1) Temperature is measured using various instruments like liquid-in-glass thermometers, bimetallic thermometers, resistance temperature detectors (RTDs), pyrometers, and radiation pyrometers.
2) Liquid-in-glass thermometers use the expansion of liquid mercury in a glass tube to measure temperature, while bimetallic thermometers use the differential expansion of two bonded metals.
3) RTDs measure temperature by detecting changes in electrical resistance, with platinum being a commonly used sensing element.
Discussing what is temperature. How to calibrate a thermometer. Liquid in glass thermometers. Calibrate a liquid-in-glass thermometer using two fixed points. Characteristics of a quality/ good thermometer.
Fluke offers the latest in non-contact infrared (IR) thermometers (sometimes known as infrared pyrometers) and contact thermometers, probes, accessories, and application expertise for a complete range of temperature applications. Fluke backs all of its handheld thermometers with a no-hassle 2-year warranty and the highest level of customer service.
Discussing what is temperature. How to calibrate a thermometer. Liquid in glass thermometers. Calibrate a liquid-in-glass thermometer using two fixed points. Characteristics of a quality/ good thermometer.
Fluke offers the latest in non-contact infrared (IR) thermometers (sometimes known as infrared pyrometers) and contact thermometers, probes, accessories, and application expertise for a complete range of temperature applications. Fluke backs all of its handheld thermometers with a no-hassle 2-year warranty and the highest level of customer service.
Explains the principles underlying all devices used to sense temperature, and how the sensor signals are processed to convert them to indications of temperature. Describes the fundamental concepts of temperature, the Thermodynamic Temperature Scale, and the International Practical Temperature Scale. Covers sensor choice, response characteristics, heat transfer conditions, installation errors, instrumentation compromises, and mechanisms of sensor deterioration.
Gives a brief introduction about temperature measurement and its unit. it also enumerates the different techniques employed in temperature measurement.
Sorces of errors in a filled system thermometerTejas Atyam
another ppt for a class presentation . I admit it is a bit incomplete but this is all I got as a topic for explanation . I hope you guys gain from it !
In this presentation we have discussed about temperature measuring instruments used in industry. Like Mechanical , electrical and non contact types instruments for measuring temperature
Explains the principles underlying all devices used to sense temperature, and how the sensor signals are processed to convert them to indications of temperature. Describes the fundamental concepts of temperature, the Thermodynamic Temperature Scale, and the International Practical Temperature Scale. Covers sensor choice, response characteristics, heat transfer conditions, installation errors, instrumentation compromises, and mechanisms of sensor deterioration.
Gives a brief introduction about temperature measurement and its unit. it also enumerates the different techniques employed in temperature measurement.
Sorces of errors in a filled system thermometerTejas Atyam
another ppt for a class presentation . I admit it is a bit incomplete but this is all I got as a topic for explanation . I hope you guys gain from it !
In this presentation we have discussed about temperature measuring instruments used in industry. Like Mechanical , electrical and non contact types instruments for measuring temperature
various types of temperature measuring instrument
1.expansion types
i)bimetallic strips
ii)liquid in gas
2.based on electric resistivity
i)thermocouple
ii)thermistors(most sensitivity)
3.pyrometers
i)mirror types
ii)optical
iii)photon types(not exact names:-based on collection of photon)
and one interesting term include in pyrometers is THERMOPILE:A large number of themocouple connected in series.Hopes so you all will enjoy
Temperature measurments and its used devices. i.e, divided into three catageory mevhanical,electrical and wireless devices used for temperature devices.
Resistance Temperature Detector
WHAT IS RTD ?
WHY IS RTD USED?
Typical Design
RTD PROBE
Common Resistance materials for RTD
Advantages of RTD
Application OF RTD
Question and Answers
Usage of Platinum
2. Introduction
The accurate measurement of temperature is vital across
abroad spectrum of human activities,
Including industrial processes (e.g. making steel)
Manufacturing;
Monitoring (in food transport and storage),
Health and safety.
In fact, in almost every sector, temperature is one of the
key parameters to be measured
3. Scale
Temperature is a measure of the thermal energy in the body.
Normally measured in degrees [°]using one of the
following scales.
1. Fahrenheit.[°F]
2. Celsius or centigrade. [°C]
3. Kelvin .[°K]
4.
5. 1.Bulb: The reservoir for containing most of the
thermometric liquid (mercury).
2.Stem: The glass tube having a capillary bore
along which the liquid moves with
changes in temperature.
3. Scale: A narrow-temperature-range scale for
reading a reference temperature .
Construction
1.Liquid – in – Glass Thermometer
6. • The volume of mercury changes slightly with
temperature; the small change in volume drives the
narrow mercury column a relatively long way up the
tube.
• The space above the mercury may be filled
with nitrogen or it may be at less than atmospheric
pressure, a partial vacuum.
7. Advantages
1) Simplicity in use & low cost.
2) Portable device.
3) Checking physical damage is easy.
4) Power source not require.
Disadvantages
1) Can not used for automatic recording.
2) Time lag in measurement.
3) Range is limited to about 300 °C .
8. 2.Bimetallic Thermometer
Two basic principles of operation is to be followed in
the case of a bimetallic sensor.
1) A metal tends to undergo a volumetric dimensional
change (expansion/contraction), according to the
change in temperature.
2) Different metals have different co-efficient of
temperatures. The rate of volumetric change depends
on this co-efficient of temperature.
10. • The device consists of a bimetallic strip of two different metals
.
• They are bonded together to form a spiral or a twisted helix.
• Both these metals are joined together at one end by either
welding or riveting.
• It is bonded so strong that there will not be any relative
motion between the two.
• The image of a bimetallic strip is shown below.
11. A change in temperature causes the free end of the
strip to expand or contract due to the different
coefficients of expansion of the two metals.
This movement is linear to the change in temperature
and the deflection of the free end can be read out by
attaching a pointer to it.
This reading will indicate the value of temperature.
Bimetallic strips are available in different forms like
helix type, cantilever, spiral, and also flat type.
Construction
12. Advantages
1)Power source not required
2)Robust, easy to use and cheap.
3)Can be used to 500 °C.
Disadvantages
1) Not very accurate.
2) Limited to applications where manual reading is
acceptable.
3) Not suitable for very low temperatures because
the expansion of metals tend to be too similar, so
the device becomes a rather insensitive
thermometer
15. Resistance Temperature Detector (RTD)
RTD can also be called a resistance thermometer as
the temperature measurement will be a measure of the
output resistance.
The main principle of operation of an RTD is that when
the temperature of an object increases or decreases, the
resistance also increases or decreases proportionally.
ie. positive temperature coefficient
16. RTD Types
RTD types are broadly classified according to the
different sensing elements used.
Platinum, Nickel and Copper are the most commonly
used sensing elements.
18. Resistance Temperature Detector (RTD)
Copper lead wires are satisfactory for
all the arrangements.
For a given RTD, all the lead-wires
should be of the same
gauge and the same length,
and should be run in the same conduit.
Resistance Temperature Detector-(RTD)-2 Wire
19. • Advantages
1. Very high accuracy
2. Excellent stability and reproducibility
3. Interchangeability
4. Ability to be matched to close tolerances for
temperature difference measurements.
5. Ability to measure narrow spans
6. Suitability for remote measurement
20. • Disadvantages
1. Susceptibility to mechanical damage
2. Need for lead wire resistance compensation
3. Sometimes expensive
4. Susceptibility to self-heating error
5. Susceptibility to signal noise
6. Unsuitability for bare use in electrically
conducting substance
7. Generally not repairable
8. Need for power supply
21. Pyrometer
• A pyrometer is a device that is used for the temperature
measurement of an object.
• The device actually tracks and measures the amount of
heat that is radiated from an object.
• The thermal heat radiates from the object to the optical
system present inside the pyrometer.
• The optical system makes the thermal radiation into a
better focus and passes it to the detector.
22.
23. As shown in the figure above, an optical pyrometer has
the following components.
1. An eye piece at the left side and an optical lens on the
right.
2. A reference lamp, which is powered with the help of a
battery.
3. A rheostat to change the current and hence the
brightness intensity.
4. So as to increase the temperature range which is to be
measured, an absorption screen is fitted between the
optical lens and the reference bulb.
24. Working
1.The radiation from the source is emitted and the
optical objective lens captures it.
2.The lens helps in focusing the thermal radiation on to the
reference bulb.
3.The observer watches the process through the eye piece
and corrects it in such a manner that the reference lamp
filament has a sharp focus and the filament is super-imposed
on the temperature source image.
4.The observer starts changing the rheostat values and the
current in the reference lamp changes.
5.This in turn, changes its intensity.
This change in current can be observed in three different ways.
25. The filament is dark. That is, cooler than the
temperature source.
Filament is bright. That is, hotter than the
temperature source.
Filament disappears. Thus, there is equal
brightness between the filament and temperature
source
26. • Advantages
1. Provides a very high accuracy with +/-5º Celsius.
2. The biggest advantage of this device is that, there is no
direct contact between the pyrometer and the object
whose temperature is to be found out.
• Disadvantages
1. As the measurement is based on the light intensity, the
device can be used only in applications with a minimum
temperature of 700º Celsius.
2. The device is not useful for obtaining continuous values
of temperatures at small intervals.
28. • the radiation pyrometer has an optical system, including a
lens, a mirror and an adjustable eye piece. The heat energy
emitted from the hot body is passed on to the optical lens,
which collects it and is focused on to the detector with the
help of the mirror and eye piece arrangement. The detector
may either be a thermistor or photomultiplier tubes. Though
the latter is known for faster detection of fast moving objects,
the former may be used for small scale applications. Thus, the
heat energy is converted to its corresponding electrical signal
by the detector and is sent to the output temperature display
device.