Ueeneee003 b week 1
•Download as PPTX, PDF•
0 likes•257 views
This document discusses the International System of Units (SI) and its use of base units, derived units, multiples, submultiples, and scientific notation for measurement and calculation. It explains the six base units of the SI system and how derived units are formed from combinations of the base units of length, mass and time. It provides examples of derived mechanical and electrical units and how to write numbers in scientific notation, as well as how to convert between scientific notation and standard form.
Report
Share
Report
Share
Recommended
E003B multiples & si units
This document discusses the International System of Units (SI) and its use of base units, derived units, multiples, and submultiples to describe electrical measurements. It explains that the six base SI units are the units of length, mass, time, temperature, electric current, and luminous intensity. Derived units are formed by combining the base units and include units like voltage, resistance, and capacitance. The document also covers converting between standard and scientific notation to represent numbers in a more convenient form.
Pc 8.3 notes
The document discusses finding the inverse of square matrices to solve systems of linear equations. It defines an inverse matrix as a matrix that when multiplied by the original matrix results in the identity matrix. For a matrix to have an inverse, it must be nonsingular. The document presents methods for finding the inverse of 2x2 and 3x3 matrices, including using the determinant and shortcut formulas. It explains how to use the inverse of the coefficient matrix to solve systems of linear equations. Examples are provided to illustrate calculating inverses and using them to solve systems.
Excel vs minitab which is more powerful
This document compares Excel and Minitab, two popular statistical software programs that are similar but have key differences. It aims to help students choose between Excel and Minitab by providing an in-depth comparison of the two programs. This comparison will outline the similarities and differences to help students pick the best statistical software for their needs.
Support vector-machines-presentation
The document discusses support vector machines (SVM), a supervised machine learning algorithm. SVM can be used for both classification and regression problems by finding a hyperplane that separates classes with the maximum margin. It explains key SVM concepts like support vectors, kernels, hyperparameters like gamma and C, and evaluation techniques like cross-validation. Applications mentioned include text categorization, bioinformatics, face recognition and image classification.
E004B Topic 1
This document discusses electrical resistance and factors that affect it. It explains that resistance opposes current flow and is measured in Ohms. The three main factors that determine a material's resistance are its length, cross-sectional area, and resistivity. Resistance increases with temperature for most metals. Resistance affects voltage drop in a circuit, with higher resistance resulting in greater voltage drop according to Ohm's Law.
Session1semiconductors
This document provides an introduction to electronic power and control systems. It discusses semiconductor devices like diodes and transistors. It covers rectifiers, filters, voltage regulators, inverters, and transducers. The document explains the principles of p-n junctions and how diodes allow current to flow in only one direction. It defines diode specifications and characteristics. Diode testing using an analog multimeter is also covered.
E003B current effects
This document discusses the effects of current flow in single path DC circuits. It describes three main effects: heating, magnetic effects, and sometimes chemical or physiological effects. Heating causes temperature rise and is why components need cooling. Magnetic fields are produced by current flow and allow control of electromagnets. Current passing through the body can cause asphyxiation, ventricular fibrillation, or stop the brain from controlling the heart.
E003B energy & torque
This document discusses key concepts related to energy, work, torque, and power in electrical circuits. It defines work as force applied over a distance, power as the rate of doing work, and energy as the potential to do work. Torque is described as the turning effort of a motor. The document also covers efficiency of machines, calculating output power using speed and rotational force, and how losses indicate efficiency. Power input and output are related to voltage, current, and efficiency calculations.
Recommended
E003B multiples & si units
This document discusses the International System of Units (SI) and its use of base units, derived units, multiples, and submultiples to describe electrical measurements. It explains that the six base SI units are the units of length, mass, time, temperature, electric current, and luminous intensity. Derived units are formed by combining the base units and include units like voltage, resistance, and capacitance. The document also covers converting between standard and scientific notation to represent numbers in a more convenient form.
Pc 8.3 notes
The document discusses finding the inverse of square matrices to solve systems of linear equations. It defines an inverse matrix as a matrix that when multiplied by the original matrix results in the identity matrix. For a matrix to have an inverse, it must be nonsingular. The document presents methods for finding the inverse of 2x2 and 3x3 matrices, including using the determinant and shortcut formulas. It explains how to use the inverse of the coefficient matrix to solve systems of linear equations. Examples are provided to illustrate calculating inverses and using them to solve systems.
Excel vs minitab which is more powerful
This document compares Excel and Minitab, two popular statistical software programs that are similar but have key differences. It aims to help students choose between Excel and Minitab by providing an in-depth comparison of the two programs. This comparison will outline the similarities and differences to help students pick the best statistical software for their needs.
Support vector-machines-presentation
The document discusses support vector machines (SVM), a supervised machine learning algorithm. SVM can be used for both classification and regression problems by finding a hyperplane that separates classes with the maximum margin. It explains key SVM concepts like support vectors, kernels, hyperparameters like gamma and C, and evaluation techniques like cross-validation. Applications mentioned include text categorization, bioinformatics, face recognition and image classification.
E004B Topic 1
This document discusses electrical resistance and factors that affect it. It explains that resistance opposes current flow and is measured in Ohms. The three main factors that determine a material's resistance are its length, cross-sectional area, and resistivity. Resistance increases with temperature for most metals. Resistance affects voltage drop in a circuit, with higher resistance resulting in greater voltage drop according to Ohm's Law.
Session1semiconductors
This document provides an introduction to electronic power and control systems. It discusses semiconductor devices like diodes and transistors. It covers rectifiers, filters, voltage regulators, inverters, and transducers. The document explains the principles of p-n junctions and how diodes allow current to flow in only one direction. It defines diode specifications and characteristics. Diode testing using an analog multimeter is also covered.
E003B current effects
This document discusses the effects of current flow in single path DC circuits. It describes three main effects: heating, magnetic effects, and sometimes chemical or physiological effects. Heating causes temperature rise and is why components need cooling. Magnetic fields are produced by current flow and allow control of electromagnets. Current passing through the body can cause asphyxiation, ventricular fibrillation, or stop the brain from controlling the heart.
E003B energy & torque
This document discusses key concepts related to energy, work, torque, and power in electrical circuits. It defines work as force applied over a distance, power as the rate of doing work, and energy as the potential to do work. Torque is described as the turning effort of a motor. The document also covers efficiency of machines, calculating output power using speed and rotational force, and how losses indicate efficiency. Power input and output are related to voltage, current, and efficiency calculations.
E003B sources
This document discusses different sources of electrical energy including electromagnetic induction, batteries, thermocouples, solar, quartz crystals, and piezo sources. Electromagnetic induction produces an EMF by cutting a conductor through a magnetic field, as in generators and alternators. Batteries use two electrodes in an electrolyte to produce energy chemically as either primary or secondary cells. Thermocouples generate an EMF from the temperature difference between two ends of different conductor materials. Solar converts sunlight directly into electricity while quartz crystals produce an EMF when force is applied.
E003B resistors
Resistors oppose current flow, causing a voltage drop and generating heat through resistance. There are different types of resistors that must dissipate heat without exceeding their power rating to avoid damage. Commercial resistors have preferred resistance values with tolerances indicated through standardized color codes.
Start stop circuit
This document provides a diagram and explanation of a three wire start/stop control circuit. When the start button is pressed, current flows through the normally closed stop button and energizes relay coil K1. When coil K1 energizes, it closes contacts K1.1 and K1.2, allowing current to continue flowing through K1.1 to maintain the circuit even after releasing the start button. Current also flows through K1.2 to turn on an indicator lamp. Pressing the stop button opens its normally closed contact, breaking the current to the relay coil and de-energizing the circuit.
Notas Mesa de examen de ALFABETIZACIÓN DIGITAL
Los estudiantes cuyo nombre figura con verde deben pasar por le centro de estudiantes o por PROTIC's para informarles su situación... ¡FELICIDADES A TODOS POR POSTULARSE Y APROBAR!
E003B meters
We use various meters to measure electrical quantities in a circuit. Voltmeters are used to measure voltage across a component and must be connected across it. Ammeters are used to measure current flowing in a circuit and must be connected in series within the circuit. To measure resistance of a component, the circuit must be de-energized first for safety. Common meters include analog meters, clamp meters, and digital multimeters. Specialized instruments are used for very low or high resistance measurements. Continuity testers are used to check for connections but cannot accurately measure voltage.
E104 B Topic 1
This document discusses electrical fundamentals and units of measurement. It introduces the basic and derived SI units used to measure electrical quantities like voltage, current, resistance, power, and more. It explains how to convert between units, use transposition to solve for different variables in equations, and expresses values using scientific notation. Standard abbreviations and conventions for writing electrical units are also covered.
Pangalos european economy - 04.2013
This document discusses global economic trends from 1980 to 2017 based on GDP and other economic indicators. It notes that from 1980-1990, the United States and Japan led economic expansion, while from 1990-2000 the United States dominated growth. From 2000-2010, emerging economies like the BRICs began to drive growth, with China's economy expanding significantly. The document also examines trends in European GDP, government debt, trade balances, and unemployment during this period. Public debt levels rose sharply in Europe after the 2008 financial crisis.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Monte Carlo Simulat...
This document describes using Monte Carlo simulation to analyze variations in manufacturing processes and electrical circuits. It discusses generating random input variables based on their distributions, calculating output results using equations, and analyzing the output distribution to determine process capability and variation. An example simulates variations in five stacked metal parts and calculates the total dimension distribution. Another simulates variations in resistor values in an electrical circuit and calculates the distribution of the output voltage.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W3 Complex Designs
The document discusses evaluating experiments with multiple responses that may conflict. It provides examples of using a response optimizer and overlaid contour plots in Minitab to determine optimal factor settings that maximize desired results. The response optimizer calculates optimal settings by maximizing a desirability function. Overlaid contour plots show the factor space where all responses meet limits, allowing selection of preferred regions. An example optimizes a rubber mix for tires using these tools.
Defense Presentation(Final).pptx
This thesis characterizes MEMS-based capacitors fabricated using 0.35μm CMOS technology. The capacitors use comb drives with movable fingers to increase overlapping area and capacitance. Experimental results show capacitance increases from 23fF to 38fF as voltage increases, allowing more charge and energy storage. Time constants were measured from 23-37 nanoseconds with increasing capacitance. The capacitors provide enhanced energy storage capacity in a small size suitable for powering microsystems.
Ijret20150410062 doi link not opening
Abstract A multilevel inverter (MLI) is a popular inverter for solar based high power applications. The drawback of conventional H-bridge inverter is non-sinusoidal output voltage, which reduces the output quality of inverter. Later, the drawback of conventional H-bridge was overcome by conventional MLI. But, conventional MLI needs maximum number of diodes and switches. In order to overcome this drawback proposed MLI topology with level shifting sinusoidal pulse width modulation (SPWM) technique can be employed. Proposed MLI contain fewer number of switches and diodes, which helps in optimizing the circuit layout, reducing gate driver circuit for those switches. SPWM technique uses multicarrier waveforms with level shifting ensuring the reduction in total harmonics distortion (THD). In this Paper level shifting SPWM technique has been incorporated in which 5 kHz carrier wave is compare with 50Hz of sinusoidal wave with a modulation index of 0.8. THD of proposed 9-level inverter is 17.27% without filter and 4.29% with LC filter. Simulation of proposed inverter is carried out in MATLAB/SIMULINK. Key Words: Solar, 9-level inverter, Level shifting SPWM, Power diodes and switches, Total Harmonics Distortion (THD)
Circuit Analysis Slides
1) The document provides an introduction and outlines for a circuit analysis course. It discusses topics like resistance, current, voltage, and units of measurement.
2) It defines electrical resistance as the opposition to electron flow in a conductor. Resistance depends on the material's resistivity, length, and cross-sectional area. It also describes different types of resistors.
3) Formulas are provided for calculating resistance of circular wires as well as the relationship between resistance and conductance. Color coding schemes for fixed resistors are also explained.
Applied Operation Research (AOR) Replacement Theory
This presentation is all about the basic concept of Replacement Theory in Applied Operations Research (AOR) .
Simulations of a typical CMOS amplifier circuit using the Monte Carlo method
In the present paper of Microelectronics, some simulations of a typical circuit of amplification, using a CMOS transistor, through the computational tools were performed. At that time, PSPICE® was used, where it was possible to observe the results, which are detailed in this work. The imperfections of the component due to manufacturing processes were obtained from simulations using the Monte Carlo method. The circuit operating point, mean and standard deviation were obtained and the influence of the threshold voltage Vth was analyzed.
Ec
This document outlines the teaching and examination scheme for 3rd and 4th semester courses in the B.E. Electronics and Communication Engineering program.
It lists 8 subjects for the 3rd semester including Engineering Mathematics-III, Analog Electronic Circuits, Logic Design, Network Analysis, Electronic Instrumentation, Field Theory, and their corresponding labs. It provides information on teaching hours, examination duration and marks distribution.
Similarly, it lists 8 subjects for the 4th semester including Engineering Mathematics-IV, Microcontrollers, Control Systems, Signals and Systems, Fundamentals of HDL, Linear ICs and Applications and their labs, along with the associated course details.
lecture4claimsize.pptx
This document discusses non-life insurance mathematics. It begins by showing a graph of claim frequency for motor insurance over time, noting seasonal variations. It then discusses Poisson regression models for attributing claim variation to observable variables. Finally, it discusses fitting parametric distributions like log-normal and Gamma distributions to historical claims data, including situations with censoring where only a lower claim bound is known. The goal is to model claims data to accurately price insurance policies.
4_5_Model Interpretation and diagnostics part 4_B.pdf
This document provides a summary of visual tools for interpreting machine learning models based on partial dependency plots and their variants. It introduces novel visual concepts such as overall, collapsed, and marginal partial dependency plots and shows how they can help with model interpretation. An example is provided using a simple dataset with 6 predictors and a binary target variable to classify fraudulent vs. valid insurance claims. Model interpretation focuses on identifying important variables and their effects rather than explaining individual predictions.
MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILE...
Calculation of boiler efficiency is essential if its parameters need to be controlled for either maintaining or
enhancing its efficiency. But determination of boiler efficiency using conventional method is time
consuming and very expensive. Hence, it is not recommended to find boiler efficiency frequently. The work
presented in this paper deals with establishing the statistical model for boiler efficiency using major boiler
losses. Collected data from an eminent industry shows that the loss due to dry flue gas, loss due to
hydrogen content in fuel and loss due to moisture content in fuel are the major losses. The boiler efficiency
depends mainly on these losses. Multiple regression analysis is used for building the model.
Design, Develop and Implement an Efficient Polynomial Divider
Polynomial Division is a most common numerical
operation experienced in many filters and similar circuits next to
multiplication, addition and subtraction. Due to frequent use of
such components in mobile and other communication
applications, a fast polynomial division would improve overall
speed for many such applications. This project is to design,
develop and implement an efficient polynomial divider
algorithm, along with the circuit. Next its output performance
result is verified using Verilog simulation. A literature survey on
the normal division algorithms currently used by ALU’s to
perform division for large numbers, yielded Booth’s algorithm,
Restoring and Non-restoring algorithm. Verilog simulation of
these algorithms were used to derive efficiency in terms of the
timing characteristics, required chip area and power dissipation.
Initially, performance analysis of the existing algorithms was
done based on the simulated outputs. Later similar analysis with
the updated polynomial divider circuit is performed.
Visual Tools for explaining Machine Learning Models
Binary dependent variable classification model in context of large databases: interpretation via visual tools such as partial dependency plots for 1, 2, 3, and 4 variables and other plots. Presentation focuses on overall and not individual observation interpretation, and is still work in progress.
IRJET-Study of Three State Switching Cell Based DC-To-DC Converter
This document presents a study of a three-state switching cell based DC-to-DC converter. It describes the system configuration including a voltage multiplier and three-state switching cell incorporated into a buck-boost DC-DC converter topology. MATLAB/Simulink simulation and experimental testing of a prototype 1kW converter is performed. Simulation and experimental results demonstrating boost and buck operation with input voltages of 40V and 80V regulating the output to 134V are presented and discussed. The converter achieves high voltage gain with reduced component sizes and voltage stresses on the switches.
Using capability assessment during product design
The document discusses using capability assessment during product design. It covers conducting Monte Carlo analysis early in the design process to identify potential issues. An example is provided of using Monte Carlo analysis on a simple voltage regulator design to evaluate the output variation given input tolerances. Different design revisions are analyzed, showing how tighter component tolerances and controlling ratios between components can improve capability. The benefits of conducting capability assessments throughout the design and prototype stages are discussed.
More Related Content
Viewers also liked
E003B sources
This document discusses different sources of electrical energy including electromagnetic induction, batteries, thermocouples, solar, quartz crystals, and piezo sources. Electromagnetic induction produces an EMF by cutting a conductor through a magnetic field, as in generators and alternators. Batteries use two electrodes in an electrolyte to produce energy chemically as either primary or secondary cells. Thermocouples generate an EMF from the temperature difference between two ends of different conductor materials. Solar converts sunlight directly into electricity while quartz crystals produce an EMF when force is applied.
E003B resistors
Resistors oppose current flow, causing a voltage drop and generating heat through resistance. There are different types of resistors that must dissipate heat without exceeding their power rating to avoid damage. Commercial resistors have preferred resistance values with tolerances indicated through standardized color codes.
Start stop circuit
This document provides a diagram and explanation of a three wire start/stop control circuit. When the start button is pressed, current flows through the normally closed stop button and energizes relay coil K1. When coil K1 energizes, it closes contacts K1.1 and K1.2, allowing current to continue flowing through K1.1 to maintain the circuit even after releasing the start button. Current also flows through K1.2 to turn on an indicator lamp. Pressing the stop button opens its normally closed contact, breaking the current to the relay coil and de-energizing the circuit.
Notas Mesa de examen de ALFABETIZACIÓN DIGITAL
Los estudiantes cuyo nombre figura con verde deben pasar por le centro de estudiantes o por PROTIC's para informarles su situación... ¡FELICIDADES A TODOS POR POSTULARSE Y APROBAR!
E003B meters
We use various meters to measure electrical quantities in a circuit. Voltmeters are used to measure voltage across a component and must be connected across it. Ammeters are used to measure current flowing in a circuit and must be connected in series within the circuit. To measure resistance of a component, the circuit must be de-energized first for safety. Common meters include analog meters, clamp meters, and digital multimeters. Specialized instruments are used for very low or high resistance measurements. Continuity testers are used to check for connections but cannot accurately measure voltage.
E104 B Topic 1
This document discusses electrical fundamentals and units of measurement. It introduces the basic and derived SI units used to measure electrical quantities like voltage, current, resistance, power, and more. It explains how to convert between units, use transposition to solve for different variables in equations, and expresses values using scientific notation. Standard abbreviations and conventions for writing electrical units are also covered.
Pangalos european economy - 04.2013
This document discusses global economic trends from 1980 to 2017 based on GDP and other economic indicators. It notes that from 1980-1990, the United States and Japan led economic expansion, while from 1990-2000 the United States dominated growth. From 2000-2010, emerging economies like the BRICs began to drive growth, with China's economy expanding significantly. The document also examines trends in European GDP, government debt, trade balances, and unemployment during this period. Public debt levels rose sharply in Europe after the 2008 financial crisis.
Viewers also liked (7)
Similar to Ueeneee003 b week 1
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Monte Carlo Simulat...
This document describes using Monte Carlo simulation to analyze variations in manufacturing processes and electrical circuits. It discusses generating random input variables based on their distributions, calculating output results using equations, and analyzing the output distribution to determine process capability and variation. An example simulates variations in five stacked metal parts and calculates the total dimension distribution. Another simulates variations in resistor values in an electrical circuit and calculates the distribution of the output voltage.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W3 Complex Designs
The document discusses evaluating experiments with multiple responses that may conflict. It provides examples of using a response optimizer and overlaid contour plots in Minitab to determine optimal factor settings that maximize desired results. The response optimizer calculates optimal settings by maximizing a desirability function. Overlaid contour plots show the factor space where all responses meet limits, allowing selection of preferred regions. An example optimizes a rubber mix for tires using these tools.
Defense Presentation(Final).pptx
This thesis characterizes MEMS-based capacitors fabricated using 0.35μm CMOS technology. The capacitors use comb drives with movable fingers to increase overlapping area and capacitance. Experimental results show capacitance increases from 23fF to 38fF as voltage increases, allowing more charge and energy storage. Time constants were measured from 23-37 nanoseconds with increasing capacitance. The capacitors provide enhanced energy storage capacity in a small size suitable for powering microsystems.
Ijret20150410062 doi link not opening
Abstract A multilevel inverter (MLI) is a popular inverter for solar based high power applications. The drawback of conventional H-bridge inverter is non-sinusoidal output voltage, which reduces the output quality of inverter. Later, the drawback of conventional H-bridge was overcome by conventional MLI. But, conventional MLI needs maximum number of diodes and switches. In order to overcome this drawback proposed MLI topology with level shifting sinusoidal pulse width modulation (SPWM) technique can be employed. Proposed MLI contain fewer number of switches and diodes, which helps in optimizing the circuit layout, reducing gate driver circuit for those switches. SPWM technique uses multicarrier waveforms with level shifting ensuring the reduction in total harmonics distortion (THD). In this Paper level shifting SPWM technique has been incorporated in which 5 kHz carrier wave is compare with 50Hz of sinusoidal wave with a modulation index of 0.8. THD of proposed 9-level inverter is 17.27% without filter and 4.29% with LC filter. Simulation of proposed inverter is carried out in MATLAB/SIMULINK. Key Words: Solar, 9-level inverter, Level shifting SPWM, Power diodes and switches, Total Harmonics Distortion (THD)
Circuit Analysis Slides
1) The document provides an introduction and outlines for a circuit analysis course. It discusses topics like resistance, current, voltage, and units of measurement.
2) It defines electrical resistance as the opposition to electron flow in a conductor. Resistance depends on the material's resistivity, length, and cross-sectional area. It also describes different types of resistors.
3) Formulas are provided for calculating resistance of circular wires as well as the relationship between resistance and conductance. Color coding schemes for fixed resistors are also explained.
Applied Operation Research (AOR) Replacement Theory
This presentation is all about the basic concept of Replacement Theory in Applied Operations Research (AOR) .
Simulations of a typical CMOS amplifier circuit using the Monte Carlo method
In the present paper of Microelectronics, some simulations of a typical circuit of amplification, using a CMOS transistor, through the computational tools were performed. At that time, PSPICE® was used, where it was possible to observe the results, which are detailed in this work. The imperfections of the component due to manufacturing processes were obtained from simulations using the Monte Carlo method. The circuit operating point, mean and standard deviation were obtained and the influence of the threshold voltage Vth was analyzed.
Ec
This document outlines the teaching and examination scheme for 3rd and 4th semester courses in the B.E. Electronics and Communication Engineering program.
It lists 8 subjects for the 3rd semester including Engineering Mathematics-III, Analog Electronic Circuits, Logic Design, Network Analysis, Electronic Instrumentation, Field Theory, and their corresponding labs. It provides information on teaching hours, examination duration and marks distribution.
Similarly, it lists 8 subjects for the 4th semester including Engineering Mathematics-IV, Microcontrollers, Control Systems, Signals and Systems, Fundamentals of HDL, Linear ICs and Applications and their labs, along with the associated course details.
lecture4claimsize.pptx
This document discusses non-life insurance mathematics. It begins by showing a graph of claim frequency for motor insurance over time, noting seasonal variations. It then discusses Poisson regression models for attributing claim variation to observable variables. Finally, it discusses fitting parametric distributions like log-normal and Gamma distributions to historical claims data, including situations with censoring where only a lower claim bound is known. The goal is to model claims data to accurately price insurance policies.
4_5_Model Interpretation and diagnostics part 4_B.pdf
This document provides a summary of visual tools for interpreting machine learning models based on partial dependency plots and their variants. It introduces novel visual concepts such as overall, collapsed, and marginal partial dependency plots and shows how they can help with model interpretation. An example is provided using a simple dataset with 6 predictors and a binary target variable to classify fraudulent vs. valid insurance claims. Model interpretation focuses on identifying important variables and their effects rather than explaining individual predictions.
MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILE...
Calculation of boiler efficiency is essential if its parameters need to be controlled for either maintaining or
enhancing its efficiency. But determination of boiler efficiency using conventional method is time
consuming and very expensive. Hence, it is not recommended to find boiler efficiency frequently. The work
presented in this paper deals with establishing the statistical model for boiler efficiency using major boiler
losses. Collected data from an eminent industry shows that the loss due to dry flue gas, loss due to
hydrogen content in fuel and loss due to moisture content in fuel are the major losses. The boiler efficiency
depends mainly on these losses. Multiple regression analysis is used for building the model.
Design, Develop and Implement an Efficient Polynomial Divider
Polynomial Division is a most common numerical
operation experienced in many filters and similar circuits next to
multiplication, addition and subtraction. Due to frequent use of
such components in mobile and other communication
applications, a fast polynomial division would improve overall
speed for many such applications. This project is to design,
develop and implement an efficient polynomial divider
algorithm, along with the circuit. Next its output performance
result is verified using Verilog simulation. A literature survey on
the normal division algorithms currently used by ALU’s to
perform division for large numbers, yielded Booth’s algorithm,
Restoring and Non-restoring algorithm. Verilog simulation of
these algorithms were used to derive efficiency in terms of the
timing characteristics, required chip area and power dissipation.
Initially, performance analysis of the existing algorithms was
done based on the simulated outputs. Later similar analysis with
the updated polynomial divider circuit is performed.
Visual Tools for explaining Machine Learning Models
Binary dependent variable classification model in context of large databases: interpretation via visual tools such as partial dependency plots for 1, 2, 3, and 4 variables and other plots. Presentation focuses on overall and not individual observation interpretation, and is still work in progress.
IRJET-Study of Three State Switching Cell Based DC-To-DC Converter
This document presents a study of a three-state switching cell based DC-to-DC converter. It describes the system configuration including a voltage multiplier and three-state switching cell incorporated into a buck-boost DC-DC converter topology. MATLAB/Simulink simulation and experimental testing of a prototype 1kW converter is performed. Simulation and experimental results demonstrating boost and buck operation with input voltages of 40V and 80V regulating the output to 134V are presented and discussed. The converter achieves high voltage gain with reduced component sizes and voltage stresses on the switches.
Using capability assessment during product design
The document discusses using capability assessment during product design. It covers conducting Monte Carlo analysis early in the design process to identify potential issues. An example is provided of using Monte Carlo analysis on a simple voltage regulator design to evaluate the output variation given input tolerances. Different design revisions are analyzed, showing how tighter component tolerances and controlling ratios between components can improve capability. The benefits of conducting capability assessments throughout the design and prototype stages are discussed.
22_RepeatedMeasuresDesign_Complete.pptx
1) The document describes a unit on repeated measures designs, including a review of standard repeated measures analyses using linear models and multi-level modeling, as well as an alternative approach.
2) Key features of repeated measures designs are discussed, such as having more than one observation per participant. Advantages and challenges like order effects are also reviewed.
3) Methods for analyzing repeated measures data using linear models by first transforming the data into wide format using differences and averages are described and compared to a multi-level modeling approach.
Gate 2020 Electrical Engineering (29 years solution)
Oder now - https://iesmasterpublications.com/gate-books/
The door to GATE exam is through previous year question papers. If you are able to solve question papers in access of 10 years, you are sure to clear the GATE exam, and open new vistas of career and learning. IES Master’s Electrical Engineering GATE 2020 gives detailed solutions for the past 29 years question papers. Unlike other GATE solution books published by some of the leading institutes/publishers, the solution books offered by IES Master include topic-wise descriptions. The emphasis is clearly on the understanding of concepts and building upon a holistic picture. So as you finish a topic, say Power System Stability, you will find all the previous years’ question papers with detailed explanation under one topic.
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W2 Non Normal Data
This document discusses evaluating and transforming non-normal distributed data sets to normal distributions. It describes the Box-Cox and Johnson transformations which can be used to normalize data. The Box-Cox tries to directly transform data while Johnson "distorts" a normal distribution to model the data distribution. The document provides examples applying the Johnson transformation to uniform and non-normal data sets. Graphical analyses show the transformations successfully produce normal distributions for analysis and process capability evaluations.
ECE260BMiniProject2Report
This document summarizes the results of a mini project to reduce leakage power through cell sizing. It applied VT swapping and resizing to cells sorted by slack, repeating to find further improvements. Simulation showed leakage power reduction of 90.997-93.558% across benchmarks, with slack below -1ps and no violations. PBA vs GBA and SI vs non-SI analysis found cell delays differed due to worst-case assumptions and crosstalk effects considered.
IRJET- Implementation of Modified H-Bridge Multilevel Inverter Topology f...
The document proposes a new seven-level inverter topology based on a modified H-bridge converter for use in solar photovoltaic systems. The proposed topology requires only eight switches to generate seven voltage levels, compared to twelve switches needed in conventional cascaded H-bridge topologies. Simulation results in MATLAB demonstrate the feasibility of the proposed topology, showing it can produce a seven-level output voltage waveform with less than 2% total harmonic distortion using a small filter. Experimental validation with a 10W solar panel and resistive load verifies the simulation results.
Similar to Ueeneee003 b week 1 (20)
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Monte Carlo Simulat...
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W4 Monte Carlo Simulat...
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W3 Complex Designs
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W3 Complex Designs
Applied Operation Research (AOR) Replacement Theory
Applied Operation Research (AOR) Replacement Theory
Simulations of a typical CMOS amplifier circuit using the Monte Carlo method
Simulations of a typical CMOS amplifier circuit using the Monte Carlo method
4_5_Model Interpretation and diagnostics part 4_B.pdf
4_5_Model Interpretation and diagnostics part 4_B.pdf
MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILE...
MULTIPLE LINEAR REGRESSION ANALYSIS FOR PREDICTION OF BOILER LOSSES AND BOILE...
Design, Develop and Implement an Efficient Polynomial Divider
Design, Develop and Implement an Efficient Polynomial Divider
Visual Tools for explaining Machine Learning Models
Visual Tools for explaining Machine Learning Models
IRJET-Study of Three State Switching Cell Based DC-To-DC Converter
IRJET-Study of Three State Switching Cell Based DC-To-DC Converter
Gate 2020 Electrical Engineering (29 years solution)
Gate 2020 Electrical Engineering (29 years solution)
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W2 Non Normal Data
Javier Garcia - Verdugo Sanchez - Six Sigma Training - W2 Non Normal Data
IRJET- Implementation of Modified H-Bridge Multilevel Inverter Topology f...
IRJET- Implementation of Modified H-Bridge Multilevel Inverter Topology f...
More from popet
3 phase motors 1
The document discusses 3-phase motors and how they produce a rotating magnetic field using 3 stator windings that are 120 degrees apart, powered by a 3-phase supply with voltages that are also 120 degrees apart. This rotating magnetic field is produced as the magnetic flux from each winding rotates continuously, causing the field to move around the stator. The speed of this rotating field is determined by the supply frequency and number of poles in the stator windings. As the rotor lags behind this rotating field, it produces torque.
Max demand
To calculate the current rating of an RCD for a portion of an electrical installation:
1. Calculate the maximum demand for the lighting and socket outlets in the portion using Load Group A and B in Table C1.
2. The maximum demand for the portion was calculated to be 18A based on the socket outlets having a maximum demand of 15A and lighting having 3A.
3. The RCD rating must be at least the greater of the maximum demand or highest circuit breaker rating. In this case, the highest breaker is 20A, so the minimum RCD rating is 20A.
E104 B Topic 1
This document discusses electrical fundamentals and units of measurement. It covers:
1) The seven base SI units including the meter, kilogram, second, ampere, kelvin, mole, and candela.
2) Derived units that are calculated from the base units, such as velocity, acceleration, force, torque, pressure, electrical charge, voltage, resistance, energy, work, and power.
3) Conventions for writing units, such as using a space between numbers and units, clustering numbers over 999 into groups of three, and including leading zeros for decimal values.
Transducers
Transducers convert one form of energy to another. They are defined as devices that convert an input signal of one form to an output signal of another form. Transducers can measure many quantities including energy, pressure, temperature, position, and more. Common transducers include thermocouples, thermistors, strain gauges, and magnetic pickups. Transducer parameters that are important to consider include sensitivity, range, span, linearity, hysteresis, accuracy, and precision.
Inverters
Inverters take direct current (DC) from a battery and convert it to alternating current (AC) power electronically. They use switches to rapidly open and close, generating a square wave that is fed into a transformer to produce AC. Inverters can produce different waveforms like square, modified sine, or true sine. Smaller inverters are typically square wave or modified sine wave, while larger inverters produce true sine waves.
Power control devices
The document discusses various power control devices including silicon controlled rectifiers (SCRs), triacs, diacs, gate turn-off thyristors (GTOs), bipolar junction transistors (BJTs), and metal-oxide-semiconductor field-effect transistors (MOSFETs). SCRs, triacs, and diacs can only be turned off by reducing the anode current below a threshold, while GTOs can be turned off by a negative gate signal. BJTs and MOSFETs can be used as electronic switches by controlling the base/gate current to turn the device on or off.
Voltage regulation
Voltage regulation circuits like the zener diode and three-terminal regulators can maintain a constant output voltage despite fluctuations in load conditions or input voltage. A zener diode operates in reverse bias to regulate voltage at a specific breakdown voltage. A three-terminal voltage regulator integrated circuit provides precise voltage control with only a few external components and has built-in protections like overcurrent prevention. The adjustable three-terminal regulator uses a resistor network and reference voltage to set the output voltage.
Filter circuits
This document discusses different types of filter circuits used to reduce ripple voltage and increase average DC voltage output. It describes L-section filters which use an inductor to provide constant current to the load and reduce ripple voltage which is then filtered by a capacitor. Pi filters are also described where the capacitors provide a short circuit for AC and an open circuit for DC, while the inductor blocks AC and provides a short circuit for DC. The document also mentions using a bleed resistor to safely discharge capacitor charge over time when the load is removed.
Session 2 & 3 rectifiers
DC power supplies work by taking an AC voltage from a transformer, rectifying it using diodes to convert it to DC, filtering it using capacitors to smooth the output, and regulating it using integrated circuits to maintain a steady voltage level. Common rectification methods include half-wave and full-wave rectification using either single-phase or three-phase inputs. The rectification process converts the AC voltage to a pulsing DC voltage that is then filtered and regulated.
Electrical Heating
The document discusses various methods of electrical heating, including different types of water heaters, heat control methods like thermostats, and potential faults in electric heating equipment. It provides information on topics like heat transfer methods, temperature scales, specific heat capacity, and requirements for installing water heaters. Diagrams are included to illustrate components like thermostats and water heating systems.
E003B power
This document discusses power in single path DC circuits. It defines power as the rate at which energy is converted, measured in watts. It explains that power ratings indicate how quickly a device converts energy. Formulas show that power is equal to voltage times current or current squared times resistance. Heat produced during energy conversion can cause problems for some devices like motors and transformers but not others like lamps. Examples are provided for calculating current drawn with different voltages and resistances.
E003B protection devices
This document discusses different types of protection devices used in single path DC circuits. It describes semi-enclosed rewireable fuses and high rupturing capacity fuses, and explains that fuses blow when the current exceeds their current rating and can interrupt currents up to their fault current rating. It also discusses circuit breakers, describing them as magnetic, thermal, or thermal-magnetic, and notes they offer better reset capability after clearing a fault. It provides details on how magnetic circuit breakers operate during a short circuit by creating a magnetic field that forces the contacts to open.
E003B basic circuits
This document discusses the key components and concepts in basic electrical circuits. It explains that a circuit consists of a supply, load, control, protection, and connecting cables. The load converts electrical energy to heat, magnetic, or chemical energy for various applications like lights, appliances, and motors. Cables need to be appropriately sized to safely carry the current load and prevent overheating. Protection devices like fuses and circuit breakers are important to prevent equipment damage and ensure user safety in the event of overloads or short circuits.
E003 b ohms law
The document discusses Ohm's law, which establishes the relationship between voltage, current, and resistance in electrical circuits. It explains that voltage and current are directly proportional, while current and resistance are inversely proportional. Several examples are provided to demonstrate calculating voltage, current, and resistance using the Ohm's law formula V=IR.
E003B electrical concepts
The document discusses the basic concepts of electricity including voltage, current, resistance, and atoms. It explains that voltage is electrical pressure, current is the flow of electrons, and resistance opposes current flow. Atoms are made up of electrons, protons and neutrons. An atom can gain or lose electrons to become positively or negatively charged ions. Current is defined as the conventional flow of electrons from the negative terminal to the positive terminal of a battery when a conducting path is provided.
OH&S
This document summarizes key aspects of occupational health and safety regulations in Canada, including:
1) It outlines the internal responsibility system where workplace parties share responsibility for health and safety and must work together to identify hazards.
2) It describes the rights of workers including the right to know about hazards, participate in health and safety, and refuse dangerous work.
3) It details the duties of employers, supervisors, workers, constructors, directors and officers to take precautions to protect worker safety.
4) Reporting obligations for workplace accidents and critical injuries are also summarized.
Lecture 13 2 26 2004
Magnetism is caused by the alignment of atoms' spins and orbits within materials like iron, nickel, and cobalt. Magnetic fields are produced by moving electric charges. In magnetic materials, the atomic spins and orbits align into regions called domains that can be oriented by an external magnetic field. Electric currents produce magnetic fields, and changing magnetic fields induce electric currents based on Faraday's law of induction. This principle is exploited in devices like generators, transformers, and motors.
Magnetism3
Magnets have been known for centuries and have magical properties. Magnetism is the force of attraction or repulsion between magnetic materials due to the arrangement of electrons in their atoms. Magnets always have two poles - a north and a south pole. The region where magnetic forces act is called the magnetic field. The Earth itself acts as a large magnet and its magnetic field extends into space.
Solve problems in electromagnet circuits 2
The document discusses various topics related to magnetism and electromagnetism including ferromagnetic materials like iron, nickel, and cobalt. It explains that moving electrons produce magnetic fields and outlines some key discoveries like Oersted discovering that moving electrons create magnetic fields. It also briefly touches on topics like magnetic domains, magnetic tape, electromagnets, electric motors, generators, and power plants.
More from popet (20)
Recently uploaded
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Recently uploaded (20)
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Ueeneee003 b week 1
- 1. UEENEEE003B Solve Problems in Single Path DC Circuits
- 2. The Systeme Internationale’ (SI) is the International Metric System There are 6 Base Units in the SI system 7/6/2011 Revision02 2 Base Units
- 3. The six basic units are not sufficient to act for all situations that arise in measurement. Derived units are used for all non-basic situations. Most derived units use the three basic units of length, mass and time in various combinations. . 7/6/2011 Revision02 3 SI Derived Units
- 4. 7/6/2011 Revision02 4 SI Derived Units The units used can be subdivided into three groups: mechanical, electrical and magnetic although it must be realised there are many more examples than those listed
- 5. 7/6/2011 Revision02 5 Derived Mechanical Units
- 6. 7/6/2011 Revision02 6 Derived Electrical Units
- 7. In practical cases some SI values are inconveniently large or small, In order to choose values that are convenient to handle, multiples or submultiples are used. For example, if the resistance of an electrical installation is measured at 15 000 000 ohms, it is more convenient to refer to this value as 15 megohms. 7/6/2011 Revision02 7 Multiples And Submultiples
- 8. 7/6/2011 8 Multiples and Submultiples
- 10. Another method of overcoming cumbersome rows of figures is to notate numbers to a value between 1 and 10 multiplied by 10 to some power. For example, 6 800 000 can be expressed as 6.8 x 106and 1250 as 1.25 x 103 7/6/2011 Revision02 10 Scientific Notation
- 11. Given: 1.015 x 10 -8 Answer: 0.00000001015 (8 places to left) Negative exponent move decimal to the left Given: 5.024 x 10 -3 Answer: 5,024 (3 places to the right) Positive exponent move decimal to the right 7/6/2011 Revision02 11 Examples:
- 12. Move decimal point to right for positive exponent of 10 Move decimal point to left for negative exponent of 10 7/6/2011 Revision02 12 To change from scientific notation to standard form:
- 13. Examples Express in standard form 1.09 x 10 3 4.22715 x 10 8 3.078 x 10 – 4 9.004 x 10 – 2 5.1874 x 10 2 7/6/2011 Revision02 13
- 14. 7/6/2011 Revision02 14 Express in correct scientific notation 0.0000568 321 64 960 000 0.07085 61 500
- 15. Complete pages of workbook 7/6/2011 Revision02 15 Rounding off