The document provides a career summary for an electrical engineer with over 12 years of experience in offshore electrical design. It lists engineering projects the candidate has worked on, including various offshore vessels and FPSOs. Responsibilities included electrical design work such as preparing drawings, cable schedules, coordinating with vendors, and addressing site queries. The candidate's experience includes working as an electrical engineer/3D modeler for multiple companies in Singapore.

1. CAREER SUMMARY:
Electrical Engineer in Offshore Electrical Engineer Design having 12.6+
years of experiences in Electrical Design with various onshore/offshore projects as well as
fabrication yard.Job encompasses of reviewing and interpreting of relevant documents such
as specifications, data sheets and vendor data prior to the application of design work
procedures for the preparation of electrical deliverables and adept in AUTOCAD software
and Microsoft Applications. Possesses good oral and written communication skills.
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:
WORK EXPERIENCE:
Electrical Engineer
Keppel Singmarine Pte Ltd
1. H381 DLV2000
2. BSY H105 38m Crewboat (80 Pax)
3. H387_388 65T BP Tug
4. H390 RAmpage 5500 100T AHT
May 2015 to DEC 2015
Keppel O&M, integrating the experience and expertise of Keppel FELS, Keppel Shipyard,
Keppel Singmarine and its yards overseas, was established in 2002.
A wholly-owned subsidiary of Keppel Corporation, Keppel O&M is one of the largest offshore
and marine groups in the world. It has a strategic network of 20 yards serving regions
including Asia Pacific, Gulf of Mexico, Brazil, Caspian Sea, Middle East and the North Sea.
In Floating Production Storage and Offloading (FPSO) and Floating Storage and Offloading
(FSO) conversions, Keppel O&M is also the world leader.
It is a leading ship repairer for LNG and LPG carriers and a niche player in specialized
conversions and construction.
Its expertise in specialized new building extends to a wide range of small to medium-sized
customized vessels including Anchor Handling Tug Supply vessels, multipurpose support
vessels and cable ships for a worldwide clientele.
Candidate Name Munirathinam Veerabharathi
Position Applied for Electrical Design Engineer
Nationality & Visa Status in SG Indian & Employment Pass (+65 83487456)
Date of Birth 07.06.1987
Education
DIPLOMA IN ELECTRONICS AND COMMUNICATION
ENGINEERING
B.LIT (TAMIL) – DEGREE
MASTER BUSINESS ADMINISTRATION
Mobile No & E-mail id VEERA7460@GMAIL.COM
Availability Immediately

2. Committed to on-time and on-budget deliveries, Keppel O&M is the Provider of Choice for the
global offshore and marine industry.
Projects : FSO H381 DLV 2000 – Lukoil, Multi-Purpose Ice Breakers, Offshore AHTS Supply
Vessels,
Ice Class AHTS Vessel, Multi-Purpose Platform Vessel, DP II Derrick Pipe lay Vessel
Job Title : Electrical Engineer.
Roles & Responsibilities
Leading project in designing detailed electrical drawings for site installation like cable ladder
routing & penetration layout, engine control room and bridge control consoles equipment layout &
General Arrangement layouts. Attend the meeting with Project teams, Owners and surveyors.
1. BSY H105-E779-21 (ALARM MONITORING SYSTEM BLOCK DIAGRAM)
2. BSY H105-E779.22 (ALARM MONITORING SYSTEM TERMINATON DIAGRAM)
3. BSY H105-E779.23 (ALARM MEASURING POINTS)
4. BSY H105-E657.02 (HVAC SYSTEM TERMINATOIN DIAGRAM)
5. BAY H105-E640.42 BOW THRUSTER ENGINE CONNECTOIN DIAGRAM
6. BSY H105-E505.01 NAVIGATION / SIGNAL LIGHT SYSTEM PROCEDURE.
7. BSY H105-E513.01 ELECTRIC HORN TEST PROCEDURE
8. BSY H105-E679.31 Engine Telegraph System Diagram
9. BSY H105-E666.92 RevA_Main Generator Connection Diagram
10. H390-E210 EMERGENCY STOP FOR PUMPS & VENTILATION FANS DISPOSITION
DRAWING
11. H390-E209.01 TANKS LEVEL SWITCHES AND REMOTE SOUNDING DISPOSITION DRAWING
12. H390-E209.02 BILGES LEVEL SWITCHES DISPOSITION DRAWING

3. 13. H385-E217.42_r1_ (SFI461)_CCTV & NIGHT VISION DISPOSITION (MAIN DECK-MID)
(ACCOMMODATION DECK) , (FORECASTLE DECK), (WHELLHOUSE DECK)
14. H383-E655.08 (SFI57) MACHINERY SPACE FIRE DAMPER CONTROL PANEL CONNECTION
DIAGRAM
15. H383-E217 CCTV DISPOSITION (MAIN DECK-MID), (ACCOMMODATION DECK) ,
(FORECASTLE DECK), (WHELLHOUSE DECK)
16.230V AC DISTRIBUTION SINGLE LINE DIAGRAM (H390-E103.01, H390-E103.02, H390-
E103.04, H390-E103.05, H390-E103.06
17. H387/388 drawing for Z-Peller Control System Cable Connection Diagram
18. E607 - Emergency Stop Connection Diagram.
19. H387/388 drawing for H387-E614_FIFI CLUTCH CONTROL PANEL SYSTEM
20. E651.51 - WINDOWS WIPER BLOCK DIAGRAM
21. E651.52 - WINDOWS WIPER CONNECTION
22. H105/H107 - of Navigation light system cable plan drawing
Drawings
H381-E702.51(FS51) VMS Single Line Diagram
H381-E702.45(FS51-01) VMS Single Line Diagram
H381-E702.46(FS51-02) VMS Single Line Diagram
H381-E702.52(FS52) VMS Single Line Diagram
H381-E702.47(FS52-01) VMS Single Line Diagram
H381-E702.48(FS52-02) VMS Single Line Diagram
H381-E702.53(FS53) VMS Single Line Diagram
H381-E702.49(FS53-01) VMS Single Line Diagram
H381-E702.50(FS53-02) VMS Single Line Diagram
H381-E702.54(FS54) VMS Single Line Diagram
H381-E702.55(FS54-01) VMS Single Line Diagram
H381-E702.56(FS54-02) VMS Single Line Diagram

4. H381-E702.52(FS52) Connection Diagram
H381-E702.49(FS53-01) Connection Diagram
H381-E702.51(FS51) Connection Diagram
H381-E702.53(FS53) Connection Diagram
H381-E702.45(FS51-01) Connection Diagram
H381-E702.46(FS51-02) Connection Diagram
HVAC DRAWINGS PREPAREATION
H381-E655.01 REFRIGERANT DETECTION SYSTEM
H381-E655.02 Chiller System Electrical Diagram
H381-E655.03 HVAC System Accomodation Area (AHU)
H381-E655.04 HVAC System Machinery Area (AHU)
H381-E655.05 HVAC System Fan Coil Contorl Units
H381-E655.06 HVAC System AC Package Unit (3 Sheets)
H381-E655.07 HVAC System AC Split Unit
H381-E655.08 HVAC System Shutoff Damper Control Panel
H381-E655.09 HVAC System Machinery Area Ventilation Fan Panel
H381-E655.10 HVAC System Machinery Area Group Ventilation (Fan)
H381-E655.11 HVAC System Refrigeration Plant (Cold Room)
H381-E655.12 HVAC System Reheater
H381-E655.13 HVAC System Engine Room Fan Control Panel (VFD)
H381-E655.14 HVAC System E-Gen HVAC Room Panel
H381-E655.15 HVAC System HVAC Control Panel
H381-E655.16 HVAC System Water Tight Valve Control Diagram
HVAC systems - Sequence of Operations
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:
ELECTRICAL DESIGN ENGINEER
DYNA-MAC ENIGNEERING PTE LTD
Duration: Mar 2014 to Mar 2015
Dyna-Mac Engineering Services Pte Ltd – SINGAPORE

5. (DME-JNS728-JNS732) Kraken FPSO - BAB 002 1020
Client: FPSO BUMIARMADA
(DME-JNS642-JNS678) FPSO CIDADE DE MARICA- HI 39621
Client: FPSO SBM OFFSHORE
(DME-JNS659-JNS680) FPSO CIDADE DE SEQUAREMA- HI 39622
Client: FPSOSBM OFFSHORE
(DME-JNS631-640) FPSO STONES - HI 39600
Client: FPSO SHELL STONES
(DME-JNS708-JNS717) TEN Development Project - FPSO Package
Client: FPSO MODEC
(DME-JNS728-JNS732) Kraken FPSO - BAB 002 1020
Client: FPSO EQ KRAKEN
UZ750-P6059 ZADCO Island Development-PAU's
Client: PEROFAC
(DME-JNM722-JNM724) B357 & 360 & 361 - Keppel Fels B class
Client: FPSO KEPPEL FELS
(DME-JNS728) - M30A Seperation Module
Duties & Responsibilities:
WORKING AS ELECTRICAL ENGINEER/3D MODELLER & RESPONSIBLE FOR THE COMPLETE 3D
MODELLING OF CABLE LADDERS/TRAYS & LADDER, ELECTRICAL EQUIPMENTS, TELECOM CABLE
TRAYS & TRAY SUPPORTS, TELECOM EQUIPMENTS.
ACTIVELY INVOLVED IN THE PREPARATION OF LAYOUTS FOR E-HOUSE & INTEGRATION B/W E-
HOUSE TO OTHER TOPSIDE MODULES & ACCOMMODATION MODULES.
PREPARATION OF ELECTRICAL CABLES AND CALCULATION. HV, LV,CABLES, CONTROL,
INSTRUMENTATION AND SIGNAL CABLES, CABLE LADDERS, PANEL INSTALLATION, FIELD
INSTRUMENTS & EQUIPMENTS ARRANGEMENT, DISPOSITION, SINGLE LINE DRAWINGS & CONSOLE
ARRANGEMENT DRAWINGS, TELEPHONE, CCTV, LAN, LIGHTING, ALARM MONITORING, STARTER
CONTROL PANEL DRAWINGS, CABLE TERMINATION DRAWINGS, REMOTE CONTROL VALVE SYSTEMS
AND ALL THE SHIPPING ELECTRICAL, CONTROL, INTERFACE AND COMMUNICATION SYSTEMS
DRAWING AS FOLLOW VENDORS AND CLIENTS. ( USED AUTOCAD, PDF, MS -OFFICE)
INVOLVED IN THE PREPARATION OF CABLE TRAY SIZING, CABLE SCHEDULE & MTO.
CO-ORDINATION WITH CLIENT FOR DETAILS PERTAINING TO THE MARINE CABLES & UPDATING THE
SM3D MODEL.
VENDOR DOCUMENT REVIEW FOR HEAT TRACING PACKAGE.
ADDRESSING SITE QUERIES.
EXTRACTION OF CABLE LADDER/TRAY LAYOUTS FROM PDMS & PREPARATION OF LAYOUTS.
CO-ORDINATION WITH VENDORS FOR DOCUMENT UPDATIONS.
INVOLVED IN THE PREPARATION FOR ALL ELECTRICAL & TELECOM EQUIPMENTS IN LQM DURING
THE LIFTING OF LQM.
ADDRESSING SITE QUERIES & RESOLVING SITE PROBLEMS BY PROVIDING ADDITIONAL DETAILS AS
EARLY AS POSSIBLE TO AVOID LAG IN CONSTRUCTION PROGRESS
UPDATING AS-BUILT MODEL & LAYOUTS
EXTRACTION OF CABLE LADDER/TRAY LAYOUTS, LIGHTING LAYOUTS, POWER LAYOUTS,
INSTALLATION DRAWINGS FROM SM3D & PREPARATION OF LAYOUTS.

6. CO-ORDINATION WITH VENDORS.
WORKED AS 2D DRAUGHTSMAN AND INVOLVED IN PREPARATION OF DELIVERABLES WHICH
INCLUDES
⇒ CABLE TRAY & SUPPORT LAYOUTS
⇒ LIGHTING LAYOUTS.
⇒ POWER & CABLES CALCULATIONS HV AND LV CABLES EARTHING LAYOUT.
⇒ SINGLE LINE DIAGRAMS
⇒ INTERCONNECTION SCHEDULE
⇒ LIGHTING & SMALL POWER LOOPING DIAGRAMS
⇒ INSTALLATION DRAWINGS.
⇒ MCT SCHEDULE
⇒ MTO/BOM FOR ALL ELECTRICAL ITEMS.
⇒ SINGLE LINE DIAGRAMS.
⇒ CABLE BLOCK DIAGRAMS.
⇒ TELECOM BLOCK DIAGRAMS.
ENGINEERING PROJECTS EXPERIENCE IN SINGAPORE:
ELECTRICAL DESIGN ENGINEER
AIBEL PTE LTD – SINGAPORE
JUNE-2012 to FEB 2014
• ELECTRICAL PHYSICAL DESIGN.
• CONVERSANT WITH SHELL & OTHER STANDARDS.
• ANALYTICAL SKILLS.
• ABLE TO WORK ON OWN INITIATIVE AND AS PART OF A TEAM.
• DEDICATED TO MAINTAINING HIGH QUALITY STANDARDS.
• PROFICIENT WITH AUTO CAD, MICRO STATION, PDMS & PDS, SP3D & SPEL.
• DESIGN AND PROBLEM SOLVING SKILLS.
Duties & Responsibilities:
Power System Studies on ETAP : Load flow analysis, Short circuit study , Transient stability study,
Relay coordination study including relay settings
Calculations : Various Electrical Equipment Sizing mainly Generator, Transformer, Power Cables,
Neutral Earthing Resistors, UPS and Battery.
Various Electrical Deliverables during the phase of a project as mentioned in the Projects below,
Vendor Data Review for major electrical equipment like Generators, HV Switchboard etc.
Codes and Standards
Good Knowledge of NORSOK, IEC standards and DNV codes related to Offshore Electrical Design
and various Electrical equipment. Familiar with various other standards like IEEE, RMRS, Brazilian
NR requirements etc.

7. Worked with various Company Standards and Practices mainly SHELL DEPs, BG Standards, Conoco
Philiphs , Statoil General Standards, Petrobras standards etc.
MAIN EXPERIENCES:
Project – AIBEL PTE LTS
Client – ConocoPhillips (NORWAY)
1. Design of LV Distribution system for the whole Topsides and Marine side which consists of LV
system, Emergency System, Small power system, Lighting, Earthing, Power, UPS system.
2. Preparation of deliverables which includes Electrical Design philosophy, Induction Motor
Specification, LV Switchgear specification, Transformer Specification, UPS Specification, Cables
Specification, single line diagram for all LV System, UPS System, Electrical Load Analysis based on
process data, Preliminary Short Circuit Calculation (MVA Method), Cable sizing & Voltage Drop
Calculations.
3. Electrical Packages & UPS Package Technical bid Evaluation, Vendor Selection, Vendor Package
review
4. Protection Relay Co-ordination / Selective Co-ordination & Protection Settings and Time Current
Curves for LV system.
5. Preparation of Cable Schedule, Cable Block Diagram & Interconnection Diagram
6. Electrical / Package Engineer for Turret and Laboratory.
DESIGN EXPERINCE:
1.PDMS Checking / Modeling (Cable Tray, Lighting & Equipment)
2.Cable Tray modeling – Checks the quality of the 3D model in terms of
Cable Routing and supports requirement details.
3.Clash Review - Coordinates with client and other disciplines regarding
Clashes and interference between electrical and other equipment
(Piping, Civil Structural, Mechanical & Instrumentation)
4.Aveva Review - Aveva checking for 3D design input.
5.Handling team to give input to prepare layouts, attending model review
and Inter discipline meeting.
6. Smart Plant Electrical
a) Adding Electrical and Wiring Equipment in Electrical index
b) Creating connection in Electrical Engineer
c) Updating and Modifying properties in Table
7. Creating Nodal in PDMS Model and preparing Nodal Drawings
8. CABSYS (Cable routing software for Statoil)
9. Interconnection Diagram
10. MCT Calculation from Roxtec software
ENGINEERING PROJECTS EXPERIENCE IN INDIA
L&T VALDEL
ELECTRICAL ENGINEER

8. FEB 2010 to JUN 2012
Project: M/s. ADMA-OPCO, Abu Dhabi
PROJECTS INVOLVED (L&T VALDEL ENGINEERING LIMITED):
ELECTRICAL ENGINEER for UMM LULU PHASE-I DEVELOPMENT PROJECT
(Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
Job Profile:
• Program Development in PLC’s Allen Bradley, Siemens, Mitsubishi and Troubleshooting and
redesigning. Exposure of VFD Allen Bradley, Powerflux40 and Delta drives.
• Installation and Commissioning of Control Panel and Field Instruments.
• Calibration of Electrical and Electronics instruments and Equipments.
• Preventing Maintenance of Machines.
• Troubleshooting skills with knowledge of Instrumentation Systems & Electrical machineries.
• Weigh scale installation and commissioning.
• PLC, HMI selection as per the system requirement.
• Instrumentation selection as per the system requirement.
• Motors, pumps, Diesel Generators, CNC machineries servo motors, Drives, alarms, sensors,
solenoid valves, hydraulic systems & Air compressors, plc based automations assembly rigs,
Troubleshooting and
• Communication Protocol :- (Ethernet , Mod bus, Serial, RS232 series)
• Panel & Console drawings
• Wiring drawings
• Nest Loading & Front Loading
• Cable tray layout
• System Configuration & Control room layout
• Field ELECTRICAL & INSTRUMENT drawings
• Pre-Fab Cable Schedule

9. • Grounding layout
• Yokogawa control system drawings
• Field Cable Schedule
• Loop schematic drawings
• Preparing shop drawings, 2D and Isometric drawings for various Electrical & Mechanical
projects in Autocad.
• Job includes site supervision of installation, ensuring safety procedures are followed in
project, organizing man power in site, raising material request required at site and
ensuring project execution as per drawings and bar chart.
• Effective co-ordination with clients & consultants detailing them on project progress.
• Assisting Estimation team by providing BOQ as per available tender drawings and site
survey
ELECTRICAL ENGINEER for NASR PHASE-I DEVELOPMENT PROJECT (Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
• Preparation of overall cable tray layout & Sectional Drawings
• Interconnection cable routing
• Loop schematic drawing
• ELECTRICAL & INSTRUMENT Location layout
• Control Room layout
• System Configuration
• JBPDB Location layout
• Function Schematics
• Installation Drawing
• Loop Drawings
PROJECTS INVOLVED (L&T VALDEL ENGINEERING LIMITED):

10. • ELECTRICAL ENGINEER for NASR PHASE-I DEVELOPMENT PROJECT (Green Field)
Client: M/s. ADMA-OPCO, Abu Dhabi
• ELECTRICAL ENGINEER for UMM LULU PHASE-I DEVELOPMENT PROJECT (Brown Field)
Client: M/s. ZADCO / ADMA-OPCO, Abu Dhabi
• ELECTRICAL ENGINEER and EPC for PUO FPSO AT INDONESIA
Client: M/s. KANGEAN ENERGY INDONESIA.
• ELECTRICAL ENGINEER For B-193 5-WELL HEAD PLATFORM
Client: M/s. ONGC.
• ELECTRICAL ENGINEER For Offshore Grid Interconnectivity Project - Power to ESP
Client: M/s. ONGC.
• ELECTRICAL ENGINEER for TSJOC SRKP PHASE I DEVELOPMENT PROJECT
Client: M/s. Truong Son Joint Operating Company (TSJOC).
• ELECTRICAL ENGINEER for GENERIC GAS FPSO - Topsides
Client: M/s. PROSAFE.
• ELECTRICAL ENGINEER for NINGALOO VISION OIL FPSO – Topsides (VME Process), Brazil
Client: M/s. VME Process, Prosafe.
• ELECTRICAL ENGINEER For OCS-1 REVAMPING PROJECT
Client: M/s.PTT Public Company Limited.
• ELECTRICAL ENGINEER For CRISTAL ROC PLANT
Client: M/s. CRISTAL GLOBAL, SAUDI ARABIA.
ENGINEERING PROJECTS EXPERIENCE IN KUWAIT OIL COMPANY:
GULF SPIC GENERAL TRADING & CONTRACTING COMPANY, Kuwait City
KOC APPROVAL ELECTRICAL ENGINEER
JAN 2008 TO JAN 2010`
Project :: Updating & As-built drawing works @ All Gathering Centers (1 to 28)
& GasBoosterStations.140.150.160.170 CIPF/SWTP in KOC. 36678
• Working as Instrumentation Cad Senior Designer of Gulf Spic Trading & Contracting
Company WLL, reporting to HOD And Engineer of the Company.
• Has Executed Instrumentation Design & Drafting Works in Detailed Engineering Contracts of
the Company.
• Preparing Electrical drawings for Lighting layout, Small power with cable load schedule, Extra
Low voltages (Tele & Data, Fire Alarm, CCTV, etc...) and Schematic drawings.
• Substation panels, Incoming & Outgoing power cable raceway routing layout in accordance
with other services in the 3D Model to create plan & section drawings.
• Drafting of Instrumentation & Control cable Raceway layout & section details in secondary
substations & process plant Areas.

11. • Motor control centre (MCC) panel General Arrangement layout & MCC Panel Layout details
with three line diagram & MCC Panel cable gland details using single line diagram for all the
substations. (Total 8 Substations.)
• Co-ordinate with respective Design Engineer’s & Site Engineer’s to modify the existing
Design drawings by incorporating the changes mentioned on the RLM (Red Line Markup)
drawings.
• Preparation of shop drawings plan & Sections for Electrical & I&C Services.
• Preparation of As-Built drawings to the site Actual condition by taking physical
• Assist in detail engineering, design and specification of electrical & Instrumentation works
include design drafting of P&I drawing, JB Termination, Instrument Loop Diagrams, Panel
termination drawings, Instrument Process & Pneumatic Hook-Ups drawings, design drafting
of Single line diagrams.
• Preparing Drawings in AutoCAD and CAD works plant Cable tray layout
• Cable tray support layout
• Cable tray sizing
• Electrical and ELECTRICAL & INSTRUMENT cable schedule
• Lighting and small power layout
• Grounding layout
• Wiring diagram
• Connections lists
• Material takeoff and Bill of Quantities.
BAYTALKITEC (P) LTD, TAMILNADU.
ELECTRICAL ENGINEER
JAN-2003 to DEC 2007
For SAMKI TECK PYROLYSIS PLANT
Client: M/s. SAMKI TECK RESOURCES.
Bid- Support For B-193 Process Platform Project
Client: M/s. ONGC
Experience includes preparation of:
Basic Engineering / FEED which includes
Preparation of Electrical Design Basis,
Cable sizing and selection philosophy,
Lighting and grounding philosophy,

12. Single line diagrams,
ETAP system study,
Equipment sizing,
Preparation of specifications and datasheets,
Load analysis,
MTO preparation,
Estimation of man hours
Detailed engineering which includes
Preparation of Philosophies
Development of detailed SLDs,
Power and lighting layouts,
Electrical building layouts,
Lighting calculations, Heat tracing, MCT sizing,
Vendor information review for mechanical packages,
Vendor offer review for High Voltage Switchboard,
Personal Skills:
Hard Working, Willingness to learn, Time Management, Team player, Respect responsibilities
EDUCATIONAL BACKGROUND:
DIPLOMA IN ELECTRONICS AND COMMUNICATION ENGINEERING
B.LIT(TAMIL) – DEGREE
MASTER BUSINESS ADMINISTRATION
KNOWLEDGE AND SKILLS
• AUTOCAD (2D / 3D)
• PLANT DESIGN MANAGEMENT SYSTEM (PDMS)
• NAVISWORKS MANAGE/FREEDOM
• MICROSTATION V. 8.1
• PDS (EE RACEWAY & EQUIPMENT MODELING)
• SP3D (SMART PLANT 3D)