1. Rig #: BENNEVIS PIC Signature Approving JSA:
Welding .
Work Team (Crew Members): WELDER M032 /2012
Sequence of Basic Job Steps Potential Accidents or Hazards
Recommendation to Eliminate or Reduce Potential
Hazards
Who?
Initials
Job preparation Pre job meeting
Interference with other on-going operations Hot work permit
Fire Use only certified welding devices in perfect working
condition .Fire watcher
Electrical shock Idem above
Cutting or grinding disk breaking Use the right disk, in perfect condition, for the job to perform
Welding ,grinding, cutting Body injuries Wear of leather apron ,gloves, face shield ,ears protection
Other personnel injuries Secure grinding area
Fire Inspection and cleaning if necessary of the working area
Explosion Checks sparks will not reach flammable or fragile equipment
Fire watcher, fire extinguisher
End of job People injury, damage to equipment Clean the working area and reinstall all displaced equipment
Safety Equipment To Do This Job
Hard Hats X Cotton Gloves X Face Shield X Fire Extinguishers X
Safety Boots X Work Vest ( Goggles X Lockout/Tagout (
Safety Glasses X Safety Harness x( Barricades ( Work Permit Required X
Uncontrolled When Printed Page 1
Pyramid Drilling S.A.E
Manual Title: Personnel Safety Manual
Form Name: Job Safety Analysis
Issue Date Revision No.
3
Revision Date
9 JAN 2010
Prepared By
QA/HSE
Approved By
HM
Level No.
2
2. Uncontrolled When Printed Page 2
Pyramid Drilling S.A.E
Manual Title: Personnel Safety Manual
Form Name: Job Safety Analysis
Issue Date Revision No.
3
Revision Date
9 JAN 2010
Prepared By
QA/HSE
Approved By
HM
Level No.
2