Overview of VoIP (Voice over IP) and FoIP (Fax over IP) technologies like Session Initiation Protocol and H.323.
Even though voice over IP (VoIP) was hailed as a technological innovation, the idea to transport real-time traffic over TCP/IP networks was not new back in the 1990s when VoIP started being deployed in networks. Chapter 2.5 of the venerable RFC793 (TCP) shows both data oriented application traffic as well as voice being transported over IP based networks.
Nevertheless, VoIP puts high demands on signal and protocol processing capabilities so it became possible at reasonable costs only in the 1990s.
VoIP can be roughly split into two main functions. Signaling protocols like SIP (Session Initiation Protocol), H.323 and MGCP/H.248 are used to establish a conference session and the data path for transporting real-time voice data packets. SIP has largely supplanted H.323 in recent years to its simpler structure and packet sequences. MGCP and H.248 are mostly used in carrier backbone networks.
Protocols like RTP (Real Time Protocol) transport voice packets and provide the necessary information for receivers to equalize packet flow variations to provide a smooth playback of the original voice signal.
Voice codecs are one of the core functions of the data path. Voice compression reduces the bandwidth required to transport voice over an IP based network. Compression may be less of a concern in local area networks with gigabit speeds, on slower links like 3G (UMTS, LTE) it still makes a lot of sense.
The algorithms used in different codecs make use of various characteristics of the characteristics of human speech recognition. Redundant information is removed from the signals thus slightly reducing the quality, but greatly reducing the required bandwidth.
In VoIP networks, the echo problem is typically compounded by the increased delay incurred by packetization of voice signals. To counteract the echo problem, VoIP gear (hard phones, soft phones, gateways) include echo cancelers to remove echo signals from the transmit signal.
To transport facsimile over an IP based network, even more technology is needed. Facsimile protocols are very susceptible to delay and delay variation and thus need more compensation algorithms. Protocols like T.38 terminate facsimile protocols like T.30 (analog facsimile) and transport the fax images as digitized pictures over IP based networks.
VoLTE Voice over LTE Explained - Complete End to End VoLTE Overview - What is...Vikas Shokeen
Complete End to End Tutorial on Fundamentals & Basics of VoLTE , IMS Technology & VoLTE Overview ( Voice Over LTE )
- What is VoLTE
- Network Evolution to VoLTE
- How to Enable VoLTE in handset
- Differences between VoLTE & CSFB Call
- Voice call in LTE & VoLTE Networks
- Evolution of Voice Call
- VoLTE - Benefits for Users
- VoLTE - Benefits for Operators
- VoLTE Challenges
- Congestion handling for VoLTE Traffic
VoLTE Voice over LTE Explained - Complete End to End VoLTE Overview - What is...Vikas Shokeen
Complete End to End Tutorial on Fundamentals & Basics of VoLTE , IMS Technology & VoLTE Overview ( Voice Over LTE )
- What is VoLTE
- Network Evolution to VoLTE
- How to Enable VoLTE in handset
- Differences between VoLTE & CSFB Call
- Voice call in LTE & VoLTE Networks
- Evolution of Voice Call
- VoLTE - Benefits for Users
- VoLTE - Benefits for Operators
- VoLTE Challenges
- Congestion handling for VoLTE Traffic
Internet protocol (VoIP) is the technology of digitizing sound, compressing it, breaking it up into data packets, and sending it over an IP network.The conventional technique used for sending voice is PSTN (public switched telephone network) . As data traffic has higher speed than telephone traffic, so what we do most of the time we prefer to send voice over data networks. Voice over internet protocol (VoIP) is a method of telephone communication over a data network.
PSTN is the global collection of interconnects originally designed to support circuit switched voice communication.
The PSTN provides traditional Plain Old Telephone Service (POTS), also known as “landline phone” service , to residences & many other establishments.
Parts of the PSTN are also utilized for DSL, voIP & other Internet based network technologies.
Introduction to Diameter: The Evolution of SignalingPT
As telecommunications networks have advanced, so have the signaling procedures. This introduction to Diameter gives you an overview of the evolution of signaling.
LTE network: How it all comes together architecture technical posterDavid Swift
Mobile network operators that want to deploy LTE now want to do so on their own terms. They want to roll out ultrafast mobile broadband safe in the knowledge that one vendor’s solution will work efficiently with another, while delivering the high level of service that subscribers expect. A standards-based network will ensure the goal is met and help drive down cost for operators, but understanding how to pull it all together can be a challenge. So how does it all come together?
Introduction of PS Core Network Elements and little bit of EPC/LTE Network. This is introductory slides pack for a 10 class/slides set for detail introduction of 2G/3G and LTE PS Core Network.
Presented by: Muhammad Yeasir Arafat
ElastixWorld 2013
Today, the session initiation protocol (SIP) is the predominant protocol for IP Telephony Signalling. The intention of this paper is to present an overview of IP Telephony security issues - both current and future – focusing on SIP. We start by presenting some fundamental differences between IP Telephony and the public switched telephone network (PSTN). We then look at specific problems for SIP signalling that arise from these differences. We summarize current activities regarding SIP security, including recent developments in the research community and standardization efforts within the IETF. Finally, the paper gives an outlook on the security issues of IP Telephony.
Download paper at: http://elx.ec/ssiipt
Presented by Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO, BT at IET "Towards 5G Mobile Technology – Vision to Reality" seminar on 25th Jan 2017
Shared with permission
VoLTE Basic callflows in IMS network v2 - includes Registration, Basic VoLTE Call, SDP, Interconnect, Roaming, highlights important SIP headers for session routing and user identities.
Internet protocol (VoIP) is the technology of digitizing sound, compressing it, breaking it up into data packets, and sending it over an IP network.The conventional technique used for sending voice is PSTN (public switched telephone network) . As data traffic has higher speed than telephone traffic, so what we do most of the time we prefer to send voice over data networks. Voice over internet protocol (VoIP) is a method of telephone communication over a data network.
PSTN is the global collection of interconnects originally designed to support circuit switched voice communication.
The PSTN provides traditional Plain Old Telephone Service (POTS), also known as “landline phone” service , to residences & many other establishments.
Parts of the PSTN are also utilized for DSL, voIP & other Internet based network technologies.
Introduction to Diameter: The Evolution of SignalingPT
As telecommunications networks have advanced, so have the signaling procedures. This introduction to Diameter gives you an overview of the evolution of signaling.
LTE network: How it all comes together architecture technical posterDavid Swift
Mobile network operators that want to deploy LTE now want to do so on their own terms. They want to roll out ultrafast mobile broadband safe in the knowledge that one vendor’s solution will work efficiently with another, while delivering the high level of service that subscribers expect. A standards-based network will ensure the goal is met and help drive down cost for operators, but understanding how to pull it all together can be a challenge. So how does it all come together?
Introduction of PS Core Network Elements and little bit of EPC/LTE Network. This is introductory slides pack for a 10 class/slides set for detail introduction of 2G/3G and LTE PS Core Network.
Presented by: Muhammad Yeasir Arafat
ElastixWorld 2013
Today, the session initiation protocol (SIP) is the predominant protocol for IP Telephony Signalling. The intention of this paper is to present an overview of IP Telephony security issues - both current and future – focusing on SIP. We start by presenting some fundamental differences between IP Telephony and the public switched telephone network (PSTN). We then look at specific problems for SIP signalling that arise from these differences. We summarize current activities regarding SIP security, including recent developments in the research community and standardization efforts within the IETF. Finally, the paper gives an outlook on the security issues of IP Telephony.
Download paper at: http://elx.ec/ssiipt
Presented by Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO, BT at IET "Towards 5G Mobile Technology – Vision to Reality" seminar on 25th Jan 2017
Shared with permission
VoLTE Basic callflows in IMS network v2 - includes Registration, Basic VoLTE Call, SDP, Interconnect, Roaming, highlights important SIP headers for session routing and user identities.
Introduction to VoIP, 2nd chapter of "Unified Communications with Elastix" Vol.1
We recommend to read the chapter along with the presentation.
http://elx.ec/chapter2
Voice over Internet Protocol (VoIP) is a general term for a family of transmission technologies for delivery of voice communications over IP networks such as the Internet or other packet-switched networks.
The Art of VoIP Hacking - Defcon 23 WorkshopFatih Ozavci
VoIP attacks have evolved, and they are targeting Unified Communications (UC), commercial services, hosted environment and call centres using major vendor and protocol vulnerabilities. This workshop is designed to demonstrate these cutting edge VoIP attacks, and improve the VoIP skills of the incident response teams, penetration testers and network engineers. Signalling protocols are the centre of UC environments, but also susceptible to IP spoofing, trust issues, call spoofing, authentication bypass and invalid signalling flows. They can be hacked with legacy techniques, but a set of new attacks will be demonstrated in this workshop. This workshop includes basic attack types for UC infrastructure, advanced attacks to the SIP and Skinny protocol weaknesses, network infrastructure attacks, value added services analysis, Cdr/Log/Billing analysis and Viproy use to analyse signalling services using novel techniques. Also the well-known attacks to the network infrastructure will be combined with the current VoIP vulnerabilities to test the target workshop network. Attacking VoIP services requires limited knowledge today with the Viproy Penetration Testing Kit (written by Fatih). It has a dozen modules to test trust hacking issues, information collected from SIP and Skinny services, gaining unauthorised access, call redirection, call spoofing, brute-forcing VoIP accounts, Cisco CUCDM exploitation and debugging services using as MITM. Furthermore, Viproy provides these attack modules in the Metasploit Framework environment with full integration. The workshop contains live demonstration of practical VoIP attacks and usage of the Viproy modules.
In this hands-on workshop, attendees will learn about basic attack types for UC infrastructure, advanced attacks to the SIP protocol weaknesses, Cisco Skinny protocol hacking, hacking Cisco CUCDM and CUCM servers, network infrastructure attacks, value added services analysis, Cdr/Log/Billing analysis and Viproy VoIP pen-test kit to analyse VoIP services using novel techniques. New CDP, CUCDM and Cisco Skinny modules and techniques of Viproy will be demonstrated in the workshop as well.
la voix sur IP est clairement la voix dominante de l'avenir il existe beaucoup des applicatifs VoPI offrant des prestations correctes mais ces derniers vont énormément évoluer dans les années à venir en raison de la montée en puissance des débits de plus en plus impotants proposés sur les réseaux locaux et sur l'internet .
Focusing on the physical layer of the 5G network, new methodologies, new problems facing the network and solutions for each problem.
topics are:-
Channel Models, Channel Coding, Multiple Access, Smart Antenna, Massive MIMO & Beamforming, Network Architecture, Frame structure & Numerology
addition: exploring the new trends that might be done in the future
A presentation on the physical layer basics of ADSL. I presented this to a couple of colleges in the southeast as a guest lecturer, and to the local chapter of the IEEE Signal Processing Society.
The low efficiency caused by the high amount of small packets present in the network can be alleviated by means of packet aggregation.
There are some situations in which multiplexing a number of small packets into a bigger one is desirable. For example, a number of small packets can be sent together between a pair of machines if they share a common network path. Thus, the traffic profile can be shifted from small to larger packets, reducing the network overhead and the number of packets per second to be managed by intermediaterouters.
This presentation describes Simplemux, a protocol able to encapsulate a number of packets belonging to different protocols into a single packet. It includes the "Protocol" field on each multiplexing header, thus allowing the inclusion of a number of packets belonging to different protocols (multiplexed packets) on a packet of another protocol (tunneling protocol).
In order to reduce the overhead, the size of the multiplexing headers is kept very low (it may be a single byte when multiplexing small packets).
The final thesis defense presentation for my master's project. The purpose of this thesis was to compare alternative wireless links for transfer of data from sink motes of remote wireless sensor networks to a central repository. A few different protocol stacks to be implemented in the WSN (Wireless Sensor Network) uplink gateway and along with them a few implementation environments based on open source software and low-power hardware were discussed. To facilitate measurements and experimental validation, some of the alternatives have been implemented. Experiments have been made using two of the amateur radio bands, the 144 MHz band (VHF) and the 433 MHz band (UHF). The parameters studied include throughput, range, power-requirements, portability and compatibility with standards.
Using different protocol stacks, different bands and sometimes different hardware 5 solutions were designed, implemented, tested and experimented with. Namely these solutions are called Radiotftp, Radiotftp_process, Radiotunnel, Soundmodem and APRX in this thesis.
After the implementation phase, there was an open-field experimentation to measure the aforementioned parameters. The tests were conducted in Riddarholmen, Stockholm of Sweden. These open-field experiments helped us obtain real-life measurements about power, throughput, stability etc. Experiments were conducted in a range of from a minimum of 2 meters to a maximum of 2.1 kilometers with some of the solutions.
In the end, some of these solutions proved themselves to be viable for the purpose of data communications for remote wireless sensor networks. Radiotftp gave the best throughput in both bands where it proved itself to be difficult to develop further applications. Radiotftp_process removed the necessity for a Linux running gateway machine but it was unable to work with faster baud rates. Radiotunnel opened up the path for a range of network applications to use radio links, but it also proved that it was unstable. On the other hand Soundmodem and APRX which were based on standard and open-source software proved that they were stable but rather slow. It was proven that every approach to problem has its advantages and disadvantages from different aspects such as throughput, range, power-requirements, portability and compatibility.
LPWAN Technologies for Internet of Things (IoT) and M2M ScenariosPeter R. Egli
Rapid technological advances in the past made possible the miniaturization of network devices to meet the cost and power consumption requirements in IoT and M2M scenarios. What is missing in this picture is a radio technology with both long range capability and a very low cost footprint. Existing radio technologies such as 3G/4G or Short Range Radio do not aptly meet the requirements of IoT scenarios because they are either too expensive or are not able to provide the required range. Other wireless technologies are geared towards high bandwidth which is in most cases not a requirement for IoT.
Emerging LPWAN technologies such as ETSI LTN or LoRAWAN are poised for filling the gap by providing long range (up to 40km) and low power connectivity. These technologies allow low cost radio devices and operation thus enabling scaling up IoT applications.
Networking is a term that subsumes various technologies and protocols for transferring data from one place to another by means of a transmission network.
While every technology like TCP/IP, Ethernet, SDH, GSM, VSAT etc. has its own zoo of terms and acronyms, there are more fundamental concepts and terms common to the different technologies and protocols.
The goal of this document is to explain the gist of the these more common networking terms and concepts. These explanations complement typical glossaries with illustrations.
Transaction Processing Monitors represent an early type of middleware that is still widely used for performing distributed transactions involving multiple databases.
Usually TPMs employ the two phase commit protocol that ensures ACID properties (Atomicity, Consistency, Isolation, Durability) as in relational databases.
Business Process Model and Notation (BPMN)Peter R. Egli
Overview of Business Process Model and Notation (BPMN) language for modeling business processes.
When implementing business processes, there is usually a large gap between the business semantics (process, activity, participant, orchestration, choreography, data items etc.) and the technical implementation languages (REST, WSDL, transport protocol, message bus etc.). BPMN has the goal of bridging this gap by providing a standard notation for describing business processes plus a standard mapping of this notation into an executable description language like WSBPEL. The BPMN 2.0 standard even allows executing BPMN business models directly without the need of a translation.
The core notation elements of BPMN are flow objects to model activities and events, data objects to model pieces of information, connecting objects to model information and control flow, and swimlanes to model process participants. Four different diagram types allow the modeling of processes, process choreographies, collaboration between participants and conversations.
Overview of Microsoft .NET Platform and Components. .NET is Microsoft's managed code platform. .NET comes with a wealth of libraries for communication (WCF), graphical user interfaces (WPF, WinForms), database access (ADO.NET, SQL) etc.
Overview of Cloud Computing, Infrastructure as a Service, Platform as a Service, Software as a Service.
Cloud computing means transferring ICT resources (servers, hosts, applications, databases, platforms etc.) to a cloud service provider (CSP) with the goal of reducing capital expenditures (CapEx).
Cloud computing differs from legacy hosting services in that CSPs offer standardized services on a massive scale which results in economy-of-scale effects thus further reducing operating expenses (OpEx).
Different cloud models such as public, private and hybrid clouds address different customer needs.
The 3 categories for the functional level of cloud services are IaaS (Infrastructure as a Service),
PaaS (Platform as a Service) and SaaS (Software as a Service). Countless models emerge almost daily such as MaaS (Management as a Service), BaaS (Backend as a Service) and NaaS (Network as a Service).
To accommodate increases in processing power, cloud services offer the possibility to scale-up or scale-out.
MQTT - MQ Telemetry Transport for Message QueueingPeter R. Egli
Description of message queueing (MQ) protocol for the transport of telemetry data (MQTT - MQ Telemetry Transport).
MQTT is a protocol designed to fit the needs of Internet of Things scenarios. It is lightweight and efficient, but still affords all the features required for reliable messaging between wireless sensor / actor nodes and applications. MQTT decouples producer and consumer of data (sensors, actors and applications) through message brokers with publish / subscribe message queues called topics. MQTT supports different levels of quality of service thus providing the flexibility to adapt to the different needs of applications.
Further features like will and retain messages make MQTT well suited for sensor network scenarios as well as for lightweight enterprise messaging applications.
Open source implementations like Eclipse paho provide ample code for integrating MQTT in your own applications.
Enterprise Application Integration TechnologiesPeter R. Egli
Overview of Enterprise Application Integration Technologies.
Enterprise Application Integration, or EAI in short, aims at integrating different applications into an IT application landscape. Traditionally, EAI was understood as using the same communication infrastructure by all applications without service-orientation in mind. This meant that the benefits of a shared infrastructure were limited while driving up costs through additional integration platforms.
Service Oriented Architectures (SOA) brought a new paradigm by decomposing applications into reusable and shareable services. Service orientation requires careful design of services. A hierarchic scheme of services may help to define a suitable service decomposition.
While SOA is technically based on big web service technologies, namely SOAP, WSDL and BPEL, WOA or Web Oriented Architecture stands for the lightweight service paradigm. WOA makes use of REST-based technologies like JSON and HTTP.
In many cases, an Enterprise Service Bus (ESB) is used as an infrastructure element to achieve the technical integration of the services. The ESB core functions like message routing, filtering and transformation provide the mediation services required to integrate heterogeneous application landscapes.
Overview of Microsoft .Net Remoting technologyPeter R. Egli
Overview of Microsoft .Net Remoting technology for inter-object communication.
.Net remoting is a .Net-based distributed object technology for accessing
.Net objects that reside in a different application domain (different process
on the same machine or different process on another machine).
.Net shares concepts with DCOM (Distributed Component Object Model), but
simplifies the communication with regard to transport ports and programmatic
model.
Microsoft's newer WCF (Windows Communication Foundation) provides a unified communication and programming model thus replacing older technologies like .Net remoting and DCOM in many applications.
Overview of Android NDK (Native Development Toolkit).
Android application development is primarily done with the Android SDK.
Apps are written in Java thus benefitting from the high-level constructs
of the managed environment as well as the wealth of functionality provided
by the Android application platform.
However, sometimes it is necessary to implement certain functionality natively
in C++, e.g. when access to hardware is required or 3rd party stacks have to
be included that are only available as C++ code.
The NDK is a lightweight development toolkit for writing native applications
and libraries that can interwork with Java application code.
Overview of SCTP (Stream Control Transmission Protocol)Peter R. Egli
Overview of SCTP (Stream Control Transmission Protocol), outlining the main features and capabilities of SCTP.
SCTP is a transport protocol that overcomes many of the shortcomings of TCP, namely head-of-line blocking and stream-oriented transmission.
SCTP supports multiple streams within a connection and preserves boundaries of application messages thus greatly simplifying communication.
Additionally, SCTP supports multi-homing which increases availability in applications with high reliability demands.
SCTP inherits much of the congestion, flow and error control mechanisms of TCP.
SCTP has its roots in telecom carrier networks for use in transitional voice over IP scenarios.
However, SCTP is generic so that it is applicable in many enterprise applications as well.
Overview of SCTP (Stream Control Transmission Protocol)Peter R. Egli
Overview of SCTP (Stream Control Transmission Protocol), outlining the main features and capabilities of SCTP.
SCTP is a transport protocol that overcomes many of the shortcomings of TCP, namely head-of-line blocking and stream-oriented transmission.
SCTP supports multiple streams within a connection and preserves boundaries of application messages thus greatly simplifying communication.
Additionally, SCTP supports multi-homing which increases availability in applications with high reliability demands.
SCTP inherits much of the congestion, flow and error control mechanisms of TCP.
SCTP has its roots in telecom carrier networks for use in transitional voice over IP scenarios.
However, SCTP is generic so that it is applicable in many enterprise applications as well.
Overview of web services and web service architectures.
Web services have come of age and are the foundation of today's enterprise application architectures.
Service Oriented Architecture (SOA) break up traditional application silos into reusable services shared and used by different applications.
Web services group and encapsulate related functionality into reusable functional units.
Web service intermediaries complement the business functionality exposed by web services with
functions such as authentication, load balancing, logging and caching.
To control web service consumer and producer compatibility, web services should carry the version of the service in the interface.
Overview of Spanning Tree Protocol (STP & RSTP)Peter R. Egli
Ethernet networks require a loop-free topology, otherwise more and more broadcastand unknown unicast frames would swamp the network (creation of frame duplicates resulting in a broadcast storm). Spanning Tree Protocol (IEEE 802.1D) and its faster successor RSTP (IEEE 802.1w) provide loop prevention in bridged networks by establising a loop-free tree of forwarding paths between any two bridges in a network with multiple physical paths. If a link fails, STP and RSTP automatically establishes a new loop-free topology. This presentation describes in detail how STP and RSTP work along with typical examples.
Overview of Microsoft Message Queueing (MSMQ) messaging technology.
MSMQ is Microsoft's message queueing technology that also integrates well into the newer Windows Communication Foundation framework.
MSMQ provides most of the features and functionality typical of message queueing systems.
Common Object Request Broker Architecture - CORBAPeter R. Egli
Overview of CORBA (Common Object Request Broker Architecture) object technology.
CORBA is a distributed object technology (DOT) that extends the remote procedure call semantics to distributed objects.
Object interfaces are described in a formal language called IDL (Interface Description Language) that allows generating stubs and skeletons through an IDL compiler.
Component Object Model (COM, DCOM, COM+)Peter R. Egli
Overview of Microsoft COM / DCOM technology.
DCOM is Microsoft's component technology and can be roughly compared to CORBA technology. DCOM is however tightly bound to the Windows operating system (Win32 API). Windows Runtime is a newer Microsoft technology that borrows much of the concepts of COM/DCOM.
Overview of JMS messaging API.
JMS (Java Messaging Service) is an API for asynchronous message based communication between Java based applications.
JMS implementations (instances that implement the JMS API) are called JMS providers.
JMS defines two messaging domains. Point-to-point queues are typically used between one or multiple message senders and a single message receiver.
Topics are multi-point queues where messages are distributed to multiple receivers. As such topics resemble a black board.
Like many other message oriented middleware technologies, JMS provides advanced functions like persistent message delivery mode or different message acknowledgment modes.
Additionally, messages can be sent and received in a transacted mode thus ensuring that either all or no messages are sent and received.
JMS integrates into EJB (Enterprise Java Beans) through message driven beans.
Overview of web services, SOAP, WSDL and UDDI.
A web service provides a defined set of functionality on a machine-processable interface.
The web service interface is described in a formal language like WSDL that allows creating code to access the service thus simplifying web service consumer (client) and provider (server) development.
In big web services, the interface is typically described in WSDL while the access to the service makes use of the SOAP message protocol.
SOAP has its roots in remote object access but is now a general message based and asynchronous transport mechanism.
SOAP is typically carried in HTTP (HyperText Transmission Protocol), but other message based protocols like SMTP (Email) or plain TCP could be used as well.
WSDL provides a formalized description of an interface that is coarsely separated in an abstract service interface definition containing operations and data types, a transport binding that describes how the web service is accessed and finally a description of the location (address) under which a web service is accessible.
UDDI (Universal Description and Discovery Protocol) was meant to become the standard protocol for some kind of a public yellow pages where publicly accessible web services would be listed. Lack of industry interest, however, prevented UDDI to gain widespread use.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host