Charlie Nordstrom presentation to the AWEA WINDPOWER Conference in Baltimore September 2015 outlining the best route to market for floating foundations in offshore wind energy deployments
How Advanced Simulation will Impact the Offshore Industry both Now and in the...Altair
The easy days of Oil and gas extraction is over, and the ability to extract Oil and Gas from harsh enviornments is very dependent on the ability to overcome technical challenges through the use of advanced numerical analysis and simulation. Technical challalenges currently faced in the industry include High Pressure High Temperature (HPHT), Utra Deep Water (UDW) with water depths greater than 10,000 ft, and the Arctic with potentially 20% untapped hydro carbon reserves. These technical challenges are overcome through more use of advanced analysis and simulation, and this allows cost effective solutions to be obtained.
Also the Industry is currently being challenged by a low oil price, and lots of companies are forced to look at cost and schedule. This as a result, allows the opportunity for the use of advanced analysis to help solve Engineering challanges in an efficient manner and save potentially millions of dollars in the Engineering. The ways that this is undertaken is presented and discussed.
There are different types of Analysis simulation used in the Offshore Industry, for example FEA, CFD, Coupled Analysis etc. Also computer power is ever increasing in compuational efficiencies, and novel methods, such as the use of Cloud computing, has had a big impact on the way that analysis is undertaken. These different methods of software and hardware are discussed in relation to the Offshore Industry, and an indication is given in to how these methods will affect the Industry in the future.
Offshore renewables minimising OPEX Bruce Valpy Nantes 21 May 2015BVG Associates
Presentation given by Bruce Valpy, MD of BVGA on how Offshore renewable cost of energy can be minimize OPEX requirements by carrying our the 10 steps to success
Reducing the Cost of Project Change by Peter Timler, West-Cascadia ConsultantsAVEVA Group plc
Peter Timler, West-Cascadia Consultants, explores ‘Reducing the Cost of Project Change’ at the AVEVA World Summit 2016, New Orleans. Peter shares and reviews 3 different Project Cases and demonstrates all projects were only possible due to the model-centric information delivery process that had been conceptualized, researched, tested and developed by AVEVA technology.Find out more how AVEVA can transform your business >> www.aveva.com
The ORE Catapult and Future Opportunities,David Arnold,Technology strategy BoardInvest Northern Ireland
Presentation from the Supply Chain Opportunities in the Onshore and Offshore Wind Operation and Maintenance Sectors held at Down Royal Racecourse, Lisburn 27th November 2013
How Advanced Simulation will Impact the Offshore Industry both Now and in the...Altair
The easy days of Oil and gas extraction is over, and the ability to extract Oil and Gas from harsh enviornments is very dependent on the ability to overcome technical challenges through the use of advanced numerical analysis and simulation. Technical challalenges currently faced in the industry include High Pressure High Temperature (HPHT), Utra Deep Water (UDW) with water depths greater than 10,000 ft, and the Arctic with potentially 20% untapped hydro carbon reserves. These technical challenges are overcome through more use of advanced analysis and simulation, and this allows cost effective solutions to be obtained.
Also the Industry is currently being challenged by a low oil price, and lots of companies are forced to look at cost and schedule. This as a result, allows the opportunity for the use of advanced analysis to help solve Engineering challanges in an efficient manner and save potentially millions of dollars in the Engineering. The ways that this is undertaken is presented and discussed.
There are different types of Analysis simulation used in the Offshore Industry, for example FEA, CFD, Coupled Analysis etc. Also computer power is ever increasing in compuational efficiencies, and novel methods, such as the use of Cloud computing, has had a big impact on the way that analysis is undertaken. These different methods of software and hardware are discussed in relation to the Offshore Industry, and an indication is given in to how these methods will affect the Industry in the future.
Offshore renewables minimising OPEX Bruce Valpy Nantes 21 May 2015BVG Associates
Presentation given by Bruce Valpy, MD of BVGA on how Offshore renewable cost of energy can be minimize OPEX requirements by carrying our the 10 steps to success
Reducing the Cost of Project Change by Peter Timler, West-Cascadia ConsultantsAVEVA Group plc
Peter Timler, West-Cascadia Consultants, explores ‘Reducing the Cost of Project Change’ at the AVEVA World Summit 2016, New Orleans. Peter shares and reviews 3 different Project Cases and demonstrates all projects were only possible due to the model-centric information delivery process that had been conceptualized, researched, tested and developed by AVEVA technology.Find out more how AVEVA can transform your business >> www.aveva.com
The ORE Catapult and Future Opportunities,David Arnold,Technology strategy BoardInvest Northern Ireland
Presentation from the Supply Chain Opportunities in the Onshore and Offshore Wind Operation and Maintenance Sectors held at Down Royal Racecourse, Lisburn 27th November 2013
Adapting Project Productivity to a Different World of Competition by Harry Be...AVEVA Group plc
The oil & gas industry faces long-term price pressures from new competitors and future project portfolios need to be scalable and flexible, avoiding the high risks, costs, and poor productivity of the past. Lessons in efficient manufacturing will need to be learned. Industry expert, Harry Benham, formerly Shell, explains how to put energy projects back on track and discusses the 5 key actions to catalyze reduction in project size and complexity and increase performance.
Find out more how AVEVA can transform your business here >> www.aveva.com
DigitalClone for Engineering Supporting Business Initiatives of Rotorcraft OE...Sentient Science
Sentient Science’s DigitalClone for Engineering Software is used by aircraft OEM, Suppliers and Operators to evaluate new and upgrade designs through materials science-based computational testing. The software is used throughout the design cycle to life critical components within the drivetrain. DigitalClone for Engineering enables certified digital models to be used by aircraft operators for asset management and supply chain planning and demand forecasting by simulating the models under multiple operational profiles.
The economics of reducing the cost of energy by 13% revenuesSentient Science
At what “speed” is your digitalization effort? There is no dispute, digitalization will play a key role in improving the sustainability of renewable energy sources through efficiency. The question remains – Where are you? While the industry has embraced the importance, water cooler conversations continue - How to monetize the true value of the data from digitalization?
The webinar outlines:
• How digitalization is applied across all corporate business units: asset management, operations management, risk management and supply chain management to reduce the cost of energy by up to 13%
• An industry operator case study on monetizing your digitalization efforts and understand the true ROI
• A digitalization value statement to enable operations management can provide a short-term watch list from 0-12 months enabling early detection prior to consequential damage beyond an operator's current capabilities – attributes to 2-3% of cost avoidance or cost savings.
AVEVA Integrated Shipbuilding Solution by Robert Pesut, BrodosplitAVEVA Group plc
Robert Pesut, Brodosplit, presents the ‘Integrated Shipbuilding Solution’ at the AVEVA World Summit 2016, New Orleans. Robert discusses the implementation process of the integrated shipbuilding solution into the shipyard that is under restructuring process. As a result of using AVEVA Marine and ERM solutions the project will see improved design speed, reduced design time and improved production planning. Find out more how AVEVA can transform your business >> www.aveva.com
This is a unique webinar designed specifically for our customers that want to know more about the validation of our model. We put together this slide deck and discussion together to solely review our validations in the wind industry.
How Material Science Helps Operators with End of Warranty InspectionsSentient Science
Learn:
How your fleet is performing and learn how to develop a component watch list over the next 6 months.
Preventative maintenance strategies to extend the life of your fleet beyond 20 years.
The amount of future repairs, components or gearbox exchanges that are needed at the end of your warranty.
An enhanced view of your end of warranty options using material science-based computational testing.
With programs such as U.S. Army Future Vertical Lift (FVL), how can I predict rotorcraft drivetrain life and solve premature failures before they occur?
Behrooz Jalalahmadi, PhD., Lead Scientist for DigitalClone Component, has outlined how prognostic models are used to extend drivetrain life in design and operation. These slides will demonstrate how Sentient Science solved fretting fatigue failures on a spline component in a Blackhawk platform by evaluating new coatings and duty cycles with computational testing. Life extension programs for bearings and gears in the Blackhawk will also be shown.
When it comes to offshore wind energy technology, most innovations are dedicated to foundations or construction techniques to lower LCOE by lowering CapEx and OpEx, but we are reaching an inflection point and AEP needs to be prioritized. Wind park controls and operations methods for revenue and power maximization being developed for onshore wind will be fundamentally necessary to leverage in order to drive maximum offshore LCOE benefit as the CapEx impact on reducing LCOE slows down in the coming years.
Adapting Project Productivity to a Different World of Competition by Harry Be...AVEVA Group plc
The oil & gas industry faces long-term price pressures from new competitors and future project portfolios need to be scalable and flexible, avoiding the high risks, costs, and poor productivity of the past. Lessons in efficient manufacturing will need to be learned. Industry expert, Harry Benham, formerly Shell, explains how to put energy projects back on track and discusses the 5 key actions to catalyze reduction in project size and complexity and increase performance.
Find out more how AVEVA can transform your business here >> www.aveva.com
DigitalClone for Engineering Supporting Business Initiatives of Rotorcraft OE...Sentient Science
Sentient Science’s DigitalClone for Engineering Software is used by aircraft OEM, Suppliers and Operators to evaluate new and upgrade designs through materials science-based computational testing. The software is used throughout the design cycle to life critical components within the drivetrain. DigitalClone for Engineering enables certified digital models to be used by aircraft operators for asset management and supply chain planning and demand forecasting by simulating the models under multiple operational profiles.
The economics of reducing the cost of energy by 13% revenuesSentient Science
At what “speed” is your digitalization effort? There is no dispute, digitalization will play a key role in improving the sustainability of renewable energy sources through efficiency. The question remains – Where are you? While the industry has embraced the importance, water cooler conversations continue - How to monetize the true value of the data from digitalization?
The webinar outlines:
• How digitalization is applied across all corporate business units: asset management, operations management, risk management and supply chain management to reduce the cost of energy by up to 13%
• An industry operator case study on monetizing your digitalization efforts and understand the true ROI
• A digitalization value statement to enable operations management can provide a short-term watch list from 0-12 months enabling early detection prior to consequential damage beyond an operator's current capabilities – attributes to 2-3% of cost avoidance or cost savings.
AVEVA Integrated Shipbuilding Solution by Robert Pesut, BrodosplitAVEVA Group plc
Robert Pesut, Brodosplit, presents the ‘Integrated Shipbuilding Solution’ at the AVEVA World Summit 2016, New Orleans. Robert discusses the implementation process of the integrated shipbuilding solution into the shipyard that is under restructuring process. As a result of using AVEVA Marine and ERM solutions the project will see improved design speed, reduced design time and improved production planning. Find out more how AVEVA can transform your business >> www.aveva.com
This is a unique webinar designed specifically for our customers that want to know more about the validation of our model. We put together this slide deck and discussion together to solely review our validations in the wind industry.
How Material Science Helps Operators with End of Warranty InspectionsSentient Science
Learn:
How your fleet is performing and learn how to develop a component watch list over the next 6 months.
Preventative maintenance strategies to extend the life of your fleet beyond 20 years.
The amount of future repairs, components or gearbox exchanges that are needed at the end of your warranty.
An enhanced view of your end of warranty options using material science-based computational testing.
With programs such as U.S. Army Future Vertical Lift (FVL), how can I predict rotorcraft drivetrain life and solve premature failures before they occur?
Behrooz Jalalahmadi, PhD., Lead Scientist for DigitalClone Component, has outlined how prognostic models are used to extend drivetrain life in design and operation. These slides will demonstrate how Sentient Science solved fretting fatigue failures on a spline component in a Blackhawk platform by evaluating new coatings and duty cycles with computational testing. Life extension programs for bearings and gears in the Blackhawk will also be shown.
When it comes to offshore wind energy technology, most innovations are dedicated to foundations or construction techniques to lower LCOE by lowering CapEx and OpEx, but we are reaching an inflection point and AEP needs to be prioritized. Wind park controls and operations methods for revenue and power maximization being developed for onshore wind will be fundamentally necessary to leverage in order to drive maximum offshore LCOE benefit as the CapEx impact on reducing LCOE slows down in the coming years.
DASA Innovation Partner, Tony Collins, discusses International Outreach.
DASA Senior Exploitation Manager, Eleanor Rice, discusses exploitation of innovation.
DASA Access to Mentoring and Finance Lead, Alan Scrase, discusses how his support will add value
Spreading the risk, piling up the opportunities - offshore wind diversification StephenGeoMills
Alan Duncan's presentation to AllEnergy in Glasgow on 5 May about the opportunities, especially for oil and gas companies for new entrants in offshore wind.
Alan Duncan's presentation to the AllEnergy Conference in Glasgow, 5 May 2016 on the opportunities in offshore wind for new entrants, especially those from the Oil & Gas secor
Alan Duncan's All Energy 2017 Offshore wind: the importance of the supply chainBVG Associates
This is Alan Duncan's presentation delivered at All-Energy 2017 outlining the importance of the supply chain in offshore wind industry and the role for oil and gas companies
Opportunities in the journey to ‘subsidy free’ StephenGeoMills
Bruce Valpy's presentation to AllEnergy Conference in Glasgow on 4 May on how the offshore wind industry can get to subsidy free and the opportunities that presents to the supply chain
Empowering Net-Zero: Digital Insights and Funding Opportunities for Industria...IES VE
With the much anticipated Industrial Energy Transition Fund (IETF) Phase 3 currently open for applications until 19th April, and a recent influx of funding announcements geared towards the decarbonisation of energy intensive facilities, including manufacturing sites and data centres, the time has never been better explore the technologies and funding support available to accelerate your decarbonisation action plan.
In this on-demand webinar, learn more about the technology and funding application support available from IES to deliver successful decarbonisation and energy efficiency strategies for high energy use manufacturing and industrial facilities, as well as other IETF eligible sites, such as data centres. Alongside a live technology demonstration, our expert team discussed the latest IETF Phase 3 funding guidance, and provide an overview of the various decarbonisation feasibility, energy efficiency and monitoring and verification (M&V) studies that IES can provide to support relevant funding application requirements and deliver on broader energy efficiency and decarbonisation objectives.
£10m funding support for Zero Emission Vehicle innovation.
The webinar will allow attendees to hear about the new funding opportunity. The top-level details are as follows:
- Application period opens 17 June and closes 29 July
- Single or up to two partner collaborations
- Focus around feasibility studies and R&D projects
- Projects delivery in six months
- Focused on ZEV innovation including battery and charging technologies
It is vital that businesses of all sizes, academics, RTOs and local authority representatives join to hear about the scope and details of this funding.
This will be your chance to hear about the funding scope, eligibility criteria and application process and also the chance to take part in a live Q&A with Innovate UK.
Find out more: https://ktn-uk.co.uk/news/catalysing-green-innovation-strand-2
Innovation Conference 5th March 2024.pdfrichard876048
Manufacturing, engineering and tech companies discover grants, funded support and innovation opportunities.
There are plenty of grants and fully funded support to help West Midlands manufacturers with:
· Buying new machinery and equipment- everything from solar panels through machines to robotics
· Energy Efficiency and Net Zero Grants- discover regional grants for up to £100,000 and national grants for over £100,000
· Automation- there is support available to help you increase productivity through automation
· Pivot into new markets- discover support to help you supply into other markets
· Developing new products, services, and processes
· Innovation Accelerators- find out how the new Clean Tech, Clean Futures and Biochar Clean Tech Accelerators can help you to develop innovative solutions through grants and expert support
You will hear about the local, regional and national grants and support available to help with capital expenditure and energy efficiency.
Speakers and panellists include:
· Rowan Crozier MBE, the CEO of Birmingham manufacturer, Brandauer and Chair of the National Advisory Board for Make UK
· Chris Greenough, Chief Commercial Officer of SDE Technology supporting innovation in the manufacturing sector for over 29 years
· Paul Milne, Warwick Manufacturing Group
· Grants, growth and innovation experts from Innovate UK
· Melissa Snover from Birmingham-based, Nourished, a high-growth business innovating in the 3D printing of personalised vitamins
· Johnathan Dudley from Crowe UK has supported the rapid growth of various manufacturers in the West Midlands
· Mike Owens, MD of Schumacher Packaging and Vice President of the Birmingham Chamber of Commerce
· Kirsty Davies-Chinnock, MD of Professional Polishing Services in the Black Country and Founder of Women in Metal
Technology
There are grants, large and small, and plenty of free support for technology and digital businesses.
You will hear about:
· The West Midlands Health Tech Innovation Accelerator- this major programme is supporting companies in or want to supply into the Health Tech and Med Tech sectors including funded support from a raft of established organisations including UoB, UHB, BCU, WMG, the MTC, Aston University, Medilink and others as well as grants for up to £150,000
· Grants, funded support, and new opportunities- there are plenty of local, regional, and national grants available to technology, digital, and service companies for up to £100,000. There is also a ton of support. Join us to find out more.
· DIATOMIC (Digital InnovAtion TransfOrMatIve Change) Accelerator- offering support and funding to digital innovators
· Large grants- for those with game-changing ideas, there is a range of large grants, including Smart Grants for up to £2m. Find out how to apply.
Alun Roberts presentation to the RUK conference in Liverpool in October 2015. Learn why measuring local content is important and the best and most robust way of doing so.
Offshore wind technology cost reduction one year on Bruce Valpy Feb 2013BVG Associates
Presentation to EWEA in February 2013 on the progress made in wind technology cost reduction following a year after the UK government white paper and the Crown Estate study into cost reduction possibilities
Rationing offshore wind in a post-subsidy worldBVG Associates
BVGA's Associate Director Mike Blanch's presentation given at Renewable UK's Global Offshore Wind event in Manchester, June 2018 on the challenge of running capacity auctions if generation does not require any subsidy.
Alun Roberts presentation to Offshore Renewables - Wind conference in London December 6 about new offshore wind projects in the pipeline and the consequential demands for the supply chain.
Innovation and cost reduction in offshore windBVG Associates
Kate Freeman's presentation at the Offshore Wind Journal Conference, February 2017. In Innovation and cost reduction on offshore wind she discusses how innovations impact costs - including the big impact time savings can have.
Alun Roberts presentation to Offshore WIND 2016 in Amsterdam on supply chain plans based on experience in the UK and lessons to be learnt across Europe
Presentation by Mike Blanch delivered at the 3rd Annual Atlantic Stakeholder Platform conference on the MARIBE projects evaluating value of shared platform/space projects
Can Combining with Other Blue Sectors Further Reduce Offshore Wind's LCOE?BVG Associates
Mike Blanch's presentation on the MARIBE Project's work on the impact of shared platforms and sites on offshore wind levellised costs of energy (LCOE) delivered at Renewable UK's Global Offshore Wind Conference in Manchester June 2016
Where did the "The Saudi Arabia of Renewables' story go wrong?BVG Associates
Alan Duncan's presentation to Scottish Renewables Future 2016 event in Edinburgh 26 May 2016 highlighting the current state of Scotland's offshore wind industry and what needs to be done for it to fulfill its promise
Will combining sectors deliver blue growthBVG Associates
Mike Blanch's presentation to AllEnergy on behalf of the Maribe Project highlighting the potential impact of different sectors involved in marine economy working together for better results
Giles Hundleby's presenation on Wave and Tidal Cost reduction delivered at ICOE 2016, Edinburgh, February 2016. He outlines that the industry needs to take a radical new approach to be successful.
Does the permitting process in France need a further overhaul?BVG Associates
Presentation given by Mike Blanch and Clare Davis at MRE Manche in October 2015 on the permitting process in France and comparing it with other countries
UK offshore wind vision of the market and technology development Giles Hundl...BVG Associates
An overview of the EU offshore wind market, including the UK and analysis of the cost of energy drives with an assessment potential impact of technology changes
Creating data harmonisation between seven wind farms Martin Elliot 20 Novembe...BVG Associates
The importance of data management and analysis in managing wind farms. A guide to how to collect all the necessary data the most efficient way and the benefits that can arise
Offshore wind farms - can the industry deliver (again) Bruce Valpy October 2010BVG Associates
Presentation Bruce delivered for the Joseph Swan Memorial Lecture, University of Newcastle in October 2010 outlining the history of the wind generation and the lessons to be learnt now
Offshore Cost of Energy NREL WESE Workship Bruce Valpy 14 Jan 2015BVG Associates
Bruce Valpy explains how a useful cost of energy can be calculated and what the trends in the CAPEX and LCOE in Europe can tell us about the future. the impact of a systems engineering approach on LCOE is also discussed
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Stepping stones for floating foundations r02
1. 1/9
Stepping Stone Markets for Floating Foundations
Lessons in technology commercialization
Presentation by Charles Nordstrom, PE
AWEA Offshore WINDPOWER 2015
30 September 2015
Baltimore, MD