1. me/ BENNEVIS JSA Number : MA 019 Person Approving JSA: H.M
ctivity (Job): Preloads
valves Maintenance Date Raised :
eam (Crew Members):
BE – Roustabouts Date Last Amended :
Safety Equipment To Do This Job(
Hard Hats x Cotton Gloves x Face Shield Fire Extinguishers
Safety Boots x Work Vest Goggles x Lockout/Tagout
Safety Glasses x Safety Harness Barricades Work Permit Required x
Uncontrolled When Printed Page 1 of 2
Sequence of Basic Job Steps Potential Accidents or Hazards
Recommendation to Eliminate or Reduce Potential
Hazards
Who?
Initials
1. Hold pre-job meeting – Work-permit 1. Procedures not known or not understood by crew members-
Persons involved in task becoming injured by incorrect procedure
compliance
1. Take time to read correctly JSA . Be sure everything is
understood . If not ask your Supervisor
Supervisors
2. Prepare tools & Ligths – Gas detection 2. Tools falling down in tank & on people – Wrong voltage
lighting equipment ( electric shock ) – People falling down in
tank – Poor atmospheric condition
2. Secure tools correctly before send them into preloads –
Do not stay below tools if you are inside tank – Be sure tank
is completely dry – Use 24volts lighting only – Be sure that
tank has no gas concentration before going inside
BE - ABE
Roustabouts
Electrician
3. Enter into tank – Dump-valve
maintenance
3 . Falling from ladder – Pinch point – Hand or feet injuries
when removing & reinstalling valve – Lighting problem ( no
visibility ) – Using wrong tools
3. Use fall arrestor & harness – Be sure lighting equipment is
in good condition of work – Use adequate tools – Watch
hands & feet placement during valve maintenance
BE – ABE -
Roustabouts
4. Recover tools & exit tank 4. Tools falling down – Falling from ladder – Tools left out into
the tank creating hazards
4. Use fall arrestor & harness to go out from tank – Recover
all tools when job is completed
BE – ABE -
Roustabouts
Manual Title: Personnel Safety Manual
Form Name: Job Safety Analysis
Form No.: PRIDE-02-02-102-F001
Issue Date
4th-Apr-2002
Revision No.
1
Revision Date
11-June-2006
Prepared By
QA/HSE
Approved By
FC
Level No.
2
2. Uncontrolled When Printed Page 2 of 2
Manual Title: Personnel Safety Manual
Form Name: Job Safety Analysis
Form No.: PRIDE-02-02-102-F001
Issue Date
4th-Apr-2002
Revision No.
1
Revision Date
11-June-2006
Prepared By
QA/HSE
Approved By
FC
Level No.
2
