Speed Detection Camera
•Download as PPTX, PDF•
6 likes•2,576 views
This document summarizes a seminar presentation on speed detection cameras. It introduces speed cameras and their use in traffic control and enforcement. The document explains that speed cameras use Doppler radar to detect the speed of passing vehicles based on the change in frequency of electromagnetic waves. It describes the basic architecture of speed cameras, including a signal generator and principles of Doppler effect for calculating speed. Potential future applications are identified, such as integrating helmet detection and identifying unsafe driving behaviors. The presentation concludes that speed cameras can reduce accidents and protect road users while also providing revenue.
Report
Share
Report
Share
Recommended
Speed Detecting Camera by Kandarp Tiwari
Speed detection cameras use Doppler radar to detect the speed of passing vehicles and automatically issue tickets to drivers exceeding the speed limit. They were first introduced in the 1980s in London and have since been widely adopted to reduce traffic accidents. Speed cameras work by transmitting radar beams and using the Doppler effect to measure the change in frequency of the reflected beams, from which they can calculate a vehicle's speed. Modern speed cameras provide accurate speed readings even in rain and can simultaneously detect multiple vehicles. While controversial, studies show speed cameras are effective at reducing speeding and promoting road safety when paired with public awareness campaigns.
Speed detection using camera
This document summarizes how speed cameras detect vehicle speed using Doppler radar technology. Speed cameras transmit radar signals that bounce off vehicles and return to the camera. The difference in frequency of the transmitted and returned signals, known as the Doppler effect, allows the camera to calculate the vehicle's speed. Speed cameras were introduced in the 1990s and have been shown to reduce road accidents and casualties by deterring speeding. The document discusses how Doppler radar works, the basic components and principles of speed cameras, and their effectiveness even in poor weather conditions. It stresses the importance of public awareness about how speed cameras promote road safety.
speed detection speed camera
This document discusses speed cameras. It begins with an introduction and then describes the basic principles of speed cameras including Doppler effect. It discusses different types of speed cameras like Gastometer, peak traffic, and SPECS cameras. It explains how speed cameras use radar or lidar with Doppler effect to detect vehicle speed. Speed cameras have applications in traffic control, crime control, and reducing accidents. The document concludes stating that speed cameras can reduce accidents by 40% if used widely.
Speed detection-of-moving-vehicle-using-speed-cameras
Speed detection-of-moving-vehicle-using-speed-cameras IS A WAY OF TRAFFIC RULE IMPLETENTION USING VISUAL CAMERA TECHNOLOGY
Speed Detecting Camera by Kandarp Tiwari
This document is a seminar report on speed detecting cameras submitted by a student named Kandarp Kumar Tiwari. It discusses the history and purpose of speed cameras, introducing the Doppler effect principle that speed cameras use to detect vehicle speeds. It describes the basic architecture of speed cameras and examines factors like their ability to operate in rain, their measurement range, reaction time and ability to discriminate targets. The report also covers advantages, future technologies and concludes that speed cameras help enforce speed limits and reduce accidents.
Speed Detection Of Moving Vehicles (Using Traffic Enforcement Camera)
This document discusses traffic enforcement cameras, also known as speed cameras. It begins by introducing the purpose of using speed cameras to reduce traffic violations and enforce speed limits. It then provides details on the types of cameras, including fixed cameras mounted on poles or over roads, mobile cameras, and average speed cameras that calculate a vehicle's speed over a distance. The document discusses the technology behind automatic license plate recognition and how average speed cameras systems work. It concludes by noting that while speed cameras help enforce safety, some drivers try to avoid or evade them, though most of these attempts are illegal.
Speed camera
Speed cameras use radar or LIDAR to detect the speed of passing vehicles and photograph license plates. They operate using the Doppler effect, where the frequency of returned waves is higher if the object is moving towards the source. The first speed cameras were introduced in the Netherlands in the 1950s and London in 1992. Common types include Gatso speed cameras using radar, and newer models can track vehicles across multiple camera locations. While speed cameras reduce accidents and save lives, some criticize that they don't address the main causes of crashes and can induce sudden braking. Future technologies may allow cameras to detect non-use of seatbelts and issue tickets for other infractions.
speed detection camera
This document discusses speed detection cameras and how they measure vehicle speed using Doppler radar. It explains that speed detection cameras use Doppler radar to emit radio waves that bounce off vehicles and return to the camera. By analyzing changes in the frequency of the returned waves compared to what was emitted, due to the Doppler effect, the camera can calculate a vehicle's speed. It also describes that speed detection cameras use day/night cameras to record views of surroundings and vehicle license plates to identify speeding vehicles. The document aims to explain how speed detection cameras work and their purpose of enhancing road safety by limiting speeding and reducing accidents.
Recommended
Speed Detecting Camera by Kandarp Tiwari
Speed detection cameras use Doppler radar to detect the speed of passing vehicles and automatically issue tickets to drivers exceeding the speed limit. They were first introduced in the 1980s in London and have since been widely adopted to reduce traffic accidents. Speed cameras work by transmitting radar beams and using the Doppler effect to measure the change in frequency of the reflected beams, from which they can calculate a vehicle's speed. Modern speed cameras provide accurate speed readings even in rain and can simultaneously detect multiple vehicles. While controversial, studies show speed cameras are effective at reducing speeding and promoting road safety when paired with public awareness campaigns.
Speed detection using camera
This document summarizes how speed cameras detect vehicle speed using Doppler radar technology. Speed cameras transmit radar signals that bounce off vehicles and return to the camera. The difference in frequency of the transmitted and returned signals, known as the Doppler effect, allows the camera to calculate the vehicle's speed. Speed cameras were introduced in the 1990s and have been shown to reduce road accidents and casualties by deterring speeding. The document discusses how Doppler radar works, the basic components and principles of speed cameras, and their effectiveness even in poor weather conditions. It stresses the importance of public awareness about how speed cameras promote road safety.
speed detection speed camera
This document discusses speed cameras. It begins with an introduction and then describes the basic principles of speed cameras including Doppler effect. It discusses different types of speed cameras like Gastometer, peak traffic, and SPECS cameras. It explains how speed cameras use radar or lidar with Doppler effect to detect vehicle speed. Speed cameras have applications in traffic control, crime control, and reducing accidents. The document concludes stating that speed cameras can reduce accidents by 40% if used widely.
Speed detection-of-moving-vehicle-using-speed-cameras
Speed detection-of-moving-vehicle-using-speed-cameras IS A WAY OF TRAFFIC RULE IMPLETENTION USING VISUAL CAMERA TECHNOLOGY
Speed Detecting Camera by Kandarp Tiwari
This document is a seminar report on speed detecting cameras submitted by a student named Kandarp Kumar Tiwari. It discusses the history and purpose of speed cameras, introducing the Doppler effect principle that speed cameras use to detect vehicle speeds. It describes the basic architecture of speed cameras and examines factors like their ability to operate in rain, their measurement range, reaction time and ability to discriminate targets. The report also covers advantages, future technologies and concludes that speed cameras help enforce speed limits and reduce accidents.
Speed Detection Of Moving Vehicles (Using Traffic Enforcement Camera)
This document discusses traffic enforcement cameras, also known as speed cameras. It begins by introducing the purpose of using speed cameras to reduce traffic violations and enforce speed limits. It then provides details on the types of cameras, including fixed cameras mounted on poles or over roads, mobile cameras, and average speed cameras that calculate a vehicle's speed over a distance. The document discusses the technology behind automatic license plate recognition and how average speed cameras systems work. It concludes by noting that while speed cameras help enforce safety, some drivers try to avoid or evade them, though most of these attempts are illegal.
Speed camera
Speed cameras use radar or LIDAR to detect the speed of passing vehicles and photograph license plates. They operate using the Doppler effect, where the frequency of returned waves is higher if the object is moving towards the source. The first speed cameras were introduced in the Netherlands in the 1950s and London in 1992. Common types include Gatso speed cameras using radar, and newer models can track vehicles across multiple camera locations. While speed cameras reduce accidents and save lives, some criticize that they don't address the main causes of crashes and can induce sudden braking. Future technologies may allow cameras to detect non-use of seatbelts and issue tickets for other infractions.
speed detection camera
This document discusses speed detection cameras and how they measure vehicle speed using Doppler radar. It explains that speed detection cameras use Doppler radar to emit radio waves that bounce off vehicles and return to the camera. By analyzing changes in the frequency of the returned waves compared to what was emitted, due to the Doppler effect, the camera can calculate a vehicle's speed. It also describes that speed detection cameras use day/night cameras to record views of surroundings and vehicle license plates to identify speeding vehicles. The document aims to explain how speed detection cameras work and their purpose of enhancing road safety by limiting speeding and reducing accidents.
Smart accident detector and intimator [autosaved]
detects vehicles and other obstacles coming from any direction,also alerts the person ,and sends the gps location to the mentioned numbers
Automatic vehicle accident detection and messaging system using gsm and gps m...
This document summarizes an automatic vehicle accident detection and messaging system using GSM and GPS technology. The system uses a microcontroller, GSM modem, and GPS modem to detect if an accident occurs and send an SMS message with the vehicle's location to alert contacts. Some key advantages are providing security while traveling by detecting accident locations and notifying others. The system could also be expanded to track stolen vehicles or interface with other vehicle security systems.
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
This document describes a vehicle accident detection and tracking system using GPS, GSM, and MEMS sensors. The system detects accidents using a MEMS sensor and then uses GPS to determine the vehicle's location. The location is sent via GSM to emergency services and authorized contacts to provide rapid response. The system aims to quickly locate accident sites and notify help in remote areas with limited communication infrastructure.
Vehicle to vehicle communication
Vehicle-to-vehicle (V2V) communication allows vehicles to communicate with each other using dedicated short-range communications to exchange safety and traffic information. It uses DSRC technology based on WiFi and GPS standards to share data like location, speed and braking status within a range of 1 km. V2V aims to reduce accidents by warning drivers of hazards, accidents, emergency vehicles and impending traffic light violations to improve road safety. Future developments may integrate V2V with autonomous driving technologies to allow automated hazard avoidance.
Vehicle accident detection and messaging system using GSM and arduino
The document describes a vehicle accident detection system that uses piezoelectric sensors to detect vibrations during an accident. When an accident is detected, an Arduino microcontroller connected to the sensors triggers a GSM module to send notification messages to authorized users. It also triggers a buzzer to alert people nearby. The system is intended to help reduce the number of deaths from road accidents.
Automatic speed controller in real time vehicles.
One third of the number of fatal or serious accidents are associated with excessive or inappropriate speed, as well as changes in the roadway. So to overcome this problem we are introducing a automatic speed controller in vehicles at schools, hospitals and danger zones. In this zones, the vehicles are not possible to move above the predefined speed limit. It is basically a Mechatronics system. Ie it is a combination of both mechanical and electronics system.
Electronics project presentation
This is a project presentation for our electronics lab .The name of our project is cell phone detector.
Vehicle tracking system using GSM and GPS
It is not a fully descriptive presentation but, it can help you to survive in urgency. Schematic is copied. It's just a ppt.
Embedded based car parking system
This document presents a project on an embedded-based advanced car parking system developed by students at Bangalore Institute of Technology. The system allows users to reserve parking slots via SMS and guides cars to available slots. It uses sensors to detect vacant spots, a microcontroller to process reservations and a GSM modem for SMS communication. The system aims to reduce traffic and parking issues compared to manual systems through automated reservation and guidance. It has potential applications in malls, harbors and airports to better manage vehicle parking.
ACCIDENT REPORTING SYSTEM USING MEMS
This document presents an accident reporting system using a MEM sensor that can detect vehicle accidents and send alerts. The system includes a MEM sensor to detect vibrations during accidents, an LPC2148 microcontroller, a GSM module to send SMS alerts, a GPS module to locate the accident site, and an LCD display. When an accident occurs, the MEM sensor detects it and the microcontroller activates the GSM module to send an SMS with the accident location from the GPS module to emergency services. This allows for faster emergency response times and treatment for victims. The system aims to reduce accident response times and property and life losses.
Driver DrowsiNess System
The document describes a driver drowsiness detection system that uses image processing and machine learning techniques. The system monitors a driver's eyes for blinking over 1 second to detect drowsiness, then triggers an alert to wake the driver. Such a system could help reduce the number of accidents caused by drowsy driving by alerting drivers when they show signs of fatigue. The system captures the driver's face, recognizes the eyes, detects blinking, and sounds an alarm if drowsiness is detected.
IoT Solution To Regulate Vehicular Traffic
In this presentation, Swetha presents an innovative solution that aims to solve traffic problems in the country. Her solution uses sensors to collect information and relay the information to users over a mobile app.
Railway Accident Avoiding System: A Safety Measure
The focus of the Indian Railways is to increase capacity utilization of existing assets including rolling stock, track infrastructure, traction power and signalling & telecommunications. By running more high speed trains on the existing infrastructure, passengers and freight carrying capacity as well as revenue and profitability can be increased. In order to ensure safety over high speed and high density rail networks of Indian Railways it is the need of the hour to implement Automatic Train Protection (ATP) system such as Train Collision Avoidance System (TCAS). Indian Railways have taken up indigenous development of Train Collision Avoidance System (TCAS) through Research Designs & Standards Organization (RDSO) to prevent dangerous train collisions caused due to human errors or limitations and equipment failures by providing additional layer of enhanced safety in the operations.
Alcohol detection system with gsm and gps (fiem , ece)
This document presents an alcohol detection and monitoring system with engine locking that is designed to reduce drunk driving accidents. The system uses an alcohol sensor to detect alcohol levels in a driver's breath and will send a signal to a microcontroller to stop the engine and trigger an alarm if alcohol is detected. It also uses a GPS module to track the vehicle's location and a GSM module to send a message with the location to local authorities. The system is intended to automatically detect drunk driving and alert authorities in order to improve road safety.
Real Time Vehicle Monitoring Using Raspberry Pi
An advanced vehicle monitoring and tracking system based on Embedded Linux Board and android application is designed and implemented for monitoring the school vehicle from any location A to location B at real time. The proposed system would make good use of new technology that based on Embedded Linux board namely Raspberry Pi and Smartphone android application. The proposed system works on GPS/GPRS/GSM SIM900A Module which includes all the three things namely GPS GPRS GSM. The GPS current location of the vehicle; GPRS sends the tracking information to the server and the GSM is used for sending alert message to vehicle’s owner mobile. The proposed system would place inside the vehicle whose position is to be determined on the web page and monitored at real time. In the proposed system, there is comparison between the current vehicle path and already specified path into the file system of raspberry pi. Here in the proposed system the already specified path inside the raspberry pi’s file system taken from vehicle owner’s android smartphone using android application. Means the selection of path from location A to B takes place from vehicle owner’s android application which gives more safety and secures traveling to the traveler. Hence the driver drives the vehicle only on the vehicle owner’s specified path. If the driver drives the vehicle on the wrong path then the alert message will be sent from the proposed system to the vehicle’s owner mobile and also speakers alert driven using Raspberry pi’s audio jack. If the vehicle’s speed goes beyond the specified value of the speed, then also the warning message will be sent from system to the owner mobile. The proposed system also took care of the traveler’s safety by using LPG Gas leakage sensor MQ6 and temperature sensor DS18B20.
Vehicle Over Speed Detection on Highways
While driving on highways, motorists should not exceed the maximum speed limit permitted for their vehicle. This speed checker will come handy for the highway traffic police as it will not only provide a digital display in accordance with a vehicle’s speed but also sound an alarm if the vehicle exceeds the permissible speed for the highway.
Vehicle to vehicle communication
This document discusses vehicle-to-vehicle communication (V2V) through wireless technologies. V2V allows vehicles within a quarter kilometer of each other to automatically detect their position and movements in order to anticipate hazards and avoid accidents. It works through short-range wireless protocols like IEEE 802.11 to quickly establish ad-hoc networks between nearby vehicles and share real-time location data. Potential applications include navigation assistance, traffic information, remote diagnostics, collision avoidance systems, and stolen vehicle tracking. The document also reviews technologies involved like GPS, Bluetooth, ZigBee, and Ultra Wideband.
Intelligent traffic information and control system
This document proposes an intelligent traffic information and control system that uses image processing and wireless communication to control traffic lights. A camera at intersections will capture images and detect vehicle presence to adjust light durations accordingly. An emergency vehicle clearance system will turn all lights green on its path. Zigbee modules allow wireless communication between an ambulance and traffic controller. Additionally, a traffic management system and chatbot provide traffic information to users. The system will use incremental development, initially controlling lights with Arduino then adding congestion control with image processing.
ppt on accident detection system based on Iot
The document describes a proposed system to detect accidents on highways using an Internet of Things (IoT) approach. The system would use wireless sensor networks deployed along highways to detect accidents. Sensors would detect accidents and transmit location data via protocols like Zigbee to a gateway. The gateway would send the data to the cloud to be accessed by an Android app, allowing users to see accident locations in real-time. The document reviews related work on IoT and wireless sensor networks for smart cities and transportation. It outlines the proposed system architecture, hardware components, and communication methods to realize the accident detection system.
EYE BLINK SENSOR TO CONTROL ACCIDENTPpt main
This document describes a project to prevent vehicle accidents by detecting a driver's eye blinks using an IR sensor. If the sensor detects no eye blinks for a set time, indicating potential drowsiness, it will send a signal via RF to receivers in the vehicle to stop the motor and alert emergency services. The system uses a microcontroller, eye blink sensor, RF transmitter and receiver, motor driver, and other components. It aims to reduce accidents caused by drowsy or intoxicated driving. Possible extensions include adding alcohol detection to also stop the vehicle if the driver is intoxicated.
Speed checkers for highways
This document describes a speed checker device for highways that uses lasers and light dependent resistors (LDRs) to detect the speed of passing vehicles and display their speed digitally. If a vehicle exceeds the maximum permitted speed, the device will sound an alarm. It provides the block diagram, components used, operating principles, and potential applications and future developments of the speed checker to enhance safety on highways.
Vehicle Speed detecter By PRAGYA AGARWAL
The project mentioned here is “Speed checker and over speed detector for Highways”. This project is designed and developed by taking into consideration the problem mentioned above. We have used two sensors in this project. These sensors detect the vehicle speed. Condition is that, the two sensors should be installed at a distance of 100 meteres apart from one another.
Now-a-days we hear news about accidents on Highways very frequently. And in most of the cases main reason of accident is overspeed. Although all highways do have signboards indicating maximum speed limit for the sake of driver’s safety, but still people does not obey highway speed limit.
More Related Content
What's hot
Smart accident detector and intimator [autosaved]
detects vehicles and other obstacles coming from any direction,also alerts the person ,and sends the gps location to the mentioned numbers
Automatic vehicle accident detection and messaging system using gsm and gps m...
This document summarizes an automatic vehicle accident detection and messaging system using GSM and GPS technology. The system uses a microcontroller, GSM modem, and GPS modem to detect if an accident occurs and send an SMS message with the vehicle's location to alert contacts. Some key advantages are providing security while traveling by detecting accident locations and notifying others. The system could also be expanded to track stolen vehicles or interface with other vehicle security systems.
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
This document describes a vehicle accident detection and tracking system using GPS, GSM, and MEMS sensors. The system detects accidents using a MEMS sensor and then uses GPS to determine the vehicle's location. The location is sent via GSM to emergency services and authorized contacts to provide rapid response. The system aims to quickly locate accident sites and notify help in remote areas with limited communication infrastructure.
Vehicle to vehicle communication
Vehicle-to-vehicle (V2V) communication allows vehicles to communicate with each other using dedicated short-range communications to exchange safety and traffic information. It uses DSRC technology based on WiFi and GPS standards to share data like location, speed and braking status within a range of 1 km. V2V aims to reduce accidents by warning drivers of hazards, accidents, emergency vehicles and impending traffic light violations to improve road safety. Future developments may integrate V2V with autonomous driving technologies to allow automated hazard avoidance.
Vehicle accident detection and messaging system using GSM and arduino
The document describes a vehicle accident detection system that uses piezoelectric sensors to detect vibrations during an accident. When an accident is detected, an Arduino microcontroller connected to the sensors triggers a GSM module to send notification messages to authorized users. It also triggers a buzzer to alert people nearby. The system is intended to help reduce the number of deaths from road accidents.
Automatic speed controller in real time vehicles.
One third of the number of fatal or serious accidents are associated with excessive or inappropriate speed, as well as changes in the roadway. So to overcome this problem we are introducing a automatic speed controller in vehicles at schools, hospitals and danger zones. In this zones, the vehicles are not possible to move above the predefined speed limit. It is basically a Mechatronics system. Ie it is a combination of both mechanical and electronics system.
Electronics project presentation
This is a project presentation for our electronics lab .The name of our project is cell phone detector.
Vehicle tracking system using GSM and GPS
It is not a fully descriptive presentation but, it can help you to survive in urgency. Schematic is copied. It's just a ppt.
Embedded based car parking system
This document presents a project on an embedded-based advanced car parking system developed by students at Bangalore Institute of Technology. The system allows users to reserve parking slots via SMS and guides cars to available slots. It uses sensors to detect vacant spots, a microcontroller to process reservations and a GSM modem for SMS communication. The system aims to reduce traffic and parking issues compared to manual systems through automated reservation and guidance. It has potential applications in malls, harbors and airports to better manage vehicle parking.
ACCIDENT REPORTING SYSTEM USING MEMS
This document presents an accident reporting system using a MEM sensor that can detect vehicle accidents and send alerts. The system includes a MEM sensor to detect vibrations during accidents, an LPC2148 microcontroller, a GSM module to send SMS alerts, a GPS module to locate the accident site, and an LCD display. When an accident occurs, the MEM sensor detects it and the microcontroller activates the GSM module to send an SMS with the accident location from the GPS module to emergency services. This allows for faster emergency response times and treatment for victims. The system aims to reduce accident response times and property and life losses.
Driver DrowsiNess System
The document describes a driver drowsiness detection system that uses image processing and machine learning techniques. The system monitors a driver's eyes for blinking over 1 second to detect drowsiness, then triggers an alert to wake the driver. Such a system could help reduce the number of accidents caused by drowsy driving by alerting drivers when they show signs of fatigue. The system captures the driver's face, recognizes the eyes, detects blinking, and sounds an alarm if drowsiness is detected.
IoT Solution To Regulate Vehicular Traffic
In this presentation, Swetha presents an innovative solution that aims to solve traffic problems in the country. Her solution uses sensors to collect information and relay the information to users over a mobile app.
Railway Accident Avoiding System: A Safety Measure
The focus of the Indian Railways is to increase capacity utilization of existing assets including rolling stock, track infrastructure, traction power and signalling & telecommunications. By running more high speed trains on the existing infrastructure, passengers and freight carrying capacity as well as revenue and profitability can be increased. In order to ensure safety over high speed and high density rail networks of Indian Railways it is the need of the hour to implement Automatic Train Protection (ATP) system such as Train Collision Avoidance System (TCAS). Indian Railways have taken up indigenous development of Train Collision Avoidance System (TCAS) through Research Designs & Standards Organization (RDSO) to prevent dangerous train collisions caused due to human errors or limitations and equipment failures by providing additional layer of enhanced safety in the operations.
Alcohol detection system with gsm and gps (fiem , ece)
This document presents an alcohol detection and monitoring system with engine locking that is designed to reduce drunk driving accidents. The system uses an alcohol sensor to detect alcohol levels in a driver's breath and will send a signal to a microcontroller to stop the engine and trigger an alarm if alcohol is detected. It also uses a GPS module to track the vehicle's location and a GSM module to send a message with the location to local authorities. The system is intended to automatically detect drunk driving and alert authorities in order to improve road safety.
Real Time Vehicle Monitoring Using Raspberry Pi
An advanced vehicle monitoring and tracking system based on Embedded Linux Board and android application is designed and implemented for monitoring the school vehicle from any location A to location B at real time. The proposed system would make good use of new technology that based on Embedded Linux board namely Raspberry Pi and Smartphone android application. The proposed system works on GPS/GPRS/GSM SIM900A Module which includes all the three things namely GPS GPRS GSM. The GPS current location of the vehicle; GPRS sends the tracking information to the server and the GSM is used for sending alert message to vehicle’s owner mobile. The proposed system would place inside the vehicle whose position is to be determined on the web page and monitored at real time. In the proposed system, there is comparison between the current vehicle path and already specified path into the file system of raspberry pi. Here in the proposed system the already specified path inside the raspberry pi’s file system taken from vehicle owner’s android smartphone using android application. Means the selection of path from location A to B takes place from vehicle owner’s android application which gives more safety and secures traveling to the traveler. Hence the driver drives the vehicle only on the vehicle owner’s specified path. If the driver drives the vehicle on the wrong path then the alert message will be sent from the proposed system to the vehicle’s owner mobile and also speakers alert driven using Raspberry pi’s audio jack. If the vehicle’s speed goes beyond the specified value of the speed, then also the warning message will be sent from system to the owner mobile. The proposed system also took care of the traveler’s safety by using LPG Gas leakage sensor MQ6 and temperature sensor DS18B20.
Vehicle Over Speed Detection on Highways
While driving on highways, motorists should not exceed the maximum speed limit permitted for their vehicle. This speed checker will come handy for the highway traffic police as it will not only provide a digital display in accordance with a vehicle’s speed but also sound an alarm if the vehicle exceeds the permissible speed for the highway.
Vehicle to vehicle communication
This document discusses vehicle-to-vehicle communication (V2V) through wireless technologies. V2V allows vehicles within a quarter kilometer of each other to automatically detect their position and movements in order to anticipate hazards and avoid accidents. It works through short-range wireless protocols like IEEE 802.11 to quickly establish ad-hoc networks between nearby vehicles and share real-time location data. Potential applications include navigation assistance, traffic information, remote diagnostics, collision avoidance systems, and stolen vehicle tracking. The document also reviews technologies involved like GPS, Bluetooth, ZigBee, and Ultra Wideband.
Intelligent traffic information and control system
This document proposes an intelligent traffic information and control system that uses image processing and wireless communication to control traffic lights. A camera at intersections will capture images and detect vehicle presence to adjust light durations accordingly. An emergency vehicle clearance system will turn all lights green on its path. Zigbee modules allow wireless communication between an ambulance and traffic controller. Additionally, a traffic management system and chatbot provide traffic information to users. The system will use incremental development, initially controlling lights with Arduino then adding congestion control with image processing.
ppt on accident detection system based on Iot
The document describes a proposed system to detect accidents on highways using an Internet of Things (IoT) approach. The system would use wireless sensor networks deployed along highways to detect accidents. Sensors would detect accidents and transmit location data via protocols like Zigbee to a gateway. The gateway would send the data to the cloud to be accessed by an Android app, allowing users to see accident locations in real-time. The document reviews related work on IoT and wireless sensor networks for smart cities and transportation. It outlines the proposed system architecture, hardware components, and communication methods to realize the accident detection system.
EYE BLINK SENSOR TO CONTROL ACCIDENTPpt main
This document describes a project to prevent vehicle accidents by detecting a driver's eye blinks using an IR sensor. If the sensor detects no eye blinks for a set time, indicating potential drowsiness, it will send a signal via RF to receivers in the vehicle to stop the motor and alert emergency services. The system uses a microcontroller, eye blink sensor, RF transmitter and receiver, motor driver, and other components. It aims to reduce accidents caused by drowsy or intoxicated driving. Possible extensions include adding alcohol detection to also stop the vehicle if the driver is intoxicated.
What's hot (20)
Automatic vehicle accident detection and messaging system using gsm and gps m...
Automatic vehicle accident detection and messaging system using gsm and gps m...
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
Vehicle accident detection and messaging system using GSM and arduino
Vehicle accident detection and messaging system using GSM and arduino
Railway Accident Avoiding System: A Safety Measure
Railway Accident Avoiding System: A Safety Measure
Alcohol detection system with gsm and gps (fiem , ece)
Alcohol detection system with gsm and gps (fiem , ece)
Intelligent traffic information and control system
Intelligent traffic information and control system
Viewers also liked
Speed checkers for highways
This document describes a speed checker device for highways that uses lasers and light dependent resistors (LDRs) to detect the speed of passing vehicles and display their speed digitally. If a vehicle exceeds the maximum permitted speed, the device will sound an alarm. It provides the block diagram, components used, operating principles, and potential applications and future developments of the speed checker to enhance safety on highways.
Vehicle Speed detecter By PRAGYA AGARWAL
The project mentioned here is “Speed checker and over speed detector for Highways”. This project is designed and developed by taking into consideration the problem mentioned above. We have used two sensors in this project. These sensors detect the vehicle speed. Condition is that, the two sensors should be installed at a distance of 100 meteres apart from one another.
Now-a-days we hear news about accidents on Highways very frequently. And in most of the cases main reason of accident is overspeed. Although all highways do have signboards indicating maximum speed limit for the sake of driver’s safety, but still people does not obey highway speed limit.
Technical seminor
This document presents information on speed detection of moving vehicles using speed cameras. It discusses how radar and the Doppler effect are used to detect vehicle speed. Different types of speed cameras are described, including how they work and their key features. The document concludes that speed cameras have been shown to significantly reduce road accidents by discouraging speeding.
Speed checker on highway using 8051
Speed checker on highway using 8051 micro controller and IR sensors. Here IR sensor sense the speed of the vehicle and and controller display the speed on Liquid Crystal Display,
Speed cameras ppt full ...
There are many different factors that lead to traffic collisions and casualties….
The main reason is………..
SPEED OF VEHICLES
GeoVision : Integration Solutions : CCTV and Access Control Monitor Entry or ...
This document provides instructions for using a GV-PTZ010D, GV-PT110D, or GV-IP Speed Dome camera to monitor entry and exit points when connected to a GV-AS400 or GV-AS100 controller. The hardware is installed by connecting the camera's input terminal to an output on the controller. Preset points are configured on the camera to point at the entry/exit and a return view. The controller's output is configured for a door, and the camera's input is set to trigger movement to the entry/exit preset when activated and then return to the second preset after a specified duration.
Smart Grid Cyber Security
This document discusses the cyber security risks of smart grids and proposes an integrated security framework to address these risks. Smart grids integrate information infrastructure with electrical infrastructure, improving performance but also increasing vulnerability to cyber attacks. The framework features security agents, managed security switches, and a security manager to provide layered protection, intrusion detection, and access control across the power automation network in a scalable and extensible manner. This integrated approach is needed as power systems have different security needs than traditional IT networks.
Viewers also liked (7)
GeoVision : Integration Solutions : CCTV and Access Control Monitor Entry or ...
GeoVision : Integration Solutions : CCTV and Access Control Monitor Entry or ...
Similar to Speed Detection Camera
Real Time Road Blocker Detection and Distance Calculation for Autonomous Vehi...
Real Time Road Blocker Detection and Distance Calculation for Autonomous Vehi...Associate Professor in VSB Coimbatore
Statistics indicate that most road accidents occur due to a lack of time to react to instant traffic. This problem can be addressed with self-driving vehicles with the application of automated systems to detect such traffic events. The Autonomous Vehicle Navigation System (ATS) has been a standard in the Intelligent Transport System (ITS) and many Driver Assistance Systems (DAS) have been adopted to support these Advanced Autonomous Vehicles (IAVs). To develop these recognition systems for automated self-driving cars, it's important to monitor and operate in real-time traffic events. It requires the correct detection and response of traffic event an automated vehicle. In this paper proposed to develop such a system by applying image recognition to detect and respond to a road blocker by means of real-time distance measurement. To study the performance by measuring accuracy and precision of road blocker detection system and distance calculation, various experiments were conducted by using Shalom frame dataset and detection accuracy, precision of 99%, 100%, while distance calculation 97%, 99% has been achieved by this approach.Intelligent Transportation System
The document discusses Intelligent Transportation Systems (ITS). ITS uses advanced technologies like electronics, computers, communications and sensors to improve transportation safety and efficiency. It describes several ITS technologies like wireless communications, computational technologies, and sensing technologies. It also discusses ITS applications such as electronic toll collection, emergency notification, congestion pricing, automatic enforcement, collision avoidance and traveler information. Finally, it outlines benefits of ITS such as time savings, improved safety, reduced costs and emissions.
Adaptive cruise control edit1
Adaptive cruise control (ACC) uses radar and other sensors to detect vehicles ahead and maintain a safe following distance without requiring driver input. It works by detecting the distance and speed of other vehicles using radar and adjusting the vehicle's speed using the brake and throttle to keep a safe distance. Newer ACC systems fuse radar and camera sensors to better track vehicles. The controller processes sensor data and controls the engine or brakes. ACC allows more comfortable driving in traffic while increasing safety and fuel efficiency.
Smart Algorithm for Traffic Congestion and Control
This document presents a smart algorithm for traffic congestion control using video processing and RFID sensors. A camera installed at an intersection records live traffic density and counts vehicles in video frames. When the traffic density reaches a threshold, the traffic light signals are adjusted accordingly. RFID sensors and a reader are also used to identify vehicles that break traffic rules and go through red lights. The system aims to more intelligently control traffic lights based on real-time traffic conditions compared to traditional fixed-time systems, in order to reduce congestion and wasted time. It analyzes the literature on existing traffic management systems and the advantages of the proposed smart algorithm approach.
Wireless Rash Driving Detection System
This document describes a wireless rash driving detection system presented by Kamlesh B. Mishra. The system uses infrared sensors to detect vehicles and measure their speed. If a vehicle exceeds the speed limit, a buzzer alerts police at the location and control room. The system displays the vehicle's speed on a LCD and can send alerts to reduce accidents from rash driving. Potential applications are on highways and within campuses or company premises. The system could be improved through adding CCTV, voice alerts, and GSM technology to notify authorities.
Ijett v5 n1p108
This document describes a system for providing high speed indication and automatic braking in vehicles. It uses a solenoid valve and operational amplifier circuit to cut off the fuel supply to the engine when the vehicle's speed exceeds a set limit. When the speed limit is reached, a bulb glows and alarm sounds to warn the driver. If the driver does not slow down, the solenoid valve closes, cutting off the fuel and reducing the engine speed. The system aims to reduce road accidents caused by high speeds. It discusses the components used, including the engine, solenoid valve, speedometer, carburetor, op-amp IC, and indication panel.
Wireless Reporting System for Accident Detection at Higher Speeds
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
Seminar.1pptx
This document discusses various accident prevention systems for passenger vehicles. It begins by outlining the causes of road accidents such as distracted driving and speeding. It then describes four key accident prevention systems: 1) forward collision mitigation systems that detect imminent crashes and automatically apply brakes, 2) lane departure systems that track vehicle position and alert drivers if they leave their lane, 3) blind spot detection systems that monitor sides and rear of vehicles to warn of approaching vehicles, and 4) adaptive headlight systems that turn with steering to improve visibility. In conclusion, the document states that while these systems are currently only in luxury cars, they may be deployed more widely in the future to potentially save millions of lives.
Intelligent Transportation System
This document presents an overview of Intelligent Transportation Systems (ITS) by Thakkar Jayshiv M. It discusses problems with current transportation systems like traffic congestion and accidents. ITS uses technologies like GPS, electronic toll collection, and vehicle sensors to provide real-time traffic information and improve safety. The presentation covers various ITS applications, benefits like reduced congestion and costs, and challenges including high equipment costs. It concludes that implementing ITS can help solve India's growing transportation problems.
intelligent transportation system
transportation is the back bone of countries economical development. providing good and effective transportation facility will help in developing countries economy. transportation will save time, money, and work can be done easily. intelligent transportation system provides more benefits to the nation.
inter vehicular communication.pptx
Vehicular communication systems allow vehicles and roadside units to communicate with each other, exchanging information like safety warnings and traffic updates. Vehicles can communicate using infrared, VHF radio, Bluetooth, and millimeter waves. Bluetooth operates up to 80 meters at speeds below 80 km/h. Vehicle communications involve static identifying information as well as dynamic parameters like location, speed, direction. Information is also available through vehicle-to-roadside communication using the 63 GHz band, allowing drivers to access services while traveling. Potential applications include hazard warnings, electronic toll collection, and internet access via roadside beacons. Security challenges include message tampering, impersonation, and ensuring privacy while maintaining accountability.
Adaptive cruise control
adaptive cruise control is used to control speed of vehicle and is used to maintain the safe distance between two vehicle
LTC, Annual Forum, The Direction of Technology in Transportation, 05/13/2011,...
This document summarizes research on using intelligent transportation system (ITS) technologies to improve transportation efficiency, safety, and reduce emissions. Key points discussed include:
- Collecting real-time traffic and vehicle data through probe vehicles and sensors to analyze congestion and inform drivers.
- Developing dynamic eco-driving systems to provide drivers with real-time feedback on speed and routing to reduce fuel use and emissions.
- Exploring using signal timing data and vehicle coordination to optimize vehicle speeds on arterial roads and reduce wasted fuel at intersections.
- Creating eco-routing navigation tools to recommend routes minimizing energy use or emissions, not just time or distance.
Adaptive cruise control’
The document discusses adaptive cruise control (ACC) systems, which use sensors and controllers to maintain a safe distance from the vehicle ahead. It describes how ACC has evolved from conventional cruise control and now uses sensors like radar and LIDAR. ACC systems process sensor data to control braking and throttling. Cooperative ACC (CACC) allows vehicle-to-vehicle communication to coordinate speeds and braking more safely. While CACC promises increased safety and efficiency, its benefits require widespread adoption and it may encourage driver complacency. Researchers continue working to develop more advanced safety systems using sensors and vehicle communication.
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
This document describes a system that uses sensors installed in vehicles to detect obstacles and monitor pollution levels. The system uses an ultrasonic sensor to detect objects in front of the vehicle to avoid accidents. It also uses gas sensors to detect CO2 emitted from the vehicle. When obstacles are detected, the system automatically controls the vehicle speed to avoid collisions. The pollution levels are also monitored and notifications are sent if levels exceed standards. The system aims to reduce road accidents and monitor vehicle emissions using sensors and microcontrollers connected to the Internet of Things.
final.pptx
This document provides an overview of intelligent transportation systems (ITS). It discusses ITS technologies like wireless communications, sensors for vehicle detection, and video detection. It also outlines ITS applications such as electronic toll collection using FASTags, variable message signs, automatic road enforcement with cameras, and collision avoidance systems. The benefits of ITS are described as time savings, improved safety, reduced crashes and costs. Potential challenges are also noted around integration and high equipment/maintenance expenses.
Driverless car
Driverless vehicles use sensors, navigation, motion planning, and actuation to operate without human assistance. Sensors like cameras and lasers detect surroundings, navigation software guides the vehicle along a plotted route, motion planning algorithms determine safe movements around other objects, and actuation systems like brakes and steering execute the vehicle's movements. While the technology provides benefits like safety and increased road capacity, security issues around hacking pose risks if not properly addressed.
Embedded system-in-automobile
The document discusses embedded systems and their applications. It notes that embedded systems are controlled by microprocessors and use firmware. They are found in vehicles, medical devices, industrial systems, communications, and more. Adaptive cruise control is discussed as an example, using Doppler radar to maintain safe distances from other cars.
Speed
This document summarizes how speed cameras detect vehicle speed using Doppler radar technology. Speed cameras transmit radar signals that bounce off vehicles and return to the camera. The difference in frequency of the transmitted and returned signals, known as the Doppler effect, allows the camera to calculate the vehicle's speed. Speed cameras were introduced in the 1990s and have been shown to reduce road accidents and casualties by deterring speeding. The document discusses how Doppler radar works, the basic components and principles of speed cameras, and their effectiveness even in poor weather conditions. It stresses the importance of public awareness about how speed cameras are intended to improve road safety.
Intelligent Collision avoidance and monitoring system for railway using wirel...
In the current railway systems, it is becoming ever more necessary to have safety
elements in order to avoid accidents. One of the important causes that can provoke serious accidents
is the existence of obstacles on the tracks, either fixed or mobile. This project deals about one of the
efficient methods to avoid train collision and obstacle detection. A GPS system is being used to
pinpoint the location of faults on tracks. The project presents a solution, to provide an intelligent
train tracking and management system to improve the existing railway transport service. The solution
is based on powerful combination of mobile computing, Global System for Mobile Communication
(GSM), Global Positioning System (GPS) technologies and software. The inbuilt GPS module
identifies the train location with a highest accuracy and transfers the information to the central
system. The availability of the information allows the train Controller to take accurate decisions as
for the train location. Positioning data along with train speed helps the central system to identify the
possible safety issues and react to them effectively using the communication methods provided by
the system.
Similar to Speed Detection Camera (20)
Real Time Road Blocker Detection and Distance Calculation for Autonomous Vehi...
Real Time Road Blocker Detection and Distance Calculation for Autonomous Vehi...
Smart Algorithm for Traffic Congestion and Control
Smart Algorithm for Traffic Congestion and Control
Wireless Reporting System for Accident Detection at Higher Speeds
Wireless Reporting System for Accident Detection at Higher Speeds
LTC, Annual Forum, The Direction of Technology in Transportation, 05/13/2011,...
LTC, Annual Forum, The Direction of Technology in Transportation, 05/13/2011,...
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
Intelligent Collision avoidance and monitoring system for railway using wirel...
Intelligent Collision avoidance and monitoring system for railway using wirel...
More from Prashant Gajendra
BPUT MCA 5th Sem 2013
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
BPUT MCA 5th Sem 2014
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
BPUT MCA 2nd sem questions 2015
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
BPUT MCA 4th sem 2014
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
BPUT MCA First sem 2013
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
BPUT MCA 4th sem 2013
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
BPUT MCA 2nd sem 2014
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
BPUT MCA 2nd Semester 2013
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Bput mca 3rd semester 2013 question
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness and well-being.
BPUT MCA Third Sem Question 2014
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Cellular Communication Report
This document is a report submitted by Prashant Kumar Gajendra for his MCA 2nd semester seminar on cellular communication. It provides an acknowledgment thanking various sources of information and guidance. It includes an abstract describing an overview of cellular communication and GSM. It also includes various sections on the history, generations, components, and functions of cellular networks.
Java features
The document provides an introduction to the Java programming language. It discusses that Java was originally called Oak and developed by Sun Microsystems in 1991. It can be used to create both applications and applets. The source code is compiled into bytecode, which is then interpreted by the Java Virtual Machine (JVM) to execute programs. Key features of Java include being simple, secure, portable, object-oriented, robust, and multi-threaded. The document also covers concepts such as packages, interfaces, inheritance, method overloading/overriding, and multithreading.
Cellular communication
Cellular communication systems have evolved through multiple generations from analog 1G to digital 4G systems. A cellular network is divided into geographical areas called cells served by base transceiver stations. Cells are grouped into clusters where frequencies are reused to allow for more subscribers. When making a call, the cellular phone registers with the local base station which routes the call through switching centers to establish communication with the intended recipient. Modern cellular networks support additional services beyond voice like texting, internet access, and location tracking through technologies like GSM that employ protocols like TDMA for efficient frequency usage.
More from Prashant Gajendra (15)
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaRecently uploaded (20)
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Speed Detection Camera
- 1. Seminar On SPEED DETECTION CAMERA Prepared by : Prashant Kumar Gajendra Regd no. : 1305106016 (MCA 4th Semester) Guided By : Mrs. Swarnalata Pati Department of Computer Science & Application College of Engineering & Technology Biju Patnaik University of Technology
- 2. Contents Introduction Requirement Architecture Application Advantages Future Technology Conclusion
- 3. Introduction A speed camera is an automated ticketing machine that includes a camera mounted invariably behind road signs or trees. It is used to know the speed of a vehicle.
- 5. Why Speed Camera Control Vehicle Speed Traffic Control Crime Control Accident Control
- 6. Architecture Radar makes the use of electromagnetic waves to detect objects It gives the information about speed, distance, objects It uses Doppler’s Effect to determine the vehicle speed.
- 7. Doppler’s Effect The Doppler effect is the change in frequency of a wave for an observer moving relative to its source The principle of speed camera that is the Doppler's effect can be described by the formula
- 8. Doppler’s Effect f M = 2vfEcos(α/c) where fM if the frequency of the received signal v is the speed of vehicles f E if the frequency of transmitted signal α is the angle between the transmitted signal and path along which the vehicle travels c is propagation speed of the signal in the air.
- 10. Block Description The basic of every speed camera is a SHF generator, which can transmit the beams in specific directions.
- 11. Application
- 12. Advantages Speed Control of Vehicles Economic Benefit Tax for rich and passionate riders Good for Environment High speed is bad for communities
- 13. Future Technologies A speed camera designed to catch speeding motorist The asset camera should be able to pick out the drivers who are not wearing helmet Identify tailgating Can also note number plate and recognise cars with out-of-date tax and licence
- 14. Conclusion A new approach to vehicle extraction and speed detection was proposed These camera reduces accidents and protects the innocent road users The system also provides location and velocity information of each vehicle
- 15. Reference www.speedcamerauk.com www.halford.com www.strathcona.ca www.radarsdirect.com
- 16. Thank you Any Queries ? LIFE is more IMPORTANT than SPEED