This lesson plan summarizes a lesson on counters up. The trainees are 12 students studying at RCT College who vary in ability level. The lesson will take place in classroom 4.205 using a computer, projector, chairs and tables. The objectives are for students to understand different types of counters, their internal construction, and how to build counters that count up. The lesson will use various teaching methods including lecture, discussion, individual work, group work and discovery learning. Students will participate in activities, solve practice problems, and receive a lesson summary. The principles focused on making students active through discussion and collaborative work.

1. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
1.Learning Condition:
1.1: Trainees:
They are 12 trainees in class and each trainee has at the General Certificate of
Secondary Education in the natural sciences.
The learning level of the students has major differences. Performers are Abdullah,
Ahmad and Hassan. They participate very actively in class. Their contributions to
teaching are good to very good. The work orders and homework get quickly accepted.
Also the presentation of results should be assessed positively. And as we can see that
the rate of the average scores of students in general good.
The class has experience and skill in the practice of group work, partner work and
individual work and have an experience in the technical field practice, and the age of
them between 22 to 25 and all students are together along well and collaborators, also
they have ability to understand the topic well, and this is one of the most important
points of interest that is found in students. And I will make discussion with them about
everything.
1.2: Classroom:
In this classroom number 4.205 in EL building. I will use the computer and the
Projector to explain the lesson. Also, I use some chairs and tables in this classroom to
make students taking notes and doing practical work together.
To make sure the classroom clean and equipment is working, so we must go early to
organize the chairs and clean the classroom.
The lesson affects the student's activity when the students make conversation and
write the answers on the task sheet and whiteboard.

2. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
1.3: College:
RCT College is one of the best technical colleges in KSA, and there are six technical
majors is one of the most important majors in our practical life. The duration of the
study where six terms to get Diploma Certificate. The number of students is also
where about 1,200 students and 80 teachers. And there are many classrooms and
workshops for each department to compare the theoretical and practical. And also
where the curriculum is clear and contains of the theoretical part and practical part.
2. Didactic Reflection:
2.1: curriculum analysis
This course is Programmable Logic Controllers [248 ELC]. The contact hours for this
course are 4 hours. The hours of lecture are 0 hours. The hours of workshop are 4
hours. In this course the trainees will study programmable logic controllers: its
construction, its programming and applications in industrial control processes. This
course aims to introduces the trainees to the basics of PLCs elements in industry and
its implementation, programming and practical applications in industry.
2.2:content analysis
The topic is about the Programmable Logic Controllers main, my lesson counters, so
that provide how you can make counter count from 0 to 10. Also how you can build
internal construction for counters. Also, how make counters count up and how count
from 0 to 8 also 0,2,4,6,8. Finally, the trainees must know the kinds of counter and
know the internal construction for counters and what is the function of counter and
where we use it.

3. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
2.3:Didactic analysis
The trainer starts the lesson with the inductive approach by asking the trainees some
questions that lead them to find the topic of the lesson. These question, in line with
the principle of motivation, will show the important of the topic . After that, we will use
the Vertical reduction by focus on one topic of our unit topics(counters).It has
(counters up and down, asynchronous, synchronous ). But chose one topic of all is
counters up. We make interesting lesson by body language, and write clearly answer
on the whiteboard, make group work to share information and knowledge and help
each other. We use the whiteboard with good drawing, Power Point Presentation.
And we will give trainees handouts, these handout include the most important
information of the topic, but they are not completed. So, the trainees will need to
completed these information by filling the gaps during the explanation. As a result,
this method will keep trainees busy during the lesson in line with the principle of self-
activity.
Finally, the trainees will make a summary by answering some questions that cover all
parts of the lesson. In this way, the trainers can get the feedback from trainees and
make sure that objectives of the lesson are achieved.
2.4:Methodology analysis
In this lesson I will use several methods such as; Lecture, Classroom conversation,
individual work, Partner work, Group work, Discovery . Lecture is the most method
using when I teach to students on the whiteboard if the teacher explain something step
by step, or smart board if the teacher show them PowerPoint presentation . Classroom
conversation should allow all students of class as well as the teacher himself to talk to
other, discussion students together with teacher. Individual work is students work
independently on the tasks. Partner work is working in pair where only tow students
work to solve tasks during the lesson. Group work by grouping three to six students to
solve tasks and discussion together. Discovery is the modern organization of work to
target the capacity to perform occupational tasks.

4. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
3:Lesson Plan:
3.1:General Information:
Topic: counters up.
Name and ID Number: :Sultan AL-shehri(258)
Date:12/11/2014
3.2:Objectives:
General Objectives:
The Trainees:
1. follow rules of good communication. (Affective).
2. write notes about the lesson. (Cognitive).
3. distribute the work load in a group equally. (Affective).
4. listen to others with respect . (Affective).
5. organize the classroom at the end of lesson. (psychomotor).
Specific Learning Objectives:
The students:
1. Define kind of counter. (Cognitive / Reorganization )
2. Explain the Asynchronous and synchronous counters . ( Cognitive).
3. List of several type of counters.( Cognitive).
4. Draw the output of Asynchronous and synchronous counters .( psychomotor).
5. Detect internal construction of counter. ( Cognitive / Reorganization )

5. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
3.3:Intended Process:
Opening / Entrance / Motivation
Methodology
Media
Time
MinutesExpected Trainer-action Expected Trainee-action
Introduction.
-Teacher showthem a
small video
-Teacher checks from
students the pre
knowledge about the
subject. .
- Students listen to teacher.
-Students watch the video
-Students try to remember about subject.
Inductive
Approach
Classroom
Conversation
Lecture
Whiteboard
Projector
slide (1/2)
5
Body (Information / Elaboration)
Methodology
Media
Time
MinutesExpected Trainer-action Expected Trainee-action
- Teacher explains types
of counters.
- Teacher Show them the
form of counters.
-Students take notes and focus the with teacher
raisethem hands if they have questions.
Lecture
Whiteboard
slide (3)
5
- Teacher describes
rippleand parallel
counters.
-Teacher shows students
the timing diagram.
-Students Listen – take some notes about
important points .
Classroom
Conversation
Lecture
whiteboard 7
-Teacher describes
ripplecounters with MOD
number <2n.
-Teacher gives exercise
and choose student to
answer it. And give them
the final answer .
- Students shows the timing diagram.
-Studentswrite notes and focus with teacher.
-Students try solvethe question.
Classroom
Conversation
Lecture
Individual work
projector
slides
(4/5 )
Whiteboard
7

6. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
-Teacher gives the
student Handouts .
-Teacher distributes
Handouts .
-Teacher gives the correct
answer.
-Studentstryto getthe solution.
-Studentstake notes.
Lecture
Handout 1
Group work
projector
slide
( 6 ).
7
-Teacher explain to
students the time delay.
-Teacher gives to
students example about
it and choose student to
continue the answer.
-Teacher shows the
correct answer.
-Studentsfocuswithteacherandtake notes .
-StudentsCalculate andgetthe solution.
-Studentstryto get the solution.
-Studentstake notes.
Lecture
Handout 2
Classroom
Conversation
Individual work
projector
slide
( 7 ).
6
-Teacher distributes
practical sheetHandouts.
- Teacher starts the
experiment with
students.
-Studentsmake the experimentwithteacher.
Partner work
Classroom
Conversation
projector
slide
(8)
Handout3
10
Close (Reflection, Exercises, Homework, Feedback)
Methodology
Media
Time
MinutesExpected Trainer-action Expected Trainee-action
-The teacher gives the
students a lesson summary.
-Students take notes.
Classroom
Conversation
projector
slide
(9 )
3

7. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
4:The principle in this lesson focusedon…
 the classroom conversation to make the students more active.
 the individual work to measure the knowledge of the students, and to analysis if
my method success the lesson or not.
 the partner work is for the students to support each other and let them find out
the right answer according to what they understand.
 he lecture is a short to explain what needs to explain.
4.1 :list of attached teaching material : We will to use :
1. Projector.
2. Whiteboard.
3. Pen for whiteboard.(different colors)
4. Task sheet.
5. Practical board.
6. Wires.
5: References:
 RCT curriculum

8. TTC-Riyadh / Vocational Pedagogy / EL-7 / Lesson Plan / counters up 2014
1
Table of content
1. Learning Condition:……………………………………………………………………………………………………….….…………2
1.1. Trainees: :………………………………………………………………………………………………………………………………………….……2
1.2. Classroom:........................... :………………………………………………………………:……………………………………………2
1.3: College:............................................................................................................................... 3
2. Didactic Reflection: ....................................................................................................3
2.1: curriculum analysis:............................................................................................................. 3
2.2. content analysis:.................................................................................................................. 3
2.3. Didactic analysis:.................................................................................................................. 4
2.4. Methodology analysis:......................................................................................................... 4
3:Lesson Plan::................................................................................................................... 5
3.1:General Information:…………………………………………………………………………………………………………....….……5
3.2:Objectives:………………………………………………………………….……………………………………………………………………….……5
3.3:Intended Process:…………………...……………………………………………………………………………………………..………….………….6
3.3:Intended Process:…………………...……………………………………………………………………………………………..………….………….7
4:The principle in this lesson focusedon ……………………………….…………………………..8
4.1 :listof attached teaching material : We will to use…………………………,………………………………………………….………….8
5: References:………………………………….……………………………………..………………………………...8