Smart Remote
•
2 likes•237 views
This document describes a project to create a smart remote control using a smartphone. The smart remote would replace conventional remotes for devices like a satellite receiver and DVD player. It would also enable electronic guest notification for home security and basic home automation controls. The smart remote system uses Bluetooth to connect a smartphone app to a microcontroller-based circuit board. The circuit board then sends infrared signals similar to conventional remotes and can detect motion with a PIR sensor. The goal is to integrate remote controls for multiple devices into a single smartphone app for simple and cost-effective home automation and security.
Report
Share
Report
Share
Download to read offline
Recommended
Buildtrack Apartment automaton
If you live in an apartment, perhaps you’ve heard the terms smart home and home automation and shrugged them off as the realm of suburban homeowners. Today’s smart home devices, however, are being designed with portability in mind, making them perfect for renters. If you want to lower your utility bills, increase your safety and make your apartment more comfortable, it’s time to tune in to the smart home revolution.
Buildtrack Wireless Occupancy Sensors
Wireless sensors can help reduce energy bills by controlling electrical switches and devices without wiring. The sensors use wireless communication to transmit signals to actuator nodes behind switches. This allows single sensors to control multiple switches and devices located in different areas. Wireless sensors provide benefits like easy installation within an hour without disrupting operations, maintaining aesthetics by eliminating wires, and variable control of different devices. They are suited for situations with intermittent occupancy like offices, classrooms, and warehouses.
BuildTrack Case Study - 2BHK Apartment Automation
Wifi Home Automation system (retrofit) implemented in a 2BHK apartment. This is useful for customers who wants to automate with the existing set up
205044990 M Mphego Presentation
This document outlines an engineering project to design a smart home automation system using a Raspberry Pi and Arduino for voice recognition. It discusses the background and problem statement, presenting a need for low-cost home automation without extensive infrastructure changes. The project aims to develop such a system using wireless communication between a Raspberry Pi and sensors to control and monitor devices. It then covers the design, results showing the concept was well received, budget, and schedule, concluding the low-cost system is flexible and offers advantages over competitors.
Network generations
This document appears to be a project report submitted for the requirements of a Bachelor of Technology degree in Electronic and Communication Engineering. It outlines a smart wall switch project that uses an Arduino, Wi-Fi module, relays, buttons, DHT11 sensor, and Blynk app to remotely control household appliances via a mobile phone. The objectives are to create a low-cost, reliable, and scalable smart switch. It then details the various components, block diagram, working, advantages, applications, and concludes more development is needed for commercial use.
SMARTHOME
The document summarizes a project presentation on a home automation system using Android devices. It was presented by five students under the supervision of Prof. Ruby Mishra at Kalinga Institute of Industrial Technology. The presentation covers the introduction, block diagram, components required, system design, software used, advantages, disadvantages, applications, and conclusion of the home automation project.
Home automation
This document presents a home automation project that aims to develop a home automation system controlled by an Android application. The project was completed by Ayan Mondal for their diploma in ECE. The objectives are to create a centralized wireless control system for a smart home. A feasibility study found the technical risks to be moderate and related to security and software. The total estimated cost is Rs. 1,207. The system will use an Android app, BLYNK, and IFTTT for remote control of lights, appliances, and security through a Node MCU and relays. Future applications could include refrigerator communication and home robotics.
Home automation
The document discusses home automation and its benefits. It introduces home automation as using technology to control home appliances and features remotely. It lists some key benefits as improving security through remote surveillance and central locking, increasing personal ease by controlling devices from a phone, and reducing energy costs by automating HVAC and lighting systems. The document then outlines some implementation methods using Bluetooth and Wi-Fi modules before discussing threats to home automation systems and concluding that while the project achieved controlling equipment with a phone, greater development is still needed for truly smart homes.
Recommended
Buildtrack Apartment automaton
If you live in an apartment, perhaps you’ve heard the terms smart home and home automation and shrugged them off as the realm of suburban homeowners. Today’s smart home devices, however, are being designed with portability in mind, making them perfect for renters. If you want to lower your utility bills, increase your safety and make your apartment more comfortable, it’s time to tune in to the smart home revolution.
Buildtrack Wireless Occupancy Sensors
Wireless sensors can help reduce energy bills by controlling electrical switches and devices without wiring. The sensors use wireless communication to transmit signals to actuator nodes behind switches. This allows single sensors to control multiple switches and devices located in different areas. Wireless sensors provide benefits like easy installation within an hour without disrupting operations, maintaining aesthetics by eliminating wires, and variable control of different devices. They are suited for situations with intermittent occupancy like offices, classrooms, and warehouses.
BuildTrack Case Study - 2BHK Apartment Automation
Wifi Home Automation system (retrofit) implemented in a 2BHK apartment. This is useful for customers who wants to automate with the existing set up
205044990 M Mphego Presentation
This document outlines an engineering project to design a smart home automation system using a Raspberry Pi and Arduino for voice recognition. It discusses the background and problem statement, presenting a need for low-cost home automation without extensive infrastructure changes. The project aims to develop such a system using wireless communication between a Raspberry Pi and sensors to control and monitor devices. It then covers the design, results showing the concept was well received, budget, and schedule, concluding the low-cost system is flexible and offers advantages over competitors.
Network generations
This document appears to be a project report submitted for the requirements of a Bachelor of Technology degree in Electronic and Communication Engineering. It outlines a smart wall switch project that uses an Arduino, Wi-Fi module, relays, buttons, DHT11 sensor, and Blynk app to remotely control household appliances via a mobile phone. The objectives are to create a low-cost, reliable, and scalable smart switch. It then details the various components, block diagram, working, advantages, applications, and concludes more development is needed for commercial use.
SMARTHOME
The document summarizes a project presentation on a home automation system using Android devices. It was presented by five students under the supervision of Prof. Ruby Mishra at Kalinga Institute of Industrial Technology. The presentation covers the introduction, block diagram, components required, system design, software used, advantages, disadvantages, applications, and conclusion of the home automation project.
Home automation
This document presents a home automation project that aims to develop a home automation system controlled by an Android application. The project was completed by Ayan Mondal for their diploma in ECE. The objectives are to create a centralized wireless control system for a smart home. A feasibility study found the technical risks to be moderate and related to security and software. The total estimated cost is Rs. 1,207. The system will use an Android app, BLYNK, and IFTTT for remote control of lights, appliances, and security through a Node MCU and relays. Future applications could include refrigerator communication and home robotics.
Home automation
The document discusses home automation and its benefits. It introduces home automation as using technology to control home appliances and features remotely. It lists some key benefits as improving security through remote surveillance and central locking, increasing personal ease by controlling devices from a phone, and reducing energy costs by automating HVAC and lighting systems. The document then outlines some implementation methods using Bluetooth and Wi-Fi modules before discussing threats to home automation systems and concluding that while the project achieved controlling equipment with a phone, greater development is still needed for truly smart homes.
Voice controlled home appliances
This voice controller for home appliances project is used to control all household appliances through a voice controlled Android application.
Home automation
home automation is smart home which is basic need of today lifestyle from we are trying to solve this problem.
Voice recognition based home automation system for paralyzed people
Automation is a trending topic in 21st century making an important role in our daily lives. Automation reduces the human labor, time, effort and some human errors. The key objective of our project is to design a system for physically handicapped persons to control and operate home appliances and their own wheel chair by their own voice. Both these qualities are present in our project which has the capability to replace existing technologies. the design of the low cost voice recognition based home automation system for the physically challenged people suffering from quadriplegia or paraplegia (who cannot move their limbs but can speak and listen) to control the various home appliances just by his/her voice commands according to their need and comfort. We also implemented a messaging concept. In this whenever the patient or the person needs a help, if he/she pronounce as help a message will be sent to their respective represented family member. The resultant system can provide a great assistance to the physically handicapped people without any need of third person.
Home automation system
This document summarizes a student project on home automation. It includes a list of student names and introduction explaining the goal of controlling home appliances via Bluetooth from a mobile phone. It describes the components used including an Arduino Uno microcontroller, Bluetooth module, relays, alternator, and DC motor. The code, transmitter unit, working procedure, advantages of remote access and assistance for disabled users, applications, problems faced, and conclusion are outlined over multiple pages.
Citylum CircaLED product features list for project specification
This document lists product features for a project specification including: autonomous part night dimming that uses a preset dimming scheme based on previous night durations; autonomous tunable-white control using a preset scheme based on part night dimming; constant light output that gradually increases luminaire power to maintain lumen output and energy savings over years; adjustable output current to set the LED's default current; temperature and consumption measurement and logging; very low output ripple current to eliminate flickering affecting security cameras; NFC programming interface for contact-less and safe programming from a smartphone; a free Android application without registration; and energy savings calculation in the Android app.
Home Automation using a Cell Phone
This document outlines a home automation system using wireless control that can be built for 15,000-20,000 rupees. The system allows remote and automatic control of devices in the home using a cell phone. It utilizes a Raspberry Pi, Wi-Fi router, relays, electronic switches and programming languages to control devices from anywhere. The home automation industry is growing and was worth 19.52 billion in 2012 and projected to be worth 48.02 billion by 2018, providing motivation for the project.
Home automation
This document describes a home automation system using Bluetooth that allows controlling appliances via a smartphone. The system uses an Arduino Uno microcontroller connected to an HC-05 Bluetooth module and 4-channel relay board. An Android app sends control signals over Bluetooth to the Arduino, which triggers relays connected to devices. The system provides a low-cost way to remotely control electrical systems like lights and AC in the home.
Home automation using blynk
This document outlines a project to develop a home automation system using a Node MCU board that can be remotely controlled from an Android smartphone. The system allows users to control electrical appliances and switches in their home from their phone. It provides a modern solution for home automation that makes it easier for users to control devices anywhere in their home. The key components outlined are the Node MCU, relays, batteries, LED bulbs, Arduino IDE, ESP8266 library, Blynk libraries, and Blynk app. It provides step-by-step instructions on setting up the circuit, configuring the software, uploading code, and testing the system.
Home automation in kerala ,home automation in calicut , home automation
Home automation in kerala ,home automation in calicut , home automation
Casero technologies, a leading provider of personalized automation and control solutions, allows you to control virtually any device in a home or business, automatically.The company mission is to deliver an elegant and more affordable way to control and automate lighting, gate,music, video, security and energy in a single room or throughout the entire home.
Bluetooth based Home Automation
Seminar PPT on Bluetooth based Home Automation for controlling home appliances using bluetooth supported devices.
Home Automation System using ZigBee and PandaBoard as a Gateway (HAS-ZP)
Today’s homes have as many wires as the number of devices to control. Home
automation using ZigBee and PandaBoard as a gateway does away with the need for
separate wires and even remotes. The wireless home area network doesn’t require line-of-
sight communication. The HAS-ZP is a wireless home automation system that can be
implemented in existing home environments, without any changes in the infrastructure.
Home Automation lets the user control the home appliances from his or her smart-phone or
laptop. The assigned actions can happen depending on time or other sensor readings such as
light, temperature or sound from any connected device in the Home Automation network.
With the help of PandaBoard, currently working as gateway, we can control, command,
operate and observe the end devices. Here we are considering end devices like fan, bulb, TV,
Music System, doors, windows etc. with the single gateway, the system can control entire
home irrespective of number of rooms or boundaries where each room will be connected
with single receiver.
Presentation on bluetooth controlled electronic home appliances
This project proposes a system to control electronic home appliances using an Android device through Bluetooth. An Android application would be installed on a mobile phone or tablet to send commands via Bluetooth to a microcontroller. The microcontroller is interfaced with electrical loads like lights and motors and would switch the loads on and off based on the commands received from the Android device. The system aims to provide remote control of appliances using a smartphone without needing to be physically present near the control unit.
Home automation system
Its a power point presentation On Home Automation System using Android Application Via Bluetooth Module.
Smart Home Automation by LDCE student
This document provides an overview and guide for a smart home automation project that allows users to control eight home appliances remotely using a cell phone. The system uses DTMF technology to decode tones entered on the phone and send commands to a microcontroller to trigger relays and control devices. It has applications for remotely controlling security systems, lights, fans, kitchen appliances and HVAC from any location with a mobile network. The project aims to provide convenience to users who cannot physically access devices and has potential for expansion to more appliances and incorporating voice and feedback features.
Remote-Monitoring and Energy-Saving Room Architecture with Security System ba...
Now-a-days we are in need to avoid wastage of power in home. As more and more consumer electronics and home appliances are deployed and the size of them is becoming large, power consumption in home area tends to grow. Moreover, useless power consumption occurs during day time and also when the human being is not present in the room. So through this project we are overcoming the above mentioned threat by using various sensors to enhance security and to save power.
In this system, zigbee as wired or wireless networks are used to transfer the control information and the measured power. zigbee is a low-cost, low-power, wireless mesh networking proprietary standard. The low cost allows the technology to be widely deployed in wireless control and monitoring applications, the low power-usage allows longer life with smaller batteries, and the mesh networking provides high reliability and larger range. The user can also check the power consumption of the home appliances through the remote control unit.
The rule of thumb for the length a data cable depends on speed of the data, quality of the cable. Zigbee transmitter transmits the signal through a wireless communication and it covers a distance of about 10-100 meters. A liquid crystal display (LCD) is a thin, flat panel used for electronically displaying information such as text, images, and moving pictures. LCD is used to represent the home appliance which is working on the receiver side.
voice recognition based home automation system using arm-7
This document describes a voice recognition based wireless home automation system using an ARM-7 microcontroller. The system allows users to control lights, fans, air conditioners, security cameras and other devices through voice commands to the portable unit. The system is designed to be easy to install, configure, run and maintain for elderly and disabled users. It uses an ARM-7 microcontroller for data communication and voice recognition between connected devices in the home. The hardware components include an ARM development board, relay circuit, USB programmer and connecting wires. The system is programmed using embedded C on a KEIL IDE and can be applied in homes, industries and colleges to control appliances and machines through voice.
Microcontroller Assignment Help
Microcontroller is a small computer which is designed to carry out the embedded system operations in motor vehicles , vending machines , mobile radio transceiver etc. Processor , memory and programmable input/output peripherals are the parts of the microcontroller. Features of microcontroller are :
Cost of microcontroller is less.
Availability of large amount of ROM and RAM .
Number of input /output port and timers are maximum.
Process of upgrading is simple.
It includes software development tools likes compiler , debuggers , emulator , simulator etc .
Bluetooth based home automation using Arduino UNO
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Wireless home appliance control using arduino and bluetooth module
This document describes a wireless home automation system using an Arduino, Bluetooth module, and relay board. A group of students built a system to control appliances remotely using a smartphone app. The system allows controlling devices from a distance wirelessly and provides a low-cost way to create a smart home network where appliances can communicate with each other. It connects an Arduino board with a Bluetooth module to a relay board to control AC loads like lights, fans and switches remotely through an Android app.
A1 Presentation
This document describes a microcontroller-based intelligent home security system using wireless sensor networks and GSM. The system detects intruders using infrared, temperature, and light sensors and alerts the homeowner via text message if any sensors are triggered. It uses an AT89S52 microcontroller to process sensor data and an attached GSM module to send notifications. The system is designed to provide low-cost home security and real-time intruder alerts.
AiN Live and learn Conference - 2017
IPDATATEL provides alarm communication devices that enable alarm systems to use cellular and internet connections. Their products include dual-path communicators with cellular and internet connectivity, single-path cellular communicators, and Z-Wave controllers. IPDATATEL devices reduce costs for alarm dealers by enabling remote programming which reduces truck rolls by up to 75%. They also provide mobile apps for remote arming/disarming and smart home control. IPDATATEL's goal is to help alarm dealers increase their business and profits while adapting to changes in communication technology.
Security system using Arduino
The objective of this project is to design and develop a wireless communication link to monitor our organizations that require high security like Banks , Offices etc.
More Related Content
What's hot
Voice controlled home appliances
This voice controller for home appliances project is used to control all household appliances through a voice controlled Android application.
Home automation
home automation is smart home which is basic need of today lifestyle from we are trying to solve this problem.
Voice recognition based home automation system for paralyzed people
Automation is a trending topic in 21st century making an important role in our daily lives. Automation reduces the human labor, time, effort and some human errors. The key objective of our project is to design a system for physically handicapped persons to control and operate home appliances and their own wheel chair by their own voice. Both these qualities are present in our project which has the capability to replace existing technologies. the design of the low cost voice recognition based home automation system for the physically challenged people suffering from quadriplegia or paraplegia (who cannot move their limbs but can speak and listen) to control the various home appliances just by his/her voice commands according to their need and comfort. We also implemented a messaging concept. In this whenever the patient or the person needs a help, if he/she pronounce as help a message will be sent to their respective represented family member. The resultant system can provide a great assistance to the physically handicapped people without any need of third person.
Home automation system
This document summarizes a student project on home automation. It includes a list of student names and introduction explaining the goal of controlling home appliances via Bluetooth from a mobile phone. It describes the components used including an Arduino Uno microcontroller, Bluetooth module, relays, alternator, and DC motor. The code, transmitter unit, working procedure, advantages of remote access and assistance for disabled users, applications, problems faced, and conclusion are outlined over multiple pages.
Citylum CircaLED product features list for project specification
This document lists product features for a project specification including: autonomous part night dimming that uses a preset dimming scheme based on previous night durations; autonomous tunable-white control using a preset scheme based on part night dimming; constant light output that gradually increases luminaire power to maintain lumen output and energy savings over years; adjustable output current to set the LED's default current; temperature and consumption measurement and logging; very low output ripple current to eliminate flickering affecting security cameras; NFC programming interface for contact-less and safe programming from a smartphone; a free Android application without registration; and energy savings calculation in the Android app.
Home Automation using a Cell Phone
This document outlines a home automation system using wireless control that can be built for 15,000-20,000 rupees. The system allows remote and automatic control of devices in the home using a cell phone. It utilizes a Raspberry Pi, Wi-Fi router, relays, electronic switches and programming languages to control devices from anywhere. The home automation industry is growing and was worth 19.52 billion in 2012 and projected to be worth 48.02 billion by 2018, providing motivation for the project.
Home automation
This document describes a home automation system using Bluetooth that allows controlling appliances via a smartphone. The system uses an Arduino Uno microcontroller connected to an HC-05 Bluetooth module and 4-channel relay board. An Android app sends control signals over Bluetooth to the Arduino, which triggers relays connected to devices. The system provides a low-cost way to remotely control electrical systems like lights and AC in the home.
Home automation using blynk
This document outlines a project to develop a home automation system using a Node MCU board that can be remotely controlled from an Android smartphone. The system allows users to control electrical appliances and switches in their home from their phone. It provides a modern solution for home automation that makes it easier for users to control devices anywhere in their home. The key components outlined are the Node MCU, relays, batteries, LED bulbs, Arduino IDE, ESP8266 library, Blynk libraries, and Blynk app. It provides step-by-step instructions on setting up the circuit, configuring the software, uploading code, and testing the system.
Home automation in kerala ,home automation in calicut , home automation
Home automation in kerala ,home automation in calicut , home automation
Casero technologies, a leading provider of personalized automation and control solutions, allows you to control virtually any device in a home or business, automatically.The company mission is to deliver an elegant and more affordable way to control and automate lighting, gate,music, video, security and energy in a single room or throughout the entire home.
Bluetooth based Home Automation
Seminar PPT on Bluetooth based Home Automation for controlling home appliances using bluetooth supported devices.
Home Automation System using ZigBee and PandaBoard as a Gateway (HAS-ZP)
Today’s homes have as many wires as the number of devices to control. Home
automation using ZigBee and PandaBoard as a gateway does away with the need for
separate wires and even remotes. The wireless home area network doesn’t require line-of-
sight communication. The HAS-ZP is a wireless home automation system that can be
implemented in existing home environments, without any changes in the infrastructure.
Home Automation lets the user control the home appliances from his or her smart-phone or
laptop. The assigned actions can happen depending on time or other sensor readings such as
light, temperature or sound from any connected device in the Home Automation network.
With the help of PandaBoard, currently working as gateway, we can control, command,
operate and observe the end devices. Here we are considering end devices like fan, bulb, TV,
Music System, doors, windows etc. with the single gateway, the system can control entire
home irrespective of number of rooms or boundaries where each room will be connected
with single receiver.
Presentation on bluetooth controlled electronic home appliances
This project proposes a system to control electronic home appliances using an Android device through Bluetooth. An Android application would be installed on a mobile phone or tablet to send commands via Bluetooth to a microcontroller. The microcontroller is interfaced with electrical loads like lights and motors and would switch the loads on and off based on the commands received from the Android device. The system aims to provide remote control of appliances using a smartphone without needing to be physically present near the control unit.
Home automation system
Its a power point presentation On Home Automation System using Android Application Via Bluetooth Module.
Smart Home Automation by LDCE student
This document provides an overview and guide for a smart home automation project that allows users to control eight home appliances remotely using a cell phone. The system uses DTMF technology to decode tones entered on the phone and send commands to a microcontroller to trigger relays and control devices. It has applications for remotely controlling security systems, lights, fans, kitchen appliances and HVAC from any location with a mobile network. The project aims to provide convenience to users who cannot physically access devices and has potential for expansion to more appliances and incorporating voice and feedback features.
Remote-Monitoring and Energy-Saving Room Architecture with Security System ba...
Now-a-days we are in need to avoid wastage of power in home. As more and more consumer electronics and home appliances are deployed and the size of them is becoming large, power consumption in home area tends to grow. Moreover, useless power consumption occurs during day time and also when the human being is not present in the room. So through this project we are overcoming the above mentioned threat by using various sensors to enhance security and to save power.
In this system, zigbee as wired or wireless networks are used to transfer the control information and the measured power. zigbee is a low-cost, low-power, wireless mesh networking proprietary standard. The low cost allows the technology to be widely deployed in wireless control and monitoring applications, the low power-usage allows longer life with smaller batteries, and the mesh networking provides high reliability and larger range. The user can also check the power consumption of the home appliances through the remote control unit.
The rule of thumb for the length a data cable depends on speed of the data, quality of the cable. Zigbee transmitter transmits the signal through a wireless communication and it covers a distance of about 10-100 meters. A liquid crystal display (LCD) is a thin, flat panel used for electronically displaying information such as text, images, and moving pictures. LCD is used to represent the home appliance which is working on the receiver side.
voice recognition based home automation system using arm-7
This document describes a voice recognition based wireless home automation system using an ARM-7 microcontroller. The system allows users to control lights, fans, air conditioners, security cameras and other devices through voice commands to the portable unit. The system is designed to be easy to install, configure, run and maintain for elderly and disabled users. It uses an ARM-7 microcontroller for data communication and voice recognition between connected devices in the home. The hardware components include an ARM development board, relay circuit, USB programmer and connecting wires. The system is programmed using embedded C on a KEIL IDE and can be applied in homes, industries and colleges to control appliances and machines through voice.
Microcontroller Assignment Help
Microcontroller is a small computer which is designed to carry out the embedded system operations in motor vehicles , vending machines , mobile radio transceiver etc. Processor , memory and programmable input/output peripherals are the parts of the microcontroller. Features of microcontroller are :
Cost of microcontroller is less.
Availability of large amount of ROM and RAM .
Number of input /output port and timers are maximum.
Process of upgrading is simple.
It includes software development tools likes compiler , debuggers , emulator , simulator etc .
Bluetooth based home automation using Arduino UNO
This document presents an Arduino-based home automation system using Bluetooth. It introduces the project, includes a block diagram, lists the hardware requirements, and describes the process for making a relay circuit. It explains the components used - Arduino UNO, Bluetooth module, relay, transistors and resistors. Software used is Arduino IDE. Advantages are convenience and energy savings. Disadvantages include limited range and number of devices controlled. Future work proposes using Ethernet and WiFi for remote control from anywhere.
Wireless home appliance control using arduino and bluetooth module
This document describes a wireless home automation system using an Arduino, Bluetooth module, and relay board. A group of students built a system to control appliances remotely using a smartphone app. The system allows controlling devices from a distance wirelessly and provides a low-cost way to create a smart home network where appliances can communicate with each other. It connects an Arduino board with a Bluetooth module to a relay board to control AC loads like lights, fans and switches remotely through an Android app.
A1 Presentation
This document describes a microcontroller-based intelligent home security system using wireless sensor networks and GSM. The system detects intruders using infrared, temperature, and light sensors and alerts the homeowner via text message if any sensors are triggered. It uses an AT89S52 microcontroller to process sensor data and an attached GSM module to send notifications. The system is designed to provide low-cost home security and real-time intruder alerts.
What's hot (20)
Voice recognition based home automation system for paralyzed people
Voice recognition based home automation system for paralyzed people
Citylum CircaLED product features list for project specification
Citylum CircaLED product features list for project specification
Home automation in kerala ,home automation in calicut , home automation
Home automation in kerala ,home automation in calicut , home automation
Home Automation System using ZigBee and PandaBoard as a Gateway (HAS-ZP)
Home Automation System using ZigBee and PandaBoard as a Gateway (HAS-ZP)
Presentation on bluetooth controlled electronic home appliances
Presentation on bluetooth controlled electronic home appliances
Remote-Monitoring and Energy-Saving Room Architecture with Security System ba...
Remote-Monitoring and Energy-Saving Room Architecture with Security System ba...
voice recognition based home automation system using arm-7
voice recognition based home automation system using arm-7
Wireless home appliance control using arduino and bluetooth module
Wireless home appliance control using arduino and bluetooth module
Similar to Smart Remote
AiN Live and learn Conference - 2017
IPDATATEL provides alarm communication devices that enable alarm systems to use cellular and internet connections. Their products include dual-path communicators with cellular and internet connectivity, single-path cellular communicators, and Z-Wave controllers. IPDATATEL devices reduce costs for alarm dealers by enabling remote programming which reduces truck rolls by up to 75%. They also provide mobile apps for remote arming/disarming and smart home control. IPDATATEL's goal is to help alarm dealers increase their business and profits while adapting to changes in communication technology.
Security system using Arduino
The objective of this project is to design and develop a wireless communication link to monitor our organizations that require high security like Banks , Offices etc.
Home automation using blynk app with fan direction control and displaying sta...
Home automation using blynk app with fan direction control and displaying sta...Diwash Kapil Chettri
The document presents a mini project on controlling electrical appliances using IoT. The project uses an ESP8266 WiFi module, an L298 motor driver, relay modules, and an LCD display to interface appliances like bulbs, fans, and AC units. A smartphone app allows remote control and monitoring of devices. The system provides convenience, energy savings, and security for smart home automation. Challenges include data security and lack of standards. The project aims to address increasing demand for smart homes with remote control and data collection capabilities.Home Automation using NodeMCU .docx
The main objective of this project is to develop a home automation system using an Arduino board with Bluetooth being remotely controlled by any Android OS Smartphone. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches
DTMFJOYHO.pptx
The aim of the proposed system is to develop a cost effective solution that will provide controlling of home appliances remotely and enable home security against intrusion in the absence of homeowner. The system provides availability due to development of a low cost system. The home appliances control system with an affordable cost was thought to be built that should be mobile providing remote access to the appliances and allowing home security. Though devices connected as home and office appliances consume electrical power. These devices should be controlled as well as turn on/off if required. Most of the times it was done manually. Now it is a necessity to control devices more effectively and efficiently at anytime from anywhere.
final ppt.ppt
This document outlines a proposed smart home system with energy consumption monitoring and flood alert security features. It begins with an abstract describing how smart home systems can provide security and access control while allowing remote monitoring. The document then reviews the existing GSM-based system and its disadvantages before proposing a new WiFi-based system using sensors to detect intrusions and monitor things like temperature, gas leaks, water levels and energy usage. It provides block diagrams of the system components and interfaces. The proposed system is said to allow remote control of home appliances via mobile while minimizing energy use and costs.
IRJET- Designing of Smart Switch for Home Automation
This document describes a smart switch designed for home automation. The smart switch allows users to control home appliances like lights and fans wirelessly through an Android application or voice commands. It uses an ESP8266 WiFi module to connect appliances to the Adafruit server and relay commands from a smartphone to devices via a relay board. The system provides a low-cost way to automate homes and make appliances accessible remotely or through simple voice controls, offering convenience for all users including those with disabilities. Sensors may also be integrated to allow for automatic control based on temperature or other factors. The smart switch implementation achieves the goals of remote home device management through a mobile-friendly interface.
IRJET- Android based Home Automation using Bluetooth Technology
This document describes a home automation system that uses an Android app and Bluetooth technology to control electrical appliances in a home. The system uses an Arduino microcontroller connected to sensors, relays, and appliances. An Android app allows users to control lights and fans by sending commands via Bluetooth to the microcontroller. The system is designed to assist elderly and disabled people by allowing remote control of devices without needing to physically switch them on or off. A motion sensor is also used to automatically turn lights on and off depending on whether a person is detected in the home.
IRJET- Android based Home Automation using Bluetooth Technology
This document describes a home automation system that uses an Android app to control home appliances via Bluetooth. The system uses an Arduino microcontroller connected to appliances like lights and fans through relays. A PIR motion sensor is also used to automatically turn lights on and off when motion is detected. The Android app allows users to control appliances from their phone through simple on/off buttons. When a button is pressed, a Bluetooth command is sent to the microcontroller which operates the relays as needed to control the appliances. The system is designed to help elderly and disabled individuals control home devices remotely with their phone.
Software Project Management
The document outlines a smart home project consisting of 4 group members: Abeer Ehsan Rashid, Faraz Asad, Usama Khan, and Tamoor Ahmed. The project aims to remotely control household appliances using a microcontroller for convenience and security. Key goals are to remotely access appliances, keep the house secure, and make everything controllable. The estimated 1-year scope includes security, light/temperature automation, and wireless control systems. Stakeholders include clients and sponsors, with Faraz Asad as project manager. Potential risks include electricity consumption, internet dependency issues, and lack of response without connectivity.
Lighting IoT
This document discusses how enterprise Internet of Things (IoT) technologies can enable business transformation through connected lighting and building infrastructure. It describes how legacy building networks operate in silos and the trend toward low-voltage connected devices and IP convergence. The benefits of Cisco's UPOE (Universal Power over Ethernet) and connected lighting solutions are presented, including energy savings, improved experiences, facilities optimization, and enabling new IoT analytics applications. The Talem IoT development kit is introduced as a way to connect USB sensors and devices to the network over Ethernet using Power over Ethernet.
DEVNET-1185 Business Transformation with Enterprise IOT
This document discusses how enterprise Internet of Things (IoT) technologies can enable business transformation through connected lighting and building infrastructure. It describes how legacy building networks operate in silos and the trend toward low-voltage connected devices and IP convergence. The benefits of Cisco's UPOE (Universal Power over Ethernet) and connected lighting solutions are presented, including energy savings, improved experiences, facilities optimization, and enabling new IoT analytics applications. Finally, the document introduces TALEM, Cisco's IoT device kit that allows any USB device to be connected over Ethernet using Power over Ethernet, extending the reach of IoT in an enterprise.
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
1. The document describes an IOT-based digital notice board system using an Arduino microcontroller that can display notices and announcements via a LED display board.
2. The system consists of an Arduino board connected to a GSM module to receive text messages. When a message is received, the Arduino sends it to control the LED display board. This allows notices to be sent remotely via text and displayed wirelessly.
3. The system aims to provide a low-cost electronic notice board that allows quick dissemination of notices without delays. Notices can be sent from anywhere via the mobile network connected GSM module and displayed immediately on the LED board.
Group-3
This presentation summarizes a student project on developing a home automation and security system using GSM technology. It was prepared by three students for their department supervisor. The presentation outlines the objectives, which are to develop a wireless home automation system using GSM to remotely monitor and control devices. It describes the basic working of the system with a microcontroller receiving SMS commands from a mobile phone to operate devices. The hardware and software components used are also summarized, along with the advantages of flexibility, security and power savings enabled by the remote control functionality.
home automation pdf.pdf
This document presents a home automation system project using Node MCU. The system allows controlling electronic devices in the home remotely using an app and internet connection. It uses hardware components like Node MCU, relays, LEDs, motors, and sensors connected to a breadboard. The Node MCU runs code from the Arduino IDE and connects to the Blynk app for remote control of devices. The system provides benefits like convenience, energy savings, and home security when controlled from anywhere using a mobile device.
IRJET- Multi-Featured Android Controlled Smart Car
1) The document describes the design and implementation of an Android-controlled smart car. The car uses an Arduino microcontroller, Bluetooth module, DC motors, batteries, and a WiFi camera to be controlled remotely via an Android application.
2) The user can control speed and direction of the car through the Android app. The app communicates with the Arduino via Bluetooth, which then controls the motors. A separate phone can view live video streaming from the WiFi camera.
3) The system allows remote control and monitoring of the car. Future work may include adding sensors and voice control capabilities.
IRJET- Multi-Featured Android Controlled Smart Car
1) The document describes the design and implementation of an Android-controlled smart car. The car uses an Arduino microcontroller, Bluetooth module, DC motors, batteries, and a WiFi camera to be controlled remotely via an Android application.
2) The user can control speed and direction of the car through the Android app. The app communicates with the Arduino via Bluetooth, which then controls the motors. A separate phone can view live video streaming from the WiFi camera.
3) The system allows remote control and monitoring of the car. Future work may include adding sensors and voice control capabilities.
home automation.pptx
The main objective of this project is to develop a home application system using an Arduino board with Bluetooth being remotely controlled by any Android OS smart phone.
As technology is advancing so houses are also getting smatter
Android controlled remote password security
This document describes a password-based security system that uses a microcontroller, Bluetooth device, and Android application. The system allows authorized users to change passwords as needed and control security and access for homes, garages, and offices remotely. It provides security through password protection and ease of use through automation. The system involves pairing a Bluetooth device connected to a microcontroller with an Android application to send and receive control data wirelessly. It has applications for residential and organizational security with authorized access.
IoT Based Home Automation System_revised_27_06_2021.pptx
This document describes the design and implementation of a home automation system using IoT. The system uses an Arduino microcontroller connected to various sensors to monitor temperature, gas, fire and motion. When thresholds are exceeded, the system triggers appliances like exhaust fans and alerts authorities via SMS. It allows remote monitoring and control of home appliances over WiFi. The objectives are to develop a low-cost home security, safety and energy saving system. Block diagrams and lists of equipment are provided. Advantages include easy access and control from anywhere, reduced human intervention, improved safety and efficiency.
Similar to Smart Remote (20)
Home automation using blynk app with fan direction control and displaying sta...
Home automation using blynk app with fan direction control and displaying sta...
IRJET- Designing of Smart Switch for Home Automation
IRJET- Designing of Smart Switch for Home Automation
IRJET- Android based Home Automation using Bluetooth Technology
IRJET- Android based Home Automation using Bluetooth Technology
IRJET- Android based Home Automation using Bluetooth Technology
IRJET- Android based Home Automation using Bluetooth Technology
DEVNET-1185 Business Transformation with Enterprise IOT
DEVNET-1185 Business Transformation with Enterprise IOT
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
IRJET- Multi-Featured Android Controlled Smart Car
IRJET- Multi-Featured Android Controlled Smart Car
IRJET- Multi-Featured Android Controlled Smart Car
IRJET- Multi-Featured Android Controlled Smart Car
IoT Based Home Automation System_revised_27_06_2021.pptx
IoT Based Home Automation System_revised_27_06_2021.pptx
More from ABIN VARGHESE
Water Pollution
Water Pollution Water Pollution occurs when energy and other materials are released into the water, contaminating the quality of it for other users
Step count sensor
Main components : the 6-axis inertial module LSM6DSL or LSM6DSM, and the eCompass LSM303AH. These MEMS (Micro Electro-Mechanical Systems) are very popular with manufacturers of mobile devices, because of their precise sensors.
Technovalley RedHat
Red Hat is a leading provider of open source software solutions for businesses. Founded in 1993, it has over 9,000 employees and annual revenue of $1.5 billion. Red Hat is best known for Red Hat Enterprise Linux, its commercially supported Linux distribution used widely by large enterprises. It offers a range of training courses and certifications in Red Hat technologies to help individuals and companies implement and manage Red Hat solutions. While it faces competition from other Linux vendors, Red Hat has established itself as the dominant player in the enterprise Linux market due to its strong brand, support offerings, and contributions to the Linux kernel.
Entrepreneurship Development Programme
This document discusses starting a startup early, even as a student. It notes that India ranks poorly in business reports and ease of doing business. However, opportunities and information accessibility are limitless now. The Kerala Startup Mission is an ambitious incubation program. The document advocates treating final year college projects as startups, choosing topics of interest. Students who start forming companies and prototypes can receive attendance and grade concessions. Even if the startup fails, the experience will be valuable. Graduates with startup experience will have more impressive profiles than those just focusing on grades. Resources like Microsoft and Fab Labs are available to help.
WiFi Cluster Block Diagram
“ATM Based Cluster Wi-Fi & Locker System” allows an individual to use
public Wi-Fi and a locker facility after swiping the ATM card on the
ATM card reader which is interfaced to the microcontroller. After
checking the credentials, money for the requested usage is deducted
from the bank account. Then an OTP is sent to the person's mobile
phone via GSM. This OTP will get detected by the dedicated
smartphone app and the internet access is automatically activated.
ATM based cluster Wi-Fi & locker system
“ATM-Based Cluster Wi-Fi & Locker System” allows an individual to use
public Wi-Fi and a locker facility after swiping the ATM card on the
ATM card reader which is interfaced to the microcontroller. After
checking the credentials, money for the requested usage is deducted
from the bank account. Then an OTP is sent to the person's mobile
phone via GSM. This OTP will get detected by the dedicated
smartphone app and the internet access is automatically activated.
Autonomous drone project part 1
Autonomous drone - indoor navigation
Lightweight frame design
Indoor Wi-Fi repeater with maximum coverage
GPS integration
Direction detection by compass
Calibration by Gyroscope
Cyber hacking dev days by aes team
Hacking is an act of penetrating computer systems to gain knowledge about the system and how it works. This is considered illegal since it is like breaking into someone’s house.
Intelligent irrigation system
Importance of eco friendly technologies
Global warming : Indian prospective
Fallout of chemical rains
Centralized irrigation monitoring
Internet of things (IOT)
Cross platform app
Open source integrated development environment
Research and research methodology
This document discusses various aspects of research and research methodology. It defines research as a careful investigation to advance knowledge. The main objectives of research are to discover answers and find hidden truths. Research can be motivated by various factors like the desire for career benefits or intellectual enjoyment. The document outlines different types of research such as descriptive vs analytical and quantitative vs qualitative. It also discusses key research approaches like the inductive approach which moves from specific to general and the deductive approach which goes from general to specific. The qualitative approach relies on subjective assessments while quantitative is data-based. In conclusion, the document provides an overview of key concepts in research.
More from ABIN VARGHESE (10)
Recently uploaded
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Recently uploaded (20)
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Smart Remote
- 1. SMART REMOTE REPLACING CONVENTIONAL REMOTE BY SMART REMOTE GROUP MEMBERS: • ABIN VARGHESE, 3 • AJITH JACOB, 8 • AJMAL KM, 9 • AJMAL KMM, 10 GUIDE: • DARSANA VIJAY 05-02-2015ICET, ECE DEPT. 1
- 2. 05-02-2015ICET, ECE DEPT. 2 CONTENTS INTRODUCTION ABSTRACT BLOCK DIAGRAM CIRCUIT DIAGRAM TIME SCHEDULE ESTIMATED COST CONCLUSION
- 3. INTRODUCTION • Remote control is almost a standard accessory for most home applications, like TV, Hi- Fi, security system and so on. • This project aims to create a smart phone based remote control for all major electrical & electronics equipment. • This is a simple project based on smartphone consist of four major parts 1. Replacing conventional remote of satellite receiver & DVD player 2. Electronic gust notification for home security 3. Simple home automation within the building 4. PWM based light dimmer 05-02-2015ICET, ECE DEPT. 3
- 4. ABSTRACT “SMART REMOTE” is combination of hardware and utility app, so that can integrate all our remote commands into one Android device. Bluetooth module is the 1st level communication medium that can talk with android panel & controller. In 2nd level of communication added an infrared emitter to that controller is capable of sending IR commands just like conventional remote. PIR sensor interrupt the controller when the presence of guest and will get a notification on Android panel. This project is capable to switch on & off the power devices and control the intensity via PWM. 05-02-2015ICET, ECE DEPT. 4
- 5. BLOCK DIAGRAM 05-02-2015ICET, ECE DEPT. 5
- 6. CIRCUIT DIAGRAM 05-02-2015ICET, ECE DEPT. 6
- 7. IR DECODING CIRCUIT 05-02-2015ICET, ECE DEPT. 7
- 8. ANDROID PANEL 05-02-2015ICET, ECE DEPT. 8
- 9. CONCLUSION • This is simple cost effective project that have multiple purposes. • This project can replace no. of remotes in to a single one. • It is more efficient than general purpose remote. • This project will enhance the home security. • This project is capable for home & small offices automation. • All the smart phone with Bluetooth connectivity is compatible for this project. • Smart fan speed regulator can also be implemented using this project. 05-02-2015ICET, ECE DEPT. 9
- 10. REFERENCE 05-02-2015ICET, ECE DEPT. 10 • ARDUINO UNO SUPPORT • HTTP://WWW.INSTRUCTABLES.COM/ • HTTP://WWW.TECHBITAR.COM/ • ATMEGA823P DATASHEET • IC293D & IC4050 DATASHEET