The document discusses training requirements for spill prevention, control, and countermeasures (SPCC) plans under 40 CFR Part 112. It states that all personnel handling oil products must be trained annually on spill response procedures, facility operations, applicable regulations, and the site-specific SPCC plan. It also outlines requirements for designating an individual accountable for discharge prevention at each facility and conducting annual briefings on spills, equipment issues, and prevention measures.
The document provides an overview of spill prevention, control and countermeasures (SPCC) training at the Blue River Wastewater Treatment Plant. It discusses the goals and requirements of the SPCC rule, including preventing oil discharges, preparing and implementing an SPCC plan, general facility requirements, and personnel training. It also summarizes the Blue River plant's SPCC plan, which includes details on oil storage containers, secondary containment, and a facility diagram.
The document provides an overview of SPCC (Spill Prevention, Control and Countermeasure) training goals and requirements at Harvard University. It summarizes Harvard's SPCC plans, spill prevention procedures, roles and responsibilities, and spill response protocols. Facilities are required to inspect oil storage containers monthly and maintain accurate inventories. Personnel must receive SPCC training if handling oil. Incidental spills are cleaned immediately while non-incidental spills over 10 gallons must be reported to the Operations Center.
The document summarizes Berry College's SPCC (Spill Prevention, Control, and Countermeasure) Plan. The plan is required by the EPA to prevent oil discharges from reaching waterways and ensure effective response. It details Berry College's oil storage facilities and tanks, containment procedures, inspections, and emergency response protocols. The appendices provide facility diagrams, inspection checklists, and spill response guidelines. The plan aims to minimize potential spills through operating procedures, training, and immediate access to spill cleanup equipment and emergency contacts.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan, spill classifications as minor, intermediate or major, and spill response actions for each type of spill. For any spill, personnel should call emergency services, secure the site, stop and contain the spill if possible, and report the spill according to the requirements.
This document discusses health and safety in the oil and gas industry. It covers several topics:
- Management systems for health and safety with planning, performance, assessment, and improvement.
- Personal protective equipment (PPE) including responsibilities, hazard assessment, protective clothing, and training.
- Electrical safety including responsibilities, hazards, flash hazard analysis, and qualifications.
- Control of hazardous energy sources including lockout procedures.
- Emergency contingency planning including different plans for shelter in place, administrative closings, and occupant emergencies.
Oil Spill Prevention, Control & Countermeasure by Morehead State UniversityAtlantic Training, LLC.
The document outlines the requirements of the Oil Spill Prevention, Control and Countermeasure (SPCC) Rule. It summarizes that facilities storing over a certain amount of oil are required to have an SPCC Plan to prevent discharges to navigable waters. The Plan must address operating procedures, containment measures, response procedures, inspections, and identify a trained individual responsible for spill prevention. Morehead State University's SPCC Plan is then summarized, identifying its oil storage tanks, inspection procedures, and emergency response guidelines to comply with the Rule.
The document provides information about hydrogen sulfide (H2S) safety training. It defines H2S as a flammable and toxic gas that is colorless and heavier than air, with a rotten egg odor. It discusses where H2S can be found naturally and in industrial processes. The training covers the properties, detection, health effects at different concentrations, and protective equipment for H2S. It emphasizes that H2S can be deadly and proper safety precautions must be followed when in its presence.
The document provides an overview of spill prevention, control and countermeasures (SPCC) training at the Blue River Wastewater Treatment Plant. It discusses the goals and requirements of the SPCC rule, including preventing oil discharges, preparing and implementing an SPCC plan, general facility requirements, and personnel training. It also summarizes the Blue River plant's SPCC plan, which includes details on oil storage containers, secondary containment, and a facility diagram.
The document provides an overview of SPCC (Spill Prevention, Control and Countermeasure) training goals and requirements at Harvard University. It summarizes Harvard's SPCC plans, spill prevention procedures, roles and responsibilities, and spill response protocols. Facilities are required to inspect oil storage containers monthly and maintain accurate inventories. Personnel must receive SPCC training if handling oil. Incidental spills are cleaned immediately while non-incidental spills over 10 gallons must be reported to the Operations Center.
The document summarizes Berry College's SPCC (Spill Prevention, Control, and Countermeasure) Plan. The plan is required by the EPA to prevent oil discharges from reaching waterways and ensure effective response. It details Berry College's oil storage facilities and tanks, containment procedures, inspections, and emergency response protocols. The appendices provide facility diagrams, inspection checklists, and spill response guidelines. The plan aims to minimize potential spills through operating procedures, training, and immediate access to spill cleanup equipment and emergency contacts.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan, spill classifications as minor, intermediate or major, and spill response actions for each type of spill. For any spill, personnel should call emergency services, secure the site, stop and contain the spill if possible, and report the spill according to the requirements.
This document discusses health and safety in the oil and gas industry. It covers several topics:
- Management systems for health and safety with planning, performance, assessment, and improvement.
- Personal protective equipment (PPE) including responsibilities, hazard assessment, protective clothing, and training.
- Electrical safety including responsibilities, hazards, flash hazard analysis, and qualifications.
- Control of hazardous energy sources including lockout procedures.
- Emergency contingency planning including different plans for shelter in place, administrative closings, and occupant emergencies.
Oil Spill Prevention, Control & Countermeasure by Morehead State UniversityAtlantic Training, LLC.
The document outlines the requirements of the Oil Spill Prevention, Control and Countermeasure (SPCC) Rule. It summarizes that facilities storing over a certain amount of oil are required to have an SPCC Plan to prevent discharges to navigable waters. The Plan must address operating procedures, containment measures, response procedures, inspections, and identify a trained individual responsible for spill prevention. Morehead State University's SPCC Plan is then summarized, identifying its oil storage tanks, inspection procedures, and emergency response guidelines to comply with the Rule.
The document provides information about hydrogen sulfide (H2S) safety training. It defines H2S as a flammable and toxic gas that is colorless and heavier than air, with a rotten egg odor. It discusses where H2S can be found naturally and in industrial processes. The training covers the properties, detection, health effects at different concentrations, and protective equipment for H2S. It emphasizes that H2S can be deadly and proper safety precautions must be followed when in its presence.
This document provides an overview of a PETRONAS CARIGALI PTW (permit to work) system training. It introduces the trainer and asks attendees to provide their name and company. It then covers definitions related to PTW systems like area classification, hot work, cold work and confined spaces. It describes the purpose of a PTW system is to protect personnel, environment, assets and company reputation. It outlines when a PTW is applicable, the roles and responsibilities of PTW signatories, and the responsibilities of a permit applicant.
The document discusses the International Life-Saving Appliances (LSA) Code. It provides:
1) An overview of the LSA Code requirements for life-saving appliances on ships, including personal life-saving appliances, survival craft, and launching appliances.
2) Details on new requirements adopted by the IMO in 2011 and 2013 regarding on-load release hooks for lifeboats to improve safety. These include design criteria that must be met by existing and new on-load release and retrieval systems.
3) Amendments made to the LSA Code and testing recommendations in 2010 and 2012 regarding items like liferaft equipment, lifeboat certification, and carrying capacities.
Introduction ………………………………………………………………………….…….......04
1.1 Purpose and Objective……………………………………………………………..........04
1.2 Legislation and References………………………………………………………..........04
1.3 Scope & Project Details……………………………………………………………….…..04
1.4 Revisions…………………………………………..…………………………...……………05
2. Roles and Responsibilities…………………………………………………………….……..05
2.1 Person(s) Responsible for Ensuring Compliance with this Plan………….…......…….08
3. Strategy…………………………………………………………………………………….……..08
3.1 Procedure for the Implementation of the Strategy…………..…………….....……...09
3.1.1 Good Housekeeping, Waste Management & Waste Disposal………………09
3.1.2 Proper Use & Safe Guarding of Ignition Sources…...………………..……...10
3.1.2.1 Classification of Fire (Based On the Type of Materials Involved)………..13
3.1.3 Training………………………………………..………………………………….….15
3.1.4 Use of Fire Retardant Materials………………….………………………….…....15
3.1.5 Cable Management……….……………………………………………………...…16
3.1.6 Equipment Inspection and Maintenance…………………………………….....16
3.1.7 Permit To Work Systems – Emphasis on Strict implementation of Fire
Prevention & protection plan……………………………………………...…..…16
3.1.8 Portable Fire Extinguishers………………………………….………………….…16
4. Fire & Safety during Construction…………………………………………………………….19
5. Summary of Fire Protection Program…………………………………………………...……20
6. Fire Prevention, Control, Containment and Fire Fighting………….………………………20
7. Initial Notification Procedure…………………………………………………………………...21
8. Termination of Fire Threat……………….……………………………………………….…….22
9. Fire Action Summary (For Site and Offices)………………………………………………..22
10. Assembly Points and First Aid Facility……………………………….……………………23
Hydrogen sulfide is one of the most deadly industrial gases especially in oil and gas industry. It has been referred to as a silent killer. This comprehensive PPT covers a wide range of topics including characteristics of H2S, monitoring areas for H2S levels, emergency procedures, hazard minimization, contingency planning, and more. Complete and up-to-date. A great tool for required annual training.
The document discusses confined space entry hazards and safety requirements. It defines a confined space and lists common examples. Hazards include toxic gases, oxygen deficiency, engulfment and isolation. The document outlines procedures for hazard identification, atmospheric monitoring, entry permits, attendant and retrieval systems. It discusses reclassification of confined spaces and respiratory protection program requirements.
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
About Piper Alpha Platform
The Happening Event Timeline
Cause of the Disaster
Effect of the Disaster
Key Failures
Improvement and Prevention
Conclusion
This site induction presentation provides essential health and safety information for personnel working on an construction project to build a university building. It outlines the site location and operating hours, management team and emergency procedures, welfare facilities, site rules that must be followed, significant hazards, requirements for housekeeping, first aid and accident reporting, fire safety procedures, and types of fire extinguishers. The presentation emphasizes that attending induction and following all procedures are compulsory for all personnel working on the site.
This document outlines the requirements for chemical hazard communication and workers' right-to-know programs. It defines health and physical hazards and provides examples of different hazard categories like carcinogens, corrosives, flammables. The purpose is to inform workers of chemical hazards in their workplace. Employers must develop a written hazard communication program, maintain chemical inventories and labels, and provide training on material safety data sheets and methods to protect workers from routine and non-routine chemical exposure hazards.
Improper management of highly hazardous chemicals, including toxic, reactive or flammable liquids, can cause accidental releases and emergency responses. OSHA’s Process Safety Management of Highly Hazardous Chemicals standard (29 CFR 1910.119) regulates the management of highly hazardous chemicals. Violations can carry fines of up to $126,000. Do you have a PSM program in place?
Safe Chemical Handling & Initial Spill ResponseDavid Horowitz
This presentation was prepared for the Sixteenth Annual Southeastern Massachusetts Drinking Water Fair held on June 16, 2011 at the Massachusetts Maritime Academy. The event was hosted by the Barnstable County Water Utilities Association and the Plymouth County Water Works Association. Attendees received Training Contact Hours (TCHs).
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
The term Prestartup Safety Review (PSSR) first received prominence in the process industries with the introduction of the Process Safety Management (PSM) regulations.
The document provides an overview of process safety, outlining key differences from occupational safety. It describes process safety as involving the prevention of unintentional chemical releases that can seriously impact plants and the environment. The ten pillars of compliance for process safety management are then defined, including safety management systems, aging equipment, competence, safety instrumented systems, overfill prevention, containment, emergency response plans, performance indicators, and safety leadership. Major accidents that resulted from failures in management of change are also discussed.
The document discusses spill control and containment procedures for hazardous materials. It covers topics like identifying hazardous materials, establishing emergency response zones, and mitigation techniques. The key points are:
- Proper spill response includes identifying the spilled material, assessing the situation, determining mitigation methods, and implementing containment procedures.
- Three emergency response zones are established - a hot zone near the spill, a warm zone for personnel supporting containment, and a cold zone for command operations.
- Mitigation techniques include chemical and physical control methods. Physical control involves actions like diking, damming, diverting, and transferring spilled materials.
This document provides an overview of hydrogen sulfide (H2S) in oilfield operations. It discusses the physical and chemical properties of H2S, why it occurs, health effects at different exposure levels, and regulatory exposure limits. The document also summarizes American Petroleum Institute guidance and Bureau of Land Management regulations regarding H2S monitoring, warning systems, training, contingency planning, and public protection requirements for oil and gas operations that may encounter H2S.
The document discusses permit to work (PTW) procedures at an NGI training center. It defines what a PTW is, its purpose of ensuring work is planned and hazards identified, and that it is a legal document. It describes what types of work require a PTW, including hot work and cold work. It outlines the PTW process including initiation, authorization, cancellation. It defines roles and responsibilities of personnel involved in the PTW process. Finally, it discusses complementary permits that may be required for different types of work, such as electrical isolation or confined space entry.
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
This document provides information on the safe use, handling, and storage of compressed gases. It discusses regulations, properties of different types of gases, gas behavior, container markings, and emergency response. Key points covered include definitions of compressed, liquefied, and cryogenic gases; gas laws; hazard classifications; and regulations from organizations like OSHA, NFPA, and SDS. Color codes and markings are important for identifying gas types and ensuring safety.
The document discusses health and safety best practices for school laboratories, including identifying hazards, implementing engineering and administrative controls like proper ventilation and training, using personal protective equipment, complying with OSHA regulations, and properly handling chemical storage, waste disposal, and emergency situations. Maintaining a safe lab requires assessing hazards, having appropriate safety equipment and training procedures, and properly managing chemical inventory, storage, and disposal.
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...Atlantic Training, LLC.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan to address spill prevention, response, and reporting. It classifies spills as minor, intermediate, or major and describes the appropriate response actions for each. The document provides guidance on securing the site, removing the spill source, controlling and absorbing the spill, containerizing materials, reporting requirements, and protecting responders during a spill event. It emphasizes the importance of having a site-specific spill plan and standard operating procedures.
This document provides an overview of a PETRONAS CARIGALI PTW (permit to work) system training. It introduces the trainer and asks attendees to provide their name and company. It then covers definitions related to PTW systems like area classification, hot work, cold work and confined spaces. It describes the purpose of a PTW system is to protect personnel, environment, assets and company reputation. It outlines when a PTW is applicable, the roles and responsibilities of PTW signatories, and the responsibilities of a permit applicant.
The document discusses the International Life-Saving Appliances (LSA) Code. It provides:
1) An overview of the LSA Code requirements for life-saving appliances on ships, including personal life-saving appliances, survival craft, and launching appliances.
2) Details on new requirements adopted by the IMO in 2011 and 2013 regarding on-load release hooks for lifeboats to improve safety. These include design criteria that must be met by existing and new on-load release and retrieval systems.
3) Amendments made to the LSA Code and testing recommendations in 2010 and 2012 regarding items like liferaft equipment, lifeboat certification, and carrying capacities.
Introduction ………………………………………………………………………….…….......04
1.1 Purpose and Objective……………………………………………………………..........04
1.2 Legislation and References………………………………………………………..........04
1.3 Scope & Project Details……………………………………………………………….…..04
1.4 Revisions…………………………………………..…………………………...……………05
2. Roles and Responsibilities…………………………………………………………….……..05
2.1 Person(s) Responsible for Ensuring Compliance with this Plan………….…......…….08
3. Strategy…………………………………………………………………………………….……..08
3.1 Procedure for the Implementation of the Strategy…………..…………….....……...09
3.1.1 Good Housekeeping, Waste Management & Waste Disposal………………09
3.1.2 Proper Use & Safe Guarding of Ignition Sources…...………………..……...10
3.1.2.1 Classification of Fire (Based On the Type of Materials Involved)………..13
3.1.3 Training………………………………………..………………………………….….15
3.1.4 Use of Fire Retardant Materials………………….………………………….…....15
3.1.5 Cable Management……….……………………………………………………...…16
3.1.6 Equipment Inspection and Maintenance…………………………………….....16
3.1.7 Permit To Work Systems – Emphasis on Strict implementation of Fire
Prevention & protection plan……………………………………………...…..…16
3.1.8 Portable Fire Extinguishers………………………………….………………….…16
4. Fire & Safety during Construction…………………………………………………………….19
5. Summary of Fire Protection Program…………………………………………………...……20
6. Fire Prevention, Control, Containment and Fire Fighting………….………………………20
7. Initial Notification Procedure…………………………………………………………………...21
8. Termination of Fire Threat……………….……………………………………………….…….22
9. Fire Action Summary (For Site and Offices)………………………………………………..22
10. Assembly Points and First Aid Facility……………………………….……………………23
Hydrogen sulfide is one of the most deadly industrial gases especially in oil and gas industry. It has been referred to as a silent killer. This comprehensive PPT covers a wide range of topics including characteristics of H2S, monitoring areas for H2S levels, emergency procedures, hazard minimization, contingency planning, and more. Complete and up-to-date. A great tool for required annual training.
The document discusses confined space entry hazards and safety requirements. It defines a confined space and lists common examples. Hazards include toxic gases, oxygen deficiency, engulfment and isolation. The document outlines procedures for hazard identification, atmospheric monitoring, entry permits, attendant and retrieval systems. It discusses reclassification of confined spaces and respiratory protection program requirements.
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
About Piper Alpha Platform
The Happening Event Timeline
Cause of the Disaster
Effect of the Disaster
Key Failures
Improvement and Prevention
Conclusion
This site induction presentation provides essential health and safety information for personnel working on an construction project to build a university building. It outlines the site location and operating hours, management team and emergency procedures, welfare facilities, site rules that must be followed, significant hazards, requirements for housekeeping, first aid and accident reporting, fire safety procedures, and types of fire extinguishers. The presentation emphasizes that attending induction and following all procedures are compulsory for all personnel working on the site.
This document outlines the requirements for chemical hazard communication and workers' right-to-know programs. It defines health and physical hazards and provides examples of different hazard categories like carcinogens, corrosives, flammables. The purpose is to inform workers of chemical hazards in their workplace. Employers must develop a written hazard communication program, maintain chemical inventories and labels, and provide training on material safety data sheets and methods to protect workers from routine and non-routine chemical exposure hazards.
Improper management of highly hazardous chemicals, including toxic, reactive or flammable liquids, can cause accidental releases and emergency responses. OSHA’s Process Safety Management of Highly Hazardous Chemicals standard (29 CFR 1910.119) regulates the management of highly hazardous chemicals. Violations can carry fines of up to $126,000. Do you have a PSM program in place?
Safe Chemical Handling & Initial Spill ResponseDavid Horowitz
This presentation was prepared for the Sixteenth Annual Southeastern Massachusetts Drinking Water Fair held on June 16, 2011 at the Massachusetts Maritime Academy. The event was hosted by the Barnstable County Water Utilities Association and the Plymouth County Water Works Association. Attendees received Training Contact Hours (TCHs).
This document provides an introduction to health, safety and environmental issues in the oil and gas industry. It discusses why HSE is important given the high-risk nature of the work and potential for catastrophic accidents. Two examples of major accidents, the Piper Alpha platform explosion and Deepwater Horizon oil spill, are described to illustrate the risks. The document then covers hazard identification and risk assessment processes used in the industry. It provides examples of common hazards and approaches to controlling risks, including the use of engineering solutions, administrative controls and personal protective equipment. Training requirements for workers and definitions of key terms like incidents and near misses are also outlined.
The term Prestartup Safety Review (PSSR) first received prominence in the process industries with the introduction of the Process Safety Management (PSM) regulations.
The document provides an overview of process safety, outlining key differences from occupational safety. It describes process safety as involving the prevention of unintentional chemical releases that can seriously impact plants and the environment. The ten pillars of compliance for process safety management are then defined, including safety management systems, aging equipment, competence, safety instrumented systems, overfill prevention, containment, emergency response plans, performance indicators, and safety leadership. Major accidents that resulted from failures in management of change are also discussed.
The document discusses spill control and containment procedures for hazardous materials. It covers topics like identifying hazardous materials, establishing emergency response zones, and mitigation techniques. The key points are:
- Proper spill response includes identifying the spilled material, assessing the situation, determining mitigation methods, and implementing containment procedures.
- Three emergency response zones are established - a hot zone near the spill, a warm zone for personnel supporting containment, and a cold zone for command operations.
- Mitigation techniques include chemical and physical control methods. Physical control involves actions like diking, damming, diverting, and transferring spilled materials.
This document provides an overview of hydrogen sulfide (H2S) in oilfield operations. It discusses the physical and chemical properties of H2S, why it occurs, health effects at different exposure levels, and regulatory exposure limits. The document also summarizes American Petroleum Institute guidance and Bureau of Land Management regulations regarding H2S monitoring, warning systems, training, contingency planning, and public protection requirements for oil and gas operations that may encounter H2S.
The document discusses permit to work (PTW) procedures at an NGI training center. It defines what a PTW is, its purpose of ensuring work is planned and hazards identified, and that it is a legal document. It describes what types of work require a PTW, including hot work and cold work. It outlines the PTW process including initiation, authorization, cancellation. It defines roles and responsibilities of personnel involved in the PTW process. Finally, it discusses complementary permits that may be required for different types of work, such as electrical isolation or confined space entry.
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
This document provides information on the safe use, handling, and storage of compressed gases. It discusses regulations, properties of different types of gases, gas behavior, container markings, and emergency response. Key points covered include definitions of compressed, liquefied, and cryogenic gases; gas laws; hazard classifications; and regulations from organizations like OSHA, NFPA, and SDS. Color codes and markings are important for identifying gas types and ensuring safety.
The document discusses health and safety best practices for school laboratories, including identifying hazards, implementing engineering and administrative controls like proper ventilation and training, using personal protective equipment, complying with OSHA regulations, and properly handling chemical storage, waste disposal, and emergency situations. Maintaining a safe lab requires assessing hazards, having appropriate safety equipment and training procedures, and properly managing chemical inventory, storage, and disposal.
Spill Prevention & Response Training by Fort Wainwright The Environmental Div...Atlantic Training, LLC.
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan to address spill prevention, response, and reporting. It classifies spills as minor, intermediate, or major and describes the appropriate response actions for each. The document provides guidance on securing the site, removing the spill source, controlling and absorbing the spill, containerizing materials, reporting requirements, and protecting responders during a spill event. It emphasizes the importance of having a site-specific spill plan and standard operating procedures.
The document outlines regulatory requirements and best practices for spill prevention, control, and emergency response. It discusses using proper containers and storage, training, and secondary containment to prevent spills. Emergency response plans should establish personnel roles, communication, and procedures for evacuation, decontamination, and medical treatment. The spill response leader is responsible for overall command and coordination with authorities, and must be clearly designated in the written plan. Post-incident evaluation includes determining the cause and lessons learned.
This document outlines protocols for responding to chemical spills. It discusses hazard awareness and preparation, including having necessary emergency equipment, knowledge of emergency procedures, and spill kits. It provides guidance on responding to minor spills, which can be cleaned up with available supplies, and major spills, which require evacuating the area and contacting authorities. The document also discusses spill prevention best practices like avoiding clutter and only having necessary chemicals available.
This document provides information on hazardous materials training. It defines hazardous materials and explains that they are divided into 9 classes based on their properties, such as explosives, flammable gases and liquids, oxidizers, and corrosives. It also discusses labeling and placarding requirements, security plans, criminal penalties, and training requirements for shippers and transporters of hazardous materials.
The Solano County Department of Environmental Management regulates hazardous materials through six programs: hazardous materials management, underground storage tanks, hazardous waste, risk management, aboveground storage tanks, and business plans and inventories. The department ensures compliance with state laws and regulations through permitting, inspections, enforcement, emergency response, and education. Common violations addressed include inadequate labeling, monitoring and record keeping for underground fuel tanks, improper hazardous waste handling, and missing or insufficient business plans for hazardous materials. The department provides technical assistance and coordinates emergency response to protect public health and the environment.
This document provides an overview of hazardous materials awareness training. It discusses acknowledging those involved in developing the training, the scope of the training which is for first responders to recognize and notify authorities of hazardous material releases, safety guidelines for responding including approaching upwind and isolating the area. It also covers legislative requirements for training, OSHA response levels including awareness, operational and technician levels, and consensus standards from NFPA for hazardous materials response training and competencies.
This document provides an overview of hazardous materials awareness training. It discusses key topics like the OSHA Hazard Communication Standard, the Globally Harmonized System for classifying and labeling chemicals, the EPA's Worker Protection Standard, and the NFPA standards for hazardous materials responders. The main sections cover defining hazardous materials, recognizing common classes of hazards using DOT labeling systems, and requirements for awareness level responders to identify hazards and notify authorities.
Hazardous Materials Safety by The International Trade Association of Greater ...Atlantic Training, LLC.
The document discusses hazardous materials (HazMat) safety regulations. It notes that the DOT HazMat regulations apply to all aspects of transporting hazardous materials and are enforced by several agencies. The regulations include requirements for training, classification and identification of HazMat, protective packaging, hazard communication, incident reporting, and security plans for transporting certain materials. Compliance with all the regulations, including proper employee training, helps prevent hazardous materials incidents.
The document provides an overview of the goals and competencies required of hazardous materials technicians. It outlines that technicians must be trained to the awareness and operational levels and have additional skills including analyzing incidents, identifying containers and their contents, monitoring for hazards, and collecting hazard and response information. The document describes various chemical, toxicological, and radiological terms and their significance in risk assessment. It also lists the steps for analyzing unknown materials and identifying monitoring equipment used to determine different hazards.
This training presentation provides an overview of various workplace safety topics including hazard communication, personal protective equipment, respiratory protection, hazard analysis, lockout/tagout procedures, confined space entry, fire safety, and first aid. It reviews important concepts, definitions, and best practices for each topic to help create and maintain safe working conditions. Slide decks provide detailed information on specific issues like chemical hazards, respirator selection and use, fall protection systems, and heat and cold stress prevention. The goal is to give attendees a well-rounded safety orientation through concise training modules tailored to their industry.
This new employee safety orientation covers workplace hazards and safety procedures for a college. It aims to help employees stay safe by understanding their role in safety, knowing how to report hazards, following safety rules, avoiding hazards and injuries, and responding properly in emergencies. The orientation reviews slip/fall prevention, lifting safely, fire safety, evacuation procedures, and reporting injuries. The overall goal is to provide a safe workplace for all faculty, students, employees and visitors.
This document provides an overview of hazardous materials regulations training requirements. It discusses the regulatory bodies that govern hazardous materials transportation, including OSHA, DOT, EPA, and NFPA. It outlines the jurisdictions of OSHA and DOT, with DOT having jurisdiction over in-transit operations and loading/unloading, while OSHA covers workplace safety. The training will focus on DOT but also cover OSHA and EPA requirements. It will review hazard classes, the hazardous materials table, shipping papers, placarding, and emergency response procedures to help prevent accidents involving hazardous materials transported.
This document discusses slips, trips, and falls, including causes and prevention. It notes that slips, trips, and falls account for most general industry accidents and cause thousands of emergency room visits annually. Causes include unsafe conditions like clutter, spills, poor lighting, and unsafe behaviors like rushing or improper footwear. Prevention involves recognizing hazards, evaluating risks, and implementing controls. Controls include improving housekeeping, lighting, slip-resistant surfaces, training safe behaviors, and using handrails and fall protection equipment. The key messages are that slips, trips and falls are preventable, but it requires vigilance, planning safe work practices, and taking personal responsibility for safety.
Slips, trips, and falls are a major cause of workplace injuries. Proper prevention techniques include good housekeeping to clean spills and remove obstacles, using the right footwear for the environment, and being aware of behaviors like rushing or distractions that can lead to falls. Fall protection devices should be used for work at heights from ladders, platforms, or other elevated surfaces. Following safety practices and policies can significantly reduce injuries from slips, trips, and falls.
Preventing Slips, Trips and Falls in the Health Care Industry by GTRIAtlantic Training, LLC.
Slips, trips, and falls are a major cause of injuries among healthcare workers. Common causes include floor contaminants from water or other liquids, poor drainage, surface irregularities, and tripping hazards. Solutions involve implementing housekeeping procedures to keep floors dry and clear, maintaining good drainage, promptly addressing issues like warped flooring or damaged stairs, using non-slip footwear and flooring, and training workers on safety practices and proper equipment use. Regular inspections and reviewing incident data can help identify hazards and ensure safety protocols are followed to reduce injuries over time.
This document provides information on slip, trip, and fall hazards with a focus on ladder safety. It discusses OSHA's emphasis program on fall hazards from ladders and the importance of preventing slip, trip, and fall hazards. Specific tips are provided for ladder safety, including choosing the right ladder, setting it up at the proper angle, inspecting ladders for defects, climbing with three points of contact, and securing ladders on uneven or slippery surfaces. Maintaining proper lighting and housekeeping to prevent hazards on walking surfaces are also covered.
This document discusses preventing slips, trips, and falls in the workplace. It states that slips, trips, and falls account for over 20% of workplace injuries and 10% of fatal workplace injuries. Common causes include wet floors, loose objects, and unsafe behaviors. It provides tips for preventing slips on wet surfaces, preventing trips over loose objects or in poor lighting, and preventing falls from heights or unstable surfaces. The key messages are to stay alert of hazards, wear proper shoes, clean up spills, use equipment safely like ladders, and make safety a habit.
Slips, trips, and falls represent a large number of preventable accidents within the school district and can result in serious and costly injuries for both employees and the district. They can occur both inside and outside due to hazards like slippery surfaces, clutter, or uneven walking areas. Proper training, awareness, housekeeping, wearing appropriate footwear, and reporting hazards can help reduce the risk of slips, trips and falls.
This safety orientation provides Washington State University Tri-Cities employees with basic safety information and procedures. It explains that safety is a shared responsibility and outlines resources available, such as contacting Environmental Health and Safety with concerns. Emergency procedures like evacuation routes and emergency notifications are also reviewed. The orientation stresses the importance of supervision-led job specific training and reporting any incidents or issues.
This SPCC plan is for San Jose International Airport. It provides procedures to prevent and respond to oil spills. The airport covers 1,050 acres and is located between Highway 101, Highway 880, the Guadalupe River, and Coleman Avenue. Three companies operate onsite to facilitate fueling of commercial and private aircraft. The plan identifies oil storage containers and areas with potential for discharge. It also describes spill prevention measures, inspections, security, emergency response procedures, and notification requirements in the event of a spill.
The 411 on secondary spill containment and spcc regulationsC.I.Agent Solutions
Secondary containment regulations were designed to protect the environment from pollution and contamination caused by oil spills. Facilities that store large quantities of petroleum products must have a plan in place to contain a spill, but navigating the necessary steps to ensure compliance with SPCC 40 CFR 112 can be tricky. This presentation attempts to define various aspects of secondary containment in a simple Q&A format.
Find more solutions to your secondary spill containment challenges at http://www.ciagent.com.
The document discusses the requirements for Oil Spill Prevention Control and Countermeasure (SPCC) Plans under the Clean Water Act. It provides an overview of the regulations and outlines what facilities need to include in their SPCC Plans, such as inventory of oil storage containers and equipment, procedures for oil spill response, inspection schedules, and training for employees. It emphasizes that the goal of SPCC Plans is to minimize the potential for oil releases to waters of the United States such as rivers, lakes, and wetlands.
Oil spills present real public health and environmental concerns. In response to these concerns, the EPA created rules around SPCC. The EPA’s SPCC rules are meant to prevent oil discharge from entering navigable waters and/or adjoining shorelines.
Hydraulic oil grade 68 anti wear and others grade oil are used over Indian railway track machines. While working, hydraulic fluid can pick up contamination in the form of dirt, wear particles and water. Contaminating particles circulating in the fluid system cause defects like abrasion, erosion and surface fatigue.
The document provides an overview of the SPCC rule and its requirements for oil pollution prevention. It discusses the background and purpose of the SPCC rule, outlines the rule's applicability and requirements for facilities to prepare and implement written SPCC plans. It also summarizes key elements that must be included in SPCC plans, such as secondary containment measures, inspection and training procedures, and requirements for plan amendments.
This document provides a summary of Ansumana E.M. Dukuly, Jr.'s excursion to the Liberia Petroleum Refinery Company (LPRC) in Monrovia, Liberia. It acknowledges the LPRC personnel who authorized and assisted with the excursion. The document outlines standards and recommendations for the design, construction, location, safety requirements, and operation of petroleum storage facilities like LPRC's based on Ansumana's observations and in accordance with API standards. Key areas covered include sitting requirements and spill containment, vessel design, recommended safety practices, and fire protection.
This document provides an overview of the annual Spill Prevention Control and Countermeasure (SPCC) training at UW-Stevens Point. It outlines the objectives of understanding why the university has an SPCC plan, sources of potential oil spills, how to prevent and respond to spills. It notes that any employees handling oils must receive annual training. The SPCC plan describes over 50,000 gallons of oil stored in 100 locations across campus and outlines inspection, response and reporting procedures to prevent spills from impacting local waterways. The training emphasizes the importance of being prepared to respond to spills and contacting the proper authorities immediately in the event a spill occurs.
Spill Prevention, Control and Countermeasure Plans (SPCC) - Kingsport, Sep 27UTCIS
Should your company be concerned about having a SPCC (Storm Water) Plan? (You might be surprised!) Learn more by reviewing this presentation, and attend one of the scheduled workshops.
CE oral Q&A .pdf which give oral preparation QA for MCA chief engineer oral e...sailorizzhere
The Chief Engineer is responsible for human resource management, technical operations, and ensuring compliance. Some key duties include inspecting CO2 plants and refrigerated cargo systems, monitoring budgets, overseeing drydocking, and ensuring availability of critical spares. When taking over a vessel, the Chief Engineer will assess documentation, certifications, maintenance records, budget and performance. The boiler can be preserved during layup via dry or wet storage with chemical inhibitors. After layup, class and re-commissioning surveys will be conducted. Rest hour regulations require a minimum of 10 hours rest in 24 and 77 hours in 7 days, with compensatory rest for any violations.
NSPS Subpart OOOO: Applicability and Compliance BasicsAll4 Inc.
Roy Rakiewicz of ALL4 Inc, presents "General Applicability of NSPS Subpart OOOO: Applicability and Compliance Basics". The presentation provides detailed information on: affected facilities, rule structure, storage vessel affected facilities, and gas well affected facilities.
Developing best management practices for marinas and waterfront 1 25-11Mario Cruz
A Presentation giving at the International Marine and Boat Conference in 2011 to help Marinas meet environmental goals and help achieve a "Clean Marina" status.
spillcontainment.com
The Importance of Integration of subsurface with surface facilities designRiley Smith
OPC's David Gorsuch and INTECSEA's John Harley recently delivered this presentation at the 9th Annual Offshore Production Technology Summit in London. The presentation highlights the importance of integration between the subsurface and surface facility design teams in achieving optimal field development plans for oil & gas assets.
Decommissioning of Offshore InstallationsMuanisa Waras
This training course will help your team improve your decommissioning strategies to reduce your offshore liabilities. Delegates will gain an in-depth understanding of the Asia Pacific market to prepare your company for decommissioning projects in the coming years. Your team will have an overview of the future challenges for the decommissioning market for operators and contractors and the strategies that need to be implemented to move projects forward. You will be able to formulate an effective and efficient decommissioning supply chain of experienced contractors to remove
offshore installations.
Transoil BV is an independent marine consultancy company that provides ship-to-ship transfer services, cargo surveying, bunker surveys, and loss control services worldwide. They have experienced superintendents and consultants who handle ship-to-ship transfers safely and efficiently. Transoil also offers equipment rentals, cargo surveys during loading and discharging, and on-hire and off-hire inspections to verify vessel condition during charters. Their experienced loss control team works to prevent real and apparent losses for clients in areas like crude oil, petroleum products, and biofuels.
Aqua-Guard has over 40 years of experience in responding to marine oil spills around the world. They provide oil spill response equipment and services to over 3,000 clients in 125 countries. Their flagship product is the RBS TRITON skimming system, which has been proven effective in recovering large volumes of oil in spills and tests. Aqua-Guard is focused on developing advanced offshore oil skimming systems and has extensive experience working with major oil companies on spill response.
This document summarizes the key provisions of MARPOL 73/78, the main international convention covering prevention of pollution of the marine environment by ships. It outlines the six annexes of MARPOL which cover pollution by oil, noxious liquid substances, harmful substances carried by sea in packaged form, sewage, garbage, and air pollution. For each annex, it provides details on entry into force date, prohibited discharge criteria, record keeping and equipment requirements such as oil filtering and sewage treatment systems.
Similar to Spill Prevention Control and Countermeasures by University of Alaska Fairbanks (20)
The document discusses wellness and promoting a healthy lifestyle and culture at work. It describes wellness as involving 7 dimensions of wellness: emotional, environmental, intellectual, social, physical, spiritual, and occupational. It outlines benefits to employees and the organization of promoting wellness, including improved health, productivity and morale. It encourages making healthy choices by focusing on diet, exercise and avoiding smoking. Finally, it provides suggestions for integrating wellness at work, such as healthy meetings and events, physical activity breaks, and stress management resources.
This document discusses the intersection of workplace wellness and policy. It outlines how establishing policies can support a healthy workplace environment and successful wellness program. The HEAL model promotes nutrition, physical activity, breastfeeding, and stress reduction. Policies are more sustainable than practices or programs alone and should focus on areas like wellness, physical activity, nutrition standards, and mental wellness. Examples of effective policies provided include stretch breaks, healthy meetings guidelines, flexible work schedules, active transportation, and lactation accommodation. The presentation emphasizes gaining leadership support and using data to inform simple policies that make healthy choices easy.
This document discusses managing stress in the workplace. It raises awareness about the growing problem of stress and provides guidance on assessing and preventing psychosocial risks. Successful management of psychosocial risks can improve worker well-being, productivity and compliance with legal requirements while reducing costs from absenteeism and staff turnover. The document outlines practical support for stress management, including engaging employees in the risk assessment process, and focusing on positive effects like a healthier and more motivated workforce.
Stress can be triggered by environmental, social, physiological, and thought-related factors. The body responds to stress through the fight or flight response, which is controlled by the brain and hypothalamus activating the sympathetic nervous system. This increases heart rate, blood pressure, breathing, and muscle tension while impairing judgment. Chronic stress can negatively impact cognitive function, mood, health, relationships and quality of life. Managing stress requires identifying its sources, setting goals to respond more effectively, using cognitive rehabilitation techniques, emotional defusing activities, physical interaction, and healthy behaviors.
The document discusses various topics related to stress and worker safety. It defines stress and provides examples of both bad and good stressors. It also discusses daily stressors workers may face and various causes of stress. The document lists warning signs of stress, as well as checklists of potential stress symptoms. It covers the effects of stress, including burnout, and discusses studies that examined stressful occupations and common coping methods for dealing with stress. Finally, it proposes strategies for reducing stress, including stress management programs and developing a healthy lifestyle.
This situation requires sensitivity and care. Jessica and Joe should be reminded that maintaining a respectful workplace is important for all. Their supervisor could speak to each privately, explain that while personal relationships may form, certain behaviors make others uncomfortable during work hours and could be perceived as harassment. The supervisor should listen without judgment, help them understand other perspectives, and request they keep private matters private at work. If issues continue, mediation may help address underlying concerns in a constructive way.
This document summarizes updates to a workplace harassment policy and procedures based on Bill 132 legislation. It expands the definition of workplace harassment to include sexual harassment. It outlines new requirements for employers including developing a written policy in consultation with employees, conducting annual reviews, investigating all complaints, allowing external investigations, and informing parties of investigation outcomes. It discusses employee rights and duties such as reporting harassment and participating in investigations. It provides examples of harassment including yelling, threats, unwanted sexual advances, name calling and isolating behaviors.
This presentation discusses workplace harassment policies and training. It defines harassment and reviews examples of inappropriate workplace behavior. Employers are liable for harassment that occurs in the workplace and must take steps to prevent harassment and respond promptly to complaints in order to avoid legal liability. The presentation provides an overview of harassment laws and emphasizes the importance of following organizational policies prohibiting harassment.
This document provides an overview of welding safety regulations and guidelines. It summarizes OSHA regulations on gas welding (1926.350), arc welding (1926.351), fire prevention (1926.352), ventilation (1926.353), and preservative coatings (1926.354). Key safety topics covered include proper handling and storage of gas cylinders, use of protective equipment, fire hazards, ventilation requirements, and training on welding equipment and processes. The document aims to educate welders on health and safety risks and how to work safely according to OSHA standards.
Slips, trips, and falls are a major cause of workplace injuries. Proper prevention techniques include good housekeeping to clean spills and remove obstacles, using the right footwear for the environment, and practicing safe behaviors like not running or carrying items that block your view. Employers are responsible for providing a safe work environment, while all employees should take responsibility for working safely, such as using handrails and following ladder safety procedures to avoid falls.
This document discusses preventing falls, slips, and trips (FSTs) in the workplace. It notes that FSTs accounted for over $5 million in workers' compensation costs in Georgia in 2011 and were the leading cause of injuries. It identifies common causes of FSTs like wet or slippery surfaces, uneven walking areas, clutter, and poor lighting. The document provides guidance on prevention strategies like maintaining good housekeeping, wearing appropriate footwear, fixing hazards, and paying attention while walking. It emphasizes that FSTs can often be prevented through awareness of risks and applying basic safety practices.
The document discusses preventing workplace harassment. It defines harassment and outlines employers' and employees' responsibilities. Harassment includes unwelcome conduct based on characteristics like race, sex, or disability. It becomes unlawful if it creates a hostile work environment or is a condition of employment. The document describes types of harassment like sexual harassment, quid pro quo harassment, hostile work environment, and third-party harassment. It provides guidance on reporting harassment, protecting yourself, and supervisors' responsibilities to address harassment complaints.
This document discusses the function of warehouses and operational support equipment in emergencies. Warehouses serve as transhipment points and to store and protect humanitarian cargo. Key criteria for assessing warehouse sites include structure, access, security, conditions, facilities, and location. Emergency storage options include existing buildings, mobile storage units, and constructing new warehouses. Support equipment requirements depend on the operational set-up and may include mobile storage units, office/accommodation prefabs, generators, and forklifts.
This document discusses the prevention of sexual harassment (POSH) in the military. It defines sexual harassment and outlines inappropriate behaviors like lewd comments and unwanted touching that create a hostile work environment. Service members are expected to treat each other with dignity and respect. The Uniform Code of Military Justice establishes penalties for sexual harassment and retaliation. Leaders are responsible for addressing issues and complaints, whether through informal resolution or formal procedures.
This training document covers sexual harassment, defining it as unwelcome sexual advances, requests for favors, and other verbal or physical harassment of a sexual nature. It outlines two types - quid pro quo, where submission is required for a job or benefit, and hostile environment. Examples of verbal, non-verbal and physical behaviors are provided. The document also discusses the individual, organizational and economic effects of sexual harassment, and strategies for prevention and response, including training, assessments and addressing issues before escalation. Resources for assistance are listed.
This document provides a summary of a company's sexual harassment training for employees. It defines sexual harassment, outlines the company's anti-harassment policy, and explains employees' obligations to avoid inappropriate conduct and report any instances of harassment. The training defines quid pro quo and hostile work environment harassment, provides examples of inappropriate verbal, visual and physical conduct, and instructs employees to promptly report any harassment to the appropriate parties.
The document summarizes the key findings and recommendations of a National Academies of Sciences, Engineering, and Medicine report on sexual harassment of women in academic sciences, engineering and medicine. The committee found that sexual harassment is common, negatively impacts women's careers and health, and is associated with male-dominated environments and climates that tolerate harassment. It recommends that institutions address gender harassment, move beyond legal compliance to change culture, and that professional societies help drive cultural changes. A system-wide effort is needed to create inclusive environments and prevent all forms of harassment.
1) A scaffold is a temporary elevated work platform used in construction. There are three main types: supported, suspended, and aerial lifts.
2) Scaffolds must be designed by a qualified person to support at least four times the intended load. They must have a sound footing and be properly inspected before each use.
3) Scaffold safety requires fall protection such as guardrails if a fall could be over 10 feet, and the supervision of a competent person during erection, alteration or dismantling. Hazard prevention includes securing scaffolds in high winds and keeping them clear of ice and snow.
The document discusses the role and qualities of a supervisor. It defines a supervisor as someone primarily in charge of a section and its employees, who is responsible for production quantity and quality. A supervisor derives authority from department heads to direct employees' work and ensure tasks are completed according to instructions. Effective supervision requires leadership, motivation, and communication skills. The supervisor acts as a link between management and workers, communicating policies and opinions in both directions. To be effective, a supervisor must have technical competence, managerial qualities, leadership skills, instruction skills, human orientation, decision-making abilities, and knowledge of rules and regulations.
Oregon State University provides a safety orientation for new employees that covers the following key points:
1) OSU is committed to ensuring a safe work environment and holds supervisors accountable for safety responsibilities. Disregard of safety policies may result in discipline.
2) The Office of Environmental Health and Safety (EH&S) oversees compliance with regulations from agencies like OSHA and ensures expertise in areas such as radiation, biological, and chemical safety.
3) New employees must review materials on hazard communication and complete any required job-specific safety training with their supervisors. Documentation of all training is mandatory.
The Steadfast and Reliable Bull: Taurus Zodiac Signmy Pandit
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
AI Transformation Playbook: Thinking AI-First for Your BusinessArijit Dutta
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
Discover the Beauty and Functionality of The Expert Remodeling Serviceobriengroupinc04
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...Herman Kienhuis
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...YourLegal Accounting
Effective financial management is important for expansion and scalability in the ever-changing US business environment. White Label Bookkeeping services is an innovative solution that is becoming more and more popular among businesses. These services provide a special method for managing financial duties effectively, freeing up companies to concentrate on their main operations and growth plans. We’ll look at how White Label Bookkeeping can help US firms expand and develop in this blog.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666Stone Art Hub
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Prescriptive analytics BA4206 Anna University PPTFreelance
Business analysis - Prescriptive analytics Introduction to Prescriptive analytics
Prescriptive Modeling
Non Linear Optimization
Demonstrating Business Performance Improvement
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART KALYAN CHART
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...Niswey
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
Spill Prevention Control and Countermeasures by University of Alaska Fairbanks
1. Training Requirements forTraining Requirements for
Spill Prevention Control andSpill Prevention Control and
Countermeasures (SPCC)Countermeasures (SPCC)
40 CFR Part 11240 CFR Part 112
University of Alaska FairbanksUniversity of Alaska Fairbanks
For better viewing open slide showFor better viewing open slide show
2. Purpose of SPCC RulePurpose of SPCC Rule
40 CFR Part 11240 CFR Part 112
To prevent oil discharges from reachingTo prevent oil discharges from reaching
navigable waters of the U.S. or itsnavigable waters of the U.S. or its
adjoining shorelinesadjoining shorelines
For the University of Alaska FairbanksFor the University of Alaska Fairbanks
Campus this includes the Chena River,Campus this includes the Chena River,
Deadman Slough, and any associatedDeadman Slough, and any associated
WetlandsWetlands
To ensure that effective measures areTo ensure that effective measures are
used in response to an oil dischargeused in response to an oil discharge
3. Required Training as Specified inRequired Training as Specified in
40 CFR Part 11240 CFR Part 112
All personnel who handle oil products must at a minimum be trained in:All personnel who handle oil products must at a minimum be trained in:
Operation and maintenance of equipment to prevent spillsOperation and maintenance of equipment to prevent spills
Spill response proceduresSpill response procedures
General facility operationsGeneral facility operations
Applicable pollution control laws, rules, and regulationsApplicable pollution control laws, rules, and regulations
And the contents of the site specific SPCC PlanAnd the contents of the site specific SPCC Plan
An individual must be designated and trained at each facility who is toAn individual must be designated and trained at each facility who is to
be accountable for discharge prevention and who reports to facilitybe accountable for discharge prevention and who reports to facility
managementmanagement
Spill prevention briefings must be held annually and must at a minimumSpill prevention briefings must be held annually and must at a minimum
include:include:
Any past spills, discharges, or failures of the plan or equipmentAny past spills, discharges, or failures of the plan or equipment
Any malfunctioning equipmentAny malfunctioning equipment
Any recently developed precautionary measures that have beenAny recently developed precautionary measures that have been
implementedimplemented
4. Original SPCC PlanOriginal SPCC Plan
Prevention RegulationPrevention Regulation
Required Site-specific plans to prevent oilRequired Site-specific plans to prevent oil
discharges that could affect navigable waters ofdischarges that could affect navigable waters of
the U.S.the U.S.
It defines a discharge as any leak or spill of oilIt defines a discharge as any leak or spill of oil
productsproducts
Effective January 10, 1974 and largelyEffective January 10, 1974 and largely
unchanged for the past 32 years.unchanged for the past 32 years.
The rule was formerly based on individual tank sizeThe rule was formerly based on individual tank size
and not aggregate storage capacityand not aggregate storage capacity
Authority was granted under the Clean WaterAuthority was granted under the Clean Water
Act (CWA) 311 and 501, and is codified underAct (CWA) 311 and 501, and is codified under
40 CFR 112.40 CFR 112.
5. What is the SPCC Plan?What is the SPCC Plan?
SPCC Stands for Spill Prevention, Control, andSPCC Stands for Spill Prevention, Control, and
Countermeasures Plan.Countermeasures Plan.
The University of Alaska Fairbanks SPCC PlansThe University of Alaska Fairbanks SPCC Plans
are kept on file at the EHS & RM Office and atare kept on file at the EHS & RM Office and at
their respective sites.their respective sites.
Power Plant, Seward, Northwest Campus, etc.Power Plant, Seward, Northwest Campus, etc.
The SPCC Plan is required by the EPA if aThe SPCC Plan is required by the EPA if a
facility can “facility can “reasonably be expected toreasonably be expected to
discharge harmful amounts of oil intodischarge harmful amounts of oil into
navigable waters of the U.S. or adjoiningnavigable waters of the U.S. or adjoining
shorelinesshorelines.”.”
6. Why Do Facilities Need an SPCCWhy Do Facilities Need an SPCC
Plan?Plan?
The Facility has aggregate above groundThe Facility has aggregate above ground
oil storage capacity of more than 1,320oil storage capacity of more than 1,320
gallons; andgallons; and
Oil can be reasonably expected to enterOil can be reasonably expected to enter
into navigable waters of the U.S. by storminto navigable waters of the U.S. by storm
drains, ditches, overland flow or otherdrains, ditches, overland flow or other
means into navigable waterways.means into navigable waterways.
7. When Does the SPCC Rule TakeWhen Does the SPCC Rule Take
Effect?Effect?
The Final Revised Rule was published in theThe Final Revised Rule was published in the
Federal Register on July 17, 2002.Federal Register on July 17, 2002.
Deadlines were extended on April 17, 2003, JuneDeadlines were extended on April 17, 2003, June
17, 2004, August 11, 2004, to give impacted17, 2004, August 11, 2004, to give impacted
facilities more time to comply with the rule.facilities more time to comply with the rule.
Currently, the Plan was required to be operationalCurrently, the Plan was required to be operational
by 17 February 2006 and implemented by 1 Julyby 17 February 2006 and implemented by 1 July
20092009
Elements of the “Revised Rule” must beElements of the “Revised Rule” must be
implemented by 1 July 2009.implemented by 1 July 2009.
8. SPCC Plan Certification andSPCC Plan Certification and
ReviewReview
For facilities with 10,000 gallons or more aboveFor facilities with 10,000 gallons or more above
ground oil storage capacity, the SPCC Planground oil storage capacity, the SPCC Plan
must be reviewed and certified by a Professionalmust be reviewed and certified by a Professional
Engineer (PE) to be in accordance with goodEngineer (PE) to be in accordance with good
engineering practices, including theengineering practices, including the
consideration of applicable industry standardsconsideration of applicable industry standards
and the requirements outlined in 40 CFR 112.and the requirements outlined in 40 CFR 112.
The Plan must be reviewed and certified everyThe Plan must be reviewed and certified every
five years.five years.
Any technical amendments to the Plan must beAny technical amendments to the Plan must be
certified by a PE.certified by a PE.
9. Qualifying FacilitiesQualifying Facilities
What is a Qualifying Facility for self certification?What is a Qualifying Facility for self certification?
The facility must have 10,000 gallons or less in aggregateThe facility must have 10,000 gallons or less in aggregate
aboveground oil storage capacity. aboveground oil storage capacity.
The facility mustThe facility must not have had (1) a single discharge of oil tohave had (1) a single discharge of oil to
navigable waters exceeding 1,000 U.S. gallons, or (2) two dischargesnavigable waters exceeding 1,000 U.S. gallons, or (2) two discharges
of oil to navigable waters each exceeding 42 U.S. gallons within anyof oil to navigable waters each exceeding 42 U.S. gallons within any
twelve-month period, for the three years prior to the SPCC Plantwelve-month period, for the three years prior to the SPCC Plan
certification date, or since becoming subject to 40 CFR part 112.certification date, or since becoming subject to 40 CFR part 112.
What does self certification include?What does self certification include?
The Plan has been prepared in accordance with accepted and soundThe Plan has been prepared in accordance with accepted and sound
industry practices and standards and with the rule requirementsindustry practices and standards and with the rule requirements
Procedures for required inspections and testing have been establishedProcedures for required inspections and testing have been established
The Plan is being fully implementedThe Plan is being fully implemented
The facility meets the qualifying criteriaThe facility meets the qualifying criteria
The Plan does not deviate from rule requirements except as allowedThe Plan does not deviate from rule requirements except as allowed
and as certified by a PEand as certified by a PE
Management approves the Plan and has committed resources toManagement approves the Plan and has committed resources to
implement itimplement it
10. Types of Oil Which May BeTypes of Oil Which May Be
Regulated Under the SPCCRegulated Under the SPCC
All petroleum based oils.All petroleum based oils.
Fuel Oil, Gasoline, Hydraulic Fluid, Motor Oil,Fuel Oil, Gasoline, Hydraulic Fluid, Motor Oil,
etc.etc.
Animal fats and oils.Animal fats and oils.
Fish and marine mammal oilsFish and marine mammal oils
Vegetable oilsVegetable oils
All the above oils mixed with wastesAll the above oils mixed with wastes
Never mix used oil with otherNever mix used oil with other
wasteswastes
11. Oil Storage at the University ofOil Storage at the University of
Alaska FairbanksAlaska Fairbanks
Oil Storage at the University of Alaska FairbanksOil Storage at the University of Alaska Fairbanks
includes;includes;
Aboveground Storage Tanks (ATS)Aboveground Storage Tanks (ATS)
Underground Storage Tanks (UTS)Underground Storage Tanks (UTS)
Hydraulic Elevator Systems and ReservoirsHydraulic Elevator Systems and Reservoirs
Electrical TransformersElectrical Transformers
Electrical SwitchesElectrical Switches
Waste Oil Collection StationsWaste Oil Collection Stations
Waste Cooking OilWaste Cooking Oil
55 Gallon Drums in various locations55 Gallon Drums in various locations
12. Containers Subject to SPCCContainers Subject to SPCC
RegulationRegulation
Any current oil storage container 55 gallonsAny current oil storage container 55 gallons
or greateror greater
This includes fuel tanks, drums, used oil,This includes fuel tanks, drums, used oil,
collection stations, cooking oil containers,collection stations, cooking oil containers,
hydraulic elevator reservoirs, etc.hydraulic elevator reservoirs, etc.
Any empty container 55 gallons or greaterAny empty container 55 gallons or greater
that isthat is capablecapable of storing oil and has notof storing oil and has not
been rendered unusable.been rendered unusable.
13. Types of ContainersTypes of Containers
Bulk Storage – Drums, Tanks, etc. used for the storageBulk Storage – Drums, Tanks, etc. used for the storage
of oil and oil productsof oil and oil products
Active Containers – Transformers, Hydraulic elevatorActive Containers – Transformers, Hydraulic elevator
reservoirs, and electrical switches currently in use arereservoirs, and electrical switches currently in use are
reviewed to see if they meet the criteria asreviewed to see if they meet the criteria as “Qualified“Qualified
Oil-Filled Operational Equipment.”Oil-Filled Operational Equipment.”
Qualified Oil-Filled Operational Equipment DO NOT haveQualified Oil-Filled Operational Equipment DO NOT have
to meet the secondary containment requirements of theto meet the secondary containment requirements of the
rule under section 112.8(c)rule under section 112.8(c)
Secondary Containment is any area that surrounds the containerSecondary Containment is any area that surrounds the container
such as a concrete berm, double walling, or retaining wall for thesuch as a concrete berm, double walling, or retaining wall for the
purpose of confining leaks or spills.purpose of confining leaks or spills.
14. Goals of SPCC TrainingGoals of SPCC Training
To familiarize employees with the written SPCCTo familiarize employees with the written SPCC
PlanPlan
To help employees identify oil storage locationsTo help employees identify oil storage locations
and loading proceduresand loading procedures
To assist in identifying spill pathwaysTo assist in identifying spill pathways
To provide a discussion of spill preventionTo provide a discussion of spill prevention
proceduresprocedures
To familiarize the employee with appropriate spillTo familiarize the employee with appropriate spill
response procedures and use of spill responseresponse procedures and use of spill response
equipment.equipment.
15. Who is Trained on the SPCC Plan?Who is Trained on the SPCC Plan?
ANY University of Alaska Fairbanks employeeANY University of Alaska Fairbanks employee
involved in oil handling, transfer, storage, spillinvolved in oil handling, transfer, storage, spill
response, or maintenance of oil equipment.response, or maintenance of oil equipment.
All employees of the University of AlaskaAll employees of the University of Alaska
Fairbanks Department of Environmental, Health,Fairbanks Department of Environmental, Health,
Safety, and Risk Management.Safety, and Risk Management.
Fuel oil delivery company employeesFuel oil delivery company employees
responsible for fueling University owned tanks.responsible for fueling University owned tanks.
16. SPCC Training RequirementsSPCC Training Requirements
Training is to be taken annually so as to informTraining is to be taken annually so as to inform
personnel involved in oil storage or oilpersonnel involved in oil storage or oil
maintenance about proper actions to be taken inmaintenance about proper actions to be taken in
the event of a spill.the event of a spill.
Training is also to be conducted whenever aTraining is also to be conducted whenever a
new employee is assigned to oil handling,new employee is assigned to oil handling,
maintenance, or spill response duties.maintenance, or spill response duties.
Successful completion of this training will allowSuccessful completion of this training will allow
the employee to be designated as an “On-Sitethe employee to be designated as an “On-Site
SPCC Coordinator” when appropriate orSPCC Coordinator” when appropriate or
necessary.necessary.
17. Main Elements of the SPCCMain Elements of the SPCC
PlanPlan
Operating ProceduresOperating Procedures implemented toimplemented to
prevent oil spills.prevent oil spills.
Examples: Regular inspections, SPCC On-SiteExamples: Regular inspections, SPCC On-Site
Coordinator observing tank filling procedures.Coordinator observing tank filling procedures.
Control MeasuresControl Measures installed to prevent oil frominstalled to prevent oil from
reaching navigable waters.reaching navigable waters.
Example: Secondary containment.Example: Secondary containment.
CountermeasuresCountermeasures to contain, cleanup, andto contain, cleanup, and
mitigate the effects of an oil spill.mitigate the effects of an oil spill.
Examples: Cleanup and spill equipment availability onExamples: Cleanup and spill equipment availability on
site, available list of contacts and phone numbers forsite, available list of contacts and phone numbers for
employee use during spills.employee use during spills.
18. SPCC Program GoalsSPCC Program Goals
Spill PreventionSpill Prevention
Installation of proper equipment, repair ofInstallation of proper equipment, repair of
malfunctioning systems, inspections, and good fuelingmalfunctioning systems, inspections, and good fueling
and handling practicesand handling practices
Spill ControlSpill Control
Monitoring of leak detection, proper reporting,Monitoring of leak detection, proper reporting,
inspection of containment and piping systems.inspection of containment and piping systems.
Spill CountermeasuresSpill Countermeasures
Quick, proper, and safe response to spills.Quick, proper, and safe response to spills.
19. Potential Spill PathwaysPotential Spill Pathways
In some areas, oil can enter the “NavigableIn some areas, oil can enter the “Navigable
Waters or adjoining shorelines” by:Waters or adjoining shorelines” by:
Direct spillage into a storm drain.Direct spillage into a storm drain.
Direct spillage to areas that lead to Deadman SloughDirect spillage to areas that lead to Deadman Slough
or the Chena River.or the Chena River.
Never allow oil to drain into an open drain orNever allow oil to drain into an open drain or
into a ditch or waterway.into a ditch or waterway.
Oil containing equipment (i.e. a vehicle) isOil containing equipment (i.e. a vehicle) is
never to be rinsed or washed near a stormnever to be rinsed or washed near a storm
drain or waterway.drain or waterway.
20. Spill Scenarios (Large Release)Spill Scenarios (Large Release)
Damage to or accidental release from oilDamage to or accidental release from oil
delivery equipment during loading ordelivery equipment during loading or
unloading of oil at fill ports of storageunloading of oil at fill ports of storage
tanks.tanks.
Catastrophic Tank FailureCatastrophic Tank Failure
Fuel tanker failure during deliveryFuel tanker failure during delivery
Motor vehicle accident involving oilMotor vehicle accident involving oil
delivery equipment.delivery equipment.
21. Spill Scenarios (Small Release)Spill Scenarios (Small Release)
Small overfill at fill port of fuel tanks.Small overfill at fill port of fuel tanks.
Spillage of oil during transfer to or fromSpillage of oil during transfer to or from
drums and tanks.drums and tanks.
Leaking and or failure of pipes andLeaking and or failure of pipes and
pumps.pumps.
Leaking and or failure of drums.Leaking and or failure of drums.
22. Spill PreventionSpill Prevention
Routine InspectionsRoutine Inspections
Your site specific SPCC plan includes the frequencyYour site specific SPCC plan includes the frequency
schedule and checklist necessary for your inspection.schedule and checklist necessary for your inspection.
Ensure that necessary maintenance and repairs areEnsure that necessary maintenance and repairs are
completed as scheduled and recorded.completed as scheduled and recorded.
SPCC specific inspections are conducted on aSPCC specific inspections are conducted on a
Weekly, Monthly, Quarterly, and Annually basis asWeekly, Monthly, Quarterly, and Annually basis as
outlined in the Periodic Inspection Checklist.outlined in the Periodic Inspection Checklist.
Inspection records must be kept for a minimum ofInspection records must be kept for a minimum of
three yearsthree years
23. Spill PreventionSpill Prevention
Fuel DeliveriesFuel Deliveries
Tank Truck Drivers loading or unloading materials onTank Truck Drivers loading or unloading materials on
University property shall adhere to the following:University property shall adhere to the following:
Remain with vehicle at ALL Times while loading orRemain with vehicle at ALL Times while loading or
unloading.unloading.
Drain lines to storage tanks and close the drain valves beforeDrain lines to storage tanks and close the drain valves before
disconnecting and ensure that appropriate containment isdisconnecting and ensure that appropriate containment is
located beneath connections.located beneath connections.
Inspect vehicle prior to departure to ensure that all lines areInspect vehicle prior to departure to ensure that all lines are
disconnected and all drains and vents are closeddisconnected and all drains and vents are closed
Immediately report all spillage to University personnelImmediately report all spillage to University personnel
24. Spill PreventionSpill Prevention
Alarms / Shutoff ValvesAlarms / Shutoff Valves
Monitor activity of leak detection / overfillMonitor activity of leak detection / overfill
protection systems and respond immediatelyprotection systems and respond immediately
to alarms.to alarms.
DO NOT assume alarms are false, even ifDO NOT assume alarms are false, even if
repeatedly activated.repeatedly activated.
DO NOT leave fueling station unsupervisedDO NOT leave fueling station unsupervised
during loading operations.during loading operations.
Perform regular tests on monitoring systemsPerform regular tests on monitoring systems
to ensure operational capabilities.to ensure operational capabilities.
25. Secondary ContainmentSecondary Containment
Definition of proper containmentDefinition of proper containment
All bulk storage containers of oil must be located inAll bulk storage containers of oil must be located in
containment sufficient for the entire capacity of thecontainment sufficient for the entire capacity of the
largest container and sufficient have sufficientlargest container and sufficient have sufficient
freeboard to contain an additional 10% volume.freeboard to contain an additional 10% volume.
Secondary containment must be impervious materialSecondary containment must be impervious material
Secondary containment isSecondary containment is NOTNOT required for Qualifiedrequired for Qualified
Oil-Filled Operational Equipment such asOil-Filled Operational Equipment such as
transformers or electrical switches currently in use.transformers or electrical switches currently in use.
26. Secondary ContainmentSecondary Containment
Routine InspectionRoutine Inspection
Can be performed by any SPCC On-siteCan be performed by any SPCC On-site
Coordinator.Coordinator.
Check for indication of oil leaks on floors,Check for indication of oil leaks on floors,
pallets, dikes, retaining walls, and berms.pallets, dikes, retaining walls, and berms.
Water must be able to drain out ONLY if thereWater must be able to drain out ONLY if there
is no noticeable sheen.is no noticeable sheen.
Refer to your site specific SPCC plan forRefer to your site specific SPCC plan for
specific details regarding your site’s secondaryspecific details regarding your site’s secondary
containment inspection.containment inspection.
27. Secondary ContainmentSecondary Containment
Transformers, Electrical Switches, andTransformers, Electrical Switches, and
Elevator Tanks may be exempt from theElevator Tanks may be exempt from the
requirement of secondary containment ofrequirement of secondary containment of
the SPCC (Section 112.8 (c); 112.9 (c)),the SPCC (Section 112.8 (c); 112.9 (c)),
but still must be routinely inspected.but still must be routinely inspected.
28. Spill ResponseSpill Response
Discovery of ReleaseDiscovery of Release
Extinguish or remove any source of ignition.Extinguish or remove any source of ignition.
Identify the material and its point of release.Identify the material and its point of release.
Notify your supervisor immediately.Notify your supervisor immediately.
Attempt toAttempt to stop the releasestop the release at its source if itat its source if it
is safe to do so.is safe to do so.
Initiate the spill reporting procedure asInitiate the spill reporting procedure as
specified in your site specific SPCC plan.specified in your site specific SPCC plan.
Reference the Material Safety Data SheetReference the Material Safety Data Sheet
(MSDS) for the spilled substance.(MSDS) for the spilled substance.
29. Spill ResponseSpill Response
Containment of ReleaseContainment of Release
Attempt to stop the release at the sourceAttempt to stop the release at the source
Contain material to prevent release into theContain material to prevent release into the
environmentenvironment
Recover or clean up spilled materialRecover or clean up spilled material
Decontaminate tools and equipmentDecontaminate tools and equipment
Arrange for disposal of waste materialsArrange for disposal of waste materials
through EHS & RMthrough EHS & RM
EHS & RM is responsible for reporting toEHS & RM is responsible for reporting to
outside agencies.outside agencies.
30. Spill ReportingSpill Reporting
DocumentationDocumentation
The SPCC On-Site Coordinator will relay to EHS &The SPCC On-Site Coordinator will relay to EHS &
RM any reports of spills and include theRM any reports of spills and include the
following information:following information:
Date, time, and duration of releaseDate, time, and duration of release
Type of incidentType of incident
Material involvedMaterial involved
Volume of material involvedVolume of material involved
SPCC Plan DiscrepanciesSPCC Plan Discrepancies
Actions taken to avoid future incidentsActions taken to avoid future incidents
31. After a SpillAfter a Spill
A Spill Report will be completed by theA Spill Report will be completed by the
On-site Coordinator, reviewed withOn-site Coordinator, reviewed with
affected parties, and filed with EHS & RM.affected parties, and filed with EHS & RM.
Be sure to include information on:Be sure to include information on:
How to prevent another occurrenceHow to prevent another occurrence
Effectiveness of the responseEffectiveness of the response
Remember to restock your spill kit withRemember to restock your spill kit with
any used items and/or add items that mayany used items and/or add items that may
be useful in the future if warranted.be useful in the future if warranted.
32. Spill Response SuppliesSpill Response Supplies
Floor DryFloor Dry
Absorbent booms, pads, and socksAbsorbent booms, pads, and socks
Protective gloves and safety gogglesProtective gloves and safety goggles
Caution tapeCaution tape
Shovels, brooms, and pansShovels, brooms, and pans
Collection Drums and labelingCollection Drums and labeling
33. Spill Reporting InformationSpill Reporting Information
Spill Reporting:Spill Reporting:
Refer to your site specific plan on reporting procedures.Refer to your site specific plan on reporting procedures.
Oil discharged to water:Oil discharged to water:
Any release of oil to waterAny release of oil to water must be reported as soon as themust be reported as soon as the
person has knowledge of the discharge.person has knowledge of the discharge.
Oil discharged to land:Oil discharged to land:
Any release of oilAny release of oil in excess of 55 gallonsin excess of 55 gallons must be reported asmust be reported as
soon as the person has knowledge of the discharge.soon as the person has knowledge of the discharge.
Any release of oilAny release of oil in excess of 10 gallons but less than 55in excess of 10 gallons but less than 55
gallonsgallons must be reported within 48 hours after the person hasmust be reported within 48 hours after the person has
knowledge of the discharge.knowledge of the discharge.
A person in charge of a facility shall maintain and provide a monthlyA person in charge of a facility shall maintain and provide a monthly
written record of any discharge of oilwritten record of any discharge of oil from 1 to 10 gallonsfrom 1 to 10 gallons ..
Oil discharged to secondary containment areas:Oil discharged to secondary containment areas:
Any release of oilAny release of oil in excess of 55 gallonsin excess of 55 gallons must be reportedmust be reported
within 48 hours after the person has knowledge of the discharge.within 48 hours after the person has knowledge of the discharge.
34. Fueling OperationsFueling Operations
No smoking is permitted during fuelingNo smoking is permitted during fueling
operationsoperations
The delivery driver must remain with the vehicleThe delivery driver must remain with the vehicle
at all times during the fueling operation.at all times during the fueling operation.
The delivery driver will insure that the vehicle isThe delivery driver will insure that the vehicle is
properly positioned and that drip pans orproperly positioned and that drip pans or
absorbent pads are beneath all fuel lineabsorbent pads are beneath all fuel line
connections.connections.
The delivery driver will have proper spill controlThe delivery driver will have proper spill control
supplies (booms, pads, etc.), a list of contactsupplies (booms, pads, etc.), a list of contact
numbers, and a working cell phone.numbers, and a working cell phone.
35. SecuritySecurity
Regulated containers are to be locatedRegulated containers are to be located
inside locked rooms or access controlledinside locked rooms or access controlled
areas, or gated and locked areasareas, or gated and locked areas
accessible to authorized personnel.accessible to authorized personnel.
Lighting must be sufficient to enable theLighting must be sufficient to enable the
visualization of spills or leaks during hoursvisualization of spills or leaks during hours
of darkness and to detour releases fromof darkness and to detour releases from
occurring through acts of vandalism.occurring through acts of vandalism.
36. Common SPCC ViolationsCommon SPCC Violations
Inadequate Secondary ContainmentInadequate Secondary Containment
Containment is either nonexistent, porous, orContainment is either nonexistent, porous, or
incapable of containing a spill due to improper size.incapable of containing a spill due to improper size.
Fueling procedures not properly followedFueling procedures not properly followed
Procedure is not properly observed, spill equipment isProcedure is not properly observed, spill equipment is
not readily available, etc.not readily available, etc.
Security fencing and/or lighting not presentSecurity fencing and/or lighting not present
where applicablewhere applicable
Gates are left unlocked, lighting is not maintainedGates are left unlocked, lighting is not maintained
Training and inspection records not properlyTraining and inspection records not properly
documented or fileddocumented or filed
37. Health Concerns of OilsHealth Concerns of Oils
Researchers know very little about the human health effects caused by fuelResearchers know very little about the human health effects caused by fuel
oils. Breathing vapor from fuel oil no. 1 (also known as kerosene or JP-5) foroils. Breathing vapor from fuel oil no. 1 (also known as kerosene or JP-5) for
periods as short as one hour may make you feel nauseous, irritate skin andperiods as short as one hour may make you feel nauseous, irritate skin and
eyes, or affect the nervous system. Some other effects include headache,eyes, or affect the nervous system. Some other effects include headache,
light-headedness, loss of appetite, poor coordination, and difficultylight-headedness, loss of appetite, poor coordination, and difficulty
concentrating. Breathing diesel fuel vapors for a long time may damageconcentrating. Breathing diesel fuel vapors for a long time may damage
kidneys, increase blood pressure, or lower the blood's ability to clot.kidneys, increase blood pressure, or lower the blood's ability to clot.11
Persons with respiratory problems such as asthma, as well as youngPersons with respiratory problems such as asthma, as well as young
children, seniors, and persons with heightened sensitivity to chemicals maychildren, seniors, and persons with heightened sensitivity to chemicals may
be more susceptible to illness from exposure from fuel oils. People may bebe more susceptible to illness from exposure from fuel oils. People may be
especially concerned about young children and pets. If they touchespecially concerned about young children and pets. If they touch
contaminated soil or surfaces, may accidentally bring the fuel oil to theircontaminated soil or surfaces, may accidentally bring the fuel oil to their
mouth or eyes. Several case studies have reported accidental poisoningmouth or eyes. Several case studies have reported accidental poisoning
and death in children as the result of drinking kerosene. People with openand death in children as the result of drinking kerosene. People with open
cuts or recently healed wounds should be careful to stay away from fuel oil.cuts or recently healed wounds should be careful to stay away from fuel oil.22
1
Agency for Toxic Substances and Disease Registry
2
US Department of Health and Human Services
39. Questions?Questions?
University of Alaska Fairbanks DepartmentUniversity of Alaska Fairbanks Department
of Environmental, Health, Safety, & Riskof Environmental, Health, Safety, & Risk
ManagementManagement
Please contact us at 474-5413 with anyPlease contact us at 474-5413 with any
questions or concerns that you may have.questions or concerns that you may have.
Quiz information on next slide.Quiz information on next slide.
40. Please complete the quizPlease complete the quiz
Quiz is located at:Quiz is located at: www.uaf.edu/safetywww.uaf.edu/safety
TrainingTraining
UAF Safety Training PowerPointsUAF Safety Training PowerPoints
Complete quiz, click the “send quiz to EHS&RM” button.Complete quiz, click the “send quiz to EHS&RM” button.
NOTE:NOTE: There is no need to contact EHS&RM to let usThere is no need to contact EHS&RM to let us
know you have finished the quiz. fysafety@uaf.edu isknow you have finished the quiz. fysafety@uaf.edu is
checked throughout the day, and your score will bechecked throughout the day, and your score will be
electronically filed for future reference.electronically filed for future reference.