Presentation1
•Download as PPTX, PDF•
1 like•181 views
This document outlines the expertise of an engineer certified in building facilities design and construction supervision, including mechanical, electrical, plumbing, and HVAC system design; building insulation, water piping, and sewage design; engineering consulting; and pool equipment design and water treatment system design. The engineer collaborates with architects and developers and provides consulting services including mechanical and electrical system design, project management, and risk analysis.
Report
Share
Report
Share
Recommended
Building Technology Discussion for Facilities Managers
Discussion of the parts and components of a Building and the Enclosure related to facility design and construction
Presentation on hvac pre filtration
The document discusses HVAC pre-filtration systems, which first eliminate large particles through pre-filtration before forced air circulation removes smaller particles. There are three main types of HVAC pre-filters: pocket filters, disposable pleated filters, and disposable panel filters. HVAC pre-filters are designed to have low pressure drops during pre-filtration, can handle filtration pressures up to 800 kPa, and remove dust particles ranging from millimeters to microns in size.
HVAC Systems
This document certifies that Mr. Mortada Ahmedelhaj Mohamedelnoor Elmahdi successfully completed an HVAC Systems Training Session over 80 hours from February 1, 2016 to March 7, 2016. The training covered topics such as indoor air quality, HVAC components and systems, refrigeration, psychrometrics, heating and cooling load calculations, duct design, and piping. Mr. Elmahdi was trained in the use of Autodesk software and was issued the certificate in Khartoum, Sudan on May 30, 2016.
Cooling and heating load calculations tide load4z
The document discusses cooling and heating load calculation methods for buildings. It describes the complex factors that influence load results, including building envelope properties, internal heat sources, occupancy patterns, and weather. The traditional CLTD/CLF method uses tables to account for these factors, while newer methods like Heat Balance are more complex numerical simulations. However, the newer methods still have limitations and uncertainties around inputs like internal loads, duct losses, and infiltration that make load calculations challenging. The primary source of uncertainty is predicting occupant behavior and equipment usage rather than the calculation method itself.
Types of air conditioner
Here you get a clear idea about all types of air conditioner. Both Domestic and commercial air conditioner. Also get website of Melbourne Air conditioning & Heating's. From where you will get the Air conditioning service information near Melbourne, victoria area
Types of air conditioning for HVAC application
This document discusses different types of air conditioning units for both domestic and commercial use. It describes portable, wall/window, split-system, ducted, and other unit types for homes. For commercial spaces, it covers evaporative cooling systems, variable refrigerant flow systems, medium/large ducted systems, and energy recovery systems. The document provides details on how each system works and typical costs. It emphasizes the benefits of inverter technology and discusses important considerations for choosing and installing different air conditioning options.
JBruceHVAC
This document details the HVAC design for a shipping container home in Orlando, Florida. It calculates the cooling load from transmission through composite walls, solar radiation on windows and roof, and air infiltration. It determines the minimum fresh air requirements for two occupants and selects an air filter. Finally, it sizes the air conditioning system by analyzing the psychrometric processes and compressor capacity.
Pullen AC Installation Presentation
This document provides information about Pullen Air Conditioning and the services they offer. Pullen Air Conditioning has been in business since 1966 providing HVAC services and is NATE certified. They perform thorough manual J load calculations and design systems professionally. Pullen Air Conditioning employs factory trained and service oriented technicians. They provide options for new installations, repairs, maintenance agreements, and financing.
Recommended
Building Technology Discussion for Facilities Managers
Discussion of the parts and components of a Building and the Enclosure related to facility design and construction
Presentation on hvac pre filtration
The document discusses HVAC pre-filtration systems, which first eliminate large particles through pre-filtration before forced air circulation removes smaller particles. There are three main types of HVAC pre-filters: pocket filters, disposable pleated filters, and disposable panel filters. HVAC pre-filters are designed to have low pressure drops during pre-filtration, can handle filtration pressures up to 800 kPa, and remove dust particles ranging from millimeters to microns in size.
HVAC Systems
This document certifies that Mr. Mortada Ahmedelhaj Mohamedelnoor Elmahdi successfully completed an HVAC Systems Training Session over 80 hours from February 1, 2016 to March 7, 2016. The training covered topics such as indoor air quality, HVAC components and systems, refrigeration, psychrometrics, heating and cooling load calculations, duct design, and piping. Mr. Elmahdi was trained in the use of Autodesk software and was issued the certificate in Khartoum, Sudan on May 30, 2016.
Cooling and heating load calculations tide load4z
The document discusses cooling and heating load calculation methods for buildings. It describes the complex factors that influence load results, including building envelope properties, internal heat sources, occupancy patterns, and weather. The traditional CLTD/CLF method uses tables to account for these factors, while newer methods like Heat Balance are more complex numerical simulations. However, the newer methods still have limitations and uncertainties around inputs like internal loads, duct losses, and infiltration that make load calculations challenging. The primary source of uncertainty is predicting occupant behavior and equipment usage rather than the calculation method itself.
Types of air conditioner
Here you get a clear idea about all types of air conditioner. Both Domestic and commercial air conditioner. Also get website of Melbourne Air conditioning & Heating's. From where you will get the Air conditioning service information near Melbourne, victoria area
Types of air conditioning for HVAC application
This document discusses different types of air conditioning units for both domestic and commercial use. It describes portable, wall/window, split-system, ducted, and other unit types for homes. For commercial spaces, it covers evaporative cooling systems, variable refrigerant flow systems, medium/large ducted systems, and energy recovery systems. The document provides details on how each system works and typical costs. It emphasizes the benefits of inverter technology and discusses important considerations for choosing and installing different air conditioning options.
JBruceHVAC
This document details the HVAC design for a shipping container home in Orlando, Florida. It calculates the cooling load from transmission through composite walls, solar radiation on windows and roof, and air infiltration. It determines the minimum fresh air requirements for two occupants and selects an air filter. Finally, it sizes the air conditioning system by analyzing the psychrometric processes and compressor capacity.
Pullen AC Installation Presentation
This document provides information about Pullen Air Conditioning and the services they offer. Pullen Air Conditioning has been in business since 1966 providing HVAC services and is NATE certified. They perform thorough manual J load calculations and design systems professionally. Pullen Air Conditioning employs factory trained and service oriented technicians. They provide options for new installations, repairs, maintenance agreements, and financing.
Calculation Summary
This document summarizes the HVAC system design for an office building with 6,472 square meters of floor area located in London. It provides details on the building specifications, calculated cooling and heating loads, and peak load results. The peak cooling load is 514,743 Watts in July at 2:00 PM, while the peak heating load is 238,349 Watts. The document also includes load summaries for 10 individual spaces within the building.
Hvac presentation
The Siemens Room Renovation project involved replacing the HVAC system in room E 219 of the Olmsted Building. An ME team analyzed the old fan coil system and considered three replacement options: a two-pipe fan coil system, variable air volume system, and chilled beam system. They determined the updated fan coil system would be the most cost effective solution. The project scope was to research systems, install and commission the new HVAC by spring 2015, and benchmark the installed system.
Load calculation
This document summarizes how simplified load calculation spreadsheets can provide quick answers for early conceptual design without relying on traditional rules of thumb. It describes how the ASHRAE radiant time series method spreadsheets allow engineers to easily calculate block loads for different building designs, locations, and orientations in less than an hour. The document also examines how standards have impacted typical rules of thumb over time by recalculating loads for a common office building using past code requirements.
Engineering plant facilities 14 fundamental questions worksheet
The document contains questions about HVAC systems and their components, mechanical systems, pumps, fire protection systems, kitchen equipment, vertical transportation, facility layouts, and facility maintenance. It includes questions asking to draw diagrams, describe purposes, functions, and components of various HVAC, mechanical, and facility systems. Definitions and descriptions are also requested for technical terms related to these fields.
Cooling load calc
The document discusses cooling load calculation and defines key terms:
1) Space heat gain is the rate of heat entering a space, while space cooling load is the rate of heat removed to maintain a constant temperature.
2) Cooling load temperature difference (CLTD) and cooling load factor (CLF) are used to convert sensible heat gain to sensible cooling load.
3) Space cooling load has external, internal, and ventilation components. External loads include solar heat gain and conduction heat gain through windows.
Cooling Load Calculation
The document describes the process of calculating the cooling load of a room using the Cooling Load Temperature Difference (CLTD) Method. It involves calculating the transmission load through the walls and roof by determining their areas, U-values, and CLTD corrections. The solar heat gain through windows is also calculated. Internal loads from lighting, equipment, and occupancy are estimated. The total cooling load is calculated by summing the transmission load, solar gain, internal load, and occupancy load, which comes out to be 9170.97 watts or around 2.5 to 3 tons for air conditioning unit selection.
Strategy Guideline: Accurate Heating and Cooling Calculations
This document provides an overview of the importance of accurate heating and cooling load calculations for properly sizing HVAC systems. It discusses how common "safety factors" that manipulate inputs can significantly inflate load calculations, leading to oversized systems. Two example houses are modeled under various manipulated conditions to demonstrate potential load increases. Combining multiple adjustments can increase loads by over 150%, risking a system 3 tons too large. Oversizing causes higher costs, reduced efficiency, comfort issues, and potential durability problems from short-cycling of equipment. Accurate load calculations considering all building characteristics are necessary for right-sizing HVAC systems.
Chapter 7 heating ventilation air conditioning
This document discusses heating, ventilation, and air conditioning (HVAC) systems for homes. It describes the importance of properly sizing and installing the HVAC system to ensure efficiency and comfort. The two most common systems are forced-air, which uses ducts to distribute heated or cooled air, and radiant, which uses pipes to transport hot water or steam. Forced-air systems are more common and can include gas furnaces, heat pumps, or dual-fuel systems. Heat pumps are more efficient for heating than electric resistance systems. Geothermal heat pumps use underground pipes to exchange heat with the earth for greater efficiency than air-source heat pumps. Proper installation and maintenance of any HVAC system is critical for
What Is A HVAC Load Calculation And Why Is It Important?
An HVAC load calculation is a mathematical process that determines the best size, type, and style of HVAC system for a home by verifying details like square footage, windows, insulation, and ductwork. It is important to have a load calculation done before replacing an HVAC system because it will pick the correctly sized system, reduce energy consumption, help diagnose issues, and save money on bills. Many HVAC companies provide load calculations for free.
Quality HVAC Installation Made Easy
To save energy seal ducts. New code requirements will test ducts for air leakage. Find out the best way to seal your HVAC system whether it's a retrofit or a new system.
HVAC Service Class
This document provides an overview of HVAC systems with two parts: components and diagnosing issues. It describes the major components: furnace, air conditioner, heat pump, ducting, thermostat, line set, electricity, gas line. Each component is then broken down into smaller specialized parts and their functions are explained, such as the burner, blower, coils, fans, valves of the furnace. The air conditioner components inside and outside the home are also detailed. Thermostats, both mercury switch and digital, are reviewed. The document aims to educate homeowners on HVAC systems and when to call a technician.
RESNET: HVAC Presentation
The document discusses how performing HVAC load calculations using ACCA Manual J Version 8 can benefit energy raters. It provides an overview of Manual J, explaining that it establishes procedures for estimating room-by-room heating and cooling loads. Adhering to Manual J helps ensure proper sizing of HVAC equipment and elimination of comfort issues. It also discusses how factors like infiltration, duct leakage, and duct design influence load calculations and notes load calculations can enhance energy raters' skills and provide an additional revenue source.
Neilsoft Profile
The document describes engineering services offered by Neilsoft across various industries including buildings, infrastructure, manufacturing, transportation, energy and industrial projects. Key services listed include master planning, BIM, structural engineering, MEP engineering, civil/infrastructure design, precast design, steel detailing, industrial process engineering and material handling systems design. Neilsoft provides multi-disciplinary engineering design, detailed engineering, drawings and consultancy services to support complete project lifecycle from concept to commissioning.
Fundamental of architecture and space function and form
The document provides an overview of the architectural design process. It begins with defining architecture as both an art and science concerned with designing habitable structures. The design process involves planning, generation, and evaluation phases. It progresses from initial research and site analysis, to zone diagrams, bubble diagrams, and schematic diagrams to explore spatial relationships and layouts. This is followed by volumetric studies to consider the building form. The process culminates in preliminary and final designs with detailed plans, sections, elevations and renderings. The document emphasizes developing multiple design options at each phase to fully meet the client's brief and program requirements.
2 Architecture
This document provides information about the Architecture & Construction career cluster, including its definition as careers in designing, planning, managing, building and maintaining the built environment. It outlines several pathways within the cluster such as design/pre-construction, construction, and maintenance/operations. Specific career options are listed under each pathway, and the document concludes with knowledge and skills relevant to the cluster such as academics, communications, problem solving, safety, and technical skills.
iFluids Engineering
With focus on Innovation, Quality & inherently Safe
Design, we stays committed to Engineering Standards
and ensure Operational Safety.
Introduction ece.pptx
Civil engineering involves planning, designing, constructing, and maintaining infrastructure projects. The document discusses the main branches of civil engineering, including structural engineering (design of buildings, bridges, etc.), geotechnical engineering (soils and foundations), transportation engineering (roads, rail, airports), environmental engineering (water treatment, pollution control), and water resources engineering (dams, irrigation, flood control). It provides examples of the types of projects within each branch and potential career paths in both public and private sectors.
Career fair powerpoint
River Consulting is a leading engineering and project management firm serving energy, food, process, and industrial clients. They have over 200 engineers, consultants, and project managers with professional registrations in 42 states and several countries. River Consulting provides a wide range of services including electrical systems, material handling, silo design, marine facilities, chemical and process engineering, and food industry services.
Do you want to know more abour Progressive?
Progressive Engineering is an international engineering staffing and recruitment organization with over 25 years of experience. They specialize in recruiting technical specialists within engineering disciplines like PCB engineering, process engineering, and mechanical engineering. Progressive Engineering has global coverage and strategically places delivery teams around the world to ensure 24/7 service. They perform needs analyses for clients and source candidates from a network of over 200,000 engineers worldwide through direct search and job boards.
building process Flowchart
The building process involves several key steps:
1. Engaging with architects, designers, and consultants to develop sketch plans and refine design ideas while selecting finishes, fittings, and discussing plans with neighbors and local council.
2. Preparing construction certificates by finalizing plans, specifications, and schedules to then lodge the construction certificate for approval.
3. Choosing and checking contracts with the prime contractor that outline schedules, retentions, inclusions and exclusions, and defect liability periods before signing contracts and commencing construction.
Gl group profile r5
GreenLeaf provides engineering solutions, project management solutions, and procurement services. It offers specialized engineering services like piping design, stress analysis, gas network design, and CFD analysis. It also provides project management consulting services like project planning, monitoring, and closeout. Additionally, GreenLeaf offers training on engineering concepts, software tools, and project management.
Material engineering assignment help
Get custom services for Materials Engineering Assignment help & Materials Engineering Homework help. Our Materials Engineering Online tutors are available for instant help for Materials Engineering assignments & problems.
Materials Engineering Homework help & Materials Engineering tutors offer 24*7 services . Send your Materials Engineering assignments at support@globalwebtutors.com or else upload it on the website. Instant Connect to us on live chat for Materials Engineering assignment help & Materials Engineering Homework help
More Related Content
Viewers also liked
Calculation Summary
This document summarizes the HVAC system design for an office building with 6,472 square meters of floor area located in London. It provides details on the building specifications, calculated cooling and heating loads, and peak load results. The peak cooling load is 514,743 Watts in July at 2:00 PM, while the peak heating load is 238,349 Watts. The document also includes load summaries for 10 individual spaces within the building.
Hvac presentation
The Siemens Room Renovation project involved replacing the HVAC system in room E 219 of the Olmsted Building. An ME team analyzed the old fan coil system and considered three replacement options: a two-pipe fan coil system, variable air volume system, and chilled beam system. They determined the updated fan coil system would be the most cost effective solution. The project scope was to research systems, install and commission the new HVAC by spring 2015, and benchmark the installed system.
Load calculation
This document summarizes how simplified load calculation spreadsheets can provide quick answers for early conceptual design without relying on traditional rules of thumb. It describes how the ASHRAE radiant time series method spreadsheets allow engineers to easily calculate block loads for different building designs, locations, and orientations in less than an hour. The document also examines how standards have impacted typical rules of thumb over time by recalculating loads for a common office building using past code requirements.
Engineering plant facilities 14 fundamental questions worksheet
The document contains questions about HVAC systems and their components, mechanical systems, pumps, fire protection systems, kitchen equipment, vertical transportation, facility layouts, and facility maintenance. It includes questions asking to draw diagrams, describe purposes, functions, and components of various HVAC, mechanical, and facility systems. Definitions and descriptions are also requested for technical terms related to these fields.
Cooling load calc
The document discusses cooling load calculation and defines key terms:
1) Space heat gain is the rate of heat entering a space, while space cooling load is the rate of heat removed to maintain a constant temperature.
2) Cooling load temperature difference (CLTD) and cooling load factor (CLF) are used to convert sensible heat gain to sensible cooling load.
3) Space cooling load has external, internal, and ventilation components. External loads include solar heat gain and conduction heat gain through windows.
Cooling Load Calculation
The document describes the process of calculating the cooling load of a room using the Cooling Load Temperature Difference (CLTD) Method. It involves calculating the transmission load through the walls and roof by determining their areas, U-values, and CLTD corrections. The solar heat gain through windows is also calculated. Internal loads from lighting, equipment, and occupancy are estimated. The total cooling load is calculated by summing the transmission load, solar gain, internal load, and occupancy load, which comes out to be 9170.97 watts or around 2.5 to 3 tons for air conditioning unit selection.
Strategy Guideline: Accurate Heating and Cooling Calculations
This document provides an overview of the importance of accurate heating and cooling load calculations for properly sizing HVAC systems. It discusses how common "safety factors" that manipulate inputs can significantly inflate load calculations, leading to oversized systems. Two example houses are modeled under various manipulated conditions to demonstrate potential load increases. Combining multiple adjustments can increase loads by over 150%, risking a system 3 tons too large. Oversizing causes higher costs, reduced efficiency, comfort issues, and potential durability problems from short-cycling of equipment. Accurate load calculations considering all building characteristics are necessary for right-sizing HVAC systems.
Chapter 7 heating ventilation air conditioning
This document discusses heating, ventilation, and air conditioning (HVAC) systems for homes. It describes the importance of properly sizing and installing the HVAC system to ensure efficiency and comfort. The two most common systems are forced-air, which uses ducts to distribute heated or cooled air, and radiant, which uses pipes to transport hot water or steam. Forced-air systems are more common and can include gas furnaces, heat pumps, or dual-fuel systems. Heat pumps are more efficient for heating than electric resistance systems. Geothermal heat pumps use underground pipes to exchange heat with the earth for greater efficiency than air-source heat pumps. Proper installation and maintenance of any HVAC system is critical for
What Is A HVAC Load Calculation And Why Is It Important?
An HVAC load calculation is a mathematical process that determines the best size, type, and style of HVAC system for a home by verifying details like square footage, windows, insulation, and ductwork. It is important to have a load calculation done before replacing an HVAC system because it will pick the correctly sized system, reduce energy consumption, help diagnose issues, and save money on bills. Many HVAC companies provide load calculations for free.
Quality HVAC Installation Made Easy
To save energy seal ducts. New code requirements will test ducts for air leakage. Find out the best way to seal your HVAC system whether it's a retrofit or a new system.
HVAC Service Class
This document provides an overview of HVAC systems with two parts: components and diagnosing issues. It describes the major components: furnace, air conditioner, heat pump, ducting, thermostat, line set, electricity, gas line. Each component is then broken down into smaller specialized parts and their functions are explained, such as the burner, blower, coils, fans, valves of the furnace. The air conditioner components inside and outside the home are also detailed. Thermostats, both mercury switch and digital, are reviewed. The document aims to educate homeowners on HVAC systems and when to call a technician.
RESNET: HVAC Presentation
The document discusses how performing HVAC load calculations using ACCA Manual J Version 8 can benefit energy raters. It provides an overview of Manual J, explaining that it establishes procedures for estimating room-by-room heating and cooling loads. Adhering to Manual J helps ensure proper sizing of HVAC equipment and elimination of comfort issues. It also discusses how factors like infiltration, duct leakage, and duct design influence load calculations and notes load calculations can enhance energy raters' skills and provide an additional revenue source.
Viewers also liked (12)
Engineering plant facilities 14 fundamental questions worksheet
Engineering plant facilities 14 fundamental questions worksheet
Strategy Guideline: Accurate Heating and Cooling Calculations
Strategy Guideline: Accurate Heating and Cooling Calculations
What Is A HVAC Load Calculation And Why Is It Important?
What Is A HVAC Load Calculation And Why Is It Important?
Similar to Presentation1
Neilsoft Profile
The document describes engineering services offered by Neilsoft across various industries including buildings, infrastructure, manufacturing, transportation, energy and industrial projects. Key services listed include master planning, BIM, structural engineering, MEP engineering, civil/infrastructure design, precast design, steel detailing, industrial process engineering and material handling systems design. Neilsoft provides multi-disciplinary engineering design, detailed engineering, drawings and consultancy services to support complete project lifecycle from concept to commissioning.
Fundamental of architecture and space function and form
The document provides an overview of the architectural design process. It begins with defining architecture as both an art and science concerned with designing habitable structures. The design process involves planning, generation, and evaluation phases. It progresses from initial research and site analysis, to zone diagrams, bubble diagrams, and schematic diagrams to explore spatial relationships and layouts. This is followed by volumetric studies to consider the building form. The process culminates in preliminary and final designs with detailed plans, sections, elevations and renderings. The document emphasizes developing multiple design options at each phase to fully meet the client's brief and program requirements.
2 Architecture
This document provides information about the Architecture & Construction career cluster, including its definition as careers in designing, planning, managing, building and maintaining the built environment. It outlines several pathways within the cluster such as design/pre-construction, construction, and maintenance/operations. Specific career options are listed under each pathway, and the document concludes with knowledge and skills relevant to the cluster such as academics, communications, problem solving, safety, and technical skills.
iFluids Engineering
With focus on Innovation, Quality & inherently Safe
Design, we stays committed to Engineering Standards
and ensure Operational Safety.
Introduction ece.pptx
Civil engineering involves planning, designing, constructing, and maintaining infrastructure projects. The document discusses the main branches of civil engineering, including structural engineering (design of buildings, bridges, etc.), geotechnical engineering (soils and foundations), transportation engineering (roads, rail, airports), environmental engineering (water treatment, pollution control), and water resources engineering (dams, irrigation, flood control). It provides examples of the types of projects within each branch and potential career paths in both public and private sectors.
Career fair powerpoint
River Consulting is a leading engineering and project management firm serving energy, food, process, and industrial clients. They have over 200 engineers, consultants, and project managers with professional registrations in 42 states and several countries. River Consulting provides a wide range of services including electrical systems, material handling, silo design, marine facilities, chemical and process engineering, and food industry services.
Do you want to know more abour Progressive?
Progressive Engineering is an international engineering staffing and recruitment organization with over 25 years of experience. They specialize in recruiting technical specialists within engineering disciplines like PCB engineering, process engineering, and mechanical engineering. Progressive Engineering has global coverage and strategically places delivery teams around the world to ensure 24/7 service. They perform needs analyses for clients and source candidates from a network of over 200,000 engineers worldwide through direct search and job boards.
building process Flowchart
The building process involves several key steps:
1. Engaging with architects, designers, and consultants to develop sketch plans and refine design ideas while selecting finishes, fittings, and discussing plans with neighbors and local council.
2. Preparing construction certificates by finalizing plans, specifications, and schedules to then lodge the construction certificate for approval.
3. Choosing and checking contracts with the prime contractor that outline schedules, retentions, inclusions and exclusions, and defect liability periods before signing contracts and commencing construction.
Gl group profile r5
GreenLeaf provides engineering solutions, project management solutions, and procurement services. It offers specialized engineering services like piping design, stress analysis, gas network design, and CFD analysis. It also provides project management consulting services like project planning, monitoring, and closeout. Additionally, GreenLeaf offers training on engineering concepts, software tools, and project management.
Material engineering assignment help
Get custom services for Materials Engineering Assignment help & Materials Engineering Homework help. Our Materials Engineering Online tutors are available for instant help for Materials Engineering assignments & problems.
Materials Engineering Homework help & Materials Engineering tutors offer 24*7 services . Send your Materials Engineering assignments at support@globalwebtutors.com or else upload it on the website. Instant Connect to us on live chat for Materials Engineering assignment help & Materials Engineering Homework help
4-4_4. vm consulting company_presentation
V. Maliokas & Associates Limited is a private engineering consulting firm established in 1992 in Thessaloniki, Greece that provides design and consultancy services for environmental and infrastructure projects. The company aims for high quality and sustainable solutions. It has offices in Thessaloniki and Athens and works with an expanding network of European associates. The company's services include studies, designs, and project management for water resources, wastewater treatment, solid waste management, and other infrastructure areas while protecting the environment. The company seeks reliable solutions that satisfy clients and smoothly implement projects.
Line Card
The document describes the various services provided by Line Card, including HVAC/R design, plumbing, heating, air conditioning, fabrication, refrigeration, fire protection, and 24/7 emergency service and maintenance agreements. They offer professional engineering, CAD design, testing, balancing, and commissioning services across all of their mechanical, process control, and specialty systems areas.
CE Lec Slides, Plans.pdf
This document discusses various types of construction drawings used in engineering projects. It describes block plans, site plans, plot plans, contour plans, and their purposes. It also outlines technical drawings, sketches, details drawings, working/construction drawings, assembly drawings, component drawings, shop drawings, as-built drawings, and other drawing types like digital, preliminary, and isometric. Various construction plans like architectural, structural, road, and services drawings for electrification, water supply, sewage, and air conditioning are also summarized. Sample drawings are provided for illustration.
duties
This document outlines the duties and responsibilities of a fire protection engineer which include preparing fire safety drawings for different countries, shop drawings for firefighting systems like sprinklers and hydrants, fire alarm systems, and voice evacuation. They are also responsible for hydraulic calculations, coordination drawings, revisions, submittals, and as-built drawings. The role requires both office and site work.
Episode 32 : Project Execution Part (3)
Episode 32 : Project Execution Part (3)
Basic Grid
Cartesian Grid System
Basic Structures
Base Plates
Vertical Columns
Horizontal Platforms
Individual Foundation
Concrete Foundation
Cross beams
Equipments
Main – Vessels, Reactors, Heat Exchangers etc.
Auxiliary – Moving Equipments, Conveyer etc.
Interfaces and Outer Dimensions
Connecting dimensions for the connecting pipework
Connecting dimensions for the measurement instruments
Connecting dimensions for electrical or pneumatic drives
Position and dimensions for the point of support and mountings
Other Building Engineering
Windows, Doors, Staircase, Control Room, Ventilation etc.
SAJJAD KHUDHUR ABBAS
Ceo , Founder & Head of SHacademy
Chemical Engineering , Al-Muthanna University, Iraq
Oil & Gas Safety and Health Professional – OSHACADEMY
Trainer of Trainers (TOT) - Canadian Center of Human
Development
Structural engineer drawings
Structural engineer drawings are used to design structures using material properties and formulas. They typically show column axes, roofs, foundations, and structural details to communicate design information between engineers and contractors. Structural drawings are done by draftsmen and convert sketches into precise 2D and 3D CAD models. Shop drawings provide more fabrication details for prefabricated components to manufacturers. The development process for structural drawings involves planning, design, and providing construction guidance.
Career fair powerpoint linked in
River Consulting is an engineering firm that provides services to energy, food, process, and industrial clients. They have offices in four states and over 200 employees with professional registrations. They offer a wide range of engineering disciplines and services including electrical, mechanical, civil, structural, material handling, marine, process, piping, food industry, and control systems integration. River Consulting is recognized as a top 500 design firm for six consecutive years.
We Hire Engineers! Join our team!
Learn more about the industries we serve! Is engineering your passion? Could your expertise allow you to play an integral role on River Consulting project delivery teams? Visit www.riverconsulting.com to learn more about our ever growing company and how you can become part of our team!
TEK.FS.MED-004-M1.ppt
The document discusses piping design and components. It covers piping materials like carbon steel, alloy steel and stainless steel. Key piping elements include pipes, fittings, flanges, valves, gaskets and bolting. Common piping components are described along with relevant standards for materials, dimensions and design considerations. Factors in pipe sizing and thickness calculation are also outlined.
Ici and itd prensentation new
The document discusses civil engineering and civil and structural drawings. It defines civil engineering as designing, building, and maintaining infrastructure like roads, buildings, and water systems. It describes the roles and responsibilities of civil engineers at different project stages from pre-construction to post-construction. It also explains the different types of drawings used in civil and structural engineering projects, including tender drawings, contract drawings, working drawings, and final or as-built drawings.
Similar to Presentation1 (20)
Fundamental of architecture and space function and form
Fundamental of architecture and space function and form
Presentation1
- 1. • Certified in building facilities design and construction supervision as Grade 1. • Cooling and Heating load calculation • Cooling and Heating component design • Ventilation design • Classification and selection of HVAC systems • Duct system design • Building insulation design • Building water piping design • Building sewage (Black/Gray) design • Sewage treatment
- 2. • Involve and collaborate of architects, developers, building owners, and consulting engineers in regard to mechanical and electrical design • Electrical system calculation and design
- 3. • Gaz piping designer and supervisor • Home(Low) pressure piping • Hi pressure piping(industrial and city piping)
- 4. • Pool and related equipment, issues and accessories design • Pool water treatment, heating and filtration design
- 5. ENGINEERING • Mechanical engineering consulting • Building facilities consulting • Project manager consulting • Risk analysis consulting