The document summarizes information about CONNEX surge arresters, which are metal-enclosed, fully insulated surge protection devices used for outdoor and offshore switchgears and transformers. The arresters contain metal oxide resistors and silicone rubber insulation, provide IP66 protection, and limit overvoltages to prevent equipment damage. Selection of an appropriate arrester requires matching its continuous operating voltage, residual voltage, and TOV characteristic to the protection levels and insulation coordination of the protected equipment.
This document provides information on high voltage current limiting fuse links type CEF-S, including:
1. An overview of CEF-S fuses and their ability to interrupt fault currents within 100ms for protection.
2. Tables with the technical specifications, dimensions, and catalog numbers for CEF-S fuses in various voltage classes.
3. Time-current characteristic curves showing pre-arcing times and maximum breaking currents.
4. A fuse selection table to determine the appropriate fuse rating for transformers of different voltages and power ratings.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in small spaces or areas that are difficult to access. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document summarizes information about CONNEX surge arresters, which are metal-enclosed, fully insulated surge protection devices used for outdoor and offshore switchgears and transformers. The arresters contain metal oxide resistors and silicone rubber insulation, provide IP66 protection, and limit overvoltages to prevent equipment damage. Selection of an appropriate arrester requires matching its continuous operating voltage, residual voltage, and TOV characteristic to the protection levels and insulation coordination of the protected equipment.
This document provides information on high voltage current limiting fuse links type CEF-S, including:
1. An overview of CEF-S fuses and their ability to interrupt fault currents within 100ms for protection.
2. Tables with the technical specifications, dimensions, and catalog numbers for CEF-S fuses in various voltage classes.
3. Time-current characteristic curves showing pre-arcing times and maximum breaking currents.
4. A fuse selection table to determine the appropriate fuse rating for transformers of different voltages and power ratings.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in small spaces or areas that are difficult to access. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in difficult to access spaces. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
This document provides details about various types of circuit breakers and protective devices, including: Miniature Circuit Breaker (MCB), Molded Case Circuit Breaker (MCCB), Motor Protection Circuit Breaker (MPCB), Residual Current Circuit Breaker (RCCB), Surge Protective Device (SPD), Magnetic Contact (MC), and Over Load Relay (OLR). It lists specific models and their rated currents for each type of device.
This document contains technical specifications and details for solar panels and batteries. It includes the specifications of a 170 Watt monocrystalline solar panel including its dimensions, weight, electrical characteristics, and limited warranty. It also contains diagrams of solar cell components and explanations of solar cell operation. Further sections provide information on battery types including lead-acid, lithium-ion, and comparisons between chemistries. Calculations related to battery sizing are presented as well.
The document describes the CW Brass Gland with Integral Earth 419CE Series industrial cable gland. It is a brass cable gland suitable for steel wire armored cables. It has an outer seal that grips the cable sheath and provides weatherproof and waterproof sealing. The gland also has a three-part armor locking system and integral earth connection that complies with safety standards. It is available in various sizes to accommodate different cable diameters and configurations.
This document provides information on the CW Aluminium Gland with Integral Earth 454CE Series industrial cable glands from Prysmian Cables & Systems. The glands are for aluminium wire armour cable, have an aluminium indoor/outdoor design with earth bonding connection, and grip the sheath of circular aluminium single wire armoured or plastic/rubber sheathed cables. Technical data includes IP66 rating, temperature range of -20°C to +90°C, and earth connection compliance. Details of gland and accessory sizes are also listed.
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cables providing environmental sealing, while the A2 kit is for unarmored cables providing a seal on the outer sheath. Tables provide specifications for each kit type, including materials, temperature rating, cable details, and ordering information.
The CW integral earth gland kit provides brass cable glands and an earth bonding connection for steel wire armored cables. It is suitable for indoor and outdoor use in various climates. The kit contains glands for cable diameters ranging from 11.6mm to 99.5mm, and ensures IP66 waterproofing. The integral earth connection is rated for high fault currents up to 43.3kA.
1. The Vari-Cleat cable cleats are available for trefoil, single, and bundled cable applications requiring moderate short circuit withstand.
2. The cleats consist of cast aluminum bases with stainless steel over-straps and brackets, and come in different sizes and configurations to suit various cable diameters and requirements.
3. Vari-Cleats have been tested per IEC standard 61914 for properties such as withstanding lateral and axial loads, operating temperature range, impact and flame resistance, and electro-mechanical forces during short circuits.
The document describes an E1W brass gland kit for securing cables. The kit includes a brass gland, brass earth tag, zinc plated steel locknut, and PVC shroud. It is suitable for circular steel-armored plastic or rubber sheathed cables and provides an IP66 waterproof and weatherproof seal. The kit is available in sizes ranging from 6.3mm to 75mm to accommodate different cable diameters.
The document summarizes a weatherproof cable gland for use in hazardous areas. It has dual seals to provide IP66 protection and can accommodate various cable sizes. The gland kit includes components for securing and sealing cables. It is certified for use in explosive gas and dust hazardous areas when used with appropriately certified equipment.
This document provides specifications for a NP 100-12 12V100AH sealed lead-acid battery. The battery has a floating life of up to 8 years and capacities ranging from 75AH to 104AH depending on the discharge rate. It measures 409mm x 176mm x 225mm and weighs 30.63kg. The battery can be used for telecommunications, UPS, solar, and wind power systems. It has gelled electrolyte, ABS plastic components, and can withstand over 350 deep cycles at 100% discharge or over 2200 cycles at 30% discharge.
This document provides specifications for Colossus Cable Cleats. It lists various cleat models characterized by their cable capacity range in millimeters. Dimensions include width, height, depth, fixing hole diameters, and weight. Testing information indicates the cleats meet the heavy duty classification in IEC 61914 for applications from -40 to 60 degrees Celsius. Tests include withstanding lateral loads up to 14,000 Newtons, axial movement up to 9.4 Newtons, over 120 seconds of flame application, and 104kA short circuits with intermediate straps.
This document summarizes the technical specifications of the FIAMM SMG OPzV range of tubular lead-acid batteries. Key points include:
- The batteries comply with international standards including IEC, Eurobat, and DIN.
- They have tubular positive plates, immobilized electrolyte gel structure, and highly porous separators and gauntlets.
- Capacities range from 200Ah to 3000Ah with excellent cycling performance and deep discharge capability.
- Other features include minimal gassing, non-spillable containment, 18 year design life, and recyclability.
This document describes two types of high ampacity conductors: STACIR and STACIR/TW. STACIR conductors have an inner core of aluminum-clad invar steel surrounded by a layer of super thermal resistant aluminum alloy wires. STACIR/TW conductors have a similar design but with the aluminum alloy wires arranged in two layers separated by invar steel wires. Tables provide the specifications for various conductor sizes, including their construction, dimensions, weight, current capacity, and mechanical strength. These conductors can operate at higher temperatures than conventional conductors, carrying more than 100% greater current.
The document discusses deposition rates, electrode efficiency, and electrode weld metal recovery, which are different metrics for measuring welding consumables. Deposition rate is the rate at which weld metal is deposited, while electrode efficiency is the percentage of filler metal that is deposited. Electrode weld metal recovery allows calculating the percentage of welding consumable that will end up in the finished weld. Tables provide the weight of weld metal deposited per meter for common weld geometries like triangles and rectangles at different thicknesses.
This document provides information on Shawcor's high density polyethylene (HDPE) pressure pipe and liners. It discusses the benefits of HDPE pipe such as lower installation and lifecycle costs, corrosion and chemical resistance, and lighter weight. Tables are included that specify the dimensions, pressure ratings, and weights of various pipe sizes that are available from Shawcor in HDPE material.
This document provides current ratings and voltage drop data for various types and sizes of electric cables. It includes tables with information on:
- Current carrying capacities and voltage drops for PVC insulated cables in different installation configurations, ranging from 1.0 to 300 mm2 conductors.
- Correction factors for adjusting cable ratings based on ambient temperature.
- Ratings for flexible cords, mineral insulated cables, fire performance cables, and armored cables.
- Safety warnings for proper cable installation according to industry standards.
The tables supply electrical contractors and engineers with technical specifications for correctly sizing cables for different applications according to the latest UK wiring regulations.
The document describes a tubular LED light fitting called the Series 6039. It has an extremely robust design that is suitable for use as a machine light in rough conditions. It has a long service life due to the use of LEDs and is maintenance-free. It provides flicker-free light and can be mounted in difficult to access spaces. The document provides details on the technical specifications, accessories, and dimensions of the light fitting.
This document provides details about various types of circuit breakers and protective devices, including: Miniature Circuit Breaker (MCB), Molded Case Circuit Breaker (MCCB), Motor Protection Circuit Breaker (MPCB), Residual Current Circuit Breaker (RCCB), Surge Protective Device (SPD), Magnetic Contact (MC), and Over Load Relay (OLR). It lists specific models and their rated currents for each type of device.
This document contains technical specifications and details for solar panels and batteries. It includes the specifications of a 170 Watt monocrystalline solar panel including its dimensions, weight, electrical characteristics, and limited warranty. It also contains diagrams of solar cell components and explanations of solar cell operation. Further sections provide information on battery types including lead-acid, lithium-ion, and comparisons between chemistries. Calculations related to battery sizing are presented as well.
The document describes the CW Brass Gland with Integral Earth 419CE Series industrial cable gland. It is a brass cable gland suitable for steel wire armored cables. It has an outer seal that grips the cable sheath and provides weatherproof and waterproof sealing. The gland also has a three-part armor locking system and integral earth connection that complies with safety standards. It is available in various sizes to accommodate different cable diameters and configurations.
This document provides information on the CW Aluminium Gland with Integral Earth 454CE Series industrial cable glands from Prysmian Cables & Systems. The glands are for aluminium wire armour cable, have an aluminium indoor/outdoor design with earth bonding connection, and grip the sheath of circular aluminium single wire armoured or plastic/rubber sheathed cables. Technical data includes IP66 rating, temperature range of -20°C to +90°C, and earth connection compliance. Details of gland and accessory sizes are also listed.
The document discusses 3TF6 vacuum contactors from Siemens for switching motors between 335-450 kW. It provides an overview of the contactors and their compliance with IEC and EN standards. It then gives selection and ordering data for various 3TF68 and 3TF69 contactor models, including their technical specifications, operational currents, voltage ratings, auxiliary contact ratings and control supply voltages. Reversing contactors that can be supplied are also listed.
This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cables providing environmental sealing, while the A2 kit is for unarmored cables providing a seal on the outer sheath. Tables provide specifications for each kit type, including materials, temperature rating, cable details, and ordering information.
The CW integral earth gland kit provides brass cable glands and an earth bonding connection for steel wire armored cables. It is suitable for indoor and outdoor use in various climates. The kit contains glands for cable diameters ranging from 11.6mm to 99.5mm, and ensures IP66 waterproofing. The integral earth connection is rated for high fault currents up to 43.3kA.
1. The Vari-Cleat cable cleats are available for trefoil, single, and bundled cable applications requiring moderate short circuit withstand.
2. The cleats consist of cast aluminum bases with stainless steel over-straps and brackets, and come in different sizes and configurations to suit various cable diameters and requirements.
3. Vari-Cleats have been tested per IEC standard 61914 for properties such as withstanding lateral and axial loads, operating temperature range, impact and flame resistance, and electro-mechanical forces during short circuits.
The document describes an E1W brass gland kit for securing cables. The kit includes a brass gland, brass earth tag, zinc plated steel locknut, and PVC shroud. It is suitable for circular steel-armored plastic or rubber sheathed cables and provides an IP66 waterproof and weatherproof seal. The kit is available in sizes ranging from 6.3mm to 75mm to accommodate different cable diameters.
The document summarizes a weatherproof cable gland for use in hazardous areas. It has dual seals to provide IP66 protection and can accommodate various cable sizes. The gland kit includes components for securing and sealing cables. It is certified for use in explosive gas and dust hazardous areas when used with appropriately certified equipment.
This document provides specifications for a NP 100-12 12V100AH sealed lead-acid battery. The battery has a floating life of up to 8 years and capacities ranging from 75AH to 104AH depending on the discharge rate. It measures 409mm x 176mm x 225mm and weighs 30.63kg. The battery can be used for telecommunications, UPS, solar, and wind power systems. It has gelled electrolyte, ABS plastic components, and can withstand over 350 deep cycles at 100% discharge or over 2200 cycles at 30% discharge.
This document provides specifications for Colossus Cable Cleats. It lists various cleat models characterized by their cable capacity range in millimeters. Dimensions include width, height, depth, fixing hole diameters, and weight. Testing information indicates the cleats meet the heavy duty classification in IEC 61914 for applications from -40 to 60 degrees Celsius. Tests include withstanding lateral loads up to 14,000 Newtons, axial movement up to 9.4 Newtons, over 120 seconds of flame application, and 104kA short circuits with intermediate straps.
This document summarizes the technical specifications of the FIAMM SMG OPzV range of tubular lead-acid batteries. Key points include:
- The batteries comply with international standards including IEC, Eurobat, and DIN.
- They have tubular positive plates, immobilized electrolyte gel structure, and highly porous separators and gauntlets.
- Capacities range from 200Ah to 3000Ah with excellent cycling performance and deep discharge capability.
- Other features include minimal gassing, non-spillable containment, 18 year design life, and recyclability.
This document describes two types of high ampacity conductors: STACIR and STACIR/TW. STACIR conductors have an inner core of aluminum-clad invar steel surrounded by a layer of super thermal resistant aluminum alloy wires. STACIR/TW conductors have a similar design but with the aluminum alloy wires arranged in two layers separated by invar steel wires. Tables provide the specifications for various conductor sizes, including their construction, dimensions, weight, current capacity, and mechanical strength. These conductors can operate at higher temperatures than conventional conductors, carrying more than 100% greater current.
The document discusses deposition rates, electrode efficiency, and electrode weld metal recovery, which are different metrics for measuring welding consumables. Deposition rate is the rate at which weld metal is deposited, while electrode efficiency is the percentage of filler metal that is deposited. Electrode weld metal recovery allows calculating the percentage of welding consumable that will end up in the finished weld. Tables provide the weight of weld metal deposited per meter for common weld geometries like triangles and rectangles at different thicknesses.
This document provides information on Shawcor's high density polyethylene (HDPE) pressure pipe and liners. It discusses the benefits of HDPE pipe such as lower installation and lifecycle costs, corrosion and chemical resistance, and lighter weight. Tables are included that specify the dimensions, pressure ratings, and weights of various pipe sizes that are available from Shawcor in HDPE material.
This document provides current ratings and voltage drop data for various types and sizes of electric cables. It includes tables with information on:
- Current carrying capacities and voltage drops for PVC insulated cables in different installation configurations, ranging from 1.0 to 300 mm2 conductors.
- Correction factors for adjusting cable ratings based on ambient temperature.
- Ratings for flexible cords, mineral insulated cables, fire performance cables, and armored cables.
- Safety warnings for proper cable installation according to industry standards.
The tables supply electrical contractors and engineers with technical specifications for correctly sizing cables for different applications according to the latest UK wiring regulations.
The document provides technical specifications for aluminium conductor steel-reinforced (ACSR) cables. ACSR cable consists of a solid or stranded steel core surrounded by strands of aluminium. It has high tensile strength and light weight, allowing for longer spans with fewer supports. The document lists various ACSR cable standards and sizes available according to ASTM, IEC, and Canadian standards. It provides information on cable construction, dimensions, rated strengths, resistances, weights, and maximum current carrying capacities.
The production facility covers an area of 130,000 square meters and produces butt welding pipe fittings for various industries such as petroleum, gas, and chemical. The main products include elbows, tees, reducers, and flanges in materials like carbon steel, stainless steel, and alloy steel. The annual production capacity for butt welded pipe fittings is around 70,000 tons.
AlumaCore Optical Ground Wire is designed to provide protection for optical fibers under rugged conditions. Its central aluminum pipe provides excellent protection for fibers from mechanical and thermal stresses. It can contain up to 144 fibers and is suitable for basic installations as well as those requiring high tensions or long spans. Features include fiber counts up to 144, exceptional protection of fibers, and good crush resistance from its thick-walled aluminum pipe.
This document provides current ratings and voltage drop data for various types and sizes of electric cables. It includes tables with information on:
- Current carrying capacities and voltage drops for PVC insulated cables in different installation configurations, ranging from 1.0 to 300 mm2 conductors.
- Correction factors for adjusting cable ratings based on ambient temperature.
- Ratings for flexible cords and mineral insulated cables.
- Notes on installation standards and conditions that affect cable performance, such as ambient temperature and grouping.
The tables are designed to help electricians select appropriately sized cables to safely carry loads in compliance with industry regulations like BS 7671.
This document provides specifications for different types and sizes of power cables, including their nominal dimensions, weights, current carrying capacities, and other technical specifications. It includes data on both aluminum and copper conductor cables that are either unarmored or armored, with XLPE insulation, and conform to certain industry standards. The specifications are presented in tables with the cable properties listed for various standard cable sizes ranging from 35 to 1000 square mm.
This document provides specifications for wire rope, including nominal diameters ranging from 4 to 40 mm, approximate weights per 100 meters, and nominal tensile strengths and minimum breaking loads in metric tons and kilonewtons. The main applications listed are for equipment used in port loading and unloading, as well as derrick tower cranes.
Pabrik kabel terbesar di Indonesia PT. Eleq Cable Indonesia Wa: 0813-8552-1314 sebagai produsen yang menjual berbagai jenis kabel listrik di Glodok Jakarta eleqcable.com untuk semua keperluan baik industri kelistrikan juga telekomunikasi.
Ada beberapa model yang di produksi pada pabrik kabel kami demi untuk memenuhi permintaan pasar yang semakin hari semakin tinggi kebutuhannya. Perkembangan teknologi telekomunikasi membuat permintaan pabrik kabel optik eleqcable harus siap memenuhi kebutuhan tersebut. Demikian menjadi keharusan untuk merebut persaingan pasar kedepan sebagai produsen kabel kami selalu mengutamakan mutu dan kualitas terbaik yang diminta.
Pada kesempatan ini kami sebagai Pabrik kabel di Tangerang yang beralamat Kawasan Industri Manis, Jalan Manis V No. 11, kelurahan Manis Jaya Kecamatan Jatiuwung, Tangerang Banten 15136. Memberikan penawaran dari model yang ada dan produksi PT. Eleq Cable Indonesia dengan produk yang berkualitas serta memenuhi standar mutu (SNI).
This document provides information on Power-plus sealed lead acid batteries for various applications. Key details include:
- The batteries have a design life of 12 years and comply with various industry standards. They come in capacities from 35AH to 230AH.
- They use absorbed glass mat (AGM) technology and have a non-spillable, valve regulated lead acid design that requires no water additions.
- Applications include telecommunications, emergency lighting, UPS systems, and solar photovoltaic systems. The document provides specifications on voltage, temperature ranges, and discharge times at different currents.
SIBA URDC DC fuses are available for use on traction, battery and railway circuit applications - traction fuses are designed for heavy duty circuit protection to following standards UIC550, IEC60269 and VDE 0636-40.
This document provides information about solar modules and solar systems from Lubi Electronics. It describes the components of the solar modules including mono/poly-crystal silicon solar cells, bypass diodes, and anti-reflection coating. It also lists advantages like subsidies, depreciation benefits, and diesel savings. The document provides specifications for different wattage polycrystalline solar panels and details mounting structures. It highlights Lubi Electronics' manufacturing facilities, quality assurance processes, and product warranties.
Lubi Electronics - Polycrystalline Solar Modules Manufacturer & ExporterHimanshurai Sunsara
Lubi Electronics, India's leading manufacturer & exporter of the High Quality Poly-Crystalline Photovoltaic Solar Modules.
It operates state of the art 40MW turnkey line capable of manufacturing High Quality Solar Modules. Our products meet stringent Global Standards with approvals from IEC, CB and UL.
As a company we offer you services that are of the highest standard and at extremely competitive rates.
If you have any requirements of Solar Modules. Kindly send an email to - Mr. Himanshurai Sunsara
hlsunsara@lubielectronics.com
export@lubielectronics.com
This document provides technical specifications for Kabelindo NYFGBY cable. It includes details on the conductor (annealed copper wire), insulation (extruded PVC), filler (extruded PVC), armour (galvanized flat steel and tape), sheath (extruded PVC), and specifications. Dimensional data, electrical data, and technical information is provided for cable sizes ranging from 1.5 mm2 to 300 mm2.
Similar to ABB POLIM-S..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arresters & Protection for High Voltage Cable Networks (20)
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
ABB POLIM-S..N High Voltage Surge Arresters AC up to 72 kV - AC Surge Arresters & Protection for High Voltage Cable Networks
1. Data sheet
Surge arrester
POLIM-S..N
Technical data
Surge arrester with metal oxide resistors without spark gaps
(MO surge arrester), direct molded silicone housing,
grey color, designed and tested according to IEC 60099-4
Nominal discharge current In 8/20 μs 10 kA peak
Line discharge class (LD) 3
High current impulse Ihc 4/10 μs 100 kA peak
Long duration current impulse 1000 A / 2000 μs
Short circuit rating Is 50 Hz 50 kA rms for 0.2 s
Classification according to
IEEE (ANSI) C62.11 station class
The thermal stability of the MO surge arrester is proved
in the operating duty test according to LD 3, which gives
an energy input of 9,0 kJ/kV (Uc).
Power frequency voltage versus time characteristic (TOV)
with prior energy input
t = 1 s UTOV = 1.375 × Uc
t = 3 s UTOV = 1.341 × Uc
t = 10 s UTOV = 1.310 × Uc
Mechanical loads
Torque moment 100 Nm
Tensile strength axial 3000 N
Short term load SSL horizontal to axis 3840 Nm
Long term load SLL horizontal to axis 1920 Nm
Shock and vibration tested according IEC 61373.
General data
Ambient air temperature −60 to +40 °C (for higher values
contact manufacturer)
Altitude up to 1800 m (for higher values
contact manufacturer)
Frequency of system voltage 16.7/50/60 Hz
Weather ageing test tested according to test series A
(1000 h salt fog)
Overvoltage protection of
-Transformers
-Motors
-Generators
-Cables
-Cable sheaths
-Traction systems (fixed installations and rolling stock)
-Capacitors and capacitor banks
-Medium voltage equipment
Application
-Alternating current (AC)
-Outdoor and indoor
-High-speed trains
4. 4 Polim-S..N | Surge arrester
Housing
Dimensions (mm)
Standard dimensions without accessories (may be subject to changes)
Dimensions according outline drawing HAAR481762
Outline drawings with accessories on request
Structure of type designation
POLIM-S 36 N
Type of arrester
Uc = Continuous operating voltage
Housing