Supercapacitors (Ultracapacitor) : Energy Problem Solver,Amit Soni
Capacitor, Basic design and terminology, Supercapacitor, History of Supercapacitor
Classification of Supercapacitors, Electrical Double layer capacitors,Pseudocapacitor
Hybrid Capacitor, Basic Design, Construction, Working , Technology used, Why these substances used ?, Features, Comparison, Applications , Advantages & Disadvantages
state of art materials, comparison with batteries, fuel cells, applications
This presentation outlines the different storage technology options available to cope up with the intermittent nature of the Renewable energy like wind and solar.
Supercapacitors and Battery power management for Hybrid Vehicle Applications ...Pradeep Avanigadda
This paper presents supercapacitors and battery association methodology for ECCE Hybrid
vehicle. ECCE is an experimental Hybrid Vehicle developed at L2ES Laboratory in collaboration with
the Research Center in Electrical Engineering and Electronics in Belfort (CREEBEL) and other French
partners. This test bench has currently lead-acid batteries with a rated voltage of 540 V, two motors
each one coupled with one alternator. The alternators are feeding a DC-bus by rectifers. The main
objective of this paper is to study the management of the energy provides by two supercapacitor
packs. Each supercapacitors module is made of 108 cells with a maximum voltage of 270V. This
experimental test bench is carried out for studies and innovating tests for the Hybrid Vehicle
applications. The multi boost and multi full bridge converter topologies are studied to define the best
topology for the embarked power management. The authors propose a good power management
strategy by using the multi boost and the multi full bridge converter topologies. The experimental and
simulation results of the two converter topologies are presented.
Supercapacitors (Ultracapacitor) : Energy Problem Solver,Amit Soni
Capacitor, Basic design and terminology, Supercapacitor, History of Supercapacitor
Classification of Supercapacitors, Electrical Double layer capacitors,Pseudocapacitor
Hybrid Capacitor, Basic Design, Construction, Working , Technology used, Why these substances used ?, Features, Comparison, Applications , Advantages & Disadvantages
state of art materials, comparison with batteries, fuel cells, applications
This presentation outlines the different storage technology options available to cope up with the intermittent nature of the Renewable energy like wind and solar.
Supercapacitors and Battery power management for Hybrid Vehicle Applications ...Pradeep Avanigadda
This paper presents supercapacitors and battery association methodology for ECCE Hybrid
vehicle. ECCE is an experimental Hybrid Vehicle developed at L2ES Laboratory in collaboration with
the Research Center in Electrical Engineering and Electronics in Belfort (CREEBEL) and other French
partners. This test bench has currently lead-acid batteries with a rated voltage of 540 V, two motors
each one coupled with one alternator. The alternators are feeding a DC-bus by rectifers. The main
objective of this paper is to study the management of the energy provides by two supercapacitor
packs. Each supercapacitors module is made of 108 cells with a maximum voltage of 270V. This
experimental test bench is carried out for studies and innovating tests for the Hybrid Vehicle
applications. The multi boost and multi full bridge converter topologies are studied to define the best
topology for the embarked power management. The authors propose a good power management
strategy by using the multi boost and the multi full bridge converter topologies. The experimental and
simulation results of the two converter topologies are presented.
The transportation industry continues to adopt more supercapacitors into their designs each year. Advantages in power density, cold temperature performance, and lifetime make them suitable for accompanying or replacing a battery bank.
This presentation introduces what a supercapacitor is (it isn't just a big capacitor!), some characteristics to consider, and two applications of ELDCs.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Super Capacitor by NITIN GUPTA
NITIN GUPTA,CEO/FOUNDER/OWNER at "TECH POINT"
Here's Channel Link
PLEASE SUBSCRIBE Our channel TECH POINT ..
FOLLOW US ON TWITTER:https://twitter.com/Nitin_TECHPOINT
Follow us on Facebook:https://www.facebook.com/NitinGupta1054.Official.PSIT
Follow us on Instagram:https://www.instagram.com/nitingupta_official
SUBSCRIBE Our channel:https://www.youtube.com/channel/UCj3XVydYG3oPVJeZscU4NIg?sub_confirmation=1
Energy storage system can actually store energy and use the stored energy whenever the need arises.
As the need for clean energy arises, the need to replace current existing power plants have become a global issue.
NEED OF ENERGY STORAGE
Supply and Demand mismatch
Utilize storage for peak periods.
Reliable power supply.
Reduce the need for new generation capacity.
Electrical vehicles
Emergency support.
Energy storage systems are the set of methods and technologies used to store various forms of energy.
There are many different forms of energy storage
Batteries: a range of electrochemical storage solutions, including advanced chemistry batteries, flow batteries, and capacitors
Mechanical Storage: other innovative technologies to harness kinetic or gravitational energy to store electricity
Compressed Air: utilize compressed air to create energy reserves. Electricity can be converted into hydrogen by electrolysis. The hydrogen can be then stored and eventually re-electrified.
Pumped hydro-power: creates energy reserves by using gravity and the manipulation of water elevation
Thermal: capturing heat or cold to create energy
The choice of energy storage technology is typically dictated by application, economics, integration within the system, and the availability of resources.
A presentation as a part of coursework on Ultracapacitors, the modern electric energy storage devices with very high capacity and a low internal resistance.
Supercapacitors offer a promising alternative approach to meeting the increasing power demands of energy storage systems and electronic devices. With their high power density, ability to perform in extreme temperatures, and millions of charge-recharge cycle capabilities, supercapacitors can increase circuit performance and prolong the life of batteries. This can add value to the end-product and ultimately reduce the costs to the customer by reducing the amount of batteries needed and the frequency of the replacement of the batteries, which adds greatly to the environmental friendliness of the end-product as well.
• Plug-in Hybrid-Electric Vehicles (PHEVs), are hybrids with high capacity batteries that can be charged by plugging them into an electrical outlet or charging station. They can store enough electricity to significantly reduce their petroleum use under typical driving conditions
The transportation industry continues to adopt more supercapacitors into their designs each year. Advantages in power density, cold temperature performance, and lifetime make them suitable for accompanying or replacing a battery bank.
This presentation introduces what a supercapacitor is (it isn't just a big capacitor!), some characteristics to consider, and two applications of ELDCs.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Super Capacitor by NITIN GUPTA
NITIN GUPTA,CEO/FOUNDER/OWNER at "TECH POINT"
Here's Channel Link
PLEASE SUBSCRIBE Our channel TECH POINT ..
FOLLOW US ON TWITTER:https://twitter.com/Nitin_TECHPOINT
Follow us on Facebook:https://www.facebook.com/NitinGupta1054.Official.PSIT
Follow us on Instagram:https://www.instagram.com/nitingupta_official
SUBSCRIBE Our channel:https://www.youtube.com/channel/UCj3XVydYG3oPVJeZscU4NIg?sub_confirmation=1
Energy storage system can actually store energy and use the stored energy whenever the need arises.
As the need for clean energy arises, the need to replace current existing power plants have become a global issue.
NEED OF ENERGY STORAGE
Supply and Demand mismatch
Utilize storage for peak periods.
Reliable power supply.
Reduce the need for new generation capacity.
Electrical vehicles
Emergency support.
Energy storage systems are the set of methods and technologies used to store various forms of energy.
There are many different forms of energy storage
Batteries: a range of electrochemical storage solutions, including advanced chemistry batteries, flow batteries, and capacitors
Mechanical Storage: other innovative technologies to harness kinetic or gravitational energy to store electricity
Compressed Air: utilize compressed air to create energy reserves. Electricity can be converted into hydrogen by electrolysis. The hydrogen can be then stored and eventually re-electrified.
Pumped hydro-power: creates energy reserves by using gravity and the manipulation of water elevation
Thermal: capturing heat or cold to create energy
The choice of energy storage technology is typically dictated by application, economics, integration within the system, and the availability of resources.
A presentation as a part of coursework on Ultracapacitors, the modern electric energy storage devices with very high capacity and a low internal resistance.
Supercapacitors offer a promising alternative approach to meeting the increasing power demands of energy storage systems and electronic devices. With their high power density, ability to perform in extreme temperatures, and millions of charge-recharge cycle capabilities, supercapacitors can increase circuit performance and prolong the life of batteries. This can add value to the end-product and ultimately reduce the costs to the customer by reducing the amount of batteries needed and the frequency of the replacement of the batteries, which adds greatly to the environmental friendliness of the end-product as well.
• Plug-in Hybrid-Electric Vehicles (PHEVs), are hybrids with high capacity batteries that can be charged by plugging them into an electrical outlet or charging station. They can store enough electricity to significantly reduce their petroleum use under typical driving conditions
A supercapacitor or ultra capacitor is an electrochemical capacitor that has an unusually high energy density when compared to common capacitors. They are of particular interest in automotive applications for hybrid vehicles and as supplementary storage for battery electric vehicles.
Usages et Mise en Œuvre de Confluence Wiki - du Réseau Social à l'Intranet Co...Kap IT
Support de présentation utilisé lors de l'atelier « Usages et Mise en Œuvre de Confluence Wiki, du Réseau Social à l'Intranet Collaboratif » réalisé durant le Salon de l'Intranet 2010 (Solutions Intranet et Travail Collaboratif) @ Paris.
Cette rencontre présentait 2 retours d'expérience sur le déploiement du wiki Confluence (édité par Atlassian) en entreprise.
Le premier, à la Société Générale avec le projet « Sharing » : réseau social et plateforme communautaire de la filière RH.
Le second chez RohMax (groupe allemand Evonik) avec le projet « VISCOpedia/EVONIKpedia » : intranet collaboratif du groupe déployé suite à l'adoption virale par plusieurs business units.
Ces retours d'expérience étaient présentés par Ali Oui, Responsable Consulting Web 2.0 chez Kap IT et bénéficiaient des témoignages de Franck La Pinta, Responsable Marketing RH à la Société Générale et de Gilles Scheurer, IT Manager chez RohMax (groupe Evonik).
Plus globalement, cet atelier a permis de faire un tour d'horizon du projet 2.0 en grande entreprise, de ses enjeux, de ses usages, des écueils possibles, de la méthodologie et des bonnes pratiques à adopter pour en assurer son succès.
TechEnvince - Analysis of Implementing the Electric Bus and its Coordnation w...Vivek Gunawat
This work was part of Research Work that we did under the Guidance of Dr. Praveen Kumar, Dept of EEE , IIT Guwahati from Feb'12 - May-2012.
The Paper was then Published in IEEE Indiconn 2012, Kochin, Kerela as Conference Proceedings.
Flash Memory Summit Presentation for NOVACHIPS Co., Ltd.
Presenting smart SSD controller which have flexibility of configuring various kinds of NAND in a single unit. This flexibility can help creating new market segments and better suited solution for different segments
Carport of the Future has Solar EV, Hybrid Wind Charger CapabilitiesJackie_Harmon
The use of electric vehicles is gaining momentum with the public, and companies are responding to this by building carports that charge them. With the inception of Giraffe, the Swedish firm InnoVentum caters to the need for more advanced parking spaces for increasingly urban customers.
EXPERIMENTAL STUDY ON A DOMESTIC REFRIGERATOR USING LPG AS A REFRIGARANTIAEME Publication
This project is devoted to feasibility study of substitution of LPG (60% Propane and 40 % commercial Butane) as refrigerant instead of R134a in a domestic refrigerator. An experimental performance study on a VCR system
with LPG as refrigerant was conducted and compared with R134a.The VCR system was initially designed to operate with R134a.
Descripción de un amplificador de audio de alta fidelidad estereo cuya potencia es de 60+60 Watios. Se indican los componentes utilizados y los planos eléctricos del equipo.
This presentation details current models available for integrating electric vehicles onto the grid, case studies and possible improvements for future models.
Internal combustion engines produce appreciable emissions and are also less efficient at part loads. On other hand electric drives have zero emissions, but also very limited range. It is thus logical to combine the best aspects of both and the result is a hybrid vehicle. Optimum strategy would then be to use electric drive during slow moving city traffic, for acceleration and for hill climbing and IC engines at cruising speeds on highways. This would also results in reduced pollution in cities, along with improved mileage.
The engine on the conventional car is sized for the peak power requirement, which is seldom required in actual practice. The hybrid car uses a much smaller engine, whose size is kept closer to the average power requirement rather than the peak power. A smaller engine is always more efficient due to the reason that it would run at its optimum capacity most of the time as compared to a bigger engine running at part load most of the time.
Electric motor helps in several ways:
1. Provides extra power when the car is accelerating or climbing a hill.
2. Starts the engine, eliminating the need for a separate starter.
3. Provide regenerative braking to capture energy during braking
Cross-Sector Battery Systems Innovation Network: Batteries for RailKTN
Building on the successful launch of the Cross-Sector Battery Systems Innovation Network in late September 2020, this webinar series will look into the opportunities and trends for Batteries in Defence, Maritime and Rail. Each session will bring together experts looking at the supply and demand side for batteries, technical requirements and explore how these wide range of sectors can decarbonise through batteries.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
5. SUNWIN delivered different technology buses at Shanghai Expo. The technologies for these buses of the future were developed by the company in cooperation with the other part-owner in the company, Shanghai Automotive Industry Corporation.
6.
7. Electric Buses Electrical buses are equipped with batteries that can be run for some three hour before they are exchanged to a freshly charged battery pack at one of the end stations.