StartOff ACCL Series are designed to connect mains supply to load till mains is present. On mains failure and receiving generator power, it connects the load to DG supply. During DG operation, load drawn is monitored. If the load exceeds the allotted limit, it disrupts the supply and rechecks in intervals. On reducing the load and keeping it within the limit, load is connected to DG supply. For different applications, we have
specific models. They are with load limiter, without load limiter, transfer of load from one phase to other phase and many additional functions.
Subtech:Automatic Changeover,ACCL, AMF Panel, Motor Starter etc.latesh sharma
Since 1995, we have established ourselves as a manufacturer and exporter of generator control devices, Water tank automation product and support components like AMF Panels, Automatic Changeovers up to 1000 kva, Timers, Automatic Motor Starter, Water Pump Controller, Power management system with Dual Source Prepaid Energy Meter & others electronic/electrical devices for automation of power which are better known for their compatibility, functionality and life-long services. We put great stress on quality of products & customer's satisfaction.
Power grid synchronization failure detection and recoveryeSAT Journals
Abstract As the power grid failure problems continue to persist in the country, need arises to make it more efficient and effective. This is a
demonstration devised to provide such kind of a system that could detect the failure in synchronous working of the power grid in
case any external supply source that is supplying to the grid is encountering any kind of abnormalities may be in current levels,
voltage levels, temperature and oil level. There are various generation units that usually supply power to the grids such as
thermal plants, solar plants, hydro-electric plants etc. All the generation units that connect to the grid have to obey the rules or
standards laid down for the operation of a grid. These rules involve maintaining of voltage variation, current variation, oil-level
variation and temperature variation within these specified limits. If there are any kind of abnormalities or deviations from the
acceptable limits laid down by the grid, it then gets crucial that the particular feeding source should get automatically
disconnected from the entire grid temporarily, this process is widely termed islanding. This would prevent large scale occurrences
of events of black outs. Hence it would be beneficial and wise if we could have a system that would be so efficient that it could
issue intimations about the potential variations in the arrangements and in addition provide the exact distance of the fault
location on a feeder line from the base grid and keep the particular source temporarily on a standby basis while this process takes
place. Variation of the system voltage should be around +-5% as per central electricity authority of India Regulations, 2010. This
paper is an approach on devising out a system that helps the grid resolve problems related to black out situations hence making it
a smart grid.
Keywords: - current variation, voltage variation, temperature variation, oil level detection, islanding, smart grid,
active method, passive method.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...Pradeep Avanigadda
The project is designed to develop a system to detect the synchronization failure of any external supply source to the power grid on sensing the abnormalities in frequency and voltage.
There are several power generation units connected to the grid such as hydel, thermal, solar etc to supply power to the load. These generating units need to supply power according to the rules of the grid. These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable limit of the grid it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is termed as islanding. This prevents in large scale brown out or black out of the grid power. So it is preferable to have a system which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUENCYPradeep Avanigadda
This paper presents the development of a microcontroller based islanding detection for grid connected inverter with very simple under/over voltage and under/over frequency islanding detection algorithms.
The microcontroller monitors the under/over voltage and under/over frequency from utility grid and the processed value of voltage and frequency for turning ON/OFF the relay between a grid connected inverter and the utility grid.
The project would alternatively use a variable frequency generator using 555timer for changing the frequency while a standard variac shall be used to vary the input voltage for achieving the test conditions as stated above.
Subtech:Automatic Changeover,ACCL, AMF Panel, Motor Starter etc.latesh sharma
Since 1995, we have established ourselves as a manufacturer and exporter of generator control devices, Water tank automation product and support components like AMF Panels, Automatic Changeovers up to 1000 kva, Timers, Automatic Motor Starter, Water Pump Controller, Power management system with Dual Source Prepaid Energy Meter & others electronic/electrical devices for automation of power which are better known for their compatibility, functionality and life-long services. We put great stress on quality of products & customer's satisfaction.
Power grid synchronization failure detection and recoveryeSAT Journals
Abstract As the power grid failure problems continue to persist in the country, need arises to make it more efficient and effective. This is a
demonstration devised to provide such kind of a system that could detect the failure in synchronous working of the power grid in
case any external supply source that is supplying to the grid is encountering any kind of abnormalities may be in current levels,
voltage levels, temperature and oil level. There are various generation units that usually supply power to the grids such as
thermal plants, solar plants, hydro-electric plants etc. All the generation units that connect to the grid have to obey the rules or
standards laid down for the operation of a grid. These rules involve maintaining of voltage variation, current variation, oil-level
variation and temperature variation within these specified limits. If there are any kind of abnormalities or deviations from the
acceptable limits laid down by the grid, it then gets crucial that the particular feeding source should get automatically
disconnected from the entire grid temporarily, this process is widely termed islanding. This would prevent large scale occurrences
of events of black outs. Hence it would be beneficial and wise if we could have a system that would be so efficient that it could
issue intimations about the potential variations in the arrangements and in addition provide the exact distance of the fault
location on a feeder line from the base grid and keep the particular source temporarily on a standby basis while this process takes
place. Variation of the system voltage should be around +-5% as per central electricity authority of India Regulations, 2010. This
paper is an approach on devising out a system that helps the grid resolve problems related to black out situations hence making it
a smart grid.
Keywords: - current variation, voltage variation, temperature variation, oil level detection, islanding, smart grid,
active method, passive method.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUE...Pradeep Avanigadda
The project is designed to develop a system to detect the synchronization failure of any external supply source to the power grid on sensing the abnormalities in frequency and voltage.
There are several power generation units connected to the grid such as hydel, thermal, solar etc to supply power to the load. These generating units need to supply power according to the rules of the grid. These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable limit of the grid it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is termed as islanding. This prevents in large scale brown out or black out of the grid power. So it is preferable to have a system which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure.
DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING BAD VOLTAGE OR FREQUENCYPradeep Avanigadda
This paper presents the development of a microcontroller based islanding detection for grid connected inverter with very simple under/over voltage and under/over frequency islanding detection algorithms.
The microcontroller monitors the under/over voltage and under/over frequency from utility grid and the processed value of voltage and frequency for turning ON/OFF the relay between a grid connected inverter and the utility grid.
The project would alternatively use a variable frequency generator using 555timer for changing the frequency while a standard variac shall be used to vary the input voltage for achieving the test conditions as stated above.
Detection of power grid synchronization failure on sensing of frequency and v...bharath nidumolu
In an alternating current electric power system, synchronization is the process of matching the speed and frequency of
a generator or other source to a running network. An AC generator cannot deliver power to an electrical grid unless it is
running at the same frequency as the network. There are several power generation units connected to the grid such as hydra,
thermal, solar etc., to supply power to the load. These generating units need to supply power according to the rules of the grid.
These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable
limit of the grid, it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is
termed as islanding. This prevents in large scale brown out or black out of the grid power. So, it is preferable to have a system
which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure. In this
paper hardware controller based system to identify the abnormalities and to disconnect the faulted part from the grid is proposed
(www.indiamart.com/accuratepowersystems) We Accurate Power Systems are a leading Trader and Distributor of a wide range of Diesel Generator, Online UPS, Servo Voltage Stabilizer, Lighting Tower, Industrial Transformers, Compact Substation, etc.
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...Edgefxkits & Solutions
Synchronization means the minimization of difference in voltage, frequency and phase angle between the corresponding phases of the generator output and grid supply. An alternating current generator must be synchronized with the grid prior to connection. It can’t deliver the power unless it is running at same frequency as the network.
Design and Construction of Automatic Three Phase Power System Selectoriosrjce
The automatic three phase power system selector was designed and constructed. The device
automatically switches over to the alternative phase that has current when there is power outage or extremely
low current in the phase which the load is connected without the power being off. The selector links the load and
the other phases and relay switches allowing the usage of the remaining phases where there is outage on the
mains source without disturbing or interrupting the load. It maintains constant power supply to the load by
automatically activating the phases when the need arises. This safeguards the electronics system from being
damaged and burnout as a result of voltage instability, collapse, insistent outages which are paramount in
under developed and developing countries
Auto power supply control from 4 different sources using pic microcontrollerEdgefxkits & Solutions
This project is used to provide uninterrupted power supply to a load by selecting the supply source automatically from any available one out of 4 sources.
Automated load shedding using microcontrollerRajVerma175
In this proposed model automated load shedding can be using microcontroller and relay module. this model is applicable only based on voltage sagging but it can be made based on current only replacing transformer to current transformer.
The main feature of this power supply is, when no load is there it automatically switches off. It is a circuit which mainly act as a protector circuit and achieved through an arrangement of transistors and relay. Embedded system
requires a regulated power supply. This power supply circuit gives a variable regulated supply and switches off in no load condition.
Detection of power grid synchronization failure on sensing of frequency and v...bharath nidumolu
In an alternating current electric power system, synchronization is the process of matching the speed and frequency of
a generator or other source to a running network. An AC generator cannot deliver power to an electrical grid unless it is
running at the same frequency as the network. There are several power generation units connected to the grid such as hydra,
thermal, solar etc., to supply power to the load. These generating units need to supply power according to the rules of the grid.
These rules involve maintaining a voltage variation within limits and also the frequency. If any deviation from the acceptable
limit of the grid, it is mandatory that the same feeder should automatically get disconnected from the grid which by effect is
termed as islanding. This prevents in large scale brown out or black out of the grid power. So, it is preferable to have a system
which can warn the grid in advance so that alternate arrangements are kept on standby to avoid complete grid failure. In this
paper hardware controller based system to identify the abnormalities and to disconnect the faulted part from the grid is proposed
(www.indiamart.com/accuratepowersystems) We Accurate Power Systems are a leading Trader and Distributor of a wide range of Diesel Generator, Online UPS, Servo Voltage Stabilizer, Lighting Tower, Industrial Transformers, Compact Substation, etc.
Detecting Power Grid Synchronization Failure on Sensing Frequency or Voltage ...Edgefxkits & Solutions
Synchronization means the minimization of difference in voltage, frequency and phase angle between the corresponding phases of the generator output and grid supply. An alternating current generator must be synchronized with the grid prior to connection. It can’t deliver the power unless it is running at same frequency as the network.
Design and Construction of Automatic Three Phase Power System Selectoriosrjce
The automatic three phase power system selector was designed and constructed. The device
automatically switches over to the alternative phase that has current when there is power outage or extremely
low current in the phase which the load is connected without the power being off. The selector links the load and
the other phases and relay switches allowing the usage of the remaining phases where there is outage on the
mains source without disturbing or interrupting the load. It maintains constant power supply to the load by
automatically activating the phases when the need arises. This safeguards the electronics system from being
damaged and burnout as a result of voltage instability, collapse, insistent outages which are paramount in
under developed and developing countries
Auto power supply control from 4 different sources using pic microcontrollerEdgefxkits & Solutions
This project is used to provide uninterrupted power supply to a load by selecting the supply source automatically from any available one out of 4 sources.
Automated load shedding using microcontrollerRajVerma175
In this proposed model automated load shedding can be using microcontroller and relay module. this model is applicable only based on voltage sagging but it can be made based on current only replacing transformer to current transformer.
The main feature of this power supply is, when no load is there it automatically switches off. It is a circuit which mainly act as a protector circuit and achieved through an arrangement of transistors and relay. Embedded system
requires a regulated power supply. This power supply circuit gives a variable regulated supply and switches off in no load condition.
Save on refrigeration freezers and ventilation. UST Power saves 8% to 15% on the power of your entire supermarket. When you place a UST power conditioner between the grid and your critical equipment, you can be assured that common electrical anomalies, of any intensity or duration, will be stopped and corrected within, depending on
your needs, one, two or three cycles and an efficiency of 99%. At an incomming voltage of 230V +/- 10%, the nominal output voltage can be set to 215V +/- 1%.
Smart – Optimizer ECOD implements 7 functions in a single units
Optimization of energy consumption
Power factor correction
Harmonic filtering
Balancing phases
Limit the maximum inrush current
Solving problems with short-term voltage drops
Lightning protection
Improving the quality of electricity with Smart - Optimizer ECOD
Feigin Electric Co., Ltd., provides many benefits, including:
• Optimization of energy consumption;
• Power factor correction;
• Harmonic filtering ;
• Balancing phases;
• Limits the maximum inrush current;
• Troubleshooting short-term voltage drops;
• Protection against lightning;
• Minimize typical system losses;
• Increasing the efficiency of the energy system;
• Reduced maintenance of equipment;
• Increased reliability of electrical equipment;
• Provide opportunities to increase the number of powered devices
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
State of ICS and IoT Cyber Threat Landscape Report 2024 preview
StartOff ACCL [Automatic Source Changeover cum Current Limiter
1. cÜxáxÇàá
100% R e l i a b l e P o w e r S h a r i n g S y s t e m
another technology leap from
Series
TM
AUTOMATIC SOURCE CHANGEOVER
j|à{ CURRENT LIMITER [ACCL]
2. AUTOMATIC SOURCE CHANGEOVER j|à{ CURRENT LIMITER
[Digital]Series
TM
Features
Micro-Controller based design
Automatic Source Change Over
Break before make change-over system
Neutral isolation for all models
Current Limiting function
Counter for number of interruptions, thereby
protecting your valuable equipment
Prevents over loading of the Generator
LED / Digital indication of Status
Saving in wiring and wall space
Energy Saving... Reduction of CO2 Emission
Functions
When the Mains Supply is available
The load is connected to the Mains supply (after initial delay) and the consumer can draw the full load as per the Sanctioned rating.
When the Mains Supply fails and Standby Generator Supply is available
The consumers are connected to the generator in a sequence depending upon the pre-set ‘Initial Delay’* timing, in order to limit the sudden load on
the Generator. The Unit Monitors the Current at factory “Set Limit”. *
If the Current exceeds the limit, the load is disconnected 5 times in 1 second intervals as a warning and then, automatically reconnects it after 5
minutes *. This cycle of interruptions and warning repeats 2 times and unless the load is reduced to the set limit the power supply will permanently
disconnected. The supply will be re connected only by an operator manually or when the Main / Dg supply restarts. During this period, the Consumer
is expected to switch off the non-essential loads and reduce it to within the limit.
When the load is within the ‘Set Limit’, the Generator continues to supply the load.
The supply from the Generator to the load can be restored after the Generator connection is reset by switching OFF/ON the Gen MCB. Or by pushing
the reset button on the StartOff unit.
When the Mains supply is restored
The Load is automatically transferred to the Mains supply after pre-set time.
LED Indicators: Over Voltage, Under Voltage, Over Load, Mains On, Generator On
Digital display: 2 line /4 line digital display : All the above status.
* These Parameters can be Pre-Programmed depending upon requirements of Customers and also can be Re-programmed at any time.
Automatic Load Changeover Relay is a high precession system for efficient distribution
of generator power in multi-storied apartments, commercial complexes etc.
StartOff ACCL Series are designed to connect mains supply to load till mains is
present. On mains failure and receiving generator power, it connects the load to DG
supply. During DG operation, load drawn is monitored. If the load exceeds the allotted
limit, it disrupts the supply and rechecks in intervals. On reducing the load and keeping
it within the limit, load is connected to DG supply. For different applications, we have
specific models. They are with load limiter, without load limiter, transfer of load from
one phase to other phase and many additional functions.
Special Features
Over Voltage (OV) / Under Voltage (UV) protection by intelligent
sensing technology.
This feature provide maximum protection to consumer’s electrical
equipment caused by voltage fluctuations or Over Voltage or
Under Voltage problems from EB and DG sides.
In both events, the StartOff ACCL automatically turn itself off and
protect the entire power supply system.
Under Voltage protection system save the Generator from
possible damages.
StartOff ACCL can with-stand high voltage fluctuations up to 300v
without any damage to the unit and thereby its life is very long
compared to any other brands.
Because of the high quality of components and the quality
controlled workmanship, StartOff ACCL unit is almost maintenance
free.
The Ultimate Solution for your power distribution needs…
Maintenance Service within 24 hours!
StartOff Products are engineered to provide you
uninterrupted hassle free performance. The product
is almost maintenance free for years. Even though,
StartOff service team is equipped to provide faster
service within 24 hours in case of any trouble.
3. Series
TM
SPECIFICATIONS
Technology Microprocessor Based
Frequency 50 Hz
EB Load Current 16 A, 32 A, 40 A , 63 A, 80 A, 100 A, 125 A *
DG Load Current 16 A, 32 A, 40 A 63 A, 80 A, 100 A, 125 A *
DG Max Current Range [Limiter] (Factory Set) 0.1 A to 30A *
Models
1 Phase EB & 1 Phase DG
3 Phase EB & 3 Phase DG
3 Phase EB & 1 Phase DG
Product Warranty 18 Months **
Enclosure Powder Coated Cabinet
Display LED / Digital
*
**
Specifications can be changed upon customer requirements.
12 months Replacement + 6 Months Service.
Product Specifications
…A leap ahead
Model Range
MODEL SPECIFICATIONS PHASE [EB] PHASE [DG] MOUNTING
SOP16LX EB16A/DG LIMITER 200W‐1500W SINGLE/THREE SINGLE PANEL
SOP1616 EB16A/DG 16A NON LIMITER SINGLE/THREE SINGLE/THREE PANEL
SOD16LX EB16A/DG LIMITER 200W‐1500W SINGLE/THREE SINGLE DB
SOP30LX EB30A/DG LIMITER 200W‐5000W SINGLE/THREE SINGLE PANEL
SOP3030 EB30A/DG 30A NON LIMITER SINGLE/THREE SINGLE/THREE PANEL
SOD30LX EB30A/DG LIMITER 200W‐5000W SINGLE/THREE SINGLE DB
SOP40LX EB40A/DG LIMITER 200W‐5000W THREE SINGLE PANEL
SOP4040 EB40A/DG NON LIMITER THREE THREE PANEL
SOD40LX EB40A/DG LIMITER 200W‐5000W THREE SINGLE DB
SOP60LX EB60A/DG LIMITER 200W‐5000W THREE SINGLE PANEL
SOP6060 EB60A/DG NON LIMITER THREE THREE PANEL
SOP80LX EB80A/DG LIMITER 200W‐5000W THREE SINGLE PANEL
SOP8080 EB80A/DG NON LIMITER THREE THREE PANEL
SOP100LX EB100A/DG LIMITER 200W‐5000W THREE SINGLE PANEL
SOP100100 EB100A/DG NON LIMITER THREE THREE PANEL
SOP125LX EB125A/DG LIMITER 200W‐5000W THREE SINGLE PANEL
SOP125125 EB125A/DG NON LIMITER THREE THREE PANEL
Panther Techno Labs
Karassery [P.O], Mukkam, Pin: 673602
Calicut, Kerala, India.
Tel: +91 9447950498, +91 9744212586
Email: panthertechnolabs@gmail.com
™
Division
For enquiries:
All Specifications and settings can be customized as per the requirement of specific needs