Spatial charge separation on the (110)/(102) facets of cocatalyst-free ZnIn2S4 for the selective conversion of 5-hydroxymethylfurfural to 2,5-diformylfuran
Photorefining of biomass and its derivatives to value-added chemicals is an alternative solution to address the global energy shortage and environmental issues. Herein, efficient and selective oxidation of 5-hydroxymethylfurfural (HMF, 91.1% conversion) to 2,5-diformylfuran (DFF, 99.4% selectivity) is demonstrated by visible light-driven photocatalysis over cocatalyst-free ZnIn2S4 nanosheets with crystal facet engineering. The spatial accumulation of photogenerated electrons and holes on the (110) and (102) crystal facets triggers a two-electron oxygen reduction reaction (2e-ORR) for H2O2 generation and HMF oxidation into DFF, respectively. The severe attenuation of photostability is caused by the irreversible photocorrosion of Zn–S with the formation of Zn–O chemical bonds by the formation of ˙OH from the in situ decomposition of H2O2. Spontaneous substitution of oxygen with sulfur has been proven to efficiently improve the photostability of ZnIn2S4. This present work provides insights into improving the durability of ZnIn2S4 and sheds new light on biomass valorization via photorefinery.
This document summarizes the synthesis and characterization of three titanium-containing metal-organic framework (MOF) photocatalysts: MIL-125, MIL-NH2, and SMIL-NH2. MIL-125 and MIL-NH2 were synthesized via a conventional solvothermal method, while SMIL-NH2 was synthesized using the same method with the addition of a nonionic surfactant. Characterization showed that SMIL-NH2 had a more uniform cylindrical morphology with smaller particle sizes of 50-250 nm and over double the surface area of MIL-NH2. Photocatalytic testing found that under blue LED light, SMIL-NH2 was able to
Nitrogen-doped graphene-supported copper complex: a novel photocatalyst for C...Pawan Kumar
A copper(II) complex grafted to nitrogen-doped graphene (GrN700–CuC) was synthesized and then
demonstrated as an efficient photocatalyst for CO2 reduction into methanol under visible light irradiation
using a DMF/water mixture. The chemical and microstructural features of GrN700–CuC nanosheets were
studied by FTIR, XPS, XRD and HRTEM analyses. Owing to its truly heterogeneous nature, GrN700–CuC
could be easily recovered after the photocatalytic reaction and showed efficient recyclability for
subsequent runs.
Sonocatalytic Performance of Fe3O4 Cluster Microspheres Gratiphic Carbon Comp...ijtsrd
Fe3O4 g C3N4 composite was synthesized using hydrothermal simple and facile techniques. The sonocatalytic activity of the magnetic Fe3O4 g C3N4 composite was studied through the H2O2 assisted system for degradation of water soluble organic pollutants such as methylene blue MB , rhodamine B RhB and methyl orange MO . X ray diffraction XRD and scanning electron microscopy SEM equipped were employed for the characterizing the structure and morphology of the so synthesized nanohybrid. The integration of H2O2 and catalyst dosage enhaced the sonocatalytic degradation of dyes. Furthermore, the magnetic property of the sample leaded to easier separation of the microhybrid, made it recyclable with a negligible decline in the dye degradation even after four consecutive recycles. Xuan Sang Nguyen "Sonocatalytic Performance of Fe3O4 Cluster Microspheres/Gratiphic Carbon Composite for Efficient Degradation of Organic Dyes" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57418.pdf Paper URL: https://www.ijtsrd.com.com/chemistry/environmental-chemistry/57418/sonocatalytic-performance-of-fe3o4-cluster-microspheresgratiphic-carbon-composite-for-efficient-degradation-of-organic-dyes/xuan-sang-nguyen
This document summarizes heterogeneous photocatalysis research from the literature. It begins by introducing heterogeneous photocatalysis and its applications. Section II then surveys the types of photocatalytic reactions that have been observed, including oxidations, reductions, isomerizations, substitutions, condensations, and polymerizations. Section III discusses the mechanisms of photocatalysis, involving photoelectrochemistry and the roles of electron-hole pairs, oxygen, hydroxyl radicals, adsorption, and kinetics. Subsequent sections cover topics like active photocatalysts, pretreatment methods, and effects of parameters like pH, temperature, and sensitization.
The document summarizes research on the fabrication of iron oxide microrods (MRs) with different crystal phases through a solvothermal method and annealing processes. It was found that carbon remained in the structures when annealing at low temperature (150°C), contributing to higher dye adsorption and drug loading capabilities. The Fe3O4-C sample showed superior adsorption of cationic and anionic dyes. When applied as a drug carrier, the MRs achieved mass loading ratios of 12.9% for chemical loading and 7.8% for physical loading of tissue plasminogen activator. The magnetic structures show potential for applications in water treatment and medicine.
The project will focus on synthesis of hexagonal structured pure phases of compositions: BaM1/3Ti2/3O3-δ and BaM1/6Ti5/6O3-δ, where M= Sc, In and Fe via different methods such as Solid state sintering and wet chemical route. The ultimate goal is to finding structure – functionality relationships within these proton and mixed conducting systems. A substantial effort will focus on search for and fabrication of new materials although the main part of the work will concentrate on detailed structural characterisation (rietveld refinement), impedance spectroscopy, infrared spectroscopy and thermogravimetric analysis.
Application of Fe3O4 Sphere Doped with Zn for Enhanced Sonocatalytic Removal ...ijtsrd
The document describes research on using Fe3O4 spheres doped with zinc (Zn) as a sonocatalyst for removing hexavalent chromium (Cr(VI)) from aqueous solutions. Fe3O4 spheres doped with Zn were synthesized using a simple solvothermal method. Characterization showed the Zn was successfully doped into the crystal structure of Fe3O4 spheres. Testing found the doped spheres had high sonocatalytic activity for degrading Cr(VI) under visible light, with 95.8% removal efficiency. The enhanced activity is attributed to the uniform sphere structure and metal doping effect.
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
This document summarizes the synthesis and characterization of three titanium-containing metal-organic framework (MOF) photocatalysts: MIL-125, MIL-NH2, and SMIL-NH2. MIL-125 and MIL-NH2 were synthesized via a conventional solvothermal method, while SMIL-NH2 was synthesized using the same method with the addition of a nonionic surfactant. Characterization showed that SMIL-NH2 had a more uniform cylindrical morphology with smaller particle sizes of 50-250 nm and over double the surface area of MIL-NH2. Photocatalytic testing found that under blue LED light, SMIL-NH2 was able to
Nitrogen-doped graphene-supported copper complex: a novel photocatalyst for C...Pawan Kumar
A copper(II) complex grafted to nitrogen-doped graphene (GrN700–CuC) was synthesized and then
demonstrated as an efficient photocatalyst for CO2 reduction into methanol under visible light irradiation
using a DMF/water mixture. The chemical and microstructural features of GrN700–CuC nanosheets were
studied by FTIR, XPS, XRD and HRTEM analyses. Owing to its truly heterogeneous nature, GrN700–CuC
could be easily recovered after the photocatalytic reaction and showed efficient recyclability for
subsequent runs.
Sonocatalytic Performance of Fe3O4 Cluster Microspheres Gratiphic Carbon Comp...ijtsrd
Fe3O4 g C3N4 composite was synthesized using hydrothermal simple and facile techniques. The sonocatalytic activity of the magnetic Fe3O4 g C3N4 composite was studied through the H2O2 assisted system for degradation of water soluble organic pollutants such as methylene blue MB , rhodamine B RhB and methyl orange MO . X ray diffraction XRD and scanning electron microscopy SEM equipped were employed for the characterizing the structure and morphology of the so synthesized nanohybrid. The integration of H2O2 and catalyst dosage enhaced the sonocatalytic degradation of dyes. Furthermore, the magnetic property of the sample leaded to easier separation of the microhybrid, made it recyclable with a negligible decline in the dye degradation even after four consecutive recycles. Xuan Sang Nguyen "Sonocatalytic Performance of Fe3O4 Cluster Microspheres/Gratiphic Carbon Composite for Efficient Degradation of Organic Dyes" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57418.pdf Paper URL: https://www.ijtsrd.com.com/chemistry/environmental-chemistry/57418/sonocatalytic-performance-of-fe3o4-cluster-microspheresgratiphic-carbon-composite-for-efficient-degradation-of-organic-dyes/xuan-sang-nguyen
This document summarizes heterogeneous photocatalysis research from the literature. It begins by introducing heterogeneous photocatalysis and its applications. Section II then surveys the types of photocatalytic reactions that have been observed, including oxidations, reductions, isomerizations, substitutions, condensations, and polymerizations. Section III discusses the mechanisms of photocatalysis, involving photoelectrochemistry and the roles of electron-hole pairs, oxygen, hydroxyl radicals, adsorption, and kinetics. Subsequent sections cover topics like active photocatalysts, pretreatment methods, and effects of parameters like pH, temperature, and sensitization.
The document summarizes research on the fabrication of iron oxide microrods (MRs) with different crystal phases through a solvothermal method and annealing processes. It was found that carbon remained in the structures when annealing at low temperature (150°C), contributing to higher dye adsorption and drug loading capabilities. The Fe3O4-C sample showed superior adsorption of cationic and anionic dyes. When applied as a drug carrier, the MRs achieved mass loading ratios of 12.9% for chemical loading and 7.8% for physical loading of tissue plasminogen activator. The magnetic structures show potential for applications in water treatment and medicine.
The project will focus on synthesis of hexagonal structured pure phases of compositions: BaM1/3Ti2/3O3-δ and BaM1/6Ti5/6O3-δ, where M= Sc, In and Fe via different methods such as Solid state sintering and wet chemical route. The ultimate goal is to finding structure – functionality relationships within these proton and mixed conducting systems. A substantial effort will focus on search for and fabrication of new materials although the main part of the work will concentrate on detailed structural characterisation (rietveld refinement), impedance spectroscopy, infrared spectroscopy and thermogravimetric analysis.
Application of Fe3O4 Sphere Doped with Zn for Enhanced Sonocatalytic Removal ...ijtsrd
The document describes research on using Fe3O4 spheres doped with zinc (Zn) as a sonocatalyst for removing hexavalent chromium (Cr(VI)) from aqueous solutions. Fe3O4 spheres doped with Zn were synthesized using a simple solvothermal method. Characterization showed the Zn was successfully doped into the crystal structure of Fe3O4 spheres. Testing found the doped spheres had high sonocatalytic activity for degrading Cr(VI) under visible light, with 95.8% removal efficiency. The enhanced activity is attributed to the uniform sphere structure and metal doping effect.
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
This document summarizes research on the photoelectrocatalytic degradation of Remazol Black B (RBB) dye using nanostructured tungsten oxide (WO3) film electrodes. Key findings include:
1) WO3 film electrodes were found to be better photoelectrocatalysts for degrading RBB dye than titanium dioxide (TiO2) electrodes or molybdenum oxide (MoO3) electrodes with similar surface roughness.
2) Kinetic measurements showed the degradation of RBB on WO3 followed a generalized Langmuir-Hinshelwood model with an overall rate constant of 1.1 × 10−9 mol cm−2s−1.
3
Crimson publishers-Biosynthesis of the Fe3O4 Nanoparticles Using Acacia Nilot...CrimsonpublishersTTEFT
Biosynthesis of the Fe3O4 Nanoparticles Using Acacia Nilotica Leaf Extract and their Effect on Degradation of Congo Red Dye in Aqueous Solution by Vasantha Jyothi NVV* and Venkateswarlu P* in Trends in Textile Engineering & Fashion Technology
Optical Control of Selectivity of High Rate CO2 Photoreduction Via Interband-...Pawan Kumar
Photonic crystals consisting of TiO2 nanotube arrays (PMTiNTs) with periodically modulated diameters were fabricated using a precise charge-controlled pulsed anodization technique. The PMTiNTs were decorated with gold nanoparticles (Au NPs) to form plasmonic photonic crystal photocatalysts (Au-PMTiNTs). A systematic study of CO2 photoreduction performance on as-prepared samples was conducted using different wavelengths and illumination sequences. A remarkable selectivity of the mechanism of CO2 photoreduction could be engineered by merely varying the spectral composition of the illumination sequence. Under AM1.5 G simulated sunlight (pathway#1), the Au-PMTiNTs produced methane (302 µmol h-1) from CO2 with high selectivity (89.3%). When also illuminated by a UV-poor white lamp (pathway#2), the Au-PMTiNTs produced formaldehyde (420 µmol h-1) and carbon monoxide (323 µmol h-1) with almost no methane evolved. We confirmed the photoreduction results by 13C isotope labeling experiments using GC-MS. These results point to optical control of the selectivity of high-rate CO2 photoreduction through selection of one of two different mechanistic pathways. Pathway#1 implicates electron-hole pairs generated through interband transitions in TiO2 and Au as the primary active species responsible for reducing CO2 to methane. Pathway#2 involves excitation of both TiO2 and surface plasmons in Au. Hot electrons produced by plasmon damping and photogenerated holes in TiO2 proceed to reduce CO2 to HCHO and CO through a plasmonic Z-scheme.
Surface fluorination of α-Fe2O3 using selectfluor for enhancement in photoele...Devika Laishram
Fluorinated α-Fe2O3 nanostructures are synthesized via a facile hydrothermal route using Selectfluor™ (F-TEDA)
as a fluorinating as well as growth directing agent. The addition of incrementally increasing amount of F-TEDA
to Fe precursor under hydrothermal conditions resulted in preferential growth of α-Fe2O3 along (110) orientation with respect to (104) direction by ~ 35%, the former being important for enhanced charge transport.
On increasing fluorination, the heirarchical dendritic-type α-Fe2O3 changes to a snow-flake type structure (FTEDA-20%) anisotropically growing along the six directions however, at higher F-TEDA concentrations (≥
30%), loosely held particulate aggregates are seen to be formed. The X-Ray Photoelectron Spectroscopy (XPS)
suggest the maximum fluorinarion of α-Fe2O3 at 1.21 at% in 30% F-TEDA. Further, optical absorption studies
reveal reduction in optical band gap from 2.10 eV in case of pristine to 1.95 eV for fluorinated α-Fe2O3. A
photoanode made by taking 20% fluorinated α-Fe2O3 in a ratio of 10:90 with respect to TiO2 (P-25) showed
improved performance in dye sensitized solar cells with an increase in efficiency by ~16% in comparision to that
of pristine Fe2O3 and TiO2. Furthermore, anode consisting of thin films of fluorinated α-Fe2O3 on FTO also
exhibit enhanced current density on illumination of ~100 W/m2
. The increase in photoelectrochemical activity
seems to be due to the combination of two factors namely preferential growth of α-Fe2O3 along (110) direction
resulting in an improved charge transfer efficiency and reduced recombination losses due to the presence of
fluorine.
Graphene oxide immobilized copper phthalocyanine tetrasulphonamide: the first...Pawan Kumar
The first successful synthesis of DMC directly from methanol and carbon dioxide using a heterogenized
homogeneous graphene oxide immobilized copper phthalocyanine tetrasulphonamide catalyst in the
presence of N,N0-dicyclohexylcarbodiimide (DCC) as a dehydrating agent is described. The presence of a
dehydrating agent was found to be vital and in its absence the yield of DMC was found to be decreased
significantly. Under the optimized reaction conditions, the maximum yield of DMC reaches up to 13.3%.
Although the homogeneous copper phthalocyanine tetrasulphonamide catalyst provided a little higher
yield of DMC (14.2%), the facile recovery and recycling ability of the heterogeneous catalyst make the
developed method more attractive from environmental and economical viewpoints.
This document summarizes a study on the adsorption of a Schiff base ligand onto granulated initiated calcined Iraqi montmorillonite clay via columnar method. The ligand was synthesized from the condensation reaction of hydrazine hydrate and 4-hydroxy-3-methoxybenzaldehyde. Adsorption experiments were conducted in columns packed with the clay at different pH levels, ligand concentrations, and contact times. The equilibrium adsorption data fit the Langmuir, Freundlich and Temkin isotherm models. The maximum adsorption capacity was found to be 5.7347 mg ligand per 1g clay. The highest removal rate of 75.7% occurred at pH 7. Kinetic data followed pseudo
Reduced graphene oxide–CuO nanocomposites for photocatalyticconversion of CO2...Pawan Kumar
Reduced graphene oxide (rGO)–copper oxide nanocomposites are prepared by covalent grafting of CuOnanorods on the rGO skeleton. Chemical and structural features of rGO–CuO nanocomposites are probedby FTIR, XPS, XRD and HRTEM analyses. Photocatalytic potential of rGO–CuO nanocomposites is exploredfor reduction of CO2into the methanol under the visible light irradiation. The breadth of CuO nanorods andthe oxidation state of Cu in the rGO–CuO/Cu2O nanocomposites are systematically varied to investigatetheir photocatalytic activities. The pristine CuO nanorods exhibited very low photocatalytic activity owingto fast recombination of charge carriers and yielded 175 mol g−1methanol, whereas rGO–Cu2O andrGO–CuO exhibited significantly improved photocatalytic activities and yielded five (862 mol g−1) andseven (1228 mol g−1) folds methanol, respectively. The superior photocatalytic activity of CuO in therGO–CuO nanocomposites was attributed to slow recombination of charge carriers and efficient transferof photo-generated electrons through the rGO skeleton. This study further excludes the use of scavengingdonor.
Reduced graphene oxide–CuO nanocomposites for photocatalyticconversion of CO2...Pawan Kumar
tReduced graphene oxide (rGO)–copper oxide nanocomposites are prepared by covalent grafting of CuOnanorods on the rGO skeleton. Chemical and structural features of rGO–CuO nanocomposites are probedby FTIR, XPS, XRD and HRTEM analyses. Photocatalytic potential of rGO–CuO nanocomposites is exploredfor reduction of CO2into the methanol under the visible light irradiation. The breadth of CuO nanorods andthe oxidation state of Cu in the rGO–CuO/Cu2O nanocomposites are systematically varied to investigatetheir photocatalytic activities. The pristine CuO nanorods exhibited very low photocatalytic activity owingto fast recombination of charge carriers and yielded 175 mol g−1methanol, whereas rGO–Cu2O andrGO–CuO exhibited significantly improved photocatalytic activities and yielded five (862 mol g−1) andseven (1228 mol g−1) folds methanol, respectively. The superior photocatalytic activity of CuO in therGO–CuO nanocomposites was attributed to slow recombination of charge carriers and efficient transferof photo-generated electrons through the rGO skeleton. This study further excludes the use of scavengingdonor.
This document describes a final thesis on using the photocatalyst ZnFe2O4/TiO2 to reduce carbon dioxide into methanol under visible light irradiation. The research objectives were to synthesize and characterize ZnFe2O4/TiO2, and evaluate its activity for CO2 conversion. ZnFe2O4 and TiO2 were synthesized separately then coupled using ultrasonication. Characterization methods included FTIR, UV-Vis, TGA, FESEM. Photocatalytic testing showed the maximum methanol yield was 141.22 μmol/gcat.hr using ZnFe2O4/TiO2 with a 1:1 ratio, illuminated for 5.5 hours. Future work could co-synthesize Zn
Electrodeposited nanostructured a-Fe2O3 thin films for solar water splitting:...North Breeze
This document describes a study on the effects of platinum (Pt) doping on the photoelectrochemical performance of nanostructured alpha-iron oxide (α-Fe2O3) thin films deposited via electrodeposition. Un-doped and Pt-doped α-Fe2O3 thin films were characterized using various techniques. The results showed that Pt doping increased the density of small nanoparticles in the films and enhanced the photocurrent density for water splitting by up to a factor of 1.4 compared to un-doped films. The highest photocurrent density of 0.56 mA/cm2 was achieved for a 3% Pt-doped film. Electrochemical impedance analysis also revealed that Pt d
The document summarizes a study on the oriented interfacial microstructures that form in single fiber polymer composites containing graphene fibers. Graphene oxide fibers were produced via wet spinning and then chemically reduced to graphene fibers. These graphene fibers were embedded in isotactic polypropylene (iPP) matrix and subjected to isothermal melt crystallization. Polarized optical microscopy and scanning electron microscopy showed that the iPP crystallizes perpendicularly to the fiber axis, forming a transcrystalline interphase around the graphene fiber. Various factors that influence the transcrystallization process were investigated.
This document summarizes a study that synthesized titanium dioxide-graphene oxide (TiO2-GO) and titanium dioxide-thermally reduced graphene oxide (TiO2-TGO) composites with varying concentrations of GO/TGO. The composites were characterized using various techniques and their photocatalytic activity for degrading phenol in an aqueous solution was evaluated. The TiO2-0.25% TGO composite exhibited the highest photocatalytic activity, attributed to optimal phenol adsorption and reduced electron-hole pair recombination rates. Photocatalytic testing under nitrogen confirmed the role of graphene in transporting and storing electrons, suppressing recombination.
Nitrogen-doped graphene-supported copper complex: a novel photocatalyst for C...Pawan Kumar
A copper(II) complex grafted to nitrogen-doped graphene (GrN700–CuC) was synthesized and then
demonstrated as an efficient photocatalyst for CO2 reduction into methanol under visible light irradiation
using a DMF/water mixture. The chemical and microstructural features of GrN700–CuC nanosheets were
studied by FTIR, XPS, XRD and HRTEM analyses. Owing to its truly heterogeneous nature, GrN700–CuC
could be easily recovered after the photocatalytic reaction and showed efficient recyclability for
subsequent runs.
This document summarizes an article that appeared in a journal published by Elsevier. The attached copy is provided to the author for non-commercial research and education purposes only. Other uses such as reproduction, distribution, selling, or posting to third party websites are prohibited without permission. Authors are generally allowed to post their article in Word or Tex format to their personal or institutional website. Further information about Elsevier's archiving and manuscript policies can be found at the provided URL.
This document summarizes restrictions on sharing and distributing an article from a journal published by Elsevier. It states that the attached copy is for the author's internal non-commercial use, including for instruction and sharing with colleagues. It prohibits other uses without permission, including reproduction, distribution, selling or licensing copies, or posting to personal, institutional or third party websites. It notes that in most cases authors can post their version of the article to their personal website or institutional repository.
This document summarizes restrictions on sharing and distributing an article from a journal published by Elsevier. It states that the attached copy is for the author's internal non-commercial use, including for instruction and sharing with colleagues. It prohibits other uses without permission, including reproduction, distribution, selling or licensing copies, or posting to personal, institutional or third party websites. It notes that in most cases authors can post their version of the article to their personal website or institutional repository.
Energy Conversion on Differential Magnetization of Fe3O4 FerrofluidIJERA Editor
Ferrofluids are stable suspension of ferrimagnetic nanoparticles in hydrocarbon carrier. This fluid is used for harvesting energy using energy conversion device which is presented in this work. The device consists of two chambers, they are hot and cold chamber in which differential magnetization is linked with an inductor. Classically very small value of coupling coefficient |k| has been observed. System configuration shows an emf generation rate of about 44.4µV/K. Presented work shows another way of harvesting energy. Ferrofluid having a particle size of 21nm was used in this case
Visible light driven photocatalytic oxidation of thiols to disulfides using i...Pawan Kumar
The present paper describes the synthesis of graphene oxide immobilized iron phthalocyanine (FePc) for
the photocatalytic oxidation of thiols to disulfides under alkaline free conditions. Iron phthalocyanine
tetrasulfonamide was immobilized on carboxylated graphene oxide supports via covalent attachment.
The loading of FePc on GO nanosheets was confirmed by FTIR, Raman, ICP-AES, UV-Vis and elemental
analyses. The synthesized catalyst was found to be highly efficient for the photo-oxidation of thiols to
disulfides in aqueous medium using molecular oxygen as oxidant under visible light irradiation. The
identification of photo-oxidation products and their quantitative determination was done using GC-MS.
After completion of the reaction, the catalyst was easily recovered by filtration and reused for several
runs without loss in activity and no leaching was observed during the reaction
This document summarizes a study that investigated three copper(II) imidazolate frameworks as photocatalysts for reducing CO2 into methanol under visible light irradiation. The frameworks were synthesized via hydrothermal or precipitation reactions and characterized using various techniques. Their photocatalytic activities for CO2 reduction and methylene blue degradation were evaluated. Results showed the orthorhombic copper(II) imidazolate framework with a band gap of 2.49 eV and green color exhibited the best photocatalytic activity for CO2 reduction, producing 1712.7 μmol/g of methanol over 5 hours. Its synergistic small band gap and crystal structure were determined to be critical factors for its performance.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
More Related Content
Similar to Spatial charge separation on the (110)/(102) facets of cocatalyst-free ZnIn2S4 for the selective conversion of 5-hydroxymethylfurfural to 2,5-diformylfuran
This document summarizes research on the photoelectrocatalytic degradation of Remazol Black B (RBB) dye using nanostructured tungsten oxide (WO3) film electrodes. Key findings include:
1) WO3 film electrodes were found to be better photoelectrocatalysts for degrading RBB dye than titanium dioxide (TiO2) electrodes or molybdenum oxide (MoO3) electrodes with similar surface roughness.
2) Kinetic measurements showed the degradation of RBB on WO3 followed a generalized Langmuir-Hinshelwood model with an overall rate constant of 1.1 × 10−9 mol cm−2s−1.
3
Crimson publishers-Biosynthesis of the Fe3O4 Nanoparticles Using Acacia Nilot...CrimsonpublishersTTEFT
Biosynthesis of the Fe3O4 Nanoparticles Using Acacia Nilotica Leaf Extract and their Effect on Degradation of Congo Red Dye in Aqueous Solution by Vasantha Jyothi NVV* and Venkateswarlu P* in Trends in Textile Engineering & Fashion Technology
Optical Control of Selectivity of High Rate CO2 Photoreduction Via Interband-...Pawan Kumar
Photonic crystals consisting of TiO2 nanotube arrays (PMTiNTs) with periodically modulated diameters were fabricated using a precise charge-controlled pulsed anodization technique. The PMTiNTs were decorated with gold nanoparticles (Au NPs) to form plasmonic photonic crystal photocatalysts (Au-PMTiNTs). A systematic study of CO2 photoreduction performance on as-prepared samples was conducted using different wavelengths and illumination sequences. A remarkable selectivity of the mechanism of CO2 photoreduction could be engineered by merely varying the spectral composition of the illumination sequence. Under AM1.5 G simulated sunlight (pathway#1), the Au-PMTiNTs produced methane (302 µmol h-1) from CO2 with high selectivity (89.3%). When also illuminated by a UV-poor white lamp (pathway#2), the Au-PMTiNTs produced formaldehyde (420 µmol h-1) and carbon monoxide (323 µmol h-1) with almost no methane evolved. We confirmed the photoreduction results by 13C isotope labeling experiments using GC-MS. These results point to optical control of the selectivity of high-rate CO2 photoreduction through selection of one of two different mechanistic pathways. Pathway#1 implicates electron-hole pairs generated through interband transitions in TiO2 and Au as the primary active species responsible for reducing CO2 to methane. Pathway#2 involves excitation of both TiO2 and surface plasmons in Au. Hot electrons produced by plasmon damping and photogenerated holes in TiO2 proceed to reduce CO2 to HCHO and CO through a plasmonic Z-scheme.
Surface fluorination of α-Fe2O3 using selectfluor for enhancement in photoele...Devika Laishram
Fluorinated α-Fe2O3 nanostructures are synthesized via a facile hydrothermal route using Selectfluor™ (F-TEDA)
as a fluorinating as well as growth directing agent. The addition of incrementally increasing amount of F-TEDA
to Fe precursor under hydrothermal conditions resulted in preferential growth of α-Fe2O3 along (110) orientation with respect to (104) direction by ~ 35%, the former being important for enhanced charge transport.
On increasing fluorination, the heirarchical dendritic-type α-Fe2O3 changes to a snow-flake type structure (FTEDA-20%) anisotropically growing along the six directions however, at higher F-TEDA concentrations (≥
30%), loosely held particulate aggregates are seen to be formed. The X-Ray Photoelectron Spectroscopy (XPS)
suggest the maximum fluorinarion of α-Fe2O3 at 1.21 at% in 30% F-TEDA. Further, optical absorption studies
reveal reduction in optical band gap from 2.10 eV in case of pristine to 1.95 eV for fluorinated α-Fe2O3. A
photoanode made by taking 20% fluorinated α-Fe2O3 in a ratio of 10:90 with respect to TiO2 (P-25) showed
improved performance in dye sensitized solar cells with an increase in efficiency by ~16% in comparision to that
of pristine Fe2O3 and TiO2. Furthermore, anode consisting of thin films of fluorinated α-Fe2O3 on FTO also
exhibit enhanced current density on illumination of ~100 W/m2
. The increase in photoelectrochemical activity
seems to be due to the combination of two factors namely preferential growth of α-Fe2O3 along (110) direction
resulting in an improved charge transfer efficiency and reduced recombination losses due to the presence of
fluorine.
Graphene oxide immobilized copper phthalocyanine tetrasulphonamide: the first...Pawan Kumar
The first successful synthesis of DMC directly from methanol and carbon dioxide using a heterogenized
homogeneous graphene oxide immobilized copper phthalocyanine tetrasulphonamide catalyst in the
presence of N,N0-dicyclohexylcarbodiimide (DCC) as a dehydrating agent is described. The presence of a
dehydrating agent was found to be vital and in its absence the yield of DMC was found to be decreased
significantly. Under the optimized reaction conditions, the maximum yield of DMC reaches up to 13.3%.
Although the homogeneous copper phthalocyanine tetrasulphonamide catalyst provided a little higher
yield of DMC (14.2%), the facile recovery and recycling ability of the heterogeneous catalyst make the
developed method more attractive from environmental and economical viewpoints.
This document summarizes a study on the adsorption of a Schiff base ligand onto granulated initiated calcined Iraqi montmorillonite clay via columnar method. The ligand was synthesized from the condensation reaction of hydrazine hydrate and 4-hydroxy-3-methoxybenzaldehyde. Adsorption experiments were conducted in columns packed with the clay at different pH levels, ligand concentrations, and contact times. The equilibrium adsorption data fit the Langmuir, Freundlich and Temkin isotherm models. The maximum adsorption capacity was found to be 5.7347 mg ligand per 1g clay. The highest removal rate of 75.7% occurred at pH 7. Kinetic data followed pseudo
Reduced graphene oxide–CuO nanocomposites for photocatalyticconversion of CO2...Pawan Kumar
Reduced graphene oxide (rGO)–copper oxide nanocomposites are prepared by covalent grafting of CuOnanorods on the rGO skeleton. Chemical and structural features of rGO–CuO nanocomposites are probedby FTIR, XPS, XRD and HRTEM analyses. Photocatalytic potential of rGO–CuO nanocomposites is exploredfor reduction of CO2into the methanol under the visible light irradiation. The breadth of CuO nanorods andthe oxidation state of Cu in the rGO–CuO/Cu2O nanocomposites are systematically varied to investigatetheir photocatalytic activities. The pristine CuO nanorods exhibited very low photocatalytic activity owingto fast recombination of charge carriers and yielded 175 mol g−1methanol, whereas rGO–Cu2O andrGO–CuO exhibited significantly improved photocatalytic activities and yielded five (862 mol g−1) andseven (1228 mol g−1) folds methanol, respectively. The superior photocatalytic activity of CuO in therGO–CuO nanocomposites was attributed to slow recombination of charge carriers and efficient transferof photo-generated electrons through the rGO skeleton. This study further excludes the use of scavengingdonor.
Reduced graphene oxide–CuO nanocomposites for photocatalyticconversion of CO2...Pawan Kumar
tReduced graphene oxide (rGO)–copper oxide nanocomposites are prepared by covalent grafting of CuOnanorods on the rGO skeleton. Chemical and structural features of rGO–CuO nanocomposites are probedby FTIR, XPS, XRD and HRTEM analyses. Photocatalytic potential of rGO–CuO nanocomposites is exploredfor reduction of CO2into the methanol under the visible light irradiation. The breadth of CuO nanorods andthe oxidation state of Cu in the rGO–CuO/Cu2O nanocomposites are systematically varied to investigatetheir photocatalytic activities. The pristine CuO nanorods exhibited very low photocatalytic activity owingto fast recombination of charge carriers and yielded 175 mol g−1methanol, whereas rGO–Cu2O andrGO–CuO exhibited significantly improved photocatalytic activities and yielded five (862 mol g−1) andseven (1228 mol g−1) folds methanol, respectively. The superior photocatalytic activity of CuO in therGO–CuO nanocomposites was attributed to slow recombination of charge carriers and efficient transferof photo-generated electrons through the rGO skeleton. This study further excludes the use of scavengingdonor.
This document describes a final thesis on using the photocatalyst ZnFe2O4/TiO2 to reduce carbon dioxide into methanol under visible light irradiation. The research objectives were to synthesize and characterize ZnFe2O4/TiO2, and evaluate its activity for CO2 conversion. ZnFe2O4 and TiO2 were synthesized separately then coupled using ultrasonication. Characterization methods included FTIR, UV-Vis, TGA, FESEM. Photocatalytic testing showed the maximum methanol yield was 141.22 μmol/gcat.hr using ZnFe2O4/TiO2 with a 1:1 ratio, illuminated for 5.5 hours. Future work could co-synthesize Zn
Electrodeposited nanostructured a-Fe2O3 thin films for solar water splitting:...North Breeze
This document describes a study on the effects of platinum (Pt) doping on the photoelectrochemical performance of nanostructured alpha-iron oxide (α-Fe2O3) thin films deposited via electrodeposition. Un-doped and Pt-doped α-Fe2O3 thin films were characterized using various techniques. The results showed that Pt doping increased the density of small nanoparticles in the films and enhanced the photocurrent density for water splitting by up to a factor of 1.4 compared to un-doped films. The highest photocurrent density of 0.56 mA/cm2 was achieved for a 3% Pt-doped film. Electrochemical impedance analysis also revealed that Pt d
The document summarizes a study on the oriented interfacial microstructures that form in single fiber polymer composites containing graphene fibers. Graphene oxide fibers were produced via wet spinning and then chemically reduced to graphene fibers. These graphene fibers were embedded in isotactic polypropylene (iPP) matrix and subjected to isothermal melt crystallization. Polarized optical microscopy and scanning electron microscopy showed that the iPP crystallizes perpendicularly to the fiber axis, forming a transcrystalline interphase around the graphene fiber. Various factors that influence the transcrystallization process were investigated.
This document summarizes a study that synthesized titanium dioxide-graphene oxide (TiO2-GO) and titanium dioxide-thermally reduced graphene oxide (TiO2-TGO) composites with varying concentrations of GO/TGO. The composites were characterized using various techniques and their photocatalytic activity for degrading phenol in an aqueous solution was evaluated. The TiO2-0.25% TGO composite exhibited the highest photocatalytic activity, attributed to optimal phenol adsorption and reduced electron-hole pair recombination rates. Photocatalytic testing under nitrogen confirmed the role of graphene in transporting and storing electrons, suppressing recombination.
Nitrogen-doped graphene-supported copper complex: a novel photocatalyst for C...Pawan Kumar
A copper(II) complex grafted to nitrogen-doped graphene (GrN700–CuC) was synthesized and then
demonstrated as an efficient photocatalyst for CO2 reduction into methanol under visible light irradiation
using a DMF/water mixture. The chemical and microstructural features of GrN700–CuC nanosheets were
studied by FTIR, XPS, XRD and HRTEM analyses. Owing to its truly heterogeneous nature, GrN700–CuC
could be easily recovered after the photocatalytic reaction and showed efficient recyclability for
subsequent runs.
This document summarizes an article that appeared in a journal published by Elsevier. The attached copy is provided to the author for non-commercial research and education purposes only. Other uses such as reproduction, distribution, selling, or posting to third party websites are prohibited without permission. Authors are generally allowed to post their article in Word or Tex format to their personal or institutional website. Further information about Elsevier's archiving and manuscript policies can be found at the provided URL.
This document summarizes restrictions on sharing and distributing an article from a journal published by Elsevier. It states that the attached copy is for the author's internal non-commercial use, including for instruction and sharing with colleagues. It prohibits other uses without permission, including reproduction, distribution, selling or licensing copies, or posting to personal, institutional or third party websites. It notes that in most cases authors can post their version of the article to their personal website or institutional repository.
This document summarizes restrictions on sharing and distributing an article from a journal published by Elsevier. It states that the attached copy is for the author's internal non-commercial use, including for instruction and sharing with colleagues. It prohibits other uses without permission, including reproduction, distribution, selling or licensing copies, or posting to personal, institutional or third party websites. It notes that in most cases authors can post their version of the article to their personal website or institutional repository.
Energy Conversion on Differential Magnetization of Fe3O4 FerrofluidIJERA Editor
Ferrofluids are stable suspension of ferrimagnetic nanoparticles in hydrocarbon carrier. This fluid is used for harvesting energy using energy conversion device which is presented in this work. The device consists of two chambers, they are hot and cold chamber in which differential magnetization is linked with an inductor. Classically very small value of coupling coefficient |k| has been observed. System configuration shows an emf generation rate of about 44.4µV/K. Presented work shows another way of harvesting energy. Ferrofluid having a particle size of 21nm was used in this case
Visible light driven photocatalytic oxidation of thiols to disulfides using i...Pawan Kumar
The present paper describes the synthesis of graphene oxide immobilized iron phthalocyanine (FePc) for
the photocatalytic oxidation of thiols to disulfides under alkaline free conditions. Iron phthalocyanine
tetrasulfonamide was immobilized on carboxylated graphene oxide supports via covalent attachment.
The loading of FePc on GO nanosheets was confirmed by FTIR, Raman, ICP-AES, UV-Vis and elemental
analyses. The synthesized catalyst was found to be highly efficient for the photo-oxidation of thiols to
disulfides in aqueous medium using molecular oxygen as oxidant under visible light irradiation. The
identification of photo-oxidation products and their quantitative determination was done using GC-MS.
After completion of the reaction, the catalyst was easily recovered by filtration and reused for several
runs without loss in activity and no leaching was observed during the reaction
This document summarizes a study that investigated three copper(II) imidazolate frameworks as photocatalysts for reducing CO2 into methanol under visible light irradiation. The frameworks were synthesized via hydrothermal or precipitation reactions and characterized using various techniques. Their photocatalytic activities for CO2 reduction and methylene blue degradation were evaluated. Results showed the orthorhombic copper(II) imidazolate framework with a band gap of 2.49 eV and green color exhibited the best photocatalytic activity for CO2 reduction, producing 1712.7 μmol/g of methanol over 5 hours. Its synergistic small band gap and crystal structure were determined to be critical factors for its performance.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Similar to Spatial charge separation on the (110)/(102) facets of cocatalyst-free ZnIn2S4 for the selective conversion of 5-hydroxymethylfurfural to 2,5-diformylfuran (20)
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Recent advancements in tuning the electronic structures of transitional metal...Pawan Kumar
The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.
Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.
Multifunctional carbon nitride nanoarchitectures for catalysisPawan Kumar
Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.
Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Ma...Pawan Kumar
The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.
Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Wate...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for...Pawan Kumar
This document summarizes a study that investigated copper single atom catalysts supported on two-dimensional carbon nitride materials for enhancing the electrochemical reduction of carbon dioxide to methane. Specifically, copper ions were incorporated into the nanoporous structures of poly(heptazine imide) and poly(triazine imide) using a room temperature ion exchange process. This allowed for high loading densities of isolated copper sites. The proximity of copper atoms within the nanopores was found to enable cooperative catalysis that boosted the selectivity and efficiency of the multi-electron conversion of CO2 to CH4. Density functional theory calculations helped explain how the copper-copper distance and coordination environment modulated the binding of reaction intermediates. Optimized copper loading in the
Bioinspired multimetal electrocatalyst for selective methane oxidationPawan Kumar
Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.
Authoring a personal GPT for your research and practice: How we created the Q...Leonel Morgado
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
(June 12, 2024) Webinar: Development of PET theranostics targeting the molecu...Scintica Instrumentation
Targeting Hsp90 and its pathogen Orthologs with Tethered Inhibitors as a Diagnostic and Therapeutic Strategy for cancer and infectious diseases with Dr. Timothy Haystead.
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
Travis Hills of MN is Making Clean Water Accessible to All Through High Flux ...Travis Hills MN
By harnessing the power of High Flux Vacuum Membrane Distillation, Travis Hills from MN envisions a future where clean and safe drinking water is accessible to all, regardless of geographical location or economic status.
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Immersive Learning That Works: Research Grounding and Paths ForwardLeonel Morgado
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
Spatial charge separation on the (110)/(102) facets of cocatalyst-free ZnIn2S4 for the selective conversion of 5-hydroxymethylfurfural to 2,5-diformylfuran