Alun Roberts presentation to the RUK conference in Liverpool in October 2015. Learn why measuring local content is important and the best and most robust way of doing so.
SEAI has been undertaking market surveillance relating to the compliance of solid fuel local space heaters available on the Irish market and we would like to inform you of our findings from this work. We will also discuss the introduction of new Ecodesign requirements relating to solid fuel local space heaters which enter into force on the 1st January 2022.
BACS requirements in the revised EPBD: How to check compliance?Leonardo ENERGY
To support EU Member States in implementing the revised Energy Performance of Buildings Directive (EPBD), eu.bac has created a compliance checklist for Building Automation and Control System requirements related to the mandatory capabilities listed in Art.14 and Art.15.
The checklist provides a necessary reference list and highly detailed tool for building owners and managers, compliance inspectors, building designers, installers and policymakers.
In this slide deck:
1. The revised EPBD and the need for a tool to verify BACS compliance (Simone ALESSANDRI)
2. The EPBD BACS Compliance Verification Package (Bonnie BROOK)
3. Compliant BACS: prerequisite to the digital transformation of EU’s built environment (Andrei LITIU)
In this webinar on Certification we are going to explain the various sources of certified data available to Assessors.
Most of these resources have been available since the introduction of BER certification in 2007. While some more experienced Assessors may feel some of the topics should be well known at this point, the purpose of the presentation is to accommodate Assessors of all levels of experience and knowledge.
It is hoped that this Webinar will help Assessors’ understanding of the evidence requirements and acceptable sources of certified data to support DEAP inputs.
Offshore renewables minimising OPEX Bruce Valpy Nantes 21 May 2015BVG Associates
Presentation given by Bruce Valpy, MD of BVGA on how Offshore renewable cost of energy can be minimize OPEX requirements by carrying our the 10 steps to success
The ORE Catapult and Future Opportunities,David Arnold,Technology strategy BoardInvest Northern Ireland
Presentation from the Supply Chain Opportunities in the Onshore and Offshore Wind Operation and Maintenance Sectors held at Down Royal Racecourse, Lisburn 27th November 2013
SEAI has been undertaking market surveillance relating to the compliance of solid fuel local space heaters available on the Irish market and we would like to inform you of our findings from this work. We will also discuss the introduction of new Ecodesign requirements relating to solid fuel local space heaters which enter into force on the 1st January 2022.
BACS requirements in the revised EPBD: How to check compliance?Leonardo ENERGY
To support EU Member States in implementing the revised Energy Performance of Buildings Directive (EPBD), eu.bac has created a compliance checklist for Building Automation and Control System requirements related to the mandatory capabilities listed in Art.14 and Art.15.
The checklist provides a necessary reference list and highly detailed tool for building owners and managers, compliance inspectors, building designers, installers and policymakers.
In this slide deck:
1. The revised EPBD and the need for a tool to verify BACS compliance (Simone ALESSANDRI)
2. The EPBD BACS Compliance Verification Package (Bonnie BROOK)
3. Compliant BACS: prerequisite to the digital transformation of EU’s built environment (Andrei LITIU)
In this webinar on Certification we are going to explain the various sources of certified data available to Assessors.
Most of these resources have been available since the introduction of BER certification in 2007. While some more experienced Assessors may feel some of the topics should be well known at this point, the purpose of the presentation is to accommodate Assessors of all levels of experience and knowledge.
It is hoped that this Webinar will help Assessors’ understanding of the evidence requirements and acceptable sources of certified data to support DEAP inputs.
Offshore renewables minimising OPEX Bruce Valpy Nantes 21 May 2015BVG Associates
Presentation given by Bruce Valpy, MD of BVGA on how Offshore renewable cost of energy can be minimize OPEX requirements by carrying our the 10 steps to success
The ORE Catapult and Future Opportunities,David Arnold,Technology strategy BoardInvest Northern Ireland
Presentation from the Supply Chain Opportunities in the Onshore and Offshore Wind Operation and Maintenance Sectors held at Down Royal Racecourse, Lisburn 27th November 2013
UK Catalysis: Innovation opportunities for an enabling technologyKTN
Read about how accelerating innovations in catalysis will play a vital role in enabling the UK to meet its net zero targets in the areas of hydrogen production, Power-to-X, carbon dioxide utilisation and the use of alternative feedstocks.
2020 status report building integrated photovoltaics BIPVLeonardo ENERGY
Recording at https://youtu.be/gTHO3LItQwM
BIPV Status Report 2020, developed by SUPSI and Becquerel Institute.
Practical handbook to all stakeholders of the BIPV development process, providing insights on the topic from the different perspectives specific to each actor.
Paolo Corti from SUPSI explains the lessons learned in 40 years of BIPV evolution;
Philippe Macé from Becquerel Institute develops the topic of market and value-chain: risks & opportunities;
Elina Bosch from Becquerel Institute explains the cost evaluation of BIPV: cost breakdown & extra cost;
Finally, Pierluigi Bonomo from SUPSI lets us know about the perspectives for BIPV.
Zero Emission Road Freight: Enabling a Future Large Scale Demonstration - Fun...KTN
Join us to find out about a competition addressing zero emission trucks and associated infrastructure.
Please join us at this online briefing where Innovate UK will provide details of a multimillion-pound competition for the demonstration of zero emission road freight.
There will be an opportunity to gain insight to the scope of each strand and ask questions as potential applicants. We will also discuss the role that the UK supply chain can play.
The UK Government is going further and faster to reach net zero across all transport modes, including HGV freight, one of the hardest sectors to decarbonise.
The competition will consist of three strands, addressing zero emission trucks and the associated infrastructure:
1. Electric Road System – in-depth planning, design and pre-deployment studies for a future large-scale freight demonstration.
2. Hydrogen fuel cell freight – in-depth planning, design and pre-deployment studies for a future large-scale freight demonstration.
3. Supply chain technology for zero emission road freight – feasibility studies covering the design, development and manufacturing of zero emission capable freight vehicles in the over 3.5 tonne categories and the infrastructure which will support them.
This will benefit businesses of all sizes (micro, SME and large), academics, RTO and local authorities. We are particularly keen for organisations with relevance and expertise in the following areas to attend:
- HGV and truck OEMs and supporting supply chain
- Transport and logistics operators
- Local authorities
- Academic Institutions and Research Technology Organisations
- Highway Authorities
- Energy providers and regulators
- Infrastructure providers – from refuelling to catenary
- Power Electronics, Machines and Drives
- Batteries and energy storage
- Hydrogen, portable hydrogen storage and hydrogen fuel cells
Quantifying the Benefits of Meteorological services presentation, Claire Ross, London 23 June 2016
The APM Benefits Summit.
APM Benefits Management SIG.
Pat Dunne, Deputy Governor for Compliance at the Irish Prison Service, presents the Exemplar Energy Project at Wheatfield and Cloverhill Prison during the Information Seminar on Energy Performance Contracting, organised by Codema (Dublin's Energy Agency) as part of the EESI2020 project.
Subject: Ex-post impact evaluations of energy efficiency policies in EuropeLeonardo ENERGY
While we enter a transition in the European framework for energy efficiency, ex-post impact evaluations can bring facts and figures about current achievements towards the 2020 targets, and useful feedback to improve policies in view of the 2030 targets.
The Horizon 2020 EPATEE project analysed evaluation practices in EU countries and developed resources to help enhancing them. After a brief overview of these resources, we will present the main lessons learnt from exchanging with evaluation customers and evaluators, with a focus on how to integrate evaluation into the policy cycle. We will also discuss the conclusions from the final EPATEE conference about the challenges and possible developments for evaluation in the coming years.
UK Catalysis: Innovation opportunities for an enabling technologyKTN
Read about how accelerating innovations in catalysis will play a vital role in enabling the UK to meet its net zero targets in the areas of hydrogen production, Power-to-X, carbon dioxide utilisation and the use of alternative feedstocks.
2020 status report building integrated photovoltaics BIPVLeonardo ENERGY
Recording at https://youtu.be/gTHO3LItQwM
BIPV Status Report 2020, developed by SUPSI and Becquerel Institute.
Practical handbook to all stakeholders of the BIPV development process, providing insights on the topic from the different perspectives specific to each actor.
Paolo Corti from SUPSI explains the lessons learned in 40 years of BIPV evolution;
Philippe Macé from Becquerel Institute develops the topic of market and value-chain: risks & opportunities;
Elina Bosch from Becquerel Institute explains the cost evaluation of BIPV: cost breakdown & extra cost;
Finally, Pierluigi Bonomo from SUPSI lets us know about the perspectives for BIPV.
Zero Emission Road Freight: Enabling a Future Large Scale Demonstration - Fun...KTN
Join us to find out about a competition addressing zero emission trucks and associated infrastructure.
Please join us at this online briefing where Innovate UK will provide details of a multimillion-pound competition for the demonstration of zero emission road freight.
There will be an opportunity to gain insight to the scope of each strand and ask questions as potential applicants. We will also discuss the role that the UK supply chain can play.
The UK Government is going further and faster to reach net zero across all transport modes, including HGV freight, one of the hardest sectors to decarbonise.
The competition will consist of three strands, addressing zero emission trucks and the associated infrastructure:
1. Electric Road System – in-depth planning, design and pre-deployment studies for a future large-scale freight demonstration.
2. Hydrogen fuel cell freight – in-depth planning, design and pre-deployment studies for a future large-scale freight demonstration.
3. Supply chain technology for zero emission road freight – feasibility studies covering the design, development and manufacturing of zero emission capable freight vehicles in the over 3.5 tonne categories and the infrastructure which will support them.
This will benefit businesses of all sizes (micro, SME and large), academics, RTO and local authorities. We are particularly keen for organisations with relevance and expertise in the following areas to attend:
- HGV and truck OEMs and supporting supply chain
- Transport and logistics operators
- Local authorities
- Academic Institutions and Research Technology Organisations
- Highway Authorities
- Energy providers and regulators
- Infrastructure providers – from refuelling to catenary
- Power Electronics, Machines and Drives
- Batteries and energy storage
- Hydrogen, portable hydrogen storage and hydrogen fuel cells
Quantifying the Benefits of Meteorological services presentation, Claire Ross, London 23 June 2016
The APM Benefits Summit.
APM Benefits Management SIG.
Pat Dunne, Deputy Governor for Compliance at the Irish Prison Service, presents the Exemplar Energy Project at Wheatfield and Cloverhill Prison during the Information Seminar on Energy Performance Contracting, organised by Codema (Dublin's Energy Agency) as part of the EESI2020 project.
Subject: Ex-post impact evaluations of energy efficiency policies in EuropeLeonardo ENERGY
While we enter a transition in the European framework for energy efficiency, ex-post impact evaluations can bring facts and figures about current achievements towards the 2020 targets, and useful feedback to improve policies in view of the 2030 targets.
The Horizon 2020 EPATEE project analysed evaluation practices in EU countries and developed resources to help enhancing them. After a brief overview of these resources, we will present the main lessons learnt from exchanging with evaluation customers and evaluators, with a focus on how to integrate evaluation into the policy cycle. We will also discuss the conclusions from the final EPATEE conference about the challenges and possible developments for evaluation in the coming years.
Opportunities in the journey to ‘subsidy free’ StephenGeoMills
Bruce Valpy's presentation to AllEnergy Conference in Glasgow on 4 May on how the offshore wind industry can get to subsidy free and the opportunities that presents to the supply chain
Does the permitting process in France need a further overhaul?BVG Associates
Presentation given by Mike Blanch and Clare Davis at MRE Manche in October 2015 on the permitting process in France and comparing it with other countries
UK offshore wind vision of the market and technology development Giles Hundl...BVG Associates
An overview of the EU offshore wind market, including the UK and analysis of the cost of energy drives with an assessment potential impact of technology changes
Driving the Electric Revolution: Supply Chains for Net Zero - Competition Bri...KTN
The Driving the Electric Revolution: Supply Chains for Net Zero £22 milling funding competition aims to facilitate UK supply chains and manufacturing capability growth. Focusing on power electronics, machines and drives (PEMD) it will enable future improvements in productivity, capacity, quality or efficiency for sectors including energy, industrial and transport.
This comprehensive briefing webinar covered the competition scope, eligibility criteria and application process.
Alan Duncan's All Energy 2017 Offshore wind: the importance of the supply chainBVG Associates
This is Alan Duncan's presentation delivered at All-Energy 2017 outlining the importance of the supply chain in offshore wind industry and the role for oil and gas companies
Catalysing Green Innovation: Strand 1, advancing PEMD supply chainKTN
Funding briefing event for the next funding competition for the Driving the Electric Revolution challenge. A comprehensive brief on the competition scope, eligibility criteria and application process with a live question and answer session from Innovate UK.
In response to the disruption caused by COVID-19 to the UK industry, Driving the Electric Revolution is investing up to £5m in innovation projects that will support the UK’s continued push towards net zero. This is part of a larger effort to catalyse the green economic recovery in transport, energy and industrial sectors.
Find out more: https://ktn-uk.co.uk/events/catalysing-green-innovation
£10m funding support for Zero Emission Vehicle innovation.
The webinar will allow attendees to hear about the new funding opportunity. The top-level details are as follows:
- Application period opens 17 June and closes 29 July
- Single or up to two partner collaborations
- Focus around feasibility studies and R&D projects
- Projects delivery in six months
- Focused on ZEV innovation including battery and charging technologies
It is vital that businesses of all sizes, academics, RTOs and local authority representatives join to hear about the scope and details of this funding.
This will be your chance to hear about the funding scope, eligibility criteria and application process and also the chance to take part in a live Q&A with Innovate UK.
Find out more: https://ktn-uk.co.uk/news/catalysing-green-innovation-strand-2
Webinar: The business case for CCS in the power industry: a case study of the...Global CCS Institute
Developing the CCS power industry sustainably requires projects to deliver a suitable return on investment, in order to accommodate the risks inherent in the technology. But, the cost of CCS facilities is not yet covered by electricity sales revenue at current wholesale power prices anywhere in the world, nor is it covered by the ability to earn income from avoiding or reducing CO2 emissions. Building a business case for CCS power is therefore a major challenge.
The Global CCS Institute webinar that was held on Monday 22nd July was presented by 2Co Energy, sharing the real-life CCS business case for its CCS project in the UK, the Don Valley Power Project (DVPP). By sharing this information, 2Co Energy, which is known for its belief in the contribution CO2 Enhanced Oil Recovery (EOR) can make to enhancing the economics of CCS, will present practical information that can be of use to other CCS practitioners as they develop their own business cases for CCS around the world.
The webinar covered the following topics:
A brief overview of 2Co and its CCS project in the UK, DVPP
A brief summary of existing business case studies made by other Members of the Institute, highlighting what was considered most important by them
The market and regulatory context for CCS faced by DVPP and other projects in the UK
The financing challenge that 2Co faces and the resulting financing strategy
The resulting business plan, including revenue and cost profiles, sensitivities and prospects for future cost reduction
Key risks to the project and mitigation plans.
The webinar will be of interest to CCS business developers, commercial professionals, policy makers, and regulators with an interest in enabling a CCS power industry.
Offshore Cost of Energy NREL WESE Workship Bruce Valpy 14 Jan 2015BVG Associates
Bruce Valpy explains how a useful cost of energy can be calculated and what the trends in the CAPEX and LCOE in Europe can tell us about the future. the impact of a systems engineering approach on LCOE is also discussed
Industrial Energy Transformational Fund Phase 2 Spring 2022 - Competition Bri...KTN
The Phase 2 competition for England, Wales and Northern Ireland opens on the 31st January 2022 and runs until 29th April 2022 and is worth up to £60 million in funding.
Stepping stones for floating foundations r02BVG Associates
Charlie Nordstrom presentation to the AWEA WINDPOWER Conference in Baltimore September 2015 outlining the best route to market for floating foundations in offshore wind energy deployments
RE:FIT LONDON – Making London a resilient, sustainable and resource efficient...EMEX
The Mayor of London works to make London a more resilient, sustainable and resource efficient city, where businesses want to be based and where people want to live and work.
To achieve the Mayor’s vision for the environment, the GLA develops and delivers a set of results-focused programmes. These programmes also create jobs and attract investment in areas such as waste recycling, water, green infrastructure, energy and the low carbon and green economy.
RE:FIT and RE:NEW are the Mayor of London award-winning programmes to help make London homes, non-domestic buildings and assets more energy efficient by cutting carbon emissions and energy bills. These programmes support organisations to develop and bring their energy efficiency projects to market.
The Mayor’s DEPDU Successor programme – 50% funded by the European Regional Development Fund (ERDF) - is set up to support the Mayor’s target of 25 per cent of London’s energy to be generated through Decentralised Energy (DE) by 2025. The programme supports others to develop and bring their DE projects to market.
Challenges and best practices in financing to accelerate industry decarbonisa...OECD Environment
"Challenges and best practices in financing to accelerate industry decarbonisation", OECD Series of Webinars on low carbon hydrogen and industry decarbonisation, 14 June 2023
Rationing offshore wind in a post-subsidy worldBVG Associates
BVGA's Associate Director Mike Blanch's presentation given at Renewable UK's Global Offshore Wind event in Manchester, June 2018 on the challenge of running capacity auctions if generation does not require any subsidy.
Alun Roberts presentation to Offshore Renewables - Wind conference in London December 6 about new offshore wind projects in the pipeline and the consequential demands for the supply chain.
Innovation and cost reduction in offshore windBVG Associates
Kate Freeman's presentation at the Offshore Wind Journal Conference, February 2017. In Innovation and cost reduction on offshore wind she discusses how innovations impact costs - including the big impact time savings can have.
Alun Roberts presentation to Offshore WIND 2016 in Amsterdam on supply chain plans based on experience in the UK and lessons to be learnt across Europe
Presentation by Mike Blanch delivered at the 3rd Annual Atlantic Stakeholder Platform conference on the MARIBE projects evaluating value of shared platform/space projects
Can Combining with Other Blue Sectors Further Reduce Offshore Wind's LCOE?BVG Associates
Mike Blanch's presentation on the MARIBE Project's work on the impact of shared platforms and sites on offshore wind levellised costs of energy (LCOE) delivered at Renewable UK's Global Offshore Wind Conference in Manchester June 2016
Where did the "The Saudi Arabia of Renewables' story go wrong?BVG Associates
Alan Duncan's presentation to Scottish Renewables Future 2016 event in Edinburgh 26 May 2016 highlighting the current state of Scotland's offshore wind industry and what needs to be done for it to fulfill its promise
Will combining sectors deliver blue growthBVG Associates
Mike Blanch's presentation to AllEnergy on behalf of the Maribe Project highlighting the potential impact of different sectors involved in marine economy working together for better results
Alan Duncan's presentation to the AllEnergy Conference in Glasgow, 5 May 2016 on the opportunities in offshore wind for new entrants, especially those from the Oil & Gas secor
Giles Hundleby's presenation on Wave and Tidal Cost reduction delivered at ICOE 2016, Edinburgh, February 2016. He outlines that the industry needs to take a radical new approach to be successful.
Creating data harmonisation between seven wind farms Martin Elliot 20 Novembe...BVG Associates
The importance of data management and analysis in managing wind farms. A guide to how to collect all the necessary data the most efficient way and the benefits that can arise
Offshore wind farms - can the industry deliver (again) Bruce Valpy October 2010BVG Associates
Presentation Bruce delivered for the Joseph Swan Memorial Lecture, University of Newcastle in October 2010 outlining the history of the wind generation and the lessons to be learnt now
Offshore wind technology cost reduction one year on Bruce Valpy Feb 2013BVG Associates
Presentation to EWEA in February 2013 on the progress made in wind technology cost reduction following a year after the UK government white paper and the Crown Estate study into cost reduction possibilities
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.