Types of air conditioner
•Download as PPTX, PDF•
8 likes•1,827 views
Here you get a clear idea about all types of air conditioner. Both Domestic and commercial air conditioner. Also get website of Melbourne Air conditioning & Heating's. From where you will get the Air conditioning service information near Melbourne, victoria area
Report
Share
Report
Share
Recommended
types of accoustics ppt
Acoustics is the science dealing with mechanical waves, including sound. It involves the study of sound propagation, absorption, and reflection. Acoustics consultants provide services related to architectural acoustics, noise control, vibration analysis, and modeling of sound. The spectrum of sound ranges from infrasound to ultrasound. Sound is transmitted through materials as longitudinal or transverse waves. Key characteristics of sound waves include amplitude, frequency, wavelength, and the decibel scale used to measure intensity.
Day lighting
This document discusses concepts and methods for daylighting buildings. It begins by stating that daylight is a renewable source of light that can save energy and create a comfortable environment when utilized for interior lighting. It then describes various daylighting design methods like the use of skylights, clerestories, light shelves, and building orientation. The document also notes some challenges of daylighting like increased heat gain and potential for glare. It provides guidance on daylighting design for different climates.
Introduction For Lighting Luminaries
The document discusses lighting systems and designs for a factory. It identifies problems with the current lighting system such as not meeting lux level recommendations and not using efficient luminary and lamp types. To address this, the author proposes redesigning the lighting system using the Dialux program to select more appropriate luminaries and lamps that satisfy lighting codes and provide efficient energy use. The document then provides definitions and classifications related to lighting design standards and components.
Interior lighting design tips
Design ideas for lighting up of interior spaces composed in easy to interpret tips and explanatory sketches
CFL
This document discusses compact fluorescent lamps (CFLs). It states that CFLs use 1/5 to 1/3 the energy of incandescent lamps, last 8-15 times longer, and have higher upfront costs but lower lifetime electricity costs. CFLs contain mercury, emit light through phosphors, and come in integrated or non-integrated versions. They have longer lifespans than incandescent lamps and higher energy efficiency.
Lighting Design Project
The document discusses various aspects of lighting design including:
- Color temperature is measured in Kelvin and affects the appearance of a room, with higher temperatures appearing whiter and cooler.
- Lighting fixtures (luminaires) come in different types like recessed, ceiling mounted, wall mounted, and portable and are classified based on their form and mounting method.
- Different light sources are discussed like incandescent, fluorescent, LED, and high intensity discharge lamps. Each have their own characteristics in terms of efficiency, lifespan, and light output.
- Factors that influence lighting design include color rendering, finishes, lamp type, and distribution of light. Proper lighting is essential for interior spaces.
Lighting architecture notes lectureLighting architecture lecture 5
The lumen method is a widely used lighting design method that calculates illumination levels based on the total lumens output of lamps, the utilization factor, and maintenance factor. It can be used to either check or directly design a lighting scheme. Two example problems are provided to demonstrate how to use the method to calculate the number of lamps needed based on the desired illumination level and room area. The watts-per-square-foot method involves multiplying the room area by recommended wattages per square foot to determine total lighting power needs. Two example problems apply this method to determine the number of luminaires required.
LIGHTING SYSTEMS AND THEIR DESIGN..MAU---JMI-2014
This document provides an overview of lighting systems and their design. It discusses the three main types of lighting systems: ambient, accent, and task lighting. Ambient lighting provides overall illumination, accent lighting highlights specific objects, and task lighting is aimed at specific work areas. Proper lighting design considers illumination levels, placement of luminaires, and controls. Key factors in lighting design include distribution, quality and quantity of light, and how lighting impacts spaces and people. The document also outlines techniques for controlling directionality of light and defines lighting design terms.
Recommended
types of accoustics ppt
Acoustics is the science dealing with mechanical waves, including sound. It involves the study of sound propagation, absorption, and reflection. Acoustics consultants provide services related to architectural acoustics, noise control, vibration analysis, and modeling of sound. The spectrum of sound ranges from infrasound to ultrasound. Sound is transmitted through materials as longitudinal or transverse waves. Key characteristics of sound waves include amplitude, frequency, wavelength, and the decibel scale used to measure intensity.
Day lighting
This document discusses concepts and methods for daylighting buildings. It begins by stating that daylight is a renewable source of light that can save energy and create a comfortable environment when utilized for interior lighting. It then describes various daylighting design methods like the use of skylights, clerestories, light shelves, and building orientation. The document also notes some challenges of daylighting like increased heat gain and potential for glare. It provides guidance on daylighting design for different climates.
Introduction For Lighting Luminaries
The document discusses lighting systems and designs for a factory. It identifies problems with the current lighting system such as not meeting lux level recommendations and not using efficient luminary and lamp types. To address this, the author proposes redesigning the lighting system using the Dialux program to select more appropriate luminaries and lamps that satisfy lighting codes and provide efficient energy use. The document then provides definitions and classifications related to lighting design standards and components.
Interior lighting design tips
Design ideas for lighting up of interior spaces composed in easy to interpret tips and explanatory sketches
CFL
This document discusses compact fluorescent lamps (CFLs). It states that CFLs use 1/5 to 1/3 the energy of incandescent lamps, last 8-15 times longer, and have higher upfront costs but lower lifetime electricity costs. CFLs contain mercury, emit light through phosphors, and come in integrated or non-integrated versions. They have longer lifespans than incandescent lamps and higher energy efficiency.
Lighting Design Project
The document discusses various aspects of lighting design including:
- Color temperature is measured in Kelvin and affects the appearance of a room, with higher temperatures appearing whiter and cooler.
- Lighting fixtures (luminaires) come in different types like recessed, ceiling mounted, wall mounted, and portable and are classified based on their form and mounting method.
- Different light sources are discussed like incandescent, fluorescent, LED, and high intensity discharge lamps. Each have their own characteristics in terms of efficiency, lifespan, and light output.
- Factors that influence lighting design include color rendering, finishes, lamp type, and distribution of light. Proper lighting is essential for interior spaces.
Lighting architecture notes lectureLighting architecture lecture 5
The lumen method is a widely used lighting design method that calculates illumination levels based on the total lumens output of lamps, the utilization factor, and maintenance factor. It can be used to either check or directly design a lighting scheme. Two example problems are provided to demonstrate how to use the method to calculate the number of lamps needed based on the desired illumination level and room area. The watts-per-square-foot method involves multiplying the room area by recommended wattages per square foot to determine total lighting power needs. Two example problems apply this method to determine the number of luminaires required.
LIGHTING SYSTEMS AND THEIR DESIGN..MAU---JMI-2014
This document provides an overview of lighting systems and their design. It discusses the three main types of lighting systems: ambient, accent, and task lighting. Ambient lighting provides overall illumination, accent lighting highlights specific objects, and task lighting is aimed at specific work areas. Proper lighting design considers illumination levels, placement of luminaires, and controls. Key factors in lighting design include distribution, quality and quantity of light, and how lighting impacts spaces and people. The document also outlines techniques for controlling directionality of light and defines lighting design terms.
Lighting architecture lecture 3
The document defines key terminology used in illumination, including luminance, illuminance, lux, lumen, candela, foot-candle, efficacy, efficiency, glare, and luminaires. Luminance refers to the amount of light emitted from a surface, illuminance is the amount of light falling on a surface, and lux is a unit of illuminance or luminous flux per unit area. Glare can be direct from a light source or indirect from reflections, and causes visual discomfort or disability depending on its severity. Luminaires are lighting fixtures or fittings used to hold and distribute light sources.
Fire fighting System
Firefighting involves preventing the spread of and extinguishing unwanted fires to protect lives, property, and the environment. Smoke detectors sense smoke to indicate fires, activating alarms. Heat detectors also identify fires without smoke. Fire alarm control panels receive information from environmental sensors and control alarm equipment in response to detected fires. Fire sprinkler systems use a water distribution system and sprinkler heads that release water when temperatures reach high levels to suppress fires. Building fire protection includes additional measures like wet risers to supply water to high levels and heat and smoke vents to remove heat and smoke from building fires.
Interior Lighting Guide - Interior Lighting Bringing Rooms To Life
Interior Lighting: Bringing Rooms To Life teaches the basics of residential interior lighting. The liveaction video demonstrates how the angle, quality, and intensity of light influence how it is perceived and used.
The program explains ambient lighting, task lighting, and accent lighting. It demonstrates different kinds of lamps and lighting fixtures and shows how each contributes to the overall interior design plan.
The video is aimed at students taking introductory courses in interior design or lighting.
Electrical lighting design and calculations
For more relevant materials visit
electro-voyage.blogspot.com
In this slide, we will see how to approach the basic lighting system both manually and using software
We will have to solve a few examples and design the lighting system manually by applying the various formula of the Lumen Method.
Illumination presentation
This document discusses lighting considerations for auditoriums. It recommends a horizontal illuminance of 50 lux and a vertical illuminance of 30 lux when a projection screen is in use. It also provides tips for using automatic controls, efficient bulbs, and energy-saving fluorescents. The document outlines different types of stage lighting like fresnel, flood lights, gel lights, and par lights. It provides examples of auditorium seating capacities at the NCPA in Mumbai.
Types of Lighting and Luminaire
Sample pictures of lighting and luminaire, For architecture students having subjects such as Building Utilities; Lighting and Acoustics.
Types of air conditioner
The document discusses the main types of air conditioners, including window units, split wall units, ceiling consoles, portable units, central/compact split systems, and commercial split units. For each type, it provides a brief description and lists their advantages and disadvantages. The types vary in their installation complexity and costs, noise levels, capacity, mobility, and suitability for different size spaces.
Lighting ppt 1
This document discusses ways to reduce energy usage from lighting in buildings through green practices. It recommends using natural daylight whenever possible through proper window and skylight design. When artificial lights are needed, the right amount and type of lighting should be used based on the task. Different lighting technologies like LEDs and fluorescents are more efficient than incandescent bulbs. Automatic controls can further reduce energy by turning lights off when not needed or adjusting output based on daylight.
Illumination basic and schemes
This document provides an overview of various types of electrical lighting sources and illumination concepts. It discusses the basic terms used in illumination like luminous flux, lumen, candle power, and inverse square and Lambert's cosine laws. It then describes different electrical light sources including incandescent, fluorescent, mercury vapor, sodium vapor, neon and halogen lamps. For each light source, it explains the working principle, construction details, advantages and applications. The document serves as a useful reference for understanding various electrical lighting techniques and concepts of illumination.
Daylighting
The document discusses various techniques for designing buildings to maximize daylighting, including using light shelves, clerestories, skylights, and borrowing light from perimeter spaces. It also covers controlling sunlight and glare through window orientation, shading devices, and glazing selection. Daylight factors and simulations are addressed as metrics for evaluating daylight performance. Design strategies like narrow floorplans and atria are presented to effectively distribute daylight throughout interior spaces.
Acoustics noise reduction
NOISE REDUCTION FROM MECHANICAL EQUIPMENTS , RUBBER MOUNTS , VIBRATION ISOLATION GUIDELINES , CHARECTERISTICS OF DUCT SYSTEM , NOISE IN AC DUCTS , VIBRATION ISOLATION OF PUMPS AND GENERATORS
Passive solar, passive cooling and daylighting
This document discusses the history and principles of passive solar design. It explains that passive solar design has been used since ancient times to heat buildings using sunlight without mechanical systems. Key aspects of passive solar design include apertures to admit sunlight, thermal mass to store heat, and distribution of stored heat. The document also covers passive cooling techniques like shade trees, overhangs, and natural ventilation. Daylighting strategies are discussed as well, such as skylights and clerestories, which provide natural light while reducing energy use. The overall goal of passive design is to efficiently use sunlight and natural ventilation to provide thermal comfort in an environmentally friendly way.
Lighting design considerations
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
Matheny bell neo-con_east
This seminar was presented as a CEU during the NeoCon East 2017 conference. The presentation sheds light on the pivotal role of lighting in interiors. Besides determining the fundamental principles of artificial lighting design, we’ll focus on the significance of lighting as a design element. In doing so, we’ll introduce the technical aspects of lighting design as well as the psychological impact of light on colors and material. Participants will be trained to understand the principles of lighting and its relationship to interior space; become aware of lighting techniques and fixture selection in relationship to materials and color; achieve a basic understanding of color temperatures and lighting psychology; and understand the importance of user perception in design.
Rebekah Matheny, IIDA, assistant professor, interior design, The Ohio State University, Columbus, OH
Emily Bell, IIDA, MFA design research & development candidate, The Ohio State University, Columbus, OH
If you would like to have this CEU presented to your design team, please contact Rebekah Matheny at matheny.89@osu.edu
Natural ventilation for Building Artitechture
Natural ventilation utilizes differences in air pressure, temperature and wind to ventilate buildings without mechanical systems. There are several types of natural ventilation including stack ventilation, wind towers and courtyard effects. Stack ventilation uses temperature differences to draw warm air out of tall rooms or structures. Wind towers cool incoming air through evaporation before distributing it inside. Courtyards create rising warm air that is replaced by cooler air entering at lower levels. Proper building orientation, openings, cross ventilation and tall structures can optimize natural airflow. While it provides free ventilation, natural ventilation has less control over air quality than mechanical systems.
Solar energy endesa pavilion ppt
The term Heliotropic refers to ‘sun-responsive’, or ‘solar-oriented’. Thus heliotropic housing is simply defined as
the sun oriented housing.
Lighting architecture lecture 6
Electricity is converted to light energy in lamps through heating filaments or gases. Incandescent lamps contain a tungsten filament that glows when heated by electricity, producing light but generating 90% of power as heat. Fluorescent and CFL lamps use mercury vapor and phosphors to produce light from electricity more efficiently. HID lamps like metal halide, sodium, and mercury vapor lamps are very efficient sources used for outdoor and industrial lighting.
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
This document discusses lighting design for commercial and residential spaces. It covers various topics such as:
1. The different types of light sources including incandescent, fluorescent, halogen, and LED lamps.
2. Factors that influence light quality like color temperature, color rendering index, and lighting fixtures.
3. Classifications of lighting fixtures and the different types of lighting like general, accent, task, and decorative lighting.
4. Detailed information about incandescent lamps, their construction, advantages, disadvantages and types.
Solaris, Singapore passive design strategies report
The Solaris building in Singapore uses passive design strategies to reduce energy consumption. It incorporates a spiral ramp design, naturally ventilated spaces, skylights with actuated smoke vent louvers, a rain harvesting system, and a climate responsive facade system. The skylights bring in natural light while also serving as a smoke evacuation system in emergencies. The facade uses sunshades and light shelves controlled by sensors to reduce solar heat gain and provide daylighting. These passive design features allow Solaris to achieve a 36% reduction in energy use compared to other buildings in Singapore.
Lighting design
Lighting design plays a vital role in interior spaces. There are two main types of lighting - natural lighting which uses daylight, and artificial lighting from sources like lamps. Different lighting methods like downlights, uplights, and track lighting can be used depending on the space and desired effects. Proper lighting design considers factors like illumination, color rendering, and color temperature to effectively reveal forms and direct attention.
Air conditioning system
This document discusses different types of air conditioning systems and their components. It describes window air conditioning systems, split air conditioning systems, centralized air conditioning systems, and packaged air conditioning systems. It also discusses new technologies like district cooling systems and chilled beam systems. The cooling cycle/refrigeration cycle is explained through its key components: compressor, condenser, expansion valve, and evaporator. Requirements for coolants used in air conditioning systems are outlined.
Types of air conditioning systems
By http://be-cool.in/ - There are various types of air conditioning systems. The application of a particular type of system depends upon a number of factors like how large the area is to be cooled, the total heat generated inside the enclosed area, etc. An HVAC designer would consider all the related parameters and suggest the system most suitable for your space.
Split Air Conditioner
Window Air Conditioner
Packaged Air Conditioner
Central Air Conditioning System
More Related Content
What's hot
Lighting architecture lecture 3
The document defines key terminology used in illumination, including luminance, illuminance, lux, lumen, candela, foot-candle, efficacy, efficiency, glare, and luminaires. Luminance refers to the amount of light emitted from a surface, illuminance is the amount of light falling on a surface, and lux is a unit of illuminance or luminous flux per unit area. Glare can be direct from a light source or indirect from reflections, and causes visual discomfort or disability depending on its severity. Luminaires are lighting fixtures or fittings used to hold and distribute light sources.
Fire fighting System
Firefighting involves preventing the spread of and extinguishing unwanted fires to protect lives, property, and the environment. Smoke detectors sense smoke to indicate fires, activating alarms. Heat detectors also identify fires without smoke. Fire alarm control panels receive information from environmental sensors and control alarm equipment in response to detected fires. Fire sprinkler systems use a water distribution system and sprinkler heads that release water when temperatures reach high levels to suppress fires. Building fire protection includes additional measures like wet risers to supply water to high levels and heat and smoke vents to remove heat and smoke from building fires.
Interior Lighting Guide - Interior Lighting Bringing Rooms To Life
Interior Lighting: Bringing Rooms To Life teaches the basics of residential interior lighting. The liveaction video demonstrates how the angle, quality, and intensity of light influence how it is perceived and used.
The program explains ambient lighting, task lighting, and accent lighting. It demonstrates different kinds of lamps and lighting fixtures and shows how each contributes to the overall interior design plan.
The video is aimed at students taking introductory courses in interior design or lighting.
Electrical lighting design and calculations
For more relevant materials visit
electro-voyage.blogspot.com
In this slide, we will see how to approach the basic lighting system both manually and using software
We will have to solve a few examples and design the lighting system manually by applying the various formula of the Lumen Method.
Illumination presentation
This document discusses lighting considerations for auditoriums. It recommends a horizontal illuminance of 50 lux and a vertical illuminance of 30 lux when a projection screen is in use. It also provides tips for using automatic controls, efficient bulbs, and energy-saving fluorescents. The document outlines different types of stage lighting like fresnel, flood lights, gel lights, and par lights. It provides examples of auditorium seating capacities at the NCPA in Mumbai.
Types of Lighting and Luminaire
Sample pictures of lighting and luminaire, For architecture students having subjects such as Building Utilities; Lighting and Acoustics.
Types of air conditioner
The document discusses the main types of air conditioners, including window units, split wall units, ceiling consoles, portable units, central/compact split systems, and commercial split units. For each type, it provides a brief description and lists their advantages and disadvantages. The types vary in their installation complexity and costs, noise levels, capacity, mobility, and suitability for different size spaces.
Lighting ppt 1
This document discusses ways to reduce energy usage from lighting in buildings through green practices. It recommends using natural daylight whenever possible through proper window and skylight design. When artificial lights are needed, the right amount and type of lighting should be used based on the task. Different lighting technologies like LEDs and fluorescents are more efficient than incandescent bulbs. Automatic controls can further reduce energy by turning lights off when not needed or adjusting output based on daylight.
Illumination basic and schemes
This document provides an overview of various types of electrical lighting sources and illumination concepts. It discusses the basic terms used in illumination like luminous flux, lumen, candle power, and inverse square and Lambert's cosine laws. It then describes different electrical light sources including incandescent, fluorescent, mercury vapor, sodium vapor, neon and halogen lamps. For each light source, it explains the working principle, construction details, advantages and applications. The document serves as a useful reference for understanding various electrical lighting techniques and concepts of illumination.
Daylighting
The document discusses various techniques for designing buildings to maximize daylighting, including using light shelves, clerestories, skylights, and borrowing light from perimeter spaces. It also covers controlling sunlight and glare through window orientation, shading devices, and glazing selection. Daylight factors and simulations are addressed as metrics for evaluating daylight performance. Design strategies like narrow floorplans and atria are presented to effectively distribute daylight throughout interior spaces.
Acoustics noise reduction
NOISE REDUCTION FROM MECHANICAL EQUIPMENTS , RUBBER MOUNTS , VIBRATION ISOLATION GUIDELINES , CHARECTERISTICS OF DUCT SYSTEM , NOISE IN AC DUCTS , VIBRATION ISOLATION OF PUMPS AND GENERATORS
Passive solar, passive cooling and daylighting
This document discusses the history and principles of passive solar design. It explains that passive solar design has been used since ancient times to heat buildings using sunlight without mechanical systems. Key aspects of passive solar design include apertures to admit sunlight, thermal mass to store heat, and distribution of stored heat. The document also covers passive cooling techniques like shade trees, overhangs, and natural ventilation. Daylighting strategies are discussed as well, such as skylights and clerestories, which provide natural light while reducing energy use. The overall goal of passive design is to efficiently use sunlight and natural ventilation to provide thermal comfort in an environmentally friendly way.
Lighting design considerations
The document provides an overview of lighting design considerations for a presentation by Sandal Usmani and Momin Mohammad Zaki. It discusses key factors in lighting design including lighting quantity through task illuminance levels, and lighting quality in terms of light distribution, integration of daylighting, and considerations for the space and workplace environment. Specific design elements are outlined, such as using task and ambient lighting, minimizing light pollution and trespass, providing flexibility, and addressing color appearance, luminance, and glare.
Matheny bell neo-con_east
This seminar was presented as a CEU during the NeoCon East 2017 conference. The presentation sheds light on the pivotal role of lighting in interiors. Besides determining the fundamental principles of artificial lighting design, we’ll focus on the significance of lighting as a design element. In doing so, we’ll introduce the technical aspects of lighting design as well as the psychological impact of light on colors and material. Participants will be trained to understand the principles of lighting and its relationship to interior space; become aware of lighting techniques and fixture selection in relationship to materials and color; achieve a basic understanding of color temperatures and lighting psychology; and understand the importance of user perception in design.
Rebekah Matheny, IIDA, assistant professor, interior design, The Ohio State University, Columbus, OH
Emily Bell, IIDA, MFA design research & development candidate, The Ohio State University, Columbus, OH
If you would like to have this CEU presented to your design team, please contact Rebekah Matheny at matheny.89@osu.edu
Natural ventilation for Building Artitechture
Natural ventilation utilizes differences in air pressure, temperature and wind to ventilate buildings without mechanical systems. There are several types of natural ventilation including stack ventilation, wind towers and courtyard effects. Stack ventilation uses temperature differences to draw warm air out of tall rooms or structures. Wind towers cool incoming air through evaporation before distributing it inside. Courtyards create rising warm air that is replaced by cooler air entering at lower levels. Proper building orientation, openings, cross ventilation and tall structures can optimize natural airflow. While it provides free ventilation, natural ventilation has less control over air quality than mechanical systems.
Solar energy endesa pavilion ppt
The term Heliotropic refers to ‘sun-responsive’, or ‘solar-oriented’. Thus heliotropic housing is simply defined as
the sun oriented housing.
Lighting architecture lecture 6
Electricity is converted to light energy in lamps through heating filaments or gases. Incandescent lamps contain a tungsten filament that glows when heated by electricity, producing light but generating 90% of power as heat. Fluorescent and CFL lamps use mercury vapor and phosphors to produce light from electricity more efficiently. HID lamps like metal halide, sodium, and mercury vapor lamps are very efficient sources used for outdoor and industrial lighting.
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
This document discusses lighting design for commercial and residential spaces. It covers various topics such as:
1. The different types of light sources including incandescent, fluorescent, halogen, and LED lamps.
2. Factors that influence light quality like color temperature, color rendering index, and lighting fixtures.
3. Classifications of lighting fixtures and the different types of lighting like general, accent, task, and decorative lighting.
4. Detailed information about incandescent lamps, their construction, advantages, disadvantages and types.
Solaris, Singapore passive design strategies report
The Solaris building in Singapore uses passive design strategies to reduce energy consumption. It incorporates a spiral ramp design, naturally ventilated spaces, skylights with actuated smoke vent louvers, a rain harvesting system, and a climate responsive facade system. The skylights bring in natural light while also serving as a smoke evacuation system in emergencies. The facade uses sunshades and light shelves controlled by sensors to reduce solar heat gain and provide daylighting. These passive design features allow Solaris to achieve a 36% reduction in energy use compared to other buildings in Singapore.
Lighting design
Lighting design plays a vital role in interior spaces. There are two main types of lighting - natural lighting which uses daylight, and artificial lighting from sources like lamps. Different lighting methods like downlights, uplights, and track lighting can be used depending on the space and desired effects. Proper lighting design considers factors like illumination, color rendering, and color temperature to effectively reveal forms and direct attention.
What's hot (20)
Interior Lighting Guide - Interior Lighting Bringing Rooms To Life
Interior Lighting Guide - Interior Lighting Bringing Rooms To Life
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
Lighting Design Project (Mohd. nadeem MSC. Interior Design)
Solaris, Singapore passive design strategies report
Solaris, Singapore passive design strategies report
Viewers also liked
Air conditioning system
This document discusses different types of air conditioning systems and their components. It describes window air conditioning systems, split air conditioning systems, centralized air conditioning systems, and packaged air conditioning systems. It also discusses new technologies like district cooling systems and chilled beam systems. The cooling cycle/refrigeration cycle is explained through its key components: compressor, condenser, expansion valve, and evaporator. Requirements for coolants used in air conditioning systems are outlined.
Types of air conditioning systems
By http://be-cool.in/ - There are various types of air conditioning systems. The application of a particular type of system depends upon a number of factors like how large the area is to be cooled, the total heat generated inside the enclosed area, etc. An HVAC designer would consider all the related parameters and suggest the system most suitable for your space.
Split Air Conditioner
Window Air Conditioner
Packaged Air Conditioner
Central Air Conditioning System
Air conditioning-system ppt
This presentation discusses air conditioning systems. It begins with an introduction by the course teacher and lists the group members. The presentation then covers the history of air conditioning, including its invention in 1902. It describes four main types of air conditioning systems: window, split, central, and packaged. It includes diagrams of cooling circuits and discusses new technologies like district cooling and chilled beam systems. The presentation highlights advantages like comfort and efficiency but also notes disadvantages such as cost. It concludes that air conditioning systems provide comfort from hot and cold weather and lists references used.
Types of air conditioning for HVAC application
This document discusses different types of air conditioning units for both domestic and commercial use. It describes portable, wall/window, split-system, ducted, and other unit types for homes. For commercial spaces, it covers evaporative cooling systems, variable refrigerant flow systems, medium/large ducted systems, and energy recovery systems. The document provides details on how each system works and typical costs. It emphasizes the benefits of inverter technology and discusses important considerations for choosing and installing different air conditioning options.
Refrigration & air conditioning
This document provides an overview of refrigeration and air conditioning systems. It begins by explaining that refrigeration and air conditioning are used to cool products or environments. It then discusses the basic refrigeration cycle involving heat absorption and rejection. The document outlines different types of refrigeration systems, including vapor compression and vapor absorption. It also describes window air conditioners and split air conditioners. The working of a split AC is explained, noting that it splits the hot and cold sides with the evaporator inside and condenser outside. In closing, the document thanks the reader for their attention.
HVAC Basic Concepts of Air Conditioning
This document provides an overview of basic air conditioning concepts and typical all-air HVAC systems. It describes the major components, including coils, fans, dampers, and control systems. Typical AC units discussed are rooftop packages, split systems, chilled water air handlers, and VAV systems. The document also outlines equipment types, control types, and provides some basic rules of thumb for HVAC design and operation.
Air Conditioning System
What is meant by “Airconditioning”?
Human Comfort
Why do we need A.C.?
Advantages and Disadvantage of A.C.
Ideal room temperature
some terminology-
Dry-bulb temperature
Wet-bulb temperature:
Dew point
Latent heat
Absolute humidity
Relative humidity
Specific humidity
Sensible heat
Evaporating Cooling
Condensation
Enthalpy
Entropy
7. Classification of air conditioners
8. Windows AC- advantages
Parts of the Window Air Conditioners
Working
The refrigeration system,
Air circulation system-room air cycle and
The hot air cycle.
Ventilation system,
Control system,
electrical protection system.
9.Split or Ductless AC-
Advantages, parts indoor and outdoor,
Types-
Wall mounted
Floor mounted/Tower AC
Ceiling mounted/Cassette AC
Multi Split ACs
10. Central Air Conditioning System
Advantages and disadvantages
11. Key differences between "Window", "Split" and a "cassette" air conditioners.
12. Cooling capacity
13. Energy Efficiency
14.Energy Consumption
15.Energy Efficiency Ratio
16.Energy Saving Methods
17.Some AC brands
Central Ac Powerpoint
This document discusses central air conditioning systems. It introduces the authors and defines air conditioning as cooling and dehumidifying indoor air for thermal comfort. It describes the main components of a central air conditioning system, which includes a two-stage compressor, condensing unit, evaporating unit known as an air handling unit, ducts, filters, thermostats, and optional auxiliary units. The document distinguishes between comfort air conditioning for buildings and process air conditioning designed for specific industrial processes.
Hvac presentation for beginers
This document provides an overview of HVAC (heating, ventilation, and air conditioning) systems. It defines HVAC as the control of air temperature, moisture content, and proper air movement to maintain acceptable air quality. It then describes common HVAC applications in buildings and industries. The document outlines the basic components and operating cycle of air conditioning systems. It also discusses factors to consider when selecting and designing HVAC systems, such as cooling load calculations, equipment types, ducting, and air distribution. Finally, it covers recent trends toward more energy efficient HVAC equipment and controls.
Building services project 2
The document provides specifications for electrical and plumbing symbols used in schematic drawings. It includes symbols for lighting fixtures like ceiling downlights and wall lights, switches, air conditioners, distribution boards, and more. Regulations are presented for safely installing conductors, switches, and protecting apparatus from external factors. Plumbing guidelines specify installing hot water systems, traps, vent pipes, and preventing drainage systems from being used as vents. Roof drainage and preventing dampness in buildings is also addressed.
Commonly used lab apparatus
This document provides descriptions of common laboratory equipment used in chemistry labs. It describes beakers, Bunsen burners, test tubes, test tube holders, racks, tripods, droppers, scoopulas, forceps, microscopes, Erlenmeyer flasks, stirring rods, microscope slides, wire mesh, funnels, evaporating dishes, utility clamps, wash bottles, watch glasses, thermometers, graduated cylinders, crucible tongs, and deflagrating spoons. Each piece of equipment has a specific purpose, such as holding liquids, providing heat, transferring solids, or viewing small objects.
Presentation1
This document outlines the expertise of an engineer certified in building facilities design and construction supervision, including mechanical, electrical, plumbing, and HVAC system design; building insulation, water piping, and sewage design; engineering consulting; and pool equipment design and water treatment system design. The engineer collaborates with architects and developers and provides consulting services including mechanical and electrical system design, project management, and risk analysis.
Presentation on hvac pre filtration
The document discusses HVAC pre-filtration systems, which first eliminate large particles through pre-filtration before forced air circulation removes smaller particles. There are three main types of HVAC pre-filters: pocket filters, disposable pleated filters, and disposable panel filters. HVAC pre-filters are designed to have low pressure drops during pre-filtration, can handle filtration pressures up to 800 kPa, and remove dust particles ranging from millimeters to microns in size.
Types of air conditioners
There are several types of air conditioners: window ACs are inexpensive but require a window for installation; split ACs have an internal unit that takes up less space and are usually quieter than window ACs; tower ACs are suitable for high-capacity cooling of large rooms without needing windows or wall installation; cassette ACs save the most space and can cool large areas other ACs can't reach; cube ACs can be mounted near ceilings or windows and have improved fans and blades for fast, efficient cooling.
Magnetic refrigerator
Magnetic refrigeration uses the magnetocaloric effect to achieve cooling through a thermodynamic cycle that involves magnetizing and demagnetizing a material. It was discovered in 1881 and further developed in the 1920s-1930s to achieve temperatures below 1K. Recent research has focused on materials with giant magnetocaloric effects and developing practical refrigerator designs. Magnetic refrigeration offers higher efficiency and lower costs than vapor compression refrigeration, with benefits for the environment and new technologies. Further development is still needed to address challenges like improving magnetocaloric materials and precision moving parts.
Refrigeration
Slide deals with the brief explanation on refrigeration which is one of the most important application of our lives.
The slide will be helpful for students studying Basic Mechanical engineering.
Viewers also liked (16)
Similar to Types of air conditioner
Choosing the Best AC for Your Home.pdf
Economic growth and a rise in purchasing power have allowed the average middle-class family to live a healthy and comfortable life. Although once thought of as an expensive product, buying of air conditioning units nowadays occupies an important place in nearly every middle-class home and in metropolitan areas and even in smaller towns. The wide variety of brands and choices has made people more aware of their requirements due to the advancement of technology, benefits for healthcare as well as energy efficiency. Based on the needs of consumers and local climate trends and health issues, manufacturers are launching highly efficient 5-star ACs which are well constructed and come with value-added features. Looking for Air Conditioner Fazal Sons provide best AC Prices.
Choosing the Best AC for Your Home.pptx
Economic growth and a rise in purchasing power have allowed the average middle-class family to live a healthy and comfortable life. Although once thought of as an expensive product, buying of air conditioning units nowadays occupies an important place in nearly every middle-class home and in metropolitan areas and even in smaller towns. The wide variety of brands and choices has made people more aware of their requirements due to the advancement of technology, benefits for healthcare as well as energy efficiency. Based on the needs of consumers and local climate trends and health issues, manufacturers are launching highly efficient 5-star ACs which are well constructed and come with value-added features. Looking for Air Conditioner Fazal Sons provide best AC Prices.
Choosing the Best AC for Your Home!.ppt
Fazal Sons Electronics provides a wide range of DC Inverters with affordable DC Inverters Prices in Pakistan. Experience peace of mind and convenience with Fazal Sons Electronics as you explore the best DC inverter prices in Pakistan.
Visit us:
https://fazalsons.pk/product-category/air-conditioner/dc-inverter/
Ductless air Conditioning—What are the Benefits
If you want to reduce your electric bills choose ductless air conditioning. It is also great for those who are irritated by the noise of regular air conditioners. These units are built without central air systems.
Pros and cons of split system air conditioning
Split system conditioners are ductless and they can be great for use in both residential and commercial buildings. Just like central air conditioning systems, the split air conditioning systems have two main components, one being the outdoor compressor/condenser and the other being the indoor air-handling unit.
We provide information on HVAC and air conditioning including split system air conditioning. Check our website for more details.
Baseboard covers
Our Baseboarders baseboard heater covers are the number one choice of remodelers and home owners who want their old baseboard radiators to look and perform like new. Our covers have won numerous awards and are recognized as the premier baseboard heater improvement product.http://www.ventandcover.com/categories/baseboard-covers.html.
Vent and covers
Vent covers can be used for floor vent covers, air return grills, wall vent covers, soffit covers, cold air return vent covers, central air, and heating vents and register vent covers. We can also create a custom design or a vintage pattern to fit your needs. For more information visit: http://www.ventandcover.com/
Common Air Conditioning Units
Air conditioning units are major home appliances designed to control the temperature and humidity in your home. There are many Air Conditioner alternatives designed to meet your specific need. It is very important to know what type of AC you need to meet your need.
Advantages & Disadvantages of Ducted and Split System Air Conditioners - Air ...
Advantages & Disadvantages of Ducted and Split System Air Conditioners - Air ...Gold Coast Air-Care Group
Here we are providing some important Advantages & Disadvantages of Ducted and Split System Air Conditioners. These will be helpful when you choose your perfect AC. For more please visit - Caregroup.Com.AUCentral Air Conditioning vs. Window Units Pros and Cons.pptx
When it comes to cooling your home, you have several options to choose from, including central air conditioning and window units. Both systems have their own set of advantages and disadvantages, and understanding the differences between them can help you make an informed decision. In this blog,
Types of Air Conditioner
An air conditioner, also known as an AC or A/C, is a device that is designed to cool and dehumidify the air in a room or a building. It works by drawing in warm air from the room, passing it over a refrigerant coil that removes the heat and moisture from the air, and then blowing the cooled and dehumidified air back into the room.
types of air conditioner
" Ace technomark as a reputable and trustworthy air conditioner dealer in Noida. we offer a wide range of high air conditioner quality air conditioner brands and models. Customers will be more likely to trust and buy from a dealer that offers a variety of reputable brands and models. This includes being knowledgeable about the products, being available to answer questions and providing after-sales support. Offering competitive pricing on air conditioners will attract customers and set Ace Technomark apart from other dealers.
"
Finding The Best Wall Mounted Air Conditioning Unit For Your Space.pdf
As the temperature climbs, beating the heat is a top priority. And when it comes to indoor comfort, a reliable air conditioner is essential. Wall mounted units provide powerful and convenient cooling while being far less obtrusive than window rattlers. Compact, quiet, and designed for simplicity, a quality wall mounted air con unit may be the ideal temperature control solution for bedrooms, studios, offices, nurseries and other mid-sized spaces in a home or apartment.
Air condition.pptx
The document provides an overview of HVAC (heating, ventilation, and air conditioning) systems. It describes the basic components and working principles of HVAC systems, including air return setups, filters, heating/cooling elements, compressors, blowers, coils, ducts, and vents. It also discusses different types of HVAC systems like split, hybrid split, duct-free mini-split, and packaged systems. The document highlights advantages and disadvantages of each type. Finally, it explains the general working of HVAC systems involving air intake, heating/cooling, and distribution through ducts.
Air Conditioning Systems and Refrigerant R22
The document discusses different types of air conditioning systems including window units, split units, packaged units, and central air conditioning. It describes the basic components and workings of window units, and provides examples of their applications in homes and small buildings. Split units are explained as having indoor and outdoor components connected by refrigerant lines. Central air conditioning is used for large commercial buildings due to its ability to cool multiple rooms uniformly. The refrigerant R-22 is described as widely used but being phased out due to environmental impacts.
2015 x472 class 02 - generation systems
This document provides an overview of an HVAC system design course. It outlines the course schedule, instructors, and topics to be covered over 10 classes. These include generation systems, distribution systems, central plants, specialty building types, codes, and life-cycle cost analysis. The document also provides a high-level overview of common HVAC system types for different building sizes, from single story to high-rise and campus-scale systems. It discusses key considerations for multi-story building system design.
Air conditioner buying guide for beginners
Learn how to choose the best suited air conditioner for your home or office. Simple guidelines from experienced HVAC experts. Air conditioning tips, easy to understand and follow.
Amazing All Kinds of Air Conditioner System with Photos.pdf
appliances found in a house.
Air conditioner System are widely used electrical appliances in homes, offices, and shopping stores. They are an integral part of most households, with nearly every home having some type of air conditioner installed.
2015 x472 class 02 - generation systems
This document outlines a course on HVAC system design. It discusses various HVAC systems for different building types, including single story, multi-story, high-rise, and specialty buildings. The schedule lists topics like generation systems, distribution systems, and system selection that will be covered over the course by three instructors.
Pile Chapter 11 Technical Ym
The document discusses various technical systems that interior designers should have knowledge of, including mechanical, electrical, plumbing, HVAC, lighting, acoustics, security, communication, and vertical transportation systems. It describes factors that influence thermal comfort like temperature, humidity, air quality and movement. It also discusses renewable energy sources for HVAC like geothermal and solar energy. Plumbing systems are also covered along with issues around noise control and building codes that interior designers must follow.
Similar to Types of air conditioner (20)
Advantages & Disadvantages of Ducted and Split System Air Conditioners - Air ...
Advantages & Disadvantages of Ducted and Split System Air Conditioners - Air ...
Central Air Conditioning vs. Window Units Pros and Cons.pptx
Central Air Conditioning vs. Window Units Pros and Cons.pptx
Finding The Best Wall Mounted Air Conditioning Unit For Your Space.pdf
Finding The Best Wall Mounted Air Conditioning Unit For Your Space.pdf
Amazing All Kinds of Air Conditioner System with Photos.pdf
Amazing All Kinds of Air Conditioner System with Photos.pdf
Recently uploaded
Siddhivinayak temple timings Houston, TX
Stay updated on Siddhivinayak Temple events and timings in Houston, TX. Join our spiritual and community gatherings. Visit us now! gaurisiddhivinayak.org
Biomass Briquettes A Sustainable Solution for Energy and Waste Management..pptx
Biomass Briquettes A Sustainable Solution for Energy and Waste Management..pptxECOSTAN Biofuel Pvt Ltd
Biomass briquettes are an innovative and environmentally beneficial alternative to traditional fossil fuels, providing a long-term solution for energy production and waste management. These compact, high-energy density briquettes are made from organic materials such as agricultural wastes, wood chips, and other biomass waste, and are intended to reduce environmental effect while satisfying energy demands efficiently. Exceptional Landscape Architecture Services in Melbourne
Landscape Architect Melbourne specializes in designing stunning, sustainable outdoor spaces that blend creativity with functionality. From lush gardens to innovative urban landscapes, they transform environments into aesthetically pleasing, eco-friendly havens. Their expertise ensures each project harmonizes with its surroundings, enhancing Melbourne's unique urban character while promoting environmental stewardship.
eBrand Promotion Full Service Digital Agency Company Profile
eBrandpromotion.com is Nigeria’s leading Web Design/development and Digital marketing agency. We’ve helped 600+ clients in 24 countries achieve growth revenue of over $160+ Million USD in 12 Years. Whether you’re a Startup or the Unicorn in your industry, we can help your business/organization grow online. Thinking of taking your business online with a professionally designed world-class website or mobile application? At eBrand, we don’t just design beautiful mobile responsive websites/apps, we can guarantee that you will get tangible results or we refund your money…
Best Web Development Frameworks in 2024
Best Web Development Frameworks: In 2024, the landscape of web development frameworks is diverse, with different frameworks excelling in various aspects such as 1. React, 2. Jquery, 3. MySQL, and 4. ASP.NET. With a strategic blend of manual testing and cutting-edge automated tools, we guarantee a flawless user experience. Partner with Growth Grids and elevate your software quality to new heights.
Contact Us :-
Email: [business@growthgrids.com]
Phone: [+91-9773356002]
Website : https://growthgrids.com
Electrical Testing Lab Services in Dubai.pdf
An electrical testing lab in Dubai plays a crucial role in ensuring the safety and efficiency of electrical systems across various industries. Equipped with state-of-the-art technology and staffed by experienced professionals, these labs conduct comprehensive tests on electrical components, systems, and installations.
Material Testing Lab Services in Dubai.pdf
Dubai is home to numerous advanced material testing labs, offering state-of-the-art facilities for a wide range of industries. These labs provide critical services such as mechanical testing, chemical analysis, and non-destructive testing, ensuring the quality and durability of materials used in construction, aerospace, and manufacturing.
Best Immigration Consultants in Amritsar- SAGA Studies
Want to fulfill your study abroad dream? Searching for the best Immigration Consultants?
SAGA Studies is the best immigration consultants in Amritsar, provides student admissions, study visa, spouse and dependent visas, tourist visas, PTE exam assistance,and many more.
The best Social Media Spy Apps for Catching Your Unfaithful Wife.pdf
Do you want to Monitor your Partner's Social media?
Generate Revenue with Contact Center Business Model Strategy
Transform your contact center business model into a revenue-generating powerhouse with strategic insights and operational excellence.
Enhance Your Home with Professional Painting Services
By refining the layout and replacing furnishings, people can more effectively enjoy themselves in their home environment. If you want to enhance the visual appeal of your home, then residential painting services are at your service. We take responsibility for transforming your dull spaces into vibrant ones. This PPT unveils the difference that professional painters make in elevating the look of your home.
Visions of Reality Inspiring Innovations from MIT Reality Hack 2024.
The MIT Reality Hack 2024 brought together over 500 visionaries in VR, AR, MR, and XR, transforming my view on what I had skeptically called "computational illusions."
Top 10 Proven Ways for Optimizing a WordPress Website for SEO.pptx
Designing a WordPress website for SEO involves a combination of technical optimization, content strategy, and user experience considerations. Some of the leading WordPress developers of the best web design company in Delhi are here with some useful ways –
https://www.edtech.in/services/website-designing-development-company-delhi.htm
How Live-In Care Benefits Chronic Disease Management.pdf
Explore how live-in care can significantly benefit chronic disease management, enhancing the quality of life for those affected and providing peace of mind for their families.
Material Testing Lab Services in Dubai.pptx
Dubai is home to numerous advanced material testing labs, offering state-of-the-art facilities for a wide range of industries. These labs provide critical services such as mechanical testing, chemical analysis, and non-destructive testing, ensuring the quality and durability of materials used in construction, aerospace, and manufacturing.
Electrical Testing Lab Services in Dubai.pptx
An electrical testing lab in Dubai plays a crucial role in ensuring the safety and efficiency of electrical systems across various industries. Equipped with state-of-the-art technology and staffed by experienced professionals, these labs conduct comprehensive tests on electrical components, systems, and installations.
The Fraud Examiner’s Report – What the Certified Fraud Examiner Should Know
The Fraud Examiner’s Report – What the Certified Fraud Examiner Should KnowGodwin Emmanuel Oyedokun MBA MSc PhD FCA FCTI FCNA CFE FFAR
The Fraud Examiner’s Report –
What the Certified Fraud Examiner Should Know
Being a Virtual Training Paper presented at the Association of Certified Fraud Examiners (ACFE) Port Harcourt Chapter Anti-Fraud Training on July 29, 2023.
How Long Does Vinyl Siding Last and What Impacts Its Life Expectancy?
The majority of siding industry insiders assert that vinyl has a 20–40-year lifespan. Although this lifetime indicates an increase over earlier siding types, the average life expectancy is heavily dependent on outside factors. Vinyl siding needs to be carefully maintained, especially after a weather event. Dive into ppt to know How Long Does Vinyl Siding Last and What Impacts Its Life Expectancy.
Understanding Love Compatibility or Synastry: Why It Matters
Love compatibility, often referred to as synastry in astrological terms, is the study of how two individuals’ astrological charts interact with each other.
Recently uploaded (20)
Biomass Briquettes A Sustainable Solution for Energy and Waste Management..pptx
Biomass Briquettes A Sustainable Solution for Energy and Waste Management..pptx
Exceptional Landscape Architecture Services in Melbourne
Exceptional Landscape Architecture Services in Melbourne
eBrand Promotion Full Service Digital Agency Company Profile
eBrand Promotion Full Service Digital Agency Company Profile
Best Immigration Consultants in Amritsar- SAGA Studies
Best Immigration Consultants in Amritsar- SAGA Studies
The best Social Media Spy Apps for Catching Your Unfaithful Wife.pdf
The best Social Media Spy Apps for Catching Your Unfaithful Wife.pdf
Generate Revenue with Contact Center Business Model Strategy
Generate Revenue with Contact Center Business Model Strategy
Enhance Your Home with Professional Painting Services
Enhance Your Home with Professional Painting Services
Visions of Reality Inspiring Innovations from MIT Reality Hack 2024.
Visions of Reality Inspiring Innovations from MIT Reality Hack 2024.
Top 10 Proven Ways for Optimizing a WordPress Website for SEO.pptx
Top 10 Proven Ways for Optimizing a WordPress Website for SEO.pptx
How Live-In Care Benefits Chronic Disease Management.pdf
How Live-In Care Benefits Chronic Disease Management.pdf
The Fraud Examiner’s Report – What the Certified Fraud Examiner Should Know
The Fraud Examiner’s Report – What the Certified Fraud Examiner Should Know
How Long Does Vinyl Siding Last and What Impacts Its Life Expectancy?
How Long Does Vinyl Siding Last and What Impacts Its Life Expectancy?
Understanding Love Compatibility or Synastry: Why It Matters
Understanding Love Compatibility or Synastry: Why It Matters
Types of air conditioner
- 1. Types of Air Conditioners facebook.com/melbaircon http://www.melbaircon.com.au/
- 2. Types of Air Conditioners In the market there are many types of systems by air-conditioned, here we try to explain the most common form and function, which may be trying to detail their advantages and disadvantages. This description should not be taken as absolute and those for each type there are different versions and always depend on where you are going to install. facebook.com/melbaircon www.melbaircon.com.au
- 3. Types of Domestic air Conditioners Window Air Conditioner A square box contains all the functional parts of the system. It should be placed in a hole practiced wall so that it is half the appliance outside and half inside. Advantages: Low cost of installation. Easy maintenance. Disadvantages: They tend to consume a little more power. They are usually noisy and in some communities are not allowed to have to make a large hole in the building wall. facebook.com/melbaircon www.melbaircon.com.au
- 4. Types of Domestic air Conditioners Split wall mounted Split wall are the equipments that are being installed today as they have many advantages over the window and are relatively inexpensive. The unit contains the compressor is located outside the building and is connected to the indoor unit (evaporator – condenser) by tubing so the hole that you have to practice on the wall is relatively small. The variety offered is very wide powers. Advantages: Noise levels are very low and are very aesthetic, especially the next generation. Maintenance is simple. Disadvantages: The installation is more complicated than in the model window so its cost is higher. It is difficult to place in specific sites, such as pre-fabricated parades. facebook.com/melbaircon www.melbaircon.com.au
- 5. Types of Domestic air Conditioners Ceiling Console Its operation is similar to the wall but, usually, larger capacity. Its installation is more costly and complex. Advantages: High capacity in a single unit (from 36,000 to 60,000 BTU) very suitable for large spaces. Disadvantages: High cost of installation. They tend to be noisier. facebook.com/melbaircon www.melbaircon.com.au
- 6. Types of Domestic air Conditioners Portable Air Conditioner Entire system incorporated in a box attached with wheels so that it can be transported easily from one room to another. It features a flexible hose that expels hot air out. Advantages: Does not require installation. Are easily transported and emit very little noise. Disadvantages: They tend to be quite expensive when you consider the value. They are not very powerful. facebook.com/melbaircon www.melbaircon.com.au
- 7. Types of Domestic air Conditioners Central (compact or split system) The idea is the same as in Split type, but installation is much higher. It is used in full conditioning of buildings. Their cost is too high but offers a high level of comfort. Advantages: Adds a high value on the home you have them. Maintenance is simple and spaced in time. Disadvantages: High cost of installation, operation, duct, ceiling panels and ceiling. facebook.com/melbaircon www.melbaircon.com.au
- 8. Types of Commercial Air Conditioners Split (wall bracket) This model solves needs local small shops and cafes as internet cafés, hairdressers, barbers, small venues, etc. Advantages: easy installation and relatively low cost of it. More spacing and relatively easy maintenance. Disadvantages: You must apply in areas with few gaps because they do not have a shot of strong air. Premises should tend to be square rather than very “rectangular” (a very long corridor for example). Low capacity. facebook.com/melbaircon www.melbaircon.com.au