Typical Stabilizer Chloride Management Problems
What Causes NH4Cl Salts?
Mitigating System Fouling
Operating practices
Problems with Water Injection
Design To Mitigate Salt Formation
Prevention
Remove Nitrogen from the feed
Remove chloride from stabilizer feed
Chloride Guard Bed
Caustic Injection
Water Wash
Summary
Hydrogen Compressors
Engineering Design Guide
1 SCOPE
2 PHYSICAL ROPERTIES
2.1 Data for Pure Hydrogen
2.2 Influence of Impurities
3 MATERIALS OF CONSTRUCTION
3.1 Hydrogen from Electrolytic Cells
3.2 Pure Hydrogen
4 DESIGN
4.1 Pulsation
4.2 Bypass
5 TESTING OR COMMISSIONING RECIPROCATING COMPRESSORS
6 LUBRICATION
7 LAYOUT
8 REFERENCES
FIGURES
1 MOLLIER CHART - HYDROGEN
2 COMPRESSIBILITY CHART
3 NELSON DIAGRAM
4 WATER CONTENT IN HYDROGEN FOR OIL-LUBRICATED COMPRESSORS AS GRAMM/M2 SWEPT CYLINDER AREA
Study 5: Pre-commissioning Safety Review
CONTENTS
5.0 PURPOSE
5.0.1 Team
5.0.2 Timing
5.0.3 Preparation
5.0.4 Documentation
HAZARD STUDY 5: APPLICATION
5.1 TOUR OF THE PROJECT
5.2 REVIEW OF HAZARD STUDY 5
Integration of Special Purpose Centrifugal Pumps into a ProcessGerard B. Hawkins
Integration of Special Purpose Centrifugal Pumps into a Process
CONTENTS
1 SCOPE
2 PRELIMINARY CHOICE OF PUMP
SECTION A - INLET CONDITIONS
Al Calculation of Basic Nett Positive Suction Head (NPSH)
A2 Correction to Basic NPSH for Temperature Rise at Pump Inlet
A3 Correction to Basic NPSH for Acceleration Head
A4 Calculation of Available NPSH
A5 Correction to NPSH for Fluid Properties
A6 Calculation of Suction Specific Speed
A7 Priming
A8 Submergence
SECTION B – FLOW / HEAD RATING SEQUENCE
B1 Calculation of Static Head
B2 Calculation of Margins for Control
B3 Calculation of Q-H Duty
B4 Stability and Parallel Operation
B5 Corrections to Q-H Duty for Fluid Properties
B6 Guide to Pump Type and Speed
SECTION C – DRIVER POWER RATING
C1 Estimation of Pump Efficiency
C2 Calculation of Absorbed Power
C3 Calculation of Driver Power Rating
C4 Preliminary Power Ratings of Electric Motors
C5 Starting Conditions for Electric Motors
C6 Reverse Flow and Reverse Rotation
SECTION D - CASING PRESSURE RATING
D1 Calculation of Maximum Inlet Pressure
D2 Calculation of Differential Pressure
D3 Pressure Waves
D4 Pressure due to Liquid Thermal Expansion
D5 Casing Hydrostatic Test Pressure
SECTION E – SEALING CONSIDERATIONS
E1 Preliminary Choice of Seal
E2 Fluid Attributes
E3 Definition of Flushing Arrangements
APPENDICES
A RELIABILITY CLASSIFICATION
B SYMBOLS AND PREFERRED UNITS
DOCUMENTS REFERRED TO IN THIS ENGINEERING DESIGN GUIDE
Typical Stabilizer Chloride Management Problems
What Causes NH4Cl Salts?
Mitigating System Fouling
Operating practices
Problems with Water Injection
Design To Mitigate Salt Formation
Prevention
Remove Nitrogen from the feed
Remove chloride from stabilizer feed
Chloride Guard Bed
Caustic Injection
Water Wash
Summary
Hydrogen Compressors
Engineering Design Guide
1 SCOPE
2 PHYSICAL ROPERTIES
2.1 Data for Pure Hydrogen
2.2 Influence of Impurities
3 MATERIALS OF CONSTRUCTION
3.1 Hydrogen from Electrolytic Cells
3.2 Pure Hydrogen
4 DESIGN
4.1 Pulsation
4.2 Bypass
5 TESTING OR COMMISSIONING RECIPROCATING COMPRESSORS
6 LUBRICATION
7 LAYOUT
8 REFERENCES
FIGURES
1 MOLLIER CHART - HYDROGEN
2 COMPRESSIBILITY CHART
3 NELSON DIAGRAM
4 WATER CONTENT IN HYDROGEN FOR OIL-LUBRICATED COMPRESSORS AS GRAMM/M2 SWEPT CYLINDER AREA
Study 5: Pre-commissioning Safety Review
CONTENTS
5.0 PURPOSE
5.0.1 Team
5.0.2 Timing
5.0.3 Preparation
5.0.4 Documentation
HAZARD STUDY 5: APPLICATION
5.1 TOUR OF THE PROJECT
5.2 REVIEW OF HAZARD STUDY 5
Integration of Special Purpose Centrifugal Pumps into a ProcessGerard B. Hawkins
Integration of Special Purpose Centrifugal Pumps into a Process
CONTENTS
1 SCOPE
2 PRELIMINARY CHOICE OF PUMP
SECTION A - INLET CONDITIONS
Al Calculation of Basic Nett Positive Suction Head (NPSH)
A2 Correction to Basic NPSH for Temperature Rise at Pump Inlet
A3 Correction to Basic NPSH for Acceleration Head
A4 Calculation of Available NPSH
A5 Correction to NPSH for Fluid Properties
A6 Calculation of Suction Specific Speed
A7 Priming
A8 Submergence
SECTION B – FLOW / HEAD RATING SEQUENCE
B1 Calculation of Static Head
B2 Calculation of Margins for Control
B3 Calculation of Q-H Duty
B4 Stability and Parallel Operation
B5 Corrections to Q-H Duty for Fluid Properties
B6 Guide to Pump Type and Speed
SECTION C – DRIVER POWER RATING
C1 Estimation of Pump Efficiency
C2 Calculation of Absorbed Power
C3 Calculation of Driver Power Rating
C4 Preliminary Power Ratings of Electric Motors
C5 Starting Conditions for Electric Motors
C6 Reverse Flow and Reverse Rotation
SECTION D - CASING PRESSURE RATING
D1 Calculation of Maximum Inlet Pressure
D2 Calculation of Differential Pressure
D3 Pressure Waves
D4 Pressure due to Liquid Thermal Expansion
D5 Casing Hydrostatic Test Pressure
SECTION E – SEALING CONSIDERATIONS
E1 Preliminary Choice of Seal
E2 Fluid Attributes
E3 Definition of Flushing Arrangements
APPENDICES
A RELIABILITY CLASSIFICATION
B SYMBOLS AND PREFERRED UNITS
DOCUMENTS REFERRED TO IN THIS ENGINEERING DESIGN GUIDE
VULCAN Series VSG-Z101 Primary Reforming
Initial Catalyst Reduction
Activating (reducing) the catalyst involves changing the nickel oxide to nickel, represented by:
NiO + H2 <==========> Ni + H2O
Natural gas is typically used as the hydrogen source. When it is, the catalyst reduction and putting the reformer on-line are accompanied in the same step.
Methanation catalysts are almost always manufactured and transported in the oxidized form, and therefore they must be reduced in the reactor to give nickel metal in order to make them active. The reduction is usually carried out in process gas and occurs by the two reactions:
Pressure Relief Systems Vol 2
Causes of Relief Situations
This Volume 2 is a guide to the qualitative identification of common causes of overpressure in process equipment. It cannot be exhaustive; the process engineer and relief systems team should look for any credible situation in addition to those given in this Part which could lead to a need for pressure relief (a relief situation).
0 INTRODUCTION
The four main sources of Fugitive Emissions on most plants are valves, machine seals, re-makable joints and pressure relief devices. Other possible sources include open-ended lines, sampling connections, drains and vents.
Sometimes special precautions are taken to minimize Fugitive Emissions, for example the use of bellows seal valves. However, generally no special precautions are taken and the subsequent Fugitive Emissions to atmosphere represent a significant amount of plant losses.
Regulatory requirements covering Fugitive Emissions exist in many countries and therefore a leak reduction program should be implemented. Fugitive Emissions also represent financial losses to the business as well as potential damage to the environment.
Heating and Cooling of Batch Processes
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
3.1 units
4 STATEMENT OF THE PROBLEM
5 DEVELOPMENT OF THE METHOD
5.1 Assumptions
5.2 Basic Equations
6 APPLICATION OF THE METHOD
6.1 Determining the Behavior of an Existing System
6.2 Specifying the Heat Transfer Duty for a New System
APPENDICES
A DERIVATION OF THE EQUATIONS
B WORKED EXAMPLES
FIGURES
1 CASES CONSIDERED
Design and Simulation of Continuous Distillation ColumnsGerard B. Hawkins
Design and Simulation of Continuous Distillation Columns
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 FRACTIONAL DISTILLATION
5 ROUGH METHOD OF COLUMN DESIGN
5.1 Sharp Separations
5.2 Sloppy Separations
6 DETAIL DESIGN USING THE CHEMCAD DISTILLATION PROGRAM
6.1 Sharp Separations
6.2 Sloppy Separations
7 COMPLEX COLUMNS
7.1 Multiple Feeds
7.2 Sidestream Take-Offs
8 DESIGN USING A LABORATORY COLUMN
SIMULATION
9 DESIGN USING ACTUAL PLANT DATA
9.1 Uprating or Debottlenecking Exercises
10 REFERENCES
APPENDICES
A WORKED EXAMPLE
B SLOPPY SEPARATIONS
C SIMULATION USING PLANT DATA : CASE HISTORIES
TABLES
How to Use the GBHE Mixing Guides
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 THE MIXING GUIDES
4.1 Mixing Guides
4.2 GBHE Mixing and Agitation Manual
5 DEVICE SELECTION
6 MIXING QUESTIONNAIRE
6.1 What is being mixed?
6.2 Why is it being mixed?
6.3 How is it to be mixed?
6.4 Is Heat Transfer Important?
6.5 Is Mixing Time Important?
6.6 Is Inventory Important?
6.7 Is Subsequent Phase Separation Important?
6.8 What Quantities?
6.9 What are the Selection Criteria?
6.10 What Data are required?
7 BASICS
7.1 Bulk Movement
7.2 Shear and Elongation
7.3 Turbulent Diffusion
7.4 Molecular Diffusion
7.5 Mixing Mechanisms
APPENDICES
A ROTATING MIXING DEVICES
B MIXING DEVICES WITHOUT MOVING PARTS
Cost Estimating: Turbo Blowers
This GBHE Engineering Guide provides information to assist in preparing an estimate for the cost of single stage, integrally geared, turbo-blowers. The data contained is based on analysis of past purchases for projects and offers by vendors.
PRACTICAL GUIDE ON THE SELECTION OF PROCESS TECHNOLOGY FOR THE TREATMENT OF A...Gerard B. Hawkins
PRACTICAL GUIDE ON THE SELECTION OF PROCESS TECHNOLOGY FOR THE TREATMENT OF AQUEOUS ORGANIC EFFLUENT STREAMS
CONTENTS
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
3.1 IPU
3.2 AOS
3.3 BODs
3.4 COD
3.5 TOC
3.6 Toxicity
3.7 Refractory Organics/Hard COD
3.8 Heavy Metals
3.9 EA
3.10 Biological Treatment Terms
3.11 BATNEEC
3.12 BPEO
3.13 EQS/LV
3.14 IPC
3.15 VOC
3.16 F/M Ratio
3.17 MLSS
3.18 MLVSS
4 DESIGN/ECONOMIC GUIDELINES
5 EUROPEAN LEGISLATION
5.1 General
5.2 Integrated Pollution Control (IPC)
5.3 Best Available Techniques Not Entailing Excessive Costs (BATNEEC)
5.4 Best Practicable Environmental Option (BPEO)
5.5 Environmental Quality Standards(EQS)
6 IPU EXIT CONCENTRATION
7 SITE/LOCAL REQUIREMENTS
8 PROCESS SELECTION PROCEDURE
8.1 Waste Minimization Techniques (WMT)
8.2 AOS Stream Definition
8.3 Technical Check List
8.4 Preliminary Selection of Suitable Technologies
8.5 Process Sequences
8.6 Economic Evaluation
8.7 Process Selection
APPENDICES
A DIRECTIVE 76/464/EEC - LIST 1
B DIRECTIVE 76/464/EEC - LIST 2
C THE EUROPEAN COMMISSION PRIORITY CANDIDATE LIST
D THE UK RED LIST
E CURRENT VALUES FOR EUROPEAN COMMUNITY ENVIRONMENTAL QUALITY STANDARDS AND CORRESPONDING LIMIT VALUES
F ESTABLISHED TECHNOLOGIES
G EMERGING TECHNOLOGY
H PROPRIETARY/LESS COMMON TECHNOLOGIES
J COMPARATIVE COST DATA
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
Reactor Modeling Tools - An Overview
CONTENTS
1 SCOPE
2 OPTIONS IN REACTOR MODELING
2.1 General
2.2 Level of Complexity of Model
2.3 Mode of Operation of Model
2.4 Deterministic versus Empirical Modeling
2.5 Platforms for Model
2.6 Steady State versus Dynamic Model
2.7 Dimensions Modeled in Reactor
2.8 Scale of Modeling for Multiphase Reactors
2.9 Writing and Using the Model
APPENDICES
A CHARACTERISTICS OF DIFFERENT REACTOR MODELS
B NEEDS FOR MODELING AT DIFFERENT SCALES IN
HETEROGENEOUS CATALYTIC REACTORS
C REACTOR MODELS EMPLOYED WITHIN GBHE
DOCUMENTS REFERRED TO IN THIS PROCESS ENGINEERING GUIDE
Electric Process Heaters
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 ADVANTAGES OF ELECTRIC HEATERS
4.1 Safety
4.2 Environment
4.3 Location of Equipment
4.4 Low Temperature Applications
4.5 Cross Contamination
4.6 Control
5 DISADVANTAGES OF ELECTRIC HEATERS
6 POTENTIAL APPLICATIONS FOR ELECTRIC
PROCESS HEATERS
7 GENERAL DESIGN AND OPERATING CONSIDERATIONS
8 TYPES OF PROCESS ELECTRIC HEATERS
8.1 Pipeline Immersion Heaters
8.2 Tank Heaters and Boilers
8.3 Indirect (Fluid Bath) Heaters
8.4 Radiant Furnaces
8.5 Induction Heaters
8.6 Hot Block Heaters
9 CONTROL
10 REFERENCES
FIGURES
1 ELECTRIC HEAT EXCHANGER CONSTRUCTION
2 SHEATHED HEATING ELEMENTS
Centrifugal Compressors
SECTION ONE - ANTI-SURGE PROTECTION AND THROUGHPUT REGULATION
0 INTRODUCTION
1 SCOPE
2 MACHINE CHARACTERISTICS
2.1 Characteristics of a Single Compressor Stage
2.2 Characteristic of a Multiple Stage Having More
Than One Impeller
2.3 Use of Compressor Characteristics in Throughput
Regulation Schemes
3 MECHANISM AND EFFECTS OF SURGE
3.1 Basic Flow Instabilities
3.2 Occurrence of Surge
3.3 Intensity of Surge
3.4 Effects of Surge
3.5 Avoidance of Surge
3.6 Recovery from Surge
4 CONTROL SCHEMES INCLUDING SURGE PROTECTION
4.1 Output Control
4.2 Surge Protection
4.3 Surge Detection and Recovery
5 DYNAMIC CONSIDERATIONS
5.1 Interaction
5.2 Speed of Response of Antisurge Control System
6 SYSTEM EQUIPMENT SPECIFICATIONS
6.1 The Antisurge Control Valve
6.2 Non-return Valve
6.3 Pressure and flow measurement
6.4 Signal transmission
6.5 Controllers
7 TESTING
7.1 Determination of the Surge Line
7.2 Records
8 INLET GUIDE VANE UNITS
8.1 Application
8.2 Effect on Power Consumption of the Compressor
8.3 Effect of Gas Conditions, Properties and Contaminants
8.4 Aerodynamic Considerations
8.5 Control System Linearity
8.6 Actuator Specification
8.7 Avoidance of Surge
8.8 Features of Link Mechanisms
8.9 Limit Stops and Shear Links
APPENDICES
A LIST OF SYMBOLS AND PREFERRED UNITS
B WORKED EXAMPLE 1 COMPRESSOR WITH VARIABLE INLET PRESSURE AND VARIABLE GAS COMPOSITION
C WORKED EXAMPLE 2 A CONSTANT SPEED ~ STAGE COMPRESSOR WITH INTER-COOLING
D WORKED EXAMPLE 3 DYNAMIC RESPONSE OF THE ANTISURGE PROTECTION SYSTEM FOR A SERVICE AIR COMPRESSOR RUNNING AT CONSTANT SPEED
E EXAMPLE OF INLET GUIDE VANE REGULATION
FIGURES
2.1 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT DISCHARGE CONDITIONS
2.2 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT INLET CONDITIONS
2.3 PERFORMANCE CHARACTERISTICS OF A COMPRESSOR STAGE AT VARYING SPEEDS
2.4 SYSTEM WORKING POINT DEFINED BY INTERSECTION OF PROCESS AND COMPRESSOR CHARACTERISTICS
2.5 DISCHARGE THROTTLE REGULATION
2.6 BYPASS REGULATION
2.7 INLET THROTTLE REGULATION
2.8 INLET GUIDE VANE REGULATION
2.9 VARIABLE SPEED REGULATION
3.1 GAS PULSATION LEVELS FOR A CENTRIFUGAL COMPRESSOR
3.2 REPRESENTATION OF CYCLIC FLOW DURING SURGE OF LONG PERIOD
3.3 TYPICAL WAVEFORM OF DISCHARGE PRESSURE DURING SURGE
3.4 MULTIPLE SURGE LINE FOR A MULTISTAGE CENTRIFUGAL COMPRESSOR
3.5 TYPICAL MULTIPLE SURGE LINES FOR SINGLE STAGE AXIAL-FLOW COMPRESSOR
4.1 GENERAL SCHEMATIC FOR COMPRESSORS OPERATING IN PARALLEL TO FEED MULTIPLE USER PLANTS
4.2 ILLUSTRATION OF SAFETY MARGIN BETWEEN SURGE POINT AND SURGE PROTECTION POINT AT WHICH ANTISURGE SYSTEM IS ACTIVATED
4.3 ANTISURGE SYSTEM FOR COMPRESSOR WITH FLAT PERFO ..........
VULCAN Series VSG-Z101 Primary Reforming
Initial Catalyst Reduction
Activating (reducing) the catalyst involves changing the nickel oxide to nickel, represented by:
NiO + H2 <==========> Ni + H2O
Natural gas is typically used as the hydrogen source. When it is, the catalyst reduction and putting the reformer on-line are accompanied in the same step.
Methanation catalysts are almost always manufactured and transported in the oxidized form, and therefore they must be reduced in the reactor to give nickel metal in order to make them active. The reduction is usually carried out in process gas and occurs by the two reactions:
Pressure Relief Systems Vol 2
Causes of Relief Situations
This Volume 2 is a guide to the qualitative identification of common causes of overpressure in process equipment. It cannot be exhaustive; the process engineer and relief systems team should look for any credible situation in addition to those given in this Part which could lead to a need for pressure relief (a relief situation).
0 INTRODUCTION
The four main sources of Fugitive Emissions on most plants are valves, machine seals, re-makable joints and pressure relief devices. Other possible sources include open-ended lines, sampling connections, drains and vents.
Sometimes special precautions are taken to minimize Fugitive Emissions, for example the use of bellows seal valves. However, generally no special precautions are taken and the subsequent Fugitive Emissions to atmosphere represent a significant amount of plant losses.
Regulatory requirements covering Fugitive Emissions exist in many countries and therefore a leak reduction program should be implemented. Fugitive Emissions also represent financial losses to the business as well as potential damage to the environment.
Heating and Cooling of Batch Processes
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
3.1 units
4 STATEMENT OF THE PROBLEM
5 DEVELOPMENT OF THE METHOD
5.1 Assumptions
5.2 Basic Equations
6 APPLICATION OF THE METHOD
6.1 Determining the Behavior of an Existing System
6.2 Specifying the Heat Transfer Duty for a New System
APPENDICES
A DERIVATION OF THE EQUATIONS
B WORKED EXAMPLES
FIGURES
1 CASES CONSIDERED
Design and Simulation of Continuous Distillation ColumnsGerard B. Hawkins
Design and Simulation of Continuous Distillation Columns
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 FRACTIONAL DISTILLATION
5 ROUGH METHOD OF COLUMN DESIGN
5.1 Sharp Separations
5.2 Sloppy Separations
6 DETAIL DESIGN USING THE CHEMCAD DISTILLATION PROGRAM
6.1 Sharp Separations
6.2 Sloppy Separations
7 COMPLEX COLUMNS
7.1 Multiple Feeds
7.2 Sidestream Take-Offs
8 DESIGN USING A LABORATORY COLUMN
SIMULATION
9 DESIGN USING ACTUAL PLANT DATA
9.1 Uprating or Debottlenecking Exercises
10 REFERENCES
APPENDICES
A WORKED EXAMPLE
B SLOPPY SEPARATIONS
C SIMULATION USING PLANT DATA : CASE HISTORIES
TABLES
How to Use the GBHE Mixing Guides
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 THE MIXING GUIDES
4.1 Mixing Guides
4.2 GBHE Mixing and Agitation Manual
5 DEVICE SELECTION
6 MIXING QUESTIONNAIRE
6.1 What is being mixed?
6.2 Why is it being mixed?
6.3 How is it to be mixed?
6.4 Is Heat Transfer Important?
6.5 Is Mixing Time Important?
6.6 Is Inventory Important?
6.7 Is Subsequent Phase Separation Important?
6.8 What Quantities?
6.9 What are the Selection Criteria?
6.10 What Data are required?
7 BASICS
7.1 Bulk Movement
7.2 Shear and Elongation
7.3 Turbulent Diffusion
7.4 Molecular Diffusion
7.5 Mixing Mechanisms
APPENDICES
A ROTATING MIXING DEVICES
B MIXING DEVICES WITHOUT MOVING PARTS
Cost Estimating: Turbo Blowers
This GBHE Engineering Guide provides information to assist in preparing an estimate for the cost of single stage, integrally geared, turbo-blowers. The data contained is based on analysis of past purchases for projects and offers by vendors.
PRACTICAL GUIDE ON THE SELECTION OF PROCESS TECHNOLOGY FOR THE TREATMENT OF A...Gerard B. Hawkins
PRACTICAL GUIDE ON THE SELECTION OF PROCESS TECHNOLOGY FOR THE TREATMENT OF AQUEOUS ORGANIC EFFLUENT STREAMS
CONTENTS
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
3.1 IPU
3.2 AOS
3.3 BODs
3.4 COD
3.5 TOC
3.6 Toxicity
3.7 Refractory Organics/Hard COD
3.8 Heavy Metals
3.9 EA
3.10 Biological Treatment Terms
3.11 BATNEEC
3.12 BPEO
3.13 EQS/LV
3.14 IPC
3.15 VOC
3.16 F/M Ratio
3.17 MLSS
3.18 MLVSS
4 DESIGN/ECONOMIC GUIDELINES
5 EUROPEAN LEGISLATION
5.1 General
5.2 Integrated Pollution Control (IPC)
5.3 Best Available Techniques Not Entailing Excessive Costs (BATNEEC)
5.4 Best Practicable Environmental Option (BPEO)
5.5 Environmental Quality Standards(EQS)
6 IPU EXIT CONCENTRATION
7 SITE/LOCAL REQUIREMENTS
8 PROCESS SELECTION PROCEDURE
8.1 Waste Minimization Techniques (WMT)
8.2 AOS Stream Definition
8.3 Technical Check List
8.4 Preliminary Selection of Suitable Technologies
8.5 Process Sequences
8.6 Economic Evaluation
8.7 Process Selection
APPENDICES
A DIRECTIVE 76/464/EEC - LIST 1
B DIRECTIVE 76/464/EEC - LIST 2
C THE EUROPEAN COMMISSION PRIORITY CANDIDATE LIST
D THE UK RED LIST
E CURRENT VALUES FOR EUROPEAN COMMUNITY ENVIRONMENTAL QUALITY STANDARDS AND CORRESPONDING LIMIT VALUES
F ESTABLISHED TECHNOLOGIES
G EMERGING TECHNOLOGY
H PROPRIETARY/LESS COMMON TECHNOLOGIES
J COMPARATIVE COST DATA
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
Reactor Modeling Tools - An Overview
CONTENTS
1 SCOPE
2 OPTIONS IN REACTOR MODELING
2.1 General
2.2 Level of Complexity of Model
2.3 Mode of Operation of Model
2.4 Deterministic versus Empirical Modeling
2.5 Platforms for Model
2.6 Steady State versus Dynamic Model
2.7 Dimensions Modeled in Reactor
2.8 Scale of Modeling for Multiphase Reactors
2.9 Writing and Using the Model
APPENDICES
A CHARACTERISTICS OF DIFFERENT REACTOR MODELS
B NEEDS FOR MODELING AT DIFFERENT SCALES IN
HETEROGENEOUS CATALYTIC REACTORS
C REACTOR MODELS EMPLOYED WITHIN GBHE
DOCUMENTS REFERRED TO IN THIS PROCESS ENGINEERING GUIDE
Electric Process Heaters
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 ADVANTAGES OF ELECTRIC HEATERS
4.1 Safety
4.2 Environment
4.3 Location of Equipment
4.4 Low Temperature Applications
4.5 Cross Contamination
4.6 Control
5 DISADVANTAGES OF ELECTRIC HEATERS
6 POTENTIAL APPLICATIONS FOR ELECTRIC
PROCESS HEATERS
7 GENERAL DESIGN AND OPERATING CONSIDERATIONS
8 TYPES OF PROCESS ELECTRIC HEATERS
8.1 Pipeline Immersion Heaters
8.2 Tank Heaters and Boilers
8.3 Indirect (Fluid Bath) Heaters
8.4 Radiant Furnaces
8.5 Induction Heaters
8.6 Hot Block Heaters
9 CONTROL
10 REFERENCES
FIGURES
1 ELECTRIC HEAT EXCHANGER CONSTRUCTION
2 SHEATHED HEATING ELEMENTS
Centrifugal Compressors
SECTION ONE - ANTI-SURGE PROTECTION AND THROUGHPUT REGULATION
0 INTRODUCTION
1 SCOPE
2 MACHINE CHARACTERISTICS
2.1 Characteristics of a Single Compressor Stage
2.2 Characteristic of a Multiple Stage Having More
Than One Impeller
2.3 Use of Compressor Characteristics in Throughput
Regulation Schemes
3 MECHANISM AND EFFECTS OF SURGE
3.1 Basic Flow Instabilities
3.2 Occurrence of Surge
3.3 Intensity of Surge
3.4 Effects of Surge
3.5 Avoidance of Surge
3.6 Recovery from Surge
4 CONTROL SCHEMES INCLUDING SURGE PROTECTION
4.1 Output Control
4.2 Surge Protection
4.3 Surge Detection and Recovery
5 DYNAMIC CONSIDERATIONS
5.1 Interaction
5.2 Speed of Response of Antisurge Control System
6 SYSTEM EQUIPMENT SPECIFICATIONS
6.1 The Antisurge Control Valve
6.2 Non-return Valve
6.3 Pressure and flow measurement
6.4 Signal transmission
6.5 Controllers
7 TESTING
7.1 Determination of the Surge Line
7.2 Records
8 INLET GUIDE VANE UNITS
8.1 Application
8.2 Effect on Power Consumption of the Compressor
8.3 Effect of Gas Conditions, Properties and Contaminants
8.4 Aerodynamic Considerations
8.5 Control System Linearity
8.6 Actuator Specification
8.7 Avoidance of Surge
8.8 Features of Link Mechanisms
8.9 Limit Stops and Shear Links
APPENDICES
A LIST OF SYMBOLS AND PREFERRED UNITS
B WORKED EXAMPLE 1 COMPRESSOR WITH VARIABLE INLET PRESSURE AND VARIABLE GAS COMPOSITION
C WORKED EXAMPLE 2 A CONSTANT SPEED ~ STAGE COMPRESSOR WITH INTER-COOLING
D WORKED EXAMPLE 3 DYNAMIC RESPONSE OF THE ANTISURGE PROTECTION SYSTEM FOR A SERVICE AIR COMPRESSOR RUNNING AT CONSTANT SPEED
E EXAMPLE OF INLET GUIDE VANE REGULATION
FIGURES
2.1 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT DISCHARGE CONDITIONS
2.2 TYPICAL COMPRESSOR STAGE CHARACTERISTIC PLOTTED WITH FLOW AT INLET CONDITIONS
2.3 PERFORMANCE CHARACTERISTICS OF A COMPRESSOR STAGE AT VARYING SPEEDS
2.4 SYSTEM WORKING POINT DEFINED BY INTERSECTION OF PROCESS AND COMPRESSOR CHARACTERISTICS
2.5 DISCHARGE THROTTLE REGULATION
2.6 BYPASS REGULATION
2.7 INLET THROTTLE REGULATION
2.8 INLET GUIDE VANE REGULATION
2.9 VARIABLE SPEED REGULATION
3.1 GAS PULSATION LEVELS FOR A CENTRIFUGAL COMPRESSOR
3.2 REPRESENTATION OF CYCLIC FLOW DURING SURGE OF LONG PERIOD
3.3 TYPICAL WAVEFORM OF DISCHARGE PRESSURE DURING SURGE
3.4 MULTIPLE SURGE LINE FOR A MULTISTAGE CENTRIFUGAL COMPRESSOR
3.5 TYPICAL MULTIPLE SURGE LINES FOR SINGLE STAGE AXIAL-FLOW COMPRESSOR
4.1 GENERAL SCHEMATIC FOR COMPRESSORS OPERATING IN PARALLEL TO FEED MULTIPLE USER PLANTS
4.2 ILLUSTRATION OF SAFETY MARGIN BETWEEN SURGE POINT AND SURGE PROTECTION POINT AT WHICH ANTISURGE SYSTEM IS ACTIVATED
4.3 ANTISURGE SYSTEM FOR COMPRESSOR WITH FLAT PERFO ..........
Dedicated with more than 23 years of experience in construction field (Power, Oil & Gas ) including exclusively 16 years’ experience for Flange management and Hydro testing of cross country Pipeline (CS, DSS, HDPE and GRE), Plant piping & Storage tanks in Oil & Gas industry. Worked as a Piping engineer, Hydro testing coordinator, Hydro-testing engineer, Hydro-testing Superintendent and Pre-commissioning manager. Familiar with International standards (ASME, API, ASTM, ISO & MSS SP) and Aramco standards, Petroleum Development specification, Shell DEP/ERD, Exxon Mobil specifications. Worked with ARAMCO, SHELL, PDO, ENI, EXXON MOBIL, BGC, SOC, RELIANCE, BECHTEL, GS engineering and ESSAR. Solid and extensive knowledge in the analysis on the feasibility in planning for over all Hydro-testing / Pre-commissioning activities.
These slides are developed for a part of the undergraduate course in Petroleum Refinery Engineering. The slides are also helpful for Masters level introductory course.
Standardization And Generalization Approach On Equipment Monitoring Method As A Basis For Reliability Analysis Using Gauge Parameters And Kks Hirarchy Structure
The value of selecting the right catalyst
Selecting the key performance criteria
Sources of data:
Plant data
Laboratory reactor data
Catalyst characterization
Recommendations
This presentation covers frequent and costly incidents related to catalysts mal-operation with the focus of providing the plant operator with recommendations to avoid plant outages and catalyst losses.
SMR PRE-REFORMER DESIGN
Case Study #0618416GB/H
Contents
1. SMR Pre-Reformer Design
2. Inlet Baffle Design
3. Outlet Collector
4. Hold Down Grating
5. Floating Hold Down Screen
6. Catalyst Drop Out Nozzle
7. Thermowell Detail
8. Technical Performance requirements
9. SMR Pre-Reformer Isolation
Technical Review and Commentary on Proposed Design
APPENDIX
A. Operating / Mechanical Data
B. Materials Specifications
C. Fabrication and Inspection Requirements
D. Weights
E. Nozzle Data
F. Instrument Connections
G. Manholes
Fixed Bed Reactor Scale-up Checklist
The purpose of this checklist is to identify the stages and potential problems associated with the scale up of fixed bed reactors from the drawing board to the full scale plant, and to determine how they should be checked.
The checking can be done using various methods. These are:
• Literature data.
• Lab testing.
• Calculation.
• Modeling.
• Semi-tech testing.
• Piloting or Sidestream testing.
Identifying the stages that need to be addressed for a particular catalyst/reactor development will help in estimating the time needed for the development of the reactor
(AGRU) ACID GAS SOUR SHIFT: CASE STUDY IN REFINERY GAS TREATMENTGerard B. Hawkins
(AGRU) ACID GAS SOUR SHIFT: CASE STUDY IN REFINERY GAS TREATMENT; Case Study: #0978766GB/H
CASE STUDY OVERVIEW
Syn Gas Sour Shift: Process Flow Diagram
AGR: Acid Gas to VULCAN SYSTEMS Sour Gas Shift
DESIGN BASIS:
ACID GAS REACTOR CATALYST SPECIFICATION
SOUR SHIFT CASE
SHIFT REACTOR CATALYST SPECIFICATIONS
COS REACTOR CATALYST SPECIFICATIONS
SWEET SHIFT CASE
SHIFT REACTOR CATALYST SPECIFICATIONS
PERFORMANCE SIMULATION RESULTS
SOUR SHIFT SECTION
1 Cases Considered
2 Catalyst Used
3 Client Requirements
4 Oxygen and Olefins
5 HCN
6 NH3
7 Arsine
8 Input Data Sour Shift Unit
9 Activity (PROPRIETARY)
10 Results
ADIABATIC SWEET SHIFT SECTION: HTS Reactor followed by LTS Reactor
1 Catalyst Used
2 Inlet Operating Temperature HTS Reactor
3 Feed Flow Rate, Inlet Operating Pressure and Feed Composition HTS Reactor
4 Inlet Operating Conditions LTS Reactor
5 Client Requirements
6 Results: Standard Case as Presented to the Client
7 Results: Inlet Operating Pressure HTS Reactor = 25.2 bara
8 Results: Addition of 100 kmol/h N2
COS HYDROLYSIS SECTION FOR SWEET SHIFT CASE
1 Total Feed Flow Rate, Feed Composition, Direction of Flow, Inlet Operating Temperature, Inlet Operating Pressure
2 Inlet H2S and COS Levels
3 Equilibrium H2S and COS Levels (COS Hydrolysis Reaction)
4 Client Requirements
5 Results
H2S REMOVAL SECTION AFTER AGR UNIT
(2 Absorbent Beds (VULCAN VSG-EZ200) in Lead/Lag Arrangement)
1 Total Feed Flow Rate, Feed Composition, Direction of Flow, Inlet Operating Temperature, Inlet Operating Pressure
2 Inlet H2S and COS Levels
3 Client Requirements (All Cases)
4 Results
ISOTHERMAL SWEET SHIFT SECTION: Alternative Approach
VULCAN Simulation Input Data
1 Enthalpy method
2 Cases considered
3 Feed stream data
4 Kinetics
5 Catalyst
6 Catalyst Activity relative to standard
7 Catalyst size and packing details
8 Catalyst pressure drop parameters
9 Catalyst Volume
10 Standard die-off rate
11 BFW Rate
12 Vapor fraction
13 Steam Temperature
14 Steam Pressure
15 Boiling Model
16 Volumetric UA
Isothermal Shift Simulations Results
APPENDIX
Characteristics of Acid Gas Removal Technologies
Large Water Pumps
CONTENTS
1 SCOPE
SECTION ONE: INTEGRATION OF PUMPS INTO THE PROCESS
2 PROPERTIES OF FLUID
2.1 Cooling Water
2.2 Brine
2.3 Estuary Water
2.4 Harbor Water
2.5 Oil-field water
3 CALCULATION OF DUTY
4 CHOICE OF TYPE AND NUMBER OF PUMPS
4.1 Type of Pump
4.2 Points to Consider
4.3 Number of Pumps
5 RECOMMENDED LINE DIAGRAM
5.1 Check List for Each Pump
6 RECOMMENDED LAYOUT
SECTION TWO: CONSTRUCTION FEATURES
7 HORIZONTAL, AXIALLY SPLIT CASING PUMPS
7.1 Pressure Casing
7.2 Bolting
7.3 Flanges and Connections
7.4 Rotating Elements
7.5 Wear Rings
7.6 Running Clearances
7.7 Mechanical Seals
7.8 Packed Glands
7.9 Bearings and Bearing Housings
7.10 Lubrication
7.11 Couplings
7.12 Guards
7.13 Baseplates
7.14 Flywheels
8 VERTICAL PUMPS
8.1 General
8.2 Pressure Casing
8.3 Bolting
8.4 Flanges and Connections
8.5 Rotating Element
8.6 Packed Glands
8.7 Bearings and Bearing Housings
8.8 Pump Head
8.9 Column Pipes
8.10 Line Shaft and Couplings
8.11 Reverse Rotation
8.12 Gearboxes
9 MATERIALS
9.1 Castings
9.2 Casings
9.3 Impellers
9.4 Shafts
9.5 Shaft Sleeves
9.6 Bolts and Nuts
10 DRIVERS
10.1 Electric Motor Drives
11 BIBLIOGRAPHY
APPENDICES:
A COOLING WATER - EUROPEAN SITE
B TIDAL RIVER ESTUARY
C FLYWHEEL INERTIA FOR PRESSURE SURGE ABATEMENT
D RESIN COATING OF CASINGS FOR WATER PUMPS
E AREA RATIO METHOD
F NOTES ON PUMP IMPELLERS CASTINGS
G LIMIT ON SHAFT DIAMETER FOR HORIZONTAL PUMPS HAVING
ONE DOUBLE-ENTRY IMPELLER SUPPORTED BETWEEN BEARINGS
H FORCES AND BENDING MOMENTS ON RISING MAIN ASSEMBLY
I POWER COSTS
J PUTATIVE COST COMPARISON SHEET
K TECHNICAL COMPARISON SHEETS
FIGURES
2.1 VAPOR TEMPERATURE CURVES
2.2 DENSITY TEMPERATURE CURVES
3.1 TYPICAL HEAD OF PUMPS
3.2 TOTAL HEAD OF VERTICAL IMMERSED PUMP
3.3 TYPICAL TIDAL RIVER ESTUARY LEVELS
3.5 SUBMERGENCE LIMITS
4.1 TYPES OF PUMP
4.2 GUIDE TO PUMP TYPE AND SPEED
5.1 TYPICAL LINE DIAGRAM
6 GUIDE TO SUCTION PIPEWORK DESIGN
7 CASING AND IMPELLER DETAILS
8.1 DRY WELL AND WET WELL PUMP INSTALLATIONS
8.2 BELLMOUTH DIMENSIONS FOR VERTICAL INTAKES
8.3 MAXIMUM SPACING BETWEEN SHAFT GUIDE BUSHING
8.4 LINE SHAFT COUPLING
9 TYPICAL VOLUTE CASING
10 TYPICAL CASE WEAR RINGS
11 SEAL AREA
TABLES
1 LIQUID PROPERTIES SODIUM CHLORIDE (25% W/W)
2 LIQUID PROPERTIES SODIUM CHLORIDE (20% W/W)
3 LIQUID PROPERTIES SODIUM CHLORIDE (16.25% W/W)
4 LIQUID PROPERTIES SODIUM CHLORIDE (15% W/W)
5 LIQUID PROPERTIES SODIUM CHLORIDE (10% W/W)
6 LIQUID PROPERTIES SODIUM CHLORIDE (5% W/W)
7 GUIDE TO PUMP TYPE AND SPEED
8 RECOMMENDED CAST MATERIALS FOR USE IN THE PUMP INDUSTRY
GRAPHS
1 GUIDE TO ROTOR INERTIA
2 LIMITS BETWEEN BEARINGS
DOCUMENTS REFERRED TO IN THIS ENGINEERING DEPARTMENT DESIGN GUIDE
Reciprocating Compressors - Protection against Crank Case ExplosionsGerard B. Hawkins
Reciprocating Compressors - Protection against Crank Case Explosions
1 SCOPE
2 OIL MIST/AIR MIXTURE EXPLOSIONS
3 PREVENTION AND PROTECTION
3.1 Design
3.2 Maintenance and Operation
FIGURES
1 FLAMMABILITY LIMITS AND SPONTANEOUS IGNITION REGION FOR MIXTURES OF LUBRICATING OIL VAPOR IN AIR.
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
CASE STUDY #091406
Case Background
A Methanol plant operator would like to examine the technical feasibility of using Shale Gas as a feedstock to their Methanol plant.
The first step in the Methanol production process is gas pretreatment. The purpose of gas pretreatment is to make the gas suitable for the downstream processes. There are two groups of compounds that are usually present in natural gas and that should be removed during pretreatment—the associate NGL and the sulfur-containing compounds. Some natural gas reservoirs may also have other trace components that must be removed, but these are not discussed here.
This case study examines the impact of CO2 (Carbon Dioxide) on the pre-treatment section design, performance and efficiency of ACME Methanol Plant’ feed gas pre-treatment section.
Case 1: Normal Shale Gas
Case 2: “Bad Gas”
Case 3: Low CO2
Case 4: High CO2
OVERVIEW - FIXED BED ADSORBER DESIGN GUIDELINES
Fixed-bed adsorber design is based upon the following considerations:
• Adsorbent bed profile and media loading capacity characteristics for the specific application and adsorbent material used.
• Pressure drop characteristics across the adsorbent bed.
• Reaction kinetics.
Typically, adsorber design entails use of the following methodology:
• Adsorbent selection based upon performance and application information.
• Bed sizing based upon adsorbent loading data and service life requirements.
• Bed sizing adjustment based upon pressure drop criteria.
• Bed sizing adjustment based upon reaction kinetics criteria.
A discussion of each design consideration follows.
Pressure Systems
CONTENTS
0 INTRODUCTION
1 SCOPE
2 DEFINITIONS ADDITIONAL TO THOSE IN THE EP GLOSSARY
2.1 PRESSURE VESSEL
2.2 ATMOSPHERIC PRESSURE STORAGE TANK
2.3 VESSEL
2.4 PIPING SYSTEM
2.5 NON-PRESSURE PROTECTIVE DEVICE
2.6 ASSOCIATED RELIEF EQUIPMENT
3 APPLICATION OF PRINCIPLES
3.1 IMPLEMENTATION OF PEG 4
3.2 DESIGN, MANUFACTURE, REPAIR AND MODIFICATION
3.3 VERIFICATION OF DESIGN
3.4 GBHE REGISTRATION AND RECORDS
3.5 PERIODIC EXAMINATION
4 AUDITING
4.1 General
4.2 Scope of Audit
APPENDICES
A EQUIPMENT WHICH MAY BE EXEMPTED FROM GBHE REGISTRATION
C DOCUMENTATION FOR INCLUSION IN FILES OF REGISTERED EQUIPMENT
D ADDITIONAL REQUIREMENTS FOR THE PERIODIC EXAMINATION OF SPECIAL CATEGORIES OF EQUIPMENT
E DIAGRAMMATIC REPRESENTATION OF PRESSURE SYSTEMS PROCEDURES
F DECISION TREE FOR REGISTRATION OF PIPING SYSTEMS
G REGISTERED EQUIPMENT WHICH MAY BE EXEMPTED FROM DESIGN VERIFICATION
TABLES
1 REGISTERED VESSELS AND PIPING SYSTEMS: MAXIMUM EXAMINATION INTERVALS
2 EQUIPMENT TO BE CONSIDERED FOR CATEGORY LLT
FIGURES
1 SIMPLE PRESSURE RELIEF ARRANGEMENT
2 COMPLEX PRESSURE RELIEF ARRANGEMENT
DOCUMENTS REFERRED TO IN THIS INFORMATION FOR ENGINEERS DOCUMENT
DESIGN OF VENT GAS COLLECTION AND DESTRUCTION SYSTEMS Gerard B. Hawkins
DESIGN OF VENT GAS COLLECTION AND DESTRUCTION SYSTEMS
CONTENTS
1 INTRODUCTION
1.1 Purpose
1.2 Scope of this Guide
1.3 Use of the Guide
2 ENVIRONMENTAL ISSUES
2.1 Principal Concerns
2.2 Mechanisms for Ozone Formation
2.3 Photochemical Ozone Creation Potential
2.4 Health and Environmental Effects
2.5 Air Quality Standards for Ground Level Concentrations of Ozone, Targets for Reduction of VOC Discharges and Statutory Discharge Limits
3 VENTS REDUCTION PHILOSOPHY
3.1 Reduction at Source
3.2 End-of-pipe Treatment
4 METHODOLOGY FOR COLLECTION & ASSESSMENT OF PROCESS FLOW DATA
4.1 General
4.2 Identification of Vent Sources
4.3 Characterization of Vents
4.4 Quantification of Process Vent Flows
4.5 Component Flammability Data Collection
4.6 Identification of Operating Scenarios
4.7 Quantification of Flammability Characteristics for Combined Vents
4.8 Identification, Quantification and Assessment of Possibility of Air Ingress Routes
4.9 Tabulation of Data
4.10 Hazard Study and Risk Assessment
4.11 Note on Aqueous / Organic Wastes
4.12 Complexity of Systems
4.13 Summary
5 SAFE DESIGN OF VENT COLLECTION HEADER SYSTEMS
5.1 General
5.2 Process Design of Vent Headers
5.3 Liquid in Vent Headers
5.4 Materials of Construction
5.5 Static Electricity Hazard
5.6 Diversion Systems
5.7 Snuffing Systems
6 SAFE DESIGN OF THERMAL OXIDISERS
6.1 Introduction
6.2 Design Basis
6.3 Types of High Temperature Thermal Oxidizer
6.4 Refractories
6.5 Flue Gas Treatment
6.6 Control and Safety Systems
6.7 Project Program
6.8 Commissioning
6.9 Operational and Maintenance Management
APPENDICES
A GLOSSARY
B FLAMMABILITY
C EXAMPLE PROFORMA
D REFERENCES
DOCUMENTS REFERRED TO IN THIS PROCESS GUIDE
TABLE
1 PHOTOCHEMICAL OZONE CREATION POTENTIAL REFERENCED
TO ETHYLENE AS UNITY
FIGURES
1 SCHEMATIC OF TYPICAL VENT COLLECTION AND THERMAL OXIDIZER SYSTEM
2 TYPICAL KNOCK-OUT POT WITH LUTED DRAIN
3 SCHEMATIC OF DIVERSION SYSTEM
4 CONVENTIONAL VERTICAL THERMAL OXIDIZER
5 CONVENTIONAL OXIDIZER WITH INTEGRAL WATER SPARGER
6 THERMAL OXIDIZER WITH STAGED AIR INJECTION
7 DOWN-FIRED UNIT WITH WATER BATH QUENCH
8 FLAMELESS THERMAL OXIDATION UNIT
9 THERMAL OXIDIZER WITH REGENERATIVE HEAT RECOVERY
10 TYPICAL PROJECT PROGRAM
11 TYPICAL FLAMMABILITY DIAGRAM
12 EFFECT OF DILUTION WITH AIR
13 EFFECT OF DILUTION WITH AIR ON 100 Rm³ OF FLAMMABLE GAS
Design and Operation of NHT Strippers to Protect Catalytic Reformers Gerard B. Hawkins
Common Reformer Problems
Purpose of NHT Stripper
Typical Design
Instrumentation of NHT Stripper
Other Design Issues
Indications of Problems in the NHT
Response to Reformer Upsets
In pyrolysis gasoline hydrogenation there is a tendency to form polymeric materials on and in the catalyst bed. These are formed by condensation of gums and diolefins at local areas in the reactor .........
Data Sources For Calculating Chemical Reaction EquilibriaGerard B. Hawkins
Data Sources For Calculating Chemical Reaction Equilibria
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 BACKGROUND TO THEORY
5 BIBLIOGRAPHY
Batch Distillation
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 BACKGROUND TO THE DESIGN
4.1 General
4.2 Choice of batch/continuous operation
4.3 Boiling point curve and cut policy
4.4 Method of design
4.5 Scope of calculations required for design
5 SIMPLE BATCH DISTILLATION
6 FRACTIONAL BATCH DISTILLATION
6.1 General
6.2 Approximate methods
6.3 Rigorous design - use of a computer model
6.4 Other factors influencing the design
6.4.1 Occupation
6.4.2 Choice of Batch Rectification or Stripping
6.4.3 Batch size
6.4.4 Initial estimate of cut policy
6.4.5 Liquid Holdup
6.4.6 Total reflux operation and heating-up time
6.4.7 Column operating pressure
6.5 Optimum Design of the Batch Still
6.6 Special design problems
7 GENERAL ASPECTS OF EQUIPMENT DESIGN
7.1 Kettle reboilers
7.2 Column Internals
7.3 Condensers and reflux split boxes
8 PROCESS CONTROL AND INSTRUMENTATION IN
BATCH DISTILLATION
9 MECHANICAL DESIGN FEATURES
10 BIBLIOGRAPHY
APPENDICES
A McCABE - THIELE METHOD - TYPICAL EXAMPLE
Design and Rating of Packed Distillation Columns
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 DESIGN PHILOSOPHY
5 PERFORMANCE GUARANTEES
6 DESCRIPTION OF PACKED COLUMN INTERNALS
7. DESIGN CALCULATIONS
7.1 Selection of Packing Size
7.2 Rough Design
7.3 Detailed Design and Rating
8 LIQUID DISTRIBUTION AND REDISTRIBUTION
8.1 Basic Concepts
8.2 Pour Point Density
8.3 Peripheral Irrigation - the Wall Zone
8.4 Distributor Levelness
8.5 Maximum Bed Height and Liquid Redistribution
9 PRACTICAL ASPECTS OF PACKED COLUMN DESIGN
9.1 Packing
9.2 Support Grid
9.3 Liquid Collector
9.4 Liquid Distributor or Redistributor
9.5 Packing Hold-down Grid
9.6 Reflux or Feed Pipe
9.7 Reboil Return Pipe
9.8 Liquid Draw-offs
9.9 Vapor Draw-offs
10 BIBLIOGRAPHY
APPENDICES
A DEFINITIONS
A.1 INTRODUCTION
A.2 MECHANICAL DEFINITIONS
A.3 PERFORMANCE DEFINITIONS
B PACKING HYDRAULICS - THE NORTON METHOD
TABLES
1 PACKING FACTORS FOR THE MORE COMMON
RANDOM PACKINGS
Introduction High temperature shift Catalysts
Low temperature shift catalysts
Catalyst storage, handling, charging and discharging
Health and safety precautions
Reduction and start-up of high temperature shift catalysts
Operation of high temperature shift catalysts
Reduction and start-up of low temperature shift catalysts
Operation of low temperature shift catalysts
Avoiding Stress Corrosion Cracking of Carbon Low Alloy and Austenitic Stainl...Gerard B. Hawkins
Avoiding Stress Corrosion Cracking of Carbon Low Alloy and Austenitic Stainless Steels in Chloride and Caustic Environments
SYNOPSIS
This Maintenance Best Practice Guide is concerned with the performance of carbon and low alloy steels, and austenitic stainless steels, in chloride and caustic containing fluids. Those factors which are known to promote stress corrosion cracking are outlined, and service charts defining environmental boundaries for stress corrosion cracking in caustic and chloride containing fluids are presented.
General guidance on the avoidance of stress corrosion cracking is provided.
The Preliminary Choice of Fan or Compressor
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 METHOD FOR PRELIMINARY SELECTION
OF COMPRESSOR
5 PROCESS DATA SHEET
5.1 Essential Data for the Completion of a
Process Data Sheet
5.2 Gas Properties
5.3 Discharge Requirements
6 PRELIMINARY CHOICE OF FAN AND
COMPRESSOR TYPE
6.1 Essential Data for Preliminary Selection
7 FAN AND COMPRESSOR APPLICATIONS
7.1 Fans
7.2 Centrifugal Compressors
7.3 Axial Compressors
7.4 Reciprocating Compressors
7.5 Screw Compressors
7.6 Positive Displacement Blowers
7.7 Sliding Vane Compressors
7.8 Liquid Ring Compressors
8 PROVISION OF INSTALLED SPARES
9 PRELIMINARY ESTIMATE OF COSTS
Revamp objectives
Revamp Philosophy
Revamp options
Semi-Regenerative Reforming Unit
Typical Flow Scheme
Continuous Reforming Unit
Typical Flow Scheme
Revamp to Hybrid Operation
What may be achieved?
Typical C5+ Yield at Decreasing Pressure
Changes Required for Full Conversion
Typical Benefits of Full Conversion
Revamping of Existing Continuous Reforming Units
Fired Heaters Revamp
Burners
Reactor Options
Regeneration Section
Summary
Similar to VULCAN Series A2ST Advanced Alumina Support Technology (20)
Pressure Relief Systems
BACKGROUND TO RELIEF SYSTEM DESIGN Vol.1 of 6
The Guide has been written to advise those involved in the design and engineering of pressure relief systems. It takes the user from the initial identification of potential causes of overpressure or under pressure through the process design of relief systems to the detailed mechanical design. "Hazard Studies" and quantitative hazards analysis are not described; these are seen as complementary activities. Typical users of the Guide will use some Parts in detail and others in overview.
GAS DISPERSION - A Definitive Guide to Accidental Releases of Heavy GasesGerard B. Hawkins
GAS DISPERSION - A Definitive Guide to Accidental Releases of Heavy Gases
This Process Safety Guide has been written with the aim of assisting process engineers, hazard analysts and environmental advisers in carrying out gas dispersion calculations. The Guide aims to provide assistance by:
• Improving awareness of the range of dispersion models available within GBHE, and providing guidance in choosing the most appropriate model for a particular application.
• Providing guidance to ensure that source terms and other model inputs are correctly specified, and the models are used within their range of applicability.
• Providing guidance to deal with particular topics in gas dispersion such as dense gas dispersion, complex terrain, and modeling the chemistry of oxides of nitrogen.
• Providing general background on air quality and dispersion modeling issues such as meteorology and air quality standards.
• Providing example calculations for real practical problems.
SCOPE
The gas dispersion guide contains the following Parts:
1 Fundamentals of meteorology.
2 Overview of air quality standards.
3 Comparison between different air quality models.
4 Designing a stack.
5 Dense gas dispersion.
6 Calculation of source terms.
7 Building wake effects.
8 Overview of the chemistry of the oxides of nitrogen.
9 Overview of the ADMS complex terrain module.
10 Overview of the ADMS deposition module.
11 ADMS examples.
12 Modeling odorous releases.
13 Bibliography of useful gas dispersion books and reports.
14 Glossary of gas dispersion modeling terms.
Appendix A : Modeling Wind Generation of Particulates.
APPENDIX B TABLE OF PROPERTY VALUES FOR SPECIFIC CHEMICALS
Theory of Carbon Formation in Steam Reforming
Contents
1 Introduction
2 Underpinning Theory
2.1 Conceptualization
2.2 Reforming Reactions
2.3 Carbon Formation Chemistry
2.3.1 Natural Gas
2.3.2 Carbon Formation for Naphtha Feeds
2.3.3 Carbon Gasification
2.4 Heat Transfer
3 Causes
3.1 Effects of Carbon Formation
3.2 Types of Carbon
4 What are the Effects of Carbon Formation?
4.1 Why does Carbon Formation Get Worse?
4.1.1 So what is the Next Step?
4.2 Consequences of Carbon Formation
4.3 Why does Carbon Form where it does?
4.3.1 Effect on Process Gas Temperature
4.4 Why does Carbon Formation Propagate Down the Tube?
4.4.1 Effect on Radiation on the Fluegas Side
4.5 Why does Carbon Formation propagate Up the Tube?
5 How do we Prevent Carbon Formation
5.1 The Role of Potash
5.2 Inclusion of Pre-reformer
5.3 Primary Reformer Catalyst Parameters
5.3.1 Activity
5.3.2 Heat Transfer
5.3.3 Increased Steam to Carbon Ratio
6 Steam Out
6.1 Why does increasing the Steam to Carbon Ratio Not Work?
6.2 Why does reducing the Feed Rate not help?
6.3 Fundamental Principles of Steam Outs
TABLES
1 Heat Transfer Coefficients in a Typical Reformer
2 Typical Catalyst Loading Options
FIGURES
1 Hot Bands
2 Conceptual Pellet
3 Naphtha Carbon Formation
4 Heat Transfer within an Reformer
5 Types of Carbon Formation
6 Effect of Carbon on Nickel Crystallites
7 Absorption of Heat
8 Comparison of "Base Case" v Carbon Forming Tube
9 Carbon Formation Vicious Circle
10 Temperature Profiles
11 Carbon Pinch Point
12 Carbon Formation
13 Effect on Process Gas Temperature
14 How does Carbon Propagate into an Unaffected Zone?
15 Movement of the Carbon Forming Region
16 Effect of Hot Bands on Radiative Heat Transfer
17 Effect of Potash on Carbon Formation
18 Application of a Pre-reformer
19 Effect of Activity on Carbon Formation
Calculation of an Ammonia Plant Energy Consumption: Gerard B. Hawkins
Calculation of an Ammonia Plant Energy Consumption:
Case Study: #06023300
Plant Note Book Series: PNBS-0602
CONTENTS
0 SCOPE
1 CALCULATION OF NATURAL GAS PROCESS FEED CONSUMPTION
2 CALCULATION OF NATURAL GAS PROCESS FUEL CONSUMPTION
3 CALCULATION OF NATURAL GAS CONSUMPTION FOR PILOT BURNERS OF FLARES
4 CALCULATION OF DEMIN. WATER FROM DEMIN. UNIT
5 CALCULATION OF DEMIN. WATER TO PACKAGE BOILERS
6 CALCULATION OF MP STEAM EXPORT
7 CALCULATION OF LP STEAM IMPORT
8 DETERMINATION OF ELECTRIC POWER CONSUMPTION
9 DETERMINATION OF THE TOTAL ENERGY CONSUMPTION OF THE AMMONIA PLANT ISBL
10 ADJUSTMENT OF ELECTRIC POWER CONSUMPTION FOR TEST RUN CONDITIONS
11 CALCULATION OF AMMONIA SHARE IN MP STEAM CONSUMPTION IN UTILITIES
12 CALCULATION OF AMMONIA SHARE IN ELECTRIC POWER CONSUMPTION IN UTILITIES
13 DETERMINATION OF THE TOTAL ENERGY CONSUMPTION OF THE AMMONIA PLANT OSBL
14 DETERMINATION OF THE TOTAL ENERGY CONSUMPTION OF THE AMMONIA PLANT
Ammonia Plant Technology
Pre-Commissioning Best Practices
GBHE-APT-0102
PICKLING & PASSIVATION
CONTENTS
1 PURPOSE OF THE WORK
2 CHEMICAL CONCEPT
3 TECHNICAL CONCEPT
4 WASTES & SAFETY CONCEPT
5 TARGET RESULTS
6 THE GENERAL CLEANING SEQUENCE MANAGEMENT
6.6.1 Pre-cleaning or “Physical Cleaning
6.6.2 Pre-rinsing
6.6.3 Chemical Cleaning
6.6.4 Critical Factors in Cleaning Success
6.6.5 Rinsing
6.6.6 Inspection and Re-Cleaning, if Necessary
7 Systems to be treated by Pickling/Passivation
Ammonia Plant Technology
Pre-Commissioning Best Practices
Piping and Vessels Flushing and Cleaning Procedure
CONTENTS
1 Scope
2 Aim/purpose
3 Responsibilities
4 Procedure
4.1 Main cleaning methods
4.1.1 Mechanical cleaning
4.1.2 Cleaning with air
4.1.3 Cleaning with steam (for steam networks only)
4.1.4 Cleaning with water
4.2 Choice of the cleaning method
4.3 Cleaning preparation
4.4 Protection of the devices included in the network
4.5 Protection of devices in the vicinity of the network
4.6 Water flushing procedure
4.6.1 Specific problems of water flushing
4.6.2 Preparation for water flushing
4.6.3 Performing a water flush
4.6.4 Cleanliness criteria
4.7 Air blowing procedure
4.7.1 Specific problems of air blowing
4.7.2 Preparation for air blowing
4.7.3 Performing air blowing
4.7.4 Cleanliness checks
4.8 Steam blowing procedure
4.8.1 Specific problems of steam blowing
4.8.2 Preparation for steam blowing
4.8.3 Performing steam blowing
4.8.4 Cleanliness checks
4.9 Chemical cleaning procedure
4.9.1 Specific problems of cleaning with a chemical solution
4.9.2 Preparation for chemical cleaning
4.9.3 Performing a chemical cleaning
4.9.4 Cleanliness criteria
4.10 Re-assembly - general guideline
4.11 Preservation of flushed piping
PRACTICAL GUIDE ON THE REDUCTION OF DISCHARGES TO ATMOSPHERE OF VOLATILE ORGA...Gerard B. Hawkins
PRACTICAL GUIDE ON THE REDUCTION OF DISCHARGES TO ATMOSPHERE OF VOLATILE ORGANIC COMPOUNDS (VOCs)
FOREWORD
CONTENTS
1 INTRODUCTION
2 THE NEED FOR VOC CONTROL
3 CONTROL AT SOURCE
3.1 Choice or Solvent
3.2 Venting Arrangements
3.3 Nitrogen Blanketing
3.4 Pump Versus Pneumatic Transfer
3.5 Batch Charging
3.6 Reduction of Volumetric Flow
3.7 Stock Tank Design
4 DISCHARGE MEASUREMENT
4.1 By Inference or Calculation
4.2 Flow Monitoring Equipment
4.3 Analytical Instruments
4.4 Vent Emissions Database
5 ABATEMENT TECHNOLOGY
5.1 Available Options
5.2 Selection of Preferred Option
5.3 Condensation
5.4 Adsorption
5.5 Absorption
5.6 Thermal Incineration
5.7 Catalytic Oxidation
5.8 Biological Filtration
5.9 Combinations of Process technologies
5.10 Processes Under Development
6 GLOSSARY OF TERMS
7 REFERENCES
Appendix 1. Photochemical Ozone Creation Potentials
Appendix 2. Examples of Adsorption Preliminary Calculations
Appendix 3. Example of Thermal Incineration Heat and Mass Balance
Appendix 4. Cost Correlations
Getting the Most Out of Your Refinery Hydrogen PlantGerard B. Hawkins
Getting the Most Out of Your Refinery Hydrogen Plant
Contents
Summary
1 Introduction
2 "On-purpose" Hydrogen Production
3 Operational Aspects
4 Uprating Options on the Steam Reformer
4.1 Steam Reforming Catalysts and Tube Metallurgy
4.2 Oxygen-blown Secondary Reformer
4.3 Pre-reforming
4.4 Post-reforming
5 Downstream Units
6 Summary of Uprating Options
7 Conclusions
EMERGENCY ISOLATION OF CHEMICAL PLANTS
CONTENTS
1 Introduction
2 When should Emergency Isolation Valves be Installed
3 Emergency Isolation Valves and Associated Equipment
3.1 Installations on existing plant
3.2 Actuators
3.3 Power to close or power to open
3.4 The need for testing
3.5 Hand operated Emergency Valves
3.6 The need to stop pumps in an emergency
3.7 Location of Operating Buttons
3.8 Use of control valves for Isolation
4 Detection of Leaks and Fires
5 Precautions during Maintenance
6 Training Operators to use Emergency Isolation Valves
7 Emergency Isolation when no remotely operated valve is available
References
Glossary
Appendix I Some Fires or Serious Escapes of Flammable Gases or Liquids that could have been controlled by Emergency Isolation Valves
Appendix II Some typical Installations
Amine Gas Treating Unit - Best Practices - Troubleshooting Guide Gerard B. Hawkins
Amine Gas Treating Unit Best Practices - Troubleshooting Guide for H2S/CO2 Amine Systems
Contents
Process Capabilities for gas treating process
Typical Amine Treating
Typical Amine System Improvements
Primary Equipment Overview
Inlet Gas Knockout
Absorber
Three Phase Flash Tank
Lean/Rich Heat Exchanger
Regenerator
Filtration
Amine Reclaimer
Operating Difficulties Overview
Foaming
Failure to Meet Gas Specification
Solvent Losses
Corrosion
Typical Amine System Improvements
Degradation of Amines and Alkanolamines during Sour Gas Treating
APPENDIX
Best Practices - Troubleshooting Guide
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
VULCAN Series A2ST Advanced Alumina Support Technology
1. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST Advanced Alumina Support
Technology
HIGH PURITY ALUMINA CATALYST SUPPORTS
Manufactured By
CAMChem Crown Advanced Material Co.
2. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Table of contents
GBHE A2
ST Introduction 1
Product range 2
Process controls 3
Product TDS 4
CAMChem profile 5
3. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
GBHE A2
ST: Introduction
Mass transfer processes play an important role in the chemical and
petrochemical industry, in the oil and gas processing industry as well as in
environmental technology.
Supports and bed hold down media are often used in conjunction with packed
beds of catalyst and absorbents in syn gas plants.
These supports and hold down materials can come in a variety of shapes and
sizes dependent upon the application. GBHE A2
ST typical offering would be the
supply of inert material, either as a high purity alumina or an alumino-silicate, the
choice of which is dependent upon the reactor/converter conditions and gas
compositions. Both of these materials are considered inert and do not participate
in the reactions occurring within the vessel.
Support media requirements will vary depending on the vessel configuration. If a
mechanical support grid has been fitted then the support media requirements are
generally a shallow layer of supports of similar size to that of the catalyst,
although in some cases no support media will be used. When no mechanical
grids are present the supports requirement is generally a larger diameter support
used to fill the vessel head, topped with layers of smaller size material at the
catalyst interface. The additional cost of introducing the mechanical support grid
in vessel design usually negates its inclusion.
Hold down material can be employed to satisfy a number of functions dependent
upon the duty. Traditionally hold down material has been used to stabilize the
top of the catalyst bed to prevent pellet movement by the flowing gas, though
other applications include protection against solid foulants and liquid carryover.
Traditionally support and hold down media have been chemically inert, offering
only physical benefits. If the formulation of these materials were altered then this
media could be used to participate in the vessel reaction thereby increasing the
effectiveness of the reactor/converter conversion.
4. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
GBHE Vulcan Series A2
ST Advanced Alumina Support Technology:
◆ Alumina Balls
◆ Saddles
◆ Super Saddles
◆ Berl Saddles
◆ Raschig Rings
◆ Pall Rings
◆ Cross- Partition Rings
◆ Molecular Sieves
◆ Honeycombs
◆ Structured Packings
Vulcan Series A2
ST offer a range of high purity alumina (Al2O3) products for use
with catalysts and absorbents in syn gas plants.
These products are manufactured at PINGXIANG HUANGGUAN CHEMICAL
CO.,LTD. (CAMChem), A professional ISO certified manufacture for industry
tower packings. The factory covers an area of 40,000 square meters and the
annual output reaches 20,000 tons.
“Top-quality products and professional service, large stocks for urgent
delivery”
We can deliver our products wherever and whenever it is in urgent need. With
our order line, your shipment is just a phone call away.
More than 80% of their products are exported to America, Europe and the Middle
East.
5. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Process Control:
CAMChem’s Assurance of Quality
Pre-Qualification
CAMChem qualifies the optimum raw materials well in advance of
manufacturing. Extensive testing of core samples from the mine site identifies
areas of prime reserves to ensure a consistent supply far into the future.
Standard raw material tests are conducted in our laboratories as well as the
supplier’s confirming data accuracy.
Lot Qualification
Our prequalification procedures ensure that only the prime mining sites are
tapped; but we don’t stop here. Each shipment of raw materials must pass
additional testing before we accept it at the plant.
Blend Qualification
When our testing does reveal subtle changes in raw material composition, our
experimentally-derived knowledge of the relationships between material
characteristics and final product allows us to apply predictive process control to
fine-tune the blend at the front end to guarantee a consistent, high-quality
support media.
6. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Process Checks
CAMChem follows documented procedures at every stage of the manufacturing
cycle to ensure consistent final product quality.
Mixing Forming Drying Firing Screening
Packaging Shipping
Finished Product Tests
The following tests are performed on all products.
・Size
・Shape
・Chemical composition
・Strength
Additional tests are available on customer request
・Water absorption
・Thermal shock resistance
・Max. Use temperature
・Apparent Particle Density
・Attrition
・Elemental analysis
Certificate of Analysis can be provided on request.
7. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Alumino-Silicate Ceramic Support Balls
GBH Enterprises offer a range of alumino-silicate ceramic products for use with
catalysts and absorbents in syn gas plants.
Alumino-silicates will generally contain > 90 % by weight of Al2O3 and SiO2, with
the balance consisting of Ti2O, Fe2O3 and alkaline oxides such as CaO, MgO,
Na2O and K2O. Typical figures for these components have been determined at
25 wt% Al2O3, 69 wt% SiO2, Ti2O plus Fe2O3 at < 2.0 wt% and combined alkaline
oxides at 4.5wt%.
There will likely be some variability in coloration of alumino silicate materials due
to the different raw material clays sourced for manufacture. This coloring is
generally off white.
Product Duty
Alumino-silicates are significantly cheaper than the equivalent high purity alumina
materials and therefore are usually specified where the duty will not be affected
by silica-containing materials.
Alumino-silicate materials are generally used in all support and hold down
applications with the exception of high temperature steam environments such as
pre-reformer, secondary reformer and HTS duties. For clarity high purity alumina
materials should be used in steam environments at temperatures above 300°C.
In these conditions alumino-silicate balls should not be used as silica leaching
can occur leading to disintegration of the balls, silica poisoning of the installed
catalyst and possible fouling of downstream equipment such as heat exchangers.
VULCAN Series A2
ST-CB23
Typical chemical composition
8. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Typical physical properties
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
9. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-CB23
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
10. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB52
Typical chemical composition
Typical physical properties
11. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB52
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
12. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB70
Typical chemical composition
Typical physical properties
13. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB70
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
14. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB92
Typical chemical composition
Typical physical properties
15. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST-AB92
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
Alpha-alumina
Alpha-alumina is the most stable phase of the various aluminas available and as
such provides excellent thermal stability. This guarantees that the VULCAN
A2
ST products can withstand elevated temperatures without affecting their
physical integrity.
The alpha alumina ball is fired to 1550o
C, a temperature high enough to sinter
the alumina, ie to create a strong alumina bond.
The sintering process can be defined as the process of heating a compacted
powder to a temperature lower than that necessary to produce a liquid phase, but
sufficiently high for a solid state reaction or inter-crystallization to take place, so
that the fired body acquires strength.
16. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
High Purity Alumina
GBH Enterprises offer a range of high purity alumina (Al2O3) products for use
with catalysts and absorbents in syn gas plants.
High purity aluminas will generally contain > 99 % by weight Al2O3 and < 0.2 %
wt silica maximum, with typical figures for SiO2 of 0.1 wt%. Other components
include TiO2 at < 0.5 % wt and Fe2O3 at < 0.2 wt%, and minor alkaline oxides
such as CaO, MgO, Na2O and K2O making up the balance.
High purity aluminas are preferred over alumino-silicate ceramics when there is a
potential for silica to be leached from the alumino-silicate by the action of steam
at elevated temperature. Examples of applications in which alumina is specified
include pre-reformers, secondary reformers and high temperature shift
converters.
Note: Inclusion in Medium Temperature Shift (MTS), Isothermal Shift
(ITS)and Sour Shift is also recommended if the temperature exceeds 300
o
C.
High purity alumina balls should be used in steam environments at
temperatures above 300 o
C. In these conditions alumino-silicate balls
should not be used as silica leaching can occur, leading to disintegration
of the balls and silica poisoning of the installed catalyst.
High purity aluminas can be used in other duties other than high temperature
steam environments though the cost is often prohibitive when compared with the
much cheaper alumino-silicate materials.
VULCAN A2
ST 99HD high density alpha-alumina balls are universally accepted
for a range of chemical and petrochemical applications. The physical
characteristics and low silica content give assured benefits in varied catalytic
applications.
Typical Chemical Composition:
17. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Typical physical properties
18. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN Series A2
ST 99
Sizes, size tolerances, packing density, specific surface, void fraction and
compressive strength
BENEFITS
THERMAL RESISTANCE:
The excellent refractory properties of VULCAN A2
ST pure
alumina products give them very high thermal shock
resistance and the ability to withstand extreme process
temperatures. In addition this means that steam and heat
treatment for regenerating catalysts will not erode this
media.
19. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST 99 pure alumina balls are manufactured with a monolithic rather
than a layered structure. This method of manufacture eliminates spalling and
delamination thus avoiding the incidence of fine chips and splinters plugging
beds.
HIGH PURITY:
VULCAN A2
ST 99 pure alumina balls typically contain less than 0.2% Silica
dioxide and are free of chloride, sulphur, boron, leachable iron and other catalytic
poisons. The absence of excess silica means that users will not suffer from
costly maintenance or shutdowns due to silica migration, also making it the ideal
support media for the severe high temperature, high steam environment in the
secondary reformers of ammonia plants.
LOW PRESSURE DROP:
VULCAN A2
ST 99 alumina balls are manufactured with a highly consistent shape
and size. This results in a lower pressure drop than that associated with the
random sized and shaped particles of screened media.
CRUSH STRENGTH:
The contamination of catalysts is minimized by the excellent resistance to
erosion and attrition exhibited by VULCAN A2
ST 99 products.
The very high crush strength associated with VULCAN A2
ST products allows the
use of deep beds. To measure crush strength CAMChem employs the standard
test of crushing alumina balls between 2 flat steel plates.
CAMChem also manufactures VULCAN A2
ST 99 HDL which are irregular
lumps, the preferred media by some ammonia plant operators for secondary
reformer duty. The high density and low surface area of the VULCAN A2
ST pure
alumina catalyst support media ensures chemical inertness and a long service
life.
20. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST APPLICATIONS
VULCAN A2
ST is used in a wide range of refinery and petroleum applications.
One common use is in the role of support material supplying a sustainable low
pressure drop across a catalyst reactor vessel for prolonged periods of time. It is
also utilized in its high-density form as a hold down layer protecting active
catalysts from turbulent flows, ensuring a constant flow distribution throughout
the catalyst bed. This application is particularly useful in the prevention of bed
lifting in vessels designed for up-flow duty.
VULCAN A2
ST is produced in a range of sizes from 3mm to 75mm diameter and
can be used in graded support systems to ensure an even distribution of flow
from vessel inlet to catalyst surface.
Specific examples of vessels utilizing VULCAN A2
ST alumina include:
High temperature shift catalyst support and hold
down
CRG Type pre-reformer catalyst support and hold
down
Hydrocracker hold down
Hydrotreater hold down (for jet fuel, diesel,
naphtha)
Alkylation unit support
Claus catalyst support
Secondary reformer hold down
Methanol synthesis catalyst support
21. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Other areas in which high purity VULCAN A2
ST is include:
Powerformer reactors
HDPE units
Styrene plants
Cumene units
Ethylene Oxide reactors
Acetaldehyde units
22. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
NEW From CAMChem
VULCAN A2
ST Series Ceramic Knob -
CATALYST PROTECTION MEDIA
The life cycle of numerous catalytic
processes is often limited not by
catalyst activity but by increased
pressure drop which can lead to
reduced production yields, early
catalyst replacement and
unscheduled plant shutdown.
Hydrotreating and catalytic reforming plants are increasingly susceptible as
associated economics demand processing of more “bottom of the barrel”
feedstocks. Increase in pressure drop by plugging of the catalyst bed usually at
the inlet of down-flow reactors can result from a number of sources:
* Heavy metals contained within the process feedstocks e.g. nickel and
vanadium.
* Tramp iron contamination. formed as corrosion products within the pipe-
work.
* Scale and carbon deposits from heaters and heat exchangers carried
over to the catalyst beds.
* Feedstock particulates or from attrition of upstream catalysts which are
not removed due to in-efficient filtering.
Particulates may be deposited in the voids between individual catalyst particles
or may directly reduce catalyst activity, by plugging porosity and blinding access
to active metal sites within the internal pore structure. A simple and cost-effective
solution is to use a layer of shaped highly porous VULCAN A2
ST Series
Ceramic Knobs on top of the catalyst bed.
The Ceramic Knobs act as a hold-down layer and improve gas flow distribution,
prevent increases in pressure drop and protect the active catalyst against
plugging and deactivation. Ceramic Knobs have a lower initial pressure drop
and larger void volume than traditional ceramic balls and as a consequence can
tolerate a higher degree of inter-particulate blockage before reaching a limiting
pressure drop constraint.
23. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Ceramic Knob is a specially developed shape with high macro-
pore content and maximized pore volume to trap and filter extraneous material
present in the feedstock. The Knob shape provides a higher void fraction than
conventional raschig rings and thus a lower resistance to flow as well as an
enhanced geometric surface area for efficient particulate removal. VULCAN
A2
ST Ceramic Knob is manufactured in alpha-alumina and is characterized by
high mechanical strength and excellent attrition resistance.
VULCAN A2
ST Ceramic Knob
Available as standard sizes [16x16x7 / 16x10x7 / 16x7x7mm ] Knobs, other sizes
available on request.
24. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Activated Alumina Balls
Molecular Formula: Al2O3. n H2O (0<n≤0.8)
Typical physical properties
Ceramic Random Packings
CAMChem ceramic tower packings are fired at high temperature and have
excellent mechanical strength, abrasion and acid resistance; it can resist the
corrosion of various inorganic acids, organic acids and organic solvents
Except hydrofluoric and can be adapted to high or low temperature condition, the
packing can be used in drying columns, absorbing columns, cooling towers, etc.
25. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Ceramic Random Packings
Typical Chemical Composition
Typical physical properties
Specific properties of Ceramic Berl Saddle
26. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Specific properties of Ceramic Cross Partition Rings
Specific properties of Ceramic Pall Rings
Specific properties of Ceramic Super Saddles
27. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Specific properties of Ceramic Raschig Rings
28. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Carbon Raschig Ring
Are fully carbonized tubular rings used for tower packing.
They have the properties of corrosion resistance, thermal
shock resistance and high temperature stability.
Carbon Raschig Rings provide a large surface area for
the interaction between the material.
Availability
We can produce sizes ranged from 13mm to 80mm in order to meet all packed
tower requirements.
Features
1. Low coefficient of thermal expansion resists damage caused by severe
shocks.
2. May be used in most acids, alkali’s and solvent environments.
3. Light in weight with high mechanical strength, having no soluble bond.
4. Long-life packing with high temperature operation capabilities.
5. Used in chloride-hydrochloric mixtures and phosphoric acid.
6. Fully carbonized to eliminate extractable impurities.
Typical Specifications:
29. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Molecular sieves
VULCAN A2
ST PHC-3A
Application: mainly used for unsaturated
hydrocarbon materials, such as pyrolysis gas
ethylene, propylene, Butadiene, acetylene and deep
drying of natural gas, may also be used for the drying
of polar liquids (such as ethanol liquids), liquefied
petroleum gas and solvent.
Our 3A molecular sieves, are used in large ethylene plant as desiccants, the
water content of the gas can be reduced below 1PPM (dew point<-70℃).
Regeneration: PHC-3A molecular sieves can be regenerated and reused after
being swept by the heated dry gas, with minimal adsorption of undesirable
components, then the absorbed water removed and molecular sieves
regenerated.
The molecular sieves regeneration level depends on the regeneration time,
temperature and humidity.
30. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST PHC-4A
Application: PHC-4A molecular sieves widely used in the drying of gas and
liquids, such as the drying of pyrolysis gas, natural gas, refrigerants, LPG and
naphtha, kerosene, diesel, transformer oil, and the preparation of argon gas,
purification and desulfurization.
PHC-4A molecular sieves can adsorb H2O, NH3, CO, CO2, SO2, H2S, CH3OH,
C 2H5OH, C3H6, C2H4, C2H2, etc.
Regeneration: 4A molecular sieves can be regenerated and reused after being
swept by the heated dry gas with minimal adsorption of undesirable
components,, then the absorbed water removed and molecular sieves
regenerated. The molecular sieves regeneration level depends on the
regeneration time, temperature and humidity.
31. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST PHC-5A
PHC-5A is an alkali alumino silicate; it is the calcium form of the Type A crystal
structure. Type 5A has an effective pore opening of 5 angstroms (0.5 nm). It will
adsorb molecules with a kinetic diameter of less than 5 Angstrom and exclude
those larger.
It is especially suitable for PSA adsorber applications where it may be used for
the separation of normal- and iso paraffins (C4 to C6 species), in PSA hydrogen
purification and in oxygen concentrators.
Application
The strong ionic forces of the divalent calcium ion makes it an excellent
adsorbent to remove water, CO2, H2S from sour natural gas streams, while
minimizing COS formation. Light mercaptans are also adsorbed.
It is also used for the separation of normal- and iso paraffins.
Production of high purity N2, O2, H2 and inert gases from mixed gas streams.
32. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST PHC-10X
Application: 10X molecular sieve is mainly used for gas
adsorption and refining liquid paraffin, removal of sulfur
compounds, nitrogen compounds, organic acids, aromatic
hydrocarbons, etc.
Also used to isolate kerosene and aromatic hydrocarbons
in petrol fractions, also used to isolate cycloalkanes from
petroleum distillates.
Regeneration: desorption by vapor, then long-term recycling, after reusing some
time, using the vapor-air mixing to scorch and regeneration. Regeneration level
depends on the burning temperature, process time.
VULCAN A2
ST PHC-CUX
Application:
PHC-CUX molecular sieves are mainly used for
deodorizing applications. PHC-CUX desorbs
hydrogen sulfide, mercaptans, Thiols and disulfides
from gasoline, aviation fuel, lamp oil, propane,
butane and pentane, butylenes, liquefied petroleum
gas, etc.
33. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Regeneration:
PHC-CUX molecular sieves can be continually regenerated.
The deodorizing efficacy can be maintained, provided enough oxygen is in the
feeds stream, facilitating the catalytic oxidation process.
VULCAN A2
ST PHC-13X
Application:
PHC-13X molecular sieves are mainly used for gas drying,
purifying of raw gas in the air separation oxygen production
plant, desorbs the H2O、CO2、C2H2 from the air, with the
exit H2O level below 2ppm, CO2 below 1ppm,C2H2 circa
zero, also can be used for the desulfurization of liquid
petroleum hydrocarbons and natural gas, removing H2S and
mercaptan, separation of kerosene and the
aromatic hydrocarbons in gasoline fractions.
Regeneration: PHC-13X molecular sieves can be regenerated and reused after
being swept by the heated dry gas without being adsorption components, then
the absorbed water removed and molecular sieves regenerated. The molecular
sieves regeneration level depend on the regeneration time, temperature and
humidity
34. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Package:
135kg steel drum, inside vacuum bag packing, other packages request by the
customers.
Attention:
Avoid damp and pre-adsorption of organic before running, or must to be
reactivated.
35. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
VULCAN A2
ST Honeycomb ceramics
Honeycomb ceramic is a new developed porous industrial ceramic; it has the
properties of corrosion resistances, high specific surface area, low resistance,
low thermal expansion coefficient, good thermal conductivity and thermal-shock
resistance performance, widely used in the industrial field. Using the advanced
production technology and strict management, we have bath produce the
honeycomb ceramics series; also we can produce according customers’
requirements.
★ Material: Mullite, Cordierite, Alumina, Mullite Zirconium, Mullite Corundum,
Corundum and other materials.
★Size: According to customers’ requirements.
★ Hole shape: square, hexagon, rectangular, circular, triangle, diamond.
★ Holes number: According to customers’ requirements. (1~400 holes/square
inch)
Application of VULCAN A2
ST Honeycomb Ceramics
Can be used as a catalyst carrier for clean-up of automobile tail gas, a carrier for
various purification systems, a heat retainer in the heat accumulation burner in
metallurgy industry, used as structured packing, gas burning distribution plate.
36. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Chemical Composition of VULCAN A2
ST Honeycomb Ceramics
37. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Honeycomb Ceramics- Heat Exchanger
Honeycomb Ceramics- Heat Exchanger is the key component in the HTAC
technology, widely used in the industry.
HTAC technology:
38. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Specification and type of Honeycomb Ceramics
Mechanical property index of Honeycomb Ceramics
39. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Commercial Request Form
Company Name:
Address:
Fax Number:
Telephone Number:
Contact Name:
Contact E-mail:
End User Company Name & Address:
(if different from above)
Plant Name:
Plant Number:
Duty:
Current Catalyst Grade Used:
Catalyst Grade requested (if known):
Catalyst Volume as charged in vessel:
M3 or ft3?
Catalyst Volume Requested
(if different from above) M3 or ft3?
Delivery Terms:
(eg EXW, FOB, CIP, CIF)
Delivery Location:
Preferred Catalyst Delivery Date:
Preferred payment terms:
Required Quote Response Date:
Preferred Packaging
(Drums/Big Bags/socks/Unidense bags/other)
Included services required:
(Charging/reduction assistance/other)
Quote for disposal of spent catalyst required?
Budget/ Fixed Price Quote?:
Any Special Requirements?
Please fax to our local Agent or our head office on +52 55 2614 8349, FAO MCZ
40. Refinery Process Stream Purification Refinery Process Catalysts Troubleshooting Refinery Process Catalyst Start-Up / Shutdown
Activation Reduction In-situ Ex-situ Sulfiding Specializing in Refinery Process Catalyst Performance Evaluation Heat & Mass
Balance Analysis Catalyst Remaining Life Determination Catalyst Deactivation Assessment Catalyst Performance
Characterization Refining & Gas Processing & Petrochemical Industries Catalysts / Process Technology - Hydrogen Catalysts /
Process Technology – Ammonia Catalyst Process Technology - Methanol Catalysts / process Technology – Petrochemicals
Specializing in the Development & Commercialization of New Technology in the Refining & Petrochemical Industries
Web Site: www.GBHEnterprises.com
Information contained in this publication or as otherwise supplied to Users is believed to be accurate and correct
at time of going to press, and is given in good faith, but it is for the User to satisfy itself of the suitability of the
product for its own particular purpose. GBHE gives no warranty as to the fitness of the product for any particular
purpose and any implied warranty or condition (statutory or otherwise) is excluded except to the extent that
exclusion is prevented by law. GBHE accepts no liability for loss or damage resulting from reliance on this
information. Freedom under Patent, Copyright and Designs cannot be assumed.