Để xem full tài liệu Xin vui long liên hệ page để được hỗ trợ
: https://www.facebook.com/thuvienluanvan01
HOẶC
https://www.facebook.com/garmentspace/
https://www.facebook.com/thuvienluanvan01
https://www.facebook.com/thuvienluanvan01
tai lieu tong hop, thu vien luan van, luan van tong hop, do an chuyen nganh
Để xem full tài liệu Xin vui long liên hệ page để được hỗ trợ
: https://www.facebook.com/thuvienluanvan01
HOẶC
https://www.facebook.com/garmentspace/
https://www.facebook.com/thuvienluanvan01
https://www.facebook.com/thuvienluanvan01
tai lieu tong hop, thu vien luan van, luan van tong hop, do an chuyen nganh
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Đề tài đổi mới công nghệ điện phân sản xuất xút Clo, HAY. Chia sẻ Đề tài cho các bạn sinh viên tài liệu tốt nghiệp ngành quản trị kinh doanh các bạn làm chuyên đề tốt nghiệp quản trị kinh doanh vào tải nhé.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận án tiến sĩ ngành kỹ thuật cơ khí với đề tài: Nghiên cứu nâng cao hiệu quả nghiền bột giấy khi dùng máy nghiền dạng đĩa trong ngành công nghiệp giấy, cho các bạn làm luận án tham khảo
Tính toán thiết kế hệ thống xử lý nước thải nhà máy chế biến mủ cao su suối k...TÀI LIỆU NGÀNH MAY
This document presents a graduation thesis project on calculating and designing a wastewater treatment system for the Suoi Ke Rubber Processing Factory Phase 2 with a capacity of 1000m3/day and night.
It begins with an introduction that outlines the purpose, content, and methods for the project. It then provides an overview of the rubber industry and the Suoi Ke Rubber Factory's operations, including its production processes and wastewater characteristics.
The document examines various wastewater treatment technologies and proposes two treatment system designs. It includes calculations for sizing each unit in the systems, as well as cost analyses for both proposed designs. Finally, it discusses operation and management of the treatment system.
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Đề tài nghiên cứu tận dụng phế phẩm nông nghiệp, HAY, Chia sẻ cho các bạn sinh viên tài liệu tốt nghiệp ngành công nghệ môi trường các bạn làm chuyên đề tốt nghiệp công nghệ môi trường vào tải nhé.
This document provides instructions for analyzing particle images using ImageJ software. It discusses downloading and running ImageJ, processing images through thresholding, erosion, and dilation, analyzing particles to obtain size data and distribution statistics, and setting the measurement scale. The summary also acknowledges the students who provided feedback on the homework instructions.
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Đề tài đổi mới công nghệ điện phân sản xuất xút Clo, HAY. Chia sẻ Đề tài cho các bạn sinh viên tài liệu tốt nghiệp ngành quản trị kinh doanh các bạn làm chuyên đề tốt nghiệp quản trị kinh doanh vào tải nhé.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận án tiến sĩ ngành kỹ thuật cơ khí với đề tài: Nghiên cứu nâng cao hiệu quả nghiền bột giấy khi dùng máy nghiền dạng đĩa trong ngành công nghiệp giấy, cho các bạn làm luận án tham khảo
Tính toán thiết kế hệ thống xử lý nước thải nhà máy chế biến mủ cao su suối k...TÀI LIỆU NGÀNH MAY
This document presents a graduation thesis project on calculating and designing a wastewater treatment system for the Suoi Ke Rubber Processing Factory Phase 2 with a capacity of 1000m3/day and night.
It begins with an introduction that outlines the purpose, content, and methods for the project. It then provides an overview of the rubber industry and the Suoi Ke Rubber Factory's operations, including its production processes and wastewater characteristics.
The document examines various wastewater treatment technologies and proposes two treatment system designs. It includes calculations for sizing each unit in the systems, as well as cost analyses for both proposed designs. Finally, it discusses operation and management of the treatment system.
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Đề tài nghiên cứu tận dụng phế phẩm nông nghiệp, HAY, Chia sẻ cho các bạn sinh viên tài liệu tốt nghiệp ngành công nghệ môi trường các bạn làm chuyên đề tốt nghiệp công nghệ môi trường vào tải nhé.
This document provides instructions for analyzing particle images using ImageJ software. It discusses downloading and running ImageJ, processing images through thresholding, erosion, and dilation, analyzing particles to obtain size data and distribution statistics, and setting the measurement scale. The summary also acknowledges the students who provided feedback on the homework instructions.
- The document is an interview with Robert Swinston about his experience dancing for Merce Cunningham and reconstructing Cunningham's choreographies.
- Swinston discusses his background in Martha Graham and Jose Limon's more narrative styles of dance before joining Cunningham, whose work was more abstract. This required Swinston to learn to make the movement speak for itself without relying on music or narrative.
- When reconstructing Cunningham's works, Swinston researches early versions and tries to understand the creative evolution, then balances reconstructing the roots with incorporating changes Cunningham made over time. This process helps Swinston gain a deeper understanding of the inner structures of Cunningham's works.
Este documento descreve os serviços de mobilidade corporativa fornecidos pela Navita, incluindo distribuição de dispositivos BlackBerry, gerenciamento de infraestrutura móvel, suporte técnico e treinamento para clientes corporativos. A Navita oferece soluções para aprovação de compras e propostas, relatórios gerenciais e mobilização de processos de ERP, CRM e intranet no BlackBerry.
Virtual Worlds - Presentation to Ontario University TechnologistsKen Hudson
This document discusses the use of virtual worlds like Second Life in education. It notes that modern multi-user virtual environments (MUVEs) allow simultaneous interaction of dozens of users in a persistent 3D virtual world accessed online. The document outlines how higher education began adopting virtual worlds in 2006-2007 and that by 2011, 80% of internet users will have virtual experiences. It provides examples of how universities like Harvard Law, Loyalist College, and Indiana University's Kelley School of Business use virtual worlds for immersive learning, conferences, research, and marketing. Studies found virtual world border simulations at Loyalist College improved student performance by 28% compared to traditional role plays. The document recommends how educators can plan to incorporate virtual worlds into
The Hanging Temple is a Buddhist temple located in Shanxi Province, China, built into a cliff above Jinlong Canyon near Mount Heng. The temple buildings are constructed along the cliff face using natural indentations and outcroppings, connected by corridors, bridges, and walkways. Built over 1400 years ago, the temple is unique for its cliffside location and inclusion of Buddhist, Taoist, and Confucian elements. It has survived over 1400 years due to rebuilding and maintenance during the Ming and Qing dynasties.
The document summarizes the design changes and improvements to the Chevrolet Corvair between the 1960-1964 and 1965-1969 model years. Key changes included a redesigned exterior styling in 1965 that improved its appearance, the addition of a 180-horsepower turbocharged engine option, and an upgrade to fully independent rear suspension compared to the previous swing-axle design.
This document summarizes and critiques a scientific journal article on biological determinism and homosexuality. It discusses how claims of biological bases for differences in gender and sexuality have historically been used to justify social hierarchies. The document then analyzes a specific study on differences in the corpus callosum between men and women, arguing it was based on a small sample size and its findings were contradicted by later studies with better methodologies. Finally, it closely examines and critiques a study on brain differences between heterosexual and homosexual men, identifying flaws in its premises, sample size, and conclusions.
The document summarizes a review of migrating the state of Utah's file and print services from Netware to Open Enterprise Server (OES). It finds that migrating 367 Netware servers to OES could reduce costs through server consolidation and redirecting personnel. It recommends designating teams to plan an OES migration and test the process with some agencies, documenting results to inform other agencies. The best option is to migrate all Netware servers to OES to reduce costs and complexity over time.
Literature and tacit knowledge of emotionsTeresa Levy
This document discusses how literature can disclose tacit knowledge of emotions. It argues that at least some important emotions cannot be fully understood outside of behavioral contexts and are mainly tacit. The document examines different types of tacit knowledge, including "knowledge by familiarity" and "know-what." It claims that literature can disclose tacit emotional knowledge through devices like metaphors and distance from one's own emotions. Examples from literature are said to help articulate this kind of knowledge in a way that is similar to "hinting" at the tacit knowledge.
The document summarizes the key components and functions of the digestive system. It describes the organs that make up the digestive tract, including the mouth, esophagus, stomach, small intestine, large intestine and rectum. It explains the roles of accessory organs like the liver, gallbladder and pancreas in producing enzymes and bile to aid digestion. It also outlines the processes of digestion and absorption that break down food and allow nutrients to be used by the body.
The document discusses educational opportunities in virtual worlds like Second Life. It summarizes some projects and simulations conducted at Loyalist College, including a blended learning border crossing simulation. Student feedback indicated the simulation felt realistic and allowed them to practice skills in an immersive virtual environment. The document also notes that many young people today are growing up socializing and playing in virtual worlds, showing an opportunity to engage digital natives through virtual education.
Quy trinh san xuat voi cong nghiep cong nghe lo quayHis Group
Công ty CP H.I.S Group
Địa chỉ văn phòng :Phòng 1809, Toà nhà JSC 34, 164 Khuất Duy Tiến, Thanh Xuân, Hà Nội
Địa chỉ nhà máy: Thôn Yên Từ, Xã Mộc Bắc - Huyện Duy Tiên - Hà Nam
Hotline: 0989.382.888 -0926.73.6886
Email: Info.hisgroup@gmail.com
Website: hisgroup.vn
Nhận viết luận văn đại học, thạc sĩ trọn gói, chất lượng, LH ZALO=>0909232620
Tham khảo dịch vụ, bảng giá tại: https://vietbaitotnghiep.com/dich-vu-viet-thue-luan-van
Download luận án tóm tắt ngành kĩ thuật môi trường với đề tài: Nghiên cứu làm sạch khí CO2 bằng khí thải đốt than bằng kĩ thuật xúc tác hấp phụ để làm nguông cacbon nuôi vi khuẩn lam giàu dinh dưỡng
The lost foam casting process involves (1) molding foam patterns that are aged, assembled, and clustered together. (2) The cluster is then coated and dried before (3) being compacted in a flask filled with sand. Molten metal is then poured, displacing the foam to create a casting, which is later extracted from the sand mold.
There are several methods for preparing transmission electron microscopy (TEM) specimens, depending on the material type and desired analysis. Common powder specimen preparation involves dispersing the powder in a solution and depositing it on a TEM grid. For plan-view specimens of solid materials, common methods are cutting disks and thinning them through mechanical polishing, electro-polishing, or ion milling. Cross-section specimens are typically made by cutting and gluing two slices of material together and thinning the "sandwich" through similar methods. Focused ion beam preparation can provide site-specific cross-sections with high resolution for individual devices. Contamination should be minimized during specimen preparation, mounting and analysis to avoid incorrect interpretations.
The document provides an overview of a C programming course, including:
1) The course will teach programming C elegantly and writing good algorithms, without fancy graphics.
2) Programming is useful for applying math concepts to the real world through simulation.
3) C was chosen as it is small, common, stable, and quick-running, forming the basis for many languages.
4) The document defines some programming terminology and covers basic C programming concepts like variables, functions, and debugging techniques.
This document summarizes common C programming concepts including data types, arrays, functions, conditionals, loops, and the main function. It discusses declaring variables of basic data types like int, float, and double. It also covers one-dimensional and two-dimensional arrays, defining functions with different return types, and using if/else, switch, for, while loops for control flow. The main() function is described as the required entry point for all C programs.
The document discusses nanotechnology and provides definitions and examples of nanotechnology applications. It begins by defining nanotechnology as the manipulation of matter at the nanoscale, typically 1 to 100 nanometers. It then provides examples of current nanotechnology products in various industries like electronics, materials, sports, and clothing that are lighter, stronger, and more functional than traditional materials. These applications demonstrate how nanotechnology is already impacting many areas of society.
Nanoindentation is a technique used to determine material properties such as hardness and elastic modulus at small length scales. It works by pressing an indenter with a very small tip into the material and measuring the resulting load and displacement. Factors like thermal drift, machine compliance, and real tip geometry must be accounted for when analyzing the load-displacement data to determine properties. Commercial nanoindentation machines use various methods like capacitive sensing or optical lever systems to precisely measure displacement during indentation testing.
1. Nanoindentation was used to characterize the mechanical properties of various nanostructures such as carbon nanotubes, silver nanowires, and zinc oxide nanobelts.
2. Pressure-induced phase transformations were observed in materials like silicon and germanium during nanoindentation. Pop-in and pop-out events indicated phase changes.
3. Nanoindentation helped determine the mechanical properties of thin films, MEMS structures, and the effects of residual stress. It was also used to study superlattices.
The document introduces various steels and the steelmaking process. It discusses how pig iron is produced in a blast furnace and its composition. Steel is an iron alloy with up to 1.5% carbon and other elements that gives a wide range of strengths. The steelmaking process oxidizes carbon in pig iron and modern processes use oxygen. Ladle metallurgy is used to further refine steel. Steel can be cast, rolled, or delivered in other forms for different applications.
The document discusses the California Air Resources Board's (CARB) use of open source software. It describes how CARB has found open source to be reliable, secure, and cost-effective. It provides examples of how CARB has implemented open source solutions like Linux, Apache, and PHP that have resulted in significant cost savings compared to proprietary alternatives. It also notes trends in growing adoption of open source software by organizations and businesses.
Open source licensing is determined by the licence approved by the Open Source Initiative. Approved licences meet the Open Source Definition and include popular licences like GPL, LGPL, MPL and BSD. Intellectual property rights specify who owns software property through agreements and contracts. All software projects must keep detailed records of licensing and ownership of contributions in an IPR registry to properly manage copyrights and the effects of open source licensing.
The document discusses open source software licenses. It defines open source and compares it to public domain and freeware licenses. The main open source licenses discussed are the GNU General Public License (GPL) and Berkeley Software Distribution (BSD) license. The GPL requires derivatives to also use the GPL while the BSD allows derivatives to use other licenses. Pros of open source development cited include peer review, motivated community contributions, and avoidance of vendor lock-in. Potential cons include projects becoming niche or fragmented.
This document summarizes legal and other issues related to the use of open source software. It defines key terms like proprietary software, open source software, and freeware. It discusses and compares licensing terms for proprietary vs open source software. It notes advantages and disadvantages of each for issues like cost, modifications, standards, and support. It provides guidance on sharing and procuring software following best value practices in Massachusetts.
The document provides an overview of the course requirements and topics to be covered for a Manufacturing Automation course. It discusses the lectures, exams, labs, projects, and research paper requirements. It then covers various topics related to manufacturing automation including types of manufacturing processes, elements of automation systems, history and philosophies of automation, robotics, CAD/CAM integration, and challenges in the field.
The document discusses nuclear power and nuclear reactors. It provides information on the types of nuclear reactors used worldwide including pressurized water reactors (PWR), boiling water reactors (BWR), and pressurized heavy water reactors (PHWR). It also discusses nuclear power plants in various countries like the US, France, Japan, South Korea, and provides statistics on nuclear power reactors operating and under construction worldwide.
The document discusses solar thermal energy technologies. It describes how solar thermal technologies use the sun's heat energy to heat substances like water or air for applications such as space heating and water heating. It provides details on different solar thermal collector technologies, including flat-plate collectors that are mounted on roofs and concentrate sunlight to heat a fluid. Concentrating solar power systems are also discussed, which use mirrors to focus sunlight and produce steam to generate electricity. Solar thermal power generation is highlighted as a promising renewable energy technology due to its low costs and ability to provide firm, reliable power production with thermal storage or fossil fuel backup.
The document provides an overview of the history and development of wind energy, including key events from ancient times to modern utility-scale wind farms. It discusses the advantages of wind power such as being renewable and producing no pollution, and covers wind turbine design technology, siting considerations, and challenges including intermittent output and impacts on birds. The economics of wind farm design and costs are also addressed.
The document discusses several large hydroelectric power plants around the world. It provides details on three major hydroelectric plants:
1) The Itaipu Dam on the Brazil/Paraguay border which has an annual production of over 90 billion kWh and is one of the largest hydroelectric plants in the world.
2) The Three Gorges Dam in China which is the largest hydroelectric dam ever built and has an installed capacity of over 22 GW.
3) The Grand Coulee Dam in the US which has an installed capacity of over 6.8 GW and is the largest power producing facility in the country.
Tuyển tập 9 chuyên đề bồi dưỡng Toán lớp 5 cơ bản và nâng cao ôn thi vào lớp ...Bồi Dưỡng HSG Toán Lớp 3
Tuyển tập 9 chuyên đề bồi dưỡng Toán lớp 5 cơ bản và nâng cao ôn thi vào lớp 6 trường chuyên. Đăng ký mua tài liệu Toán 5 vui lòng liên hệ: 0948.228.325 (Zalo - Cô Trang Toán IQ).
Hành vi tình dục không an toàn và các yếu tố liên quan trong nhóm nam quan hệ...Man_Ebook
Hành vi tình dục không an toàn và các yếu tố liên quan trong nhóm nam quan hệ tình dục đồng giới tại Hà Nội năm 2009-2010
Liên hệ tài tài liệu (Free): https://www.facebook.com/man.trl/
47. Mô tả công nghệ Midrex Công nghệ gồm 4 bộ phận: khí hoàn nguyên, chuyển hóa khí, thu hồi nhiệt thải và đóng bánh nóng. Quặng sắt yêu cầu %Fe ≥ 66%. Có thể sử dụng 100% quặng vê viên hoặc 100% quặng cục hoặc kết hợp của chúng. Ngoài ra có thể bổ sung đến 10% lượng quặng sắt mịn. (1), (2): quá trình hoàn nguyên gián tiếp (3), (4): Các bua hóa (5), (6): Các phản ứng chuyển hóa khí, Ni thường được sử dụng làm chất xúc tác phản ứng
56. Năm 1967, hai chương trình nghiên cứu để giảm tiêu hao năng lượng và tăng năng suất nhà máy:
57. Dự án thứ nhất: cải thiện hiệu năng và tối ưu quá trình Hyl I, Hyl II ra đời năm 1979.
58. Dự án thứ 2: Phát triển công nghệ phản ứng dựa trên lò phản ứng lớp sôi di động (moving bed reactor). Sản phẩm dự án là công nghệ Hyl III. (năm 1980)
83. Lưu trình công nghệ Hyl III Reformer: Buồngchuyểnhóakhí Reactor: Lòđứng – buồnghoànnguyên Natural gas (NG): Khíthiênnhiên Gas heater: Buồngnungkhí Fuel: Nhiênliệu
87. Lưu trình công nghệ Hyl-ZR (Hyl IV M) Công nghệ Hyl-ZR sử dụng quá trình tự chuyển hóa khí: Khí thiên nhiên (NG) được phun vào cùng với khí tái chế thu hồi được đi vào buồng tạo ẩm, hỗn hợp khí sau đó dược nung nóng đến trên 900°C. Trong khi chuyển khí đến buồng phản ứng hoàn nguyên, Oxy được phun vào và cháy 1 phần làm tăng nhiệt độ khí đến 1020°C. Khí nhiên liệu từ đáy lò đi đến vùng hoàn nguyên, và di chuyển ngược dòng với liệu rắn từ trên xuống. Ở phần dưới vùng hoàn nguyên, xảy ra phản ứng chuyển hóa khí tự sinh (in-situ), khi khí nóng tiếp xúc với sắt xốp kim loại (được xem là chất xúc tác). Dẫn đến, một phần sắt xốp phản ứng với C, và tạo Cacbit Fe3C, và để lại 1 phần C dư.
88.
89. Có thể diều khiển mức độ kim loại hóa và hàm lượng C độc lập bằng cách điều chỉnh tham số công nghệ và thành phần khí.
90. Cả khí hoàn nguyên và phản ứng chuyển hóa khí xảy ra ngay trong buồng phản ứng.
93. Lưu trình và giới hạn khu vực Ultilities: Khu vực tiện ích. Meltshop: Xưởng luyện thép. Stock yard: Bãi/kho liệu. DR Plant Boundary: Biên giới xưởng luyện DRI.
104. Tổ hợp Hyl-ZR Micro-module Bảng thông số cơ bản Ghi chú: Product: sản phẩm Cold DRI: sắt xốp nguội Metallization: mức độ kim loại hóa. Sản lượng 26 Tấn/giờ200.000 Tấn/năm Số giờ hoạt động: 7800h/năm Hàm lượng C có thể điều chỉnh từ 2-5%.
106. Tiêu thụ nguyên/nhiên liệu Hyl-ZR Với chất lượng sắt xốp nêu trên, tại Cty Krakatau Steel (Indonesia) đã sản xuất được thép chất lượng cao như thép lá cán nguội dập sâu, thép bền ăn mòn khí quyển…
107. Sắt xốp C cao – Hyl ZR Sắtxốpcóhàmlượng 4% C sẽchứatrên 50% Fe3C. Hàmlượng Fe3C caotrongsắtxốplàmchosắtxốpbềnhơn. Hầuhết C trongsắtxốp ở dạng Fe3C, với 4% C sẽcókhoảng 95% C ở dạng Fe3C. Cứ 1% C ở dạnghợpchấthóahọcsẽtươngứngvới 13.5% Fe3C.
![Côngnghệ FINMET Đặc điểm kỹ thuật Thông số ,[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)