and a design life of 20 years. The batteries have capacities ranging from 50AH to 4000AH and comply with various industry standards. They are suitable for applications including telecommunications, emergency lighting, UPS systems, and more.
The document describes a series of transient voltage suppressor (TVS) diodes called the 5KP series. The diodes are designed to protect electronic equipment from voltage transients caused by lightning or other events. They have features like fast response time, low clamping voltage, and high temperature tolerance. The document provides detailed electrical characteristics and ratings for each diode model in the 5KP series, including reverse standoff voltage, maximum clamping voltage, peak pulse current, and more. Curves show specifications for pulse power rating, derating, junction capacitance, and non-repetitive surge current.
This document provides information on Shawcor's high density polyethylene (HDPE) pressure pipe and liners. It discusses the benefits of HDPE pipe such as lower installation and lifecycle costs, corrosion and chemical resistance, and lighter weight. Tables are included that specify the dimensions, pressure ratings, and weights of various pipe sizes that are available from Shawcor in HDPE material.
The production facility covers an area of 130,000 square meters and produces butt welding pipe fittings for various industries such as petroleum, gas, and chemical. The main products include elbows, tees, reducers, and flanges in materials like carbon steel, stainless steel, and alloy steel. The annual production capacity for butt welded pipe fittings is around 70,000 tons.
This document provides specifications for different types and sizes of power cables, including their nominal dimensions, weights, current carrying capacities, and other technical specifications. It includes data on both aluminum and copper conductor cables that are either unarmored or armored, with XLPE insulation, and conform to certain industry standards. The specifications are presented in tables with the cable properties listed for various standard cable sizes ranging from 35 to 1000 square mm.
The document provides technical specifications for aluminium conductor steel-reinforced (ACSR) cables. ACSR cable consists of a solid or stranded steel core surrounded by strands of aluminium. It has high tensile strength and light weight, allowing for longer spans with fewer supports. The document lists various ACSR cable standards and sizes available according to ASTM, IEC, and Canadian standards. It provides information on cable construction, dimensions, rated strengths, resistances, weights, and maximum current carrying capacities.
This document provides information about carbon batteries produced by C&D Carbon Battery, including their features and specifications. Key points include:
- C&D carbon batteries have advantages over other batteries such as maximized deep cycle capability, minimized sulfation, and extreme temperature tolerance.
- The batteries have long cycle life, high charge acceptance, and fast recharging capability. They also have minimized total ownership costs.
- Specifications and performance curves are provided for various C&D carbon battery models, showing details like capacity, dimensions, terminals, and discharge characteristics.
Lead carbon-gen-brochure-en-1411-finalNaveed Ahmed
This document provides information about carbon batteries produced by C&D Carbon Battery, including their features and specifications. Key points include:
- C&D carbon batteries have advantages over other batteries such as maximized deep cycle capability, minimized sulfation, and extreme temperature tolerance.
- The batteries have long cycle life, high charge acceptance, and comply with various industry specifications.
- Specifications and performance curves are provided for different battery models, showing details like capacity, dimensions, terminals, and discharge characteristics.
AlumaCore Optical Ground Wire is designed to provide protection for optical fibers under rugged conditions. Its central aluminum pipe provides excellent protection for fibers from mechanical and thermal stresses. It can contain up to 144 fibers and is suitable for basic installations as well as those requiring high tensions or long spans. Features include fiber counts up to 144, exceptional protection of fibers, and good crush resistance from its thick-walled aluminum pipe.
Similar to ABB MWK High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Protection for High Voltage Cable Networks (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Climate Impact of Software Testing at Nordic Testing Days
ABB MWK High Voltage Surge Arresters AC 4kV - 44kV - AC Surge Arresters & Protection for High Voltage Cable Networks
1. Data sheet
Surge arrester
MWK
Technical data
Surge arrester with metal oxide resistors without spark
gaps (MO surge arrester), direct molded silicone housing,
grey color, designed and tested according to IEC 60099-4.
Nominal discharge current In 8/20 μs 10 kA peak
Line discharge class (LD) 2
High current impulse Ihc 4/10 μs 100 kA peak
Long duration current impulse 550 A / 2000 μs
Short circuit rating Is 50 Hz 20 kA rms for 0.2 s
Classification according to
IEEE (ANSI) C62.11 intermediate
The thermal stability of the MO surge arrester is proved in the
operating duty test according to LD 2, which gives an energy
input of 5.5 kJ/kV (Uc).
Power frequency voltage versus time characteristic (TOV)
with prior energy input
t = 1 s UTOV = 1.317 × Uc
t = 3 s UTOV = 1.287 × Uc
t = 10 s UTOV = 1.256 × Uc
Mechanical loads
Torque moment 50 Nm
Tensile strength axial 1200 N
Short term load SSL horizontal to axis 153 Nm
Long term load SLL horizontal to axis 88 Nm
General data
Ambient air temperature −60 to +40 °C (for higher values
contact manufacturer)
Altitude up to 1800 m (for higher values
contact manufacturer)
Frequency of system voltage 16.7/50/60 Hz
Weather ageing test tested according to test series A
(1000 h salt fog)
Overvoltage protection of
-Transformers
-Motors
-Cables
-Cable sheaths
-Medium voltage equipment
Application
-Alternating current (AC)
-Outdoor and indoor
4. 4 MWK | Surge arrester
Housing
Dimensions (mm)
Standard dimensions without accessories (may be subject to changes)
Dimensions according outline drawing HAWA 480785
Outline drawings with accessories on request
Structure of type designation
MWK 24
Type of arrester
Uc = Continuous operating voltage